Skip to main content

Systems Description for the Diamond DA40 Diamond Star

Diamond DA40 Diamond Star · Systems Description

Free account — keep the POHs & checklists you reference in one place.

Overview

This document serves as a Systems Description for the Diamond DA40D 180 Star, specifically detailing components related to the exhaust system and engine mounts. It includes part numbers and descriptions for various components such as mufflers, risers, and shrouds associated with the Lycoming IO 360 engine. The document is intended for maintenance personnel and technicians who require detailed information for servicing and inspecting the exhaust system of the DA40D. It emphasizes the importance of proper installation and inspection to ensure the serviceability of the exhaust components.

  • Part number D40-7 refers to the muffler for the Diamond DA40D.
  • Inspect the muffler for blisters or bulges under the heat shroud.
  • Inner flame tubes must be attached for the muffler to be serviceable.
  • Part numbers DA40-1 to DA40-4 correspond to risers for each cylinder of the engine.
  • The document is intended for maintenance personnel working on the DA40D.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

Document

Source

Copy found at www.acornwelding.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

Report a problem or request removal

Document details

Type
·
Systems Description
Year
·
2010
Pages
·
1
File size
·
119 KB
Copy found at
·
www.acornwelding.com
About this document
What is the Systems Description for the Diamond DA40 Diamond Star?

The Systems Description for the Diamond DA40 Diamond Star is a systems description for the Diamond DA40 Diamond Star, dated 2010.

How many pages is the Systems Description for the Diamond DA40 Diamond Star?

The copy of the Systems Description for the Diamond DA40 Diamond Star on file runs 1 pages.

What year was the Systems Description for the Diamond DA40 Diamond Star published?

The Systems Description for the Diamond DA40 Diamond Star — the Diamond DA40 Diamond Star systems description on file — is dated 2010.

Documentation completeness
2/7

Most owners only have the POH. Here's the essential set for the Diamond DA40 Diamond Star.

More Diamond DA40 Diamond Starmanuals & documents

In this document

Exhaust System Components

The document lists several key components of the exhaust system for the Diamond DA40D, including the muffler (part number D40-7) and various risers for each cylinder (part numbers DA40-1 through DA40-4). It also includes a connection tube (D40-8) and shrouds for heat exchangers. Each part is essential for the proper functioning of the engine exhaust system.

Inspection Procedures

Maintenance personnel are advised to inspect the muffler for any blisters or bulges under the heat shroud, which could indicate damage or failure. Additionally, it is noted that inner flame tubes must be attached for the muffler to be considered serviceable, highlighting the importance of thorough inspections during maintenance.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Safety notes

  • Ensure all components are properly installed to avoid exhaust leaks.
  • Regular inspections are critical for maintaining engine performance.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Full document text

Exhaust Systems Engine Mounts Carb Air Boxes Shrouds Seats Piston Turbine Radial Vintage And More... L E L N E C C E X E Diamond DA 40D 180 Star With IO 360 Lycoming Engine Item Part Number Description Item Part Number Description 1 2 3 4 5 6 7 - 8 D40-7 MUFFLER DA40-1 A RISER CYL #1 DA40-2 A RISER CYL #2 DA40-3 A RISER CYL #3 DA40-4 A RISER CYL #4 DA40-8 CONNECTION TUBE D40-4 SHROUD, HEAT EXCHANGER D41-7806-50-01 INSIDE SHROUD A169-14 CLAMP Inner flame tubes must be attached for the muffler to be serviceable. Inspect muffler for blisters or bulges under heat shroud. 1 2 3 4 5 7 6 6 6 8 8 8 8 (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com ©2010 Acorn Welding Ltd.