DOUGLAS DC-3 — Checklist
1 checklist reference for the DOUGLAS DC-3.
Overview
DOUGLAS DC-3/R4D CHECKLISTS
This document is a condensed checklist for the Douglas DC-3/R4D aircraft, detailing procedures for various phases of flight including pre-start, taxi, takeoff, landing, and post-landing operations. It includes specific instructions for engine start, cruise settings, and safety checks.
- Battery and generator switches must be ON before starting engines.
- Cruise RPM settings range from 1700 to 2250 RPM depending on desired performance.
- Landing gear must be down and latched before landing.
- Flaps should be set as desired before takeoff.
- Pitot heat and carburetor heat should be used as needed.
- Fuel boost pumps should be ON during takeoff and landing.
- Engine run-up checks are required before taxiing.
- Parking brake must be ON during engine start.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
1 document
