Cirrus SR22T G6 — Checklist

This document is a prebuy examination checklist specifically designed for the Cirrus SR22T G6. It is divided into two phases, with Phase 1 focusing on operational checks and engine inspections, while Phase 2 covers landing gear, cabin, and airframe assessments. The checklist is intended for use by maintenance personnel or pilots preparing to purchase an aircraft, ensuring that all critical components are thoroughly inspected before the transaction. The document emphasizes the importance of reporting findings after Phase 1 before proceeding to Phase 2, highlighting any significant issues that may arise during the examination.

• Estimated labor hours: 8 hours for normally aspirated, 10 hours for turbocharged airplanes.
• Check cylinder compressions hot; report readings and leakage locations.
• Inspect for cracks in cylinder heads and report findings with photographs.
• Verify compliance with airworthiness directives and service bulletins during maintenance record checks.
• Ensure proper operation of all avionics and interior lights.