Hartzell Propeller

Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA CARDINAL Applicable Models: 177B (180 hp) 177RG, F177RG Reims (200 hp) Specifications: 74 inch diameter 3-bladed aluminum hub propeller 2400 hour / 6 year TBO 73 pounds (propeller and spinner) Diameter reduction allowable to 73 inches Placard -”Avoid continuous operations below 15” between 1950 and 2350 RPM.” Replaces: McCauley C202 - 76 inch diameter 2-bladed prop (177B) Diameter reduction allowable to 75 inches 2000 hour / 6 year TBO McCauley C206 - 78 inch diameter 2-bladed prop (177B, 177RG) Diameter reduction allowable to 74 ins.(177B), 76.5 ins.(177RG) 2000 hour / 6 year TBO McCauley C207 - 78 inch diameter 2-bladed prop (177RG) Diameter reduction 76.5inches 2000 hour / 6 year TBO McCauley C208 or C211 - 76 inch diameter 2-bladed prop (177B) Diameter reduction allowable to 75 inches 2000 hour / 6 year TBO Advantages: Better take-off and climb performance Longer TBO Lower noise Improved appearance Less blade tip erosion Greater repair allowance T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 180 (Land, Sea or Amphibian) O-470-A,-J,-K,-L,-R,-S,-U engine Basic Kit: (180-180J w/ O-470-A,-J,-K,-L,-R,-S) Part Number: C3F00001STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: C- 353 5-1 P 1 STC Document Se t: SA00 85 2AT Basic Kit: (180K w/ O-470-U) Part Number: C3F00890STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: C- 353 5-1 P 1 STC Document Se t: SA00 85 2AT __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 180 Applicable Models: 180 series (land, sea or amphibian) *Note: a governor change may be required in some cases Specifications: 80 inch diameter 3-bladed, aluminum hub propeller 2400 hour / 6 year TBO 75 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: Hartzell 82XF- 84 or 88 inch dia., 2-bladed steel hub prop Diameter reduction allowable to 82.5 or 86 inches 1000 hours / 5 year TBO McCauley 2A36C - 82 or 88 inch diameter 2-bladed propeller Diameter reduction allowable to 80 or 86 inches 1000-1500 hours / 5 year TBO McCauley 2A34C - 82 or 88 inch diameter 2-bladed propeller Diameter reduction allowable to 80 or 86 inches 1000-1500 hours / 5 year TBO McCauley C66 - 82 or 88 inch diameter 2-bladed propeller Diameter reduction allowable to 80 or 86 inches 1200-1500 hours / 5 year TBO McCauley C201 - 82 or 88 inch diameter 2-bladed propeller Diameter reduction allowable to 80 or 86.5 inches 1500 hour / 5 year TBO McCauley C203 - 82 or 88 inch diameter 2-bladed propeller Diameter reduction allowable to 80 or 86.5 inches 2000 hour / 6 year TBO McCauley C204 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2000 hour / 6 year TBO Advantages: Better take-off and climb performance Excellent acceleration to step Longer TBO Dramatically lower noise Improved appearance Less blade tip erosion Current design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 182, 182A-182R With O-470-L, -R, -S, -U engine Basic Kit: (182-182G w/ O-470-L, -R, -S engine) Part Number: G3F00006STP 1 3-Bladed Propeller: PHC-G3YF-1RF/F7691 1 Polished Spinner: D- 479 8-3 P 1 STC Document Se t: SA09 00 0SC Basic Kit: (182H-182P w/ O-470-L, -R, -S engine) Part Number: G3F00006STP*1 1 3-Bladed Propeller: PHC-G3YF-1RF/F7691 1 Polished Spinner: D- 479 8-1 P 1 STC Document Se t: SA09 00 0SC Basic Kit: (182Q-182R w/ O-470-U engine) Part Number: G3F00008STP 1 3-Bladed Propeller: PHC-G3YF-1RF/F7691 1 Polished Spinner: D- 479 8-1 P 1 STC Document Se t: SA09 00 0SC __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 182 Applicable Models: 182, 182A-R (0-470-L,R,S, and U engines) *Note: a governor change may be required in some cases. Specifications: 78 inch diameter 3-bladed, scimitar, aluminum hub propeller 2400 hour / 6 year TBO 75 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: Hartzell 82XF- 82 inch diameter, 2-bladed steel hub propeller Diameter reduction allowable to 80 inches 1000 hour / 5 year TBO McCauley 2A36C - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1000-1500 hours/5 year TBO McCauley 2A34C - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1000-1500 hours/5 year TBO McCauley C66 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1200-1500 hours/5 year TBO McCauley C201 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1500 hours/5 year TBO McCauley C203 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2000 hour / 6 year TBO McCauley C204 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2000 hour / 6 year TBO Advantages: Better take-off and climb performance Same or slightly better cruise performance Longer TBO Dramatically lower noise Improved appearance Less blade tip erosion Current design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 182, 182A-182P With O-470-L, -R, -S engine Basic Kit: (182-182G) Part Number: G2F00011STP 1 2-Bladed Propeller: BHC-G 2YF-1 BF/F846 8 A-2R 1 Polished Spinner: D- 479 8-2 P 1 STC Document Se t: SA09 00 0SC Basic Kit: (182H-182P) Part Number: G2F00011STP*1 1 2-Bladed Propeller: BHC-G 2YF-1 BF/F846 8 A-2R 1 Polished Spinner: D- 479 8P 1 STC Document Se t: SA09 00 0SC __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 182 Applicable Models: 182, 182A-P (0-470-L, -R, and -S engines) *Note: a governor change may be required in some cases. Specifications: 82 inch diameter 2-bladed, aluminum hub propeller 2400 hour / 6 year TBO 61 pounds (propeller and spinner) Diameter reduction allowable to 80 inches Replaces: Hartzell 82XF- 82 inch diameter, 2-bladed steel hub propeller Diameter reduction allowable to 80 inches 1000 hour / 5 year TBO McCauley 2A36C - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1000-1500 hours/5 year TBO McCauley 2A34C - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1000-1500 hours/5 year TBO McCauley C66 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1200-1500 hours/5 year TBO McCauley C201 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1500 hours/5 year TBO McCauley C203 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2000 hour / 6 year TBO Advantages: Longer TBO Current design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 182S, 182T, T182T with IO-540-AB1A5, TIO-540-AK1A Basic Kit: Part Number: F3R00600STP 1 3-Bladed Propeller: HC- F3 YR-1 AR F/F8 068 1 Polished Spinner: A-2295-3P 1 STC Document Se t: SA03 07 8CH Kit with Electric de-ice: Part Number: F3R00650STP 1 3-Bladed Propeller: HC- F3 YR-1 AR F/F8 068 K 1 Polished Spinner: A-2 295 -14P 1 A i rf ra me d e- ic e k it : 1 04 522 1 STC Document Se t: SA03 07 8CH T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 182S, 182T, T182T Applicable Models: 182S, 182T, T182T Specifications: 82 inch dia 3-bladed, Scimitar, aluminum, extended hub prop Compatible De-ice (replaces 3 blade to 3 blade only) 2400 hour / 6 year TBO 86.0 pounds (propeller and spinner) Diameter reduction allowable to 80 inches Replaces: McCauley C235 – 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.0 inches 2400 hour / 6 year TBO McCauley C431 79 inch diameter 3-bladed propeller Diameter reduction allowable to 77.0 inches 2400 hour / 6 year TBO McCauley C442 79 inch diameter 3-bladed propeller Diameter reduction allowable to 77.0 inches 2400 hour / 6 year TBO Advantages: Improved climb performance - + 8.5% over 79” McCauley Better cruise performance than 79” McCauley (2-4 knots) Noise – 77.5 dB(a) measured per FAR 36, Appendix G, and also meets ICAO Annex 16, Chapter 10 noise standards. Improved appearance Current design MCT April 2012 T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna A188, A188A, A188B With IO-520-D engine Basic Kit: Part Number: C3F00129STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: