LP Aero Plastics Product Catalog

sanding disc. This will remove material quite rapidly with only slight pressure. A belt sander may be used with similar results. For best results the edges should be smoothed and rounded with fine sandpaper. This can be sanded by hand, with a rotary drum sander, or a file may be used in place of sanding. Smoothing the edges will lessen the tendency towards edge cracking or breakage. It will also extend the service life of the windshield. NOT RECOMMENDED: Trimming with a jig saw, saber saw, or a hand saw is not advisable. If hand sawing is absolutely necessary, a coping saw with a bone cutting blade with 30 teeth per inch may be used. Extreme care must be used to avoid the blade hanging up and starting a crack. We recommend that the blade be inserted in the saw backward so that the blade cuts when it is drawn towards you. Do not allow the edges of the acrylic to pinch and bind the blade DRILLING WINDSHIELDS: Do not use a standard metal or wood cutting bit to drill acrylic. This type of bit must be resharpened for acrylic. Take this bit and square off the cutting edge as per the drawing. The drill bit sharpened in this way will scrape a clean hole through the acrylic with no tendency to dig in or grab. Sharpen your drill bit as shown or purchase one of our special acrylic drill bits. The small price you pay for the correct drill bit will pay you dividends a hundred- fold by drilling smooth clean holes. Practice drilling on your old windshield or a piece of scrap acrylic before drilling your new windshield. Use a high speed with very light pressure when drilling. Holes should be drilled oversize to allow for expan- sion and contraction of the acrylic; Example: Drill a 3/16" hole for a 1/8" screw. Do not over-tighten screws. Screws should be snug only. Over-tightening will cause cracks around the holes. STANDARD WOOD OR METAL BITS WILL CAUSE BINDING AS IT BREAKS THROUGH THE OPPOSITE SIDE OF THE ACRYLIC. THIS WILL CAUSE SMALL CHIPS, FRACTURES, CRACKS, OR CAUSE THE WINDOW TO BREAK. DO NOT TAKE THE CHANCE! L.P. AERO PLASTICS, INC. Phone: (724) 744-4448 1086 BOQUET RD. Fax: (724) 744-7372 JEANNETTE, PA 15644-4707 WARRANTY: Our windshields and windows are warranted against defective materials and workmanship. The warranty is limited only to the replacement of the defective parts. There is no allowance for labor costs incurred during installation and removal of a defective part. Prior to installation the protective coating should be peeled and the part inspected. After inspection the window may be recovered with the protective coating which was removed or recovered with a cling type plastic food wrap. We will not assume any liability for damages due to improper installation or any damage incurred during shipping. Our warranty does not cover cracking, crazing, scratches or breakage. Any item shipped to us without proper authorization will be refused. Call for a return authorization number. WINDSHIELD INSTALLATION AND HANDLING INSTRUCTIONS Table of Contents Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 Policies and Warranty . . . .. . . . . . 2 Supplies & Accessories . . . . . . . . . 3 Cross Reference List . . . . . . . . . . 10 Make and Model List . . . . . . . . . 30 INDUSTRY LEADER At LP Aero Plastics, we take pride in having provided the aviation industry with superior quality replacement windows for over 60 years. Our catalog has now been expanded to include windshields, windows, lenses, accessories and installation supplies for over 500 different aircraft models of both domestic and foreign manufacture. Our windshield listings can be confirmed with serial and model numbers, year of manufacture, thickness of material, and cross-referenced with OEM part numbers. This comprehensive catalog is designed to clearly provide the appropriate information essential to ordering the correct parts. Being the most complete source of aircraft windshields and windows, the new LP AERO PLASTICS catalog is the most vital tool in window replacement. QUALITY All LP AERO PLASTICS’ windshields and windows are manufactured of high optic quality acrylics. These are available in clear, green, and solar gray tints for the pilot’s compartment and medium gray, dark gray, medium bronze and dark bronze for the passenger windows and skylights. Please also check current availability for UV Blocking tints. For ease of installation, they are trimmed to OEM specifications. Our quality control systems are approved by the Federal Aviation Administration, meeting the Federal Aviation Regulations, and the Department of Defense, meeting MIL-I-45208A. All FAA-PMA approved parts are shipped with the FAA-PMA approval tag, which has the complete approved applicability list attached. An “Airworthiness Approval Tag”, FAA form 8130-3, which is “NOT FOR EXPORT” is also attached. Our ODAR (Organizational Designated Airworthiness Representative) is available to assist in numerous certification issues for the OEM, TC, and STC projects. SERVICE Special attention is given by our staff to provide a fast, economical delivery. We make every attempt to secure the best freight discounts available and we pass those discounts on to our customers. We are able to ship many of the large Cessna, Piper, Beechcraft and other model windshields by UPS, FedEx, DHL and others. Check our price list in the rear of this catalog for those windshields, which will now ship via UPS. An extensive inventory of over 2000 different part numbers enables our Shipping Department to ship most orders within one day. AOG ORDERS are expedited and prioritized for the fastest possible shipment for a $50.00 nominal fee, per ship set. WORLD WIDE Total services are available for export shipments, including all documentation and crating as necessary for air freight. Our on-staff FAA-DMIR (Designated Manufacturing Inspection Representative) permits our company to provide prompt efficient compliance with the requirements of all foreign aviation authorities of the importing countries. The “Airworthiness Approval Tag”, FAA form 8130-3 for export, must be requested prior to the shipment being made. The name of the importing country must be supplied. PRICE Our prices are usually well below OEM prices and our discounts comparable or better. Dealer and Distributor discounts are extended to those companies qualified in aircraft parts, maintenance, sales, and service. SPECIAL ORDERS We are able to custom make windshields, windows and canopies from your specifications or your tools: home builts, extra thick windows, special vents, camera windows, large domes, and out-of-production windshields and windows. Any window manufactured by our company which varies in any way from our PMA approved data will not be supplied with a FAA-PMA tag. Installation of any non-standard, non FAA-PMA approved part on a certificated aircraft will require a 337 field approval or an STC. We will provide documentation and assistance in the approval process. RETURNS Any item* purchased from LP AERO PLASTICS may be returned for a full refund within 30 days of the original shipment date. Items returned 31 to 60 days after the original shipment date will be refunded less a 20% restocking charge. All returned items are subject to inspection and must be as new, untrimmed, unmodified, and undamaged. All factory protective coatings must be in place and intact. Returned items must be shipped prepaid and insured, and have an LP Aero Plastics “RETURN AUTHORIZATION NUMBER” written on the outside of the shipping container next to the shipping label. Please call for return authorization. After 60 days all sales are final and no refunds will be given. *All custom-made and non-standard windows are payable in advance and cannot be returned. Note: As an additional service to our customers, certain parts which are listed in this catalog are not manufactured by LP Aero Plastics but are in stock or available. The quality system of these parts is governed by their respective manufacturers. © 2016 LP Aero Plastics, Inc. All Rights Reserved Volume 9.0H Policies and Warranty P P Pa a ag g ge e e 2 2 2 Aircraft Windshields and Windows Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com WARRANTY: Our windshields and windows are warranted against defective materials and workmanship. The warranty is limited to the replacement of the defective parts. There is no allowance for labor costs incurred during installation and removal of a defective part. Prior to installation the protective coating should be peeled and the part inspected. After inspection the window may be recovered with the protective coating, which was removed, or recovered with a cling type plastic food wrap. We will not assume any liability for damages due to improper installation or any damage incurred during shipping. Our warranty does not cover cracking, crazing, scratches or breakage. Any Item shipped to us without proper authorization will be refused. Call for a return authorization number. AOG SERVICE: AOG orders will receive expedited and priority processing, manufacturing and shipping. There will be a $50.00 AOG fee. This fee may be adjusted upward based on the number of parts ordered. TINTS: Code of Federal Regulations (CFR) 23.775 states that, from the pilots back forward as seated in normal flight position, the windshield and windows must have a minimum light transmittance of 70%. The Green Tints (#2111 & SC-11) and Solar Gray Tints (#2515 & SC-15) have a minimum light transmittance of 72 to 75%. All type certified aircraft must comply with this regulation. Tints are not available for most pressurized aircraft outer pressure windows. The inner "scratch panel" windows may be tinted. Optional darker tints are available in gray and bronze where allowable and for any experimental aircraft. All orders will be filled with clear windows unless the particular tint is specified. There will be an additional charge of 20% for all in-stock tints unless otherwise noted. CUSTOM: Contact our custom department for special order canopies, windshields, or windows. We are able to manufacture windshields and windows from your specifications or your tools: home-builts, extra thick windows, special vents, camera windows, large domes, and out of production windshields and windows used by Type Certificated, Supplemental Type Certificated and Experimental aircraft. Any window manufactured by our company, which varies in any way from our FAA-PMA approved data, will not be supplied with a FAA-PMA tag. These windows will be manufactured in compliance with CFR 21.303 "Owner/Operator Produced Parts". An "Owner/Operator Produced Parts Form" will be provided and must be completed and submitted along with the window specifications, engineering data, and/or sample window in order for our company to proceed with the fabrication of the window order. A field approval FAA form 337 or STC may be required for installation in a certificated aircraft. We reco mmend that the form 337 be approved prior to proceeding with the fabrication of the window. Non PMA’d parts will be supplied with a letter of certification and any additional information which may be required by the FAA or their