PIPER Tri-Pacer with Lycoming O290, O320 Engine
Piper PA-22 Colt · Systems Description
Overview
This document serves as a parts catalog for the Piper PA-22 Colt and PA-20 Pacer aircraft, specifically detailing components compatible with various Lycoming engines including the O235, O290, and O320. It provides a comprehensive list of parts, including mufflers, carburetor heat shrouds, engine mounts, and fuel tanks, along with their respective part numbers. The catalog is intended for maintenance personnel and aircraft owners who need to identify and procure parts for these aircraft models. It includes information on inspection intervals for critical components, ensuring safety and compliance with maintenance standards.
- Part numbers for various components are provided, including exhaust systems and engine mounts.
- Regular inspections of the exhaust system are critical, with specific intervals based on total flight hours.
- The document covers parts for both the Piper PA-22 Colt and PA-20 Pacer, ensuring compatibility for maintenance.
- Inspection of the muffler requires checking for inner flame tubes and overall integrity.
- Carburetor air boxes are detailed with multiple configurations to suit different engine setups.
Document
Source
Originally published by www.acornwelding.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Systems Description
- Year
- 2010
- Pages
- 1
- File size
- 146 KB
- Publisher
- www.acornwelding.com
Most owners only have the POH. Here's the essential set for the Piper PA-22 Colt.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
More Piper PA-22 Coltmanuals & documents
See all 13 →- Airworthiness Directive ScheduleAirworthiness Directives
- SERVICE LETTER NO. 1302Checklist
- Project Materials ListSystems Description
- Type Acceptance ReportOther Documents
- AAIB Bulletin: 9/2013Other Documents
- SERVICE BULLETIN No. 819Service Bulletins
- Tri-PacerPerformance Data
- Piper Aircraft Corporation Parts CatalogWeight And Balance
- Airworthiness Directive 281/64Airworthiness Directives
- Airplane Flight Manual for the Piper PA-22 ColtFlight Manual
- AILERON - RUDDER INTERCONNECT REMOVALType Certificate
- Piper Service Letters, Bulletins, Memos and AidsWeight And Balance
In this document
Exhaust Systems
The catalog includes detailed parts for the exhaust systems of the PA-22 Colt and PA-20 Pacer, such as mufflers and shrouds. Specific part numbers are provided for various configurations, including those with and without rear heaters. Regular inspections are recommended to ensure the integrity of these components.
Engine Mounts
Information on engine mounts for the PA-22 Colt is included, with part numbers for different configurations. The document specifies the compatibility of mounts with various engine types, ensuring that maintenance personnel can select the correct parts for repairs or replacements.
Carburetor Air Boxes
The catalog lists several carburetor air box configurations for the PA-22 Colt, detailing part numbers and specifications. This section is crucial for ensuring proper air intake and engine performance.
Inspection Guidelines
The document outlines inspection guidelines for the exhaust system, recommending checks every 100 hours for aircraft with less than 950 hours of operation, and every 50 hours for those exceeding 950 hours. Specific areas to inspect include the muffler, shroud, and Y-joint for signs of wear or damage.
Safety notes
- Inspect exhaust system for cracks, corrosion, heat damage, or weld separations.
- Muffler must have inner flame tubes still attached to be serviceable.
Full document text
PIPER Tri-Pacer with Lycoming O290, O320 Engine PA-22 Colt & PA-20 Pacer with Lycoming O235 Engine Usable on Codes A: PA 22 Colt and PA 20 Pacer With Lycoming O235 engine B: PA-22 with 125HP w/o rear heater installed C: PA-22 with 125HP with rear heater installed D: PA-22 with 150HP & 160HP engine, All PA-20 E: PA-22 SN 22-1760-2377 & SN 2379-2424 F: PA-22 with 135HP with rear heater installed G: PA-22 with 135HP w/o rear heater installed H: PA-22 with 125HP & 135HP With rear heater installed I: PA-22 SN 3387 and on, PA-22 Colt - - Code A A C B H D E F I Item Part Number Description 1 2 3 3 4 4 5 6 7 8 9 10 - - - - - - - - - - - - - - - - - - 10308- 03 MUFFLER 12742- 04 MUFFLER SHROUD 12043-023 STACK ASSY FRONT 12043-029 STACK ASSY FRONT 12043-022 STACK ASSY REAR 12043-027 STACK ASSY REAR 13238-005 STACK REAR WITH REAR HEATER 10843-003 CARB HEAT SHROUD UPPER 10764-003 CARB HEAT SHROUD LOWER 11417-002 TAILPIPE 14235-000 CLAMP MUFFLER & TAILPIPE 10430-000 SHROUD CLIP 77611 GASKET 11950-005 CARB AIR BOX 12746-004 CARB AIR BOX 11950-007 CARB AIR BOX 14253-004 CARB AIR BOX 14253-003 CARB AIR BOX 13765-004 CARB AIR BOX 13765-005 CARB AIR BOX 13034-000 ENGINE MOUNT NOSE GEAR 11786-000 ENGINE MOUNT 11786-013 ENGINE MOUNT 11786-012 ENGINE MOUNT 11786-014 ENGINE MOUNT 11786-015 ENGINE MOUNT STC-SA181RM ENGINE MOUNT O360 ENGINE VARIOUS SEAT BASE 10849-034 FUEL TANK LEFT HAND 10849-033 FUEL TANK RIGHT HAND 10308- 03 MUFFLER 12742- 04 MUFFLER SHROUD 12043-023 STACK ASSY FRONT 12043-029 STACK ASSY FRONT 12043-022 STACK ASSY REAR 12043-027 STACK ASSY REAR 13238-005 STACK REAR WITH REAR HEATER 10843-003 CARB HEAT SHROUD UPPER 10764-003 CARB HEAT SHROUD LOWER 11417-002 TAILPIPE 14235-000 CLAMP MUFFLER & TAILPIPE 10430-000 SHROUD CLIP 77611 GASKET 11950-005 CARB AIR BOX 12746-004 CARB AIR BOX 11950-007 CARB AIR BOX 14253-004 CARB AIR BOX 14253-003 CARB AIR BOX 13765-004 CARB AIR BOX 13765-005 CARB AIR BOX 13034-000 ENGINE MOUNT NOSE GEAR 11786-000 ENGINE MOUNT 11786-013 ENGINE MOUNT 11786-012 ENGINE MOUNT 11786-014 ENGINE MOUNT 11786-015 ENGINE MOUNT STC-SA181RM ENGINE MOUNT O360 ENGINE VARIOUS SEAT BASE 10849-034 FUEL TANK LEFT HAND 10849-033 FUEL TANK RIGHT HAND 0 0 PA 20 - 115HP 125HP PA 20 - 125HP 135HP PA 22 SN - 1 353 PA 22 SN - 354 3386 AD 68-05-01 Inspect exhaust system for cracks, corrosion, heat damage or weld separations. Less than 950 hrs of operation inspect every 100 hrs. More than 950 hrs of operation inspect every 50 hrs. Repair or replace if defects found. The muffler must have inner flame tubes still attached to be serviceable. Inspect wear areas on the aluminum shroud at shroud ring areas. Inspect the Y-joint at the aft cylinder stack for cracks. This part has a hot area at the elbow. Inspect this area for black flaking metal and bulges. 1 2 3 4 6 7 8 9 10 5 9 Exhaust Systems Engine Mounts Carb Air Boxes Shrouds Seats Piston Turbine Radial Vintage And More... L E L N E C C E X E (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com ©2010 Acorn Welding Ltd.