CUSTOMER SPECIFICATION SPECIFICATION NAME REVISION ...
CESSNA A185E · Specifications
Overview
This document serves as a comprehensive specification for the Beechcraft Beechjet 400A, including various materials, processes, and standards applicable to the aircraft. It outlines the requirements for production quality control, material specifications, and assembly instructions. The document is intended for manufacturers, suppliers, and maintenance personnel involved in the production and upkeep of the Beechjet 400A. It includes detailed specifications for components, assembly methods, and quality assurance processes to ensure compliance with industry standards and safety regulations.
- The Beechcraft Beechjet 400A requires adherence to strict production quality control measures.
- Specific aluminum alloys and treatments are mandated for use in construction.
- Assembly instructions include detailed fastening and bonding techniques.
- Inspection protocols include non-destructive testing to ensure component integrity.
- Finishing procedures are critical for protecting the aircraft from corrosion and wear.
Document
Source
Originally published by verusaerospace.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Specifications
- Year
- 2023
- Pages
- 76
- File size
- 1.8 MB
- Publisher
- verusaerospace.com
Common. One of the most common aircraft types we track.
Most owners only have the POH. Here's the essential set for the CESSNA A185E.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
CESSNA A185E for sale now
Free — save the A185E to your watchlist and track it in one place.
More CESSNA A185Emanuals & documents
- Trim Wheel Installation Instructions for Cessna 180, Early 182, and ...Wiring Diagram
- INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FOR HARTZELL (P)HC-C3YF-1RF/F8429 PROPELLER ON CESSNA A185(E, F) AIRCRAFTFlight Manual
- Tornado Alley Turbo, Inc. TAT SI15-02Service Bulletins
- Cessna-Mustang-datasheet.pdfSpecifications
- IM199-62 INSTALLATION MANUAL FOR CONVERSION KIT 199-62Checklist
- SCHEDULE OF AIRWORTHINESS DIRECTIVESService Bulletins
- Cessna 185 - BigPlanes RC Model PlanesChecklist
If you fly the CESSNA A185E, you may also be researching these.
In this document
Production Quality Control
This section details the quality control measures required during the production of the Beechjet 400A. It emphasizes the importance of adhering to specified standards and procedures to maintain the integrity and safety of the aircraft.
Material Specifications
The document outlines various material specifications, including aluminum alloys and other components used in the construction of the Beechjet 400A. Specific grades and treatments are detailed to ensure compatibility and performance.
Assembly Instructions
This section provides guidelines for the assembly of the Beechjet 400A, including fastening techniques, bonding methods, and the installation of critical components. It ensures that all assembly practices meet safety and performance standards.
Inspection and Testing
Inspection and testing protocols are outlined to ensure that all components meet the required specifications. This includes non-destructive testing methods and quality assurance checks to verify the integrity of materials and assemblies.
Finishing Procedures
The finishing procedures for the Beechjet 400A are described, including surface treatments, coatings, and painting specifications. These procedures are essential for protecting the aircraft from environmental factors and ensuring longevity.
Safety notes
- Ensure all materials meet specified standards to prevent structural failures.
- Follow assembly instructions precisely to maintain aircraft safety and performance.
Full document text
PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 CUSTOMER SPECIFICATION SPECIFICATION NAME REVISION NOTES Airbus SPEC - A1074 FIRST ARTICLE INSPECTION REQUIREMENTS FOR SUPPLIERS A Airbus SPEC - ABM 0-0003 AIRBUS UK APPROVED ALTERNATIVES FOR WITHDRAWN, OBSOLESCENT AND CURRENT MATERIAL SPECIFICATIONS 18 Airbus SPEC - ABM 1-6016 ALUMINUM ALLOY 2090 T86 SHEET 1 Airbus SPEC - ABM 3-1029 ALUMINUM ALLOY 7010/7050 T7651 PLATE 6 Airbus SPEC - ABP 0-1013 CONTROL OF PROTECTIVE TREATMENT AND FINISHING FOR AIRBUS WING 3 Airbus SPEC - ABP 0-1014 CONTROL AND DEFINITION OF PROTECTIVE TREATMENT CODES 8 Airbus SPEC - ABP 1-1023 CHROMIC ACID ANODISING OF ALUMINUM 2 Airbus SPEC - ABP 1-3334 DEPOSITION OF TITANIUM NITRIDE BY PHYSICAL VAPOUR DEPOSITION (PVD) 2 Airbus SPEC - ABP 1-4046 TEMPORARY PROTECTION OF METALLIC MATERIALS AGAINST CORROSION 6 AIRBUSSPEC Airbus SPEC - ABP 1-5057 CONVERSION COATING OF ALUMINUM 6 AIRBUSQSPL Airbus SPEC - ABP 2-1065 RIVETING WITH BLIND NUT PLATE RIVETS (CHERRY) 1 Airbus SPEC - ABP 2-1071 MILLING THE HEADS OF RIVETS AFTER RIVETING 1 Airbus SPEC - ABP 2-1072 MANUAL RIVETING WITH PRE-FORMED SOLID RIVETS 1 Airbus SPEC - ABP 2-2081 MANUAL FASTENING WITH 4-START QUICK RELEASE FATENERS 2 Airbus SPEC - ABP 2-3097 PREPARATION OF COUNTERSUNK HOLES IN METALLIC MATERIALS FOR FASTENING AND RIVETING 1 Airbus SPEC - ABP 3-1119 HEAT TREATMENT OF ALUMINUM 2 Airbus SPEC - ABP 3-1120 REFRIGERATED STORAGE OF ALUMINUM AFTER HEAT TREATMENT 1 Airbus SPEC - ABP 4-1121 APPLICATION OF BONDING PRIMER AS EROSION RESISTANT COATING 4 Airbus SPEC - ABP 4-1123 APPLICATION OF CORROSION INHIBITING PRIMER TO AN INTERNAL OR EXTERNAL SURFACE 15 Airbus SPEC - ABP 4-2124 APPLICATION OF ABRASION RESISTANT PAINT 6 Airbus SPEC - ABP 4-2130 APPLICATION OF FLEXIBLE FINISH PAINT TO AN INTERNAL SURFACE 15 Airbus SPEC - ABP 4-5142 APPLICATION OF SEALANT FOR GENERAL AIRCRAFT STRUCTURE 5 Airbus SPEC - ABP 6-3201 GENERAL INSTRUCTIONS FOR THE FABRICATION OF WROUGHT ALUMINUM 10 AIRBUSSPEC Airbus SPEC - ABP 6-3345 LIMITS FOR MACHINING FEATURES 4 AIRBUSSPEC Airbus SPEC - ABP 6-3349 LASER CUTTING 4 Airbus SPEC - ABP 6-5224 TESTING OF ALUMINUM ALLOYS BY ELECTRICAL CONDUCTIVITY 4 Airbus SPEC - ABP 6-5226 HARDNESS TESTING OF METALLIC MATERIALS 3 Airbus SPEC - ABP 6-5230 TESTING BY PENETRANT FLAW DETECTION 2 Airbus SPEC - ABP 6-5232 TESTING BY ULTRASONIC FLAW DETECTION 1A Airbus SPEC - ABP 7-1246 ELECTRICAL BONDING AND EARTHING FOR AIRBUS REQUIREMENTS DURING ASSEMBLY 2 Airbus SPEC - ABP 8-1294 SOLVENT CLEANING AND DEGREASING OF MATERIALS 9 AIRBUSSPEC Airbus SPEC - ABP 9-3323 INK MARKING (GENERAL) 5 Airbus SPEC - ABP 9-4324 CONTROL OF MARKING SPECIFICATIONS 5 Airbus SPEC - ABP 9-4325 PROTECTION OF MARKING BY THE APPLICATION OF POLYURETHANE PAINTS AS OVERCOATING 3 Airbus SPEC - ABR 4-0080 RUBBER, SILICONE, GENERAL PURPOSE 16 Airbus SPEC - ABR 9-0140 GENERAL PURPOSE CLEANING SOLVENT 4 Airbus SPEC - ABS 0112 RIVET, BLIND 100° CSK 3 Airbus SPEC - ABS 1707 HOLE GEOMETRIES FOR USE WITH PROTRUDING AND COUNTERSUNK HEAD FASTENERS AND SPECIFIC NUTS 12 AIRBUSSPEC Airbus SPEC - ABS 5043 CLAD SHEETS, PLATES AND STRIPS, ALUMINUM ALLOY 2024 SPECIAL SURFACE QUALITY GENERAL AND SPECIFIC TOLERANCES 5 Airbus SPEC - ABS 5323 PLATES, ALUMINUM ALLOY 7010/7050, CLOSE- TOLERANCE FLATNESS, 6,0 mm = a = 200,0 mm, DIMENSIONS 7 Airbus SPEC - AIMS 03-01-000 ALUMINUM AND ALUMINUM ALLOY WROUGHT PRODUCTS GENERAL REQUIREMENTS 1 Airbus SPEC - AIMS 03-02-000 ALUMINUM AND ALUMINUM ALLY WROUGHT PRODUCTS PLATE 3 Airbus SPEC - AIMS 03-02-029 ALUMINUM ALLOY (7010/7050) SOLUTION TREATED CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T7651) PLATE 2 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Airbus SPEC - AIMS 03-04-012 ALUMINUM ALLOY (2024) SOLUTION TREATED AND NATURALLY AGED (T42) CLAD SHEET AND PLATE SPECIAL SURFACE QUALITY 4 Airbus SPEC - AIMS 04-04-007 ABRASION RESISTANT PAINT 2 Airbus SPEC - AIMS 04-04-027 WEAR RESISTANT COATINGS FOR AREAS WITH LOW CHEMICAL IMPACT 1 Airbus SPEC - AIMS 04-04-031 CHROMATE FREE EXTERNAL PAINT SYSTEM: PRIMER + TOP COAT APPLIED ON BASIC PRIMER 1 Airbus SPEC - AIMS 04-04-032 CHROMATE FREE EXTERNAL PAINT SYSTEM: PRIMER + INTERMEDIATE COAT + TOP COAT APPLIED ON BASIC PRIMER 1 Airbus SPEC - AIMS 04-04-033 CHROMATE FREE EXTERNAL PAINT SYSTEM: PRIMER + BASECOAT + CLEARCOAT ON BASIC PRIMER 2 Airbus SPEC - AIMS 04-04-034 EXTERNAL PAINT SYSTEM: CHROMATE FREE PRIMER + WING COATING 1 Airbus SPEC - AIMS 04-04-036 CHROMATE FREE EXTERNAL PAINT SYSTEM PRIMER, PRIMER + MATT TOP COAT APPLIED ON BASIC PRIMER 3 Airbus SPEC - AIMS 04-04-037 CHROMATE FREE EXTERNAL PAINT SYSTEM: PRIMER + INTERMEDIATE COAT + BASECOAT + CLEARCOAT ON BASIC PRIMER 2 Airbus SPEC - AIMS 04-04-038 CORROSION INHIBITING PRIMER FOR APPLICATION ON ALL PRE-TREATMENTS 1 Airbus SPEC - AIMS 04-04-040 INTERNAL PAINT SYSTEM - PRIMER + TOPCOAT FOR APPLICATION ON ALL PRETREATMENTS 1 Airbus SPEC - AIPI 01-02-003 PREPARATION OF HOLES IN METALLIC MATERIALS FOR FASTENING A3 AIRBUSSPEC Airbus SPEC - AIPI 01-02-017 GENERAL ASSEMBLY AND INSTALLATION OF FASTENERS 3 Airbus SPEC - AIPI 03-11-001 MACHINING OF METALLICS A7 Airbus SPEC - AIPI 05-02-003 APPLICATION OF EXTERNAL PAINT SYSTEMS 2 Airbus SPEC - AIPI 05-02-009 APPLICATION OF STRUCTURAL PAINTS 2 Airbus SPEC - AIPI 08-03-002 PERMANENT MARKING WITH INK 2 Airbus SPEC - AIPI 09-01-002 CLEANING WITH LIQUID NON AQUEOUS AGENTS 2 AIRBUSSPEC Airbus SPEC - AIPS 01-02-003 PREPARATION OF HOLES IN METALLIC MATERIALS FOR FASTENING 7 AIRBUSQSPL Airbus SPEC - AIPS 01-02-017 GENERAL ASSEMBLY AND INSTALLATION OF FASTENERS 4 Airbus SPEC - AIPS 02-01-001 CHROMIC ACID ANODIZING OF ALUMINUM ALLOYS 2 Airbus SPEC - AIPS 02-01-003 TARTARIC SULPHURIC ANODISING OF ALUMINUM ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT 2 AIRBUSQSPL Airbus SPEC - AIPS 03-03-012 INSTALLATION OF BEARINGS, SPHERICAL BEARINGS AND BUSHES BY SWAGING 4
Show full textShow less
Airbus SPEC - AIPS 04-01-001 HEAT TREATMENT OF ALUMINUM ALLOY PARTS 4 Airbus SPEC - AIPS 05-02-003 APPLICATION OF EXTERNAL PAINT SYSTEMS 5 AIRBUSQSPL Airbus SPEC - AIPS 05-02-009 APPLICATION OF STRUCTURAL PAINTS 4 AIRBUSQSPL Airbus SPEC - AIPS 08-03-002 PERMANENT MARKING WITH INK 3 Airbus SPEC - AIPS 09-01-002 CLEANING WITH LIQUID NON AQUEOUS AGENTS INCLUDING VAPOR PHASE 4 AIRBUSSPEC Airbus SPEC - AITM 1-0058 MOBILE HARDNESS TESTING 1 Airbus SPEC - AITM 1-0070 SURFACE ROUGHNESS MEASURMENTS USING SURFACE CONTACT STYLUS METHOD 1 AIRBUSSPEC Airbus SPEC - AMCD 02 INDEX OF AIRBUS UK MATERIAL AND PROCESS SPECIFICATIONS 40 Airbus SPEC - AP2190 GENERAL REQUIREMENTS FOR AEROSTRUCTURE & MATERIAL SUPPLIERS C Airbus SPEC - AP5-020-00 ALUMINUM ALLOY 4 Airbus SPEC - AP5374 QUALIFY AND STANDARDIZE PRODUCTS AND PROCESSES B1 Airbus SPEC - ASI 0-01 AIRBUS SUPPLIER INSTRUCTIONS 1 Airbus SPEC - ASI 3-02 SEALED DATA ROUTE 1 Airbus SPEC - ASI 6-01 INTERCHANGEABILITY (ICY) AND REPLACEABILITY FOR AIRBUS PROJECTS 1 Airbus SPEC - ASI 6-03 FIRST ARTICLE INSPECTION 1 Airbus SPEC - ASI 6-10 QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING AND MATERIAL EVALUATION 5 Airbus SPEC - BS EN 2004-1 TEST METHODS FOR ALUMINUM AND ALUMINUM ALLOY PRODUCTS 1993 Airbus SPEC - IPS04-04-003-30 INTERNAL PAINT SYSTEM - PRIMER + TOPCOAT 1 Airbus SPEC - prEN 2002-7 AEROSPACE SERIES METALLIC MATERIALS TEST METHODS PART 7: HARDNESS TEST P2 Airbus SPEC - SL4083 DEBURRING - HOLES AND EDGES 3 Airbus SPEC - TN.A.007.10003 PROTECTIONS BG Airbus SPEC - TN.A.007.10050 NON-METALLIC ANTI-CORROSIVE COATINGS (PAINT VARNISHES) BC Beechcraft Corp. SPEC - 03-02-023 PRODUCTION QUALITY CONTROL MANUAL - Beechcraft Corp. SPEC - 04-15-004 MAGNETIC PARTICAL INSPECTION G PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Beechcraft Corp. SPEC - 100801 BUSHING - CLEARANCE FIT 17 Beechcraft Corp. SPEC - 102809 PIN - DRILL ROD C Beechcraft Corp. SPEC - 103397 LIGHTENING HOLE MODIFIED 19 Beechcraft Corp. SPEC - 105740 BUSHING - PRESS FIT, SPECIAL, STAINLESS STEEL, ALUMINUM, PHOSPHOR BRONZE, STEEL, & ALUMINUM BRONZE 26 Beechcraft Corp. SPEC - 105982 BOLT - LONG THREAD, VARIABLE GRIP E Beechcraft Corp. SPEC - 111545 METHOD - NATIONAL FORM THREAD RELIEF B Beechcraft Corp. SPEC - 115169 SPECIMEN - ALUMINUM, TITANIUM, OR STEEL, BONDING TEST 5 Beechcraft Corp. SPEC - 130004 EXTRUSION - CHAIR BACK B Beechcraft Corp. SPEC - 130077 INSERT - SCREW THREAD, HIGH STRENGTH 12 Beechcraft Corp. SPEC - 130078 METHOD - SCREW THREAD INSERT INSTALLATION 4 Beechcraft Corp. SPEC - 130325 EXTRUSION - I BEAM C Beechcraft Corp. SPEC - 130450 STANDARD PRACTICE NOTES BK Beechcraft Corp. SPEC - 130460 EXTRUSION - NACELLE RIB CAP B Beechcraft