WILDLIFE MANAGEMENT ACTIVITIES AND PRACTICES COMPREHENSIVE WILDLIFE MANAGEMENT PLANNING GUIDELINES

Landowners acquiring property that has been partitioned out of a larger qualifying tract since the previous tax year, and those who have reduced the size of their property need to be certain that the property will meet the minimum size as set by the county. Refer to Appendix B for the maximum and minimum acreages by region, and to your county Central Appraisal District office for the minimum acreage size adopted. It is important to note that regardless of the property size, it must still be appraised for open-space use before it is eligible to change over to wildlife management use. When a qualifying tract of land is broken into smaller tracts and sold, the standards for minimum eligible tract size take effect. These sizes are determined by location within the state. Within each area, the county has the ability to choose within a specified range the minimum qualifying acreage. Tracts below this minimum size are not eligible to manage for wildlife as their agricultural practice for ad valorem tax purposes. The exception is for landowners who are buying property in a Wildlife Management Property Owners’ Association. Wildlife management property owners associations are community developments similar to wildlife management co-ops, but differ in that each person buying into the neighborhood must make a legal commitment to practice a certain level of wildlife management. Deed restrictions, conservation easements, property owner agreements, or other legally binding covenants insure that the habitat for wildlife is protected and managed in exchange for landowners being able to maintain an agricultural valuation based on wildlife management. If such legally binding covenants exist, the county may set a 1% or 2% lower minimum acreage requirement. These same lower minimum acreages also apply to landowners who have habitat for threatened or endangered species or a species of concern. While the actual presence of the species on the property is not required, a qualified wildlife professional must verify that the habitat for the species does in fact exist on the property before this exception is granted by the county. Although landowners with smaller tracts of land are encouraged to work cooperatively with their neighbors for some wildlife management practices, such as conducting a population census, each landowner must also individually be doing three practices of an appropriate intensity level on their property, submit their own individual wildlife management plan and be able to qualify on their own. The Wildlife Management Plan This guide is intended to provide landowners with information to develop their own plans. The plan may be as simple or as extensive as the landowner chooses. The practices described in this guide are intended only as guidelines. Certain site-specific situations may necessitate changes that can be allowed if based on trained resource professionals’ recommendations. All landowners are required to develop and submit a wildlife management plan to the county Central Appraisal District along with their 1-d-1 Open Space Appraisal Application. All wildlife management plans must be on the form provided by Texas Parks & Wildlife Department. This form, PWD 885-W7000, is included in Appendix U. While a comprehensive and highly detailed written wildlife management plan as described in these guidelines is not required by the county, it is highly recommended that the landowner go through this lengthier exercise and use this lengthier plan as a guide when filling out the required PWD 885-W7000 wildlife management plan form. The plan must address a separate practice in at least three of the seven wildlife management categories. A wildlife management plan describes historic and current land use practices, establishes landowner goals and objectives (also family goals if desired) for the property, and describes specific activities and practices designed to benefit wildlife species of interest and their habitats. This is the landowner's plan, designed by the landowner with the possible assistance of a wildlife biologist of the Texas Parks and Wildlife Department [TPWD], Texas AgriLife Extension Service [TAE], USDA Natural Resource Conservation Service [NRCS, formerly Soil Conservation Service - SCS], Texas Forest Service [TFS], or other qualified wildlife biologist. Efforts to perform activities identified in the plan are completely voluntary on the part of the landowner, except those practices that are necessary to maintain the agricultural appraisal for wildlife management use. A complete plan will likely include elements of all seven listed wildlife management activity categories. While Texas Parks and Wildlife Department biologists are available to assist landowners in developing a wildlife management plan for ad valorem tax purposes, it should be noted that the Department’s participation is not required in order for the wildlife management plan to be valid. What Paperwork to File All paperwork for changing the land’s qualifying agricultural practice over to wildlife management must be filed with the Chief Appraiser at the county’s Central Appraisal District. No paperwork is required to be filed with Texas Parks and Wildlife Department. Landowners will need to complete a 1-d-1 Open Space Appraisal Application available from their Central Appraisal District and attach to it the completed PWD 885-W7000 wildlife management plan that is included in Appendix U. With 95% of Texas privately owned, the wildlife that belongs to the people of Texas depends on private landowners to voluntarily provide them with quality habitat. Habitat Control Grazing Management Prescribed Burning Range Enhancement Brush Management Riparian Management and Enhancement Wetland Enhancement Habitat Protection for Species of Concern Prescribed Control of Native, Exotic, and Feral Species Wildlife Restoration HABITAT CONTROL (HABITAT MANAGEMENT) Introduction Habitat is defined as the physical and biological surroundings of an organism and provides everything that a living organism needs to survive and reproduce. The three basic requirements of any wildlife species to survive and reproduce are food, water, and shelter. Quite frequently, we as land managers tend to focus on a specific wildlife species and its needs as opposed to the habitat or community in which they live. The key to managing wildlife and our natural resources is to use a holistic approach and promote healthy ecosystems. Single species deserve less attention, while the system in which they thrive requires more. Knowing how a system functions and applying the techniques with which that system developed is imperative for its continued health and existence. Ecosystems are dynamic and continuously changing. Succession is the change in plant species composition and structure over time. It is succession that we as land managers are trying to manipulate. Generally the earlier the successional stage the greater the plant diversity and the greater the number of wildlife species that are benefited. This is not to say that some species are not dependant on later successional stages or even several stages. Managing for a diversity is important. Maintaining a variety of habitat types--while at the same time promoting plant diversity in both species composition and structure within each habitat type, should be the goal of all good wildlife management programs. Aldo Leopold, who is known as the “Father of Modern Wildlife Management”, authored a book in 1933 titled Game Management. In this textbook Leopold wrote "...game can be restored by the creative use of the same tools which have heretofore destroyed it - ax, plow, cow, fire, and gun". Habitat control or habitat management, as it is most often referred, is the active application of these “tools” to the land in order to promote land health and enhanced availability of the 3 basic requirements to all wildlife species. It is very important that land managers today understand basic ecological principles of plant succession; plant growth; food chains; and water, mineral and soil nutritive cycles as they affect range, wildlife, and grazing management. This not only produces high quality habitat and animals, but also can lead to more stable conditions during stress periods such as droughts and winter. Grazing Management People often view grazing livestock as being incompatible with managing for wildlife. Although this can be the case, when properly utilized grazing can be beneficial to wildlife habitat. Focusing on good land management as opposed to strictly livestock production allows a landowner to adjust the presence or absence of livestock as well as a grazing time and intensity level that is beneficial for both plant health and diversity. Grasses evolved with grazing pressure. Historically great herds of bison roamed the central part of the United States and stayed constantly on the move in search of new forage and in front of predators. Bison came into an area, grazed it down, and left. Herds were never in any given area for an extended length of time. Sheer numbers of bison in the herd did not allow the animals to be selective about plants that were bitten; animals were forced to eat every palatable plant in an area. This type of grazing did several things to sustain a diverse mid- and tall-grass plant community. The intense pressure left a lot of tilled and well fertilized soil. It also decreased the overall quantity of grass and allowed sunlight to reach the lower growing forbs (weeds & wildflowers). Grasses with deeper root systems responded quicker during the absence of bison than those with shallower root systems. While intense for a short time period, this type of grazing provided long rest periods of the range and allowed rapid responses of annual forbs and grasses. The final result was more plant diversity and more wildlife foods. Bison opened stands of dense grasses providing more food for deer, turkey, quail, prairie chicken, and songbirds. Without grazing pressure neither the grasses nor the forbs respond the same, consequently, the diversity as well as the health of the system is diminished. Undoubtedly, bison were a major force that shaped the ecosystem. European man brought with him his own form of agriculture and the range appeared unlimited in its ability to support a great number and variety of livestock (cattle, sheep, goats, oxen, hogs, and horses). The demise of the bison and changes in land use patterns eventually brought fences and livestock which were increasingly grazed in pastures with limited or no rest periods. Forage availability and production is dependant on stocking rates, rest, and rainfall. Sedentary grazing or limited rotation grazing with even average stocking rates and rainfall can create severely abused and overgrazed range. Grasses are continually grazed beginning with the most palatable first and on down the line until the plant community consists primarily of less desirable shallow rooted grasses and a few undesirable forbs. Overall plant diversity decreases. An abused range lacks adequate groundcover and available browse to support healthy livestock and wildlife populations. Overgrazing with domestic livestock causes problems in managing for healthy ecosystems. Good grazing management starts with the basics: 1) the kind and