F.8L Falco Landing Gear Motor

Sequoia F-8L Falco · Parts Catalog

Free account — keep the POHs & checklists you reference in one place.

Overview

This document is a parts catalog for the Sequoia F-8L Falco aircraft, detailing the components of the landing gear motor assembly. It includes part numbers, descriptions, and installation references for various assemblies and components used in the aircraft's landing gear system.

Includes parts for Model A and Model B landing gear motors.
Lists multiple assemblies such as the landing gear motor assembly and idler gear assembly.
Specifies materials for components, including aluminum and steel.
Provides part numbers for each component.
Indicates that one of each part is required per aircraft.
Includes installation references to specific drawings.
Mentions the use of specific grease for lubrication.
Details the specifications for various gears and pinions.

Document

Source

Originally published by openclip.net. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

View original at openclip.net

Report a problem or request removal

Document details

Type: Parts Catalog
Year: 2018
File size: 2.0 MB
Publisher: openclip.net
Language: en

About this document

What is the F.8L Falco Landing Gear Motor?

The F.8L Falco Landing Gear Motor is a parts catalog for the Sequoia F-8L Falco, dated 2018.

Where does the F.8L Falco Landing Gear Motor come from?

This copy of the F.8L Falco Landing Gear Motor was originally published by openclip.net and is hosted on Sprinkle as a free, searchable reference copy.

What year was the F.8L Falco Landing Gear Motor published?

The F.8L Falco Landing Gear Motor — the Sequoia F-8L Falco parts catalog on file — is dated 2018.

Documentation completeness

4/7

Most owners only have the POH. Here's the essential set for the Sequoia F-8L Falco.

Pilot's Operating Handbook / AFM
Checklist
Maintenance Manual
Parts Catalog (IPC)
Systems & Wiring
Service Bulletins on file
Type Certificate (TCDS)

More Sequoia F-8L Falcomanuals & documents

In this document

Landing Gear Motor Assembly

Describes the landing gear motor assembly for Model A and Model B, including part numbers and installation references.

Idler Gear Assembly

Details the idler gear assembly, including part number and installation reference.

Change Gear Assembly

Outlines the change gear assembly for Model A and Model B, including part numbers and installation references.

Upper and Lower Housing

Specifies the upper and lower housing components, including materials and installation references.

Shaft and Bearings

Describes the shaft and bearing components, including materials and installation references.

Engagement Unit Assembly

Details the engagement unit assembly, including part numbers and installation references.