representative for approval. RETURNS: Any item* purchased from LP AERO PLASTICS may be returned for a FULL REFUND WITHIN 30 DAYS of the original shipment date. Items returned 31 to 60 days after the original shipment date will be refunded less a 20% restocking charge. All returned items are subject to inspection and must be as new, untrimmed, unmodified, and undamaged. All factory protective coatings must be in place and intact. Returned items must be shipped prepaid and insured, and have an LP AERO PLASTICS “RETURN AUTHORIZATION NUMBER” written on the outside of the shipping container next to the shipping label. Please call for return authorization. AFTER 60 DAYS ALL SALES ARE FINAL AND NO REFUNDS WILL BE GIVEN. *ALL CUSTOM-MADE AND NON-STANDARD WINDOWS ARE PAYABLE IN ADVANCE AND CANNOT BE RETURNED. SHIPPING: All shipments are FOB shipping point sent the least expensive way, freight collect and COD unless otherwise specified. Air freight, motor freight, Parcel Post, Federal Express, DHL, and UPS are available. EXPORTS: Each FAA-PMA approved window is supplied with an FAA-PMA identification tag and an FAA form 8130-3 tag FOR DOMESTIC USE ONLY -NOT FOR EXPORT. The 8130-3 tag for export must be requested at the time of order placement and there is an additional charge. Please contact our office for special rates on export services and crating. Effective January 1, 2016 MASTERCARD - VISA - AMERICAN EXPRESS - DISCOVER MINIMUM ORDER $10.00 AOG FEE $50.00 Supplies and Accessories P P Pa a ag g ge e e 3 3 3 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 Window Care, Installation Products, Parts and Accessories LP Aero Plastics - Acrylic Polish and Sealant Not just any polish is good enough to carry our name! A superior no-wax, non-yellowing formula containing polyethylene polymers. This superior product not only gives a super slick surface to your windshield and windows, but can also be used on your entire aircraft, including all the painted gloss surfaces, aluminum and fiberglass. Ease of application and removal is unmatched. Sold in 16 oz. single bottles and in cases of 12. PART NO. LP Aero Plastics Acrylic Polish and Sealant 16 oz. squeeze bottle SP-PL16 LP Aero Plastics Acrylic Polish and Sealant - Case of 12 bottles SP-PLCS DuPont Sontara ® Window Wipes New Sontara® window wipes are made of a proprietary blend of fibers that are softer than most conventional wipes. Since many scratches are caused by grit and dirt already on the surface of the window, this product features apertures that help pick up and remove dirt effectively. Using LP Aero Plastics Acrylic Polish and Sealant to "float up" the dirt before wiping is the best way to minimize the risk of scratching. DuPont Sontara® Window Wipes - Package of 25 wipes SP-AC1213WW125 DuPont Sontara® Window Wipes – Case - 20 packages of 25 wipes SP-AC1213WWCS LP Aero Plastics – Window Care Kit This Window Care Kit contains one 16 oz. bottle of LP Aero Plastics Polish and Sealant, one box of 25 Sontara Window Wipes, instructions and other documentation LP Aero Plastics Window Care Kit SP-PL16WW LP Aero Plastics Window Care Kit - Case of 12 kits SP-PL16WWCS “210” Plastic Cleaner and Polish For those who prefer an anti-fog, anti-static windshield and plastic cleaner in an aerosol spray. “210” Plastic Cleaner and Polish - 14 oz. Spray Can SP-210A “210 Plus” Plastic Scratch Remover A fine liquid abrasive for removing fine scratches that ordinary cleaner/polishes can’t handle. “210 PLUS” Plastic Scratch Remover - 15 oz. Squeeze Bottle SP-210P Supplies and Accessories P P Pa a ag g ge e e 4 4 4 Aircraft Windshields and Windows Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com Prism Kit This inspection prism kit is ideal and invaluable for inspecting windows on the aircraft where the holes and edges are hidden by the aircraft skin or fairings. By applying the couplant and positioning the prism on the window next to the edge of the skin, it allows you to see the entire edge of the acrylic including the mounting holes from top to bottom. You are able to see cracks and breaks in the acrylic or glass. The standard prism has included angles of 45°, 70°, 110°, and 135°. PART NO. Window Inspection Prism kit - 45°, 70°, 110°, & 135° Cessna Window Inspection Prism kit – 35, 70 & 75 SP-PRIKT SP-PRIKT-7075 AV8B Window Inspection Prism kit – 30, 60 & 90 SP-PRIKT- AV8B Prism Repair SP-PRIREP Special Acrylic Drill Bits Don’t be fooled by the over the counter so-called “plastic drill bits” purchased at your local hardware store. Our drill bits are specially sharpened to scrape a clean hole through your acrylic window. These drill bits will not chip or crack the acrylic like standard drill bits. They are available in individual sizes from 1/8" to 1/2" and 1/2" 100 degree countersink. Sets with coun- tersink and index box take the guesswork out of which bits to purchase. This type of bit is required when drilling windshields and windows is specified. Remember that acrylic expands and contracts, so drill your holes oversize. 1/8" .......................................................................................... SP-D18 9/64" ........................................................................................ SP-D964 5/32" ........................................................................................ SP-D532 3/16" ........................................................................................ SP-D316 7/32" ........................................................................................ SP-D732 1/4" .......................................................................................... SP-D14 9/32" ........................................................................................ SP-D932 5/16" ........................................................................................ SP-D516 3/8" .......................................................................................... SP-D38 7/16" ........................................................................................ SP-D716 1/2" .......................................................................................... SP-D12 100° countersink ...................................................................... SP-CS100 Drill Bit Set in index with countersink ....................................... SP-DBST Foam Tape This is an adhesive backed, closed cell foam tape which is available in various sizes by the roll. This tape can be wrapped around the edges of the windows to both cushion and seal. DO NOT STRETCH DURING APPLICATION, IT WILL PULL BACK AND LEAVE GAPS. Piper used this extensively in their window installations. Foam tape 1/4" x 1/32" x 100' SP-FT132 Foam tape 1/4" x 1/16" x 100' SP-FT116 Foam tape 1/4" x 1/8" x 75' SP-FT5112 Foam tape 1/4” x 1/8” x 10’ used on sealing flange of vent windows SP-FT1410 Foam tape 1/2" x 1/4" x 50' SP-FT121450 Foam tape 1 1/4" x 1/16" x 100' SP-FT114100 Foam tape 1 1/4" x 1/16" x 25' SP-FT114125 Foam tape 1 1/4" x 1/16" per lineal foot SP-FT11412 Supplies and Accessories P P Pa a ag g ge e e 5 5 5 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 Felt Tape Adhesive backed in various widths and thicknesses. Used on numerous Cessna front and rear windshields. Available in rolls and by the foot. PART NO. Felt - adhesive backed 1/16" x 1 ¼" (per lineal ft.) SP-F114 Felt - adhesive backed 1/16" x 1 1/2" (per lineal ft.) SP-F112 Felt - adhesive backed 1/16" x 2" (per lineal ft.) SP-F2 Rubber U Channel Rubber U channel used in many Cessna side window installations. Available by the lineal foot. Rubber U channel - 1/8" slot, 1/4"wide, 1/2"tall (per lineal ft.) FP-850783 Piper Black Tar Tape Used by Piper on many of the older windshield installations. Available in rolls 1/16" x 1" by 50 ft. Piper black tar sealing tape 1/16" x 1" x 50' SP-TT50 Strip Sealants The following are strip type sealants. These are especially useful in filling large gaps. These sealants are used in many Cessna installations. Green, 1/8" x 1/2" x 50’ roll – Cessna sealant 579.6 (Presstite) SP-5796 Polyurethane Sealant Bostik 1100FS Fast Set Polyurethane Sealant is now being recommended by Piper Aircraft for many of their window instal- lations. This is a non-hardening, paintable, fast curing, sealant. (Work life – 70 minutes, Tack free – 90 minutes, Full cure 1.5 to 3 days) Do not use where holes have been drilled through the sealing/mounting edge of the windshield. Bostik 1100FS urethane sealant 10.1 oz. tube – black SP-1100BL Bostik 1100FS urethane sealant 10.1 oz. tube – white SP-1100WT RTV-732 Silicone Sealant, 1200 and 1205 Prime Coats Dow Corning Silicone Sealant in clear and black. 10.1 oz. tubes. The Dow Corning Prime Coat #1200 is used on most metals and the Dow Corning Prime Coat #1205 is used on most plastics and composites. Be sure to mask both the window and the aircraft skin prior to applying the sealant. This will make for very easy cleanup and a professional installation. This applies to any sealant you may use. RTV-732 Dow Corning silicone sealant 10.1 oz. tube – clear SP-R732C RTV-732 Dow Corning silicone sealant 10.1 oz. tube – black SP-R732B Two-Part Polysulfide Sealants This is a two-part, gray sealant, available in both an 8 oz. can with separate accelerant and a two-part cartridge for use with a hand application gun. We stock the “B2” which allows a 2 hour work time and a 48 hour cure time. This sealant meets AMS- S-8802B, which supersedes Military Specifications – MIL-S-8802. Interchangeable sealants: Advanced Chemistry & Technology – MC-236B Courtaulds Aerospace – Pro-Seal 890B, PR-1440B, PR-1487 D Aircraft Products – BR4005B Flamemaster Corp – CS3204B Fiber Resin Corp – PS-1102B J & R Industries – WS-8020B ½ pint can – Two-Part sealant kit (AC-236 B2) SP-32048 5 oz. Cartridge sealant kit – with nozzle (AC-236 B2) SP-6611 Hand application gun – for use with cartridges SP-K162 Replacement plastic collar for hand application gun SP-BEZ Supplies and Accessories P P Pa a ag g ge e e 6 6 6 Aircraft Windshields and Windows Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com Two-Part Polysulfide Sealants, Weather Resistant – Other Exterior moldline and canopy/windshield sealant. Two-part, black, 2 hour work time, 9 hour cure time. This sealant meets MAT-645F, Class B-2 Interchangeable sealants: Courtaulds Aerospace – PR-1425 Courtaulds Aerospace – PR-1489 PART NO. 3.5 oz. Cartridge sealant kit – with nozzle SP-AC-251B2 6 ml Adhesion promoter for use with SP-AC-251B2 SP-137 Hand application gun – for use with cartridges SP-K162 Bonding Kits For Grumman/Gulfstream/American General/Tiger Aircraft AA-1 and AA-5 Series Windshields and Canopies The sealant and instruction sheet are included for bonding the windshield to the windshield bow and the canopy to its frame. There are two different bonding systems used for these applications. The original bonding system consisted of Dow Corning RTV 732 as the bonding agent with Dow Corning 1200 Prime Coat for the aluminum and 1205 Prime Coat for the acrylic with a 72 hour cure time. Tiger Aircraft used a bonding system that consisted of a two-part polysulfide AC-251 B2 with AC-137 promoter with a