Cessna 182 Skylane — Maintenance Manual
2 maintenance manual references for the Cessna 182 Skylane.
The SkyView HDX Autopilot Servo Installation & Maintenance Manual is designed for the installation and maintenance of SkyView autopilot servos in Cessna 182 series aircraft. It provides detailed instructions for the installation of both roll and pitch servos, ensuring compliance with airworthiness standards. The manual is intended for FAA-certified technicians and includes guidelines for continued airworthiness, installation compliance, and troubleshooting. It emphasizes the importance of verifying control cable conditions and provides a comprehensive list of materials and tools required for installation. The document also outlines necessary procedures for maintaining the servos to ensure safe operation of the autopilot system.
- This manual is for Cessna 182 series aircraft, not Cessna 185.
- Control cables must be verified for diameter and condition before installation.
- Installation compliance requires submission of FAA Form 337.
- Specific tools are needed for the installation, including an angle drill and swage compression tool.
- The manual includes detailed materials lists for both roll and pitch servo installations.