C- 353 5-1 P 1 STC Document Se t: SA00 47 0AT __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA A188 SERIES Applicable Models: A188, A188A, A188B Specifications: 80 inch diameter 3-bladed, aluminum hub propeller 2000 hour / 3 year recommended TBO, for agricultural aircraft 81 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: McCauley C58 - 82 inch diameter 2-bladed prop Diameter reduction allowable, 82 to 80 inches 1200 hour / 5 year TBO McCauley C58 - 86 inch diameter 2-bladed prop Diameter reduction allowable to 84 inches Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C98 - 82 inch diameter 2-bladed prop Diameter reduction allowable, 82 to 80 inches 1200 hour / 5 year TBO McCauley C98 - 86 inch diameter 2-bladed prop Diameter reduction allowable, 86 to 84 inches 1200 hour / 5 year TBO McCauley C90 - 80 inch diameter 3-bladed prop Diameter reduction allowable, 80 to 78.5 inches 1200 hour / 5 years TBO McCauley C205 - 86 inch diameter 2-blade prop Diameter reduction allowable, 86 to 84.5 inches 1200 hour / 5 year TBO McCauley C408 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 1200 hour / 5 year TBO Advantages: vs. McCauley C58 and C98 2-bladed models Better take off and climb performance Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C90 3-bladed model Better take off and climb performance Current design, Mc threaded design obsolete vs. McCauley C205 2-bladed model Dramatically lower noise Less blade tip erosion vs. McCauley C408 3-bladed model Better take-off and climb performance T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 206, U206, U206A, P206A, TP206A, TU206A thru F (to s/n: U20602199), U206B thru G (to s/n: U206-04074) With IO-520-A, -F, TSIO-520, -C, -M engine Ba s ic K it: U2 06B t hru U 20 6G (to s /n: U 206 040 74) ( 78” dia met er) (1 0 ˚ low pitch) (HC indexing) Part Number: C3F0 0050STP*1 1 3-Bladed Propeller: HC-C 3Y F-1R F /F846 8A-8R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA685AL Ba s ic K it: 206, U206, U206A, P206A, TP206A, TU206A thru F (to s/n: U20602199) (7 8” dia met er) ( 11 .5˚ low pitch) (HC indexing) Part Number: C3F0 0053STP 1 3-Bladed Propeller: HC-C 3Y F-1R F /F846 8A-8R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA685AL Ba s ic K it: U2 06B t hru U 20 6G (to s /n: U 206 040 74) ( 78” dia met er) (1 0 ˚ low pitch) (PHC indexing) Part Number: C3F0 0131STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-8R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA685AL Ba s ic K it: 206, U206, U206A, P206A, TP206A, TU206A thru F (to s/n: U20602199) (7 8” dia met er) ( 11 .5˚ low pitch) (PHC indexing) Part Number: C3F0 0136STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-8R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA685AL __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 SERIES Applicable Models: 206, U206A-U206G (to S/N U20604074), TU206 (to S/N U20602199), (T)P206A Specifications: 78 inch diameter 3-bladed aluminum hub propeller 2400 hour / 6 year TBO 76 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: McCauley C58, C78 - 82 inch diameter 2-bladed prop Diameter reduction allowable to 80 inches Oil fill requirement per AD 91-15-04 1200 - 1500 hours/5 year TBO McCauley C79 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200 hours/5 year TBO McCauley C90 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200 - 1500 hour/5 year TBO Advantages: vs. McCauley C58, C78 2-bladed model Better take-off and climb performance Longer TBO Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C79 3-bladed model Longer TBO Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C90 3-bladed model Faster cruise speed Lower noise Longer TBO Less blade tip erosion Greater repair allowance Current design, Mc threaded design obsolete T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 206, U206, U206A, P206A, TP206A, TU206A thru F (to s/n: U20602199), U206B thru G (to s/n: U206-04074) With IO-520-A, -F, TSIO-520, -C, -M engine Ba s ic K it: U2 06B t hrough U2 06G ( to s /n: U2 060 40 74) ( 80” diamet er) (10 ˚ low pitch) Part Number: C3F0 0119STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA685AL Ba s ic K it: 206, U206, U206A, P206A, TP206A, TU206A thru F (to s/n: U20602199) (80” diameter) ( 11 .5˚ low pit ch) Part Number: C3F0 0133STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA685AL __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 SERIES Applicable Models: 206, U206A - U206G (to S/N U20604074) TU206 (to S/N U20602199), (T)P206A * Note: This propeller should be especially effective for aircraft operating on floats, out of short fields, or with heavy loads. Specifications: 80 inch diameter 3-bladed aluminum hub propeller 2400 hour / 6 year TBO 77 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: McCauley C58, C78 - 82 inch diameter 2-bladed prop Diameter reduction allowable to 80 inches Oil fill requirement per AD 91-15-04 1200 - 1500 hours/5 year TBO McCauley C79 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200 hours/5 year TBO McCauley C90- 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200-1500 hour / 5 year TBO Advantages: vs. McCauley C58, C78 2-bladed model Better take-off and climb performance Longer TBO Lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C79 3-bladed model Longer TBO Lower noise Greater repair allowance Current design, Mc threaded design obsolete vs. McCauley C90 3-bladed model Lower noise Longer TBO Greater repair allowance Current design, Mc threaded design obsolete T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna U206G (s/n: U20604075 and up), P206 thru P206E, TP206A thru TP206E, TU206F (s/n: U206-02200 to U206-03521), TU206G With IO-520-A, -F, TSIO-520, -C, -M engine Ba s ic K it: U2 06G (s /n: U20 6-0 40 75 a nd up) (78” diamet er) (10˚ low pit ch) Part Number: J3F0 0017STP 1 3-Bladed Propeller: PHC-J3 YF- 1RF/F84 68 A- 8R 1 Polished Spinner: C- 458 2- P 1 STC Document Se t: SA685AL Ba s ic K it: P206 thru P206E, TP206A thru TP206E, TU206F (s/n: U206-02200 to U206-03521), TU206G (78” diameter) (1 1 .5˚ low pitch) Part Number: J3F0 0011STP 1 3-Bladed Propeller: PHC-J3 YF- 1RF/F84 68 A- 8R 1 Polished Spinner: C- 458 2- P 1 STC Document Se t: SA685AL __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 SERIES Applicable Models: U206G (from S/N U20604075) TU206 (from S/N U20602200), (T)P206 Specifications: 78 inch diameter 3-bladed aluminum, extended hub propeller 2400 hour / 6 year TBO 78 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: McCauley C64, C73 - 82 inch diameter 2-bladed prop Diameter reduction allowable to 80 inches Oil fill requirement per AD 91-15-04 1200 - 1500 hours/5 year TBO McCauley C77, C88 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200 hours/5 year TBO McCauley C402, C404 - 80 inch 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: vs. McCauley C64, C73 2-bladed model Better take-off and climb performance Longer TBO Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C77 3-bladed model Longer TBO Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C88 3-bladed model Faster cruise speed Lower noise Longer TBO Less blade tip erosion Greater repair allowance Current design, Mc threaded design obsolete vs. McCauley C402, C404 3-bladed model Longer TBO Increased ground clearance Lower tip speed (reduced noise) T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna U206G (s/n: U20604075 and up), P206 thru P206E, TP206A thru TP206E, TU206F (s/n: U206-02200 to U206-03521), TU206G With IO-520-A, -F, TSIO-520, -C, -M engine Ba s ic K it: U2 06G (s /n: U20 6040 75 a nd up) (80” diamet er) (10˚ low pit ch) Part Number: J3F0 0016STP 1 3-Bladed Propeller: PHC-J3 YF- 1RF/F84 68 A- 6R 1 Polished Spinner: C- 458 2- P 1 STC Document Se t: SA685AL Ba s ic K it: P206 thru P206E, TP206A thru TP206E, TU206F (s/n: U206-02200 to U206-03521) (80” diameter), TU206G (1 1 .5 ˚ low pitch) Part Number: J3F0 0012STP 1 3-Bladed Propeller: PHC-J3 YF- 1RF/F84 68 A- 6R 1 Polished Spinner: C- 458 2- P 1 STC Document Se t: SA685AL __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 SERIES Applicable Models: U206G (from S/N U20604075) TU206 (from S/N U20602200), (T)P206 * Note: This propeller should be especially effective for aircraft operating on floats, out of short fields, or with heavy loads. Specifications: 80 inch diameter 3-bladed aluminum, extended hub propeller 2400 hour / 6 year TBO 79 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: McCauley C64, C73 - 82 inch diameter 2-bladed prop Diameter reduction allowable to 80 inches Oil fill requirement per AD 91-15-04 1200 - 1500 hours/5 year TBO McCauley C77, C88 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200 hour / 5 year TBO McCauley C402, C404 - 80 inch diameter 3-blade prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: vs. McCauley C64, C73 2-bladed model Better take-off and climb performance Longer TBO Lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C77, C88 3-bladed model Longer TBO Lower noise Greater repair allowance Current design, Mc threaded design obsolete vs. McCauley C402, C404 3-bladed model Longer TBO Greater repair allowance T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 207, 207A With IO-520-F engine Basic Kit: (78” diameter) Part Number: C3F00052STP 1 3-Bladed Propeller: HC-C 3Y F-1R F /F846 8A-8R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA696AL Basic Kit: (80” diameter) Part Number: C3F00119STP*1 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA696AL __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 207 SERIES Applicable Models: 207, 207A Specifications: 78 or 80 inch diameter 3-bladed aluminum hub propeller 2400 hour / 6 year TBO 76 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: McCauley C58, C78 - 82 inch diameter 2-bladed prop Diameter reduction allowable to 80 inches Oil fill requirement per AD 91-15-04 1200 - 1500 hours/5 year TBO McCauley C79 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200 hours/5 year TBO McCauley C90 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78 inches 1200 - 1500 hour/5 year TBO Advantages: vs. McCauley C58, C78 2-bladed model Better take-off and climb performance Longer TBO Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C79 3-bladed model Longer TBO Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C90 3-bladed model Faster cruise speed Lower noise Longer TBO Less blade tip erosion Greater repair allowance Current design, Mc threaded design obsolete T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 208, 208A, 208B Caravan With PT6A-114, -114A engine ( N o t e: P l eas e s ee r e ve r s e f o r p h o t o g r ap h o f p r o p e ll e r) B a s i c K i t : (w / o s t a rt - l o c k s o r d e - i c e ) P a r t N u m b e r : B 3 N 0 0 1 2 0 S T P 1 3 - B l a d e d P r o p el l e r : H C - B 3 T N - 3 A F / T 1 0 8 9 0 C N - 2 1 P o li sh e d S p i n n e r: D- 4 8 97 - P 1 S T C D o c u m e n t S e t : S A 0 2 1 8 1 AK K i t w it h E le c t r ic D e- ic e : (w /o st a r t - l o ck s) P a r t N u m b e r : B 3 N 0 0 1 1 9 S T P 1 3 - B l a d e d P r o p el l e r : H C - B 3 T N - 3 A F / T 1 0 8 9 0 C N K - 2 1 P o li sh e d S p i n n e r: D- 4 8 97 - P 1 E l e c t r i c D e - i c e k i t ( p r o p ) : 7 9 3 1 - 5 E 2 7 1 5 - 1 1 S T C D o c u m e n t S e t : S A 0 2 1 8 1 AK K i t w i t h E l e c t r i c D e - i c e : (w / o s t a r t - l o ck s , r e p la c in g a M c C au l e y) P a r t N u m b e r : B 3 N 0 0 1 1 9 S T P * 1 1 3 - B l a d e d P r o p el l e r : H C - B 3 T N - 3 A F / T 1 0 8 9 0 C N K - 2 1 P o li sh e d S p i n n e r: D- 4 8 97 - P 1 E l e c t r i c D e - i c e k i t ( p r o p ) : 7 9 3 1 - 5 E 2 7 1 5 - 1 1 E l e c t r i c D e - i c e k i t ( a i r f r a m e ) : 7 9 3 1 - 5 E 2 7 1 5 - 3 1 S T C D o c u m e n t S e t : S A 0 2 1 8 1 AK B a s i c K i t : (w /st a rt - l o c k s ) P a r t N u m b e r : B 3 N 1 0 0 1 0 S T P 1 3 - B l a d e d P r o p el l e r : H C - B 3 T N - 3 A F Y / T 1 0 8 9 0 C N - 2 1 P o li sh e d S p i n n e r: D- 4 8 97 - P 1 S T C D o c u m e n t S e t : S A 0 2 1 8 1 AK K i t w i t h E l e c t r i c D e - i c e : (w / s t a rt - l o ck s) P a r t N u m b e r : B 3 N 1 0 0 2 0 S T P 1 3 - B l a d e d P r o p el l e r : H C - B 3 T N - 3 A F Y / T 1 0 8 9 0 C N K - 2 1 P o li sh e d S p i n n e r: D- 4 8 97 - P 1 E l e c t r i c D e - i c e k i t ( p r o p ) : 7 9 3 1 - 5 E 2 7 1 5 - 1 1 S T C D o c u m e n t S e t : S A 0 2 1 8 1 AK K i t w i t h E l e c t r i c D e - i c e : (w / s t a r t - l o c k s , r e p l a c i n g a M c C a u l e y) P a r t N u m b e r : B 3 N 1 0 0 2 0 S T P * 1 1 3 - B l a d e d P r o p el l e r : H C - B 3 T N - 3 A F Y / T 1 0 8 9 0 C N K - 2 1 P o li sh e d S p i n n e r: D- 4 8 97 - P 1 E l e c t r i c D e - i c e k i t ( p r o p ) : 7 9 3 1 - 5 E 2 7 1 5 - 1 1 E l e c t r i c D e - i c e k i t ( a i r f r a m e ) : 7 9 3 1 - 5 E 2 7 1 5 - 3 1 S T C D o c u m e n t S e t : S A 0 2 1 8 1 AK __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA CARAVAN Applicable Models: 208, 208A, 208B Specifications: 106 inch diameter 3-bladed, steel hub propeller Diameter reduction allowable to 104 inches Weight of propeller = 146.7 lbs. Spinner = 9.0 lbs. De-ice = 2.8 lbs. 3000 hour / 5 year TBO Replaces: McCauley C703 - 106 inch diameter 3-bladed prop Diameter reduction allowable to104 inches Weight of propeller = 117.0 lbs. Spinner = De-ice = 4000 hour / 6 year TBO Hartzell HC-B3MN - 100 inch diameter 3-bladed composite prop No diameter reduction allowable Weight of propeller = 134.7 lbs. Spinner = 9.0 lbs. De-ice = 2.8 lbs. 3000 hour / 5 year TBO Advantages: Climb and cruise performance are as good as or slightly better than the McCauley C703 (+25 ft/min, +3kts measured) Take off distance, unchanged Greatest blade repair allowance available for the Caravan Optional start-locks improve handling for float planes Notes: Approved for landplane & seaplane Standard installation of propeller, de-ice brushes/bracket Common electrical hardware not included in the de-ice kit T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 208, 208A, 208B Caravan With PT6A-114, -114A engine Basic Kit: Part Number: D4N00193STP 1 4-Bladed Propeller: HC-D4N-3R/D9511F 1 Polished Spinner: D-630-3P 1 STC Document Set: SA02092AK Kit with Electric De-ice: (Replacing a Hartzell) Part Number: D4N00192STP 1 4-Bladed Propeller: HC-D4N-3R/D9511FK 1 Polished Spinner: D-630-3P 1 Electric De-ice kit: B6844-1 1 STC Document Set: SA02092AK Kit with Electric De-ice: (Replacing a McCauley) Part Number: D4N00192STP *1 1 4-Bladed Propeller: HC-D4N-3R/D9511FK 1 Polished Spinner: D-630-3P 1 Electric De-ice kit: B6844 1 STC Document Set: SA02092AK __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA CARAVAN Applicable Models: 208, 208A, 208B Specifications: 96 inch diameter 4-bladed, aluminum hub propeller Diameter reduction allowable to 95 inches Weight increase (approximately): 14 lbs heavier than the McCauley C703 8 lbs heavier than the Hartzell HC-B3MN 4000 hour / 6 year TBO Placard: “Stabilized ground operation is prohibited between 440 and 1060 RPM.” Replaces: McCauley C703 - 106 inch diameter 3-bladed prop Diameter reduction allowable to104 inches 4000 hours / 6 years TBO Hartzell HC-B3MN - 100 inch diameter 3-bladed composite