SP 1500 SERIES Specifications

8335 4.7 Overhead Guard Height h6 in mm 86 2330 86 2190 86 2190 86 2330 4.14 Operator Stand Height Raised h12 in mm 4.21 Overall Width Front/rear b2 in mm 4.21a Overall Width Operator platform in mm 220 42/42 42 5588 201 5105 216 5486 246 6248 1065/1065 42/42 1065/1065 42/42 1065/1065 42/42 1065/1065 4.27 Width Across Guide Rollers In 6.5 mm increments b6 in mm 45.5 to 65.25 1065 1156 to 42 1658 45.5 to 65.25 1065 1156 to 42 1065 1658 45.5 to 65.25 1156 to 1658 42 45.5 to 1065 65.25 1156 to 1658 TABLE 2 - SP1510 Standard Straddle TT Mast 4.2 Mast Collapsed height h1 in mm 119 3025 125 3175 131 3330 143 3635 4.3 Free Lift h2 in mm 27 685 33 840 39 1135 51 1295 4.4 Lift Height h3 in mm 276 7010 294 7465 312 7920 330 8380 4.5 Mast Extended height h4 in mm 364 9250 382 9705 400 10160 418 10620 4.7 Overhead Guard Height h6 in mm 86 2330 4.14 Operator Stand Height Raised h12 in mm 4.21 Overall Width Front/rear b2 in mm 4.21a Overall Width Operator platform in mm 4.27 Width Across Guide Rollers In 6.5 mm increments b6 in mm 282 48/48 48 48.75 to 71.25 86 7162 300 1220/1220 54/54 2330 86 2330 86 2330 7620 318 1375/1375 54/54 1220 1238 to 1809 54 54.75 to 77.25 1375 1390 to 1962 54 54.75 to 77.25 1375 1390 to 1962 8077 336 1375/1375 54/54 54 56.75 to 79.25 8534 1375/1375 1375 1441 to 2013 TT Mast 4.2 Mast Collapsed height h1 in mm 149 3785 155 3935 161 4090 171 4345 4.3 Free Lift h2 in mm 57 1450 63 1600 69 1755 79 2005 4.4 Lift Height h3 in mm 348 8835 366 9295 384 9750 402 10210 4.5 Mast Extended height h4 in mm 436 11075 454 11535 473 12015 490 12450 4.7 Overhead Guard Height h6 4.14 Operator Stand Height Raised h12 4.21 Overall Width Front/rear b2 in mm in mm in mm 4.21a Overall Width Operator platform in mm 4.27 Width Across Guide Rollers In 6.5 mm increments b6 in mm 86 354 60/60 60 60.75 to 83.25 2330 1525 1543 to 2115 86 8991 372 1525/1525 60/60 60 60.75 to 83.25 1525 1543 to 2115 2330 86 9449 390 1525/1525 64/64 64 64.75 to 87.25 1625 1645 to 2216 2330 86 9906 408 1625/1625 64/64 1625/1625 64 64.75 to 2330 10363 1625 1645 to 87.25 2216 TABLE 3 - SP1510 Narrow Straddle SP 1510 Fixed Fork Specifications TT Mast 4.2 Mast Collapsed height h1 4.3 Free Lift རྔ|c in mm 125 3175 131 3330 143 3635 149 3785 155 3935 h2 in mm 33 840 39 990 51 1295 57 1450 63 1600 4.4 Lift Height 4.5 Mast h3 in mm 294 7465 312 7920 330 8380 348 8835 366 9295 Extended height h4 in mm 382 9705 400 10160 418 10620 436 11075 454 11535 4.7 Overhead Guard Height h6 4.14 Operator Stand Height 4.21 Overall Width 4.21a Overall Width Raised in mm h12 in mm 86 2330 86 2330 86 2330 86 2330 86 2330 Front/rear b2 in mm Operator platform in mm 300 48/48 48 7620 318 8077 336 8534 354 8991 372 9449 1220/1220 48/48 1220 48 48 1220 48.75 1238 48.75 48.75 1238 56.75 1220/1220 48/48 1220/1220 54/54 1375/1375 54/54 1375/1375 1220 54 1238 1375 54 54 1375 4.27 Width Across Guide Rollers In 6.5 mm b6 90 in mm to to to increments 71.25 1809 71.25 to 1809 to 71.25 to 1809 to 79.25 1440 to 2013 56.75 1440 to to 79.25 2013 TABLE 4 - Travel Speeds Standard Straddle <240" (6095 mm) Lift Height and All Narrow Straddle Lift Heights Steered Wheel < 12 degrees Power Unit First (PUF) Travel Speed Empty/Loaded High Capacity Standard Straddle Lift Heights > = 240" (6095 mm) Steered Wheel < 12 degrees Power Unit First (PUF) Travel Speed Empty/Loaded Imperial Metric Fork Height (in) 0-24 mph 7.5 Fork Height (mm) 0-610 km/h Imperial Fork Height (in) Metric 12 0-24 mph 7.5 Fork Height (mm) 0-610 km/h 24-40 7.5-6.9 610-1016 12.0-11.1 24-40 7.5-7.1 610-1016 12 12.0-11.4 40-64 6.9-6.0 1016-1625 11.1-9.6 40-64 7.1-6.5 1016-1625 11.4-10.5 64-120 6.0-3.8 1625-3048 9.6-6.0 64-120 6.5-4.5 1625-3048 10.5-7.2 120-152 3.8-2.7 3048-3861 6.0-4.3 120-152 4.5-3.4 3048-3861 7.2-5.5 