class of livestock grazed 2) stocking rate or intensity 3) duration of grazing to provide rest periods for the pastures and 4) excluding livestock from sensitive areas to promote vegetation protection and/or recovery. In an ideal livestock grazing program, the goal should be high intensity - short duration. The stocking rate is such that every plant should be bitten off once during each grazed period or rotation. Sedentary grazing allows plants to be bitten over and over starting with the most palatable first. The less desirable plants keep growing while the more palatable ones continue to get bitten. This can result in a pasture being underutilized but still overgrazed and eventually the removal of the most desirable species. Having enough animals to bite the plants only once means livestock can only stay in one place for a short period of time before they have to be moved to another pasture. A high intensity - short duration grazing requires a number of pastures within the grazing system to allow for extended rest periods. High intensity - short duration grazing systems allow livestock to act as a tool to manipulate and enhance wildlife habitat and plant diversity as the bison did historically in our grassland and savannah ecosystems. There are a number of variations of this system; finding one that you are able to implement on your property is the key. If it is unrealistic to divide a property into enough small pastures to both sufficiently graze and rest the range, a small landowner may want to contact neighbors to pool property and allow each property to serve as a pasture in a grazing rotation. Properties without these options may have to use prescribed burning and/or mowing to achieve some of the results and benefits of grazing. For additional information see Appendix D. Contact the Texas Parks and Wildlife Department’s Kerr Wildlife Management Area at 830-238-4483 or write to Kerr WMA, 2625 FM 1340, Hunt, TX 78024 to schedule a visit and see the effects of both grazing systems and “over-rest” situations. Prescribed Burning Bison were not the only major force shaping the ecosystem in which pronghorn antelope, black bear, wolf, white-tailed deer, turkey, quail, and prairie chicken also thrived historically. Fires, natural and man-made, played an integral role in perpetuating that system. Fire is a natural ecological factor to which native vegetation is well adapted. Since the 1850s, because man has suppressed fire, the grasslands and savannahs that were once dotted with occasional mottes of trees and forests or along drainage systems are now dominated by brush and woodlands. Europeans suppressed fire to prevent damage to wooden structures, farmlands, fences, and grazing lands. In turn this eliminated or reduced the role that fire played in maintaining ecosystems that were dominated by herbaceous vegetation. Prescribed burning is the planned application of fire to set back plant succession. It improves habitat and plant diversity and returns nutrients to the soil. Burning can improve accessibility, increase both quantity and quality of forage and browse production, suppress brush and cactus, improve grazing distribution of livestock and wildlife, and remove excessive thatch and debris. Prescribed burning is a tool used to maintain desired vegetation composition and structure. Achieving a management objective requires a particular set of conditions for burning and a specific type of fire or burn prescription. A burn prescription defines the range of conditions and factors under which a fire boss will light a fire to meet these specific objectives. Factors that influence the type of fire and its intensity include time of the year, fuel quantity and moisture, air temperature, humidity, soil moisture, wind speed, geographic area, and direction of the flame front movement in relation to the wind. Generally summer fires are hotter type fires and winter-spring fires are cooler burning fires. As fuel quantity goes up and fuel moisture goes down, the the intensity of a fire increases. The same goes for higher the wind speed and air temperature: the lower the humidity and soil moisture, the hotter the fire. Fire set to move in the same direction as the wind is a called a headfire, whereas fire set to move against the wind is a backfire. Headfires burn hotter than backfires. The plant response after a fire is influenced by fire intensity, plant condition at the time of the burn as well as weather conditions and grazing management practices following the burn. For example, forbs are prolific seed producers and valuable resource for white-tailed deer and other wildlife species. Forb seedlings are highly susceptible to fire, and a late winter burn after annuals have germinated may reduce forb production for the following growing season. A winter burn used to target certain evergreen trees or shrubs, such as Ashe juniper (cedar) or yaupon holly, is less likely to harm deciduous trees such as oaks than a late summer fire used to target the same species. Burned pastures can be grazed immediately to reduce grasses that compete with forbs or to make use of now palatable prickly pear and then deferred to allow the pasture to rest. White-tailed deer and exotic wildlife numbers may have to be reduced prior to burning to allow time for preferred plants to reestablish following the burn. A successful prescribed burn includes 3 basic steps: 1) develop a burn plan which should include management goals and objectives, burn prescription, safety plan, description and map of the burn unit, smoke management, legal requirements, contacts and notifications, control and firing plan, and evaluation 2) a safe and effective execution of the burn on the planned site and 3) good range, livestock, and wildlife management to maximize the effects of the burn. Inexperienced managers should ask for assistance and/or advice from agencies such as Texas Parks & Wildlife or the Natural Resources Conservation Service. While instructional materials are available, it is suggested that the novice assist on a burn conducted by an experienced person before attempting a prescribed burn. In some parts of the state, landowners have banded together to form prescribed burning associations to share knowledge, equipment and assist each other in conducting controlled burning. For additional information contact the Texas Parks and Wildlife Department’s Kerr Wildlife Management Area at 830-238-4483 or write to: Kerr WMA, 2625 FM 1340, Hunt, TX 78024 to schedule a visit and see the effects of a good prescribed burn program. Range Enhancement Mismanagement and overgrazing can lead to abused rangeland. Continuous over- utilization by livestock and/or white-tailed deer and exotics can remove certain desirable and highly palatable plants from a system. In many areas, plant communities now consist of lower stage succesional species of native annual and perennial cool season grass and forb or other non-native plants. Past land use practices such as mechanical clearing or farming may cause some plants to become rare or even nonexistent on certain ranges. Range enhancement is the re-establishment or enhancement of plant communities with native grasses and forbs. These plants provide both food and cover for wildlife and help to meet the three basic requirements. Seeding mixes should provide for maximum native plant diversity and should include several broadleaf native perennial plants which are important forage for wildlife and seed production. Range enhancement should include appropriate plants or seed mixtures as well as approved methods for planting in the particular ecological region where the property is located. Non-native species are not recommended and should be used only in rare and very specific cases. Even then non-natives should not exceed 25% of the seeding mix. Managing, restoring, and/or protecting native grass prairies is also considered range enhancement. This may or may not include actual reseeding but could include utilizing some of the “tools” to manage for the earlier successional stages of a native prairie. Grazing, burning, and mechanical disturbance (mowing or plowing) are all options to manage and restore native prairie. For additional information see Appendix E. Brush Management Historically, bison and fire had a significant impact on plant communities, but with the removal of these major influences plant communities have changed. Without fire and a high intensity - short duration type grazing regime, plant communities began to see an increase in woody plant species and a change from grassland or savannah communities to more brushland or woodland habitat types. As brush continues to increase and forms closed canopies, cutting off sunlight to the area underneath, grass and forb production as well as overall diversity decreases. Some woody species such as Ashe juniper tend to increase at rates greater than others, and can begin to dominate a system. Ashe juniper has had a tremendous impact on the ecosystem by causing an increase in soil erosion and significantly less water absorption. Cedar brakes lose a significant amount of precipitation through transpiration and overland flow, leaving much less water for aquifer recharge to insure adequate groundwater in the future. As mentioned before, a diversity in both plant composition and structure within different habitat types is the key to successful wildlife management. An area that is dominated by any single type or species of plant is rarely going to meet the needs of even a single species of wildlife. Using the “tools” that Leopold described is the key to managing your property and providing the adequate amount and arrangement of brush, trees, grasses and forbs to meet the needs of a wide variety of wildlife species. Although a good grazing management and prescribed burn program can reduce the need for brush management, use of the “axe” may be necessary where other methods are not practical or cost effective. A real axe is rarely used in the 21st century when dealing with extensive brush or woody encroachment. Today, chainsaws, herbicide and mechanical equipment such as bulldozers or tree shears take its place and are used to manipulate problematic invasive woody vegetation. Brush management is only part of a good habitat management program and should be planned carefully to address overall management goals. The primary principles that drive any good brush management program are: 1) extent 2) pattern 3) selection and 4) method. The extent to which brush is going to be cleared is the first step in developing a program. Overall goals of the property should be examined and can help to dictate the amount of clearing needed to meet wildlife, livestock and/or aesthetic expectations. Clearing 100% of the brush may be best from a livestock production standpoint, but if your overall goal includes white-tailed deer management, you may only want to clear 50% or less. Removal of only individual plants may be all you need to do depending on the amount of brush you have. The pattern in which brush is cleared should consider wildlife cover and accessibility. This may include cover from predators, nesting cover, loafing cover or roosting cover. Maintaining travel corridors that link sections of brush is also very important. Selection includes both the site and the species of brush to be cleared. The site of brush clearing is important to make