prop No diameter reduction allowable 3000 hour / 5 year TBO Advantages: 5 inches additional ground clearance over the McCauley C703 Longer TBO than Hartzell HC-B3MN Reduced noise Notes: Approved for landplanes only Meets POH climb and cruise performance Takeoff distance is approximately 5% longer (50 to 75 feet) at sea level and maximum weight Common electrical hardware not included in the de-ice kit T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 210 – 210C, 205, 205A With IO-470-E, -S engine Basic Kit: Part Number: C2F0 0355STP 1 2-Bladed Propeller: HC-C2YF-1BF/F8468A-2 1 Polished Spinner: C- 356 8- P 1 STC Document Se t: SA02 24 6CH-D __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 210 Applicable Models: 210, 210A, 210B, 210C, 210-5 (205), 210-5A (205A), (IO-470-E, IO-470-S engine) Note: Governor change may be necessary on some airplanes. Specifications: 82 inch diameter 2-bladed, aluminum hub 2400 hour / 6 year TBO 60.5 pounds (propeller and spinner) Diameter reduction allowable to 80 inches Replaces: Hartzell HC-A2XF-1/8433-2 82 inch steel hub propeller Diameter reduction allowable to 80 inches 1000 hr. / 5 year TBO 68 pounds (propeller and spinner) Subject to A.D. 97-18-02 Rev. 1 McCauley C58/C49/C33 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1200-1500 hours/5 year TBO 65/61.5 pounds (propeller and spinner) Subject to AD 63-08-04 and/or 64-24-04 Advantages: Current design Longer TBO No expensive or repetitive airworthiness directives Very reasonably priced Improved appearance T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 210F-N & T210F-L With IO-520-A,J,L or TSIO-520-C,H engines Basic Kit: Part Number: J3F0 0020STP 1 3-Bladed Propeller: PHC-J3YF- 1RF/F7691 1 Polished Spinner: C- 458 2- P 1 STC Document Se t: SA00 77 3AT __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 210 Applicable Models: 210 F,G,H,J,K,L,M,N (IO-520-A,J,L) T210F,G,H,J,K,L (TSIO-520-C,H) (NO 0-470 engines) *Note: The original STC was for the 210K, L, M & N models (IO- 520-L only), STC was amended in late 2009. **Note: A newer, blended airfoil scimitar propeller is also available for some of these models. Specifications: 78 inch dia 3-bladed, scimitar, aluminum, extended hub prop 2400 hour / 6 year TBO 77.3 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Placard - “Do not exceed 20 inch of manifold pressure below 2200 RPM.” Replaces: McCauley C70/73 – 82/83 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1200-1500 hours/5 year TBO Oil fill requirement per AD 91-15-04 McCauley C77/88 - 80 inch diameter 3-bladed propeller Diameter reduction allowable to 78 inches 1200-1500 hours/5 year TBO McCauley C404 - 82 inch diameter 3-bladed propeller Diameter reduction allowable to 78.5 inches 1700 hours/5 year TBO Advantages: Better take-off and climb performance Same or slightly better cruise performance Longer TBO Dramatically lower noise Improved appearance Less blade tip erosion Current design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 310, 310A, B, C, D, E, F, G, H, E310H With O-470-M, IO-470-D engine B a s ic K it : 3 10 , 3 10A , 3 10B Part Number: C2F0 0416STP 2 2-Bladed Propellers : HC-C2YF-2CU F/FC8468-3 2 Polished Spinners: C- 228 5-4 P 1 STC Document Se t: SA00 79 9CH Basic Kit: 310(C-H), E310H Part Number: C2F0 0418STP 2 2-Bladed Propellers : HC-C2YF-2CU F/FC8468-3 2 Polished Spinners: C- 228 5-4 P 1 STC Document Se t: SA00 79 9CH K it w it h A lc oh o l A nt i- ic e: 3 10 , 3 10A , 3 10B Part Number: C2F0 0417STP 2 2-Bladed Propellers : HC-C2YF-2CU F/FC8468B- 3 2 Polished Spinners: C- 228 5-4 P 1 A l cohol Ant i- ice k it: A- 237 4-1 1 STC Document Se t: SA00 79 9CH K it w ith A lc oh o l Ant i- ic e: 3 10(C-H) , E3 10H Part Number: C2F0 0419STP 2 2-Bladed Propellers : HC-C2YF-2CU F/FC8468B- 3 2 Polished Spinners: C- 228 5-4 P 1 A l cohol Ant i- ice k it: A- 237 4-1 1 STC Document Se t: SA00 79 9CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 310 Applicable Models: 310, 310A, 310B, 310C, 310D, 310E, 310F, 310G, 310H, E310H * Note: STC does not cover the C310 with the O-470-B engines Specifications: 81 inch diameter 2-bladed, aluminum hub propeller 2400 hour / 6 year TBO Diameter reduction allowable to 80 inches 68 pounds each (propeller and spinner) Placard - “Do not exceed 20 inches of manifold pressure between 2100 and 2250 rpm”. Replaces: Hartzell HC-82XF-2 or HC-A2XF-2 - 84 to 78 inch diameter 2-bladed steel hub propellers Diameter reduction allowable to 78 inches 72 pounds each (propeller and spinner) Blade retention system inspection AD 97-18-02 1000 hour / 5 year TBO McCauley C48 - 80 inch diameter 2-bladed propeller Diameter reduction allowable to 78 inches 72 pounds each (propeller & spinner) 1200 hour / 5 year TBO Advantages: Aircraft empty weight decreases by 8 pounds Eliminates AD 97-18-02 Current production design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 310I, 310P, T310P, 310Q, T310Q, 310R, T310R With O-470, IO-470, IO-520, TSIO-520 engine Basic Kit: Part Number: C3F0 0195STP 2 3-Bladed Propellers : PHC -C3YF- 2UF/FC7 663D -2R 2 Polished Spinners: C- 455 8-2 P 1 STC Document Se t: SA23 4CH K it w ith E le ctr i c De- ic e: (TS I O / IO- 52 0 en g in e) Part Number: C3F0 0198STP 2 3-Bladed Propellers : PHC -C3YF- 2UF /FC7 663D B- 2R 2 Polished Spinners: C- 455 8-2 P 1 E le ct ri c De - ice k it ( ai rf ra me) : 7 931 -65- 60 0-2 1 STC Document Se t: SA23 4CH K it w ith E le ctri c De- ic e: ( IO- 470 en g ine ) Part Number: C3F0 0198STP*1 2 3-Bladed Propellers : PHC -C3YF- 2UF /FC7 663D B- 2R 2 Polished Spinners: C- 455 8-2 P 1 E le ct ri c De - ice k it ( ai rf ra me) : 7 931 -65- 60 0-5 1 STC Document Se t: SA23 4CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 310 Applicable Models: 310I, 310P, T310P, 310Q, T310Q, 310R, T310R Specifications: 76 inch dia. 3-bladed, aluminum hub prop Diameter reduction allowable to 74 inches 2400 hour / 6 year TBO 88.6 pounds each (propeller and spinner) Replaces: McCauley C52, C71 - 81 inch diameter 2-bladed prop Diameter reduction allowable to 79 inches 66 pounds each (propeller & spinner) 1200 hour / 5 year TBO McCauley C87, C504 - 78 inch diameter 3-bladed Diameter reduction allowable to 74 inches 83 pounds each (propeller & spinner) 1200-1500 hour (C504 1600 hours) / 5 year TBO Advantages: vs. 2-bladed props Longer TBO Lower noise Improved appearance Improved ground clearance, less blade tip erosion Smoother overall operation vs. 3-bladed props Eliminates McCauley C87 inspection requirements Longer TBO Improved ground clearance, less blade tip erosion T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 310J, E310J, 310J-1, 310K, 310L, 310N With IO-470 engine Basic Kit: Part Number: J3F0 0072STP 2 3-Bladed Propellers : PHC -J3YF- 2UF/FC7 663D -2R 2 Polished Spinners: C- 455 8-2 P 1 STC Document Se t: SA23 4CH K it w ith E le ctri c De- ic e: Part Number: J3F0 0075STP 2 3-Bladed Propellers : PHC -J3YF- 2UF /FC7 663D B- 2R 2 Polished Spinners: C- 455 8-2 P 1 E le ct ri c De - ice k it ( ai rf ra me) : 7 931 -65- 60 0-5 1 STC Document Se t: SA23 4CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 310 Applicable Models: 310J, E310J, 310J-1, 310K, 310L, 310N Specifications: 76 inch dia. 3-bladed, aluminum, extended hub prop Diameter reduction allowable to 74 inches 2400 hour / 6 year TBO 92 pounds each (propeller and spinner) Replaces: McCauley C65, C81 - 81 inch diameter 2-bladed prop Diameter reduction allowable to 79 inches 66 pounds each (propeller & spinner) 1200-1500 hour / 5 year TBO McCauley C80 - 78 inch diameter 3-bladed Diameter reduction allowable to 74 inches 83 pounds each (propeller & spinner) 1200-1500 