152-176 2.7-1.5 3861-4470 4.3-2.4 152-176 3.4-2.6 3861-4470 5.5-4.2 176-192 1.5 4470-4877 2.4 176-192 2.6-2.2 4470-4877 4.2-3.5 192-216 1.5 4877-5486 2.4 192-216 2.2-1.5 4877-5486 3.5-2.4 216-max 1.5 5486-max 2.4 216-max 1.5 5486-max 2.4 (1) Top travel speed is reduced to 80% at a 12° steering angle, beyond 12° travel speeds gradually reduce down to 50% of top travel speed. Steering angle is automatically limited to within 12° straight travel as indicated below: • Standard Capacity above 192" (4877 mm) (2) For guided trucks, from 0-60 inches (0-1524 mm), travel speeds in the Forks First (FF) direction of travel are approximately 0.5 mph (0.8 km/h) less than travel speeds in the Power Unit First (PUF) direction. Forks First travel for non-guided trucks will be limited to a max travel speed of 5.5 mph (8.9 kmp) СЛОШП ProximityAssist System 40" (1016mm) 4.35 SP 1520 Aux Lift Stockpicker Ø 4" x 2" (100 x 50 mm) Ø 4" x 2" (100 x 50 mm) Turning Radius Increase by 5" (127 mm) 4.5 4.2 ProximityAssist System 11.6" (295.1 mm) -- 6.1" (155 mm) 5.9" (149.3 mm) 013" x 5.5" 2" (51mm) (330 x 140 mm) 1.9 9.4"- (240 mm) 4.20 1000 Poly Wheels: 02.5" x 2" (64 x 51 mm) when 22 is less than 20 +8.5 (216 mm) 04" x 2" (102 x 51 mm) when 22 is less than 20 +8.5 (203 mm) 000 7.9-33" (200-840 mm) 4.27 4.21 34.5" (876 mm) 000 4 in (102 mm) with standard capacity 5.5 in (140 mm) with high capacity when 4.4 is 348" (8840 mm) or less 8 in (203 mm) with high capacity when 4.4 is greater than 348 in (8840 mm) -24" (609.6mm) 24" (609.6mm) 4.22 4.4 78" (1981.242 mm) 4.7 -10" (260 mm) 9.46" (240.4 mm) -2.5" -1.5" (68.6mm) (38.1 mm) ¯Ø 6" x 2.75" (152 x 70 mm) capacity, poly load wheel 06" x 4.25" (152 x 108 mm) with lift height of 276" (701 mm) or greater SP 1520 Aux Lift Imperial Specifications Metric Distinguishing Mark 1.1 Manufacturer 1.2 Model 1.3 Power Source 1.4 Operator Type Crown Equipment Corporation SP 1520 Electric Volt 24/36/48 Stockpicker Weight Tires/Wheels/ Chassis Front Rear Number Front/Back (x=Driven) h1 in/mm h2 in/mm 1.5 Rated Capacity* 1.6 Load Center 00 lbs/kg 2,200 1000 C in/mm 24 600 1.8 Load Distance Battery Compartment 1.9 Wheelbase X in/mm 13 336 B C D E B с D E TL y in/mm 52 54 56 59 1320 1380 1420 1490 TT y in/mm 51 54 55 58 1305 1360 1405 1470 2.1 Service Weight** Less Battery lbs/kg 6,845 6,702 6,724 6,768 3105 3040 3050 3070 2.2 Axle Load** 6,391/ W. Load, Front/Rear lbs/kg 18,777 2.3 Axle Load** W.O. Load, Front/Rear lbs/kg 10,342/ 9,967 6,762/ 7,271/ 7,736/ 18,918 19,145 19,361 10,554/ 10,957/ 11,263/ 10,265 10,598 10,975 4521 2899/ 3067/ 3298/ 3509/ 8517 8581 8684 8782 4691/ 4787/ 4970/ 5109/ 4656 4807 4978 3.1 Tires polyurethane 3.2 Tire Size 3.3 Tire Size 3.5 Wheels 4.2 Mast Collapsed Height 4.3 Free Lift in/mm in/mm 06 x 2.75*** 0 152 x 70 *** Ø 13 x 5.5 0 330 x 140 4/1x 4.4 Lift Height h3 in/mm see table 1 and 2 4.5 Mast Extended Height h4 in/mm 4.7 Overhead Guard Height h6 in/mm 4.8 Stand Height Lowered h7 in/mm 9.45 240 4.14 Stand Height Elevated h12 in/mm see table 1 and 2 Dimensions 4.15 Fork Height Lowered h13 in/mm 3 75.5 4.20 Head Length TL 12 in/mm 84 86 88 90 2125 2185 2225 2290 TT 12 in/mm 85 87 88 91 2145 2200 2245 2310 4.21 Overall Width Front/Rear b1/b2 in/mm see table 1 and 2 4.21a Overall Width Operator Platform b9 in/mm 4.22 Fork Dimensions 4.25 Fork Spread 4.27 Width Across Guide Roller 4.31 Ground Clearance 4.35 Turning Radius 5.1 Travel Speed 5.2 Lift Speed Standard LxWxT in/mm 45x4x1.5 1145x102x38 Optional Length in/mm 30,36,39,42,48 Min. - Max. b5 in/mm 8.0-33 760/915/990/1070/1220 205-840 In .25" Increments b6 in/mm see table 1 and 2 With Load Below Mast m1 in/mm 2 51 TL Wa in/mm 70 72 TT Wa in/mm 69 72 22 74 77 1780 1835 1875 1945 73 76 1760 1815 1855 1925 w./w.o. load mph/kph see table 3 24V w./w.o. load