sure potential soil erosion is kept to a minimum. Soil type and slope should be considered. Certain soils may also be selected for clearing because of better forage production. Removal of desirable plant species used by wildlife for food and cover should be kept to a minimum. The method(s) used will be determined by a total cost analysis, soil erosion issues, and the type or species of brush which is being targeted. For additional information contact the Texas Parks and Wildlife Department’s Kerr Wildlife Management Area at 830-238-4483 or write to Kerr WMA, 2625 FM 1340, Hunt, TX 78024 to schedule a visit and see the effects of brush management programs. Forest Management The forests of Texas are as diverse as the landscape itself. Much of the historic landscape was dominated by grasslands with occasional mottes or scattered groups of trees interspersed. Aside from the pine forests of East Texas, forested areas were generally restricted to bottomlands along major rivers and creeks, or in areas protected from fire. Settlers in East Texas discovered a vast forest comprised of a variety of both pine and hardwood species. Pines, for the most part, dominated the uplands while hardwoods dominated the bottomlands. Agricultural production, commercial timber production, and other changes in land management, including virtual elimination of fire, the forests of today are very different than those present during pre-settlement times. Forest management may include establishing, maintaining, harvesting, selectively removing or suppressing trees or woody species to allow for the growth of desirable trees, shrubs, grasses, and forbs for forage and nesting or protective cover for a variety of wildlife species. Activities should focus on keeping the proper kind, amount, and distribution of woody cover for selected wildlife species as well as retaining snags for cavity nesters. Forested areas can be managed to produce wood fiber, while at the same time providing quality habitat for wildlife. Timber management strategies can be grouped into 2 categories, even-aged and uneven-aged. Even-aged management is defined as the application of a combination of management actions, which results in a timber stand comprised of trees that are the same age. Harvest methods used to generate even-aged stands are clearcut, seed-tree, and shelterwood. A clearcut results in the removal of all merchantable timber and is usually followed by site preparation and planting. Both the seed-tree and shelterwood methods rely on natural regeneration. A seed-tree operation results in the removal of all merchantable timber, with the exception of a few, well-spaced high quality trees with good seed production that will be relied upon to regenerate the stand. Approximately 8- 10 trees per acre may be retained for seed production. These seed-trees may be harvested after adequate regeneration has become established, or may be left indefinitely. The shelterwood method results in the removal of 40 to 60% of the merchantable timber. The residual trees are relied upon for seed production and seedlings become established in partial sunlight under the shelter of the residual trees. Similar to the seed-tree method, residual trees may be harvested after adequate regeneration has become established. Regardless of the method used, consideration should be given to the size, shape, and distribution of the harvest area prior to the final harvest operation. Uneven-aged management is defined as the application of a combination of management actions that maintains several age-classes and tree sizes within a timber stand. In order to produce a sustained yield of forest products, uneven-aged management results in continuous canopy coverage, recurring regeneration of desirable species, and the orderly growth and development of trees in several diameter and age- classes. Regeneration is through natural methods. Under an uneven-aged management strategy, individual trees (single-tree selection) or small groups of trees (group selection) are selectively harvested every 5-10 years. An area properly managed under single-tree selection results in a forest that is comprised of evenly distributed large, medium, and small trees of various ages. This system requires the removal of trees of all ages and sizes in order to maintain a healthy stand. To prevent degradation of the stand, the application of this harvest strategy requires the expertise of a forester experienced in uneven-aged management. Diameter cutting (cutting all trees larger than a predetermined size, rather than using tree age as criteria) or "high-grading", can result in a stand comprised of inferior trees after a few cutting cycles and should be avoided. During harvest, streamside management zones (SMZs), or a band of uncut timber, should be retained on each side of stream channels within the regeneration area. The SMZ should be a minimum width of 66 feet on each side of the channel. Along intermittent and perennial streams, widths of 100 feet or more are preferred. To provide maximum benefit to wildlife, these minimum widths should be extended to an identifiable natural break in topography (crest to crest), or to an area defined by the presence or absence of bottomland hardwoods. In addition to protecting water quality, these areas increase diversity, provide valuable mast production, and serve as wildlife travel corridors. Effective habitat management often requires the availability and proper use of an array of management "tools". Due to varying management objectives, no one tool, or in this case timber management system, is the most appropriate for every situation. Misuse of a timber management strategy can cause degradation of habitat quality. As with all land management practices, managers should develop well-defined objectives, and select and properly implement the strategy that is the most appropriate for their management needs. Note: As of January 2010 property currently appraised with a timber valuation for ad valorem tax purposes now qualify for conversion to wildlife management. Riparian Management and Improvement Riparian area refers to the low lying areas on either side of a stream course. Management or improvement of the vegetation in these areas helps to alleviate soil erosion and protect water quality. Much of our bottomland hardwood forests that existed historically have been cleared for agricultural production, degraded through improper timber harvest or other mismanagement, or flooded by the construction of flat water reservoirs. Bottomland hardwoods have been referred to as the single most important wildlife habitat type and provide a wealth of benefits for wildlife, erosion control, flood control, water quality, water retention, and ecosystem health. Managers should attempt to restore and/or manage these riparian areas that include bottomland hardwoods and natural wetlands to promote ecosystem health and diversity. Riparian management and improvements can include providing alternate livestock watering sites, deferring livestock from riparian areas during critical periods, excluding livestock from pastures with riparian areas, herbaceous plantings or seeding in degraded riparian zones, or replanting previously cleared or degraded bottomland hardwoods. Attention should specifically be given to protection of turkey roosting areas and snag retention for cavity nesters Wetland Improvements It has been estimated that Texas has lost 54% of its total wetland acreage in the last 200 years. Wetlands were at one time regarded as waste-lands and nothing more than breeding grounds for insects, pests, and disease; they were considered obstacles to progress and development and were readily converted to other land uses. It is only in the recent past that wetlands were recognized as some of the most ecologically important systems on earth. Wetlands are invaluable for their ability to prevent erosion, purify water, prevent and minimize flooding, and replenish groundwater resources. They provide humans with fossil fuels and food and wildlife with invaluable habitat. Managing, protecting, restoring, or creating wetland habitat plays an integral part in a successful wildlife program. Texas wetlands may include swamps, bottomland hardwoods, marshes, bogs, springs, playa lakes, or saline lakes. They are found along rivers, streams, lakes, and ponds; in uplands where surface water collects and at points of groundwater discharge such as springs or seeps. Wetlands are characterized by 1) water or saturated soils for at least a portion of the year 2) plants that are adapted to wet environments (hydrophytic vegetation) and 3) soils that develop under depleted oxygen conditions (hydric soils). Managing for wetland improvement can involve any practice that enhances, restores, or creates these 3 characters. Setting back succession in an existing wetland by using the axe, cow, plow, or fire to ensure the integrity of the wetland plant community can be important to the production of wetland wildlife food sources. Closing a ditch that was once used to drain an existing wetland or creating a ditch or drilling a water well to increase water flow into a wetland can be very important to maintaining the hydrology or flooding regime needed for that wetland to continue to function. Cleaning out a seep or spring which is experiencing reduced flow due to siltation can provide more permanent or seasonal water. And building a levee with water control structures to manage the water regime and provide water during the growing season and for fall and winter migrants can be an important habitat source for waterfowl or shorebirds. The management options for wetlands are as diverse as the wetlands themselves. Where the opportunity exists, wetland management provides unique opportunities for habitat management that benefits a great diversity of wildlife and overall land health. Habitat Protection for Species of Concern New and changing land use practices and the exclusion of fire and high intensity - short duration grazing by bison has had negative impacts on a number of wildlife species. Endangered, threatened, or rare wildlife species are a by product of endangered and rare habitat. Habitat protection includes managing or developing additional areas to increase nesting sites, feeding areas, and other critical habitat types to overcome limiting factors and meet the 3 basic needs of certain wildlife species. Habitat protection as it is defined here can include setting aside critical areas of habitat, managing vegetation for a particular species, maintaining overstory vegetation from degradation, and annually monitoring the species of concern. Management for migrating, wintering, or breeding Neotropical birds and should follow specific guidelines provided by the Texas Parks and Wildlife Department specific to your ecological region. Leopold wrote "...game can be restored by the creative use of the same tools which have heretofore destroyed it - ax, plow, cow, fire, and gun". Broadscale habitat management for nongame species, just as for game species, should include those practices that promote an increase in plant abundance and diversity in both composition and structure. Contact the Texas Parks and Wildlife Department for approved management guidelines before implementing activities designed to protect or enhance habitat for endangered species. For additional information see