two hour work time and 12 hour cure with full cure in 7 days. Windshield Bonding kit with one AC-251 B2 and AC-137 SP-BKG1 AA-1 Canopy Bonding kit with two AC-251 B2 and one AC-137 SP-BKG2 Acrylic Cement Used when bonding acrylic to acrylic, as in compass mount blocks, reinforcing strips, patches, etc. The liquid acrylic cement is water-like in consistency and is most easily applied with a syringe. The thickened cement is heavy bodied and is easily applied from the tube. The liquid cement requires tight contact between both bonding surfaces, while the thickened cement will fill slight gaps. Both will have excellent bonding strength when fully cured. WeldOn 3 – Liquid acrylic cement – 1 pint SP-C1PT WeldOn 3 – Liquid acrylic cement – 4 oz. SP-C4OZ Syringe for acrylic cement – WeldOn 3 SP-SYGE Installation Kits for Beechcraft Conversions 978, 979, 980, 981, 991, 997 Each kit contains the stainless screws, nuts, and washers as well as the adhesive/sealant to mount the designated window Installation kit – use with 981 SP-IK981 Installation kit – use with 978, 979, 980, 991, 997 SP-IK978 Installation kit – use with 977 SP-IK977 The following parts are required for new installations of the 977 series windshield Front windshield aluminum retainer SP-D0002-001 Defroster duct outlet adapter – may need 1 or 2 – check your aircraft installation SP-D0004-001 Defroster diffuser SP-D0003-001 Glareshield SP-D0005-001 Supplies and Accessories P P Pa a ag g ge e e 7 7 7 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 Windshield Installation Kits for Piper PA-24, -28, -30, - 32, -34, -39, and .44 PA-24, -30 models with 1 or 2 piece windshields 2 ea. SP-32048 – polysulfide sealant – ½ pint can kit 1 ea. SP-FT114125 – Foam sealing tape 1 ¼” x 1/16” x 25’ SP-2430-WSCAN PA-24, -30 models with 1 or 2 piece windshields 2 ea. SP-6611 – polysulfide sealant – 5 oz. cartridge kits 1 ea. SP-FT114125 – Foam sealing tape 1 ¼” x 1/16” x 25’ SP-2430-WSCRT PA-24, -30 models with 1 or 2 piece windshields 2 ea. SP-6611 – polysulfide sealant – 5 oz. cartridge kits 1 ea. SP-FT114125 – Foam sealing tape 1 ¼” x 1/16” x 25’ 1 ea. SP-K162 – Cartridge hand application gun SP-2430-WSCRTG PA-28, -32, -34, -44 models with 2 piece windshields 2 ea. SP-1100BL – polyurethane sealant – black 1 ea. SP-FT114125 – Foam sealing tape 1 ¼” x 1/16” x 25’ SP-PA-WS2PC PA-28 1 piece conversion installation kit includes the attaching parts, hardware, sealant and STC SP-K2028KIT-28 PA-32 1 piece conversion installation kit includes the attaching parts, hardware, sealant and STC SP-95032-001KIT PA-34 1 piece conversion installation kit includes the attaching parts, hardware, sealant and STC SP-97016-001KIT PA-44 1 piece conversion installation kit includes the attaching parts, hardware, sealant and STC SP-K2028KIT-44 Side Window Installation Kits for Piper PA-24, -28, -30, - 32, -34, -39, and .44 PA-24, -28, -30 models with four side windows 2 ea. SP-1100BL – polyurethane sealant – black 2 ea. SP-FT114125 – Foam sealing tape 1 ¼” x 1/16” x 25’ SP-PA-4WIN PA-24, -28, -30, -32, -34, -44 models with six side windows 3 ea. SP-1100BL – polyurethane sealant – black 2 ea. SP-FT114125 – Foam sealing tape 1 ¼” x 1/16” x 25’ SP-PA-6WIN PA-32, -34 models with eight side windows 4 ea. SP-1100BL – polyurethane sealant – black 3 ea. SP-FT114125 – Foam sealing tape 1 ¼” x 1/16” x 25’ SP-PA-8WIN Vent Window Hinge and Latch Assemblies For replacing vent window hardware on: Beechcraft models 33, 35, 36, 55, 56, 58, 95. PART NO. Hinge & latch assembly – Clear Polycarbonate SP-BHL 2 hinge assemblies with mounting screws – Clear Polycarbonate SP-BHO Latch and catch with mounting screws – Clear Polycarbonate SP-BLO Bellanca Viking & Super Viking Hinge & latch assembly – Clear Acrylic SP-BLHL Piper PA-28, -32, -34, -44 Piper Hinge & latch assembly complete with fasteners SP-PHL Piper Hinge assembly only with fasteners SP-PHIG Piper Latch complete assembly with attaching parts & fastener SP-PLAT Piper Latch only – white SP-PLA Supplies and Accessories P P Pa a ag g ge e e 8 8 8 Aircraft Windshields and Windows Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com Compass Mounting Kits These compass mounting kits are designed primarily for use on Cessna windshields which are using our STC compass mounting block bonded to the windshield. The windshield part number is designated with a suffix (/CMB). Kits are available with or wi thout a new Airpath compass. Compass and mounting kit for Cessna STC conversions. Kit includes Airpath C2200L4 compass, compass housing, deviation card, attached mount, and hardware. SP-CMKT Compass mounting kit for Cessna STC conversions Kit is applicable only to the Airpath C2200L4 and includes compass housing, deviation card, attached mount, and hardware (Airpath C2200L4 Compass not included). SP-CHKT Compass block adapter plate, which allows you to mount the original two hole base plate to the newer three hole base plate used on our windshields for the 100 and 200 series aircraft. LP-302AP Glareshield Compass Mount This is a polished, clear acrylic, compass mounting bracket for kit aircraft, which is bent at a 90 degree angle and allows you to mount your compass to the top of your glareshield. Compass mount for glareshield installations – acrylic – Non-PMA LP-081 Aircraft Quality, Cell Cast Sheet Acrylic Sheet acrylic is available in the following colors, sizes, and thicknesses. These sheets meet ASTM D4802 or Federal specification L-P- 391D and are of aircraft quality. Each sheet is available in clear, 2111 green tint, and 2515 solar gray tint. Additional tints are available in some thicknesses and sizes. Also available are some acrylic sheets meeting MIL-PRF-5425E, MIL-PRF-8184E, and MIL- PRF-25690B. Please contact us with your request. LIST PRICE PER SQUARE FOOT THICKNESS* CLEAR GREEN (2111) Gray (2515) UV-CL (83SC) UV-GT (SC11) UV-SG (SC15) CODE .060” 21.00 23.00 C .080” 21.00 23.00 23.00 28.00 38.00 38.00 C .100” 21.00 23.00 23.00 38.00 38.00 C .125” 21.00 23.00 23.00 29.00 32.00 32.00 C .150” 23.00 25.00 25.00 38.00 38.00 C .187” 23.00 25.00 25.00 32.00 38.00 38.00 C .250” 27.00 29.00 29.00 38.00 44.00 44.00 C NOTE – These are nominal thicknesses based on the industry’s cell cast acrylic sheet tolerances. The tolerance range chart is shown on the inside back cover of the catalog. Pricing and sheets sizes of other tints are available upon request. Minimum order may be required. Acrylic Sheet Sizes: Standard size: 48" x 72" - .060”, .080”, .100” 48" x 96" - .125”, .250” 72" x 96" - .125”, .150”, .187”, .250” *Full size sheet may require in-person pickup. Maximum sheet sizes capable of shipment is available upon request. Not all colors are available in each of these sizes. All sales are based on availability from current stock. THERE IS A 20% CUTTING CHARGE. MINIMUM CUTTING CHARGE OF $10.00. A CRATING CHARGE MAY APPLY. Supplies and Accessories P P Pa a ag g ge e e 9 9 9 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 ACRYLIC SHEET COLORS Color Code Visible Light Transmittance Clear CL 92% Clear – UV and Infrared Blocking (83SC) UV-CL 83% Green Tint (2111) GT 77% Green Tint – UV and Infrared Blocking (SC11) UV-GT 77% Solar Gray (2515) SG 76% Solar Gray – UV and Infrared Blocking (SC15) UV-SG 76% Medium Gray (2514) MG 59% Dark Gray (2074) DG 13% Dark Gray – UV and Infrared Blocking (SC74) UV-DG 13% Bronze (2404) BZ 49% Medium Bronze (2412) MZ 27% Dark Bronze (2370) DB 10% Blue (2454) BL 78% Medium Blue (2069) MB 55% ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE © 2016 LP Aero Plastics, Inc. All Rights Reserved Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 1 1 10 0 0 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT AERO COMMANDER (SEE GULFSTREAM AMERICAN AERONCA (SEE BELLANCA) AEROSPATIALE SOCATA TB10.22.030.100 972 TB10.22.030.101 973 TB10.22.030.102 972 SG TB10.22.030.103 973 SG TB10.24.030.100 967 TB10.24.030.101 967 SG TB10.25.030.106 968 TB10.25.030.107 970 TB10.25.030.108 968 SG TB10.25.030.109 970 SG TB10.25.900.100 969 TB10.25.900.101 971 TB10.25.900.115 969 SG TB10.25.900.116 971 SG TB10.63.000.108 974 TB20.18.001.102 975 TB20.18.001.103 976 TB21.24.001.101 967 SG 892.25.0.072.1 1141 892.25.0.072.2 1142 892.25.1.140.1 1143 SG 892.25.1.140.2 1144 SG 892.25.2.117.1 1143 892.25.2.117.2 1144 894.25.0.003.0 1140 Z00.07126.27 973 AIR TRACTOR 10211-1 080 10250-1 077 ALON A13250-5 872 A13250-31 872 GT A13250-32 873 GT A13250-53 872 A13250-54 873 A13260-7 870 A13260-8 871 A13270-6 874 A13270-7 874 GT OEM Part No. LP Part No. TINT AMERICAN CHAMPION (SEE AERONCA OR BELLANCA) AMERICAN GENERAL (SEE GULFSTREAM AMERICAN) ARCTIC AIRCRAFT COMPANY (SEE INTERSTATE AIRCRAFT) AYRES 10153-1 535 10627-001 013 10627-002 013 10838-001 014 BEECHCRAFT 000-170000-53 1057 000-170000-54 1058 000-170001-13 1055 000-170001-14 1056 000-170028-1 149 000-170028-2 150 002-430000-117 284 GT 002-430000-118 285 GT 002-430000-129 284.250 GT 002-430000-130 285.250 GT 002-430001-57 029 GT 002-430001-59 028 GT 002-430001-61 029.250 GT 002-430001-63 028.250 GT 002-430051-1 269 GT 002-430051-3 269 002-430051-21 269 GT 002-430051-27 269 002-430052-1 211WV GT 002-430052-11 211 GT 002-430052-13 188 GT 002-430052-27 211WV GT 002-430053-1 254 GT 002-430053-2 255 GT 002-430053-3 254.250 GT 002-430053-4 255.250 GT 002-430053-9 254 GT 002-430053-10 255 GT 002-430053-11 254.250 GT 002-430053-12 255.250 GT 002-430053-19 254 GT 002-430053-20 255 GT 002-430053-21 254.250 GT Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 1 1 11 1 1 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT BEECHCRAFT continued 002-430053-22 255.250 GT 002-430053-41 254 GT 002-430053-42 255 GT 002-430053-43 254.250 GT 002-430053-44 255.250 GT 002-440033-23 383 251411-1 1111 POLARIZE 251411-3 1112 POLARIZE 33-410010-1 140 GT 33-410010-2 141 GT 35-001029-19 256 35-001029-20 257 35-115136-2 286 35-115136-3 286 35-400320-4 253 35-400320-10 253 35-400320-32 253 GT 35-400320-34 253 GT 35-410000-98 256 GT 35-410000-99 257 GT 35-410291-4 252 35-410291-8 250 35-410291-11 251 35-410291-12 254 35-410291-13 255 35-410291-14 252 GT 35-410291-20 252 35-410291-34 250 35-410291-35 251 35-410291-86 258 35-410291-96 258 35-410291-126 254 35-410291-127 255 35-410291-128 254 GT 35-410291-129 255 GT 35-410291-130 254 GT 35-410291-131 255 GT 35-410291-132 252 GT 35-410291-134 252 GT 35-410291-136 258 GT 35-410291-138 258 GT 35-410291-146 254 GT 35-410291-147 255 GT 35-410291-164 280 35-410291-165 281 35-410291-166 280 OEM Part No. LP Part No. TINT BEECHCRAFT continued 35-410291-167 281 35-410291-217 211 GT 35-410291-219 188 GT 35-410291-221 211WV GT 35-410291-231 250 GT 35-410291-232 251 GT 35-410291-626 258 GT 35-410291-628 252 GT 35-410291-650 258 GT 35-410291-652 252 GT 35-410291-SA20 258 35-410474-1 270 GT 35-410474-27 270 35-410474-29 270 GT 35-410474-31 270 35-410474-57 270 GT 35-410474-59 270 35-410474-61 270 GT 35-410474-63 270 35-410474-75 270 GT 35-440010-13 383 36-400011-89 029 GT 36-400011-91 028 GT 36-430011-105 024 GT 36-430011-107 025 GT 36-430011-337 024.250 GT 36-430011-339 025.250 GT 36-430044-3 294.250 GT 36-430044-5 294 GT 36-430045-5 253 45-115136-2 573 45-115136-3 572 45-410301-1 268 