fpm - m/s 43/71 0.22/0.36 36V w./w.o. load fpm - m/s 85/115 0.43/0.58 36V Optional 48V w./w.o. load fpm - m/s 85/130 0.43/0.66 w./w.o. load fpm - m/s 98/140 0.50/0.71 Performance Data 5.3 Lowering Speed 24V w./w.o. load fpm - m/s 80/80 0.41/0.41 36V w./w.o. load fpm - m/s 80/80 0.41/0.41 48V w./w.o. load fpm - m/s 80/80 0.41/0.41 24v Optional fpm - m/s 110+ 0.56 + 36v Optional fpm - m/s 205 + 1.04 + 48v Optional fpm - m/s 205 + 1.04 + Aux Mast Travel Speed w./w.o. load mph/kmh Std Aux Mast Lift Speed w./w.o. load fpm - m/s 39.4 39.4 39.4 39.4 0.2 0.2 0.2 0.2 Aux Mast Lower Speed w./w.o. load fpm - m/s 18.7 18.7 18.7 18.7 0.095 0.095 0.095 0.095 5.10 Service Brake regenerative 5.11 Parking Brake electro-magnetic 6.1 Traction Motor 24v 60 min. rating HP/KW 5.2 3.9 36v 60 min. rating HP/KW 6.4 4.8 48v 60 min. rating HP/KW 6.4 4.8 Electric Motor 6.2 Pump Motor 24v 15% on time HP/KW 20 15 36v 15% on time HP/KW 20 15 48v 15% on time HP/KW 20 15 6.3 Max. Battery Box Size LxWxH in/mm 38.4 x 14.25 x 31 38.4 x 16.25 x 31 38.7 x 18.2 x 31 38.7 x 20.75 x 31 976 x 362 976 x 413 X 787 X 787 983 x 462 983 x 527 X 787 X 787 6.4 Battery Voltage 6.5 Battery Weight 24v 36v and 48v max amp minimum minimum V Ah 24/36/48 1,690/1,240/930 lbs/kg 1,520 lbs/kg 1,700 2,000 2,280 2,600 690 775 910 1035 1180 8.1 Drive Unit AC traction *Max Capacity: 1250 kg (2755 lb) for Collapsed Heights up to 4090 mm (161 in) 1100 kg (2420 lb) for Collapsed Heights greater than 4090 mm (161 in) and up to 4345 mm (171 in) ** Value shown with TT mast 6905 mm (272 in) lift height, 2720 mm (107 in) collapsed height, 1220 mm (48 in) overall width and platform width. *** Ø 152 x 108 mm (6 x 4.25 in) if max lift height [4.4] is 885 mm (271 in) or greater. † 1.04 m/s (205 fpm) if weight is < 680 kg (1500 lb) If weight is > 680 kg (1500 lb), lower speed linearly decreases based on measured weight (at 1135 kg (2500 lb) lower speed is 0.56 m/s (110 fpm) TABLE 1 - SP1520 Standard Straddle SP 1520 Aux Lift Specifications TL Mast 4.2 Mast Collapsed height h1 in mm 91 2315 95 2415 107 2720 119 3025 4.3 Free Lift 4.4 Lift Height h2 in mm 34.5 875 37.5 950 37.5 950 37.5 950 h3 in mm 167 4240 179 4545 203 5155 225 5715 4.5 Mast Extended height h4 4.7 Overhead Guard Height h6 16 in mm 224 5690 236 5995 260 6605 282 7165 in mm 88 2240 88 2240 94 2380 94 2380 4.14 Operator Stand Height Raised h12 in mm 142 3605 154 3910 178 4.21 Overall Width Front/rear b2 in mm 42/42 1065/1065 42/42 4.21a Overall Width Operator platform in mm 42 1065 42 1065 1065/1065 42/42 42 4520 1065/1065 1065 200 42/42 42 5080 1065/1065 1065 4.27 Width Across Guide Rollers In 6.5 mm increments b6 in mm 42.9 to 65.4 1090 to 42.9 to 1090 to 42.9 to 1090 to 42.9 to 1090 to 1661 65.4 1661 65.4 1661 65.4 1661 TL Mast TT Mast 4.2 Mast Collapsed height h1 in mm 131 3330 91 2315 95 2415 107 2720 4.3 Free Lift h2 in mm 37.5 950 34 830 38 965 45 1145 4.4 Lift Height h3 in mm 245 6220 227 5765 242 6145 272 6905 4.5 Mast Extended height h4 in mm 302 7675 284 7215 299 7595 329 8360 4.7 Overhead Guard Height h6 in mm 94 2380 88 2240 88 2240 94 2380 4.14 Operator Stand Height Raised h12 4.21 Overall Width Front/rear b2 4.21a Overall Width Operator platform in mm in mm in mm 4.27 Width Across Guide Rollers In 6.5 mm increments b6 in mm 220 42/42 42 42.9 to 65.4 5590 202 1065/1065 42/42 1065 1090 to 1661 42 42.9 to 65.4 1065 1090 to 1661 5130 217 1065/1065 42/42 42 42.9 to 65.4 1065 1090 to 1661 5510 1065/1065 48/48 48 48.8 to 71.3 247 6260 1220/1220 1220 1238 to 1809 TABLE 2 - SP1520 Standard Straddle TT Mast 4.2 Mast 4.3 Free Lift 4.4 Lift Height 4.5 Mast Collapsed height h1 in mm h2 in mm h3 in mm Extended height h4 4.7 Overhead Guard Height 4.14 Operator Stand Height Raised h6 4.21 Overall Width Front/rear b2 in mm 4.21a Overall