Appendix I. Prescribed Control of Native, Exotic, and Feral Species The appearance of most Texas rangelands is very different today compared to 150 or 200 years ago. The expansive grasslands, which were dotted with an occasional motte of trees, are no more. Mid- and tallgrass communities have been replaced with shortgrass communities or even pastures of exotic grasses. The expansive native grasslands were replaced by brush and woodlands which in turn influenced the type and number of wildlife species that flourish. The Texas white-tailed deer population is at an all time high and many ranges support more exotic and feral species now than ever before. The changing land management practices, combined with grazing pressure of too many deer, exotics, and livestock have degraded the quality of wildlife habitat across the state. Over-utilized rangelands have poor plant diversity, are often dominated by exotic or lesser quality vegetation, and support poor wildlife diversity. There may be little or no groundcover to capture runoff, rain water is lost, and groundwater is not recharged. The whole system is suffering. Using the gun, as a tool, to manage populations of white-tailed deer and other ungulates at or below the carrying capacity of the range is essential in providing quality wildlife habitat for a multitude of wildlife species. White-tailed deer have a high reproduction potential, and in the absence of natural predators, can quickly overpopulate a range. If white-tailed deer are allowed to overpopulate, they can have negative effects on the habitat for themselves and other wildlife species. Deer consume the most palatable plant species first. Excessive browsing pressure can eliminate these preferred plant species from the range. This reduces plant diversity and has negative impacts on all wildlife species, not just white- tailed deer. Once a range is damaged by overgrazing, it can take years for it to recover, even after deer numbers are reduced to an appropriate level. The most effective way to regulate deer numbers is through hunting. Hunting allows the land manager to maintain deer numbers at a level that the habitat can support without causing damage to the habitat. In addition to habitat damage, deer from overstocked ranges generally have poor fawn survival, low body weights, and poor antler quality. The most effective way to reduce deer numbers is through the harvest of doe deer at appropriate levels. Once deer numbers are at a desired level, doe harvest must be continued to maintain the population at a desirable level. Each time a deer hunter chooses to shoot or not to shoot a deer, a management decision that will affect the future of that deer herd and habitat is made. For example, choosing to shoot--or not to shoot a doe--affects the sex ratio and reproductive potential of the herd. Choosing to shoot--or not to shoot--a yearling buck affects the current and future age structure of the buck population. Therefore, not only can the gun be used to manipulate deer numbers, it can also be used to manipulate sex ratios, reproductive potential, and age structure of the herd. Exotic and feral species that may include feral hogs or any number of exotic ungulates compete directly with native wildlife species for available habitat. Population reduction or elimination of these non-native species will benefit your native wildlife management program (see Predator Control Activity for additional information on feral species). In addition, land managers should attempt to control or eradicate exotic vegetation that in many cases can dominate native habitats or reduce overall vegetation diversity. Native vegetation, as opposed to introduced species, provides better and more productive wildlife habitat. Removal of species such as chinaberry, Chinese tallow, weeping lovegrass, coastal bermudagrass, King Ranch bluestem, and Kleberg bluestem will reduce competition with native vegetation. Effective control of exotic vegetation is dependant on the species. The control method used should be an accepted or proven practice in the ecological region where the property is located. Wildlife Restoration Wildlife restoration has experienced numerous success stories. These efforts have resulted in stable populations of beavers, turkey, wood ducks, and white-tailed deer. Without the aid of private landowners, these successes would not have been possible. Landowners provide trapping sites for capture of the animals to be relocated, but more importantly, they mange the habitat on which these animals are dependant. Wildlife restoration means restoring or improving habitat for targeted species as part of an overall reintroduction program in a Texas Parks and Wildlife Department approved restoration area. Erosion Control Pond Construction and Repair Gully Shaping Streamside, Pond, and Wetland Revegetation Herbaceous and/or Woody plant Establishment on Critical Areas Dike/Levee Construction and Management Establishing Water Diversion Erosion Control Any active practice that attempts to reduce or keep soil erosion to a minimum for wild animals’ benefit is erosion control. Erosion is the detachment and movement of soil by moving water, wind or ice. When raindrops hit an uncovered soil surface, they dislodge and detach soil particles (splash erosion). If there is more rainfall than the ground can absorb, the resulting runoff carries these detached soil particles away. Erosion is a natural process that cannot be stopped; however, human activity such as earthmoving and tillage can accelerate the process. The erosion process advances through several stages.  Sheet erosion is the removal of a fairly uniform layer of soil from the soil surface by shallow overland flow.  Rill erosion occurs as shallow sheet flow concentrates into small channels. Flow in these channels causes further erosion and carries soil particles away.  Gully erosion is an accelerated form of rill erosion where the channels are much deeper and carry away larger quantities of soil. Raindrop impact on bare soil surface can also form a "crust" or pan on the soil surface that can be difficult for water to infiltrate. This creates more runoff and less water available to plants, which can decrease plant growth and ground cover leading to further erosion. According to the U.S. Department of Agriculture the United States loses more than 2 billion tons of topsoil each year to erosion. Erosion removes fertile soil rich in nutrients and organic matter which reduces the ability of plants to establish, grow and remain healthy in the soil. A reduction in plant growth and subsequent plant residue causes less soil cover and allows the erosion process to perpetuate and become worse. This in turn affects wildlife species dependent upon the affected plant communities. Water Quality and Conservation Erosion not only causes loss of soil productivity but also creates water quality problems once the sediment leaves the site and enters surface waters. The EPA has declared that sediment contamination of our surface waterways is one of the biggest threats to our nation's water resources. When eroded sediment is transported from its site of origin to nearby water bodies, it can also carry fertilizers, pesticides and other contaminants attached to the soil particles. Water that is loaded with sediments can lead to reduced drainage capacity, increased flooding, decreased aquatic organism populations, decreased commercial and recreational fishing catches, clogged and damaged commercial and industrial irrigation systems, increased expenditures at water treatment plants to clean the water, and decreased recreational and aesthetic value of water resources. Some erosion control practices include: Pond construction is building a permanent water pond to prevent, stop or control erosion as an approved Natural Resource Conservation Service (NRCS) watershed project while providing habitat diversity and benefiting wildlife. Whenever possible, owners should use ponds to help create or restore shallow water areas as wetlands and for water management. Gully shaping involves reducing erosion rates on severely eroded areas by smoothing to acceptable grades and re-establishing vegetation. An area should be seeded with plant species that provide food and/or cover for wildlife. Streamside, pond and wetland revegetation means revegetating areas along creeks, streams, ponds and wetlands to reduce erosion and sedimentation, stabilize streambanks, improve plant diversity and improve the wildlife value of sensitive areas. Establishing native plants on critical areas is one method of controlling erosion. These plants also can provide food and/or cover for wildlife and restore native habitat. Some of the ways to establish these plants are listed below.  Establish and manage wind breaks/shelterbelts by planting multi-row shelterbelts (at least four rows that are 120 feet wide by 1/4 mile), renovate old shelterbelts (re- fence, root-prune and replace dead trees) and establish shrub mottes.  Establish perennial vegetation on circle irrigation corners by revegetating at least every other corner to reduce erosion and sedimentation, improve plant diversity and improve wildlife habitat.  Plant permanent vegetation on terraces and field borders to reduce erosion, improve plant diversity and improve wildlife habitat.  Conserve tillage/no-till farming practices by leaving waste grain and stubble on the soil surface until the next planting season to provide supplemental food or cover for wildlife, control erosion and improve the soil tilth.  Manage Conservation Reserve Program (CRP) cover by maintaining perennial cover established under the CRP on erodible sites using proper management techniques such as haying, prescribed grazing or burning. Dike, levee construction or management is a way to establish and maintain wetlands or slow runoff to control or prevent erosion and to provide habitat for wetland-dependent wildlife. Levee management may include reshaping or repairing damage caused by erosion and revegetating levee areas to reduce erosion and sedimentation and stabilize levees. This practice may include fencing to control and manage grazing use. Water diversion systems also can be installed to protect erodible soils and divert water into wetlands to provide habitat for resident and migratory water birds and wetland- dependent species. Minimizing Erosion Building and construction projects can be major causes of erosion. Landowners can take steps to minimize erosion during these projects by following a few simple, commonsense precautions.  Plan construction activities during the spring and summer months so that erosion control measures can be in place when rain comes.  Examine your site carefully before building. Be aware of the slope, drainage patterns and soil types. Proper site design will help you avoid expensive stabilization work.  Preserve existing vegetation as much as possible. Limit grading and plant removal to the areas under current construction. (Vegetation will naturally curb erosion, improve the appearance and the value of your property, and reduce the cost of landscaping later.)  Use fencing to protect plants from fill material and traffic. If you have to pave near trees, do so with permeable asphalt or porous paving blocks.  Preserve the natural contours of the land and disturb the earth as little as possible. Limit the time in which graded areas are exposed.  