Piper PA-34 Seneca V — Flight Manual

The SkyView HDX Autopilot Servo Installation & Maintenance Manual is designed for the Piper PA-34 Seneca series, specifically covering models PA-34-200T Seneca II, PA-34-220T Seneca III, IV, and V. This manual provides detailed instructions for the installation and maintenance of the SkyView HDX autopilot servos and associated bracketry. It includes critical information for ensuring compliance with airworthiness standards as outlined by the FAA. The intended audience for this manual includes FAA-certified Airframe and Powerplant Technicians who are responsible for the installation and maintenance of the autopilot systems in these aircraft. The document emphasizes the importance of following regulatory requirements and provides guidelines for proper installation procedures, ensuring that the autopilot system functions correctly and safely.

• The manual is for the Piper PA-34 Seneca series, including models II, III, IV, and V.
• Installers must verify control cable diameter as 1/8" before installation.
• Airworthiness limitations must be adhered to as per FAA regulations.
• Installation compliance requires submission of FAA Form 337 after installation.
• Materials for installation include specific Dynon part numbers and quantities.