Corp. SPEC - 130909 FASTENER - MAGNETIC INSPECTED BT Beechcraft Corp. SPEC - 130936 TUBE - PLASTIC 13 Beechcraft Corp. SPEC - 131270 BLIND GROUNDING STUD - ELECTRICAL TERMINAL 6 Beechcraft Corp. SPEC - 131421 SPROCKET - ROLLER CHAIN M Beechcraft Corp. SPEC - 131431 HINGE - HALF A Beechcraft Corp. SPEC - 131710 EXTRUSION - SPAR CAP, LOWER MAIN, OUTBOARD E Beechcraft Corp. SPEC - 131967 EXTRUSION - U SECTION A Beechcraft Corp. SPEC - 132009 SHIM - LAMINATED VARIABLE SIZE ALUMINUM A Beechcraft Corp. SPEC - 132369 RIVET - SOLID, CLOSE TOLERANCE, UNIVERSAL HEAD H Beechcraft Corp. SPEC - 132370 RIVET - SOLID, CLOSE TOLERANCE, COUNTERSUNK 100°, PRECISION HEAD K Beechcraft Corp. SPEC - 132396 FASTENER CODES G Beechcraft Corp. SPEC - 132414 EXTRUSION - STRINGER B Beechcraft Corp. SPEC - 132420 EXTRUSION REINFORCEMENT A Beechcraft Corp. SPEC - 132430 EXTRUSION - ZEE UPPER STRINGER AFTER A Beechcraft Corp. SPEC - 132473 HINGE - EXTRUSION A Beechcraft Corp. SPEC - 132475 EXTRUSION - SPAR CAP, AFT, FRACTURE CRITICAL MATERIAL 5 Beechcraft Corp. SPEC - 132493 EXTRUSION - ANGLE B Beechcraft Corp. SPEC - 132504 EXTRUSION - ZEE B Beechcraft Corp. SPEC - 132506 BRACKET ASSEMBLY - WITH PLATE NUT C Beechcraft Corp. SPEC - 132527 PIN - PROTRUDING TENSION HEAD, TITANIUM, NOMINAL, 1ST & 2ND OVERSIZE 10 Beechcraft Corp. SPEC - 132528 PIN - PROTRUDING TENSION HEAD, ALLOY, STEEL, NOMINAL, 1ST & 2ND OVERSIZE 4 Beechcraft Corp. SPEC - 132557 SEAL - FABRIC COVERED B Beechcraft Corp. SPEC - 132599 CUTOUT - CONNECTOR, MIL-C-38999 SERIES II & III 4 Beechcraft Corp. SPEC - 132732 FLANGE - SUPPORT, THREADED C Beechcraft Corp. SPEC - 133-000000 AIRCRAFT GENERAL ASSEMBLY MODEL 3000 44 Beechcraft Corp. SPEC - 231814 EXTRUSION - CONTROL COLUMN GUIDE B Beechcraft Corp. SPEC - 308426 METHOD - RIVETING OF 100° COUNTERSUNK HEAD 13 Beechcraft Corp. SPEC - 316AS RETAINER - CABLE END B Beechcraft Corp. SPEC - BP-16258 SPECIAL LEVEL FLUORESCENT PENETRANT ALUMINUM D Beechcraft Corp. SPEC - BP-16259 SPECIAL LEVEL FLUORESCENT PENETRANT, 718 INCONEL C Beechcraft Corp. SPEC - BP-16260 SPECIAL LEVEL RADIOGRAPHY PRSA, ALUMINUM PRESSURE VESSELS A Beechcraft Corp. SPEC - BP-16261 SPECIAL LEVEL RADIOGRAPHY PRSA, 718 INCONEL PRESURE VESSELS A Beechcraft Corp. SPEC - BS16128 FLUORESCENT PENETRANT INSPECTION POWER REACTANT STORAGE ASSEMBLY (PRSA) SPACE SHUTTLE (SE05) 1 Beechcraft Corp. SPEC - BS1000 SUBSTITUTION, PREFERRED ITEM AND SOURCE OF SUPPLY DATABASE B Beechcraft Corp. SPEC - BS201 ADHESIVES, CEMENTS, AND SEALERS, APPLICATION AND USE OF 40 Beechcraft Corp. SPEC - BS20706 BONDING, ELECTRICAL, ELECTRONIC AND AVIONICS FOR AIRCRAFT 9 Beechcraft Corp. SPEC - BS20804 ADHESIVES, SEALERS AND FILLERS - CONTROL OF TWO PART 16 Beechcraft Corp. SPEC - BS22455 FINISHING PROCEDURE FOR MODELS USING URETHANE FINISHES 28 Beechcraft Corp. SPEC - BS22639 ALUMINUM ALLOY, ALCLAD 2024-T3 COILED SHEET, ALL MODELS - Beechcraft Corp. SPEC - BS23198 FINISH SPECIFICATION FOR BEECH MODELS 1900, 1900C, & 1900D AIRCRAFT A Beechcraft Corp. SPEC - BS23369 CHEMICAL LOCKING OF METAL PARTS, ALL MODELS 5 Beechcraft Corp. SPEC - BS23378 MODEL B200 SERIES SPECIFICATION B Beechcraft Corp. SPEC - BS23673 FINISH SPECIFICATION G Beechcraft Corp. SPEC - BS23675 COLOR CODING OF FLIGHT CONTROL SYSTEM COMPONENTS - PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Beechcraft Corp. SPEC - BS23718 GRAPHITE (CARBON)/EPOXY PREPREG RESIN SYSTEM, 250-350°F CURING 10 Beechcraft Corp. SPEC - BS23724 ADHESIVE FILM STRUCTURAL MODIFIED EPOXY 250° TO 300°F CURING B Beechcraft Corp. SPEC - BS23727 ADHESIVE PASTE TWO-PART EPOXY 7 Beechcraft Corp. SPEC - BS23733 CLEAN ROOM REQUIREMENTS FOR COMPOSITES, BONDING, AND PRIMER APPLICATION 4 Beechcraft Corp. SPEC - BS23734 FAIRING COMPOUND, AERODYNAMIC, EPOXY FILLER B Beechcraft Corp. SPEC - BS23738 BONDING USING ROOM TEMPERATURE CURING PASTE ADHESIVE 8 Beechcraft Corp. SPEC - BS238 CLOSE TOLERANCE STEEL ROD E Beechcraft Corp. SPEC - BS23865 CORROSION INHIBITING ADHESIVE PRIMER 7 Beechcraft Corp. SPEC - BS23967 INSTALLATION OF NUTPLATES, STUDS, STANDOFFS, AND OTHER FASTENERS ON COMPOSITE ANDMETAL SURFACES 4 Beechcraft Corp. SPEC - BS24275 COMPOSITE STRUCTURE - STANDARD REWORK 7 Beechcraft Corp. SPEC - BS24457 INDEX OF SPECIFICATIONS, STANDARDS, AND OTHER PUBLICATIONS APPLICABLE TO THE BEECHJET (HAWKER 400XP) MODELS MU-300, 400, & 400A 7 Beechcraft Corp. SPEC - BS24554 PHOSPHORIC ACID ANODIZING OF ALUMINUM ALLOYS FOR STRUCTURAL BONDING 4 Beechcraft Corp. SPEC - BS24580 PARTS LIST (PL) INTERPRETATION SPECIFICATION - Beechcraft Corp. SPEC - BS24723 COLD EXPANSION OF STRUCTURAL FASTENER HOLES A Beechcraft Corp. SPEC - BS24749 INDEX OF SPECIFICATIONS, STANDARDS, AND OTHER PUBLICATIONS APPLICABLE TO THE SUPER KING AIR MODELS B200, B200C, B200T, B200CT, B200CGT, B200GT, 300, 300LW, B300, B300C 13 Beechcraft Corp. SPEC - BS24757 FINISH CODES FOR CORROSION PROTECTION PRIOR TO TOP COATING 6 Beechcraft Corp. SPEC - BS24790 INSTALLATION AND STAKINGS OF BEARINGS, BUSHINGS, AND GENERAL PARTS 3 Beechcraft Corp. SPEC - BS24795 RECEIVING BAR CODE LABEL SPECIFICATION A Beechcraft Corp. SPEC - BS24917 WIRE, ROPE, STEEL, FLEXIBLE FOR AIRCRAFT FLIGHT CONTROL SYSTEMS 4 Beechcraft Corp. SPEC - BS24942 RAW MATERIAL SUBSTITUTION SPECIFICATION 16 Beechcraft Corp. SPEC - BS25065 FINISH SPECIFICATION FOR THE MODEL 390 13 Beechcraft Corp. SPEC - BS25085 DC VOLTMETER, LCD, SPECIFICATION FOR A Beechcraft Corp. SPEC - BS25093 FINISH SPECIFICATION FOR THE MODEL 3000 JOINT PRIMARY AIRCRAFT TRAINING SYSTEM (JPATS) 17 Beechcraft Corp. SPEC - BS25110 INDEX OF SPECIFICATIONS, STANDARDS AND OTHER PUBLICATIONS APPLICABLE TO THE JOINT PRIMARY AIRCRAFT TRAINING SYSTEM (JPATS) 23 Beechcraft Corp. SPEC - BS25112 INTEGRAL FUEL TANK SEALING SPECIFICATION, JOINT PRIMARY AIRCRAFT TRAINING SYSTEM (JPATS) 5 Beechcraft Corp. SPEC - BS25116 PRINCIPAL STRUCTURAL ELEMENTS, FRACTURE CRITICAL PARTS, AND DURABILITY CRITICAL PARTS CONTROL REQUIREMENTS 15 Beechcraft Corp. SPEC - BS25146 GENERAL SEALING REQUIREMENTS FOR THE MODEL 3000 PRESSURIZATION/WEATHERIZATION SEALING SPECIFICATION JOINT PRIMARY AIRCRAFT TRAINING SYSTEM (JPATS) 5 Beechcraft Corp. SPEC - BS25210 SURFACE PREPARATION OF METALS PRIOR TO ADHESIVE BONDING NON ANODIZED R2 Beechcraft Corp. SPEC - BS25276 APPROVED SOURCES AND PROCEDURES FOR SHOT PEEN FORMING WING SKINS FOR THE MODEL 390 3 Beechcraft Corp. SPEC - BS25314 FINISH SPECIFICATION FOR THE MODEL 4000 21 Beechcraft Corp. SPEC - BS25328 PROCEDURES FOR THE APPLICATION OF THERMAL SPRAY COATINGS A Beechcraft Corp. SPEC - BS25340 STRAIGHTENING OF ALUMINUM ALLOYS, ENGINEERING SPECIFICATION FOR MODEL 4000 WING A Beechcraft Corp. SPEC - BS25481 INTEGRAL FUEL TANK, RIVET BONDING AND SEALING - Beechcraft Corp. SPEC - BS25524 INDEX OF SPECIFICATIONS, STANDARDS, AND OTHER PUBLICATIONS APPLICABLE TO THE PREMIER I MODEL 390 12 Beechcraft Corp. SPEC - BS25526 SPECIFICATION FOR STRESS & EMBRITTLEMENT, RELIEF REQUIREMENTS FOR CHEMICAL PROCESSES - Beechcraft Corp. SPEC - BS25575 COLD SHRINK-HEAT EXPANSION ASSEMBLY OF PARTS 6 Beechcraft Corp. SPEC - BS25592 ENGINEERING SPECIFICATION FOR GENERAL SAFETYING 2 Beechcraft Corp. SPEC - BS25649 NON-DESTRUCTIVE INSPECTION PROCESSES, SUBSTITUTION SPECIFICATION 1 Beechcraft Corp. SPEC - BS25691 CONTROL OF PRODUCT MANUFACTURING PROCESSES FOR SUPPLIERS AND OUTSIDE PRODUCTION 23 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Beechcraft Corp. SPEC - BS25696 FRACTURE CRITICAL AND DURABILITY PARTS CONTROL LISTING AND IDENTIFICATOIN/SERIALIZATION REQUIREMENTS FOR MODEL 3000 8 Beechcraft Corp. SPEC - BS25707 FLUORESCENT PENETRANT AND MAGNETIC PARTICLE INSPECTION PART EXEMPTION LIST 23 Beechcraft Corp. SPEC - BS2591 STANDARD ENGINEERING DRAWING CALLOUTS FOR GENERAL MATERIALS, PRACTICES, AND PROCESSES D Beechcraft Corp. SPEC - BS303413 INDEX OF SPECIFICATIONS STANDARDS AND OTHER PUBLICATIONS APPLICABLE TO THE MODEL 3000 INTEGRATED AVIONICS UPGRADE PROGRAM (IAUP) 8 Beechcraft Corp. SPEC - BS305511 APPROVED RAW MATERIAL SUBSTITUION BY PART NUMBER 3 Beechcraft Corp. SPEC - BS311327 FORMING OF ALUMINUM ALLOYS 3 Beechcraft Corp. SPEC - BS361 STANDARD FINISH SPECIFICATION 12 Beechcraft Corp. SPEC - BS383 MATERIALS, EQUIPMENT, AND REQUIREMENTS FOR INDENTIFICATION MARKING 28 Beechcraft Corp. SPEC - BS392875 REPROCESSING SPECIFICATION FOR HBC PARTS 1 Beechcraft Corp. SPEC - BS433 THREADED FASTENERS - TIGHTENING TO PROPER TENSION 9 Beechcraft Corp. SPEC - BS4896 ELECTRON BEAM WELDING - GENERAL A Beechcraft Corp. SPEC - BS510 WELDING OF ALUMINUM ALLOYS 5 Beechcraft Corp. SPEC - BS703809 FRACTURE CRITICAL AND DURABILITY PARTS CONTROL LISTING AND IDENTIFICATION / SERIALIZATION REQUIREMENTS FOR MODEL AT-6 3 Beechcraft Corp. SPEC - E24766S ENGINEERING STRUCTURES REPORT, SPROCKET INVESTIGATION - Beechcraft Corp. SPEC - E461180 ENGINEERING DRAWING MANUAL 4 Beechcraft Corp. SPEC - EAP123-004 ELECTRONIC MODEL NAMING CONVENTION STANDARDS 5 Beechcraft Corp. SPEC - EDS011 GENERAL DIMENSIONING AND TOLERANCING C Beechcraft Corp. SPEC - ERM2.1 TOOLING HOLES - Beechcraft Corp. SPEC - MS299 SPECIFICATION FOR BEARING BRONZE - Beechcraft Corp. SPEC - P1000 MACHINING FINISH GENERAL L Beechcraft Corp. SPEC - P1103 FORMING AND STRAIGHTENING OF ALUMINUM ALLOYS, GENERAL D Beechcraft Corp. SPEC - P1204 AIRTIGHT, WATERTIGHT SEALING-GENERAL C Beechcraft Corp. SPEC - P1221 SEALING PROCEDURES FOR INTEGRAL TANKS E Beechcraft Corp. SPEC - P1902 MARKINGS, PARTS & ASSEMBLY OF - GENERAL K Beechcraft Corp. SPEC - P2000 HEAT TREATMENT - CARBON STEEL, ALLOY STEEL, HEAT & CORROSION RESISTANT STEEL - GENERAL B Beechcraft Corp. SPEC - P2001 HEAT-TREATMENT - CARBON STEELS & ALLOY STEELS F Beechcraft Corp. SPEC - P2010 TEMPERATURE CONTROL FOR HEAT TREATING AND THERMAL PROCESSING - Beechcraft Corp. SPEC - P2303 HARD ANODIZE TREATMENT - ALUMINUM ALLOYS E Beechcraft Corp. SPEC - P2304 CHEMICAL FILM TREATMENT - ALUMINUM E Beechcraft Corp. SPEC - P2480 APPLICATION OF NITROCELLULOSE LACQUER - Beechcraft Corp. SPEC - P2700 FINISHES AND COATINGS; GENERAL SPECIFICATION FOR U Beechcraft Corp. SPEC - P2705 SHOT PEENING E Beechcraft Corp. SPEC - P7503 MAGNETIC PARTICLE INSPECTION - GENERAL D Beechcraft Corp. SPEC - P7511 PENETRANT INSPECTION - GENERAL K Beechcraft Corp. SPEC - P9000 MASTER SPECIFICATION E Beechcraft Corp. SPEC - SAS03-001 STANDARD ALLOWANCE SPECIFICATION FOR SHEET METAL - CRIMPING B Beechcraft Corp. SPEC - SAS03-003 STANDARD ALLOWANCE SPECIFICATION FOR SHEET METAL - EDGE CONDITIONS 5 Beechcraft Corp. SPEC - SAS03-004 SHEET METAL - STRINGER CUTOUT CLEARANCE - Beechcraft Corp. SPEC - SAS03-005 SHEETMETAL - SHIM INSTALLATION - Beechcraft Corp. SPEC - SAS03-007 STANDARD ALLOWANCE SPECIFICATION FOR SHEET METAL - FLANGE ANGLE TOLERANCE B Beechcraft Corp. SPEC - SAS03-009 SHEET METAL - EXTERNAL SURFACE IMPERFECTION LIMITATIONS AND REPAIR PROCEDURES FOR USE BY RAC PAINT DEPARTMENTS 5 Beechcraft Corp. SPEC - SAS04-004 FASTENER - NUTPLATE INSTALLATION D Beechcraft Corp. SPEC - SAS04-012 STANDARD ALLOWANCE SPECIFICATION FOR FASTENERS - SOLID RIVET ACCEPTANCE 7 Beechcraft Corp. SPEC - SAS07-002 FORMING - METAL THICKNESS VARIATION - Beechcraft Corp. SPEC - SAS09-002 DIMENSIONAL TOLERANCES - CONTOURS OF FORMED PARTS A Beechcraft Corp. SPEC - SAS09-005 DIMENSIONAL TOLERANCES - GENERAL TOLERANCES AND INTERPRETATION - Beechcraft Corp. SPEC - SAS09-006 DIMENSIONAL TOLERANCES, FREE STATE VARIATION OF MACHINED PARTS - Beechcraft Corp. SPEC - SAS10-004 STANDARD ALLOWANCE SPECIFICATION FOR MACHINING - CORNER RADII 3 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Beechcraft Corp. SPEC - SAS10-005 STANDARD ALLOWANCE SPECIFICATION FOR MACHINING - SURFACE ROUGHNESS & MACHINED FINISHES - Beechcraft Corp. SPEC - SAS6-001 HOLES - MACHINED HOLE TOLERANCE - Bell Helicopter SPEC - 1272 CHEMICAL FILM MATERIAL FOR ALUMINUM U Bell Helicopter SPEC - 160-006 ALTERNATE MATERIALS LIST (METALLIC) G Bell Helicopter SPEC - 160-014 ALTERNATE MATERIALS LIST (NONMETALLIC) G Bell Helicopter SPEC - 170-001 SUPERSESSION/ALTERNATE PARTS LIST U Bell Helicopter SPEC - 206-947-002 FINISH SPECIFICATION FOR BELL LIGHT COMMERCIAL MODELS 206 SERIES, 222/230/430, M-400, 407, 427 AND 429 L Bell Helicopter SPEC - 299-099-031 FINISH CODE AA Bell Helicopter SPEC - 299-099-900 APPROVED SOURCE LIST CK Bell Helicopter SPEC - 299-947-320 ADHESIVE FILM AND PRIMER SYSTEM, INTERMEDIATE