CESSNA T182 T — Service Bulletins

This service bulletin, SEB-25-06, addresses the replacement of the glove box/map case latch assembly for specific Cessna aircraft models, including the Cessna T182T. The bulletin outlines the reasons for the replacement, which is due to the obsolescence of the old latch design and the introduction of a more robust camlock style latch. It provides detailed instructions for compliance, including parts required and procedures to follow during maintenance. The document is intended for aircraft owners and maintenance personnel, emphasizing the importance of using approved parts and following the outlined procedures to ensure safety and compliance with FAA regulations.

• The service bulletin applies to Cessna T182T aircraft with serial numbers T18208001 thru T18209100.
• The old glove box latch is obsolete; a new camlock style latch is recommended for replacement.
• Compliance is recommended during scheduled maintenance or inspections.
• Specific part numbers for required components are detailed in the bulletin.
• The bulletin emphasizes the importance of using approved parts and following outlined procedures.