SONEX Onex — Maintenance Manual
1 maintenance manual reference for the SONEX Onex.
Overview
Wing Installation Instructions
This document provides detailed instructions for the installation and removal of wings on the Sonex Onex aircraft. It outlines the necessary steps to ensure proper alignment and safety during the process.
- Preparation involves laying wings beside the fuselage and lubricating root tangs.
- Wings must be installed with attention to the position of the aileron pushrod and pitot lines.
- Safety pins must be inserted after the spar pins are in place.
- The installation process includes connecting flap and aileron pushrods.
- The removal procedure requires disconnecting various components in a specific order.
- Double-checking all connections is crucial before finalizing the installation.
- Each wing requires support during both installation and removal.
- Proper handling of the pitot tube is necessary during wing removal.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
1 document