CURE TEMPERATURE (260°F to 290°F) (SERVICE TEMPERATURE -67°F to 225°F) L Bell Helicopter SPEC - 299-947-739 DRAWING INTERPRETATION AND GENERAL REQUIREMENTS M Bell Helicopter SPEC - 512-947-002 FINISH SPECIFICATION FOR RELENTLESS MODEL 525 BASIC Bell Helicopter SPEC - BPS4001 CHROMIC ACID ANODIZING O Bell Helicopter SPEC - BPS4006 CADMIUM PLATING, ELECTRODEPOSITED U Bell Helicopter SPEC - BPS4012 ASSEMBLING THERMAL FITS D Bell Helicopter SPEC - BPS4019 RIVETING PROCEDURE FOR STANDARD SOLID AND TUBULAR OVAL HEAD RIVETS B Bell Helicopter SPEC - BPS4036 RIVETS, BLIND, INSTALLATION PROCEDURES FOR D Bell Helicopter SPEC - BPS4038 INSTALLATION OF HI-SHEAR RIVETS AND HI-LOK/HI-LITE FASTENERS G Bell Helicopter SPEC - BPS4050 MARKING AIRCRAFT PARTS Y Bell Helicopter SPEC - BPS4084 BLACK OXIDE TREATMENT OF STEELS L Bell Helicopter SPEC - BPS4089 FLUORESCENT PENETRANT INSPECTION M Bell Helicopter SPEC - BPS4102 PACKAGING AND/OR PRESERVATION OF AIRCRAFT PARTS AND ASSEMBLIES FOR STOCK P Bell Helicopter SPEC - BPS4138 CHEMICAL CLEANING OF AIRCRAFT MATERIALS E Bell Helicopter SPEC - BPS4139 HEAT TREATMENT OF ALUMINUM ALLOYS P Bell Helicopter SPEC - BPS4140 HEAT TREATMENT OF STEEL G Bell Helicopter SPEC - BPS4182 CHEMICAL FILM TREATMENT F Bell Helicopter SPEC - BPS4310 APPLICATION OF SOLID FILM LUBRICANTS F Bell Helicopter SPEC - BPS4352 SURFACE PREPARATION OF MATERIALS FOR ADHESIVE BONDING L Bell Helicopter SPEC - BPS4357 REMOVAL OF ORGANIC FINISHES J Bell Helicopter SPEC - BPS4367 ZINC CHROMATE PRIMER, APPLICATION OF B Bell Helicopter SPEC - BPS4387 HARD ANODIC COATING OF ALUMINUM ALLOYS D Bell Helicopter SPEC - BPS4436 CADMIUM COATING (VACUUM DEPOSITED) A Bell Helicopter SPEC - BPS4445 EXTERNAL ROLL THREADING OF METALS A Bell Helicopter SPEC - BPS4451 APPLICATION OF EPOXY PRIMER G Bell Helicopter SPEC - BPS4453 CONDUCTIVITY INSPECTION OF WROUGHT ALUMINUM ALLOYS TO DETERMINE HEAT TREAT CONDITION C Bell Helicopter SPEC - BPS4458 STRUCTURAL ADHESIVE BONDING USING INTERMEDIATE - HIGH PERFORMANCE SUPPORTED AND UNSUPPORTED ADHESIVE FILM E Bell Helicopter SPEC - BPS4464 APPLICATION OF POLYURETHANE COATING B Bell Helicopter SPEC - BPS4467 HARDNESS TESTING AND REQUIREMENTS OF METALS C Bell Helicopter SPEC - BPS4515 INSTALLATION OF FASTENERS IN COMPOSITE/COMPOSITE AND COMPOSITE/METAL STRUCTURES D Bell Helicopter SPEC - BPS4555 THIN FILM SULFURIC ACID ANODIZE BASIC Bell Helicopter SPEC - BPS4569 DRILLING OF HOLES IN METALLIC MATERIALS BASIC Bell Helicopter SPEC - QPS101 BHT APPROVED PROCESS SOURCES 68 Boeing PL - MX081P ALUMINUM ALLOY EXTRUDED BAR, SEE RM PL REPORT FOR COMPLETE DEFINITION F Boeing SPEC - 787N4-1710 CATIA V5-MODEL BASED DEFINITION (MBD) CONSTRUCTION-GENERAL AK Boeing SPEC - 787N9-2116 787 PROGRAM SUBSTITUION AND EQUIVALENTS FOR MATERIALS, PROCESSES, AND MECHANICAL STANDARD PARTS Y Boeing SPEC - AND10133 ANGLE - EQUAL LEG EXTRUDED 4 Boeing SPEC - BAC001PREF PREFACE Y Boeing SPEC - BAC1503 ANGLE, 90 DEGREE, ALUMINUM EXTRUDED BE Boeing SPEC - BAC1505 TEE, 90 DEGREE, ALUMINUM, EXTRUDED BE Boeing SPEC - BAC1514 ANGLE, ACUTE AND OBTUSE, ALUMINUM, EXTRUDED BG Boeing SPEC - BAC1518-563 I SECTION - Boeing SPEC - BAC1530 MISCELLANEOUS, RUBBER, FABRIC - COVERED OR REINFORCED AF PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5000 SEALING, GENERAL BA 1-17, 6-290, 9-64, 6- 294, 9-66, 1-14, 6-278, 6-280, 6-281, 6-282, 6- 283, 6-284, 6-285, 6- 286, 6-288, 8-22, 9-61, 6-279, 6-315, 1-11, 1- 15, 1-16, 6-313, 9-21, 1- 12, 1-13 Boeing SPEC - BAC5001 FLUID LINES, FITTINGS AND PRESSURE TESTING N 6-155, 9-3 Boeing SPEC - BAC5001-1 CUT OFF, END FORMING, HANDLING AND MARKING OF TUBES AND DUCTS H 6-32, 9-5, 9-2, 9-3, 6- 23, 8-5 Boeing SPEC - BAC5001-10 TUBE INSTALLATION, TUBE FITTING TIGHTENING AND TUBE CLAMPING K 1-4, 1-6, 1-10, 1-7, 1-5, 1-9, 1-8 Boeing SPEC - BAC5001-11 INSTALLATION OF EXTERNALLY SWAGED HYDRAULIC FITTINGS H 1-3, 1-4 Boeing SPEC - BAC5001-12 FORMING AND STRAIGHTENING OF DUCTS D 9-3 Boeing SPEC - BAC5001-2 PRESSURE TESTING OF TUBE AND DUCT ASSEMBLIES; AUTOFRETTAGE OF TUBE ASSEMBLIES J 9-8, 6-17, 6-11 Boeing SPEC - BAC5001-3 TUBE BENDING J 6-36, 1-4, 9-1 Boeing SPEC - BAC5001-4 FLARELESS TUBE END FABRICATION N 6-48, 9-4, 9-9 Boeing SPEC - BAC5001-5 COUPLING FERRULE DUCT END FABRICATION R 6-24, 6-39, 6-32, 6-33, 6-35, 6-41, 6-34, 9-1, 9- 2 Boeing SPEC - BAC5001-6 LUBRICATION OF FITTINGS; INSTALLATION OF FITTINGS IN BOSSES (PORTS) AND BULKHEADS M 8-5, 9-13, 9-17, 9-21, 9- 25, 9-26 Boeing SPEC - BAC5001-7 INSTALLATION OF HOSE ASSEMBLIES E 9-1, 9-3, 9-5, 9-6, 9-8, 8- 2, 6-12 Boeing SPEC - BAC5004 INSTALLATION OF PERMANENT FASTENERS R 6-139, 6-130, 6-131, 6- 118 Boeing SPEC - BAC5004-1 SOLID RIVET INSTALLATION U 6-89, 6-88 9-31, 9-6, 8- 20, 8-21 Boeing SPEC - BAC5004-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION AM 1-3, 1-4, 1-5, 1-7, 6- 162, 9-31, 6-106, 6- 168, 1-6, 6-82, 6-131, 6- 160, 6-163 Boeing SPEC - BAC5004-3 BLIND FASTENER INSTALLATION J 9-22, 9-21, 9-23, 6-20, 6-21, 8-14, 8-13 Boeing SPEC - BAC5004-4 ONE SIDED INSTALLATION BOLTS - INSTALLATION AND INSPECTION A 6-1 Boeing SPEC - BAC5008 APPLICATION OF LUBRICANTS V 9-28, 1-11, 1-7, 1-8 Boeing SPEC - BAC5009 BOLT AND NUT INSTALLATION AG 1-1, 9-75, 8-25, 9-89, 6- 179, 8-27, 8-26, 9-82, 9- 88, 9-81, 9-83, 9-84, 9- 85, 9-86, 9-87, 6-154 Boeing SPEC - BAC5010 APPLICATION OF ADHESIVES AB 9-51, 9-59, 1-10 Boeing SPEC - BAC5011 APPLICATION OF RETAINING COMPOUNDS E 9-11, 9-12, 8-1, 9-9 Boeing SPEC - BAC5014 INSTALLATION OF HOSE, DUCTS AND CLAMPS K 9-6, 9-2, 8-3 Boeing SPEC - BAC5018 INSTALLATION OF SAFETYING DEVICES N 8-5, 8-11, 8-10, 9-5 Boeing SPEC - BAC5019 CHROMIC ACID ANODIZING AA 6-135, 6-145, 1-5, 1-6, 1-7, 1-8 Boeing SPEC - BAC5022 SULFURIC ACID ANODIC FILMS M 1-5, 9-1 Boeing SPEC - BAC5024 TIN-LEAD SOLDERING D 6-6, 6-7 Boeing SPEC - BAC5030 SMOOTHING AND FAIRING P 1-6, 1-7 Boeing SPEC - BAC5032 GRINDING OF CHROMIUM PLATE G 6-12, 6-9, 6-11 Boeing SPEC - BAC5034 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES T 1-7, 1-10, 1-9, 1-8 Boeing SPEC - BAC5034-1 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH COATINGS M 1-1, 1-2 Boeing SPEC - BAC5034-2 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS AND ASSEMBLIES WITH NONADHERENT FILM AND SHEET COVERINGS J 1-4, 1-2, 1-1, 1-3 Boeing SPEC - BAC5034-3 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS AND ASSEMBLIES WITH PRESERVATIVES E 1-1, 1-2 Boeing SPEC - BAC5034-4 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH PRESSURE SENSITIVE TAPE P Boeing SPEC - BAC5047 FLUID TIGHT FASTENER INSTALLATION M 6-106, 9-2, 6-107, 6- 104, 6-109, 6-108 Boeing SPEC - BAC5047-1 FLUID TIGHT FASTENER INSTALLATION F 6-25, 6-27, 9-1, 6-36, 6- 43, 6-45 Boeing SPEC - BAC5047-2 FLUID TIGHT FASTENER INSTALLATION IN FATIGUE RATED STRUCTURE G 6-103, 6-21, 6-29, 6-51, 6-65, 6-86, 6-87, 6-93, 6-100, 6-101, 6-114, 6- 112, 6-113, 6-106, 6- 115 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5049 DIMPLING AND COUNTERSINKING K 6-27, 6-19, 6-21, 9-2, 9- 1, 6-23, 6-22, 6-28, 6- 26, 6-25 Boeing SPEC - BAC5056 FABRICATION OF FLAME SPRAYED ALUMINUM COATINGS FOR STRUCTURAL PLASTIC PARTS T 6-37 Boeing SPEC - BAC5058 RIVETING IN TITANIUM D 9-3, 6-5, 6-6, 9-16, 6-7, 6-8 Boeing SPEC - BAC5060 INSTALLATION OF INTERFERENCE FIT, RADIUS LEAD-IN FASTENERS J 6-63, 6-48 Boeing SPEC - BAC5063 FASTENER INSTALLATION IN COMPOSITE STRUCTURES T 6-117, 8-16, 9-58, 8-18, 9-59, 8-17, 9-12, 6-113 Boeing SPEC - BAC5063-1 SOLID RIVET INSTALLATION IN COMPOSITE STRUCTURES E 8-2, 6-5, 8-1, 6-4 Boeing SPEC - BAC5063-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION IN COMPOSITE STRUCTURES F 6-16, 6-44, 6-46, 8-8, 6- 43, 6-47, 8-7 Boeing SPEC - BAC5063-3 BLIND FASTENER INSTALLATION IN COMPOSITE STRUCTURES C 8-4, 8-5, 6-9 Boeing SPEC - BAC5063-4 BOLT AND NUT INSTALLATION IN COMPOSITE STRUCTURES E 8-4, 9-1, 6-58, 8-3, 1-1 Boeing SPEC - BAC5063-5 MISCELLANEOUS FASTENER INSTALLATION IN COMPOSITE STRUCTURES B 6-1 Boeing SPEC - BAC5064 INSTALLATION OF INSERTS, PANEL FASTENERS AND RELATED HARDWARE F 9-27, 9-31, 8-6, 9-35, 8- 7, 9-44, 8-8, 8-10, 6-33, 6-34, 9-1, 8-17, 8-11, 6- 42, 6-40, 8-15, 6-50, 9- 46, 6-45, 8-16, 6-49, 6- 56, 6-48, 6-46, 6-54, 6- 53, 6-52, 6-55, 6-57 Boeing SPEC - BAC5085 INSTALLATION OF MECHANICALLY ATTACHED AND ADHESIVE BONDED INSERTS AND SPACERS IN SANDWICH PANELS G 1-10, 6-57, 6-58, 1-7 Boeing SPEC - BAC5088 TAB AND SLOT JOINTS IN SANDWICH PANELS, ASSEMBLY AND BONDING OF D Boeing SPEC - BAC5110 WRAPPED WIRE ELECTRICAL CONNECTIONS H 6-16, 6-14 Boeing SPEC - BAC5114 ENHANCED PROCESS CONTROL FOR CNC MACHINING E 1-1 Boeing SPEC - BAC5117 ELECTRICAL BONDING AG 9-74, 9-9, 8-9, 9-71, 9- 73 Boeing SPEC - BAC5117-1 ELECTRICAL BONDING OF RECEPTACLES K 1-6, 1-3, 1-4, 1-5, 6-8 Boeing SPEC - BAC5117-10 ELECTRICAL BONDING-CLAMP INSTALLATION ON TUBES/CONDUIT G 1-1 Boeing SPEC - BAC5117-11 ELECTRICAL BONDING - FITTING AND COUPLING INSTALLATIONS G 6-2, 6-3, 6-4 Boeing SPEC - BAC5117-12 ELECTRICAL BONDING - BULKHEAD FITTING INSTALLATION D 6-2, 9-6, 6-3, 6-4, 6-5 Boeing SPEC - BAC5117-13 ELECTRICAL BONDINGS OF FASTENERS TO CONDUCTIVE FINISHES ON COMPOSITES D 6-5 Boeing SPEC - BAC5117-14 ELECTRICAL BONDING OF COMPOSITE PANELS D 6-3, 6-2, 6-4 Boeing SPEC - BAC5117-19 ELECTRICAL BONDING THROUGH FASTENERS - INTERFERENCE FIT A 6-7 Boeing SPEC - BAC5117-2 BACS53B OR M83454/4 PREINSTALLED GROUND STUD INSTALLATION K 1-2, 1-1, 8-2 Boeing SPEC - BAC5117-3 STANDARD PREINSTALLED GROUND STUD INSTALLATION G 1-3, 1-1, 1-2 Boeing SPEC - BAC5117-4 DIRECT GROUND STUD INSTALLATION J 8-3, 9-10, 9-11, 9-13, 9- 12 Boeing SPEC - BAC5117-5 TERMINAL INSTALLATION ON PREINSTALLED GROUND STUDS F 9-6, 6-7 Boeing SPEC - BAC5117-6 ELECTRICAL FAYING SURFACE BONDS M 9-9, 9-17, 9-19, 9-21 Boeing SPEC - BAC5117-7 DRIVEN RIVET ELECTRICAL BOND H Boeing SPEC - BAC5117-8 ELECTRICAL BONDING - GROUND BLOCK INSTALLATION G Boeing SPEC - BAC5117-9 ELECTRICAL BONDING - STATIC DISCHARGER ASSEMBLY INSTALLATION D Boeing SPEC - BAC5122-1 ASSEMBLY OF CONNECTORS CLAMPED TO BRAIDED OUTER CONDUCTOR OF COAXIAL CABLE G Boeing SPEC - BAC5128 ELECTRICAL/ELECTRONIC ASSEMBLIES, REQUIREMENTS FOR E 6-29, 6-28, 1-3 Boeing SPEC - BAC5147 INSERTION AND REMOVAL OF FIBER OPTIC TERMINI C 9-1 Boeing SPEC - BAC5148 CLEANING PROCEDURE FOR FIBER OPTIC TERMINI AND FIBER OPTIC SLEEVE HOLDERS H Boeing SPEC - BAC5152 IDENTIFICATION OF ELECTRIC WIRE AND WIRE BUNDLES AK 9-29, 9-42, 9-40 Boeing SPEC - BAC5153 ASSEMBLY OF ELECTRONIC TERMINATIONS T 9-30, 6-204 Boeing SPEC - BAC5155 HEAT-SHRINKABLE MATERIALS ON ELECTRIC WIRING T 9-8, 9-20 ,9-26, 9-21, 9- 24 Boeing SPEC - BAC5157 FABRICATION OF ELECTRIC WIRE BUNDLES T 9-29, 8-22, 8-23 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5158 INSTALLATION OF ELECTRIC WIRING AA 8-15, 1-3, 1-4, 1-5, 8-11 Boeing SPEC - BAC5162 ASSEMBLY OF ELECTRIC CONNECTORS Y 9-5 Boeing SPEC - BAC5162-44 ASSEMBLY OF "AMP-TAB" TERMINAL CONNECTORS F 6-7, 6-8 Boeing SPEC - BAC5162-47 ASSEMBLY OF MIL-C-38999 CONNECTORS C 8-2, 8-3, 8-4, 9-2, 9-13 Boeing SPEC - BAC5162-5 ASSEMBLY OF MIL-DTL-26500 CIRCULAR CONNECTORS R 9-2 Boeing SPEC - BAC5162-52 ASSEMBLY OF BACS16W, X RELAY SOCKETS FRONT RELEASE CONTACTS H 6-16 Boeing SPEC - BAC5162-53 ASSEMBLY OF BOEING 10-61492, CANNON FR(), FV() AND FLIGHT FC, FH SERIES CONNECTORS D 6-8, 6-9 Boeing SPEC - BAC5162-57 ASSEMBLY OF BACC63 BD, BE, BW, BY, CD AND CE CONNECTORS D 6-14, 6-16, 6-21, 6-23, 9-2 Boeing SPEC - BAC5162-59 ASSEMBLY OF BACC66E, F, G, H, J, AND K CONNECTORS (ARINC 600 SERIES) G Boeing SPEC - BAC5162-68 ASSEMBLY OF BACC65AJ(), AK(), AL(), AM() AND S280W557-() RECTANGULAR CONNECTORS H Boeing SPEC - BAC5162-71 ASSEMBLY AND INSTALLATION OF THE BACM15J() OR BURNDY RBDSC-() PROGRAM SWITCH MODULE B Boeing SPEC - BAC5162-72 ASSEMBLY OF BACC65AA AND BACC65AB CONNECTORS F 9-4 Boeing SPEC - BAC5162-73 ASSEMBLY OF BACC65AN, BACC65AP, BACC65AV, AND BACC65AW CONNECTORS E Boeing SPEC - BAC5162-9 ASSEMBLY OF MIL-C-26482 SERIES 1 AND MIL-C-81703 SERIES 2 CONNECTORS G 9-1, 9-2 Boeing SPEC - BAC5165 ASSEMBLY OF BACM15C MODULAR TERMINAL JUNCTION BLOCKS K Boeing SPEC - BAC5166 ASSEMBLY OF M81714 TERMINAL JUNCTION DEVICES J Boeing SPEC - BAC5170 ASSEMBLY OF BACC65M, N, P, AND R CONNECTORS AND BACS52H SPLICE E Boeing SPEC - BAC5179 INSTALLATION OF THE S280W701 FIBER OPTIC CABLE ASSEMBLIES A 6-2, 6-3, 9-2 Boeing SPEC - BAC5183 ASSEMBLY OF ARINC 