Full document text

F.8L Falco Landing Gear Motor S 6/19/2018 No. 530-1 Landing Gear Motor Assembly (7 Second) No. 530-7 Idler Gear Assembly No. 530-8 Change Gear Assembly No. 530-9 Upper Housing No. 530-10 Lower Housing No. 530-17 Change Gear Pinion No. 530-19 Shaft No. 530-1B Landing Gear Motor Assembly (13 Second) No. 530-2 Engagement Unit Assembly No. 530-3 Upper Housing Assembly No. 530-4 Lower Housing Assembly No. 530-5 Motor Assembly No. 530-6 Gear & Spider Assembly No. 530-7B Change Gear Assembly No. 530-8B Change Gear Assembly No. 530-9B Upper Housing No. 530-10B Lower Housing No. 530-11 Pinion Assembly No. 530-12 Pinion No. 530-13 Gear & Spider No. 530-14 Engagement Knob No. 530-15 Gear No. 530-16 Spur Gear No. 530-17B Change Gear Pinion No. 530-18 Shaft No. 530-19B Change Gear Pinion No. 530-20 Bearing No. 530-21 Bearing No. 530-22 Bearing No. 530-23 Motor No. 530-24 Key Model A Landing Gear Motor 7 Second NO. 530-1 LANDING GEAR MOTOR ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE for Model A (7 second) 1:7.031 ratio total P/N 530-8 P/N 530-2 P/N 530-4 P/N 530-7 P/N 530-5 AN525-832R12 AN315-3R(2) MS35338-43 (2) grease with MIL-G-23827B grease (Aeroshell 7) DRAWING NUMBER 530-1 SCALE DATE Sequoia Aircraft Corporation TITLE 7-8-84 FULL Landing Gear Motor Assembly see drawing No. 530-1 for installation NO. 530-7 IDLER GEAR ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE DRAWING NUMBER 530-7 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL IDLER GEAR ASSEMBLY FOR MODEL A P/N 530-16 P/N 530-19 see drawing No. 530-1 for installation NO. 530-8 CHANGE GEAR ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE DRAWING NUMBER 530-8 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL CHANGE GEAR ASSEMBLY FOR MODEL A P/N 530-16 P/N 530-17 NO. 530-9 UPPER HOUSING ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-3 for installation material: 6061-T6 or 2024-T4 aluminum alodine DRAWING NUMBER 530-9 SCALE DATE Sequoia Aircraft Corporation TITLE 7-8-84 FULL UPPER HOUSING FOR MODEL A NO. 530-10 LOWER HOUSING ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-4 for installation material: 6061-T6 or 2024-T4 aluminum alodine DRAWING NUMBER 530-10 SCALE DATE Sequoia Aircraft Corporation TITLE 7-8-84 FULL LOWER HOUSING FOR MODEL A NO. 530-17 CHANGE GEAR PINION ONE REQUIRED PER AIRCRAFT FULL SCALE make from: Boston Gear No. 37006 pinion wire see drawing No. 530-8 for installation Boston Gear No. 37006 Pinion Wire Pressure Angle 14-1/2° Diametral Pitch 24 Material steel Teeth 16 Pitch Diameter 0.667” .320" .250" DRAWING NUMBER 530-17 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL CHANGE GEAR PINION FOR MODEL A & C .375" Ø (press fit into P/N 530-16) .2500" .2495" Ø .2500" .2495" Ø .295" .313" 1.178" NO. 530-19 SHAFT ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-7 for installation material: 4130 or 4140 steel heat treat to 125,000 psi DRAWING NUMBER 530-19 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL SHAFT FOR MODEL A 1.178" .633" .545" .250" .063" .44" Ø .38" Ø press fit into P/N 530-16 (.3755") 0.2500" 0.2495" Ø 0.2500" 0.2495" Ø Model B Landing Gear Motor 13 Second AN525-832R12 (2) AN315-3R(2) MS35338-43 (2) P/N 530-8B P/N 530-5 NO. 530-1B LANDING GEAR MOTOR ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE P/N 530-7B P/N 530-2 1:13.184 ratio P/N 530-4A 40 teeth to 50 teeth 40:50 = 1.250 grease with MIL-G-23827B grease (Aeroshell 7) DRAWING NUMBER 530-1B SCALE DATE Sequoia Aircraft Corporation TITLE 7-4-87 FULL LANDING GEAR MOTOR ASSY FOR MODEL B (13 SECOND) NO. 530-2 ENGAGEMENT UNIT ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-1 for installation P/N530-14 Lee Spring LC-023AB-3MW 3/16" Ø x 3/4" roll pin 5/32" Ø steel balls (2), chrome plated P/N530-6 P/N530-18 P/N530-15 3/16" Øs x 5/8" roll pin (not sure of P/N - check) P/N530-3 or P/N 530-3B or P/N 530-3C DRAWING NUMBER 530-2 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL ENGAGEMENT UNIT ASSY FOR MODEL A,B,C NO. 530-3 UPPER HOUSING ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-2 for installation P/N530-9 or P/N 530-9B or P/N 530-9C P/N530-20 Torrington M-451 Needle Bearing 2 required for model A,B 1 required for model C DRAWING NUMBER 530-3 SCALE DATE Sequoia Aircraft Corporation TITLE 7-8-84 FULL UPPER HOUSING ASSEMBLY FOR MODEL: A, B, C Torrington M-451 Needle Bearing 2 required for model A,B 1 required for model C P/N530-10 or P/N 530-10B or P/N 530-10C NO. 530-4 LOWER HOUSING ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-1 for installation 1/8" Ø x 1/2" dowel pin (2) flush inside .19" P/N 530-22 DRAWING NUMBER 730-4 SCALE DATE Sequoia Aircraft Corporation TITLE 7-8-84 FULL LOWER HOUSING ASSEMBLY FOR MODEL A,B,C P/N 530-23 motor P/N 530-11 Pinion Gear Assembly NO. 530-5 MOTOR ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-1 for installation .65" DRAWING NUMBER 530-5 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL MOTOR ASSEMBLY FOR MODEL A,B, C NO. 530-6 GEAR & SPIDER ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-2 for installation DRAWING NUMBER 530-6 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL GEAR & SPIDER ASSEMBLY FOR MODEL A,B,C P/N530-13 P/N530-21 NO. 530-7B CHANGE GEAR ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-1B for installation DRAWING NUMBER 530-7B SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-87 FULL CHANGE GEAR ASSEMBLY FOR MODEL B P/N530-16 P/N530-19B NO. 530-8B CHANGE GEAR ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-1B for installation DRAWING NUMBER 530-8B SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-87 FULL CHANGE GEAR ASSEMBLY FOR MODEL B P/N 530-17B P/N 530-16 .75" Ø 1.350" 1.350" 1.000" 1.000" 1.7546" .375" 1.54" 1.54" 1.1593" .413" .413" .660" .0919" 1.00" R .69" Ø .69" Ø (2 places .26" R .19" R (typ) .125"Ø slip fit (.0005" over)

