Mooney M20TN Acclaim Type S — Maintenance Manual
1 maintenance manual reference for the Mooney M20TN Acclaim Type S.
Overview
SERVICE BULLETIN M20-311 · 2010
This service bulletin, M20-311, addresses a specific issue with the Exhaust Gas Temperature (EGT) probe mounting on Mooney M20TN Acclaim and Type-S aircraft. The bulletin is intended for aircraft owners and maintenance personnel, detailing necessary inspections and corrective actions due to reports of oversized EGT probe mounting holes in cylinders #1 and #2. Compliance is required within the next 10 flight hours, and the document provides step-by-step instructions for the inspection and installation of new sealing washers. It also includes a compliance card that must be returned to Mooney Airplane Company after the work is completed.
- Compliance is required within the next 10 flight hours.
- Inspect and replace EGT probes if mounting holes are oversized.
- Torque clamps to 30-35 in.lbs. during installation.
- Use sealing washer P/N 900006-1 for EGT probe installation.
- Complete a logbook entry after compliance.
1 document