629 COUPLER PANELS F Boeing SPEC - BAC5196-4 MANUFACTURING OF PRINTED-WIRING BOARDS AND ASSEMBLIES G 6-11 Boeing SPEC - BAC5217 PREPARATION AND MOUNTING OF SURFACE MOUNTED DEVICES FOR REFLOW SOLDERING D 6-7 Boeing SPEC - BAC5218 ELECTRICAL/ELECTRONIC SOLDERING USING VAPOR PHASE REFLOW G Boeing SPEC - BAC5219 APPLICATION OF SILICONE CONFORMAL COATING J 9-2, 8-1, 9-11, 9-10, 9- 13, 6-1, 9-14 Boeing SPEC - BAC5224 STANDARD PROCEDURES FOR CORRECTION OF SURFACE MOUNTED DEVICE BOARDS AND ASSEMBLIES F 8-1, 6-8, 9-18 Boeing SPEC - BAC5227 APPLICATION OF SOLDER PASTE E 9-10, 9-11, 6-6 Boeing SPEC - BAC5236 DOD COMPLIANT - GENERAL SPECIFICATION FOR PRINTED-WIRING ASSEMBLIES D 9-10, 9-13, 8-1 Boeing SPEC - BAC5242 DOD COMPLIANT - HAND SOLDERING F 9-8, 9-7, 9-11 Boeing SPEC - BAC5245 ASSEMBLY OF S280W555 TERMINAL JUNCTION SYSTEM AA Boeing SPEC - BAC5300 FORMING, STRAIGHTENING AND FITTING METAL PARTS N 8-5, 9-22 Boeing SPEC - BAC5300-1 SURFACE AND EDGE INTEGRITY OF METAL PARTS K 6-1, 9-2, 6-6 Boeing SPEC - BAC5300-2 METAL PART FORMING, STRAIGHTENING AND FITTING K 6-2, 6-1, 8-4, 8-2 Boeing SPEC - BAC5305 APPLICATION OF ALUMINUM FOIL MARKERS T 1-7, 1-9, 1-8 Boeing SPEC - BAC5306 MARKING OF PANELS AND DIRECT SILKSCREENING N Boeing SPEC - BAC5307 PART MARKING AH 1-11, 1-20, 6-316, 9- 108, 9-82, 9-99, 1-12, 1- 21, 1-19, 1-14, 9-117, 6- 289, 1-18, 1-17 Boeing SPEC - BAC5308 APPLICATION OF STENCIL AND INSIGNIA MARKINGS J 1-6, 1-7 Boeing SPEC - BAC5312 APPLICATION OF PLASTIC FILM MARKERS W 8-6, 1-8, 1-9, 1-7, 6-51 Boeing SPEC - BAC5316 MANUFACTURE OF MARKERS AND PLACARDS Y 9-15, 9-14 Boeing SPEC - BAC5317 FIBER REINFORCED COMPOSITE PARTS K 9-9, 6-213, 6-200, 1-9, 1-8, 1-6, 1-5, 1-7, 6- 192, 6-174, 9-14 Boeing SPEC - BAC5317-1 CARBON AND ARAMID FIBER REINFORCED COMPOSITE PARTS, 350 F (177 C) CURE J 9-2, 9-1, 1-5, 1-6, 1-4 Boeing SPEC - BAC5317-2 MANUFACTURE OF LOW TEMPERATURE AUTOCLAVE CURED EPOXY STRUCTURAL PARTS K 1-8, 1-6, 1-5, 1-7 Boeing SPEC - BAC5317-3 MANUFACTURING OF HIGH TEMPERATURE RESISTANT EPOXY STRUCTURAL PARTS K 1-5, 1-4, 1-7, 1-6 Boeing SPEC - BAC5317-4 ADVANCED COMPOSITE LAMINATE AND HONEYCOMB SANDWICH STRUCTURAL PARTS - 350 F (177 C) CURE K 1-7, 1-8, 1-6, 1-5, 6-24, 9-7 Boeing SPEC - BAC5317-5 MANUFACTURE OF ADVANCED COMPOSITE STRUCTURAL PARTS, 250 F CURE K 1-3 Boeing SPEC - BAC5317-6 MANUFACTURE OF PERFORATED CARBON FIBER REINFORCED PARTS, 350 F (177 C) CURE E 6-37, 1-2 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5319 APPLICATION OF DECORATIVE SURFACES TO INTERIOR PANELS G Boeing SPEC - BAC5321 INJECTION MOLDING OF THERMOPLASTIC PARTS D Boeing SPEC - BAC5322 PERPARATION OF INTERIOR PART SURFACES PRIOR TO SUBSEQUENT FINISHING F 1-3 Boeing SPEC - BAC5325 APPLICATION OF NONCHROMATED PRIMER ON COMPOSITE, PLASTIC, TITANIUM AND CRES SURFACES R Boeing SPEC - BAC5326 MANUFACTURE OF COMPRESSION MOLDED EXTERIOR PARTS USING FIBER REINFORCED SHEET MOLDING COMPOUND C Boeing SPEC - BAC5331 MANUFACTURING OF AIR DUCTS, LAMINATES, AND SANDWICH CONSTRUCTION USING FABRIC REINFORCED THERMOSETTING RESINS K 1-2, 1-1 Boeing SPEC - BAC5332 INSTALLATION OF MOLDABLE PLASTIC SHIM E 8-6, 6-8, 6-23, 8-7, 8-5 Boeing SPEC - BAC5333 SUPERPLASTIC FORMING OF 2005 BARE AND ALCLAD ALUMINUM ALLOY SHEET B 6-1, 6-2, 8-1, 6-3 Boeing SPEC - BAC5335 APPLICATION OF EXPANDED METAL FOIL LIGHTNING STRIKE PROTECTION IN COMPOSITE PART FABRICATION B 6-10, 6-11, 9-2 Boeing SPEC - BAC5336 FABRICATION OF RESIN TRANSFER MOLDED (RTM) FIBER REINFORCED COMPOSITE PARTS B Boeing SPEC - BAC5337 APPLICATION OF NON-STRUCTURAL WET LAYUP PLIES TO COMPOSITE PANELS D Boeing SPEC - BAC5338 ACID ETCH AND ELECTROCHEMICAL ETCH MARKING H 8-2 Boeing SPEC - BAC5339 FABRICATION OF THERMAL/ACOUSTIC INSULATION BLANKETS B 9-1, 9-3, 6-6 Boeing SPEC - BAC5346 FABRICATION OF EROSION RESISTANT THERMAL PROTECTION SYSTEMS C Boeing SPEC - BAC5348 PROCESSING OF REINFORCED THERMOPLASTIC LAMINATES R 1-1 Boeing SPEC - BAC5351 FABRICATION OF SPLICE JOINTS IN FOAM BACKED DECORATIVE VINYL SHEET C Boeing SPEC - BAC5352 FABRICATION OF HIGH TEMPERATURE THERMAL INSULATION BLANKETS C Boeing SPEC - BAC5355 FABRICATION OF FLAME PROPAGATION RESISTANT AND BURN THROUGH RESISTANT THERMAL/ACOUSTIC INSULATION BLANKETS H 6-15, 9-1 Boeing SPEC - BAC5357 APPLICATION OF NON-CHROMATED INTEGRAL FUEL TANK COATING ON COMPOSITE, TITANIUM AND CRES SURFACES B Boeing SPEC - BAC5402 OXYGEN SYSTEMS M 6-43, 9-7, 8-8, 6-70 Boeing SPEC - BAC5408 VAPOR DEGREASING P 8-22, 8-21 Boeing SPEC - BAC5412 INSULATING AND JOINING AIR DUCTS K Boeing SPEC - BAC5423 PENETRANT METHODS OF INSPECTION Y 6-155, 8-17 Boeing SPEC - BAC5424 MAGNETIC PARTICLE INSPECTION U 9-12, 8-17, 9-9, 6-40, 8- 22, 9-10 Boeing SPEC - BAC5430 FABRICATION AND INSTALLATION OF RESIN BONDED LAMINATED SHIMS AND SOLID FILLERS N 8-3, 6-30, 6-29, 9-9, 9- 10 Boeing SPEC - BAC5432 CASTING AND POTTING WITH RESINS AJ 9-7, 6-65, 1-7, 9-27, 9- 26, 9-25, 8-11 Boeing SPEC - BAC5435 BEARING INSTALLATION AND RETENTION AA 8-10, 8-11, 6-75, 6-74, 6-62, 9-6, 9-8, 9-11, 9- 16, 9-18, 9-19 Boeing SPEC - BAC5436 ETCH INSPECTION OF GROUND OR MACHINED STEEL PARTS J 6-72, 9-2, 6-74, 1-10, 1- 7, 1-8, 1-9 Boeing SPEC - BAC5437 SEWING P Boeing SPEC - BAC5439 ULTRASONIC INSPECTION J 9-3, 9-5, 9-4, 6-22 Boeing SPEC - BAC5439-1 ULTRASONIC INSPECTION OF WELDS A 9-1, 6-1 Boeing SPEC - BAC5439-3 ULTRASONIC INSPECTION OF WROUGHT MATERIALS, IMMERSION TESTING A Boeing SPEC - BAC5440 HOLE PREPARATION, MACHINING, AND GRINDING OF STEELS L 6-46, 9-5, 6-51 Boeing SPEC - BAC5444 BONDING ASSEMBLY AID FOR SHIMS, FILLERS, AND DETAILS H 1-5 Boeing SPEC - BAC5449 VACUUM BAG MOLDING GLASS FABRIC REINFORCED EPOXY RESIN STRUCTURAL LAMINATED PRODUCTS E Boeing SPEC - BAC5481 PROCESSING OF LUOROPPOLYMERS D 6-2, 6-3, 9-1 Boeing SPEC - BAC5485 HANDLING OF ELECTRICAL/ELECTRONIC PARTS AND ASSEMBLIES AD 1-11, 9-13, 8-1, 9-25, 6- 45, 8-3, 9-56 Boeing SPEC - BAC5492 MACHINING AND CUTTING TITANIUM T 1-5, 1-4, 9-19 Boeing SPEC - BAC5503 SEALING SANDWICH ASSEMBLIES F 8-3, 9-1, 9-2, 6-15 Boeing SPEC - BAC5504 INTEGRAL FUEL TANK STRUCTURE SEALING AB 6-123, 6-121, 6-119, 6- 116, 6-106, 6-115, 9-26, 9-22, 9-23, 9-24, 9-25, 6-108 Boeing SPEC - BAC5505 WINDOW INSTALLATION F 9-2, 9-3 Boeing SPEC - BAC5506 INSTALLATION OF ELASTOMERIC SEALS K 1-6, 1-5 Boeing SPEC - BAC5513 MOLDING OF BUTYL RUBBER ON ELECTRICAL CABLE CONNECTORS A PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES AT 1-13, 1-17, 1-10, 1-9, 1- 8, 1-7, 1-16, 1-12 Boeing SPEC - BAC5514-5137 STRUCTURAL BONDING WITH BMS5-137 ADHESIVES L 1-4 Boeing SPEC - BAC5514-542 STRUCTURAL BONDING METAL-TO-METAL WITH BMS5- 42 ADHESIVES AB 1-1, 1-3 Boeing SPEC - BAC5514-551 STRUCTURAL BONDING WITH MODERATE TEMPERATURE CURING ADHESIVE (BMS5-51) AD Boeing SPEC - BAC5514-570 STRUCTURAL BONDING WITH BMS5-70 Y 1-7 Boeing SPEC - BAC5514-580 STRUCTURAL BONDING WITH MODERATE TEMPERATURE CURING ADHESIVE (BMS5-80) V Boeing SPEC - BAC5514-589 APPLICATION OF CORROSION INHIBITING ADHESIVE PRIMER AA 1-8, 1-5, 1-7 Boeing SPEC - BAC5514-590 BONDING WITH FOAMING ADHESIVES T Boeing SPEC - BAC5516 WINDOW SILICONE SEAL MOLDING AND AEROSMOOTHING G 9-1, 6-13, 6-12 Boeing SPEC - BAC5524 MANUFACTURE OF GLASS/EPOXY LAMINATES AND SANDWICH PANELS USING 260F CURE R 1-6 Boeing SPEC - BAC5527 APPLICATION OF SECONDARY FUEL BARRIER R Boeing SPEC - BAC5530 FAIRING COMPOUND APPLICATION M Boeing SPEC - BAC5534 ROTATIONAL MOLDING OF THERMOPLASTIC PARTS N Boeing SPEC - BAC5548 ADHESIVE BONDING TO GRAPHITE-EPOXY COMPONETS F 9-6 Boeing SPEC - BAC5550 POTTING OF ELECTRIC CONNECTORS L 6-43, 9-1, 9-3 Boeing SPEC - BAC5555 PHOSPHORIC ACID ANODIZING OF ALUMINUM FOR STRUCTURAL BONDING V 6-118, 9-2, 6-125, 6- 126, 6-129, 6-127, 6- 133, 6-132, 8-4, 6-131, 9-1, 6-122, 8-3, 8-5 Boeing SPEC - BAC5556 MANUFACTURE OF LOW TEMPERATURE CURED EPOXY STRUCTURAL PARTS, VACUUM BAG PROCESS C 8-3, 9-1, 8-4, 6-2, 6-4, 6- 5 Boeing SPEC - BAC5564 FABRICATION OF CRUSHED CORE AND MOP SANDWICH PANELS M Boeing SPEC - BAC5565 VACUUM BAG AND MULTIPLE OPENING PRESS PROCESS FOR PHENOLIC SANDWICH PANELS AND LAMINATES P Boeing SPEC - BAC5568 THERMOFORMING OF THERMOPLASTIC SHEET L Boeing SPEC - BAC5572 NON-STRUCTURAL INTERIOR NOMEX HONEYCOMB CORE SANDWICH PANELS AND LAMINATES USING KEVLAR - 49 FABRIC PREPREG H Boeing SPEC - BAC5578 MANUFACTURE OF ADVANCED CARBON FIBER REINFORCED ADVANCED COMPOSITE STRUCTURE WITH TOUGHENED EPOXY SYSTEMS, +350F CURE N 1-9, 1-11, 6-181, 6-190, 1-10, 1-12, 1-13, 1-16 Boeing SPEC - BAC5583 PROCESS FOR POTTING INSERTS AND EDGES INTO SANDWICH PANELS K 1-5, 1-4 Boeing SPEC - BAC5596 ENGINEERING REQUIREMENTS FOR POSITIVE PRESSURE LAMINATION OF INTERIOR DECORATIVE LAMINATES J Boeing SPEC - BAC5602 HEAT TREATMENT OF ALUMINUM ALLOYS AH 1-6, 1-8, 1-9, 6-182, 6- 184, 1-7, 6-203 Boeing SPEC - BAC5603 FABRIC SURFACE COVERING AND FINISHING A Boeing SPEC - BAC5605 INSTALLATION OF TUBING INSULATION F 9-1 Boeing SPEC - BAC5607 PROCESS SPECIFICATION FOR PROTECTIVE OIL COATING FOR TANKS Y Boeing SPEC - BAC5609 DOW 7 TREATMENT OF MAGNESIUM ALLOYS F 6-5, 6-6, 8-11, 8-12, 6- 7, 6-9 Boeing SPEC - BAC5611 HEAT TREATMENT OF COPPER AND COPPER ALLOYS B 6-6, 6-2, 6-3, 6-5 Boeing SPEC - BAC5612 SURFACE TREATING MAGNESIUM ALLOY BY DOW #9 WITH EXTERNAL POWER A Boeing SPEC - BAC5613 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS V 9-15, 6-57, 6-58, 6-59, 9-31, 9-32, 8-6 Boeing SPEC - BAC5616 HEAT TREATMENT OF NICKEL-BASE AND COBALT-BASE ALLOYS K Boeing SPEC - BAC5617 HEAT TREATMENT OF ALLOYS STEELS W 8-19, 8-23, 8-22, 9-14, 9-12, 9-13, 8-21 Boeing SPEC - BAC5618 CARBURIZING AND NITRIDING OF STEELS F Boeing SPEC - BAC5619 HEAT TREATMENT OF CORROSION RESISTANT STEEL L 9-16, 9-17, 9-15, 1-5, 1- 6 Boeing SPEC - BAC5620 INDUCTION HEAT TREATMENT OF AIRCRAFT STEELS B 6-1 Boeing SPEC - BAC5621 TEMPERATURE CONTROL FOR PROCESSING OF MATERIALS M 8-6 Boeing SPEC - BAC5622 ELECTROPOLISHING AND ELECTROCHEMICAL DEBURRING C Boeing SPEC - BAC5625 SURFACE TREATMENTS FOR FERROUS ALLOYS H 6-71, 6-70, 9-1, 6-69, 1- 3, 1-4, 1-5, 6-68 Boeing SPEC - BAC5626 COLORED CHEMICAL CONVERSION COATINGS FOR ALUMINUM C 9-11, 9-16, 9-27, 9-28, 9-30, 9-31 Boeing SPEC - BAC5629 APPLICATION OF URETHANE EXTERIOR COATINGS F Boeing SPEC - BAC5632 BORIC ACID - SULFURIC ACID ANODIZING G 1-3 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5636 SUPERPLASTIC FORMING OF TITANIUM ALLOY SHEET H 6-4, 9-3 Boeing SPEC - BAC5637 ZINC-NICKEL ALLOY PLATING F Boeing SPEC - BAC5639 APPLICATION OF ANTI-STATIC COATINGS C 6-18 Boeing SPEC - BAC5640 NITRIDING OF STEEL B 1-1, 1-2, 1-3 Boeing SPEC - BAC5641 CARBURIZING OF CARBON AND ALLOY STEELS D Boeing SPEC - BAC5642 HOT ISOSTATIC PRESSING (HIP) OF CASTINGS A 9-2 Boeing SPEC - BAC5647 ASSEMBLY OF CIRCULAR JOINTS BY ELECTROMAGNETIC COMPRESSION FORMING B Boeing SPEC - BAC5648 MACHINING OF COPER BERYLLIUM ALLOYS - 9-1, 6-1 Boeing SPEC - BAC5649 PROCESS FOR FORMING BAC1522 PROFILE TUBE EXTRUSIONS C 6-3 Boeing SPEC - BAC5650 HARDNESS TESTING E 6-4, 6-5, 6-8, 8-2 Boeing SPEC - BAC5651 EDDY CURRENT ELECTRICAL CONDUCTIVITY INSPECTION D Boeing SPEC - BAC5652 INSPECTION OF CASTINGS B 8-1 Boeing SPEC - BAC5656 ABRASIVE WATERJET CUTTING FOR METALS AND METAL-COMPOSITE HYBRIDS E Boeing SPEC - BAC5657 MANUFACTURE OF CARBON FIBER REINFORCED COMPOSITE STRUCTURE BY AUTOMATED FIBER PLACEMENT, +350 F CURE EPOXY SYSTEMS F 1-1 Boeing SPEC - BAC5662 FRICTION STIR WELDING OF METALS B Boeing SPEC - BAC5663 SOL-GEL CONVERSION COATINGS FOR ALUMINUM ALLOYS D 6-1, 6-2 Boeing SPEC - BAC5664 LOW HYDROGEN EMBRITTLEMENT STYLUS ZINC- NICKEL ALLOY PLATING A Boeing SPEC - BAC5665 APPLICATION OF SOL-GEL CONVERSION COATINGS ON CORROSION RESISTANT ALLOYS D 6-7 Boeing SPEC - BAC5680 LOW HYRDROGEN EMBRITTLEMENT (LHE) ZINC-NICKEL ALLOY PLATING F Boeing SPEC - BAC5701 CADMIUM PLATING R 8-20, 8-24, 6-60, 8-23, 9-8 Boeing SPEC - BAC5705 APPLICATION OF FLOOR COVERING MATERIALS N 6-32 Boeing SPEC - BAC5706 APPLICATOIN OF ORGANIC FINISHES N 9-4, 6-13, 9-2 Boeing SPEC - BAC5709 HARD CHROMIUM PLATING Y 1-8, 1-6, 1-7 Boeing SPEC - BAC5710 APPLICATION OF SPECIAL PURPOSE COATINGS AF 1-10, 1-12, 1-11, 6-147, 9-25, 6-144 Boeing SPEC - BAC5716 PREPARATION OF COLORED ANODIC FILMS H Boeing SPEC - BAC5717 TIN COATING M 8-1, 1-5 Boeing SPEC - BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS AB 1-10, 1-11, 1-12, 1-4, 1- 5, 1-6, 1-9, 1-7, 1-8 Boeing SPEC - BAC5722 COPPER PLATING F Boeing SPEC - BAC5723 APPLICATION OF ORGANIC FINISHES HIGH SPEED A Boeing SPEC - BAC5724 APPLICATION OF SILICONIZED COATINGS TO MOLYBDENUM ALLOYS Y Boeing SPEC - BAC5725 STRIPPING ORGANIC MATERIALS K 1-5, 1-6, 1-8, 1-9 Boeing SPEC - BAC5728 ELECTROLESS NICKEL PLATING L 8-3, 6-15, 8-2, 8-1 Boeing SPEC - BAC5730 SHOT PEENING U 9-10, 8-20, 8-19, 1-3, 1- 4, 1-5 Boeing SPEC - BAC5730-1 SHOT PEEN FORMING D 8-4, 6-12 Boeing SPEC - BAC5730-2 SHOT PEENING - SELF CONTAINED D 8-5 Boeing SPEC - BAC5731 RHODIUM PLATING F Boeing SPEC - BAC5732 APPLICATION OF COATINGS AND SEALANTS IN INTEGRAL WATER TANKS A Boeing SPEC - BAC5733 THERMAL INSULATION, MULTILAYER VACUUM, APPLICATION ON CRYOGENIC TANKS D Boeing SPEC - BAC5734 ANODIZING OF MAGNESIUM ALLOYS (DOW 17) H 1-4, 6-27, 6-16, 8-2, 6- 25 Boeing SPEC - BAC5736 APPLICATION OF CHEMICAL AND SOLVENT RESISTANT FINISHES AD 8-6, 6-201, 6-209, 6- 196, 1-14, 1-15, 1-11, 1- 10, 1-12, 1-13 Boeing SPEC - BAC5742 SURFACE TREATMENTS OF MAGNESIUM D Boeing SPEC - BAC5744 MANUAL CLEANING (COLD ALKALINE, SOLVENT EMULSION AND FOAM CLEANERS) K Boeing SPEC - BAC5746 NICKEL PLATING (ELECTRODEPOSITED) M 8-3, 9-2, 9-4, 9-3, 9-5, 9- 6, 6-42, 6-43, 6-44, 6- 46 Boeing SPEC - BAC5748 ABRASIVE CLEANING, DEBURRING, AND FINISHING W 1-6, 1-5, 1-7, 8-11, 8-10 Boeing SPEC - BAC5749 ALKALINE CLEANING Y 6-178, 8-18, 6-179, 6- 133 Boeing SPEC - BAC5750 SOLVENT CLEANING V 1-13, 1-14, 1-8, 1-12, 1- 9 Boeing SPEC - BAC5751 CLEANING, DESCALING AND SURFACE PREPARATION OF FERROUS ALLOYS P 6-69, 8-15, 1-4 Boeing SPEC - BAC5753 CLEANING, DESCALING AND SURFACE PREPARATION OF TITANIUM AND TITANIUM ALLOYS AB 1-7, 1-8, 6-189, 6-182, 6-183, 9-73, 8-11, 6- 184, 6-185, 1-10, 1-9, 1- 11, 1-6 Boeing SPEC - BAC5755 APPLICATION OF INTERIOR DECORATIVE FINISHES AJ 1-6, 1-7, 1-8 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5756 APPLICATION OF HEAT-TREAT PROTECTIVE COATINGS K 9-2, 9-4, 6-29 Boeing SPEC - BAC5759 CHEMICAL MILLING OF STEEL, NICKEL AND COBALT ALLOYS E 9-21, 6-15, 6-16, 9-20 Boeing SPEC - BAC5763 EMULSION CLEANING AND AQUEOUS DEGREASING L 6-63, 8-2, 6-47, 6-51, 6- 54, 6-55, 6-59, 8-5, 9- 15, 8-4, 6-65, 6-73, 6- 69, 6-68, 6-71, 8-7, 6- 70 Boeing SPEC - BAC5765 CLEANING AND DEOXIDIZING ALUMINUM ALLOYS AA 6-217, 9-13, 1-10, 1-11, 1-12, 1-13, 1-14, 1-15, 1-9, 1-16, 1-17, 1-8 Boeing SPEC - BAC5768 MANDREL COLDWORKING OF HOLES IN ALUMINUM G 6-40, 6-39, 9-2 Boeing SPEC - BAC5769 CLEANING, DESCALING AND SURFACE PREPARATION OF MAGNESIUM ALLOYS G 8-2, 6-6, 6-8, 6-9 Boeing SPEC - BAC5770 CLEANING, DESCALING AND SURFACE PREPARATION OF COPPER AND COPPER ALLOYS G 9-1, 6-6 Boeing SPEC - BAC5771 STRIPPING INORGANIC FINISHES K Boeing SPEC - BAC5772 CHEMICAL MILLING ALUMINUM ALLOYS Y 6-58, 1-5, 1-6, 1-7 Boeing SPEC - BAC5774 ALKYD PRIMERS, APPLICATION OF J Boeing SPEC - BAC5775 COATINGS, SYNTHETIC ENAMEL L Boeing SPEC - BAC5777 WASH PRIMER, APPLICATION OF G 8-4, 9-2 Boeing SPEC - BAC5781 SEALER PRESERVATIVE FOR WOOD - APPLICATION OF G Boeing SPEC - BAC5786 ETCH CLEANING OF ALUMINUM ALLOYS N 9-5, 9-6, 6-61, 6-64, 6- 68 Boeing SPEC - BAC5793 APPLICATION OF CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS AB 6-107, 6-109, 6-106, 6- 118, 6-121, 6-122, 9-28, 9-26, 9-27, 6-123, 6- 110 Boeing SPEC - BAC5797 COATING SYSTEMS, FOR CORROSION PRONE AREAS, APPLICATION OF G Boeing SPEC - BAC5800 APPLICATION OF METALLIC PIGMENTED PRIMERS K Boeing SPEC - BAC5801 THE APPLICATION OF PRESSURE SENSITIVE TAPE G 6-17, 1-4, 1-5, 1-7 Boeing SPEC - BAC5804 LOW HYDROGEN EMBRITTLEMENT CADMIUM-TITAINIUM ALLOY PLATING AJ 1-8, 1-7, 1-9 Boeing SPEC - BAC5807 APPLICATION OF HIGH TEMPERATURE EPOXY PRIMER P 8-6, 9-30, 9-31 Boeing SPEC - BAC5810 PHOSPHATING M 9-1, 6-22, 6-23, 9-8 Boeing SPEC - BAC5811 APPLICATION OF BONDED SOLID FILM LUBRICANTS W 1-7, 1-8, 1-9, 6-27, 6-34 Boeing SPEC - BAC5821 HARD ANODIZING F Boeing SPEC - BAC5824 APPLICATION OF LOW FRICTION COATINGS H Boeing SPEC - BAC5837 PREPARING EXTERIOR PLASTIC SURFACES FOR PAINT AA 1-8, 1-9, 6-107, 9-19, 9- 17, 8-4 Boeing SPEC - BAC5840 APPLICATION OF HEAT AND CORROSION RESISTANT INORGANIC COATINGS H Boeing SPEC - BAC5842 CHEMICAL MILLING TITANIUM K 6-18, 9-3, 9-10, 9-17, 6- 22, 6-21, 6-19, 6-23 Boeing SPEC - BAC5845 APPLICATION OF POLYURETHANE TOPCOAT V 9-17, 6-64, 6-73, 9-19, 9-18 Boeing SPEC - BAC5849 BRUSH PLATING, ANODIZING AND ELECTROCHEMICAL ETCHING R Boeing SPEC - BAC5850 CONFORMAL COATING OF CIRCUIT-BOARD ASSEMBLIES WITH POLYURETHANE RESIN L 9-5, 9-4 Boeing SPEC - BAC5851 APPLICATION OF THERMAL SPRAY COATINGS H 9-2, 8-7 Boeing SPEC - BAC5853 INSTALLATION OF ELECTRONIC PARTS PRINTED- CICRUIT BOARDS G 9-6, 6-43 Boeing SPEC - BAC5854 LOW HYDROGEN EMBRITTLEMENT STYLUS CADMIUM PLATING M 9-1 Boeing SPEC - BAC5861 APPLICATION OF PHOSPHATE-FLUORIDE COATING TO TITANIUM ALLOYS E 9-8, 9-19, 9-16, 9-24, 8- 10, 9-25, 9-36, 9-37, 6- 13, 6-18 Boeing SPEC - BAC5862 APPLICATION OF RESIST PATTERNS - PRINTED CIRCUIT BOARDS G Boeing SPEC - BAC5868 APPLICATION OF REFERENCE INFORMATION, PART NUMBERS, AND SERIAL NUMBERS ON PRINTED- CIRCUIT BOARDS R 8-2, 9-8, 9-7, 9-9, 9-10 Boeing SPEC - BAC5875 FABRICATION OF ALUMINUM FOR MARKERS, INSTRUMENT PANELS, DRWER FRONT PANELS, AND FABRICATIOIN OF METAL AND PLASTIC APPLIQUES U 1-5 Boeing SPEC - BAC5880 APPLICATION OF POLYURETHANE RAIN EROSION RESISANT COATINGS F 1-7, 1-8, 1-6 Boeing SPEC - BAC5881 APPLICATION OF GOLD COATING TO TITANIUM AND CORROSION RESISTANT ALLOYS M Boeing SPEC - BAC5882 APPLICATION OF URETHANE COMPATIBLE PRIMER R 1-8, 1-7, 1-6, 1-9 Boeing SPEC - BAC5884 ANODIZING OF ALUMINUM ALLOYS E 9-10, 9-14, 9-19 Boeing SPEC - BAC5891 MODIFICATION AND REWORK OF PRINTED-WIRING BOARDS AND ASSEMBLIES T 9-8, 8-1, 9-17, 9-20, 9- 21, 6-29, 9-23 PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BAC5896 APPLICATION OF ALIPHATIC ISOCYANATE POLYURETHANE ENAMEL E 8-5, 9-28, 9-29, 8-6 Boeing SPEC - BAC5904 FURNACE BRAZING WITH HEAT RESISTANT BRAZING ALLOYS D Boeing SPEC - BAC5924-3 CLEANING OF COLOMBIUM ALLOYS C Boeing SPEC - BAC5940 SILVER BRAZING F 8-3 Boeing SPEC - BAC5943 SILVER BRAZING HONEYCOMB SANDWICH STRUCTURE A Boeing SPEC - BAC5946 TEMPER INSPECTION OF ALUMINUM ALLOYS AD Boeing SPEC - BAC5962 QUALIFICATION AND CERTIFICATION OF WELDERS AND WELDING OPERATORS E 6-30, 6-15 Boeing SPEC - BAC5969 ELECTRICAL DISCHARGE MACHINING F 9-3, 8-2 Boeing SPEC - BAC5972 COLD WORKING OF HOLES IN STEEL D Boeing SPEC - BAC5973 SLEEVE COLD WORKING OF HOLES IN ALUMINUM STRUCURE G 6-33, 8-2, 6-28, 9-21, 9- 23, 6-35 Boeing SPEC - BAC5974 FUSION WELDING OF GIRTH JOINTS IN SYSTEMS TUBING V 8-2, 1-3 Boeing SPEC - BAC5975 FUSION WELDING OF METALS R 9-1, 9-7, 1-5 Boeing SPEC - BAC5976 BRAZING OF HEAT RESISTANT HONEYCOMB STRUCTURES D 6-7, 6-2, 6-3, 6-5 Boeing SPEC - BAC5977 RESISTANCE WELDING OF METALS: SPOT, ROLL SPORT AND SEAM U Boeing SPEC - BAC5980 NONDESTRUCTIVE INSPECTION OF COMPOSITE PARTS AND STRUCTURES F 9-4, 8-3, 9-11, 9-13, 8-4 Boeing SPEC - BAC5984 DIAMOND-LIKE CARBON (DLC) COATING FOR WEAR APPLICATION B Boeing SPEC - BAC5986 MASKANT TRIMMING OF FATIGUE CRITICAL HARDWARE B Boeing SPEC - BACB10CF BEARING, BALL, AIRFRAME, SINGLE ROW, TORQUE TUBE, NON-SELF ALIGNING AF Boeing SPEC - BACB10ES BEARING, SPHERICAL, NARROW RING, SELF LUBRICATED LINER, CLAMPED INSTALLATION AA Boeing SPEC - BACB10GB BEARING, SPERICAL, NARROW RING, COPPER- BERYLLIUM BALL P Boeing SPEC - BACB10HA BEARING, SPHERICAL, SLOTTED ENTRY F Boeing SPEC - BACB28AA BUSHIING, FLANGED, PRESS FIT, UNDERSIZE BORE, OVERSIZE FLANGE R Boeing SPEC - BACB28AP BUSHING, FLANGED, UNDERSIZE BORE, NOMINAL AND OVERSIZE OD (FOR CLAMPED INSTALLATION) W Boeing SPEC - BACB28AT BUSHING, FLANGED, UNDERSIZE BORE, NOMINAL AND OVERSIZE OD (FOR UNCLAMPED INSTALLATION) Y Boeing SPEC - BACB28AV BUSHING, OVERSIZE FLANGE, LINED (FOR UNCLAMPED INSTALLATION) P Boeing SPEC - BACB28AX BUSHING, OVERSIZE FLANGE, UNDERSIZE BORE, (FOR CLAMPED INSALLATION) R Boeing SPEC - BACB28AY BUSHING, FLANGED, LINED, (FOR UNCLAMPED INSTALLATION) W Boeing SPEC - BACB28X BUSHING, FLANGED, NOMINAL SIZE BORE AT Boeing SPEC - BACB30MY BOLT, PROTRUDING HEAD, HEX DRIVE, 95 KSI SHEAR, 6AL-4V TITANIUM (NOMINAL AND OVERSIZE) BB Boeing SPEC - BACB30NM BOLT, HEX HEAD, 160 KSI MIN TENSILE, LONG THREAD, 6AL-4V TITANIUM, NONLOCKING AND SELF-LOCKING (NOMINAL AND OVERSIZE) BE Boeing SPEC - BACB30NX BOLT, PROTRUDING HEAD, HEX DRIVE, TENSION, 6AL- 4V TITANIUM (NOMINAL AND OVERSIZE) BJ Boeing SPEC - BACB30NY BOLT, 100 DEG TENSION HEAD, HEX DRIVE, 160 KSI MIN TENSILE, 6AL-4V TITANIUM (NOMINAL AND OVERSIZE) BM Boeing SPEC - BACB30VT BOLT, PROTRUDING HEAD, HEX DRIVE, 95 KSI SHEAR, 6AL-4V TITANIUM, LIGHTWEIGHT (NOMINAL AND OVERSIZE) AR Boeing SPEC - BACB30YK BOLT, PROTRUDING TENSION HEAD, HEX DRIVE, 125 KSI SHEAR, NICKEL ALLOY 718 (NOMINAL AND OVERSIZE) T Boeing SPEC - BACC30BH COLLAR, PRELOAD, TENSION, REDUCED HEX, CRES AC Boeing SPEC - BACC30BL COLLAR, PRELOAD, SHEAR, 7075-T73 ALUMINUM ALLOY (FOR LIGHTWEIGHT HEX DRIVE SHEAR BOLTS) M Boeing SPEC - BACC30CP COLLAR, PRELOAD, TENSION, 1704PH CORROSION RESISTANT STEEL (NOMINAL AND OVERSIZE) L Boeing SPEC - BACD2001 FLANGED HOLES - ROUND, PUNCH PRESS L Boeing SPEC - BACD2003 BEADS, MINOR STIFFENING D Boeing SPEC - BACD2010_CIR_4 CUTOUTS, HOLES FOR MOUNTING, CIRCLES WITH FOUR SLOTS/HOLES/NUBS L Boeing SPEC - BACD2056 HOLE, FLANGED, 45 DEG-STRAIGHT C Boeing SPEC - BACD2074 FASTENER CODES AND SYMBOLS BG Boeing SPEC - BACD2079 HELICAL COIL INSERT HOLE DETAIL E Boeing SPEC - BACD2085 INSERTS AND STUDS, KEY LOCKED, HOLE DETAIL F Boeing SPEC - BACD2097 SURFACE TEXTURE (U.S. CUSTOMARY AND METRIC) AA PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BACF3AB FILLER, FLAT, RECTANGULAR, FIBERGLASS AND COMPOSITE (CFRP) V Boeing SPEC - BACI12AE INSERT, SCREW THREAD, COARSE AND FINE, SCREW- LOCKING, HELICAL COIL, CRES H Boeing SPEC - BACJ40D JUMPER ASSEMBLY, COPPER BONDING, 135 AMPERE AE Boeing SPEC - BACN10HC NUT, BARREL, LIGHTWEIGHT, SELF-LOCKING, HIGH TENSILE, 450 F DEEP CBORE, 220 KSI N Boeing SPEC - BACN10JA NUT, PLATE, SELF-LOCKING, ONE LUG, FLOATING, LOW HEIGHT, 160 KSI, 450 F AND 900 F AJ Boeing SPEC - BACN10JB NUT, PLATE, SELF-LOCKING, TWO LUG, FLOATING, LOW HEIGHT, 160 KSI, 450 F AND 900 F AE Boeing SPEC - BACN10JN NUT, PLATE, SELF-LOCKING TWO LUG, FLOATING, PLAIN BASE, 450 F AND 900 F AE Boeing SPEC - BACN10JR NUT, PLATE, SELF-LOCKING, TWO LUG, PLAIN, FLOATING AND CSK, 450 F AND 900 F AE Boeing SPEC - BACN10JS NUT, PLATE, SELF-LOCKING, FLOATING, COUNTERBORED, ONE OR TWO LUG, 450 F AND 900 F AA Boeing SPEC - BACN10JZ NUT, PLATE, SELF-LOCKING, FLOATING, SELF-SEALING, CAP, 250 F, 350 F AND 450 F AJ Boeing SPEC - BACN10KB NUT, PLATE, SELF-LOCKING, ONE LUG, PLAIN, FLOATING AND COUNTERSUNK, 450 F AND 900 F AA Boeing SPEC - BACN10KE NUT, PLATE, SELF-LOCKING, FLOATING, 450 F AND 900 F AM Boeing SPEC - BACN10YR NUT, SELF-LOCKING, REDUCED HEX, LOW HEIGHT, A286 CRES, 450F AND 900F T Boeing SPEC - BACN10YT NUT, SELF-LOCKING, HEXAGON, COUNTERBORED, CRES Y Boeing SPEC - BACN10YU NUT, SPACER PLATE, TRIANGLE BASE, LIGHT DUTY K Boeing SPEC - BACN11BW NUT, PLATE, SELF-LOCKING, FLOATING, SPRING LOADED, CONTROLED WEIGHT, A 286 NUT ELEMENT D Boeing SPEC - BACN11G NUT, PLATE, SELF-LOCKING, FLOATING, VARIABLE COUNERBORE, CRES, REPLACEABLE NUT, ON LUG, TWO LUG, CORNER, 450 F AND 900 F V Boeing SPEC - BACN11U NUT, JAM, DRILLED AND UNDRILLED, STANDARD AND THIN HEIGHT, A286 D Boeing SPEC - BACR10V RETAINER, BARREL NUT AC Boeing SPEC - BACR15BA RIVET, 100 DEG PRECISION HEAD, CLOSE TOLERANCE SHANK BB Boeing SPEC - BACR15BB RIVET, UNIVERSAL HEAD, CLOSE TOELRANCE SHANK BB Boeing SPEC - BACR15CE RIVET, 100 DEG SHEAR HEAD BH Boeing SPEC - BACR15DR RIVET, BLIND, NONSTRUCTURAL (PULL THRU TYPE) AJ Boeing SPEC - BACS12HN SCREW, HEX HEAD WITH CROSS RECESS, A286 CRES, 160 KSI L Boeing SPEC - BACS21EE STUD ASSEMBLY, PANEL FASTENER, 1/4 TURN E Boeing SPEC - BACS40R SHIM, LAMINATED, ALUMINUM ALLOY, CRES AND TITANIUM, SURFACE BONDED AM Boeing SPEC - BACS53B STUD, GROUND, ELECTRICAL (35 AMPERE) R Boeing SPEC - BACW10BP WASHER, PLAIN AND COUNTERSUNK, (NOMINAL, .0156 AND .0312 OVERSIZE) ALLOY STEEL AND CRES AJ Boeing SPEC - BACW10EG WASHER, COUNTERSUNK, CRES AND ALUMINUM ALLOY (NOMINAL AND OVERSIZE) D Boeing SPEC - BDS-102 LINE CONVENTIONS AND LETTERING H D-03 Boeing SPEC - BDS-1022 NUMBERING SYSTEM - COMMERCIAL V BCAG-09, BCAG-10, BCAG-11, BCAG-07A, BCAG-06A, BCAG- 04B, BCAG-08A Boeing