Skip to main content

Beechcraft V35B Bonanza — Weight And Balance

2 weight and balance references for the Beechcraft V35B Bonanza.

Overview
Airworthiness Directives; Raytheon Aircraft Company Beech Models C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, P35, S35, V35, V35A and V35B Airplanes · 2002

This document is an Airworthiness Directive (AD) issued by the Federal Aviation Administration (FAA) that addresses safety concerns regarding the V-tail structure of certain Beechcraft models, including the V35B Bonanza. The AD outlines mandatory inspections and modifications to prevent structural failures that could lead to loss of control of the aircraft. It specifically targets the ruddervator system and requires operators to verify the balance of the ruddervators, inspect the empennage and aft fuselage for damage, and ensure the accuracy of weight and balance information. Compliance with these directives is crucial for maintaining airworthiness and safety in flight operations.

  • This AD affects multiple Beechcraft models, including the V35B.
  • Operators must verify ruddervator balance and inspect for damage.
  • Compliance is required within 100 hours of flight time after the effective date.
  • The estimated cost for initial inspections is $2,400 per airplane.
  • The AD is effective from December 10, 2002.
2 documents