PIPER PA-36-300 Pawnee Brave with Lycoming IO540 Engine
Piper PA-36 Pawnee Brave · Systems Description
Overview
This document serves as a parts catalog for the Piper PA-36-300 Pawnee Brave, specifically detailing components compatible with the aircraft's Lycoming IO540 engine. It includes part numbers and descriptions for various engine and airframe components, ensuring that maintenance personnel and operators can identify and procure the necessary parts for repairs and upkeep. The catalog is essential for maintaining the aircraft's performance and safety, providing a clear reference for the specific parts required for the PA-36-300 model. Additionally, it outlines inspection requirements related to the engine mount and other critical components, emphasizing the importance of regular maintenance checks.
- Part numbers for critical components are provided, including 764-335 for the right hand stack and 76906-002 for the induction air box.
- Regular inspections of the engine mount are required every 100 hours of operation until gussets are installed.
- The inspection applies to specific serial numbers ranging from 36-7760001 to 36-8160023.
Document
Source
Originally published by www.acornwelding.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Systems Description
- Year
- 2010
- Pages
- 1
- File size
- 125 KB
- Publisher
- www.acornwelding.com
Most owners only have the POH. Here's the essential set for the Piper PA-36 Pawnee Brave.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
More Piper PA-36 Pawnee Bravemanuals & documents
See all 14 →- CUSTOMER SERVICE OWNER PUBLICATIONS CATALOGPilot's Operating Handbook
- DESIGN OF AGRICULTURE AIRCRAFT WITH SPRAYING MECHANISMPilot's Operating Handbook
- Pawnee Brave 20cc Instruction ManualChecklist
- REFERENCE ENCYCLOPEDIA OF THE AMERICAN INDIANSupplemental Type Certificate
- Pawnee Brave 20cc Instruction ManualPilot's Operating Handbook
- Airworthiness Directives; Piper Aircraft, Inc. AirplanesService Bulletins
- ATSB Transport Safety Report: Aviation Occurrence Investigation (Short) AO-2019-043Other Documents
- Type Acceptance Report TAR 19/21B/27 – Piper PA-36 Pawnee BravePilot's Operating Handbook
- Special Report: Colorado Firefighting Air CorpsOther Documents
- HARTZELL PROPELLER INC. SERVICE BULLETIN HC-SB-61-227 Propeller - Hub InspectionWeight And Balance
- SCHEDULE OF AIRWORTHINESS DIRECTIVESAirworthiness Directives
- Pilot's Operating HandbookPilot's Operating Handbook
In this document
Parts List
The document includes a detailed parts list for the Piper PA-36-300 Pawnee Brave, featuring part numbers and descriptions for various components such as the right and left hand stacks, induction air box, engine mount, and shock mount. This section is crucial for identifying the correct parts needed for repairs.
Inspection Requirements
It specifies inspection requirements for the engine mount, indicating that it should be checked for cracks at each attach point every 100 hours of operation until gussets are installed as per Piper Service Bulletin 828. This ensures the structural integrity of the engine mount.
Applicable Serial Numbers
The document notes that the inspection requirements apply to serial numbers 36-7760001 through 36-8160023, providing clarity on which aircraft are affected by the outlined maintenance procedures.
Safety notes
- Inspect engine mount for cracks at each attach point; if cracks are found, install gussets as per Piper SB 828.
- Inspect the Y-joint at the aft cylinder stack for cracks.
Full document text
PIPER PA-36-300 Pawnee Brave with Lycoming IO540 Engine Item Part Number Description 764-335 STACK RIGHT HAND 764-336 STACK LEFT HAND 76907- 16 FLANGE ASSY 77611 GASKET 76906-002 INDUCTION AIR BOX 39040-000 ENGINE MOUNT J-3804-31 SHOCK MOUNT VARIOUS SEAT BASE 764-335 STACK RIGHT HAND 764-336 STACK LEFT HAND 76907- 16 FLANGE ASSY 77611 GASKET 76906-002 INDUCTION AIR BOX 39040-000 ENGINE MOUNT J-3804-31 SHOCK MOUNT VARIOUS SEAT BASE 0 1 2 3 NA - - - - 2 3 1 3 AD 92-15-15 Applies to S/N’s 36-7760001 thru 36-8160023. Inspect engine mount for cracks at each attach point, if cracks found install gussets as per Piper SB 828. Inspection required every 100 hrs of operation till gussets installed. Inspect the Y-joint at the aft cylinder stack for cracks. Inspect flow divider in tail pipe. Exhaust Systems Engine Mounts Carb Air Boxes Shrouds Seats Piston Turbine Radial Vintage And More... L E L N E C C E X E (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com ©2010 Acorn Welding Ltd.