Piper PA-32 6X / 6XT — Specifications

This service letter, numbered 1327G, addresses the wing walk modification and inspection for specific Piper aircraft models, including the Piper 6X and 6XT. It supersedes the previous service letter (1327F) and includes updated compliance information regarding the inspection and modification of the wing walk area. The document is intended for aircraft maintenance personnel and owners to ensure compliance with safety standards and to facilitate inspections for potential cracks in the wing skin pan. The letter outlines the necessary steps for initial and recurring inspections, as well as modifications required if cracks are found.

• Models affected include PA-32-301FT Piper 6X and PA-32-301XTC Piper 6XT.
• Initial compliance with inspection must occur within the next 50 hours of service.
• Recurring inspections are required every 50 hours thereafter.
• If cracks are found, a modification involving removal of wing walk material and installation of safety tape is necessary.
• Use 3M Safety-Walk Clear Wingwalk Tape for modifications.