Width Operator platform SSSSSSSS 119 3025 125 3175 131 3330 143 3635 149 3785 57 1445 63 1600 69 1750 81 2055 87 2205 308 7820 326 8280 344 8735 362 9190 380 9650 in mm 365 9275 383 9730 401 10190 419 10645 437 11100 in mm 94 2380 94 2380 94 2380 94 2380 94 2380 h12 in mm 283 301 7645 in mm 4.27 Width Across Guide Rollers In 6.5 mm increments b6 in mm 1375 1389 to 1961 54 54.7 to 77.2 1375 1389 to 1961 7188 54/54 1375/1375 54/54 1375/1375 56/56 1425/1425 60/60 1525/1525 54 54.7 to 77.2 319 8100 337 8550 355 9015 60/60 1525/1525 54 56.7 to 79.2 1375 1440 to 2012 60 1525 60 60 1525 60.8 to 83.3 1544 to 2116 60.8 to 83.3 1544 to 2116 TABLE 3 - Travel Speeds Standard and Narrow Straddle Steered Wheel < 12 degrees Power Unit First (PUF) Travel Speed Empty/Loaded Imperial Metric Fork Height (in) mph Fork Height (mm) km/h 0-24 7.5 0-610 12.0 24-40 7.5 610-1016 12.0 40-64 7.5-6.0 1016-1625 12.0-9.6 64-120 6.0-3.8 1625-3048 9.6-6.1 120-152 3.8-2.6 3048-3861 6.1-4.2 152-176 2.6-1.8 3861-4470 4.2-2.9 176-192 1.8-1.5 4470-4877 2.9-2.4 192-216 1.5 4877-5486 2.4 216-max 1.5 5486-max 2.4 (1) Top travel speed is reduced to 80% at a 12° steering angle, beyond 12° travel speeds gradually reduce down to 50% of top travel speed. Steering angle is automatically limited to within 12° straight travel as indicated below: • Standard Capacity above 192" (4877 mm) (2) For guided trucks, from 0-60 inches (0-1524 mm), travel speeds in the Forks First (FF) direction of travel are approximately 0.5 mph (0.8 km/h) less than travel speeds in the Power Unit First (PUF) direction. Forks First travel for non-guided trucks will be limited to a max travel speed of 5.5 mph (8.9 kmp) SP 1500 Series Technical Information Standard Equipment 1. Crown's Gena Operating System 2. 24, 36, or 48-volt electrical system 3. High Speed Lift (48V models) 4. AC lift, traction, and steer motors 5. Linear height speed control gradually reduces travel speed as the platform raises 6. Variable Lift/Lower 7. Regenerative Lower 8. Programmable lift/lower cutouts (up to 6) • Zone Select: designate lift/lower cutouts into 3 separate zones 9. OnTrac Anti-Slip Traction Control 10. Intelligent Braking System combines the optimum amount of friction and motor braking 11. Intelligent Steering System automatically slows the travel speed when in a turn and provides smooth, electronic steering 12. Manual Wire Sense (with optional wire guidance) 13. Connectivity* Cellular radio • Wireless truck firmware updates • Wireless truck data collection • Push wireless settings 14. Integrated InfoLink Hardware ** • Smart card reader Impact sensor • Wi-Fi radio 15. RAM Mounted 7" Color Touch Screen Display with Integrated Speaker • • Optically bonded 2mm thick capacitive touch screen • Integrated navigation buttons for freezer/cold storage applications Multiple languages • Vehicle status icons • Customizable dashboard with widgets Steer Wheel Indicator/ Wire Guidance Stopwatch Battery Discharge Indicator - Hour Meter Height - Clock - - . Odometer Zone Select · Calculator • Performance modes • Safety Reminders • Enhanced service diagnostics and troubleshooting Detailed event information and history Built-in analyzer - Step-by-step calibrations - Features programmability - Adjust performance settings • Maintenance Mode** • Visual Inspection Checklist** • Impact strobe light and audible alert tone** 16. Start-up and run-time diagnostics 17. Corrosion Conditioning 18. Heavy-duty power unit • Removable steel • battery side covers Hinged, lift-off steel power unit doors • Hinged, top battery cover • 2" (51 mm) diameter battery rollers 19. Service panel with platform raise/lower buttons located behind power unit doors 20. Manual lowering valve located behind power unit doors 21. LED flashing light 22. Four battery compartment sizes: 14.6" (371 mm), 16.8" (427 mm), 18.5" (470 mm), 21.1" (536 mm) 23. SB 350 battery connector 24. Color-coded wiring 25. 