SPEC - BDS-106 SCREW THREAD REPRESENTATION D Boeing SPEC - BDS-1065 ADVANCED TECHNOLOGY ASSEMBLY DRAWING REQUIREMENTS G BDSG-01 Boeing SPEC - BDS-107 GEAR, SPLINE AND SERRATION DRAWINGS B Boeing SPEC - BDS-1074 NEXT CHANGE ITEM (NCI) F Boeing SPEC - BDS-1090 DRAWING METHODS - UNDIMENSIONED M BDSG-02 Boeing SPEC - BDS-110 DIMENSIONING AND TOLERANCING (ASME Y14.5-2009) B Boeing SPEC - BDS-1110 DRAWING METHODS - PHOTOGRAPHIC E Boeing SPEC - BDS-1170 FUNCTIONAL DIAGRAM DRAWINGS G BCAG-01 Boeing SPEC - BDS-1184 ARTWORK - PREPARATION, REVISION, AND HANDLING D BDSG-01 Boeing SPEC - BDS-1185 WIRE BUNDLE ASSEMBLY ELECTRONIC DATA PROCESSING (EDP) F Boeing SPEC - BDS-1221 MODIFICATION ENGINEERING DRAWINGS H BCAG-04, BCAG-02A Boeing SPEC - BDS-1241 MARKER DRAWINGS W Boeing SPEC - BDS-2023 DRAWING PREPARATION, CHECKING, AND APPROVAL CHECKLISTS E BDSG-01E Boeing SPEC - BDS-203 ASSEMBLY DRAWINGS D Boeing SPEC - BDS-316 PLUMBING DIAGRAMS AND DRAWINGS B Boeing SPEC - BDS-326 PRODUCT DRAWINGS C PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BDS-405 FUNCTIONAL DIAGRAM DRAWINGS C Boeing SPEC - BDS-5020 CATIA DRAWING CONSTRUCTION - GENERAL N Boeing SPEC - BDS-503 NUMBERING SYSTEM E D-05, D-04, D-06 Boeing SPEC - BDS-505 DESIGN ACTIVITY TRANSFER E Boeing SPEC - BDS-610 MODEL BASED DEFINITION - ABBREVIATIONS, ACRONYMS, AND DEFINITIONS G Boeing SPEC - BDS-622 MODEL BASED DEFINITION - CATIA V5 C Boeing SPEC - BMS1-57 BOEING MATERIAL SPECIFICATION QUALIFIED PRODUCTS LIST N Boeing SPEC - BMS10-11 CHEMICAL AND SOLVENT RESISTANT FINISH AE Boeing SPEC - BMS10-123 NON-CHROMATED INTEGRAL FUEL TANK COATING FOR COMPOSITE, TITANIUM AND CRES SURFACES B Boeing SPEC - BMS10-128 SOL-GEL CONVERSION COATING FOR PAINT APPLICATIONS A Boeing SPEC - BMS10-20 CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS T Boeing SPEC - BMS10-26 PLASTIC FILM FOR MARKERS Y Boeing SPEC - BMS10-60 PROTECTIVE TOPCOAT AA Boeing SPEC - BMS10-72 EXTERIOR DECORATIVE PAINT SYSTEM AP Boeing SPEC - BMS10-79 URETHANE COMPATIBLE, CORROSION RESISTANT PRIMER T Boeing SPEC - BMS10-85 ALUMINUM PIGMENTED COATING FOR FASTENERS W Boeing SPEC - BMS13-48 WIRE, ELECTRIC, EXTRUDED CROSS-LINKED ETHYLENETETRAFLUOROETHYLENE, (ETFE) 600 V (RMS) 150 C T Boeing SPEC - BMS13-60 WIRE ELECTRIC, ARC RESISTANT, 600 VOLTS RMS, ANNEALED COPPER, COPPER ALLOY AND ALUMINUM CONDUCTOR T Boeing SPEC - BMS13-71 CABLE, FIBER OPTIC, MULTIMODE, GRADED INDEX F Boeing SPEC - BMS13-78 WIRE, ELECTRIC, HIGH VOLTAGE, ARC RESISTANT, ANNEALED COPPER AND ALUMINUM CONDUCTOR D Boeing SPEC - BMS20-2 GENERAL REQUIREMENTS FOR ALUMINUM ALLOY SHEET AND PLATE C Boeing SPEC - BMS3-33 GREASE, AIRCRAFT, GENERAL PURPOSE C Boeing SPEC - BMS4-20 UNIDIRECTIONAL AND WOVEN GRAPHITE AND GLASS CLOTH FACED ARAMID HONEYCOMB CORE FLOOR PANEL STOCK M Boeing SPEC - BMS5-109 ROOM TEMPERATURE CURING TWO PART EPOXY ADHESIVES D Boeing SPEC - BMS5-114 BOEING MATERIAL SPECIFICATION QUALIFIED PRODUCTS LIST F Boeing SPEC - BMS5-125 COMPOUND, SELF-LEVELING, FOR FLUID DRAINAGE P Boeing SPEC - BMS5-127 ADHESIVE FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS AND CORE SPLICING FOR EXTERIOR PARTS J Boeing SPEC - BMS5-142 LOW DENSITY SEALANT H Boeing SPEC - BMS5-154 ADHESIVE FOR COMPOSITE BONDING (350 F CURE) K Boeing SPEC - BMS5-158 HEAT ACTIVATED FILM ADHESIVES FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS B Boeing SPEC - BMS5-16 TWO PART HOLE FILLING COMPOUND G Boeing SPEC - BMS5-37 COATING COMPOUND ELECTRICAL INSULATING K Boeing SPEC - BMS5-45 FUEL TANK SEALANT N Boeing SPEC - BMS5-63 FIREWALL SEALANT, HYDRAULIC FLUID RESISTANT P Boeing SPEC - BMS5-81 SEALANT, SECONDARY FUEL BARRIER M Boeing SPEC - BMS5-90 FOAMING ADHESIVES W Boeing SPEC - BMS5-92 ADHESIVE, MODIFIED EPOXY FOR GENERAL PURPOSE USE L Boeing SPEC - BMS5-95 PRESSURE AND ENVIRONMENTAL SEALANT- CHROMATE TYPE U Boeing SPEC - BMS7-118 2219 ALUMINUM ALLOY EXTRUSIONS G Boeing SPEC - BMS7-181 TITANIUM TI-6AL-4V ALLOY CASTING J Boeing SPEC - BMS7-186 ALUMINUM ALLOY FORGINGS M Boeing SPEC - BMS7-188 NICKEL-BASE ALLOY, NICKEL ALLOY 625 (UNS N06625), PNEUMATIC DUCTING H Boeing SPEC - BMS7-214 HIGH STRENGTH, STRESS CORROSION RESISTANT ALUMINUM ALLOY FORGINGS U Boeing SPEC - BMS7-240 15-5PH (UNS S15500) SHEET, PLATE, AND STRIP J Boeing SPEC - BMS7-247 TITANIUM 6AI-4V FORGINGS PREMIUM QUALITY J Boeing SPEC - BMS7-26 STEEL BAR, FORGING STOCK FORGINGS, AND TUBING - 4340 MODIFIED R Boeing SPEC - BMS7-260 TITANIUM 10V-2FE-3AI FORGED BLOCK/BAR AND DIE FORGINGS N Boeing SPEC - BMS7-269 TITANIUM ALLOY 6AI-4V FORGINGS, BETA ANNEALED H Boeing SPEC - BMS7-310 TI-6AI-4V HOT ISOSTATIC PRESSED CASTING G Boeing SPEC - BMS7-323 HIGH STRENGTH FATIGUE TOLERANT, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE E Boeing SPEC - BMS7-330 ALUMINUM ALLOY CASTING FOR AIRCRAFT STRUCTURAL APPLICATIONS E PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BMS7-340 NICKEL-BASE ALLOY, NICKEL ALLOY 718 (UNS N07718), PNEUMATIC DUCTING D Boeing SPEC - BMS7-342 SHOT PEENING MEDIA A Boeing SPEC - BMS7-347 PREMIUM GRADE TITANIUM ALLOY SHEET, 6AI-4V J Boeing SPEC - BMS7-360 TITANIUM 5AI-5V-5MO-3CR DIE FORGINGS AND BARS H Boeing SPEC - BMS7-364 12CR-11NI-1.7TI-1MO CORROSION RESISTANT STEEL BAR, WIRE, FORGINGS, AND FORGING STOCK (UNS S46500) A Boeing SPEC - BMS7-373 COPPER NICKEL TIN ALLOY, BARS, RODS, AND TUBES 77CU-15NI-8SN SOLUTION ANNEALED AND SPINODAL HARDENED - (UNS 72900) C Boeing SPEC - BMS7-381 HIGH STRENGTH, DAMAGE TOLERANT, CORROSION RESISTANT 7XXX ALUMINUM ALLOY PLATE D Boeing SPEC - BMS7-396 PREMIUM GRADE TITANIUM 6AL-4V ROLLED BAR AND FORGED BAR. - Boeing SPEC - BMS8-124 BOEING MATERIAL SPECIFICATION QUALIFIED PRODUCTS LIST AE Boeing SPEC - BMS8-132 FIRE RESISTANT EPOXY RESIN PREIMPREGNATED GLASS FABRICS FOR GENERAL PURPOSE USE M Boeing SPEC - BMS8-139 BOEING MATERIAL SPECIFICATION QUALIFIED PRODUCTS LIST N Boeing SPEC - BMS8-151 EPOXY PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANELS AND LAMINATES, AND ELECTRICAL ISOLATION N Boeing SPEC - BMS8-223 CARGO LINER, GLASS REINFORCED, PHENOLIC RIGID, HIGH IMPACT, FIRE RESISTANT U Boeing SPEC - BMS8-246 COATED, TRANSPARENT POLYCARBONATE MATERIALS K Boeing SPEC - BMS8-258 EPOXY IMPREGNATED GRAPHITE WOVEN FABRICS - 275 F (135 C) CURE VACUUM BAG PROCESS C Boeing SPEC - BMS8-264 ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN FOR VACUUM BAG PROCESS N Boeing SPEC - BMS8-276 BOEING MATERIAL SPECIFICATION QUALIFIED PRODUCTS LIST AG Boeing SPEC - BMS8-285 TEXTILE HOOK AND LOOP FASTENERS N Boeing SPEC - BMS8-289 ALUMINUM FOIL/FABRIC PREPREG OR ADHESIVE FILM LAMINATE MATERIAL M Boeing SPEC - BMS8-293 POLYETHERIMIDE BASED THERMOPLASTIC SHEET, INJECTION, EXTRUSION AND ROTOMOLDING F Boeing SPEC - BMS8-300 FLEXIBLE POLYIMIDE FOAM R Boeing SPEC - BMS8-308 PEEL PLY MATERIALS FOR SURFACE PERPARATION OF COMPOSITES K Boeing SPEC - BMS8-331 ADVANCED COMPOSITES - 350 F CURE EPOXY PREIMPREGNATED FIBERGLASS FABRICS M Boeing SPEC - BMS8-336 EXPANDED METAL FOIL FOR LIGHTNING STRIKE PROTECTION OF COMPOSITE PARTS G Boeing SPEC - BMS8-338 MOLDABLE PLASTIC SHIM F Boeing SPEC - BMS8-341 SURFACING FILMS FOR COMPOSITES N Boeing SPEC - BMS8-353 REINFORCED THERMOPLASTIC LAMINATE M Boeing SPEC - BMS8-360 ADVANCED INSULATION COVERING, SELF- EXTINGUISHING A Boeing SPEC - BMS8-377 INSULATION COVERING, FLAME PROPAGATION RESISTANT D Boeing SPEC - BMS9-17 CARBON REINFORCEMENTS, HIGH STRENGTH AND INTERMEDIATE MODULUS FIBERS AND FABRICS J Boeing SPEC - BMS9-3 GLASS FABRIC REINFORCEMENTS FOR LAMINATED PLASTIC PRODUCTS U Boeing SPEC - BPI-206 BOEING FIRST ARTICLE INSPECTION INSTRUCTIONS FOR PURCHASED HARDWARE November 7 Boeing SPEC - BPI-4947 FIRST ARTICLE INSPECTION - PRODUCT November 8 Boeing SPEC - BPS-B-79 BEARINGS, BALL - AIRFRAME, ANTIFRICTION J Boeing SPEC - BPS-P-170 PROCESS CONTROL REQUIREMENTS FOR FASTENERS, BEARINGS AND BUSHINGS AND RELATED PRODUCTS F Boeing SPEC - BSS7002 STORAGE OF TIME AND TEMPERATURE SENSITIVE MATERIALS (TATS) AH 1-131, 1-132, 1-133, 1- 134 Boeing SPEC - BSS7015 DIMENSIONAL CONTROL OF CASTINGS AND FORGINGS - Boeing SPEC - BSS7023 MANUFACTURING FACILITIES WITH APPROVED OPERATING PROCEDURES FOR MANUFACTURING PROCESS CONTROL DOCUMENTS AU Boeing SPEC - BSS7039 LIQUID PENETRANT INSPECTION D 9-6, 8-5, 6-9, 6-4 Boeing SPEC - BSS7048 EDDY CURRENT INSPECTION, DISCONTINUITIES D Boeing SPEC - BSS7055 ULTRASONIC INSPECTION, WROUGHT PRODUCTS B 6-4, 6-5 Boeing SPEC - BSS7062 INSPECTION OF EXTERNAL SWAGING TOOLS G Boeing SPEC - BSS7066 CERTIFICATION OF MISCELLANEOUS ELECTRICAL CRIMP TOOLS H 8-1 Boeing SPEC - BSS7080 SUPPLIER MG'NT REQUIREMENTS FOR DESIGNING AND PROCURING PRINTED-WIRING BOARDS AND PRINTED- WIRING ASSEMBLIES - PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - BSS7083 TORQUE PROCEDURES AND TOOLS FOR FASTENER INSTALLATION E Boeing SPEC - BSS7100 ALTERNATIVES DOCUMENT - PROCESSES, MATERIALS AND PARTS R Boeing SPEC - BSS7122 METHOD FOR DETERMINATION OF REPLACEMENTS FOR CANCELED EXTERNAL STANDARDS APPEARING ON BOEING DRAWINGS/DATASETS/PRODUCT STANDARDS B Boeing SPEC - BSS7156 EARLY PRODUCTION VERIFICATION AND REQUIREMENTS FOR BAC5114 PARTS A Boeing SPEC - BSS7217 AIR CLEANLINESS, SHOP COMPRESSED AIR C Boeing SPEC - BSS7225 ADHESION, TAPE TEST L Boeing SPEC - BSS7350 ROCKWELL HARDNESS TESTING PROCEDURES F Boeing SPEC - BSS7351 EDDY CURRENT ELECTRICAL CONDUCTIVITY - DIRECT READING METHOD G Boeing SPEC - BSS7413 NON-DESTRUCTIVE THICKNESS MEASUREMENT OF NON-CONDUCTIVE COATINGS APPLIED TO FERROUS AND NON-FERROUS METAL ALLOYS A Boeing SPEC - BSS7602 OXYGEN SYSTEMS, PERSONNEL CERTIFICATION FOR Y Boeing SPEC - BSS7604 SEALING OPERATIONS, PERSONNEL CERTIFICATION FOR AK Boeing SPEC - BSS7608 PNEUMATIC TEST OPERATIONS, PERSONNEL CERTIFICATION FOR P Boeing SPEC - BSS7612 ADHESIVE BONDING REPAIR OF STRUCTURAL ALUMINUM PANELS PERSONNEL CERTIFICATION FOR E Boeing SPEC - BSS7613 DOOR OPERATIONS, PERSONNEL CERTIFICATION FOR M 6-4 Boeing SPEC - BSS7617 ELECTRICAL BONDING AND GROUNDING, PERSONNEL CERTIFICATION FOR T 6-6 Boeing SPEC - BSS7621 HYDROGEN DETECTION INSTRUMENT OPERATOR, PERSONNEL CERTIFICATION FOR F Boeing SPEC - BSS7627 AIRPLANE JACKING AND DEJACKING, PERSONNEL CERTIFICATION H Boeing SPEC - BSS7630 SHOT PEENING OPERATIONS, PERSONNEL CERTIFICATION FOR G 8-1, 6-3 Boeing SPEC - BSS7644 ELECTRIC/ELECTRONIC ASSEMBLY, PERSONNEL CERTIFICATION FOR U Boeing SPEC - BSS7653 ASSEMBLY OF ELECTRIC TERMINATIONS, PERSONNEL CERTIFICATION FOR H 8-1, 6-5, 9-1 Boeing SPEC - BSS7655 PHOSPHORIC ACID ANODIZING, PERSONNEL CERTIFICATION FOR H Boeing SPEC - BSS7657 FABRICATION OF ELECTRIC WIRE BUNDLES, PERSONNEL CERTIFICATION FOR M Boeing SPEC - BSS7662 WELDERS AND WELDING OPERATORS, PERSONNEL CERTIFICATION FOR G Boeing SPEC - BSS7669 ASSEMBLY OF COAXIAL CONNECTORS ANAD CONTRACTS, PERSONNEL CERTIFICATION FOR L Boeing SPEC - BSS7675 VISUAL WELD INSPECTORS/EXAMINERS, PERSONNEL CERTIFICATION FOR K 6-3 Boeing SPEC - BSS7679 INSTALLATION OF FIBER OPTIC CABLE HARNESSES, PERSONNEL CERTIFICATION FOR P Boeing SPEC - BSS7685 HANDLING ELECTROSTATIC SENSITIVE DEVICES, PERSONNEL CERTIFICATION FOR M Boeing SPEC - BSS7690 FLARELESS TUBE END ROLLER SWAGE OPERATIONS, PERSONNEL CERTIFICATION FOR A Boeing SPEC - BSS7699 LEAK TESTING, PERSONNEL CERTIFICATION FOR E 6-9 Boeing SPEC - D-13709-4 REQUIREMENTS FOR OBTAINING MATERIAL REVIEW BOARD AUTHORITY BY BOEING SUPPLIERS H Boeing SPEC - D-13709-5 MATERIAL REVIEW REQUIREMENTS FOR BOEING COMMERCIAL AIRPLANES SUPPLIERS WITH DESIGN RESPONSIBILITY E Boeing SPEC - D-18888-1 BOEING PROCESS SPECIFICATIONS NUMERICAL INDEX R Boeing SPEC - D1-8000A QUALITY CONTROL REQUIREMENTS FOR BOEING SUPPLIERS E Boeing SPEC - D1-8007 APPROVAL GUIDE FOR SUPPLIER STATISTICAL SAMPLING PLANS F Boeing SPEC - D2-5000 PROTECTIVE FINISH CODES CK 9-3, 1-1 Boeing SPEC - D210-12056-1 APPLICATION OF MIL-C-46168 ALLIPHATIC POLYURETHANE B Boeing SPEC - D210-12501-1-1 BOEING VERTOL DOCUMENT FOR MATERIAL SUBSTITUTIONS - Boeing SPEC - D210-12534-1 COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT: PROCESS FOR APPLICATION OF A Boeing SPEC - D210-13495-1 V-22 REQUIREMENTS FOR: WET INSTALLATION AND CAP SEALING OF PERMANENT FASTENERS, AND FAY SURFACE SEALING OF ASSEMBLIES B PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - D210-13516-1 FASTENERS, ADHESIVE BONDED, INSTALLATION USING PRESSURE APPLICATION FIXTURE A Boeing SPEC - D3-1453 BOEING DEFENSE & SPACE GROUP