Minimize the length and steepness of slopes by benching, terracing, or constructing diversion structures. Landscape benched areas to stabilize the slope and improve its appearance.  As soon as possible after grading a site, plant vegetation on all areas that are not to be paved or otherwise covered.  Control dust on graded areas by sprinkling with water, restricting traffic to certain routes, and paving or gravelingaccess roads and driveways. Temporary Measures to Stabilize the Soil Grass provides the cheapest and most effective short-term erosion control. It grows quickly and covers the ground completely. To find the bet seed mixtures and plants for your area, check with your local nursery, the Texas Department of Agriculture, the Natural Resource Conservation Service, the Texas Cooperative Extension Service and Texas Parks and Wildlife Department. Mulches hold soil moisture and provide ground protection from rain damage. They also provide a favorable environment for starting and growing plants. Easy-to-obtain mulches are grass clippings, leaves, sawdust, bark chips and straw. Straw mulch is nearly 100% effective when held in place by spraying with an organic glue or wood fiber (tackifiers), by punching it into the soil with a shovel or roller, or by tacking netting over it. Commercial applications of wood fibers combined with various seeds and fertilizers (hydraulic mulching) are effective in stabilizing sloped areas. Hydraulic mulching with a tackifier should be done in two separate applications: the first composed of seed fertilizer and half the mulch, the second composed of the remaining mulch and tackifier. Commercial hydraulic mulch applicators - who also provider other erosion control services - are listed under "landscaping" in the phone book. Mats of excelsior, jute netting and plastic sheets can be effective temporary covers, but they must be in contact with the soil and fastened securely to work effectively. Roof drainage (Rainwater Harvesting) – Rainwater can be collected in barrels or storage containers or routed into lawns, planter boxes and gardens. It can also be diverted to a watering facility to provide an additional source of water for wildlife use. Be sure to cover stored water so you don't collect mosquitoes. Excessive runoff should be directed away from your house and into wildlife watering facilities. Too much water can damage trees and make foundations unstable. Structural Runoff Controls Even with proper timing and planting, you may need to protect disturbed areas from rainfall until the plants have time to establish themselves. Or you may need permanent ways to transport water across your property so that it doesn't cause erosion. To keep water from carrying soil from your site and dumping it into nearby lots, streets, streams and channels, you need ways to reduce its volume and speed. Some examples of what you might use are:  Riprap (rock lining) to protect channel banks from erosive water flow.  Sediment trap to stop runoff carrying sediment and trap the sediment.  Storm drain outlet protection to reduce the speed of water flowing from a pipe onto open ground or into a natural channel.  Diversion dike or perimeter dike to divert excess water to places where it can be disposed of properly.  Straw bale dike to stop and detain sediment from small unprotected areas (a short term measure).  Perimeter swale to divert runoff from a disturbed are or to contain runoff within a disturbed area.  Grade stabilization structure to carry concentrated runoff down a slope Using Livestock to Repair the Effects of Erosion Just as overgrazing can cause erosion, erosion can also be caused by under- utilization by livestock and permanent deferral. Lack of grazing can cause an algal cap to develop on the surface of the soil that with time becomes impenetrable to water. A proper stocking rate keeps the soil turned over, prevents compaction, and allows rainfall to infiltrate the soil preventing run off, and reducing erosion potential. For information on which plants provide the best erosion control and wildlife benefit, consult the Texas Plant Information Database at http://tpid.tpwd.state.tx.us/index.asp. Algal capping on the soil causes a nearly impenetrable barrier to rainfall, increasing the potential for erosion. Proper grazing helps prevent capping from occurring. Predator Control Imported Red Fire Ants Brown-headed Cowbirds Grackle, Starling, and House Sparrow Control Coyotes Feral Hogs Raccoons, Skunks, Feral Cats and Dogs PREDATOR CONTROL There is no disputing the fact that predators including reptiles, birds, and mammals impact native wildlife populations. Whether that impact is negative or harmful is debated by farmers, ranchers, wildlife professionals and the general public. Natural systems including predator – prey relationships are complex and evaluating predator impacts on native species may be difficult to say the least. Livestock injury and/or loss by predators are measurable with economic consequences and are rarely tolerated by ranchers and managers. Loss of native wildlife species may not be realized when compared to livestock losses but may have an economic impact on ranchers with possible lower lease returns and loss of individual trophy animals. Landowners, livestock and wildlife managers should recognize that the goal of predator control should be to protect livestock and minimize losses of native wildlife due to predation, not necessarily maximizing the take of predators. Landowners and managers must evaluate the need for predator control on their property by assessing the abundance and diversity of predators present, the potential impacts by those predators on desired wildlife species and livestock, and the long-term habitat management goals of the property. For example, removing large predators from high deer density areas will only increase deer populations impacting plant diversity and cover, thus affecting the wildlife species dependant on those plants for food, shelter, and nesting cover. It may be difficult for landowners new to an area or those not familiar with the needs of wildlife to evaluate the impacts of predators on the resident and migratory species on their property. The mere presence of some predatory species should prompt an immediate response from the landowner or manager. Feral cats, dogs, and hogs should be removed by whatever means from wildlife habitat and should not be tolerated by owners and managers. Imported red fire ants are another example of a species that should be controlled by every means available. The Brown-headed Cowbird, a parasitic nester that impacts more than 225 species of birds, should be controlled by trapping when possible and only after attending a certification course provided by Texas Parks and Wildlife Department at various times of the year. Native predator species such as raccoons, ringtails, opossums, skunks, fox, and rat snakes can have localized impacts on resident bird populations especially ground nesting species such as turkey, quail, and a number of songbirds. Control of predators such as these may not need to be a top priority if habitat conditions are where they should be, offering abundant ground and understory cover for shelter, food and nesting. Coyotes, bobcats, and mountain lions once considered predators of the “wilderness” are now found in close proximity to suburban areas as urban “sprawl” or expansion encroaches on rural farm and ranch lands. As property is developed into this habitat, interaction with these highly adaptable and mobile species is occurring more frequently. A common sense approach should be taken when considering control of these species. The landowner or manager must evaluate the predicted outcome of control measures prior to starting any control. For example, in many parts of the Edwards Plateau, as well as the State and nationwide, there are too many white-tailed deer and controlling the predators that feed on them would cause increased populations and further loss of habitat for other wildlife species. Some precautions can be taken when large predators are present in an area close to people. Pets and newborn livestock should be protected by any means available i.e. fencing, enclosures, housing, etc… Keep pet foods from the outdoors and restrict wildlife feeding to a safe and comfortable distance from the house. Control of prey species numbers in the form of deer harvest to at or below carrying capacity may discourage any large predators from becoming residents in the area. If control measures are warranted, consult with a wildlife professional prior to using any measures other than shooting or trapping. Extreme caution should be taken and only the experienced should consider methods such as poisoning. Some species may not be recognized as predators but cause damage and loss of wildlife by actions other than direct take. For example, European Starlings and English sparrows displace native cavity nesting birds such as eastern bluebirds, woodpeckers and purple martins, by taking over and actively defending nest cavities. The presence of large grackle and blackbird colonies deter other birds from nesting in some areas. Brown-headed and Bronzed Cowbirds have tremendous impacts on songbird populations across the nation. A single female cowbird can lay up to 40 eggs per season, impacting literally hundreds of songbird species including a number of threatened and endangered species in the Edwards Plateau and Cross Timbers and Prairies. Trapping and shooting are the most economic means of control with caution taken to release non-target species from traps and proper identification made prior to shooting. A landowner or manager should first manage the wildlife habitat on his or her property, increasing the plant diversity and abundance of species that provide food, shelter, and nesting cover for all wildlife species prior to implementing a full scale predator control program for all predator species. For the majority of landowners that feel predator control would be useful in meeting the criteria for H.B. 1358, the bill implemented to allow agricultural appraisal for land used to manage wildlife, a few basic practices will work. The size and location of the property, amount of wildlife habitat and the goals of the landowner will influence the practices used. Fire ant control and cowbird trapping is not dependant on the criteria above. As well as live trapping of small and medium-sized mammals such as raccoons, opossums, rats, skunks, and others. The control of sparrows, starlings, grackles and feral animals can and should occur on any size property. On larger tracts of land, control of large predators may benefit wildlife present but should be carried out by knowledgeable land managers and/or wildlife professionals when methods other than shooting or live trapping are utilized. On properties throughout the Edwards Plateau, Cross Timbers & Prairies and across the State, landowners and managers have implemented every known control method for predators and yet they thrive. Landowners need to have a long range wildlife management plan in place defining the goals of any of the activities occurring on the property including predator control. Once in place, activities can be monitored and results can be recorded to aid in future management decision making. Providing Supplemental Water Marsh and Wetland Restoration or