45-410301-19 268 45-410302-13 569 45-410303-1 570 45-410303-27 570 45-410304-13 571 50-110066-26 298 50-110066-27 299 50-400005-6 249 50-400005-8 249 50-400331-23 282 50-400331-24 283 50-400459-9 142 GT 50-400459-10 144 GT Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 1 1 12 2 2 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT BEECHCRAFT continued 50-400459-35 143 GT 50-420013-191 1108 GT 50-420013-1053 1108 GT 50-420066-103 1100 50-420066-104 1101 50-420066-317 1100 50-420066-318 1101 50-420066-353 1102 50-420066-354 1103 50-420066-419 1116 50-420066-420 1117 50-420066-437 1116 50-420066-438 1117 50-420083-25 1104 50-420083-26 1105 50-420083-45 1106 50-420083-46 1107 50-440014-43 1109 GT 50-440014-44 1110 GT 50-440014-837 1109 GT 50-440014-838 1110 GT 95-420012-15 253.250 GT 95-420012-17 253.250 GT 96-170000-7 149 96-170000-8 150 96-420011-1 254.250 GT 96-420011-2 255.250 GT 96-420011-3 (assy.) 252.250 GT 96-420011-7 258.250 GT 96-420011-11 254.250 GT 96-420011-12 255.250 GT 96-420011-23 254.250 GT 96-420011-24 255.250 GT 96-420011-632 258.250 GT 96-420011-634 252.250 GT 96-420029-1 269 GT 96-420029-3 269 96-430010-11 284 GT 96-430010-12 285 GT 96-430010-67 284.250 GT 96-430010-68 285.250 GT 96-430010-87 285 GT 96-430010-89 285.250 GT 101-420080-1 1118 101-420080-2 1119 101-420080-5 1118 OEM Part No. LP Part No. TINT BEECHCRAFT continued 101-420080-6 1119 101-420080-7 1118 101-420080-8 1119 101-420081-1 1114 101-420081-2 1115 101-420081-5 1114 101-420081-6 1115 101-430183-3 1120 101-430183-5 1120 101-430194-3 1123 101-440042-1 1121 101-440042-2 1122 101-440042-3 1121 101-440042-4 1122 105-420015-15 173 105-420015-16 174 108-360014-11 005 108-430000-13 001 GT 108-430000-15 003 GT 108-430000-16 004 GT 108-430010-5 002 GT 114-430040-3 1124 DB 114-430156-1 1125 DB 169-110000-237 274 169-110000-239 274 169-110000-247 274 169-364017-11 274 169-420000-27 119 169-420000-28 121 169-420000-29 123 169-420000-30 125 169-420000-117 120 169-420000-118 132 169-420000-127 124 169-420000-128 126 169-420005-57 248 169-420005-61 175 169-420005-89 259 169-420005-99 272 169-420005-125 264 169-420005-127 278 169-420005-165 265 169-420005-167 176 169-420005-168 177 169-420005-169 278 169-420005-177 178 Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 1 1 13 3 3 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT BEECHCRAFT continued 169-420005-178 179 169-420005-197 114 169-420005-201 259 169-420005-603 259 169-420010-17 180 169-420010-71 180 169-420021-5 259 GT 169-420021-7 114 GT 169-420021-9 178 GT 169-420021-10 179 GT 169-420021-11 176 GT 169-420021-12 177 GT 169-420021-13 278 GT 169-420021-15 180 GT 169-420021-19 131 GT 169-420021-23 259 GT 169-420023-15 131 169-420035-23 273 169-420035-35 273 169-420035-37 273 169-420035-43 273 169-420035-605 273 169-420036-7 107 169-420036-8 266 169-420036-103 107 169-420036-119 108 169-420036-120 109 169-420037-3 267 169-420037-17 267 169-420037-21 267 169-420037-23 267 169-420037-25 267 169-420038-7 107 GT 169-420038-8 266 GT 169-420038-9 119 GT 169-420038-10 121 GT 169-420038-11 123 GT 169-420038-12 125 GT 169-420038-13 127 GT 169-420038-14 129 GT 169-420038-17 267 GT 169-420038-31 273 GT 169-420038-35 107 GT 169-420038-37 267 GT 169-420038-41 112 GT 169-420038-45 273 GT OEM Part No. LP Part No. TINT BEECHCRAFT continued 169-420038-47 120 GT 169-420038-48 132 GT 169-420038-49 124 GT 169-420038-50 126 GT 169-420038-51 113 GT 169-420038-53 128 GT 169-420038-54 130 GT 169-420038-55 108 GT 169-420038-56 109 GT 169-420038-65 273 GT 169-420038-67 273 GT 169-420038-71 173 GT 169-420038-72 174 GT 169-430015-9 112 169-430015-29 113 169-440005-133 127 169-440005-134 129 169-440005-185 128 169-440005-186 130 BELL HELICOPTER TEXTRON 206-031-115-011 2001 BL 206-031-115-033 2000 BL 206-031-116-101 2002 BL 206-031-116-103 2003 BL BELLANCA 3-469 231 3-470 232 4-594 227 4-714 226 4-715 225 4-945-1 116 4-947-1 238 4-948-1 240 4-1446 291 4-1487 297 7-463 233 7-468 202 7-521 205 7-538 234 7-538 239 7-852-2 203 7-852-3 204 7-1256-1 290 7-1256-2 289 7-1256-1R 289 Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 1 1 14 4 4 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT BELLANCA continued 7-1256-1L 290 7-1264 192 7-1286 288 SG 7-1418 293 7-1443 207 9841-16 808 9892-6 800 9897-2 805 15054-1 813 15121-18 212 19015-14 801 190223-1 802 GT 196552 819 GT 196562 817 GT 196940-1 816 GT 196940-2 820 GT 206113-1 818 GT BLANIK 105-02.07 1510 105-03.10 1516 105-03.16 1519 105-03.111 1518 105-04.10 1513 105-04.11 1514 105-04.12 1515 BRITTEN-NORMAN NB-04-ND-1837 880 NB-04-ND-2083 881 NB-15-ND-1653 880 NB-15-A2-2251 862 NB-15-A2-2252 884 NB-15-A2-2553 LP-NB-15-A2-2553 NB-15-A2-2554 LP-NB-15-A2-2554 NB-15-A2-2555 LP-NB-15-A2-2555 NB-15-A2-2561 LP-NB-15-A2-2561 NB-15-D-707 862 NB-15-D-708 884 NB-15-D-1028 884 NB-15-D-1177 861 NB-15-D-1179 866 NB-15-D-1181 865 NB-15-D-1249 864 NB-15-D-1251 863 NB-15-D-1253 867 NB-15-D-1259 883 OEM Part No. LP Part No. TINT BRITTEN-NORMAN continued NB-15-D-1589 876 NB-15-D-1593 878 NB-15-D-1594 879 NB-15-H-1063 826 NB-15-H-1064 825 NB-15-1859 LP-NB-15-1859 NB-15-1861 LP-NB-15-1861 NB-15-2251 LP-NB-15-2251 NB-15-2252 LP-NB-15-2252 NB-15-2261 LP-NB-15-2261 NB-15-2263 LP-NB-15-2263 NB-15-2265 LP-NB-15-2265 NB-15-2267 LP-NB-15-2267 NB-15-2515 LP-NB-15-2515 NB-15-2553 LP-NB-15-A2-2553 NB-15-2554 LP-NB-15-A2-2554 NB-15-2555 LP-NB-15-A2-2555 NB-15-2561 LP-NB-15-A2-2561 NB-15-2563 LP-NB-15-2563 NB-15-2569 LP-NB-15-2569 NB-15-3125 LP-NB-15-3125 NB-15-3127 LP-NB-15-3127 NB-15-3155 LP-NB-15-3155 SG NB-15-3157 LP-NB-15-3157 SG NB-15-3159 LP-NB-15-3159 SG NB-15-3161 LP-NB-15-3161 SG NB-15-3163 LP-NB-15-3163 SG NB-15-3164 LP-NB-15-3164 SG NB-20-D-2311 875 NB-20-D-4295 868 NB-20-D-4296 869 NB-85-921 LP-NB-85-921 NB-85-922 LP-NB-85-922 NB-85-2237 LP-NB-85-2237 NB-85-2245 LP-NB-85-2245 NB.90.0069 LP-NB.90.0069 NB.90.0070 LP-NB.90.0070 CESSNA 0311001-19 307 0311001-20 736 0311001-21 731 0311001-22 734 0311001-23 735 0311204-3 733 0311245 732 0411144 344 Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 1 1 15 5 5 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT CESSNA continued 0411144-1 344 BZ 0411172-3 301 0411172-5 300 0411172-49 303 0411182 342 0411372-50 344 0412020-10 360 0412020-21 360 GT 0412145 343 0412522-7 363 0413033-13 365 0413033-14 365 0413033-18 365 GT 0413033-19 365 GT 0413339-10 303 0413390-20 364 0413419-200 303 GT 0413419-201 303/302 0413419-202 303/302 GT 0413419-203 303 0413437-1 302 0417008-15 365 0417008-16 365 0417008-17 365 GT 0417008-18 365 GT 0510000-6 310 0510000-15 306 0510001-5 312 0510001-6 312 0511106-3 374 0511106-104 376 0511797-1 346 0511797-2 346 BZ 0512000-54 370 0512030-13 385 0512030-14 386 0512030-15 389 0512030-23 385 GT 0512030-24 386 GT 0512030-25 389 GT 0512030-203 389 GT 0512100-9 389 0512100-208 389 0512180-1 348 0512180-2 349 0512180-3 348 GT OEM Part No. LP Part No. TINT CESSNA continued 0512180-4 349 GT 0512180-5 348 0512180-6 349 0512180-7 348 GT 0512180-8 349 GT 0513230-10 313 0513230-12 345 0513230-14 345 GT 0513230-20 359 0513230-22 359 GT 0513230-27 337 0513230-29 337 GT 0513230-32 353 0513230-33 353 GT 0513230-34 353 GT 0513300-8 314 0513300-16 311 0517024-1 367 0517024-2 367 GT 0517024-4 423 0517024-5 368 0517024-6 368 GT 0517024-7 423 GT 0517024-9 423 0517024-11 424 0517024-12 425 0517024-13 424 GT 0517024-14 425 GT 0523115-5 373 0591200-3 388 0611098 321 0611098-1 321 0611099-1 323 0611158 322 0611218 320 0611218-1 320 0612134 305 0613050 308 0613050-1 308 0613050-2 308 0700111-1 361 0700111-2 361 GT 0700112-1 384 0700112-2 384 GT 0700112-3 387 0700112-4 387 GT Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 1 1 16 6 6 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT CESSNA continued 0710108-1 362.125 GT 0710108-2 362 GT 0710108-3 362 0710620-16 392 GT 0711050-28 391 GT 0711051-1 369 0711051-2 369 GT 0711051-6 391 GT 0711051-7 391 0711051-9 068 GT 0711600-10 394 0711600-11 393 0711600-19 395 0711600-20 396 0711600-27 395 GT 0711600-28 396 GT 0711600-29 393 GT 0711600-30 394 GT 0711675-10 397 0711675-11 371 0711675-12 372 0711675-13 371 GT 0711675-14 372 GT 0711675-15 397 GT 0711800-10 397 GT 0711800-11 371 GT 0711800-12 372 GT 0711800-18 390 GT 0713000-6 309 GT 0713000-24 315 0713000-53 315 GT 0713100-10 316 0713100-11 316 GT 0713287-11 339 0713287-12 339 GT 0713334-2 339 GT 0713538-1 318 GT 0713538-3 317 GT 0713600-8 338 0713600-10 338 GT 0717010-15 391 GT 0717010-16 392 GT 0717010-18 392 0717013-7 402 GT 0717013-8 402 GT 0717019-1 404 GT OEM Part No. LP Part No. TINT CESSNA continued 0717019-2 405 GT 0722100-4 381 0722100-10 382 0722100-15 416 0722100-16 417 0791300-4 309 0791300-7 315 0791300-13 315 GT 0791300-15 316 0791300-16 316 GT 0811040-4 946 GT 0811040-10 161 GT 0811042-2 947 GT 0811042-4 163 GT 0811043-1 957 GT 0811043-2 958 GT 0811046-1 959 GT 0811046-2 960 GT 0811046-4 164 GT 0811046-5 162 GT 0811047-1 961 GT 0811047-2 962 GT 0811173-1 169 GT 0811173-2 171 GT 0811174-1 170 GT 0811174-2 172 GT 0811175-1 165 GT 0811175-2 167 GT 0811176-1 166 GT 0811176-2 168 GT 0811202-7 720 GT 0811202-15 721 GT 0811202-25 720 GT 0811202-200 720 GT 0811208-200 720 GT 0811208-201 720 GT 0811231-1 723 GT 0811231-2 724 GT 0811232-1 725 GT 0811232-2 726 GT 0811285-6 567 GT 0811486-6 548 GT 0811516-1 333 GT 0811516-2 341 GT 0811680-14 541 GT 0811684-1 331 GT Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 1 1 17 7 7 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT CESSNA continued 0811690-25 543 GT 0811690-26 546 GT 0811691-1 543 GT 0811691-2 334 GT 0811691-3 335 GT 0811700-1 536 0811700-57 536 0811702-1 336 0811702-3 719 0811725-21 542 GT 0811726-1 332 GT 0811755-7 545 GT 0811755-8 547 GT 0813659-1 716 0813659-4 716 0813659-5 716 0813659-8 407 0813659-9 716 0813659-200 406 0814218-2 722 GT 0823411-13 689 0823411-14 679 0891107-3 720 GT 0891107-4 721 GT 0891107-5 721 GT 1210040-7 366 1210040-8 375 GT 1210040-23 375 1210041-2 347 1210532-1 076 GT 1210532-2 076 GT 1210533-1 079 1210533-2 079 1211061-47 070 1211061-54 069 1211061-56 072 1211061-57 072 1211061-58 071 1211349-1 075 GT 1211400-14 221 GT 1211400-16 220 GT 1211400-17 223 GT 1211400-18 224 GT 1211400-19 222 GT 1211448-7 420 GT 1211448-24 217 GT OEM Part No. LP Part No. TINT CESSNA continued 1211670-4 218 GT 1211673-5 219 GT 1212846-1 340 GT 1212846-2 340 GT 1212846-3 340 GT 1212846-4 340 GT 1213000-20 327 GT 1213001-17 067 GT 1213388-1 067 GT 1213400-15 325 GT 1213400-24 324 GT 1213400-200 326 GT 1213700-5 066 GT 1213800-200 330 GT 1221060-1 074 1221060-3 533 1221060-5 534 1400057-1 749 GT 1400057-4 756 GT 1400057-26 749 GT 1400057-28 749 GT 1411312-2 752 GT 1411312-3 729 GT 1411312-4 752 GT 1412312-1 730 GT 1412312-2 730 GT 1412312-3 730 GT 1412312-4 730 GT 1412312-5 747 GT 1412312-6 747 GT 1412312-7 747 GT 1412312-8 747 GT 1413700-28 741 GT 1413702-1 812 GT 1413702-3 728 GT 1422599-1 713 1422599-2 714 1511004-2 753 GT 1511159-3 765 GT 1511159-4 766 GT 1511160-1 760 1511161-1 757 1511161-2 758 1512004-5 740 GT 1512004-6 740 GT 1512004-7 737 GT Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 1 1 18 8 8 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT CESSNA continued 1512004-8 737 GT 1512063-9 762 GT 1512063-10 762 GT 1512063-11 