Beechcraft A36TC Bonanza — Wiring Diagram

This document provides an installation example for the Enhanced Flight Model BM-AIK Airframe Interface Kit designed for the BatteryMINDer® Maintenance Charger in the Beechcraft A36 Bonanza. It supplements the instructions for the BM-AIK1 or BM-AIK2 charger harness kit, detailing the steps necessary to connect the charger to the aircraft's electrical system. The guide is intended for technicians or pilots who are familiar with aircraft electrical systems and need to install the maintenance charger correctly. It emphasizes safety precautions and the importance of following the manufacturer's instructions while adapting the installation to the specific configuration of the aircraft.

• Ensure Battery Master switch is OFF before installation.
• Identify hot side of the fuse block with a voltmeter, expecting 24+ volts.
• Use a 0.20" spacer for clearance when mounting the SB50 plug.
• Test voltage and polarity at the SB50 plug with aircraft power OFF after installation.
• Document the installation in the airframe maintenance logbook.