Development Well, Troughs, Windmill Overflows, and Other Watering Facilities Spring Development and/or Enhancement Providing Supplemental Water Natural water exists in all wildlife environments. Supplemental water is provided when the owner actively provides water in addition to the natural sources. This category of wildlife management activity includes providing supplemental water in habitats where water is limited or redesigning water sources to increase its availability to wildlife. Many people mistakenly believe that water sources suitable for livestock are also suitable for wildlife. Unfortunately that is not always the case, particularly for young wildlife and many bird species. Wildlife water developments are in addition to those sources already available to livestock and may require protection from livestock. Marsh or wetland restoration or development can provide supplemental water in the form of shallow wetlands for wetland-dependent wildlife, even in areas where inadequate water does not limit wildlife. Owners may include seasonally available water such as:  greentree reservoirs;  specific shallow roost pond development;  seasonally flooded crops and other areas;  moist soil management;  cienega (desert marsh) restoration, development and protection; and  maintaining water in playa lakes. Based on the wildlife’s needs and the suitability of the property, managing water levels annually is desirable. Managing well, trough and windmill overflow can provide supplemental water for wildlife and provide habitat for wetland plants. Owners also may drill wells if necessary and/or build pipelines to distribute water. Building devices—known as wildlife water guzzlers—to collect rainfall and/or runoff for wildlife in areas where water is limited also helps protect wildlife, but these devices must be a part of an overall habitat management program. Spring development and/or improvements can be designed to protect the immediate area surrounding a spring. Excluding and/or controlling livestock around springs may help to maintain native plants and animal diversity. Other ways to protect areas include moving water through a pipe to a low trough or a shallow wildlife water overflow to make water available to livestock and wildlife while preventing degradation of the spring area from trampling. Improvements also could include restoring a degraded spring by selectively removing appropriate brush and revegetating the area with plants and maintaining the restored spring as a source of wildlife water. Maintaining critical habitat, nesting and roosting areas for wildlife and preventing soil erosion must be considered when planning and implementing brush removal. This practice should be planned and implemented gradually and selectively over a period of time. Providing Supplemental Food Grazing Management Food Plots Feeders and Mineral Supplementation Managing Tame Pasture, Old Fields and Croplands Transition Management of Tame Grass Monocultures Providing Supplemental Food Most wildlife environments have some natural food. An owner supplies supplemental food by providing food or nutrition in addition to the level naturally produced on the land. Food plots are one way to establish locally adapted forage to provide supplemental foods and cover during critical periods of the year. Livestock should be generally excluded from small food plots. The shape, size, location and percentage of total land area devoted to food plots should be based on the requirements of the targeted species. Feeders and mineral supplements also can help dispense additional food to selected wildlife species during critical periods. These can be as simple as properly placed bird feeders, or more elaborate types of turkey feeders. Once a feeding program has been initiated, it is important to keep it implemented and insure all feeders are kept full. It is also important to clean all feeders regularly to avoid contamination from aflatoxin. Harmful aflatoxin in feed should not exceed 20 parts per billion. Feeders for deer should not be used except to control excessive numbers of deer and/or exotic ungulates as defined within a comprehensive wildlife management plan with a targeted harvest quota that is regularly measured. Mineral supplements also may be supplied to wildlife in several ways, however, this practice must be a part of an overall habitat management plan that addresses all animal groups and considers the habitat’s carrying capacity. Managing tame pasture, old fields and croplands can increase plant diversity, provide supplemental food and forage and gradually help convert the land to native vegetation. Recommended practices may include:  overseeding or planting cool season and/or warm season legumes (for example, winter wheat, clovers, vetches and peas) and/or small grains in pastures or rangeland;  using plants and planting methods appropriate to the county;  shallow tillage (discing) that encourages habitat diversity, the production of native grasses and forbs or increases bare ground feeding habitat for selected species; and  no till or minimum till agricultural practices that leave waste grain and stubble on the soil surface until the next planting season—which provide supplemental food or cover, control erosion and improve soil tilth. Legumes should be planted annually until all pastures are shifted to native vegetation. Providing Supplemental Shelter Nest Boxes Brush Piles and Slash Retention Fence-line Management Hay Meadow, Pasture, and Cropland Management for Wildlife Providing Supplemental Shelter Cover or shelter is an important part of wildlife habitat. In fact, it is an integral part along side food and water and its availability on the landscape will often determine the population of wildlife species in a given area. Wildlife cover can take many forms and can vary greatly from one species of wildlife to another. Some species of wildlife are very specific in their need for cover while other are quite opportunistic and can readily adapt to what’s available. However, one thing is common when it comes to cover; all wildlife species require it. Although supplemental shelter can be provided in many ways, it will never take the place of good conservation and management of native habitats. When land is properly managed for wildlife habitat, quality cover and shelter will usually be available. Unfortunately in much of Texas, many areas have been so altered, neglected, and abused that one of more of the key requirements of wildlife (including shelter) is absent or in short supply. This is where the opportunity exists for developing additional shelter for wildlife. Before beginning on any wildlife management practice, you must determine what wildlife species you are managing for and what its specific cover needs are. Some need cover on a large scale while others may need a relatively small amount. Some live and reproduce exclusively on the ground while others spend most of their lives in the air or in trees. Management should be targeted to those populations of wildlife in your area and their specific cover needs. Cover and shelter can be provided for wildlife in many ways. Some species of birds and mammals nest and reproduce in cavities. Nest boxes and snags (dead, standing trees) can be constructed and installed for these wildlife species. Brush piles can also be created to provide cover for many species of birds, reptiles, and small mammals. Some properties may lack sufficient cover on a larger scale for wildlife species such as white- tailed deer. Trees and shrubs can be planted to provide this cover requirement although this practice may not be cost-effective. Mowing can be deferred in certain areas to allow grasses and weeds (forbs) to mature and provide food, cover and nesting sites for some species of wildlife. Trees, shrubs, and vines along fence lines can be allowed or encouraged to grow up in in areas where cover is limited. Mesquite or other brush can be half-cut early in the growing season on provide low growing, ground cover in areas where this is lacking. Census Spotlight Counts Standardized Incidental Observations Stand Counts of Deer Aerial Counts Track Counts Daylight Deer Herd and Wildlife Composition Counts Harvest data Collection and Record Keeping Browse Utilization Surveys Census of Endangered, Threatened, or Protected Species Census and Monitoring of Nongame Wildlife Species Miscellaneous Counts Census Census counts are periodic surveys and inventories used to determine the number, composition or other relevant information about a wildlife population. They may be used to determine if the current wildlife management practices are producing or sustaining the targeted species. Such surveys also help evaluate the management plan’s goals and practices. Specifically, this activity estimates species numbers, annual population trends, density or age structure using accepted survey techniques. Annual results should be recorded as evidence of completing this practice. (Refer to Appendices L and M for more comprehensive information on conducting census.) Spotlight counting animals at night along a predetermined route using a spotlight should follow accepted methodology with a minimum of three counts conducted annually. (Spotlight surveys are not a reliable method for determining white-tailed deer densities on small acreages.) Aerial counts using a fixed-wing aircraft or helicopter to count animals also should follow accepted methodology for the region and be performed by a trained individual. Daylight wildlife composition counts are driving counts used to census wildlife in daylight hours. Annual population trends on dove, quail, turkey and deer, as well as sex/age structure on deer; should be determined by sightings along a standardized transect of a minimum of five miles at least three times during a season. Harvest data collection/record keeping means tracking annual production of wildlife. Age, weight and antler development from harvested deer, and the age and sex information from game birds and waterfowl should be obtained annually. Browse utilization surveys annually examine deer browse plant species for evidence of deer use on each major vegetative site on the property. The surveys should be conducted in a way that can be repeated. Census and monitoring of endangered, threatened or protected wildlife through periodic counts can improve management and increase knowledge of the local, regional or state status of the species. Census and monitoring of nongame wildlife species also can improve management or increase knowledge of the local, regional or state status of the species. These practices can include developing checklists of wildlife diversity on the property and should be a part of a comprehensive wildlife management plan. One of the most important things for a landowner to remember when designing a census protocol for nongame species on their property is the ability to be consistent. In other words, be able to do the same thing in the same way at the same time each and every time the census is conducted. APPENDICES STANDARD WILDLIFE HABITAT AND POPULATION MANAGEMENT RECOMMENDATIONS For the EDWARDS PLATEAU and CROSS TIMBERS & PRAIRIES ECOLOGICAL REGIONS Appendix A General Habitat Management Considerations, Recommendations, and Intensity Levels Fundamental requirements that must be considered when managing wildlife habitat include food, cover, water