Skip to main content
Total time
375 hr
Year
2025
Serial
CCK-2300-0001
Location
Yakima, United States

Specifications

Airframe

Total time
·
375.4 hr
MSN
·
CCK-2300-0001
Registry
·
United States
Based at
·
KYKM

Powerplant

Engine 1 SMOH
·
494.9

Performance (across variants)

Range
·
700 nm
Cruise
·
126 kt
Service ceiling
·
14,000 ft
MTOW
·
1,000 kg
Passengers
·
Up to 2

Avionics equipment

  • Garmin

Condition

Used

Airframe

Modified USA35(B) airfoil G-Series slotted flaps & airfoil ailerons Direct push-rod aileron controls Vortex generators Gap seals Galvanized rudder control cables Side-access baggage door Rear step to enter copilot seat Float fittings Complete 4130 reinforced fuselage Grove spring aluminum gear Goodyear 26" main gear tires 8:00 x 6" Goodyear (4 ply) nose wheel Grove wheels & brakes Two 24.5 gallon wing tanks (49 gallon capacity) Gross weight: 2,300 lbs Total Time: 375.4 Hours

Avionics

Garmin AXIS touchscreen Garmin autopilot Garmin G5 (stand-alone backup attitude indicator) Kannad 406 AF Integra ELT (with GPS) Audible stall, altitude and terrain warnings

Interior

Interior rating: 9 Ahtanum interior package - premium leather Dual flight controls Dual toe brakes PTT switches on pilot and co-pilot controls Parking brake ANR headset connections Overhead headset hooks Adjustable front and rear seats with memory foam cushions Removable rear seat TSO'd USB charging ports 12V charging port Cabin heat Cabin fresh air vents (two total) Acrylic skylight Exterior rating: 9 Evolution X paint scheme - yellow, gray and black

Maintenance

Inspection Status: Last annual / condition inspection: August 24, 2026 - no discrepancies noted Maintained by CubCrafters Special Type: Light Sport

Options

Lightweight starter 40 amp alternator Lightweight LED strobe, nav and landing lights Interior night VFR lighting package Fuel selector valve (Left, Right, Off) Lighted fuel sight gauges Fuel pump Halon fire extinguisher Front & rear seat inertia-reel 4-point harnesses

Description

2025 CubCrafters NX Cub - Garmin AXIS Avionics, Factory-Staff Built, Evolution X Paint Scheme. Experimental Amateur-Built NX Cub built by CubCrafters factory staff, featuring the Garmin AXIS touchscreen avionics suite and the Evolution X paint scheme in yellow, gray and black. Powered by a Lycoming IO-390-D3B6 with a Hartzell constant-speed propeller, autopilot, Garmin G5 backup flight display, oversized main tires and exterior baggage access. With 375.4 hours total airframe time, the a...

Comparable sales

Recorded price changes

  • 10/22/2026: $419,900
$419,900