764 GT 1512063-12 764 GT 1513700-3 741 GT 1513770-1 775 GT 1517102-1 759 GT 1610003-3 377 1610003-13 377 1610004-21 379 1610004-22 379 GT 1610016-9 378 GT 1610029-1 414 GT 1610029-2 415 GT 1610032-12 413 GT 1610032-13 411 GT 1610032-15 410 GT 1610032-16 412 GT 1710000-9 329 1710000-10 329 GT 1712000-5 527 1712000-6 528 1712000-7 529 1712000-8 527 GT 1712000-9 528 GT 1712000-10 529 GT 1717031-1 525 1717031-2 532 1717031-3 525 GT 1717031-4 532 GT 1717031-5 525 1717031-6 532 1717031-7 525 GT 1717031-8 532 GT 1717031-9 525 1717031-10 532 1717031-11 525 GT 1717031-12 532 GT 1717060-1 530 1717060-2 530 1717060-5 530 1717060-6 530 1717060-200 530 GT 1717060-201 530 GT 1717060-204 530 GT OEM Part No. LP Part No. TINT CESSNA continued 1717060-205 530 GT 2511010-1 1045 GT 2511010-4 1044 GT 2511010-5 1046 GT 2511010-6 1047 GT 2511124-1 1043 GT 2511128-1 1042 GT 2513503-1 1040 2513503-2 1041 2611024-1 1006 GT 2611024-2 1007 GT 2612057-1 1008 GT 2612057-2 1009 GT 2613088-1 1010 GT 2613088-2 1011 GT 2617024-2 1013 GT 2617024-4 1013 GT 2617059-1 1012 GT 2617059-2 1014 GT 5011135-4 032 GT 5011135-8 033 GT 5011135-12 035 GT 5011135-16 031 GT 5011162-3 754 5011162-4 755 5011165-4 994 GT 5011167-35 694 GT 5011167-36 695 GT 5011167-57 694 GT 5011167-58 695 GT 5011176-1 663 GT 5011176-2 664 GT 5011177-9 993 GT 5011177-10 994 GT 5011177-14 693 GT 5011190-5 034 GT 5011190-6 684 GT 5011277-4 030 GT 5091106-3 not sold as assembly 993 GT 5091106-4 not sold as assembly 994 GT 5091106-10 not sold as assembly 693 GT 5091106-11 not sold as assembly 691 GT 5111603-5 1154 5111603-6 1155 Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 1 1 19 9 9 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT CESSNA continued 5111604-1 1150 5111604-2 1151 5111604-200 1151 5111604-201 1150 5111604-202 1151 5111604-203 1150 5111605-1 1157 5111605-2 1156 5111605-3 1152 5111605-4 1153 5111605-5 1164 5111605-6 1162 5111605-7 1164 GT 5111605-8 1162 GT 5111605-9 1158 5111605-10 1159 5111605-11 1163 5111605-12 1163 GT 5111605-13 1160 5111605-14 1161 5211130-13 696 GT 5211134-5 742 GT 5211134-7 743 GT 5211134-9 744 GT 5211134-10 745 GT 5211135-3 685 GT 5211135-4 699 GT 5211135-5 686 GT 5211135-8 688 GT 5211135-9 685 GT 5211135-12 687 GT 5211135-13 683 GT 5211135-16 697 GT 5211135-17 682 GT 5211190-6 684 GT 5211346-12 not sold as assembly 691 GT 5211346-14 not sold as assembly 691 GT 5211346-17 not sold as assembly 691 GT 5311261-1 1062 5311261-2 1066 5311261-5 1069 5311261-15 1071 5311261-16 1072 5311261-10 1067 5311261-11 1063 OEM Part No. LP Part No. TINT CESSNA continued 5311261-201 1062 5311261-202 1066 5311261-205 1069 5311261-215 1071 5311261-216 1072 5311266-200 1061 5311266-201 1060 5311271-1 1064 5311277-5 1065 5311277-6 1068 5811150-3 665 GT 5811150-4 666 GT 5811150-5 668 GT 5811150-6 669 GT 5811150-7 674 GT 5811150-8 675 GT 5811150-9 676 GT 5811150-10 673 GT 5811152-1 665 GT 5811152-2 666 GT 5811152-3 668 GT 5811152-4 669 GT 5811152-5 672 GT 5811152-6 673 GT 5811152-7 674 GT 5811152-8 675 GT 5811152-9 676 GT 5811152-10 699 GT 5811180-15 672 GT 5811377-1 667 GT 5911024-3 1165 5911024-4 1166 CPAC, Inc. SEE GULFSTREAM AMERICAN COMMANDER AIRCRAFT SEE GULFSTREAM AMERICAN DEHAVILLAND C2FC133ND 949 C2FC134ND 948 C2FC321ND 996 C2FC322ND 995 C3FS135-3 904 C3FS135-4 906 C6FS1207-27 950 C6FS1207-28 951 Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 2 2 20 0 0 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT EMBRAER 4A-1115-50 1001 4A-1115-60 1002 4A-1115-75 1003 4A-1115-76 1004 4A-1115-90 1005 ERCOUPE (UNIVAIR) 415-31037 356 415-31042 350 415-31190 356 415-31191 350 415-53023 352 415-53024 352 415-53057 354 415-53058 354 FORNEY (UNIVAIR) F-31232-1 351 F-31248 358 F-53023 352 F-53024 352 F-53041 352 F-53057 354 GT F-53058 354 GT GLOBE SEE SWIFT GULFSTREAM AMERICAN (AERO COMMANDER, AMERICAN GENERAL, COMMANDER AIRCRAFT, CPAC, ROCKWELL, TIGER AIRCRAFT) 11216 296 11414 295 102279-1 657 102281-1 658 102281-2 658 102322-1 659 102322-2 660 102393-901 657 102393-902 657 GT 102395-901 658 102395-902 658 GT 201191-5 208 201191-6 209 33136 623 33411 622 33792 621 33895 620 OEM Part No. LP Part No. TINT GULFSTREAM AMERICAN continued 330002-221 638 330006-65 639 330041-137 637 330297-1 627 335005-3 1224 SG 335005-4 1225 SG 335006-509 1222 SG 335006-510 1223 SG 335006-511 1220 SG 335006-512 1221 SG 335030-1 531/LFT SG 335030-2 531/RHT SG 360001-219 630 360001-220 631 360002-61 635 360002-62 633 360002-67 633 360002-221 638 360002-509 625 360007-99 776 360007-100 777 360038-3 626 360038-4 624 43241-1 508 43241-3 508 SG 43241-501 507 SG 43247-1 512 43247-2 513 43247-3 512 SG 43247-4 513 SG 43247-503 512.250 SG 43247-504 513.250 SG 43752-1 509 SG 43752-2 511/WVO SG 43752-3 511 SG 43752-5 509.250 SG 43752-7 511.250WVO SG 43773-1 510/LFT SG 43773-2 510/RGT SG 43773-3 510/LFT SG 43773-4 510/RGT SG 5101035-1 228 5101035-2 229 5102273-502 965 5102273-503 965 GT 5102276-2 216 Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 2 2 21 1 1 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT GULFSTREAM AMERICAN continued 5102276-3 215 5102276-4 216 GT 5102276-5 215 GT 5102279-3 965 5102279-4 965 GT 5102322-1 966 5102322-2 966 5102322-3 966 GT 5102322-4 966 GT 5102348-1 213 5102348-2 214 5102348-3 213 GT 5102348-4 214 GT 5330002-215 643 5330002-221 638 5330006-65 639 5330041-131 642 5330041-137 637 5360001-219 630 5360001-220 631 5360001-221 632 5360002-3 635 5360002-4 633 5360002-7 636 5360002-8 634 5360002-49 636 5360002-50 634 5360002-61 635 536002-61 636 5360002-62 633 536002-62 634 5360002-509 635 5360002-510 633 5360007-99 776 5360007-100 777 5800005-11 641 5800005-12 640 7B10907-1 061 7B10907-3 061 GT 7B10907-11 062 7B10907-12 062 GT 7B10908-15 050 7B10908-23 050 GT 7B11001-21 063 7B11001-29 063 GT 800005-11 540 GT OEM Part No. LP Part No. TINT GULFSTREAM AMERICAN continued 800005-12 541 GT 804010-1 658 GT 804010-2 657 GT 804010-3 659 GT 804010-4 660 GT 904007-903 657 GT HELIO 295-030-302-2 447 295-030-334-0 444 295-030-802-0 448 295-030-807-0 446 295-030-807-1 445 391-000-009-2 449 391-030-803-0 443 IAR 823-16-175 1561 823-16-176 1562 INTERSTATE AIRCRAFT G-2B-1130-6 1469 G-2B-1130-1 1531 G-2B-1130-4 1532 G-2B-1130-2 1533 G-2B-1130-3 1534 G-2B-1130-5 1535 LAKE AIRCRAFT 2-3100-55 036 2-3100-56 037 2-3100-109 036 GT 2-3100-110 037 GT 2-3207-11 038 2-3207-12 039 2-3207-21 038 GT 2-3207-22 039 GT 2-3207-23 038 GT 2-3207-24 039 GT 3-3507-11 026 GT 3-3507-12 027 GT LUSCOMBE 08011-2 429 BL 081105-2 400 082223-4 431 082223-5 430 19139 428 Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 2 2 22 2 2 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT LUSCOMBE continued 481107-12 426 48125-2 427 MAULE 1168X 115 MOONEY 3165-1 139 3165-7 139 3189-1 102 3189-2 103 3189-3 104 3189-4 105 3266-1 100 3266-2 101 3266-7 100 3266-8 101 8146-1 102 8146-2 103 8146-3 104 8146-4 105 8146-7 102 8146-8 103.187 8146-9 104.187 8146-10 105.187 210215-003 692R 210215-004 692L 310016-007 139 GT 310016-009 563 GT 310016-011 646 SG 310054-001 100 310054-002 101 310240-003 151 GT 310240-004 152 GT 310240-005 153 GT 310240-006 154 GT 310240-007 582 GT 310240-008 583 GT 310240-009 584 GT 310240-010 585 GT 310316-001 561 GT 310316-003 644 SG 320044-013 648 SG 320044-014 649 SG 340066-004 105 340066-002 103 OEM Part No. LP Part No. TINT MOONEY continued 340066-003 104 340066-007 102 340066-008 103.187 340066-009 104.187 340066-010 105.187 340121-003 133 GT 340121-004 134 GT 340121-005 135 GT 340121-007 137 GT 340121-008 138 GT 340121-009 574 GT 340121-011 136 GT 340121-015 156 GT 340121-017 574 GT 340121-019 578 GT 340121-020 579 GT 340121-021 586 GT 340121-919 574 GT 340121-929 574 GT 340220-001 645 SG 340220-003 647 SG 340236-007 870 SG 340236-008 871 SG 340237-006 874 SG 340237-007 874 GT 340284-007 514 GT 340285-033 565 GT 340285-034 566 GT 340285-035 577 GT 340285-037 577 GT 340285-039 564 GT 340285-041 580 GT 340285-042 581 GT 340285-057 517 SG 340285-058 518 SG 340285-059 515 SG 340285-063 516 SG 340285-937 577 GT 650173-003 794 650189-001 767 650189-003 768 650213-005 788 800036 139 GT 940022-1 199 GT Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 2 2 23 3 3 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT NANCHANG H2-0300-02 1650 H2-0310-00-2 1651 H2-0300-09 1652 H2-0320-161 1653 H2-0320-162 1654 NAVION 145-31801-17 090 145-31801-18 091 145-31801-23 092 145-31801-23 FLUSH MOUNT 098 145-31801-24 093 145-31801-24 FLUSH MOUNT 083 145-31801-45 094 145-31801-87 088 145-31801-88 089 145-31801-93 FLUSH MOUNT 097 145-31801-94 FLUSH MOUNT 082 145-31801-111 095 GT 145-31801-112 096 GT 147-31801-1 085 147-31801-2 087 147-31801-3 086 147-31801-4 099 147-31801-5 085 147-31801-6 084 161-31001-105 432 GT 161-31001-106 433 GT 161-31001-107 434 GT 162-31801 –1 1550 205-54007-13 1551 PARTENAVIA SEE VULCANAIR PIPER 00079-20 452 10009-00 450 10041-00 008 10046-00 010 10047-00 011 10051-00 012 10056-00 006 10212 455 10220 437 10229 439 10331-00 436 OEM Part No. LP Part No. TINT PIPER continued 10544-00 010 10545-00 011 10545-00 466 10593 438 10673 454 10680-00 456 11174-00 451 11631 459 11635 017 11636 051 11651-00 015 12009-00 019 12011-00 016 12248-00 461 12249-00 457 12249-02 457 GT 12250-03 453 12253-00 469 12254-02 468 12255-01 467 12279-00 465 12430-00 464 12532-00 041 12684-00 018 12685-00 018 13432-00 462 13432-02 463 13432-03 463 13433-00 458 13433-02 458 GT 13849-00 023 14248-00 021 16337-00 520 16337-01 519 16341-00 482 16341-01 483 18100-33 477 18155-00 475 18156-04 474 18157-00 478 18157-01 479 18157-02 478 18157-03 479 18163-08 619 19512-04 472 19512-05 473 Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 2 2 24 4 4 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT PIPER continued 20348-00 064 20348-01 065 20672-00 185 20672-01 183 20672-02 184 20676-00 158 20676-03 158 20677-09 481 20677-10 480 20677-13 481 20677-14 480 20923-11 181 21027-00 159 21027-04 618 24020-00 186 24117-00 182 25496-02 769 25496-03 770 25496-04 771 25497-02 772 25497-03 773 25497-04 774 210037-07 1030 GT 210046-01 1031 GT 210046-02 1032 GT 210047-01 1033 GT 210050-01 1034 GT 210050-02 1035 GT 30478-00 615 30519-04 421 30519-05 422 30817-00 471 31013-00 613 31013-02 614 31013-03 613 SG 31014-00 610 31014-02 616 31014-03 610 SG 31015-00 611 31015-01 612 31015-02 617 31015-04 611 SG 31015-05 612 SG 31016-02 608 31016-04 608 SG 31447-00 609 OEM Part No. LP Part No. TINT PIPER continued 39508-04 891 39508-05 891 SG 494-705 1031 GT 494-706 1032 GT 494-708 1034 GT 494-709 1035 GT 41284-00 837 41284-01 838 41293-02 827 41293-03 829 41293-04 828 41293-06 828 GT 41294-02 831 41294-03 832 41294-04 832 GT 41295-02 843 41295-03 833 41295-04 834 41295-06 834 GT 41295-09 857 41296-00 835 41296-01 836 41296-02 835 GT 41296-03 836 GT 41590-00 398 41590-01 399 44574-05 847 44731-02 845 44731-03 846 44731-04 846 GT 44749-20 852 44749-21 851 44749-22 852 GT 45099-03 1176 45099-08 1173 45099-09 1176 45099-10 1173 45099-11 1178 45099-12 1172 45099-13 1177 46174-00 1179 46884-04 1181SM GT 48299-02 1180 48299-06 1180 49075-14 1181SM 49075-15 1181SM GT Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 2 2 25 5 5 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT PIPER continued 50083-09 012 50741-00 