and the proper distribution of these elements. Wildlife and habitat management should be directed at maintaining a productive and healthy ecosystem. The ecosystem consists of the plant and animal communities found in an area along with soil, air, water and sunlight. All management activities should be aimed at conserving, managing, and improving the quantity and quality of soils, water and vegetation. Managing for plant diversity is essential. A diverse habitat has a good mixture of various species of grasses, forbs (weeds), and browse (woody) plants. Many of these plants will be at various stages of growth, which adds another element of diversity. The diversity of vegetation increases the availability of food and cover for wildlife species. A greater diversity of range plants results in more food being made available during different periods of the year. The volume and diversity of plants protects the soil from erosion. The decomposition of vegetation also helps restore needed minerals to the soil to sustain plant life. Vegetation improves the water cycle by increasing water infiltration into the soil and reducing surface runoff. An ecologically based habitat management program serves to improve water cycling, mineral cycling, and energy flow and manipulate plant succession. These processes enhance vegetative quantity, quality and diversity. A greater diversity of all life forms, including microorganisms, insects, reptiles, amphibians, birds and mammals may be achieved under sound management. The land’s long term health is improved and conserved for future generations to be used as a source of income, recreation and for aesthetic enjoyment. Plant communities with a diversity of grasses and native broad-leaved weeds (called forbs) are more productive than those comprised primarily of grasses. The climax plant community of most rangelands is comprised primarily of perennial grasses with a relatively low forb component. While this may be suitable for livestock and some grassland wildlife, most species are dependent on the seeds and foliage of forbs. Periodic disturbances such as fire, soil disturbance, livestock grazing, and mowing can set back plant succession and maintain a diverse plant community, simulating conditions under which plants and animals evolved within ecosystems in Texas. Below is an example of a planning format that many landowners in the Edwards Plateau and Cross Timbers and Prairies Ecological Regions may find applicable to their property, depending on their particular goals and objectives. This is presented to help landowners develop a Wildlife and Habitat Management Plan. To meet the requirements of the wildlife management tax valuation, a landowner must annually implement and complete at least one management ACTIVITIES from at least three of the seven wildlife management PRACTICES (i.e. Habitat Control, Erosion Control, Predator Control, Providing Supplemental Supplies of Water, Providing Supplemental Supplies of Food, Providing Shelter, and Making Census Counts to Determine Population). Again, a complete plan will likely include more than three activities and may include several practices under each activity. It is important for the landowner to be able to document the wildlife management activities that have taken place during the tax year. Receipts, photographs, and maps are some of the types of documentation a landowner might want to consider using for this purpose. If requested to do so by the county tax appraisal district, the landowner may have to file an annual report, including documentation, on management activities undertaken during the year. The required fill-in-the-blank report form is attached in Appendix U. Wildlife and Habitat Management Plan - General Information Tract Name: ___________________ County: ____________________ Owner: _______________________ Manager: ___________________ Address: ______________________ Address: ____________________ Address: ______________________ Address: ____________________ Phone: ________________________ Phone: ______________________ Phone: ________________________ Phone: ______________________ Individual Preparing the Plan: ______________________________ Date: _______________________ Is property leased for hunting? Yes No Consultation is with: Owner Lessee Manager Location of Property: Distance and direction from nearest town Is acreage under high fence? Yes No Acreage: Cropland: Non-native Pasture: Native Grass Pasture: Upland Woods: Bottomland Woods: Wetlands(optional): Ponds/Lakes: Other(specify): Total Acres: ___________ Current Habitat Description: Describe vegetation association or type (eg., Live oak-Juniper, Post oak-Blackjack oak, Mesquite-Lotebush, Grassland Savannah). State dominant plants occurring and/or crops grown on the property. The description can include the soil types and vegetation associated with the various soil types. Describe livestock and wildlife water sources (eg., permanent or seasonal streams, springs, stock tanks, water troughs) that are present. Documentation may include any SCS (now NRCS), TPWD, or other plan, map or aerial photo that may exist for the tract to identify soils, vegetation and water sources. The plant list should include browse plants utilized by deer, if deer management is a goal (see appendix F). Also, state the degree of use on key browse plants utilized by livestock and deer. ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ Past History of Land Use and Wildlife: Describe past land use practices that have been implemented such as prescribed burns, range or pasture reseeding, brush management, etc. Describe past history of cropping, livestock, and wildlife management (census, harvest, etc.). Present other information such as the presence of unique cover types, turkey roosts, or etc. Also indicate presence of feral hogs or other exotics that compete with native wildlife. ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ Goals and Objectives: A discussion and outline of landowner (also family if desired) goals and objectives for the property is necessary to define direction and to realistically assess the set of activities and practices that should be incorporated to integrate wildlife and habitat enhancement. (Select one or more to guide the wildlife and habitat planning process) 1. Improve habitat for native game species (as designated in the Texas Hunting Guide.) 2. Improve habitat for native nongame species (those species not listed as game species, e.g., songbirds). 3. Manage for habitat and wildlife diversity. 4. Restore, maintain or improve native habitats for wildlife diversity. 5. Generate revenue from native wildlife resources. 6. Improve habitat for rare native species. 7. Protect sensitive habitats or critical species. 8.____________________________________________________________________ 9.____________________________________________________________________ 10.___________________________________________________________________ 11.___________________________________________________________________ 12.___________________________________________________________________ Management Practices Normally Beneficial for Representative Wildlife in the Edwards Plateau and Cross Timbers Ecoregions White-tailed Deer Fox Squirrel Cottontail Rabbit Wild Turkey Bobwhite Quail Mourning Dove Wood Duck Red-Tailed Hawk Eastern Bluebird Mexican Free- tail Bat Black-capped Vireo Golden-cheeked Warbler A. HABITAT CONTROL Grazing Management X X X X X X X X X X X X Prescribed Burning X X X X X X X X X Range Enhancement (Reseeding) X X X X X X X X Brush Management X X X X X X X X X X Riparian Management / Enhancement X X X X X X X X X X X X Wetland Enhancement X X X X Habitat Protection-Species of Concern X X Prescribed Control-Native,Exotic,Feral Species X X X X X X X X X Wildlife Restoration X X B. EROSION CONTROL Pond Construction X X X X X Gully Shaping Streamside, Pond, Wetland Regeneration X X X X X X Herbaceous &/or Woody Plant Establishment X X X X X X X X X X Dike / Levee Construction / Management X Establish Water Diversion C. PREDATOR CONTROL Predator Management X X X X X X X X Imported Red Fire Ant Control X X X X X X Cowbird Control X X X Grackle / Starling / House Sparrow Control X X X X D. PROVIDING SUPPLEMENTAL WATER Marsh / Wetland Restoration X X Wells/Troughs/Windmill Overflow X X X X X X X X X Spring Development &/or Enhancement X X X X X X E. PROVIDING SUPPLEMENTAL FOOD Grazing Management X X X X X X X X X X X X Prescribed Burning X X X X X X X X X Range Enhancement X X X X X X X X Food Plots X X X X X Feeders & Mineral Supplementation X X X X Managing Tame Pasture, Old Fields, Croplands X X X X X X X Transition Mgt. of Tame Grass Monocultures X X X X X X X F. PROVIDING SUPPLEMENTAL SHELTER Nest Boxes, Bat Boxes X X X X Brush Piles & Slash Retention X X X X X Fence Line Management X X X X X X X Hay Meadow, Pasture, & Cropland Management X X X X X X X Half Cutting Trees & Shrubs X X X Woody Plant / Shrub Establishment X X X X X X X Natural Cavity / Snag Development X X X X X G. CENSUS Spotlight Counts X Aerial Counts X Daylight Deer Herd / Wildlife Composition Counts X Harvest Data / Record Keeping X X X X X X X Browse Utilization Survey X Census & Monitoring of Endangered, Threatened, or X X Census & Monitoring of Nongame Species X X X Miscellaneous Counts X X X X X X Specific Habitat Management Practices, By Activity HABITAT CONTROL GRAZING MANAGEMENT (Refer to Appendix D - Livestock Recommendations, for information to help prepare a specific grazing proposal for the plan.) Good grazing management that includes deferment and rest for pastures enhances vegetative quantity, quality, and diversity. Grazing management, which may include deferment, is the planned manipulation of livestock numbers and grazing intensities to increase food, cover, or improve structure in the habitat of selected species. Grazing management includes: 1) kind and class of livestock grazed, 2) determination and adjustment of stocking rates, 3) implementation of a grazing system that provides planned periodic rest for pastures by controlling grazing intensity and duration, and/or 4) excluding livestock from sensitive areas to prevent trampling, allow for vegetative recovery, or eliminate competition for food and cover. Planned deferments can be short or long term up to 2 years. Extended rest from grazing (two years or more, if necessary) may be required on some ranges. Seasonal stocker operations may be appropriate to manipulate habitat. Supplemental livestock water (earthen tanks, troughs, wells, piping) to facilitate deferred-rotation grazing of livestock and disperse grazing pressure may be incorporated into planning to improve wildlife habitat. Similarly, it is important to plan and design fence construction to facilitate deferred- rotation grazing of livestock. Fencing can also be used to enhance or protect sensitive areas, woodlands, wetlands, riparian areas and spring sites as designated in plan. Activities should be reviewed annually. Grazining management systems might include:  1 Herd / 3 Pasture (preferably as a step in moving toward a 1 herd / multiple pasture {4+} grazing system)  1 Herd / 4 Pasture  1 Herd / multiple pasture multiple herd / multiple pasture (goal is to move toward always resting 75% of area)  High intensity/low frequency (HILF)  Short duration system  Other type of grazing system (ex. a short-term