Specifications

Description

Highlights 1989 Lancair 235 2-seat airplane kit: S/N 218. All parts in like-new condition. Kit is about 60% assembled and 80% complete (requires an engine, propellor and instruments). KIT DETAILS: Kit is complete except for the engine, propellor and instruments. Propellor (not included): typically, a 2-bladed, fixed-pitch 62" (max.) propeller is used, such as an Airmaster AP433CT. Other fixed-pitch or constant-speed propellers may be used. The fuselage, wing spar, horizontal stabilizer, canopy and header tank have already been fabricated and inspected by an A&P mechanic. Comes with all hydraulic tubing and hoses, AN fittings, actuators, motors for retractable gear and wheel doors, plus all hardware, wires, hinges and rods for flight controls. Retractable-gear mechanism is completed. Electro-hydraulic system still needs to be installed. All wiring, actuators, switches, gauges, tubing, AN fittings, lamps are included. Fuel capacity: 34 gallons (tanks included). Because of the "double joggle" design of the composite body, all seams are hidden, so hardly any body work needs to be done. This design creates a flush surface and ensures a smooth, uniform outer skin, minimizing drag, Also adds structural reinforcement, strength and stability. The wing spars have been set up and meticulously installed. All assembly manuals, drawings and technical bulletins are included. 1989 Lancair 235 2-seat airplane kit: S/N 218. All parts in like-new condition. Kit is about 60% assembled and 80% complete (requires an engine, propellor and instruments). SUMMARY OF WORK REQUIRED FOR COMPLETION: Obtain and install engine, propellor and instruments (a glass panel is most commonly used). The wings and incorporated tanks need to be fabricated. The horizontal stabilizer and rudder need to be fabricated. The seats, instrument panel, pedals, flight controls, rods and wires, and electro-hydraulic system for landing gear need to be installed. Canopy has been fabricated yet needs to be installed with the kit's supplied actuators (struts). Wiring for nav and anti-collision Lights need to be installed. Radio and transponder antenae (not included) need to be installed in wings and fuselage. Final steps include sanding and painting. Estimated time to finish assembling kit: about 500 hours. No damage history; no rust or corrosion. Excellent condition (a 10/10). Located in Manitoba, Canada. Buyer has option to pick up kit or owner will deliver anywhere in Canada or the continental USA for fuel and expenses. Exterior Like new Interior Like new