hour / 5 year TBO Advantages: vs. 2-bladed props Longer TBO Lower noise Improved appearance Improved ground clearance, less blade tip erosion Smoother overall operation vs. 3-bladed props Longer TBO Improved ground clearance, less blade tip erosion __________________________________________________________________________________________________ Aircraft Serial and regist ration numbers required w hen ordering All Prices FOB Hart zell Propeller Inc. Prices do not include Ohio St at e Sales Tax Inst allat ion and Dynam ic Balancing available at an addit ional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna A185E, A185F With IO-520-D engine Basic Kit: (78” Diameter) (HC Indexing) Part Number: C3F00050STP 1 3-Bladed Propeller: HC-C 3Y F-1R F /F846 8A-8R 1 Polished Spinner: C- 357 5- P 1 STC Document Se t: SA14 43NM Basic Kit: (78” Diameter) (PHC Indexing) Part Number: C3F00131STP*1 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-8R 1 Polished Spinner: C- 357 5- P 1 STC Document Se t: SA14 43NM __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 185 Applicable Models: A185E, A185F * Note: No engine mount change is required per the Hartzell STC paperwork. Changing to the heavier mounts, however, may be needed if vibration is experienced. ** Note: The STC paperwork only covers floats that were originally type certified on the aircraft. Specifications: 78 inch diameter 3-bladed, aluminum hub propeller 2400 hour / 6 year TBO 78 pounds (propeller and spinner) Diameter reduction allowable to 77 inches Replaces: McCauley C58 - 86 inch diameter 2-bladed prop Diameter reduction allowable to 84.5 inches Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C403 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: vs. McCauley C58 2-bladed model Better take off and climb performance Longer TBO Dramatically lower noise Improved looks Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C403 3-bladed model Better take-off and climb performance Longer TBO Lower noise Less blade tip erosion Current design, Mc threaded design obsolete T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna A185E, A185F With IO-520-D engine Basic Kit: (80” Diameter) Part Number: C3F00119STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: C- 357 5- P 1 STC Document Se t: SA14 43NM __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 185 Applicable Models: A185E, A185F * Note: No engine mount change is required per the Hartzell STC paperwork. Changing to the heavier mounts, however, may be needed if vibration is experienced. **Note: STC paperwork only covers floats that were originally type certified on the aircraft. ***Note: This propeller should be especially effective for aircraft operating on floats, out of short fields, or with heavy loads. Specifications: 80 inch diameter 3-bladed, aluminum hub propeller 2400 hour / 6 year TBO 78 pounds (propeller and spinner) Diameter reduction allowable to 79 inches Replaces: McCauley C58 - 86 inch diameter 2-bladed prop Diameter reduction allowable to 84.5 inches Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C403 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: vs. McCauley C58 2-bladed model Better take off and climb performance Longer TBO Dramatically lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C403 3-bladed model Better take-off and climb performance Longer TBO T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna T210M, T210N, & P210N TSIO-520-R, P, AF Basic Kit: Part Number: J3F0 0551STP 1 3-Bladed Propeller: HC-J 3YF-1R F/F806 8 1 Polished Spinner: C- 458 2-1 P 1 STC Document Se t: SA02 82 1CH Kit with Electric de-ice: Part Number: J3F0 0602STP 1 3-Bladed Propeller: HC-J 3YF-1R F /F 806 8B 1 Polished Spinner: C- 458 2-1 P 1 Propeller de-ice kit: 103 262 1 A i rf ra me d e- ic e k it : 1 03 308 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA T210M, T210N, P210N Applicable Models: T210M, T210N, and P210N Specifications: 82 inch dia 3-bladed, scimitar, aluminum, extended hub prop 2400 hour / 6 year TBO 84.75 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley 402 – 80 inch diameter 3-bladed propeller Diameter reduction allowable to 78.5 inches 1200-1500 hours/5 year TBO McCauley C88 - 80 inch diameter 3-bladed propeller Diameter reduction allowable to 78.5 inches 1200-1500 hours/5 year TBO Advantages: Better T.O and climb performance - 4% decrease in time to climb 23K Better cruise performance than C402 (1 - 3 knots) Noise reduction Longer TBO Improved appearance Current design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna R172K Hawk XP With IO-360-K, -KB engine Or IO-360-KC, -KBC engine (Isham STC) Basic Kit: Part Number: C3F00067STP 1 3-B l ad ed P rop e ll e r: H C-C 3 YF- 1R F/F 7 39 2 1 Po li sh ed Spi nne r: A- 22 9 5- 1P 1 ST C Do cum ent S et: S A 2 07 8 CH Basic Kit: (Isham STC) Part Number: C3F00069STP 1 3-B l ad ed P rop e ll e r: H C-C 3 YF- 1R F/F 7 39 2 1 Po li sh ed Spi nne r: A- 22 9 5- 1P 1 ST C Do cum ent S et: S A 2 07 8 CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA Applicable Models: R172K “Hawk XP” ( S/N R1722000 and on, 1977 through 1981 models) Specifications: 75-inch diameter 3-bladed aluminum hub propeller 2400 hour / 6 year TBO 74.4 pounds (propeller and spinner) Diameter reduction allowable to 72 inches Replaces: McCauley 2A34C203/90DCA-14, 76” diameter 2-bladed prop on landplanes. Does not replace 2A34C203/90DCA-10 80” propeller on floatplanes. 2000 hour / 6 year TBO 51.9 pounds (propeller and spinner) Advantages: - Takeoff acceleration to 55 KIAS is improved. - Full-power, best-rate climb performance below 10,000 is improved. - Cruise speeds at 60-80% power settings increase 1-3 Knots. - This STC is compatible with the Isham STCs (SA1437CE & SE1436CE) that increase the engine rating up to 210 Hp. -Longer TBO than McCauley 2-blade -Improved appearance, Scimitar-style blade planform -Diameter reduction allowable in event of tip damage - Compatible with Wipline 2350 Amphibious or Seaplane floats. June 2011 MCT T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna R182, FR182, TR182 with O-540-J3C5D, or O-540-L3C5D Basic Kit: Part Number: C3R 020 04 ST P 1 3-Bladed Propeller: HC-C 3YR -1R F/F806 8 1 Polished Spinner: A-2295-3P 1 STC Document Se t: SA03 07 8CH Kit Eligibility: R1 82 S/N R1 820 00 01 thr ou gh R1 820 131 3 . FR 182 S/N FR 18 2000 01 th rou gh FR0 004 5. O pt io na l: 1 008 03 Balanc e We igh t Kit REF: Cess na Service Kit SK182-72A eligibility TR182 s /n R 182 005 84 th ou gh R1 8201 313 on ly, p er TCD S 3A13. T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA R182, FR182, TR182 Applicable Models: R182, FR182, TR182 s/n R18200001 through R18201313, and FR18200001 through FR00045 Specifications: 82 inch dia 3-bladed, Scimitar, aluminum, extended hub prop 2400 hour / 6 year TBO 85.0 pounds (propeller and spinner) Diameter reduction allowable to 80 inches Replaces: McCauley C214 – 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2400 hour / 6 year TBO McCauley C217 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2400 hour / 6 year TBO McCauley C407 79 inch diameter 3-bladed propeller Diameter reduction allowable to 78.0 inches 2400 hour / 6 year TBO McCauley C433 79 inch diameter 3-bladed propeller Diameter reduction allowable to 77.0 inches 2400 hour / 6 year TBO Advantages: Improved climb performance - + 8.5% over 79” McCauley Better cruise performance than 79” McCauley (2-4 knots) Noise – 77.5 dB(a) measured per FAR 36, Appendix G, and also meets ICAO Annex 16, Chapter 10 noise standards. Improved appearance Current design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna R182, FR182, TR182, and