13" (330 mm) diameter poly drive tire 26. 6" (152 mm) diameter tandem load wheels 27. Operator-centric platform Visibility windows- unmatched views at any elevation - Large upper window- wire mesh screen - Exclusive middle window - wire mesh screen · Center floorboard window (1510 model) - Side floorboard slot windows - Aux mast visibility • Integrated Work Assist mounting rails - Flexibility in positioning Work Assist accessories - Center mounted Work Assist organizer bin ⚫Retractable tether and body harness • Alternative tether • attachment locations Key switch USB charging port (5V, 2 amp) 28. 1.5" (38 mm) manual pallet grab 29. InfoPoint Component Maps Optional Equipment 1. ProximityAssist System (Operator Assist Solution) • Increases headlength by 6.1 inches Xpress Lower windows (SP 1520 model)-wire mesh screen 2. • Cantilever side gates with cutout switches and integrated gas strut, padding, and bungee cord 3. High Speed Lift (36V models) 4. Independent right and left • Premium anti-fatigue floor mat 6" (152 mm) diameter brake pedal Ergonomically designed operator controls Right hand controls optimized for blending traction, lift/lower, and horn i. Thumbwheel for traction control ii. Paddle for lift/lower control iii. Urethane covered hand grip with integrated horn button Left hand steering control i. Exclusive, adjustable horizontal and vertical tiller knob orientation ii. Spinner knob with urethane pad inserts iii. Urethane hand grip for stability in guided aisles 78" (1980 mm) tall operator compartment • Built-in platform storage power unit facing control set height adjustability of 4" (102 mm) 5. Wire and/or rail guidance 6. End-of-aisle control system (wire or rail guidance required) 7. High capacity for standard straddle 8. Narrow Straddle 9. Fork Lengths 10. Pallet/Cart Detection 11. Override switch for lift/lower cutouts 12. Keyless user access 13. Display navigation knob (standard with freezer conditioning) 14. Panoramic Lexan Overhead Guard 15. Clear glass upper visibility window 16. Clear poly middle visibility window 17. Clear poly aux mast visibility windows (SP 1520 model) 18. 48" (1220 mm), 54" (1370 mm), 60" (1525 mm), and 64" (1625 mm) wide operator platforms * Crown Lift Trucks with the Gena OS are connected products. Please see crown.com for the data use policy to see more. ** Functional with an active InfoLink service plan. SP 1500 Series Technical Information 19. 84" (2130 mm) tall operator compartment 20. LED Work Lights, LED Dome Lights, and Dual Operator Fans 21. LED Spotlights • OHG mounted, adjustable • Mast mounted 22. OHG extensions with built-in LED pick bay lights 23. Floor Spotlight - Blue 24. Travel Alarm 25. Operator Backrest/Perch (SP 1520 model) 26. Full length side gates with cutout switches and integrated gas struts, padding, and bungee cord 27. Side gates raised travel and lift/lower functionality - programmable 28. Battery retainer interlock switch 29. V-Force Lithium-Ion Ready 30. Fuel Cell Ready 31. 4" (102 mm), 6" (152 mm), or variable width 1.5" - 6" (38- 152 mm) manual pallet grab 32. Variable width 1.5" - 6" (38- 152 mm) electric pallet grab 33. Freezer Conditioning Includes corrosion conditioning, ribbed floor mat, and wire mesh windows 34. Positive/Negative accessory cable (@truck voltage) 35. UL EE Rating 36. 