Airbus H145 Checklists
AIRBUS H145 · Checklist
Overview
The Airbus H145 Checklists document provides a comprehensive set of procedures for various phases of flight operations, including before start, engine start, before take-off, landing, and after landing. Each checklist outlines specific actions and checks to ensure the aircraft is in the desired state for safe operation.
- Includes checklists for before start, engine start, before take-off, landing, and after landing.
- Emphasizes the importance of checking fuel, battery, and various systems.
- Requires specific actions for engine start and system tests.
- Includes safety checks for lights and altimeters.
- Specifies the need for ATC clearance during landing.
- Instructs on the proper shutdown procedures after landing.
Document
Source
Originally published by squarespace.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Checklist
- File size ·
- 268 KB
- Publisher ·
- squarespace.com
- Language ·
- en
What is the Airbus H145 Checklists?
The Airbus H145 Checklists is a checklist for the AIRBUS H145.
Where does the Airbus H145 Checklists come from?
This copy of the Airbus H145 Checklists was originally published by squarespace.com and is hosted on Sprinkle as a free, searchable reference copy.
Most owners only have the POH. Here's the essential set for the AIRBUS H145.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
More AIRBUS H145manuals & documents
In this document
Before Start Checklist
Covers checks for fuel, battery, fire switches, and system messages.
Engine Start Checklist
Details the steps for starting the engines and testing hydraulic systems.
Before Take-Off Checklist
Includes checks for collective position, autopilot settings, and flight plan verification.
Landing Checklist
Focuses on ensuring landing lights are on and checking for warnings.
After Landing Checklist
Outlines the steps for shutting down systems and ensuring safety post-landing.
Safety notes
- Wait at least 30 seconds for engine cooldown before shutting down.
- Check for ENG1 FAIL ENG2 before engine shutdown.
- Ensure all lights are off after landing.
Full document text
Airbus H145 Checklists Item Desired State Cheats BEFORE START CHECKLIST Fuel Checked Tablet/Difficulty Set Battery Master On, then Engage Overhead Panel Test Fire Switch 1 EXT, then EXT+Warn, then OFF Overhead Panel Test Fire Switch 2 EXT, then EXT+Warn, then OFF Overhead Panel Test Switch Lamp Overhead Panel VMS Page/press NUM Battery > 23.5v VMS Page/weight subpanel Adjust Weights VMS Page Press PREV FND Page Check for Messages FND Altimeter/Baro Set Local POS Lights On Overhead Panel ENGINE START CHECKLIST Anti-Col Lights On Overhead Panel Fuel Prime Pumps 1 & 2 Both On Overhead Panel ENG I (L) Main Switch Idle Check VMS for START, then IDLE ENG II (R) Main Switch Idle Check VMS for START, then IDLE Test HYD Switch SYS 1 Overhead Panel, Check for LOW PRESS HYD2 Test HYD Switch SYS 2 Check for HYD1 LOW PRESS, HYD1 TR SHUT OFF Test HYD Switch OFF AFTER START CHECKLIST PT/Static Pilot & Copilot On Overhead Panel AVIO Master 1 & 2 ON Overhead Panel STBY Battery ON Overhead Panel LAVCS Switch PIL Overhead Panel Fuel Prime Pumps 1 & 2 Both OFF Fuel XFER Pumps F & A Both ON IBS (Inlet Barrier Filters) 1 & 2 Check Norm Overhead Panel INT EM/EX Lights Arm Overhead Panel Internal/Instrument Lights As Required Overhead Panel Air Cond/Ventilation As Desired Overhead Panel BEFORE TAKE-OFF CHECKLIST Collective Full Down Test Switch Lamp Overhead Panel, check Main Panel Lights MKR, DME 1&2, FMS 1&2 Test Switch P-FLT Overhead Panel, check for P-FLT TEST, wait for P-FLT TEST OK Test Switch Off Overhead Panel A. Trim Button Check On (Light Off) Center Panel AP/BKUP Button On (Light Off) Center Panel AP 1 Button On (Light Off) Center Panel AP 2 Button On (Light Off) Center Panel Emergency Floats As Required Overhead Panel Search Light As Required Flight Plan (GTN) Check Transponder (GTN) Set & On ATC Clearance As Required ENG 1 & II Switch FLIGHT & Latched Strobes On Landing Lights On FND Check no warnings LANDING CHECKLIST ATC Clearnace As Required Landing Lights On Search Light As Required FND Check no warnings FND Altimeter/Baro Check Set Local FND Decision Height Set AFTER LANDING CHECKLIST Strobes Off Landing Lights Off Search Light Off Cyclic Neutral Collective Full Down ENG I & II Switch Idle Wait at least 30s for engine cooldown Fuel XFER Pumps A & F Both Off PT/Static HTG Pilot & Copilot Off AVIO Master 1 & 2 Off Stby Battery Off LAVCS Switch Off Air Condition Off ENG I & II Switch Idle Check for ENG1 FAIL ENG2, wait for rotor stop Interior Lights Off Exterior Lights Off Battery Master Off