T182 with O-540-J3C5D, or O-540-L3C5D Basic Kit: Part Number: I3R 0020 3 ST P 1 3-Bladed Propeller: HC- I3YR -1R F/F806 8 1 Polished Spinner: D- 675 0- P 1 STC Document Se t: SA03 07 8CH Kit with electric De-ice: Part Number: I3R 0025 0 ST P 1 3-Bladed Propeller: HC- I3YR -1R F/F806 8B 1 Polished Spinner: 1 050 12 P 1 A irf ra me De -ice K it: 104996 1 STC Document Se t: SA03 07 8CH Kit Eligibility: R1 82 , TR 18 2 S/N R 18 201 314 thr oug h R182 020 41 . FR 182 S/N FR 18 2000 46 th rou gh FR0 007 0. T182 S/N 1826 7716 th rough 1826 8368, an d 1 82- 683 69 thr ou gh 18 2-6 854 1 . O pt io nal: 1 100 800 Ba la nce We ig h t Kit REF: Cess na Se rvic e Kit SK182-71E. See next page for eligibility details. T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA R182, FR182, TR182, T182 Applicable Models: R182, FR182, TR182 and T182 s/n R18201314 through R18202041, FR18200046 through FR00070, and T182 18267716 though 18268368, and 182-68369 through 182-68541. Specifications: 82 inch dia 3-bladed, Scimitar, aluminum, extended hub prop Compatible De-ice:( Replaces 3 blade to 3 blade only) 2400 hour / 6 year TBO 85.0 pounds (propeller and spinner) Diameter reduction allowable to 80 inches Replaces: McCauley C218 – 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2400 hour / 6 year TBO McCauley C219 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2400 hour / 6 year TBO McCauley C407 79 inch diameter 3-bladed propeller Diameter reduction allowable to 78.0 inches 2400 hour / 6 year TBO McCauley C431 79 inch diameter 3-bladed propeller Diameter reduction allowable to 77.0 inches 2400 hour / 6 year TBO Advantages: Improved climb performance - + 8.5% over 79” McCauley Better cruise performance than 79” McCauley (2-4 knots) Noise – 77.5 dB(a) measured per FAR 36, Appendix G, and also meets ICAO Annex 16, Chapter 10 noise standards. Improved appearance Current design Notes: Balance Weight Kit eligibility per SK182-71E: R182 s/n R18201314 through R18201628, FR82 s/n FR18200046 through FR18200070, TR182 R18201314 through R18201628, R182 s/n R18201629 through R18202041 (per TCDS 3A13, Rev. 69), TR182 s/n R18201629 and later (per TCDS 3A13, Rev. 69). T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna T206H with TIO-540-AJ1A Basic Kit: Part Number: F3R00601STP 1 3-Bladed Propeller: HC- F3 YR-1 AR F/F8 068 1 Polished Spinner: D- 457 8-1 P 1 STC Document Se t: SA03 16 2CH Kit with Electric de-ice: Part Number: F3R00651STP 1 3-Bladed Propeller: HC- F3 YR-1 AR F/F8 068 K 1 Polished Spinner: D- 457 8-1 P 1 A i rf ra me d e- ic e k it : 1 04 522 1 STC Document Se t: SA03 16 2CH T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA T206H Applicable Models: T206H Specifications: 82 inch dia 3-bladed, Scimitar, aluminum, extended hub prop Compatible De-ice (replaces 3 blade to 3 blade only) 2400 hour / 6 year TBO 86.0 pounds (propeller and spinner) Diameter reduction allowable to 80 inches Replaces: McCauley C432 79 inch diameter 3-bladed propeller Diameter reduction allowable to 77.0 inches 2400 hour / 6 year TBO Advantages: Improved climb performance - + 10% (60 fpm) over 79” McCauley at maximum gross weight. Better cruise performance than 79” McCauley (1-4 knots delta improves with altitude). Noise – 81.2 dB(a) measured per FAR 36, Appendix G. Compatible De-ice T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna T207, T207A With TSIO-520-G, -M engine Basic Kit: (80” diameter) Part Number: C3F00139STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8468A-6R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA696AL __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA T207 SERIES Applicable Models: T207, T207A Specifications: 80 inch diameter 3-bladed aluminum hub propeller 2400 hour / 6 year TBO 79 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: (T207) McCauley C78 - 81.5 inch diameter 2-bladed prop Diameter reduction allowable to 80.5 inches Oil fill requirement per AD 91-15-04 1200 - 1500 hour / 5 year TBO (T207) McCauley C90 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 79 inches 1200 - 1500 hour / 5 year TBO (T207A) McCauley C401 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: vs. McCauley C78 2-bladed model Better take-off and climb performance Longer TBO Lower noise Less blade tip erosion Current design, Mc threaded design obsolete vs. McCauley C90 3-bladed model Longer TBO Greater repair allowance Current design, Mc threaded design obsolete vs. McCauley C401 3-bladed model Longer TBO Greater repair allowance T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna U206B – U206G (s/n U20604074) with IO- 520-F engine Basic Kit: Part Number: C3F0 7550STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F806 8- 2 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 (IO-520 powered) Applicable Models: U206B through U206G (s/n U20604074). (IO-520-F) Specifications: 80 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C58 /C78 – 82 - 86 inch diameter 2-bladed prop Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C79 / C90 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades KF 6/12 T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna Late U206G (s/n U20604075 and after) with IO-520-F engine Basic Kit: Part Number: J3F0 0501STP 1 3-Bladed Propeller: HC-J 3YF-1R F/F806 8- 2 1 Polished Spinner: C- 458 2-1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com KF 6/12 T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 (IO-520 powered) Applicable Models: U206G (s/n U20604075 and after). (IO-520-F) Specifications: 80 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 84.75 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C404 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2400 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 210 thru 210C, 210-5, and 210-5A with IO- 470-E or -S engine Basic Kit: Part Number: C3F0 1901STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8068 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 210 (IO-470 powered) Applicable Models: 210 thru 210C, 210-5, and 210-5A (IO-470-E, -S) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C33/C34/C58/C49 – 82 inch diameter 2- bladed propeller Diameter reduction allowable to 80.0 inches 1200-1500 hours/5 year TBO Oil fill requirement per AD 91-15-04 McCauley C435 – 80 inch diameter 3- bladed propeller Diameter reduction allowable to 78.0 inches 2400 hours/6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 210D with IO-520-A engine Basic Kit: Part Number: C3F0 7100STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F806 8 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 210D Applicable Models: 210D (IO-520-A) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C58 – 82 inch diameter 2- bladed propeller Diameter reduction allowable to 80.0 inches 1200-1500 hours/5 year TBO Oil fill requirement per AD 91-15-04 McCauley C230 – 82 inch diameter 2 bladed propeller Diameter reduction allowable to 80.0 inches 2400 hours/6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 210E-J, T210F – L with IO-520-A, -J, TSIO- 520-C, -H engine Basic Kit: Part Number: J3F0 0552STP 1 3-Bladed Propeller: HC-J 3YF-1R F/F806 8 1 Polished Spinner: C- 458 2-1 P 1 STC Document Se t: SA02 82 1CH Kit with Electric de-ice (28 volt system only): Part Number: J3 F0 060 1 STP or J3 F0 060 1STP*1 1 3-Bladed Propeller: HC-J 3YF-1R F /F 806 8B 1 Polished Spinner: C- 458 2-1 P 1 Propeller de-ice kit: 103 262 1 A i rf ra me d e- ic e k it : 1 03 307 or 1 03 308 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 210, T210 Applicable Models: 210E-J (IO-520-A, -J engine), T210F-K, T210L (TSIO-520-C, -H engine) *De-ice