Cessna T182 Turbo Skylane — Avionics Manual
1 avionics manual reference for the Cessna T182 Turbo Skylane.
The SkyView HDX Autopilot Servo Installation & Maintenance Manual is designed for the installation and maintenance of SkyView autopilot servos in Cessna 182 series airplanes. It includes detailed instructions for installation, compliance with airworthiness limitations, and maintenance procedures. The manual is intended for FAA-certified Airframe and Powerplant Technicians and assumes a basic understanding of aircraft systems and maintenance practices. It provides guidance on verifying control cable specifications, installing servos, and troubleshooting common issues. The document also emphasizes the importance of following FAA regulations and using the correct tools and materials during installation.
- This manual is specifically for the Cessna 182 series, not the Cessna 337G.
- Installers must verify control cable specifications before connecting the autopilot system.
- The installation must comply with FAA regulations, including submitting Form 337 for major alterations.
- Use the correct tools as specified in the installation section, such as angle drills and swage compression tools.
- Follow the detailed installation steps to ensure proper positioning and securing of servos.