stocker system):  Planned Deferment (e.g., number of years livestock will be deferred from the property, etc.): PRESCRIBED BURNING (Refer to Appendix E - Vegetation Management Recommendations, for information to help prepare a specific burning proposal for the plan.) Prescribed burning is the planned application of fire to enhance habitat and plant diversity, control invasive woody species, increase food, manipulate cover, or improve structure in the habitat of selected species. Plans should indicate a minimum percent of acreage and general burning cycle (eg., minimum of 15 percent of acreage burned over 7 years in the Edwards Plateau or Cross Timbers and Prairies). A written burning plan as an addendum to the Wildlife and Habitat Management Plan (burn plans and prescribed burning should only be attempted with aid of professionals). The plan should include a map that shows the areas to be burned and the planned dates (month and year) that each area will be burned during the burning cycle. It should also designate areas to be protected from burning, and should incorporate flexibility during periods/years when conditions are not favorable. Specific areas (e.g., sensitive sites) to be protected from burning should be briefly described and shown on a map. Using a drip torch to create a prescribed fire is an excellent management practice that simulates the natural cycles that these ecosystems evolved under, and enhances habitats and plant diversity. RANGE ENHANCEMENT (Range Reseeding) Establish native herbaceous plants (grasses and forbs) that provide food and cover for wildlife or erosion control benefits. Plant species selected and methods for establishment should be applicable to the ecological region (non-native species are generally not recommended, but if required for a specific purpose, non-native species should not exceed 25 percent of the seeding mix). If non-native species must be used to achieve a specific goal, species used must not be invasive or aggressive. Seeding mixtures providing maximum native plant diversity are recommended. Many herbaceous broadleaf plants (known as forbs - weeds and wildflowers) are beneficial to wildlife for forage and/or seed production. Encourage "weed and wildflower" species by selective application of chemical, biological (eg., grazing management) and/or mechanical means on native rangelands, Conservation Reserve Program lands, and tame grass pastures (eg., coastal bermuda). Some periodic weed control may be needed in fields converted to native rangeland to assist in the establishment of desirable vegetation. This practice must be a part of an overall habitat management plan and designed to reestablish native habitats within a specified time frame. Range Enhancement should annually affect a minimum of 10% of the total area designated in the plan, or a minimum of 10 acres annually, whichever is smaller, until the project is completed. BRUSH MANAGEMENT (Refer to Appendix E - Vegetation Management Recommendations, for information to help prepare a specific brush management proposal for the plan.) Brush management may be the removal or establishment of woody plants. It can be the selective removal or suppression of target woody species, including exotics, to allow the increased production of desirable trees, shrubs, grasses, and forbs for forage, nesting, or protective cover for selected species. Brush Management practices should annually affect a minimum of 10% of the total area designated in the plan, or a minimum of 10 acres annually, whichever is smaller. This practice includes retaining the proper kind, amount, and distribution of woody cover for selected species. Brush management planning must consider wildlife cover requirements, soil types, slope angle and direction, soil loss and erosion factors, and subsequent planning to control re-invasion. This practice also includes retention of snags to provide cover and nesting sites for cavity nesting animals. When used, herbicides should be applied in strict accordance with label directions. See Appendix Y. This practice can include the planting of native tree and shrub species to provide food, corridors and/or shelter using species and methods as described in appendices. RIPARIAN MANAGEMENT AND ENHANCEMENT Annually and seasonally protect the vegetation and soils in riparian areas (low areas on either side of stream courses) from mismanagement, such as that caused by excessive, long-term livestock trampling. Riparian management and enhancement can include providing livestock with alternate watering sites, deferring livestock grazing in pastures with riparian areas during critical periods of the year, total exclusion of livestock from pastures with riparian areas, and fencing riparian areas to exclude or provide short duration grazing by livestock. Establish trees, shrubs, or herbaceous vegetation along streams or water courses to provide food, cover, and travel corridors, and to reduce erosion. Corridors should be at least 100 yards wide. Refer to “Agroforestry Notes - A Riparian Buffer Design for Cropland” (AF Notes-5, January 1997) by the U.S. Forest Service that gives details for establishing a 50 ft. wide strip of grass, shrubs, and trees between a stream and cropland. Restore important forested habitats including bottomland hardwoods and turkey roost sites. A minimum of one Riparian Management and Enhancement project must be implemented and maintained every 10 years to qualify. See Appendix E. Proposed riparian management and enhancement projects might include: o Fencing  complete fencing of riparian areas  partial fencing of riparian areas o Deferment from livestock grazing  complete deferment  partial deferment. o Establish vegetation  trees  shrubs  herbaceous  both sides of stream  one side only WETLAND ENHANCEMENT Annually provide seasonal or permanent water for roosting, feeding, or nesting habitat for wetland wildlife. This practice involves shallow wetland management (creation or Over 50% of Texas' wetlands have disappeared. Wetland management, restoration or creation is extremely important for wetland dependent wildlife restoration), greentree reservoir creation or management, and other moist soil management such as rotational grazing or exclusion (fencing out) of livestock from wetlands, especially during the growing season. This practice should be a part of an overall habitat management plan. Annual management as described in management plan, such as water level manipulation qualifies. Construction and maintenance of a new project will qualify for 10 years. HABITAT PROTECTION FOR SPECIES OF CONCERN Planned protection and management of land or a portion of land to provide habitat for an endangered, threatened or rare species, such as fencing off critical areas, managing vegetation structure and diversity within species parameters, establishing and maintaining firebreaks to protect critical overstory vegetation, and annually monitoring the species of concern. This practice includes the management/protection of nesting sites, feeding areas, and other critical habitat limiting factors, and the development of additional areas. The broad-scale management of habitat for migrating/wintering/ breeding Neotropical birds (primarily songbirds) should follow guidelines in appendix for zones of importance (See Appendix J). Refer to Appendix I for guidelines on the management of the habitats for the endangered golden-cheeked warbler and black-capped vireo which occur in portions of the Edwards Plateau and Cross Timbers and Prairies Ecological Regions. A minimum of one project must be implemented every 10 years to qualify. Proposed projects for habitat protection for species of concerns might include: o Planned protection/management projects: o fencing o firebreaks o prescribed burning o habitat manipulation (e.g. thinning, etc.) o control of nest parasites o native/exotic ungulate control o other__________ PRESCRIBED CONTROL OF NATIVE, EXOTIC AND FERAL SPECIES Use legal means to control the number of grazing and browsing animals. Maintain the population density of native wildlife (particularly white-tailed deer — see Appendix F) at the carrying capacity of the habitat to prevent overuse of desirable plant species and enhance habitat for native wildlife species. Populations of exotics, feral animals, and wildlife should be strictly controlled to minimize negative impact on native wildlife and habitat. This should incorporate harvest and vegetative monitoring over time to assess control intensity and impact on habitat to meet plan objectives. Feral hogs compete directly with native wildlife, and very destructive of habitats. Remove or control exotic vegetation impacting native habitats and wildlife populations (eg., large stands of naturalized salt cedar, etc.). Convert tame pasture grasses (such as large areas of coastal bermuda, klinegrass, old world bluestems) to native vegetation. The removal or control of exotic vegetation or the conversion of tame grass pastures must affect a minimum of 10% of the area designated in the plan, or 10 acres annually, whichever is smaller. WILDLIFE RESTORATION Restoration or enhancement of habitat to good condition for target species, and reintroduction and population management of TPWD approved native species within the carrying capacity of the habitat as part of an approved restoration area at a scale capable of supporting a sustainable population (e.g., eastern turkey). EROSION CONTROL POND CONSTRUCTION AND MAJOR REPAIR Construction or major repair of a permanent water pond for the purpose of preventing, stopping, or controlling erosion as part of an approved NRCS erosion control structure. The project must provide habitat diversity and wildlife benefits. Creation/restoration of shallow water areas as primary production wetlands and associated water level control and management should be associated with ponds at every opportunity. A minimum of one project must be implemented and maintained every 10 years to qualify. GULLY SHAPING Reducing erosion rates on severely eroded areas by smoothing with top soil to acceptable grades and reestablishing vegetation, primarily native vegetation, with sensitivity to existing wildlife cover and woody vegetation that provides travel corridors. Area must be interseeded with species that provide food and/or cover for wildlife to be applicable (see range enhancement guidelines). This practice may include the feeding of large numbers of cattle on gully sites to contour the eroded areas by way of hoof action to aid in the recovery of the site. A minimum of one project must be implemented and maintained every 10 years to qualify. STREAMSIDE, POND, AND WETLAND REVEGETATION Re-vegetating areas along creeks, streams, ponds, and wetlands to reduce erosion and sedimentation, stabilize stream banks, improve plant diversity, and improve wildlife value of sensitive areas. This practice can include: (a) the construction of permanent or temporary fences to exclude, limit, or seasonally graze livestock in order to prevent erosion; (b) the use of native hay to slow and spread water runoff in areas where vegetation has been recently reestablished (seeds in the hay aid in re-vegetation); (c) establishing vegetative buffer areas or filter strips along water courses or other runoff areas; (d) establishment of 3:1 upland buffer to lake basin/wetland acreage in diverse grass/legume/forb mixture to