PRODUCT SUPPORT DIVISION MILITARY STANDARDS AK Boeing SPEC - D3-274 CERTIFICATION DOCUMENT DJ Boeing SPEC - D3-6002 SHORTAGE MEETING HELD ON NOVEMBER 13, 1996 D Boeing SPEC - D33181-40 TOOL IDENTIFICATION DB Boeing SPEC - D33200-0 BOEING SUPPLIER'S TOOLING DOCUMENT AB Boeing SPEC - D33200-1 BOEING SUPPLIER'S TOOLING AT Boeing SPEC - D33200-2 SELLER-OWNED TOOLING REQUIREMENTS AA Boeing SPEC - D37520-1 SUPPLIERS’ PART PROTECTION GUIDE R Boeing SPEC - D500-11959-1 SUPPLIER INITIATED WITHHOLD TAGS F Boeing SPEC - D500-14822 SUPPLIER INITIATED WITHHOLD TAGS B Boeing SPEC - D500-14823 HOLE DEFINITIONS - PART CONFIGURATION STANDARDIZATION - Boeing SPEC - D581-25629-1 REQUIREMENTS FOR DIE FORGINGS AND PARTS MADE FROM DIE FORGINGS D Boeing SPEC - D6-1276 CONTROL OF MATERIALS AND PROCESSES FOR DESIGNATED PARTS OF BOEING PRODUCTS: FORGED AND MACHINED U Boeing SPEC - D6-15442 SPECIAL MATERIALS TECHNOLOGY UNIT FINISH PROCESSES L Boeing SPEC - D6-17781 CONTROL AND APPROVAL OF DESIGNATED PARTS PRODUCTION J Boeing SPEC - D6-5000 SPECIAL COMMERCIAL AIRPLANE COMPANY FINISH CODES BV Boeing SPEC - D6-51991 BCAG - QUALITY ASSURANCE STANDARDS REFLECTING DIGITAL PRODUCT DEFINITION FOR BOEING SUPPLIERS USING CAD/CAM/CAI/CAE N Boeing SPEC - D6-53993 QUALIFICATION OF SOURCES FOR COMPOSITE PARTS 13 Boeing SPEC - D6-55369 DIMENSIONING AND TOLERANCING SUPPLEMENTAL DOCUMENT - Boeing SPEC - D6-56199 HARDWARE AND SOFTWARE COMPATIBILITY REQUIREMENTS FOR SUPPLIERS USE OF BCAG CATIA NATIVE DATASETS AS AUTHORITY FOR DESIGN, MANUFACTURING AND INSPECTION X Boeing SPEC - D6-56617 CERTIFICATION OF AUTOMATIC ELECTRIC- AND HYDRAULIC- SQUEEZE FASTENING EQUIPMENT H Boeing SPEC - D6-81491 AUTHORITY OF CATIA NATIVE IGES AND PDM STEP DATASETS G Boeing SPEC - D6-82057-1 TOOLING PRODUCTS - Boeing SPEC - D6-82479 BOEING QUALIY MANAGEMENT SYSTEM REQUIREMENTS FOR SUPPLIERS I Boeing SPEC - D650-14831-1 QUALITY ASSURANCE REQUIREMENTS FOR BOEING SUPPPLIERS USING CAD/CAM D Boeing SPEC - D65B90311 BULKHEAD INSTALLATION - TORQUE NACELLE STATION 265.94, OUTBOARD NACELLE STRUT - Boeing SPEC - D8-0776 SUPPLIER CHANGE CONTROL REQUIREMENTS FOR AIRCRAFT COMPONENTS AND SPECIAL/GROUND SUPPORT EQUIPMENT F Boeing SPEC - D8-5000 DEFINITION OF FINISH CODES L Boeing SPEC - D800-10438 REQUIREMENTS FOR PRODUCT ACCEPTANCE TO STATISTICAL TOLERANCE C Boeing SPEC - D800-10438-1 NON-STANDARD INSPECTION OF ATA FEATURES C Boeing SPEC - D800-10564-1 ACCEPTANCE SAMPLING OF ATA HOLE LOCATIONS WITHIN PART FAMILIES - Boeing SPEC - D950-12132-1 PROCESS FOR RETAINING RECORDS OF PROCESS CONTROL DOCUMENTS - Boeing SPEC - DMS 1558 RELEASE APPROVALS R Boeing SPEC - M0000454 ALUMINUM ALLOY BAR, SEE RM PL REPORT FOR COMPLETE DEFINITION D Boeing SPEC - MS33537SUP BOEING SUPPLEMENT TO MS33537 D Boeing SPEC - PS15000.14 HARDENING PH GRADE STAINLESS STEELS TO THE TH CONDITION D Boeing SPEC - PS15720 HARDENING 7075 SHEET AND PLATE UP TO 1.0 INCH TO CONDITION -T6 G Boeing SPEC - REVISION RECORD CARD 40 VOLUME I - Boeing SPEC - STB 5843 MANUFACTURE OF DOUBLE-SIDED PLATED-THROUGH- HOLE CIRCUIT BOARDS K Boeing SPEC - STPB-50074 PROCESS SPECIFICATION FOR SURFACE CLEANING AND PREPARATION PRIOR TO BONDING AND PRIMING B Boeing SPEC - STPB-73030 PROCESS SPECIFICATION FOR FASTENER INSTALLATION AND ACCEPTABILITY LIMITS E Boeing SPEC - SUBJECT INDEX BOEING PROCESS SPECIFICATIONS R Boeing SPEC - TBC-C-10001 COATING, CONFORMAL, PRINTED-WIRING ASSEMBLY R 9-13 Boeing SPEC - TBC-P-10008 PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR E Boeing SPEC - TBC-P-10010 PRINTED-WIRING BOARDS T PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing SPEC - TBC-P-10012 PRINTED-WIRING BOARD FABRICATION K Boeing SPEC - TBC-P-10013 RIGID PRINTED-WIRING ASSEMBLIES GENERAL SPECIFICATION FOR C Boeing SPEC - TBC-P-10014 PRINTED-WIRING BOARD FABRICATION D Boeing - St. Louis SPEC - 1D0151 ANGLE, EXTRUDED - Boeing - St. Louis SPEC - 1D0750 CHANNEL, EXTRUDED - Boeing - St. Louis SPEC - 1D1074 TEE, EXTRUDED - Boeing - St. Louis SPEC - 1D1075 TEE, EXTRUDED - Boeing - St. Louis SPEC - 1D1085 TEE, EXTRUDED - Boeing - St. Louis SPEC - 1D1105 TEE, EXTRUDED - Boeing - St. Louis SPEC - 1D1181 TEE, EXTRUDED - Boeing - St. Louis SPEC - 1D1182 TEE, EXTRUDED - Boeing - St. Louis SPEC - 1D1240 ANGLE, EXTRUDED - Boeing - St. Louis SPEC - 1D1319 I-SHAPE, EXTRUDED - Boeing - St. Louis SPEC - 1D1330 HAT, EXTRUDED - Boeing - St. Louis SPEC - 1D1336 SHAPE, EXTRUDED - Boeing - St. Louis SPEC - 1D1660 HAT, EXTRUDED, SUPPORT - Boeing - St. Louis SPEC - 1D1815 ZEE, EXTRUDED - Boeing - St. Louis SPEC - 1M2447 SHAPE, EXTRUDED B Boeing - St. Louis SPEC - 1MA160 ALUMINUM ALLOY T-SECTION-EXTRUDED AL Boeing - St. Louis SPEC - 1MA240 ALUMINUM ALLOY RECTANGULAR BAR - EXTRUDED D Boeing - St. Louis SPEC - 3D0001 NUT ASSY, SELF-LOCKING, GANG CHANNEL - STR, ALLOY, REPLACEABLE E Boeing - St. Louis SPEC - 3D0003 NUT ASSY, SELF-LKG, GANG CHANNEL - STR, REPLACEABLE, CBORE, 800 F B Boeing - St. Louis SPEC - 3D0041 RECEPTABLE, TURNLOCK FASTENER D Boeing - St. Louis SPEC - 3M1246 PIN, RIVET, FLUTED THREADS - SHEAR, 100 C'SUNK, HEX POINT DRIVE L Boeing - St. Louis SPEC - 3M1249 COLLAR, LOBULAR - PIN, RIVET, THREADED, SHEAR, ALUMINUM, TITANIUM, CRES, (NOMINAL AND 0.0156 OVERSIZE) E Boeing - St. Louis SPEC - 40M114 DRAWING INTERPRETATION DOCUMENT K Boeing - St. Louis SPEC - 6D0045 PANEL CUTOUT, ELECTRICAL RECEPTACLE, FIREWALL C Boeing - St. Louis SPEC - 6D0046 PANEL CUTOUT, ELECTRICAL RECEPTACLE, GENERAL - USAGE A Boeing - St. Louis SPEC - 6M39 STANDARD BEND RADII AA Boeing - St. Louis SPEC - 6M51 STANDARD JOGGLES U Boeing - St. Louis SPEC - 9D0057 INSERT, PANEL FASTENER - PLUG, GROMMET, THRU HOLE - Boeing - St. Louis SPEC - 9D0090 TRACK, TERMINAL - MODULE BLOCK D Boeing - St. Louis SPEC - 9D0119 INSERT, PANEL FASTENER - SLEEVE, GROMMET, THRU HOLE - Boeing - St. Louis SPEC - DMS1570 MULTI-DMS AMENDMENT - Boeing - St. Louis SPEC - DPS 1.37 ELECTRICAL BONDING CONNECTIONS - MILITARY AE Boeing - St. Louis SPEC - DPS 11.05 SULFURIC ACID ANODIZING T Boeing - St. Louis SPEC - DPS 11.05-2 SULFURIC ACID ANODIZING - THIN FILM F Boeing - St. Louis SPEC - DPS 3.320 PROTECTION OF SHEET METAL AND SKINS AB Boeing - St. Louis SPEC - DPS 3.69-4 FORMING OF 7000 SERIES ALUMINUM ALLOYS AP Boeing - St. Louis SPEC - DPS 4.50-62 IMPACT RESISTANT COATING SYSTEM AP Boeing - St. Louis SPEC - DPS 4.706 INSPECTION REQUIREMENTS FOR CASTINGS M Boeing - St. Louis SPEC - DPS 4.707 PENETRANT INSPECTION (FLUORESCENT) BC Boeing - St. Louis SPEC - DPS 4.710 MINIMUM FABRICATION PRACTICES FOR METALS M Boeing - St. Louis SPEC - DPS 4.710-1 EDGE CONDITION REQUIREMENTS K Boeing - St. Louis SPEC - DPS 4.710-2 SHEET METAL FABRICATION PRACTICES L Boeing - St. Louis SPEC - DPS 4.710-3 GENERAL FABRICATION PRACTICES - COMMERCIAL AK Boeing - St. Louis SPEC - DPS 4.725 DIMENSIONAL INSPECTION OF FORGINGS AND CASTINGS D Boeing - St. Louis SPEC - DPS 9.34 SULFURIC ACID - SODIUM DICHROMATE ETCH R Boeing - St. Louis SPEC - DPS 9.45 CONVERSION COATINGS FOR ALUMINUM AW Boeing - St. Louis SPEC - DPS 9.98 DETONATION GUN DEPOSITED COATINGS C Boeing - St. Louis SPEC - DPS 9.99 HIGH VELOCITY OXYFUEL (HVOF) DEPOSITED COATINGS B Boeing - St. Louis SPEC - DPS CROSS REFERENCE NUMERICAL INDEX N Boeing - St. Louis SPEC - F-516 FINISH SPECIFICATION ADVANCED CONCEPT EJECTION SEAT A Boeing - St. Louis SPEC - K36S0008 FASTENER, PANEL A Boeing - St. Louis SPEC - K48B0009 HANDLE, BOW - INTERNALLY THREADED L Boeing - St. Louis SPEC - K52H0073 HOUSING, ELECTRICAL EQUIPMENT - RECTANGULAR AH Boeing - St. Louis SPEC - K91F0009 SPACER, SLEEVE - SHOULDERED, ALUMINUM G Boeing - St. Louis SPEC - MCS6000 CONSUMABLE MATERIAL SPECIFICATION FOR HAND AND IMMERSION CLEANING L Boeing - St. Louis SPEC - MDC 91B0296 NON DESTRUCTIVE TESTING PROGRAM PLAN D Boeing - St. Louis SPEC - MDC 91B0315 FATIGUE & FRACTURE CONTROL PLAN A Boeing - St. Louis SPEC - MDC 91B0432 MATERIALS & PROCESS REQUIREMENTS A Boeing - St. Louis SPEC - MDCA0436 QUALITY ASSURANCE REQUIREMENTS FOR SELLERS OF BOEING DESIGNED ETAIL PARTS AND NON- FUNCTIONAL MINOR ASSEMBLIES P Boeing - St. Louis SPEC - PS INDEX PROCESS SPECIFICATION INDEX - PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing - St. Louis SPEC - PS10000 MATERIAL AND PROCESS SPECIFICATION CONTROL DOCUMENT AB Boeing - St. Louis SPEC - PS11002 NAMEPLATES, ADHESIVE BONDED IN PLACE, APPLICATION OF T Boeing - St. Louis SPEC - PS11007 CEMENTING OF NYLON N Boeing - St. Louis SPEC - PS11205 SEAL, DOOR, FORM-IN-PLACE, FABRICATION OF AY Boeing - St. Louis SPEC - PS11217 SEALING METHODS, AIRCRAFT BB Boeing - St. Louis SPEC - PS11242 TOLERANCE REQUIREMENTS FOR BOND DETAILS D Boeing - St. Louis SPEC - PS11344 SEALING METHODS Y Boeing - St. Louis SPEC - PS12010 CLEANING, SOLVENT, HAND OR IMMERSION U Boeing - St. Louis SPEC - PS12015 EMULSION CLEANING D Boeing - St. Louis SPEC - PS12020 CLEANING, SOLVENT VAPOR DEGREASING AA Boeing - St. Louis SPEC - PS12024 CLEANING, AQUEOUS IMMERSION DEGREASING G Boeing - St. Louis SPEC - PS12030 CLEANING, ALKALINE AA Boeing - St. Louis SPEC - PS12040 CLEANING, ABRASIVE AE Boeing - St. Louis SPEC - PS12050 PICKLING W Boeing - St. Louis SPEC - PS12100 STRIPPING ORGANIC COATINGS; BRUSH OR SPRAY APPLICATION N Boeing - St. Louis SPEC - PS12105 STRIPPING ORGANIC COATINGS BY IMMERSION H Boeing - St. Louis SPEC - PS13101 PLATING, CADMIUM ELECTRO V Boeing - St. Louis SPEC - PS13143 ALUMINUM, ION VAPOR DEPOSITION (IVD) OF U Boeing - St. Louis SPEC - PS13155 COATING, PROTECTION OF STEEL AND TITANIUM DURING HEAT TREATMENT AND FORMING G Boeing - St. Louis SPEC - PS13201 ANODIZING, ALUMINUM ALLOYS AL Boeing - St. Louis SPEC - PS13202 COATING, COLORLESS CHEMICAL SURFACE TRATMENT OF ALUMINUM ALLOYS BY THE IMMERSION PROCESS R Boeing - St. Louis SPEC - PS13204 CONVERSION COATING, BRUSH AND SPRAY AM Boeing - St. Louis SPEC - PS13208 HARDCOATING OF ALUMINUM ALLOYS U Boeing - St. Louis SPEC - PS13209 COATING, MULTICOLORED CHEMICAL CONVERSION OF ALUMINUM ALLOYS BY THE IMMERSION PROCESS W Boeing - St. Louis SPEC - PS13300 GENERAL PAINTING METHODS AND TECHNIQUES R Boeing - St. Louis SPEC - PS13318 PAINTING OF AEROSPACE GROUND EQUIPMENT (AGE) P Boeing - St. Louis SPEC - PS13336 PREPARATION AND APPLICATION OF SILK SCREEN ENAMEL J Boeing - St. Louis SPEC - PS13347 PREPARATION AND APPLICATION OF MIL-DTL-15090 LIGHT GRAY EQUIPMENT ENAMEL (FORMULA NO. 111) C Boeing - St. Louis SPEC - PS13350.1 COATING SYSTEM, EPOXY (FR), APPLICATION OF, FOR DOUGLAS COMMERCIAL AND C-17 AIRCRAFT AF Boeing - St. Louis SPEC - PS13375 APPLICATION OF EPOXY PRIMER AD Boeing - St. Louis SPEC - PS13525 POLYURETHANE CORROSION RESISTANT COATING, SPRAY APPLICATION OF AB Boeing - St. Louis SPEC - PS13550.1 COATING SYSTEM, EPOXY (FR), APPLICATION OF, FOR DOUGLAS COMMERCIAL AND C-17 AIRCRAFT AF Boeing - St. Louis SPEC - PS13553 IMPACT RESISTANT COATING SYSTEM AH Boeing - St. Louis SPEC - PS13560 HEAT RESISTANT URETHANE COATING (DOUGLAS COMMERCIAL AND C-17 AIRCRAFT) G Boeing - St. Louis SPEC - PS13630 PAINTING OF F/A-18 AND AV-8 AIRCRAFT AF Boeing - St. Louis SPEC - PS13630.1 PAINTING AT DETAIL AND ASSEMBLY LEVEL AD Boeing - St. Louis SPEC - PS13630.3 REWORK OF PAINTED SURFACES J Boeing - St. Louis SPEC - PS13646 PAINTING OF F-15 AIRCRAFT AH Boeing - St. Louis SPEC - PS13646.1 FINISHES FOR MISSILES AND ASSOCIATED EQUIPMENT U Boeing - St. Louis SPEC - PS14007 FORMING ALUMINUM ALLOY WROUGHT PRODUCTS AB Boeing - St. Louis SPEC - PS14016 PANELS, ILLUMINATED, PLASTIC AS7788: ACCEPTANCE, INSPECTION, AND TESTING OF L Boeing - St. Louis SPEC - PS14017 FORMING OF TITANIUM ALLOYS V Boeing - St. Louis SPEC - PS14034 LAMINATES, REINFORCED PLASTIC, FABRICATION OF AC Boeing - St. Louis SPEC - PS14034.4 LAMINATES, GLASS REINFORCED PHENOLIC, FABRICATION OF (DOUGLAS COMMERCIAL, C-17, AND T- 45 AIRCRAFT) E Boeing - St. Louis SPEC - PS14098 FABRICATING TITANIUM AND TIANIUM ALLOYS (DPS 4.801) K Boeing - St. Louis SPEC - PS14131 HOT JOGGLING ALUMINUM ALLOYS (DOUGLAS AIRCRAFT) E Boeing - St. Louis SPEC - PS14133 PHENOLIC PLASTICS; MACHINING OF (DOUBLAS AIRCRAFT) A Boeing - St. Louis SPEC - PS14190 NAMEPLATES AND MARKERS, PLASTIC FILM, FABRICATION OF K Boeing - St. Louis SPEC - PS15000 GENERAL HEAT TREATING CRITERIA FOR FERROUS MATERIALS V Boeing - St. Louis SPEC - PS15238 CANCELLATION AND SUPERSEDENCE NOTICE FOR P.S. 15238 (REV A) A Boeing - St. Louis SPEC - PS15500 GENERAL HEAT