008 50751-00 010 50761-00 009 51141-00 006 51234-00 1174 52148-02 1171SM GT 52148-03 1171SM 52355-02 854 52355-03 860 52355-04 860 GT 52942-00 011 53712-00 012 53723-00 012 53733-00 012 53982-00 010 53993-00 008 54714-05 859 54714-06 859 GT 54714-15 859 SG 54901-04 1170 54901-05 1175 54901-06 1170 54903-14 1171 GT 54903-15 1181 GT 54903-16 1171 54903-17 1181 55254-04 858 55254-05 858 GT 55254-15 858 SG 55254-18 886 SG 55258-04 856 55258-05 856 GT 55258-31 856 SG 55266-09 855 55266-10 855 GT 55266-28 855 SG 55267-06 853 55267-07 853 GT 60219-00 045 61312-00 485 61313-00 047 61316-00 440 61407-00 048 61802-03 486 63006-06 782 OEM Part No. LP Part No. TINT PIPER continued 63070-15 491 63070-16 490 63070-26 492 63070-27 493 63070-29 491 SG 63070-30 490 SG 63070-41 491 SG 63070-42 490 SG 63070-45 491 63070-46 490 63072-00 408 63072-02 408 63072-04 408 SG 63073-00 052 63073-02 052 SG 64416-00 440 64774-00 442 64815-00 042 64818-00 043 64818-01 044 65631-04 791 65631-05 790 65642-02 778 65642-03 779 65642-04 780 65642-05 781 65739-00 157 SG 65745-00 155 65750-00 919 65798-00 157 65798-02 157 SG 65798-03 792 65798-04 792 SG 65798-05 594 SG 65825-00 920 65825-02 920 SG 65826-00 941.125 65826-03 941.125 SG 65826-05 793 65826-06 793 SG 65896-00 155 65896-02 155 SG 66848-04 782 SG 66849-02 790 SG 67368-00 786 67368-02 789 Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 2 2 26 6 6 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT PIPER continued 67368-03 786 SG 67369-00 787 67369-02 789 67369-03 787 SG 67379-00 783 67379-01 784 67379-02 785 67379-03 783 SG 67379-04 784 SG 68304-02 918 68305-00 921 68305-01 922 68305-02 921 SG 68305-03 922 SG 68306-00 923 68306-02 923 SG 68306-03 936 68306-04 936 SG 69220-08 492 SG 69220-09 493 SG 69220-22 925 SG 69220-23 927 SG 69220-24 925 69220-25 927 69704-00 931 69704-02 931 SG 69704-03 932 69704-04 932 SG 69705-00 933 69705-02 933 SG 69705-03 934 69705-04 934 SG 69706-00 942 69706-02 942 SG 69706-03 943 69706-04 943 SG 69707-00 937 69707-02 937 SG 69707-03 938 69707-04 938 SG 69712-00 929 69712-02 929 SG 69712-03 952 69712-04 952 SG 69713-00 992 69713-02 992 SG OEM Part No. LP Part No. TINT PIPER continued 69713-03 992 69713-04 992 SG 76150-02 903 SG 76150-04 903 76275-00 908 76275-02 908 SG 76275-03 909 76275-04 909 SG 76276-00 910 76276-02 910 SG 76276-03 911 76276-04 911 SG 76277-00 912 76277-02 912 SG 76277-03 913 76277-04 913 SG 76278-00 914 76278-02 914 SG 76278-03 915 76278-04 915 SG 76435-00 917 76435-02 917 SG 77408-03 795 77408-09 795 SG 77468-03 796 SG 77512-04 797 77512-05 799 77512-07 798 77512-14 797 SG 77512-15 799 SG 77512-17 798 SG 78271-03 926 78271-04 928 78271-05 926 SG 78271-06 928 SG 79040-00 939 79040-02 939 SG 79143-00 053 79143-02 053 SG 79143-03 055 79143-04 055 SG 79144-00 056 79144-02 056 SG 79144-03 057 79144-04 057 SG 79296-16 905 Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 2 2 27 7 7 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT PIPER continued 79296-17 907 79296-18 905 SG 79296-19 907 SG 79475-05 953 79475-20 955 79475-55 953 SG 79475-56 954 79475-57 954 SG 79475-58 955 SG 79475-59 956 79475-60 956 SG 84290-12 592 SG 84290-13 593 SG 85192-02 595 SG 85192-03 596 SG 85192-04 597 SG 85192-05 598 SG 86608-02 882 86608-03 882 86608-04 824 86608-05 824 SG 97406-00 896 SG 97406-01 897 SG 97407-00 898 SG 97407-01 899 SG 97508-00 895 97554-00 900 97935-02 761 97935-03 763 98351-00 901 SG 98351-01 902 SG 99046-00 159 SG 99069-00 924 99069-02 924 SG 99069-03 940 99069-04 940 SG ROCKWELL SEE GULFSTREAM AMERICAN SCHWEIZER A1390-35L 418 A1390-35R 418 A1390-37 419 A1395-103 279 DB A3390-15 419 A3390-135 418 A3390-136 418 OEM Part No. LP Part No. TINT SCHWEIZER continued A3390-137 418 A3390-138 418 A3391-1 049 GT A3391-3 049 A5391-1 292 GT 22H946-7 1501 26J-311-1A 1504 26311-005B 1504 26369-011P 1505 33325-1B 1500 33325-3T 1500 34-227027 1133 34-227027B 1136 34227R-13 1136 34227R-27 1134 35-2450155 1135 SIAI MARCHETTI 205-1-010-11 243 205-1-019 058 GT 205-1-020 059 GT 205-1-021 244 205-1-022 245 205-1-023-03 235 205-1-023-05 242 205-1-025-03 241 205-1-026-11 246 205-1-026-12 247 SNOW SEE AYRES SOCATA SEE AEROSPATIALE STINSON 108-1111091 549 108-3001211-58 537-1 108-3001211-64 537-2 108-3001212 555 108-3002208-6 552 108-3002208-7 553 108-3002211-30 537-3 108-3002211-32 537-4 108-3002212 587 SWIFT 11-210-2723 606/LGE 11-210-5013-2 606/SML 11-212-1337-1 601 Manufacturer's Part Number Cross Reference List Aircraft Windshields and Windows P P Pa a ag g ge e e 2 2 28 8 8 Toll Free: 800-957-2376 Fax: (724) 744-7372 Email: info@lpaero.com LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 OEM Part No. LP Part No. TINT SWIFT continued 11-212-1337-4 600 11-213-1220-1L 604 MB 11-213-1220-1R 605 MB 11-213-5052 602 11-213-5052 602 MB SDS-105-1 1428 SG SDS-105-2 1429 SG SDS-105-3 1427 SG TAYLORCRAFT 1551 650 BA700 651 TED SMITH AEROSTAR SEE PIPER TEMCO SEE SWIFT TIGER AIRCRAFT SEE GULFSTREAM AMERICAN TWIN COMMANDER AIRCRAFT CORP. SEE AERO COMMANDER VOLAIRE SEE GULFSTREAM AMERICAN VULCANAIR A-2.6019-1 LP-A-2.6019-1 A-2.6075-1 LP- A-2.6075-1 A-2.6751-1 LP-A-2.6751-1 A-2.6751-2 LP-A-2.6751-2 A-2.6751-3 LP-A-2.6751-3 SG A-2.6751-4 LP-A-2.6751-4 SG 2.6027-1 LP-2.6027-1 2.6027-2 LP-2.6027-2 2.6027-3 LP-2.6027-3 2.6043-1 LP-2.6043-1 2.6043-2 LP-2.6043-2 2.6043-3 LP-2.6043-3 2.6043-4 LP-2.6043-4 2.6043-5 LP-2.6043-5 2.6043-6 LP-2.6043-6 2.6047-1 LP-2.6047-1 2.6047-4 LP-2.6047-4 2.6057B-3 LP-2.6057B-3 2.6095-1 LP-2.6095-1 2.6095-2 LP-2.6095-2 OEM Part No. LP Part No. TINT VULCANAIR continued 2.6123-1 LP-2.6123-1 2.6123-2 LP-2.6123-2 2.6123-3 LP-2.6123-3 2.6147-1 LP-2.6147-1 2.6149-1 LP-2.6149-1 2.6151-1 LP-2.6151-1 2.6151-2 LP-2.6151-2 2.6153-1 LP-2.6153-1 2.6153-2 LP-2.6153-2 2.6169-1 LP-2.6169-1 2.6169-2 LP-2.6169-2 2.7096-008 LP-2.7096-008 2.7096-009 LP-2.7096-009 2.7096-401 LP-2.7096-401 2.7096-402 LP-2.7096-402 2.7097-3 LP-2.7097-3 2.7097-4 LP-2.7097-4 2.7097-5 LP-2.7097-5 2.7097-6 LP-2.7097-6 2.7098-008 LP-2.7098-008 2.7098-009 LP-2.7098-009 2.7098-010 LP-2.7098-010-GT GT 2.7098-010 LP-2.7098-010-SG SG 2.7098-011 LP-2.7098-011-GT GT 2.7098-011 LP-2.7098-011-SG SG 2.7098-401 LP-2.7098-401-CL 2.7098-402 LP-2.7098-402-CL 2.7098-403 LP-2.7098-403-GT GT 2.7098-403 LP-2.7098-403-SG SG 2.7098-404 LP-2.7098-404-GT GT 2.7098-404 LP-2.7098-404-SG SG 2.7099-1 LP-2.7099-1 68-2.6027-1 LP-2.6027-1 68-2.6027-2 LP-2.6027-2 68-2.6027-3 LP-2.6027-3 68-2.6043-1 LP-2.6043-1 68-2.6043-2 LP-2.6043-2 68-2.6047-1 LP-2.6047-1 68-2.6057B-3 LP-2.6057B-3 68-2.6095-1 LP-2.6095-1 68-2.6095-2 LP-2.6095-2 68-2.6123-1 LP-2.6123-1 68-2.6123-3 LP-2.6123-3 68-2.6151-1 LP-2.6151-1 68-2.6153-1 LP-2.6153-1 68-2.6153-2 LP-2.6153-2 Manufacturer's Part Number Cross Reference List P P Pa a ag g ge e e 2 2 29 9 9 Clear unless otherwise indicated GT=Green Tint SG=Solar Grey MG=Medium Grey DG=Dark Grey BZ=Bronze DB=Dark Bronze BL=Blue MB=Medium Blue UV-GT=UV Green Tint UV-SG=UV Solar Grey UV-DG=UV Dark Grey OEM Part No. LP Part No. TINT VULCANAIR continued 68-2.6169-1 LP-2.6169-1 NOR7.421-1 LP-NOR7.421-1 NOR7.421-2 LP-NOR7.421-2 YAK 52 520500-01 1656 520500-02 1657 520500-03 1658 520500-04 1659 520500-05 1660 520530-00 1661 520540-00 1662 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 30 0 0 Aircraft Windshields and Windows Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com LP# DESCRIPTION THICKNESS ACRO SPORT (EXPERIMENTAL) 122 Windshield .125 AERO COMMANDER (ROCKWELL) A9, A9A SPARROW A9B QUAIL 295 Windshield A-9B s/n 1360 thru 1615 s/n 5001 and up .125 296 Windshield A-9 s/n 1000 thru 1263 s/n 1265 thru 1615 A-9A s/n 1126 thru 1615, 1048 .125 AERO COMMANDER (ROCKWELL) 100 DARTER, LARK VOLAIRE 10 or 10A 621 621.187 Windshield Windshield .150 .187 622 623 620 Front door window - left or right Rear window - left or right Rear windshield .125 .125 .125 AERO COMMANDER 500, 520, 560, 560A, 560E, 680, 680E, 720 (COMMANDER AIRCRAFT) (GULFSTREAM AMERICAN) (ROCKWELL) (TWIN COMMANDER AIRCRAFT CORP) 630 631 Windshield - left Windshield - right .187 .187 635 636 632 Left front pilot window with vent cutout Vent window - left Right front copilot window with no vent cutout .187 .250 .187 639 Center double pane window - left or right 640 641 Nose landing light lens - right Nose landing light lens - left .060 .060 AERO COMMANDER 500A, 500B, 500U, 560F, 680F (COMMANDER AIRCRAFT) (GULFSTREAM AMERICAN) (ROCKWELL) (TWIN COMMANDER AIRCRAFT CORP) 630 631 Windshield - left Windshield - right .187 .187 635 636 Left front pilot window with vent cutout Vent window - left .187 .250 633 634 632 Right copilot window with vent cutout Vent window - right Right front copilot window with no vent cutout .187 .250 .187 639 637 638 Center double pane window - left or right Emergency exit double pane window Cabin door double pane window 640 641 Nose landing light lens - right Nose landing light lens - left .060 .060 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 31 1 1 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 LP# DESCRIPTION THICKNESS AERO COMMANDER 500S SHRIKE (COMMANDER AIRCRAFT) (GULFSTREAM AMERICAN) (ROCKWELL) (TWIN COMMANDER AIRCRAFT CORP) 630 631 Windshield - left s/n 1755 and up Windshield – right s/n 1755 and up .187 .187 637 Emergency exit double pane window - right s/n 1755 thru 3075 638 Cabin door double pane window - left s/n 1755 thru 1855 639 Center cabin double pane window - left or right s/n 1755 thru 3075 640 641 Nose landing light lens - right s/n 1755 thru 1876 Nose landing light lens - left s/n 1755 thru 1876 .060 .060 AERO COMMANDER 680FL s/n 1261 thru 1853 (COMMANDER AIRCRAFT) (GULFSTREAM AMERICAN) (ROCKWELL) (TWIN COMMANDER AIRCRAFT CORP) 776 777 Windshield - left Windshield - right .187 .187 635 Left front window with vent cutout .187 633 Right front window with vent cutout s/n 1261 thru 1853 .187 640 641 Nose landing light lens - right Nose landing light lens - left .060 .060 AERONCA (AMERICAN CHAMPION) 7AC, 7BCM, 7CCM, 7DC, 7EC, 7FC, 7GC, 7GCA, 7GCB, 7GCBA, 7HC, 7JC 202 Windshield -Original configuration - no wing root cutouts .125 231 232 234 233 Left front sliding window - forward Left front sliding window - rearward Right front door window Rear window - left or right .125 .125 .125 .080 AERONCA (AMERICAN CHAMPION) 7ACA 288 234 Skylight Right front door window .125 .125 AERONCA (AMERICAN CHAMPION) (BELLANCA) CITABRIA 7ECA, 7GCAA, 7GCBC, 7KCAB, SCOUT 8GCBC 192 192.150 Windshield Windshield .125 .150 288 Skylight .125 297 Left front swinging window - bubbled .080 231 232 Left front sliding window - forward Left front sliding window - rearward .125 .125 291 Right front door window - bubbled .080 289 290 Rear window - right - bubbled Rear window - left - bubbled .080 .080 AERONCA CHIEF (AMERICAN CHAMPION) 11AC, 11BC, 11CC, S11AC, S11BC, S11CC 205 Windshield .125 225 226 227 Door front sliding window - left or right Door rear sliding window - left or right Rear window - left or right .125 .125 .125 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 32 2 2 Aircraft Windshields and Windows Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com LP# DESCRIPTION THICKNESS AERONCA SEDAN 15AC 203 204 Windshield - left Windshield - right .125 .125 238 240 239 116 Left front