30" (762 mm) lanyard boom 37. Load wheel and drive tire compounds 38. Rearview Mirrors 39. Work Assist Accessories • Additional USB Power Supply • Scan Gun Holder • Ram Mount • Shrink wrap holder Drink holder Angled storage buckets • Clipboard • Pocket inserts for standard organizer bin Cargo net • Trash bracket • Corner tray • Center window bracket • Gate mounted reusable bag • Gate mounted pocket . Large, magnetic mounted, power unit storage bin 40. Special paint 41. Fire extinguisher 42. Aluminum platform extension 43. Fork facing controls or dual facing (fork and power unit) controls (SP 1520 model) 44. Locking gates Crown's Gena Operating System Leverages Crown's proven, integrated control module structure to provide an enhanced user experience for operators, service technicians, and managers. Integrated InfoLink hardware allows for seamless enabling of Crown's telematics fleet management solution. The Gena Operating System monitors inputs from all on- board sensors and responds instantaneously to control truck systems for safe, optimized performance. All control modules are in constant communication via a CAN (Control Area Network) bus so that real time information is accessible to the system at all times. Standard safety and performance features further boost operator confidence and productivity, increasing throughput in narrow aisle applications. Real-time truck communication to the user through the Gena display equates to a powerful data-rich experience. Wireless firmware downloads ensure that the Gena operating system can be easily updated without requiring the use of a handset or laptop. * Functional with an active InfoLink service plan. 7" Touch Screen Display The industrial grade, capacitive touch screen display provides intuitive menus and configurable widgets to enhance operator engagement, productivity and situational awareness. Large on-screen color graphics provide a bolstered visual interface while an integrated speaker provides unique audible tones specific to the on- screen communication. Screens also offer context- sensitive assistance, including alerts, automated assistance, and dynamic real-time data. Safety reminder messages and an inspection checklist with visual cues* provide industry exclusive capabilities that reinforce operator training to assist in facility safety. A refined service menu enables viewing of multiple lift truck inputs and outputs and step-by-step calibrations with voltage readouts which assists in expediting trouble shooting. Technicians can quickly access service history, set up performance parameters, and enable or disable truck features through the display. Operator Platform The operator platform is designed for visibility, stability, and ergonomics to increase operator confidence and comfort. The operator platform features a large upper visibility window. A Crown-designed clear-visibility mast affords upper window visibility through the mast while also providing unobstructed peripheral views when the platform is lowered. The clear-visibility mast, with full free lift, extends both the upper and middle platform windows above the mast channels for unobstructed and unmatched visibility when elevated. An industry exclusive standard mid-window provides exceptional power unit first visibility at height. Standard center floor and side floor slot windows allow for easy viewing under the platform and of the outriggers while elevated. The SP 1520 features standard aux mast windows which provide elevated forks first visibility below a raised load. An optional panoramic overhead guard provides unobstructed views above the truck while elevating. The right-hand control set features a fixed, urethane covered hand grip. The hand grip has an integrated horn button and a thumbwheel at the end for traction control. A paddle near the hand grip actuates lift and lower. This design optimizes blending of functions without sacrificing operator stability. Traction, lift/ lower, and horn engagement can be seamlessly blended while maintaining a consistent solid point of contact. The left-hand control set features an industry exclusive