F33A Bonanza — Beechcraft F33A Bonanza
Fleet & certification
- Origin
- US
Safety & ops history
Other airframes worth a look
Beechcraft F33A Bonanza manuals & documents
14 documents on Sprinkle — POH, checklist, flight manual and related references. PDFs served from cdn.sprinkle.com.
The SkyView HDX System Autopilot Servo Installation Manual provides detailed instructions for retrofitting the Dynon SkyView HDX System three-axis autopilot servos into unmodified Beechcraft Bonanza 35 Series aircraft, specifically the P35 and V35BTC models. This manual is intended for aircraft technicians and pilots who are involved in the installation and maintenance of the autopilot system. It includes comprehensive guidance on materials required, installation procedures, electrical wiring, and continued airworthiness checks. The manual emphasizes the importance of following specific procedures to ensure the proper functioning of the autopilot system and compliance with certification regulations.
- The manual is specifically for Beechcraft Bonanza P35 and V35BTC models.
- Installation of the Dynon SkyView HDX System autopilot servos is detailed.
- Torque specifications for servo bolts are between 15 to 20 inch-pounds.
- Bridal cable tension should be set to 15 ± 2 pounds during installation.
- The roll servo is located on the left cabin sidewall, approximately STA187.
Airworthiness Directives
Supplemental Type Certificate
Performance Data
Pilot's Operating Handbook
Checklist
Maintenance Manual
Documents are sourced from publicly available references. Sprinkle does not host OEM-restricted materials; if you are a rights-holder and want a document removed, email privacy@sprinkle.com.