cabin sliding window - forward Left front cabin sliding window - rearward Right front window Rear window - left or right .080 .080 .080 .080 AERONCA CHIEF 50-C SUPER CHIEF 65-C 200 Windshield - Supplied only after receipt of a paper template or original windshield from customer. .125 AERONCA SUPER CHIEF 65-CA 201 Windshield - Supplied only after receipt of a paper template or original windshield from customer. .125 AERONCA TANDEM 50-TL 60-TF, 65-TF, 65-TL, 65-TAC, 65-TAL GRASSHOPPER L-3 series, 0-58 series 206 Windshield .125 AEROSPATIALE TB 9, TB 10, TB 20, TB 21, TB 200 - SEE SOCATA AIR TRACTOR AT-300 s/n 300-0001 and up AT-301 s/n 301-0001 and up AT-302 s/n 302-0001 and up AT-400 s/n 400-0244 and up AT-400-A s/n 400A-0397 and up 077 080 Windshield Door window - left or right .187 .080 ALLIED AG CAT PRODUCTIONS – SEE SCHWEIZER ALON (UNIVAIR) AIRCOUPE A-2 s/n A-2 thru A-245 A2-A s/n B-246 thru B-297 870 871 Windshield - left Windshield - right .125 .125 874 Sliding canopy .125 872 873 Rear window with rub strips - left Rear window with rub strips - right .080 .080 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 33 3 3 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 LP# DESCRIPTION THICKNESS AMERICAN CHAMPION -SEE AERONCA, SEE BELLANCA AMERICAN GENERAL - SEE GULFSTREAM ARCTIC AIRCRAFT COMPANY - SEE INTERSTATE AURIGA (EXPERIMENTAL) 1480.250 1480.312 1480.375 Windshield Windshield Windshield .250 .312 .375 1481 1481WV 1482 1482WV Left door window Left door window with vent window installed Right door window Right door window with vent window installed .250 .250 .250 .250 1483 1484 Left rear window Right rear window .250 .250 AVID – MAGNUM (EXPERIMENTAL) 1300 1300.187 Windshield Windshield .125 .187 1301 1302 Left domed door window Right domed door window .125 .125 AVID – MARK IV (EXPERIMENTAL) 1365 1366 Left domed door window Right domed door window .125 .125 1367 Turtle Deck .125 AVIPRO AIRCRAFT, R & B AIRCRAFT – BEARHAWK (EXPERIMENTAL) 312.187BH 1663 Windshield - For plans built aircraft Windshield – For quick build kit .187 .187 1664 Left or right door window – 38” x 17” .125 1665 Left or right rear window – 24 x 15 ½” .125 1666 Left or right skylight – 24” x 13 1/3” .125 AVIPRO AIRCRAFT, R & B AIRCRAFT – Patrol (EXPERIMENTAL) 1667 Windshield .125 1668LT 1668RT 1669LT 1669RT Left domed front window - 1 ½” Dome Right domed front window - 1 ½” Dome Left domed rear window - 1 ½” Dome Right domed rear window - 1 ½” Dome .100 .100 .100 .100 AYRES (THRUSH AIRCRAFT, INC.) S2C and S2D 535 Windshield - for optional canopy .150 AYRES (THRUSH AIRCRAFT, INC.) THRUSH S-2R s/n 1380R, 1416R thru 4999R 013 014 Windshield - left or right Door window - left or right .125 .125 BEDE – 5 (EXPERIMENTAL) 1520 Front windshield/canopy .125 1521 Rear canopy .125 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 34 4 4 Aircraft Windshields and Windows Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com LP# DESCRIPTION THICKNESS BEECHCRAFT MUSKETEER 19 thru B19 s/n MB-1 thru MB-520 23 thru C23 s/n M-2 thru M-1361 24 thru A24 s/n MA-1 thru MA-368 A24R s/n MC-2 thru MC-95 SPORT 150 B19 s/n MB-521 and up SUNDOWNER 180 C23 s/n M-1362 and up SIERRA 200 A24R thru C24R s/n MC-96 and up 259 259.187 Windshield Windshield s/n M-2 thru M-1284 s/n MA-1 thru MA-363 s/n MB-1 thru MB-480 .150 .187 273 273.187 273.250 Windshield Windshield Windshield s/n M-1285 and up s/n MA-364 thru MA-368 s/n MB-481 and up s/n MC-2 and up .150 .187 .250 248 Left front pilot window s/n M-2 thru M-234 .125 264 Left front pilot window s/n M-235 thru M-554 (Optional on s/n M-2 thru M-234) .150 265 Left front pilot window s/n M-555 thru M-659 .187 114 Left front pilot window s/n M-660 thru M-1284 without pilot entry door s/n MA-1 thru MA-363 s/n MB-1 thru MB-480 .187 131 Left front pilot entry door window s/n M-1005 thru M-1284 s/n MA-153 thru MA-363 s/n MB-167 thru MB-480 .187 107 Left front pilot window s/n M-1285 thru M-1490 with or without pilot entry door s/n MA-364 thru MA-368 s/n MB-481 thru MB-621 s/n MC-2 thru MC-190 .150 108 Left front pilot window s/n M-1491 thru M-2233, except M-2224 with or without pilot entry door s/n MB-622 and up s/n MC-191 thru MC-701, except MC-689 .150 173 Left front pilot window s/n M-2224, M2234 and up s/n MC-689, MC-702 and up .150 272 Vent (storm) window s/n M-2 thru M-234 .187 278 Vent (storm) window s/n M-235 thru M-1284 s/n MA-1 thru MA-363 s/n MB-1 thru MB-480 .375 267 Vent (storm) window s/n M-1285 and up s/n MA-364 thru MA-368 s/n MB-481 and up s/n MC-2 and up .312 180 Right front cabin s/n M-2 thru M-1284 door window s/n MA-1 thru MA-363 s/n MB-1 thru MB-480 .187 266 Right front cabin s/n M-1285 thru M-1490 door window s/n MA-364 thru MA-368 s/n MB-481 thru MB-621 s/n MC-2 thru MC-190 .150 109 Right front cabin s/n M-1491 thru M-2233, except M-2224 door window s/n MB-622 and up s/n MC-191 thru MC-701, except MC-689 .150 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 35 5 5 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 LP# DESCRIPTION THICKNESS BEECHCRAFT MUSKETEER, SPORT 150, SUNDOWNER 180, SIERRA 200 continued 174 Right front cabin s/n M-2224, M-2234 and up door window s/n MC-689, MC-702 and up .150 175 #2 rear window - left or right s/n M-2 thru M-554 .150 176 177 #2 window - left* #2 window - right* * s/n M-555 thru M-1284 s/n MA-1 thru MA-363 s/n MB-1 thru MB-480 .187 .187 119 121 #2 window - left** #2 window - right** ** s/n M-1285 thru M-1490 s/n MA-364 thru MA-368 s/n MB-481 thru MB-621 s/n MC-2 thru MC-190 .150 .150 120 132 #2 window - left*** #2 window - right*** *** s/n M-1491 and up s/n MB-622 and up s/n MC-191 and up .150 .150 178 179 #3 rear window - left* #3 rear window - right* * s/n M-555 thru M-1284 s/n MA-1 thru MA-363 .150 .150 123 125 #3 window - left** #3 window - right** ** s/n M-1285 thru M-1490 s/n MA-364 thru MA-368 s/n MC-2 thru MC-190 .150 .150 124 126 #3 window - left*** #3 window - right*** *** s/n M-1491 and up s/n MC-191 and up .150 .150 112 #3 baggage door window - left s/n MC-151 thru MC-190 .150 113 #3 baggage door window - left s/n MC-191 and up, except MC-533 .150 127 129 #4 rear window - left* #4 rear window - right* * s/n M-1285 thru M-1979, except M-1971 s/n MA-364 thru MA-368 s/n MC-2 thru MC-190 .150 .150 128 130 #4 rear window - left s/n MC-191 and up #4 rear window - right s/n MC-191 and up .150 .150 274 Landing light lens s/n M-2 thru M-1979, except M-1971 s/n MA-1 thru MA-368 s/n MB-1 thru MB-865 s/n MC-2 thru MC-536 .080 274 Taxi light lens s/n M-1971, M-1980 and up s/n MB-866 and up s/n MC-537 and up .080 BEECHCRAFT BONANZA & DEBONAIR 33 thru G33 s/n CD-1 thru CD-1304 35-C33A thru F33A s/n CE-1 and up E33C thru F33C s/n CJ-1 and up 35 thru V35B-TC s/n D-1 and up 250 251 280 281 Windshield - left Windshield - right Windshield - left Windshield - right These windshields install using the original windshield frames. s/n CD-1 thru CD-1006 s/n D-1 thru D-7976 .187 .187 .250 .250 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 36 6 6 Aircraft Windshields and Windows Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com LP# DESCRIPTION THICKNESS BEECHCRAFT BONANZA & DEBONAIR 33 thru G33, 35-C33A thru F33A, E33C thru F33C, 35 thru V35B-TC continued 271.250 Windshield - STC One Piece Conversion .250 271.312 Windshield - STC One Piece Conversion .312 271.375 Windshield - STC One Piece Conversion These windshields install using the original two piece windshield frames. s/n CD-1 thru CD-1006 s/n D-1 thru D-7976 .375 270 Windshield - Original thickness .250 270.312 Windshield - STC .312 270.375 Windshield - STC .375 270.500 Windshield - STC These windshields install using the original windshield frames. s/n CD-1007 thru CD-1118 s/n CE-1 thru CE-179 s/n D-7977 thru D-8598 .500 998 Windshield - One Piece replacement when frame has been previously eliminated via STC SA358WE .250 The center face of the installed windshield measures 31 1/4" top to bottom. s/n CD-1 thru CD-1118 s/n CE-1 thru CE-179 s/n D-1 thru D-8598 977 Windshield - STC -Sloped frameless windshield eliminates the original frame. .250 977.312 Windshield - STC -Extra thick, sloped frameless windshield eliminates the original frame. .312 977.375 Windshield - STC -Extra thick, sloped frameless windshield eliminates the original frame. .375 977.500 Windshield - STC -Extra thick, sloped frameless windshield eliminates the original frame. The center face of the windshield measures 37” top to bottom s/n CD-1 thru CD-1118 s/n CE-1 thru CE-179 s/n D-1 thru D-8598 The following parts are required for new installations of the 977 series windshield: .500 D0002-001 Front windshield aluminum retainer D0004-001 Defroster duct outlet adapter - may need 1 or 2 - check your aircraft installation D0003-001 Defroster diffuser D0005-001 Glareshield SP-IK977 Installation kit for 977 - Hardware, sealant and instructions 269 Windshield - Original thickness .250 269.312 Windshield - STC - Inside surface edge milled to .250" thickness .312 269.375 Windshield - STC - Inside surface edge milled to .250" thickness .375 269.500 Windshield - STC - Inside surface edge milled to .250" thickness These windshields install using the original windshield frames. s/n CD-1119 thru CD-1304 s/n CE-180 and up s/n CJ-1 and up s/n D-8599 and up .500 981 Windshield - STC - screws through edge of acrylic .250 981.312 Windshield - STC - screws through edge of acrylic .312 981.375 Windshield - STC - screws through edge of acrylic .375 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 37 7 7 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 LP# DESCRIPTION THICKNESS BEECHCRAFT BONANZA & DEBONAIR 33 thru G33, 35-C33A thru F33A, E33C thru F33C, 35 thru V35B-TC continued 981.500 Windshield - STC - screws through edge of acrylic These are frameless windshields that eliminate the original metal frame around the windows and require drilling through the acrylic to mount. s/n CD-1119 thru CD-1304 s/n CE-180 and up s/n CJ-1 and up s/n D-8599 and up .500 SP-IK981 Installation kit for 981 - Hardware, sealant and instructions 252 Left front pilot window .125 252.250 252.375 Left front pilot window - STC Left front pilot window - STC .250 .375 258 Vent window - use with 252 .125 258.250 Vent window - use with 252.250 - STC These windows install using the original window frames. s/n CD-1 thru CD-1234 s/n CE-1 thru CE-289 s/n CJ-1 thru CJ-25 s/n D-1 thru D-9068 .250 211 Left front pilot window .250 211.375 Left front pilot window – STC .375 211WV Left front pilot window assembly with vent window installed - STC .250 211.375WV Left front pilot window assembly with vent window installed - STC .375 188 Vent (storm) window – use with 211 .375 188.500 Vent (storm) window - use with 211.375 - STC These windows install using the original window frames. s/n CD-1235 thru CD-1304 s/n CE-290 and up s/n CJ-26 and up s/n D-9069 and up .500 978 Left front side window with frameless vent cutout - STC .250 978.375 Left front side window with frameless vent cutout - STC .375 978WV Left front side window assembly with vent window installed - STC .250 978.375WV Left front side window assembly with vent window installed - STC .375 187 Vent (storm) window - left - use with 978 - STC .375 187.500 Vent (storm) window - left - use with 978.375 - STC These are frameless windows that eliminate the original metal frame around the windows and require drilling through the acrylic to mount. We do not recommend this installation if the shoulder harness is riveted through the window mounting frame. s/n CD-1 thru CD-1304 s/n CE-1 and up s/n CJ-1 and up s/n D-1 and up .500 SP-IK978 Installation kit for 978, 979, 980, 991, and 997 - Hardware, sealant and instructions 253 Right front door window .125 253.250 Right front door window - STC .250 253.375 Right front door window - STC .375 230.250 Right front door window with frameless vent cutout - STC .250 230.375 Right front door window with frameless vent cutout - STC .375 230.250WV Right front door window assembly with vent window installed - STC .250 230.375WV Right front door window assembly with vent window installed - STC .375 210 Vent (storm) window - right - use with 230.250 - STC .375 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 38 8 8 Aircraft Windshields and Windows Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com LP# DESCRIPTION THICKNESS BEECHCRAFT BONANZA & DEBONAIR 33 thru G33, 35-C33A thru F33A, E33C thru F33C, 35 thru V35B-TC continued 210.500 Vent (storm) window - right - use with 230.375 - STC These windows install using the original window frames. s/n CD-1 thru CD-1304 s/n CE-1 thru CE-632 s/n CJ-1 and up s/n D-1 thru D-9855, except D-9819 .500 980 Right front door window - STC .250 980.375 Right front door window - STC .375 979 Right front door window with frameless vent cutout - STC .250 979.375 Right front door window with frameless vent cutout - STC .375 979WV Right front door window assembly with vent window installed - STC .250 979.375WV Right front door window assembly with vent window installed - STC .375 189 Vent (storm) window - right - use with 979 - STC .375 189.500 Vent (storm) window - right - use with 979.375 - STC These are frameless windows that eliminate the original metal frame around the windows and require drilling through the acrylic to mount. s/n CD-1 thru CD-1304 s/n CE-1 thru CE-632 s/n CJ-1 and up s/n D-1 thru D-9855, except D-9819 .500 SP-IK978 Installation kit for 978, 979, 980, 991, and 997 - Hardware, sealant and instructions 294 Right front door window .125 294.250 Right front door window - STC .250 294.375 Right front door window - STC .375 287.250 Right front door window with frameless vent cutout - STC .250 287.375 Right front door window with frameless vent cutout - STC .375 287.250WV Right front door window with frameless vent window installed - STC .250 287.375WV Right front door window with frameless vent window installed - STC .375 210 Vent (storm) window - right - use with 287.250 - STC .375 210.500 Vent (storm) window - right - use with 287.375 - STC These windows install using the original window retainers. s/n CE-633 and up s/n D-9819, D-9856 and up .500 991 Right front door window - STC .250 991.375 Right front door window - STC .375 997 Right front door window with frameless vent cutout - STC .250 997.375 Right front door window with frameless vent cutout - STC .375 997WV Right front door window assembly with vent window installed - STC .250 997.375WV Right front door window assembly with vent window installed - STC .375 189 Vent (storm) window – right - use with 997 - STC .375 189.500 Vent (storm) window - right - use with 997.375 - STC These are frameless windows that eliminate the original metal frame around the windows and require drilling through the acrylic to mount. s/n CE-633 and up s/n D-9819, D-9856 and up .500 SP-IK978 Installation kit for 978, 979, 980, 991, and 997 - Hardware, sealant and instructions 140 Center window - left – nonopenable .125 140.187 140.250 Center window - left – nonopenable - STC Center window - left - nonopenable - STC .187 .250 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 3 3 39 9 9 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 LP# DESCRIPTION THICKNESS BEECHCRAFT BONANZA & DEBONAIR 33 thru G33, 35-C33A thru F33A, E33C thru F33C, 35 thru V35B-TC continued 141 Center window - right - nonopenable .125 141.187 141.250 Center window - right - nonopenable – STC Center window - right - nonopenable – STC s/n CD-1 thru CD-1304 (If openable use next listing) s/n CE-1 thru CE-315 (If openable use next listing) s/n CJ-1 thru CJ-51 (If openable use next listing) s/n D-9069 thru D-9286 (If openable use next listing) .187 .250 254 Center or rear window – left - openable .125 254.250 Center or rear window – left - openable - STC .250 255 Center or rear window - right - openable .125 255.250 Center or rear window - right - openable - STC s/n CD-1119 thru 1304 s/n CE-180 and up s/n CJ-26 and up s/n D-1 and up .250 256 Rear baggage window – left .125 257 Rear baggage window - right s/n CD-1 thru CD-813 s/n D-3999 thru D-6561 .125 284 Rear window - left .125 284.250 Rear window - left - STC .250 285 Rear window - right .125 285.250 Rear window - right - STC s/n CD-814 thru CD-1304 s/n CE-1 and up s/n CJ-1 and up s/n D-6562 and up .250 286 Landing light lens - left or right s/n D-1 thru D-4865 .080 298 299 Landing light lens - left Landing light lens - right s/n D-4866 thru D-6841 .080 .080 BEECHCRAFT BONANZA 35 thru V35B-TC s/n D-1 and up SEE BEECHCRAFT 33 BEECHCRAFT BONANZA 36 thru A36 s/n E-1 and up A36TC thru B36TC s/n EA-1 and up BARON 58 and 58A s/n TH-1 and up TC58 and 58TCA s/n TK-1 and up 269 Windshield - Original thickness .250 269.312 Windshield - STC - Inside surface edge milled to .250" thickness .312 269.375 Windshield - STC - Inside surface edge milled to .250" thickness .375 269.500 Windshield - STC - Inside surface edge milled to .250" thickness These windshields install using the original windshield frames. .500 981 Windshield - STC – screws through edge of acrylic .250 981.312 Windshield - STC – screws through edge of acrylic .312 981.375 Windshield - STC – screws through edge of acrylic .375 981.500 Windshield - STC - screws through edge of acrylic These are frameless windshields that eliminate the original metal frame around the windows and require drilling through the acrylic to mount. .500 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 4 4 40 0 0 Aircraft Windshields and Windows Toll Free: 800-957-2376 Phone: (724) 744-4448 Fax: (724) 744-7372 Email: info@lpaero.com LP# DESCRIPTION THICKNESS BEECHCRAFT BONANZA 36 thru A36, A36TC thru B36TC, BARON 58 and 58A, TC58 and 58TCA continued SP-IK981 Installation kit for 981 Hardware, sealant and instructions 252 Left front pilot window .125 252.250 252.375 Left front pilot window - STC on 36 models, factory option on 58 models Left front pilot window .250 .375 258 Vent window - use with 252 .125 258.250 Vent window - use with 252.250 - STC on 36 models, factory option on 58 models These windows install using the original window frames. s/n E-1 thru E-184 .250 211 Left front pilot window .250 211.375 Left front pilot window - STC .375 211WV Left front pilot window assembly with vent window installed - STC .250 211.375WV Left front pilot window assembly with vent window installed - STC .375 188 Vent (storm) window – use with 211 .375 188.500 Vent (storm) window - use with 211.375 - STC These windows install using the original window frames. s/n E-185 and up s/n EA-1 and up s/n TH-1 and up s/n TK-1 and up .500 978 Left front side window with frameless vent cutout - STC .250 978.375 Left front side window with frameless vent cutout - STC .375 978WV Left front side window assembly with vent window installed - STC .250 978.375WV Left front side window assembly with vent window installed - STC .375 187 Vent (storm) window - left - use with 978 - STC .375 187.500 Vent (storm) window - left - use with 978.375 - STC These are frameless windows that eliminate the original metal frame around the windows and require drilling through the acrylic to mount. We do not recommend this installation if the shoulder harness is riveted through the window mounting frame. s/n E-1 and up s/n EA-1 and up s/n TH-1 and up s/n TK-1 and up .500 SP-IK978 Installation kit for 978, 979, 980, 991, and 997 - Hardware, sealant and instructions 253 Right front door window .125 253.250 Right front door window - STC on 36 models, factory option on 58 models .250 253.375 Right front door window - STC .375 230.250 Right front door window with frameless vent cutout - STC .250 230.375 Right front door window with frameless vent cutout - STC .375 230.250WV Right front door window assembly with vent window installed - STC .250 230.375WV Right front door window assembly with vent window installed - STC .375 210 Vent (storm) window - right - use with 230.250 - STC .375 210.500 Vent (storm) window - right - use with 230.375 - STC These windows install using the original window frames. s/n E-1 thru E-830, except E-754 s/n TH-1 thru TH-732 s/n TK-1 thru TK-4 .500 980 Right front door window - STC .250 980.375 Right front door window - STC .375 979 Right front door window with frameless vent cutout - STC .250 979.375 Right front door window with frameless vent cutout - STC .375 Aircraft Listing by Make, Model & Serial Number P P Pa a ag g ge e e 4 4 41 1 1 LP Aero Plastics 1086 Boquet Road Jeannette, PA 15644-4707 LP# DESCRIPTION THICKNESS BEECHCRAFT BONANZA 36 thru A36, A36TC thru B36TC, BARON 58 and 58A, TC58 and 58TCA continued 979WV Right front door window assembly with vent window installed - STC .250 979.375WV Right front door window assembly with vent window installed - STC .375 189 Vent (storm) window - right - use with 979 - STC .375 189.500 Vent (storm) window - right - use with 979.375 - STC These are frameless windows that eliminate the original metal frame around the windows and require drilling through the acrylic to mount. s/n E-1 thru E-830, except E-754 s/n TH-1 thru TH-732 s/n TK-1 thru TK-4 .500 SP-IK978 Installation kit for 978, 979, 980, 991, and 997 – Hardware, sealant and instructions 294 Right front door window .125 294.250 Right front door window - STC on 36 models, factory option on 58 models .250 294.375 Right front door window - STC .375 287.250 Right front door window with frameless vent cutout - STC .250 287.375 Right front door window with frameless vent cutout - STC .375 287.250WV Right front door window with frameless vent window installed - STC .250 287.375WV Right front door window with frameless vent window installed - STC .375 210 Vent (storm) window - right - use with 287.250 - STC .375 210.500 Vent (storm) window - right - use with 287.375 - STC These windows install using the original window retainers. s/n E-754, E831 and up s/n EA-1 and up s/n TH-733 and up s/n TK-5 and up .500 991 991.375 997 997.375 997WV 997.375WV 189 189.500 SP-IK978 Right front door window - STC Right front door window - STC Right front door window with frameless vent cutout - STC Right front door window with frameless vent cutout - STC Right front door window assembly with vent window installed - STC Right front door window assembly with vent window installed - STC Vent (storm) window - right - use with 997 - STC Vent (storm) window - right - use with 997.375 - STC These ar