tiller knob orientation adjustment which provides operator flexibility in all applications while still remaining a solid point of contact to bolster operator confidence. The tiller knob is angled at 10° to reduce steer effort in the vertical position. An optional 4" (102 mm) of independent height adjustability for the power unit facing controls provides even more operational flexibility and comfort. The premium anti-fatigue platform cushion, made of a microcellular composition, absorbs shock and vibration. A 6" (152 mm) diameter brake pedal has a low- profile design that is flush with the platform cushion when engaged for maximum comfort. Heavy- duty side gates feature integrated gas struts for easy lifting and lowering as well as integrated padding for a comfortable leaning point when order picking. Both gates include a built-in bungee cord for quick access to pick labels or other frequently used paperwork. Standard interlock cut-out switches disengage truck operation when the side gates are raised; however, this functionality can be modified. Contact your Crown dealer. A light/fan package option, consisting of two work lights, two dome lights, and two operator fans, provides enhanced operator comfort and confidence. Integrated Work Assist mounting rails in the platform structure provides flexibility in positioning accessories and work tools to improve operator efficiency. A USB charging port, organizer bin, and integrated storage compartments are also standard. A foot-applied and foot-released pallet clamp for use with pallets having center stringers is also provided. SP 1500 Series Technical Information Crown Drive System Crown's AC drive system, enhanced with Gena technology, provides exceptional travel speeds, acceleration and deceleration, thus increasing productivity. A Crown-manufactured drive unit uses spiral bevel and helical gears from motor to drive wheel axle. A fixed, mounted drive motor does not rotate which minimizes wear on electrical cables. Standard linear height speed control provides smooth travel speed transitions as lift heights change, increasing productivity. Standard OnTrac anti-slip traction control monitors truck dynamics, optimizes tractive effort, reduces spinning during acceleration, prevents lock-up during braking, and can extend tire life. It improves traction performance in wet, dusty, or cold storage conditions. Intelligent Steering Crown's intelligent steering system slows the truck automatically when the steer tiller is turned beyond 12° enabling superior truck stability during turning. The Gena operating system monitors the height of the operator platform, truck speed, and steer wheel position at all times. The tiller knob rotation provides smooth, operator feedback. Auto-centering of the drive tire occurs at start up. Intelligent Braking Crown's intelligent braking system combines variable motor braking with a three-step friction brake to optimize safety and comfort for the operator. The appropriate level of braking is applied dependent upon platform height, direction of travel, and truck weight. Braking force is automatically reduced as height increases and speed decreases. Optimum braking for the right elevation gives operators more confidence and better control, while eliminating abrupt stops and reducing platform sway. In addition, friction brake use is minimized, which prolongs brake life. Braking can also be accomplished by proportional plugging, which permits the operator to control the rate of deceleration when extended stopping distance is preferred. Enhanced Hydraulics Heavy-duty AC pump motor and gear pump is assembled into an integral unit. Regenerative lowering, as well as variable lifting and lowering, are both standard on all voltage offerings. A high-speed lift option, available