Piper PA-34 Seneca V — Maintenance Manual

The SkyView Autopilot Servo Installation & Maintenance Manual provides comprehensive instructions for the installation and maintenance of the SkyView HDX Autopilot servos specifically designed for the Piper PA-34 Seneca series aircraft. This manual is essential for technicians and mechanics involved in the installation of autopilot systems in these aircraft models. It covers various aspects including pre-installation checks, installation compliance, control cable verification, and detailed procedures for both roll and pitch servo installations. The manual emphasizes the importance of adhering to FAA regulations and ensuring that all components are properly installed to maintain airworthiness. Additionally, it includes troubleshooting tips and maintenance procedures to ensure optimal performance of the autopilot system.

• The manual is for the Piper PA-34 Seneca series, including models II, III, IV, and V.
• Control cables must be verified to be 1/8" diameter as per MIL-DTL-83420 specifications.
• Installers must complete FAA Form 337 for major repairs or alterations before returning the aircraft to service.
• The roll servo is located on the left side of the cabin, while the pitch servo is on the right side.
• All installation procedures must comply with FAA regulations and Dynon guidelines.