Robinson R44 Clipper — Checklist

4 checklist references for the Robinson R44 Clipper.

Overview

R44 Raven Internal Check-list · 2021

This document is a checklist for the Robinson R44 series helicopters, specifically tailored for the R44 Raven model. It provides a comprehensive guide for pilots to ensure all necessary pre-flight, in-flight, and post-flight procedures are followed. The checklist includes critical checks for fuel, engine start, power checks, take-off, and shutdown procedures. It is designed to enhance safety and operational efficiency by ensuring that all systems are checked and verified before and after flight. The checklist is based on the R44 Pilot Operating Handbook (POH) and is FAA approved as of November 17, 2021.

Fuel should be sufficient for the flight plus 10% reserve and at least 20 minutes remaining after landing.
Mag drop at 75% RPM should not exceed 7% in 2 seconds during power checks.
Oil pressure must be at least 25 psi within 30 seconds after starting the engine.
RPM should stabilize at 101-102% during take-off checks.
All avionics and systems must be turned off after applying the rotor brake during shutdown.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

4 documents