Show full text

(2 places) .5005" .5000" Ø 2.160" material: 6061-T6 or 2024-T4 aluminum alodine see Drawing No. 530-3 for installation NO. 530-9B UPPER HOUSING ONE REQUIRED PER AIRCRAFT FULL SCALE 1.450" 1.25" R .188" Ø (2 places) .166" Ø (2 places) 0.4380" 0.4370" Ø (2 places) 1.00" R .657" .470" .125" .345" .19" R .06" R .06" R (typ) .25" DRAWING NUMBER 530-9B SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-87 FULL UPPER HOUSING FOR MODEL B (+.313") ??? .75" .75" .75" Ø material: 6061-T6 or 2024-T4 aluminum alodine see Drawing No. 530-4 for installation NO. 530-10B LOWER HOUSING ONE REQUIRED PER AIRCRAFT FULL SCALE .800" 2.160" 1.350" 1.350" 1.150" 1.150" 1.000" 1.000" 1.7546" .375" 1.54" 1.54" .994" 1.1593" .413" .413" .660" .0919" 1.450" .38" .38" .38" .38" .250" .38" VIEW A-A FULL SCALE 1.00" R tap 8-32 .76" Ø .69" Ø .69" Ø .625" 2.625" Ø .312" .125" 1.25" R .381" .488" .263" R .19" R (typ) .125"Ø press fit (.0005" under) (2 places) .125" .19" R .06" R (typ) .188" Ø (4 places) .5005" .5000" Ø .4380" .4370" Ø (2 places) 1.44" R DRAWING NUMBER 530-10B SCALE DATE Sequoia Aircraft Corporation TITLE 7-4-87 FULL LOWER HOUSING FOR MODEL B .040" .068" 1.034" (ref) A A NO. 530-11 PINION ASSEMBLY ONE REQUIRED PER AIRCRAFT FULL SCALE see drawing No. 530-5 for installation P/N 530-24 silver solder or Loctite in place P/N 530-12 DRAWING NUMBER 530-11 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL PINION ASSEMBLY FOR MODEL A,B,C Boston Gear No. 09602 Pressure Angle 14-1/2° Diametral Pitch 24 Face 1/4” Material steel Teeth 16 Pitch Diameter 0.667” Bore 5/16” Hub 35/64” Ø Hub Projection 5/16” NO. 530-12 PINION ONE REQUIRED PER AIRCRAFT FULL SCALE make from: Boston Gear No. 09602 see drawing No. 530-11 for installation .094" .180" .180" .225" .094" DRAWING NUMBER 530-12 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL PINION FOR MODEL A, B, C Boston Gear No. 09694 Pressure Angle 14-1/2° Diametral Pitch 20 Face 3/8” Material steel Teeth 40 Pitch Diameter 2.000” Bore 3/8” Hub 1-23/32” Ø Hub Projection 1/2” NO. 530-13 GEAR & SPIDER ONE REQUIRED PER AIRCRAFT FULL SCALE make from: Boston Gear No. 09694 see drawing No. 530-6 for installation cadmium chromate plate .56" Ø 0.5005" 0.5000" Ø DRAWING NUMBER 530-13 SCALE DATE Sequoia Aircraft Corporation TITLE 7-2-84 FULL GEAR & SPIDER FOR MODEL A, B, C 1.75" Ø 1.75" Ø .81" R 20° 1.25" Ø .38" (ref) .19" .085" .69" Ø .06" R (typ) .19" R (typ) .06" .014" NO. 530-14 ENGAGEMENT KNOB ONE REQUIRED PER AIRCRAFT FULL SCALE material: 4130 or 4140 steel heat treat to 125,000 psi cadmium chromate plate see Drawing No. 530-2 for installation DETAIL A SCALE: 5:1 DRAWING NUMBER 530-14 SCALE DATE Sequoia Aircraft Corporation TITLE 6-29-84 FULL ENGAGEMENT KNOB FOR MODEL A, B, C 20° 1.150" .188" .75" Ø 4.0" R .16" R 10° .06" R see Detail A .080" 1.026" .250" .869" 1.25" Ø .56" Ø knurl chamfer .06" x 45° .098" R .085" .241" .188" .5005" .5000" Ø chamfer .03" x 45° .078" R .078" R .580"Ø DRAWING NUMBER 530-15 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL GEAR FOR MODEL A, B, C Boston Gear No. 09618 Pressure Angle 14-1/2° Diametral Pitch 24 Face 1/4” Material steel Teeth 48 Pitch Diameter 2.000” Bore 3/8” Hub 1-1/4” Ø Hub Projection 3/8” NO. 530-15 GEAR ONE REQUIRED PER AIRCRAFT FULL SCALE make from: Boston Gear No. 09618 see drawing No. 530-2 for installation 1.75" Ø 1.19" Ø .44" Ø .62" Ø .08" (typ) .06" R (typ) DRAWING NUMBER 530-16 