note: 28volt 3 blade to 3 blade electric de-ice system only. Aircraft must have been previously equipped with de-ice. Electric de-ice kit eligible on model T210L only. Aircraft s/n 21059503 through 21061141 require a 103307 airframe kit which includes new slip ring, modular brush block assy, etc. Aircraft s/n 21061142 through 21061573 requires a 103308 airframe kit which utilizes all major components of the aircraft’s original propeller de-ice system. A J3F00601STP*1 kit should be ordered for the earlier serial number range. Specifications: 82 inch dia 3-bladed, scimitar, aluminum, extended hub prop 2400 hour / 6 year TBO 84.75 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C70/C73 – 82/83 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1200-1500 hours/5 year TBO Oil fill requirement per AD 91-15-04 McCauley C77/C88 - 80 inch diameter 3-bladed propeller Diameter reduction allowable to 78 inches 1200-1500 hours/5 year TBO Advantages: Better take-off and climb performance Better cruise performance Noise reduction Longer TBO Improved appearance Current design KF 6/12 T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 210K thru 210N with IO-520-L engine Basic Kit: Part Number: J3F0 0501STP 1 3-Bladed Propeller: HC-J 3YF-1R F/F806 8- 2 1 Polished Spinner: C- 458 2-1 P 1 STC Document Se t: SA02 82 1CH Kit with Electric de-ice (28 volt system only): Part Number: J3 F0 065 0 STP or J3 F0 065 0STP*1 1 3-Bladed Propeller: HC-J 3YF-1R F/F806 8B-2 1 Polished Spinner: C- 458 2-1 P 1 Propeller de-ice kit: 103 262 1 A i rf ra me d e- ic e k it : 1 03 307 or 1 03 308 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com KF 6/12 T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 210K, 210L, 210M, 210N Applicable Models: 210K through 210N (IO-520-L engine) *De-ice note: 28volt 3 blade to 3 blade electric de-ice system only. Aircraft must have been previously equipped with de-ice. Electric de-ice kit eligible on model 210L and later. Aircraft s/n 21059503 through 21061141 require a 103307 airframe kit which includes new slip ring, modular brush block assy, etc. Aircraft s/n 21061142 and after require a 103308 airframe kit which utilizes all major components of the aircraft’s original propeller de-ice system. Specifications: 80 inch dia 3-bladed, scimitar, aluminum, extended hub prop 2400 hour / 6 year TBO 84.75 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C73/203 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1200-1500 hours/5 year TBO or 2400 hours / 6 years Oil fill requirement per AD 91-15-04 McCauley C88/C404 - 80 inch diameter 3-bladed propeller Diameter reduction allowable to 78.5 inches 1200-1500 hours/5 year TBO or 2400 hours / 6 years Advantages: Better take-off and climb performance Better cruise performance Noise reduction Longer TBO Improved appearance Current design T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 180 thru 180K with O-470-A, -K, -J, -L, -R, -S, -U engine Basic Kit: Part Number: C3F0 1901STP (O-470- A, -K, J, L, -R, -S engine ) 1 3-Bladed Propeller: PHC-C3YF-1RF/F8068 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH Part Number: C3 F0 710 1 STP (O-4 70-U eng in e) 1 3-Bladed Propeller: HC-C 3YF-1R F/F806 8 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 180 Applicable Models: 180 thru 180K (O-470-A, -K, -J, -L, -R, -S, -U) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C1, C18, C29, C50, C66 88/82 inch diameter 2- bladed propeller Diameter reduction allowable to 86.0/80.0 inches 1200-1500 hours/5 year TBO Oil fill requirement per AD 91-15-04 McCauley C203 – 88/82 inch diameter 2- bladed propeller Diameter reduction allowable to 86.5/80.5 inches 2400 hours/6 year TBO McCauley C204 – 90/82 inch diameter 2- bladed propeller Diameter reduction allowable to 88.5/80.5 inches 2400 hours/6 year TBO McCauley C435 – 80.0 inch diameter 3- bladed propeller Diameter reduction allowable to 78.0 inches 2400 hours/6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 182 thru 182R, and Cessna/Reims F182P & Q with O-470-A -L, -R, -S, and -U engine Basic Kit: Part Number: G 3F0 08 01 ST P ( O- 470- L , -R , - S e ng ine ) 1 3-Bladed Propeller: PHC-G3YF-1RF/F8068 1 Polished Spinner: D- 479 8-3 P ( 182 - 182 G) o r D-4 798 -1 P (1 82H- P) 1 STC Document Se t: SA02 82 1CH Part Number: G 3F0 05 04 STP ( O- 470-U engine ) 1 3-Bladed Propeller: HC-G 3 YF-1R F/F806 8 1 Polished Spinner: D- 479 8-1 P ( 182 Q, R ) 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 182 Applicable Models: 182 thru 182R and F182Q & R(O-470-L, -R, -S, -U) * Governor change may be required when replacing original steel hub Hartzell. Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 83 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: Hartzell 82XF- 82 inch diameter, 2-bladed steel hub propeller Diameter reduction allowable to 80 inches 1000 hour / 5 year TBO McCauley 2A36C - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1000-1500 hours/5 year TBO McCauley 2A34C - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1000-1500 hours/5 year TBO McCauley C66 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1200-1500 hours/5 year TBO McCauley C201 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80 inches 1500 hours/5 year TBO McCauley C203 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2000 hour / 6 year TBO McCauley C204 - 82 inch diameter 2-bladed propeller Diameter reduction allowable to 80.5 inches 2000 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades 4/20/11 MCT T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 185 thru 185E with IO-470-F engine Basic Kit: Part Number: C3F0 1904STP 1 3-Bladed Propeller: PHC-C3YF-1RF/F8068 1 Polished Spinner: C- 357 5- P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 185 (IO-470 powered) Applicable Models: 185 thru 185E (IO-470-F) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C33/C49/C48/C58 – 88 inch diameter 2- bladed propeller Diameter reduction allowable to 80.5 inches 1200-1500 hours/5 year TBO Oil fill requirement per AD 91-15-04 McCauley C230 – 88 inch diameter 2- bladed propeller Diameter reduction allowable to 80.5 inches 2400 hours/6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 206, 206A, TU206A – TU206F s/n U20602199, P206A, and TP206A (replacing C78, C79, C90 only) with IO-520-A or TSIO-520-C engine Basic Kit: Part Number: C3F0 7100STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F806 8 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 (IO-520 powered) Applicable Models: U206, U206A, TU206A – TU206F s/n U20602199, P206A, and TP206A (replacing C78, C79, C90 only). (IO-520-A or TSIO-520C) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C58 /C78 – 82 - 88 inch diameter 2-bladed prop Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C79 / C90 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 207, 207A with IO-520-F engine Basic Kit: Part Number: C3F0 7550STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F806 8- 2 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 207 (IO-520 powered) Applicable Models: 207, 207A (IO-520-F) Specifications: 80 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C58 – 82 inch diameter 2-bladed prop Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C90 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO McCauley C404 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2400 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna A185E & A185F with IO-520-D engine Basic Kit: Part Number: C3F0 7551STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F806 8- 2 1 Polished Spinner: C- 357 5- P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA A185 (IO-520 powered) Applicable Models: A185E, A185F (IO-520-D) Note: No engine mount change is required per the Hartzell STC paperwork. Changing to the heavier mounts, however, may be needed if vibration is experienced. Specifications: 80 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C58 - 86 inch diameter 2-bladed prop Diameter reduction allowable to 84.5 inches Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C403 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades MCT March 2011 T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna A185E, A185F With IO-520-D engine Basic Kit: (84” Diameter) Part Number: C3F00047STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F846 8A-2R – Gray b la des ( pic tur ed) 1 Polished Spinner: C- 357 5- P 1 STC Document Se t: SA02 52 8CH-D Basic Kit: (86” Diameter) Part Number: C3F00045STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F846 8AR( *1) – Black blades 1 Polished Spinner: C- 357 5- P 1 STC Document Se t: SA02 52 8CH-D __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 185 Applicable Models: A185E, A185F * Note: No engine mount change is required per the Hartzell STC paperwork. Changing to the heavier mounts, however, may be needed if vibration is experienced. **Note: STC paperwork only covers floats that were originally type certified on the aircraft. ***Note: This propeller should be especially effective for aircraft operating on floats, out of short fields, or with heavy loads. Specifications: 84 - 86 inch diameter 3-bladed, aluminum hub propeller 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 80 inches Maximum RPM on both propellers, 2700 RPM  84” No RPM restriction  Placard – “Continuous operation is prohibited above 26 inches MP between 2250 – 2450 RPM” (86” diameter only) Replaces: McCauley C58 - 86 inch diameter 2-bladed prop Diameter reduction allowable to 84.5 inches Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C403 - 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2000 hour / 6 year TBO Advantages: vs. McCauley C58 2-bladed model Better take-off performance Longer TBO Current design, Mc threaded design obsolete vs. McCauley C401 3-bladed model Better take-off performance Longer TBO vs. McCauley C403 3-bladed model Better take-off performance 8.2% decrease in time to accelerate to 50 KIAS Longer TBO T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna 206, P206(A), U206 – U206F & U206G through s/n U206004074, TP206A, TU206A – TU206E & TU206F through s/n U20602199 With IO-520-A, F, TSIO-520-C Basic Kit: (82” Diameter) Landplane Part Number: C3F00046STP 1 3-Bladed Propeller: HC-C 3Y F-1R F /F846 8A-4R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 75 2CH-D Basic Kit: (84” Diameter) Floatplane Part Number: C3F00042STP 1 3-Bladed Propeller: HC-C 3Y F-1R F /F846 8A-2R 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 75 2CH-D Basic Kit: (86” Diameter) Floatplane Part Number: C3F00043STP 1 3-Bladed Propeller: HC-C 3Y F-1R F /F846 8AR 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 75 2CH-D SEE PAGE 2 FOR EXPLIC IT ELIG IB ILITY AND LIMITATIONS __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 Applicable Models: Floatplane Props (84 – 86”) 206, P206(A), U206 – U206F & U206G through s/n U206004074, TP206A, TU206A – TU206E & TU206F through s/n U20602199. Landplane Prop (82”) 206, P206A, U206, U206A, TP206A, TU206A though TU206F though s/n 20602199. Note: Replaces short hub C58, C78, C79, C90, and C230 only. Specifications: 82 - 86 inch diameter 3-bladed, aluminum hub propeller 2400 hour / 6 year TBO 82.2/82.4/82.6 pounds (propeller and spinner) Two inch diameter reduction allowable Maximum RPM 2700 -TU206C, D, E and F using 86” (P)HC-C3YR-1RF/F8468AR are limited to 2690 RPM under this STC for noise certification -U206B through U206G using IO-520-F engine, take-off and max continuous RPM is limited to 2700 RPM - Placard (normally aspirated) “Continuous operation is prohibited above 26 inches MP between 2250 – 2450 RPM” (86” diameter only) -Placard (turbo-charged) “Continuous operation is prohibited above 28 inches MP between 2250 – 2450 RPM” (86” diameter only) -Placards do not apply to 82” or 84” diameter propellers Replaces: McCauley C58 / C78 – 82 - 88 inch diameter 2-bladed prop Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C79 / C90 - 80 inch diameter 3-bladed prop Oil fill requirement per AD 91-15-04 1500 hour / 6 year TBO Advantages: vs. McCauley C58 / C78 2-bladed model Better take-off performance Longer TBO Current design, Mc threaded design obsolete vs. McCauley C79 / C90 3-bladed model Better take-off performance 9.5% decrease in time to accelerate to 60 MIAS Longer TBO Current design, Mc threaded design obsolete Note: vs. all models - 3% decrease in engine out glide distance T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna P206, P206A (replacing C73, C88), P206B – P206E, TP206A (replacing C70, C77, C88), TP206B – TP206E, and TU206F (s/n U20602200 - U20603521) with IO-520-A or TSIO-520-C engine Basic Kit: Part Number: J3F0 0552STP 1 3-Bladed Propeller: HC-J 3YF-1R F/F806 8 1 Polished Spinner: C- 458 2-1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 (IO-520 powered) Applicable Models: P206, P206A(replacing C73, C88), P206B thru P206E, TP206A (replacing C70, C77, C88), TP206B, thru TP206E, and TU206F (s/n U20602200 – U20603521) . (IO-520-A, TSIO-520-C) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C70 / C73 82 inch diameter 2-bladed prop Diameter reduction allowable to 80.0 inches Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C77, C88 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.0 inches 1200 hour / 5 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna T207, T207A with TSIO-520-G, -M engine Basic Kit: Part Number: C3F0 7102STP 1 3-Bladed Propeller: HC-C 3YF-1R F/F806 8 1 Polished Spinner: A-2 295 -1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA T207 (TSIO-520 powered) Applicable Models: T207, T207A (TSIO-520-G, -M) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 82 pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C78 – 81.5 inch diameter 2-bladed prop Diameter reduction allowable to 80.5 inches Oil fill requirement per AD 91-15-04 1200-1500 hour / 5 year TBO McCauley C401 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2400 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades 08/14 KF T O P P R O P P E R F O R M A N C E C O N V E R S I O N S Cessna TU206G with TSIO-520-M engine Basic Kit: Part Number: J3F0 0551STP 1 3-Bladed Propeller: HC-J 3YF-1R F/F806 8 1 Polished Spinner: C- 458 2-1 P 1 STC Document Se t: SA02 82 1CH __________________________________________________________________________________________________ Aircraft Serial and registration numbers required when ordering All Prices FOB Hartzell Propeller Inc. Prices do not include Ohio State Sales Tax Installation and Dynamic Balancing available at an additional charge Telephone: (937) 778-5726 Option 2 / (800) 942-7767 Option 2 Fax: (937) 778-4215 Internet: www.hartzellprop.com Email: topprop@hartzellprop.com T O P P R O P P E R F O R M A N C E C O N V E R S I O N S CESSNA 206 (IO-520 powered) Applicable Models: TU206G (TSIO-520-M) Specifications: 82 inch dia 3-bladed, scimitar, aluminum hub prop 2400 hour / 6 year TBO 84.75pounds (propeller and spinner) Diameter reduction allowable to 78 inches Replaces: McCauley C402 80 inch diameter 3-bladed prop Diameter reduction allowable to 78.5 inches 2400 hour / 6 year TBO Advantages: Improved take-off and climb performance Dramatic noise reduction Longer TBO Improved appearance Latest hub design and “blended airfoil”, Scimitar blades