for the 36V model, and standard lift performance on the 48V model, provide leading lift speeds. The Xpress Lower option, which is available for all voltages, more than doubles the standard lowering speeds to aid in the reduction of picking cycle times. Hydraulic cylinder cushioning provides smooth and consistent lifting and lowering performance throughout the entire range of lift height which enhances operator comfort and confidence during operation. The Crown Mast Assembly High visibility two- and three- stage masts feature a nested rail design with lift cylinders positioned behind the mast rails. The three- stage mast has a compact center cylinder yoke design for enhanced visibility in the power unit direction. Integrated mast guides between the channels provide smooth and quiet operation while traveling. Routing of hoses and cables optimizes visibility throughout the mast. Built in sensors detect chain slack and shut down primary lower function if chain slack is detected. Negative rail drop allows for shimming of mast rollers without major disassembly. Heavy-Duty Low Profile Power Unit Power unit is fabricated from heavy-gauge steel. Lower skirt is 0.75" (19 mm) steel that runs 9" (228 mm) high for component protection. Rugged steel doors suspended on heavy-duty pin hinges cover power unit componentry. Doors swing wide for open access. Doors can be lifted off for unrestricted service access. Door fastening bolts have exclusive convex design that mates with concave door holes for faster alignment and installation. Lift-off battery side covers are all steel. An optional battery retainer interlock switch is available. Top battery access is available by lifting cover. Cover has integral support post. A standard panel is located behind the power unit doors to provide technicians with raise/ lower functionality of the platform. Wheels and Tires Polyurethane drive tire, 13" (330 mm) diameter x 5.5" (140 mm) wide x 8" (203 mm) hub diameter. Tandem load wheels are 6" (152 mm) diameter polyurethane x 2.8" (70 mm) wide (4.25" (108 mm) wide for high capacity trucks). Optional polyurethane aisle guide wheels are 2" (51 mm) wide with a 4" (102 mm) or 2.5" (64 mm) diameter. Forks 2" (51 mm) thick x 4" (102 mm) wide forged steel. Fork spread (adjustable) 24" (610 mm) to 30" (760 mm). Standard length is 36" (915mm). Optional lengths available. Warning Device Options Audible Alerts Safety considerations and dangers associated with audible travel alarms include: • Multiple alarms can cause confusion. • Workers ignore the alarms after day-in and day-out exposure. • • Operator may transfer the responsibility for "looking out" to the pedestrians. Annoys operators and pedestrians. Other Options Available Contact factory for additional options. Dimensions and performance data given may vary due to manufacturing tolerances. Performance is based on an average size vehicle and is affected by weight, condition of vehicle, how it is equipped and the conditions of the operating area. Products and specifications are subject to change without notice. СЛОШП crown.com You can count on Crown to build lift trucks designed for safe operation, but that's only part of the safety equation. Crown encourages safe operating practices through ongoing operator training, safety-focused supervision, maintenance and a safe working environment. Go to crown.com and view our safety section to learn more. Because Crown is continually improving its products, specifications are subject to change without notice. Crown, the Crown logo, the color beige, the Momentum symbol, Work Assist, Gena, InfoLink and V-Force are trademarks of Crown Equipment Corporation in the United States and other countries. Copyright 2025 Crown Equipment Corporation SF20897 01-25 Printed in U.S.A.