Specifications for the CESSNA 177

Parameter Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Vibration MIL-STD-883, Method 2007, Condition A Solderability IPC J-STD-002 Thermal Cycle MIL-STD-883 Method 1010, Condition B Parameter Unit VCC Supply Voltage -0.5V to +7.0V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Model Min. Voltage Condition Human Body Model 2000V MIL-STD-883 3015.7 Machine Model 200V EIAJ ED-4701/304 Environmental / ESD Ratings Notes: CL: 15pF Includes the input capacitance of oscilloscope * 0.01~0.1μF external by-pass filter is recommended Product information is current as of publication date. The product conforms to specifications per the terms of the Cardinal standard warranty. June 27, 2024 Rev. E Production processing does not necessarily include testing of all parameters. Copyright © 2024 Cardinal Components Inc  19013 36th Ave. W, Lynnwood, WA 98036 USA www.cardinalxtal.com  973-785-1333 Pg 5 CPP_7 Series CMOS Clock Oscillator The part may be reflowed 2 times without degradation (typical for lead free processing). Reflow Cycle Tape and Reel Tape Variable Dimensions Table 2 Part Size Tape Size E2 typ F P1 W max Ao Bo Ko Qty/reel standard 7050 16mm 14.25 7.5 ±0.05 8.0 ±0.1 16.3 5.56±0.1 7.85±0.1 2±0.1 1K Dimensions in mm Drawings Not to scale Note 1: Embossed cavity to conform to EIA– 481-B Reel Dimensions (may vary) Table 3 A B C D Reel Size Inches mm Inches mm mm mm 7 7.0 180 2.50 60 13.0 +0.5 -0.2 Tape size +0.4 +2.0 -0.0 13 13.0 330 3.75 100 Tape Constant Dimensions Table 1 Tape Size Do D1 typ E1 Po P2 T typ T1 max 16mm 1.5 +0.1 -0.0 1.5 1.75 ±0.1 4.0 ±0.1 2.0 ±0.1 0.3 0.1 Tape and Reel available for quantities of 250 to 1000 per reel, cut tape for < 250. 16mm tape, 8mm pitch. Product information is current as of publication date. The product conforms to specifications per the terms of the Cardinal standard warranty. June 27, 2024 Rev. E Production processing does not necessarily include testing of all parameters. Copyright © 2024 Cardinal Components Inc  19013 36th Ave. W, Lynnwood, WA 98036 USA www.cardinalxtal.com  973-785-1333 Pg 6 CPP_7 Series CMOS Clock Oscillator Important Notice Cardinal Components (CC) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. CC reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such infor- mation is current and complete. All products are sold subject to CC’s terms and conditions of sale supplied at the time of order acknowledgment. CC warrants performance of this product to the specifications applicable at the time of sale in accordance with CC’s limited warranty. Testing and other quality control techniques are used to the extent CC deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. CC assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using CC components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. CC products are not designed, intended, authorized or warranted to be suitable for use in life support applications, weapons, weapon systems or space applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of CC products in such applications is understood to be fully at the risk of the customer. Use of CC products in such applications requires the written approval of an appropriate CC officer. Questions concerning potential risk applica- tions should be directed to CC. CC does not warrant or represent that any license, either express or implied, is granted under any CC patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which CC product or services are used. Information published by CC regarding third-party products or services does not con- stitute a license from CC to use such products or services or a warranty or endorsement thereof. Use of such infor- mation may require a license from a third party under the patents or other intellectual property of the third party, or a license from CC under the patents or other intellectual property of CC. Reproduction of information in CC data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. CC is not responsible or liable for such altered documents. Resale of CC products or services with statements different from or beyond the parameters stated by CC for that product or service voids all express and implied warranties for the associated CC product or service and is an un- fair or deceptive business practice. CC is not responsible for any such statements. Contacting Cardinal Components Cardinal Components Tel: 973-785-1333 19013 36th Ave. West Fax: 425.776.2760 Lynnwood, WA 98036-5761 email: sales@cardinalxtal.com U.S.A. URL: www.cardinalxtal.com