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL SPUR GEAR FOR MODEL A, B Boston Gear No. 09612 Pressure Angle 14-1/2° Diametral Pitch 24 Face 1/4” Material steel Teeth 30 Pitch Diameter 1.250” Bore 3/8” Hub 1” Ø Hub Projection 3/8” NO. 530-16 SPUR GEAR 2 REQUIRED PER AIRCRAFT FULL SCALE make from: Boston Gear No. 09612 see drawing No. 530-7 & 530-8 for installation 1.00" Ø .56" Ø .06" R .08" Ø (typ) Boston Gear No. 37006 Pinion Wire Pressure Angle 14-1/2° Diametral Pitch 24 Material steel Teeth 16 Pitch Diameter 0.667” NO. 530-17B CHANGE GEAR PINION ONE REQUIRED PER AIRCRAFT FULL SCALE make from: Boston Gear No. 37006 pinion wire see drawing No. 530-8B for installation .320" .250" DRAWING NUMBER 530-17B SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-87 FULL CHANGE GEAR PINION FOR MODEL B .375" Ø (press fit into P/N 530-16) .2500" .2495" Ø .2500" .2495" Ø .608" .313" 1.491" NO. 530-18 SHAFT ONE REQUIRED PER AIRCRAFT FULL SCALE material: 4130 or 4140 steel heat treat to 125,000 psi see Drawing No. 530-2 for installation DRAWING NUMBER 530-18 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL SHAFT FOR MODEL A, B, C 2.00" 2.912" 1.793" .869" .250" .429" .25" Ø .156" Ø .188" Ø .3750" .3745" Ø .4998" .4996" Ø Boston Gear No. 37006 Pinion Wire Pressure Angle 14-1/2° Diametral Pitch 24 Material steel Teeth 16 Pitch Diameter 0.667” NO. 530-19B CHANGE GEAR PINION ONE REQUIRED PER AIRCRAFT FULL SCALE make from: Boston Gear No. 37006 pinion wire see drawing No. 530-7B for installation .633" .250" DRAWING NUMBER 530-19B SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-87 FULL CHANGE GEAR PINION FOR MODEL B .375" Ø (press fit into P/N 530-16) .2500" .2495" Ø .2500" .2495" Ø .295" .313" 1.491" material: SAE 660 bronze cadmium plate see Drawing No. 530-3 for installation NO. 530-20 BEARING ONE REQUIRED PER AIRCRAFT FULL SCALE DRAWING NUMBER 530-20 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL BEARING FOR MODEL A, B, C .5020" .5015" Ø .3760" .3755" Ø .62" Ø .375" .094" material: SAE 660 bronze cadmium plate see Drawing No. 530-6 for installation NO. 530-21 BEARING ONE REQUIRED PER AIRCRAFT FULL SCALE DRAWING NUMBER 530-21 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL BEARING FOR MODEL A, B, C .361" .5020" .5015" Ø .3760" .3755" Ø material: SAE 660 bronze cadmium plate see Drawing No. 530-4 for installation NO. 530-22 BEARING ONE REQUIRED PER AIRCRAFT FULL SCALE DRAWING NUMBER 530-22 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL BEARING FOR MODEL A, B, C .312" .5020" .5015" Ø .3760" .3755" Ø NO. 530-23 MOTOR ONE REQUIRED PER AIRCRAFT FULL SCALE motor: American Bosch P/N MO66137A see Drawing No. 530-5 for installation DRAWING NUMBER 530-23 SCALE DATE Sequoia Aircraft Corporation TITLE 7-3-87 FULL MOTOR FOR MODEL A, B, C 2.30" B.C. 2.625" 2.621" Ø 0.407" 0.447" .65" 0.240" 0.225" 0.066" 0.042" 10-32 stud (2) .313" Ø .106" American Bosch P/N MO66137A motor motor specs: .225 hp, peak intermittent duty cycle dual rotation permanent magnet operation: 35 oz. in. 14.6 amps 4260 rpm locked rotor: 172 oz. in 61 amps no load: 2.7 amps 5350 rpm 12 volt motor available from Commercial Aircraft Products NO. 530-24 KEY ONE REQUIRED PER AIRCRAFT FULL SCALE material: steel see Drawing No. 530-11 for installation DRAWING NUMBER 530-24 SCALE DATE Sequoia Aircraft Corporation TITLE 7-5-84 FULL KEY FOR MODEL A, B, C .094" .225" .313" .454" .101"

All Sequoia F-8L Falco parts catalog