TREATING CRITERIA FOR ALUMINUM ALLOYS V PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing - St. Louis SPEC - PS15500.4 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T6/- T62 AND T72 CONDITIONS A Boeing - St. Louis SPEC - PS15500.6 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T76 AND -T5 CONDITIONS C Boeing - St. Louis SPEC - PS15520 HARDENING OF 7075 SHEET, CLAD SHEET AND PLATE UP TO 1.0 INCH IN THICKNESS TO CONDITION-T6(2) E Boeing - St. Louis SPEC - PS15534 CANCELLATION AND SUPERSEDENCE NOTICE FOR P.S. 15534 (REV D) D Boeing - St. Louis SPEC - PS15701 GENERAL HEAT TREATING CRITERIA FOR ALUMINUM ALLOYS (DOUGLAS COMMERCIAL AND C-17 AIRCRAFT) N Boeing - St. Louis SPEC - PS15709 HARDENING 7075 SHEET AND PLATE TO THE -T76 TEMPER F Boeing - St. Louis SPEC - PS15800 GENERAL HEAT TREATING CRITERIA FOR TITANIUM ALLOYS F Boeing - St. Louis SPEC - PS15806 ANNEALING PROCEDURE - TITANIUM ALLOYS D Boeing - St. Louis SPEC - PS15807 STRESS RELIEF PROCEDURE - TITANIUM ALLOYS L Boeing - St. Louis SPEC - PS16001 MARKING OF FABRICATED PARTS CE Boeing - St. Louis SPEC - PS16001-1 ELECTROETCH MARKING OF METAL PARTS AND ASSEMBLIES L Boeing - St. Louis SPEC - PS16001.2 MARKING OF FLUID LINES AF Boeing - St. Louis SPEC - PS16002 MARKING OF IDENTIFICATION/MODIFICATION PLATES AND MISCELLANEOUS SERIALIZATION AM Boeing - St. Louis SPEC - PS16010 IDENTIFICATION OF PARTS AND ASSEMBLIES (DOUGLAS COMMERCIAL AND C-17 AIRCRAFT) T Boeing - St. Louis SPEC - PS16010.1 FLUID LINES; IDENTIFICATION OF DPS3.22-17 K Boeing - St. Louis SPEC - PS16010.2 IDENTIFICATION OF MD-11 STATION NUMBERS B Boeing - St. Louis SPEC - PS16011 MARKING METHODS AND MATERIALS (DPS 3.27, -1, -2,- 3, -4, -5, -7) T Boeing - St. Louis SPEC - PS16100 IDENTIFICATION OF MATERIALS AND PARTS FOR DIMPLING J Boeing - St. Louis SPEC - PS17034 BUSHINGS, INSTALLATION OF L Boeing - St. Louis SPEC - PS17169 BONDING AND GROUNDING; ELECTRICAL AP Boeing - St. Louis SPEC - PS17600 BUSHINGS AND BEARINGS; INSTALLATION AND STAKING OF (DPS1.33-17) P Boeing - St. Louis SPEC - PS19000 INSTALLATION OF FASTENERS Y Boeing - St. Louis SPEC - PS19151 FASTENERS, EDDIE-BOLT 2; INSTALLATION OF L Boeing - St. Louis SPEC - PS19200 FASTENERS, BOLTS AND SCREWS; INSTALLAITON OF BC Boeing - St. Louis SPEC - PS19216 CLINCH AND STAKE NUTS, INSTALLATION OF B Boeing - St. Louis SPEC - PS19260 INSERTS, HELICAL COIL; INSTALLATION OF J Boeing - St. Louis SPEC - PS19402 HOLE PERPARATION - FEEDS AND SPEEDS AN Boeing - St. Louis SPEC - PS20001 PROTECTION OF PARTS DURING FABRICATION AND TEMPORARY STORAGE V Boeing - St. Louis SPEC - PS20003 CANCELLATION AND SUPERSEDENCE NOTICE FOR P.S. 20003 (REV V) V Boeing - St. Louis SPEC - PS20003.3 CANCELLATION AND SUPERSEDENCE NOTICE FOR P.S. 20003.3 (REV AW) AW Boeing - St. Louis SPEC - PS20004 REWORK OF SCRATCHED, ABRADED OR CORRODED SURFACES J Boeing - St. Louis SPEC - PS20006 SHEET METAL AND EXTRUSIONS, REQUIREMENTS AND ACCEPTANCE CRITERIA FOR PARTS FABRICATED FROM T Boeing - St. Louis SPEC - PS20009 METALLIC MATERIALS AND PARTS; STRAIGHTENING OF J Boeing - St. Louis SPEC - PS20018 SURFACE FINISH REQUIREMENTS FOR ROUND HOLES F Boeing - St. Louis SPEC - PS20022 CHEMICAL MILLING P Boeing - St. Louis SPEC - PS20024 DEBURRING, BLENDING, AND SANDING OF METAL PARTS R Boeing - St. Louis SPEC - PS20701 FABRICATION PRACTICES FOR METALS: MINIMUM (DOUGLAS AIRCRAFT) C Boeing - St. Louis SPEC - PS20701.1 EDGE CONDITION REQUIREMENTS (DPS 4.710-1) H Boeing - St. Louis SPEC - PS20701.3 FABRICATION PRACTICES: GENERAL (DOUGLAS COMMERCIAL AND C-17 AIRCRAFT) N Boeing - St. Louis SPEC - PS20722 HOLE MASKING FOR ENHANCED PROCESS CONTROLLED METALLIC PARTS D Boeing - St. Louis SPEC - PS20722QPL ADDENDUM TO HOLE MASKING FOR ENHANCED PROCESS CONTROLLED METALLIC PARTS E Boeing - St. Louis SPEC - PS21201 MAGNETIC PARTICLE INSPECTION AC Boeing - St. Louis SPEC - PS21202 PENETRANT INSPECTION AT Boeing - St. Louis SPEC - PS21203 HARDNESS TESTING OF PARTS AND MATERIALS J Boeing - St. Louis SPEC - PS21207 EDDY URRENT DETERMINATION OF ELECTRICAL CONDUCTIVITY FOR ALUMINUM ALLOYS G Boeing - St. Louis SPEC - PS21211 ULTRASONIC INSPECTION OF WROUGHT METALS L Boeing - St. Louis SPEC - PS21212 HARDNESS INSPECTION OF METALS (DPS 1.05, -1, -2, - 7) F Boeing - St. Louis SPEC - PS21313 COATING ADHESION TESTS L PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing - St. Louis SPEC - PS23001 ACCEPTANCE PROCEDURE FOR AIRFRAME CASTINGS U Boeing - St. Louis SPEC - PS23023 HARDNESS AND ELECTRICAL CONDUCTIVITY INSPECTION ACCEPTANCE CRITERIA FOR METALS U Boeing - St. Louis SPEC - PS23038 AUTHORITY FOR MATERIAL SUBSTITUTION M Boeing - St. Louis SPEC - PS23038.3 AUTHORITY FOR MATERIAL SUBSTITUTIONS: F-18 AIRCRAFT C Boeing - St. Louis SPEC - PS23041 MACHINED PARTS, REQUIREMENTS AND ACCEPTANCE CRITERIA FOR V Boeing - St. Louis SPEC - PS23044 SURFACE ROUGHNESS CONTROL (DOUGLAS AIRCRAFT) F Boeing - St. Louis SPEC - PS23054 FIRST ARTICLE ENGINEERING EXAMINATION (FAEE) B Boeing - St. Louis SPEC - PS23600 AGE/SHELF LIFE CONTROL REQUIREMENTS BA Boeing - St. Louis SPEC - PS362 FINISH SPECIFICATION FOR CH-47, H-46, AND 107II MODEL HELICOPTERS N Boeing - St. Louis SPEC - S00095 TEE, EXTRUDED A Boeing - St. Louis SPEC - S1086301 HOLE-STANDARD LIGHTENING K Boeing - St. Louis SPEC - S1159966 METHODS-BEND RELIEF E Boeing - St. Louis SPEC - S1242520 ANGLE-1.25X1X.125 EXTRUDED A Boeing - St. Louis SPEC - S1292000 METHOD - STANDARD JOGGLE, LONG TRANSITION E Boeing - St. Louis SPEC - S1415741 ANGLE, EXTRUDED A Boeing - St. Louis SPEC - S1419318 TEE, EXTRUDED A Boeing - St. Louis SPEC - S1440004 TEE, EXTRUDED A Boeing - St. Louis SPEC - S1666744 TEE - 2.625" X 2.250" EXTRUDED A Boeing - St. Louis SPEC - S1706317 TEE - EXTRUDED, 3X3.25 B Boeing - St. Louis SPEC - S2431215 BUSHING, SLEEVE - FLANGED, UNDERSIZE ID, REAMABLE N Boeing - St. Louis SPEC - S2448967 METHOD - SPOTFACE, CER & CBORE CONTROL FOR TUBE FITTING BOSS A Boeing - St. Louis SPEC - S2645505 TEE - EXTRUDED B Boeing - St. Louis SPEC - S2933110 TEE - EXTRUDED A Boeing - St. Louis SPEC - S2933241 ANGLE - EXTRUDED A Boeing - St. Louis SPEC - S2933837 ANGLE - EXTRUDED - Boeing - St. Louis SPEC - S326-00004 STANDARD PART SUBSTITUTIONS N Boeing - St. Louis SPEC - S326-00005 T-X PROGRAM MATERIAL AND PROCESS SUBSTITUTIONS AC Boeing - St. Louis SPEC - S326-00049 APT PROGRAM SHIM AND FIT SPECIFICATION B Boeing - St. Louis SPEC - S326-00112 APTS PROGRAM AIR VEHICLE CONTROL OF FRACTURE CRITICAL TRACEABLE, FRACTURE CRITICAL AND DURABILITY CRITICAL PARTS A Boeing - St. Louis SPEC - S326-00113 APTS PROGRAM AIR VEHICLE SERIALIZATION AND TRACEABILITY REQUIREMENTS FOR FRACTURE CRITICAL TRACEABILE PARTS A Boeing - St. Louis SPEC - S326-00128 PRECISION ASSEMBLY HOLE DIAMETERS AND TOLERANCES A Boeing - St. Louis SPEC - S326-00130 T-7A PROGRAM FASTENER HOLE REWORK SPECIFICATION B Boeing - St. Louis SPEC - S4754765 HINGE 7075 A Boeing - St. Louis SPEC - S4922798 BUSHING, SLEEVE - PRESS FIT, UNDERSIZE ID, REAMABLE G Boeing - St. Louis SPEC - S4928911 BUSHING, SLEEVE - PRESS FIT, FLANGED, REAMABLE H Boeing - St. Louis SPEC - S4928913 BOLT, SHEAR - CLOSE TOLERANCE, HEX HD, ALLOY STEEL G Boeing - St. Louis SPEC - S4931028 TEE - EXTRUDED B Boeing - St. Louis SPEC - S4931552 METHOD - RETURN LIP LIGHTENING HOLE A Boeing - St. Louis SPEC - S4932041 TEE - EXTRUDED B Boeing - St. Louis SPEC - S4932154 SHAPE - EXTRUDED A Boeing - St. Louis SPEC - S4933678 TEE - EXTRUDED A Boeing - St. Louis SPEC - S5076260 METHOD - RIVET AND SCREW HOLE PREPARATION BF Boeing - St. Louis SPEC - S7932262 METHOD - HOLE PREPARATION, RIVNUT FASTENERS - Boeing - St. Louis SPEC - SPS01100 BONDING WITH ONE COMPONENT ROOM TEMPERATURE VULCANIZING SILICONE ADHESIVES - Boeing - St. Louis SPEC - SPS02206 ETCHING ALUMINUM ALLOYS B Boeing - St. Louis SPEC - SPS03061 PREPARATION AND APPLICATION OF ALIPHATIC POLYURETHANE ENAMEL A Boeing - St. Louis SPEC - SPS03523 CHEMICAL CONVERSION COATING (COLORLESS) OF ALUMINUM ALLOYS B Boeing - St. Louis SPEC - SPS04250 GENERAL REQUIREMENTS FOR SWAGING HARDWARE - Boeing - St. Louis SPEC - SPS04300 RIVETING, DIMPLING AND COUNTERSINKING - Boeing - St. Louis SPEC - SPS04305 FABRICATION REQUIREMENTS SHEET METAL PARTS AND EXTRUSIONS - Boeing - St. Louis SPEC - SPS04306 STANDARD MACHINING TOLERANCE AND ALLOWANCES B Boeing - St. Louis SPEC - SPS06910 HANDLING AND INSTALLATION OF HEAT SHRINKABLE SLEEVING - Boeing - St. Louis SPEC - ST3M719 NUT, SELF-LOCKING, PLATE - TWO LUG, FLOATING VARIABLE C'BORE, DRY FILM, CRES, EXTENDED REUSEABILITY R PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing - St. Louis SPEC - ST3M720 NUT, SELF-LOCKING, PLATE - ONE LUG VARIABLE C'BORE, DRY FILM, CRES, EXTENDED REUSEABILITY J Boeing - St. Louis SPEC - ST4M130 BUSHING, SLEEVE - FLANGED, SPECIAL BD Boeing - St. Louis SPEC - ST4M144 BUSHING - SLEEVE, CLAMP UP, COPPER BASE ALLOYS, SPECIAL U Boeing - St. Louis SPEC - ST7M389 SLEEVE, SEAL, COUPLER D Boeing - St. Louis SPEC - STF1001 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1003 FINISH INSTRUCTION H Boeing - St. Louis SPEC - STF1004 FINISH INSTRUCTION H Boeing - St. Louis SPEC - STF1006 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1007 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1009 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1010 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1013 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1014 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1015 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1016 FINISH INSTRUCTION - Boeing - St. Louis SPEC - STF1017 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1018 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1025 FINISH INSTRUCTION F Boeing - St. Louis SPEC - STF1026 FINISH INSTRUCTION G Boeing - St. Louis SPEC - STF1032 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1036 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1037 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1038 FINISH INSTRUCTION G Boeing - St. Louis SPEC - STF1039 FINISH INSTRUCTION F Boeing - St. Louis SPEC - STF1040 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1043 FINISH INSTRUCTION A Boeing - St. Louis SPEC - STF1048 FINISH INSTRUCTION A Boeing - St. Louis SPEC - STF1051 FINISH INSTRUCTION A Boeing - St. Louis SPEC - STF1052 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1054 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1055 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1056 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1058 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1059 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1061 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1062 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1063 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1064 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1066 FINISH INSTRUCTION A Boeing - St. Louis SPEC - STF1101 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1103 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1105 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1106 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1107 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1111 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1112 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1113 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1117 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1118 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1121 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1123 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1143 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1146 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1147 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1157 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1161 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1162 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1163 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1164 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1165 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1166 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1167 FINISH INSTRUCTION - Boeing - St. Louis SPEC - STF1168 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1169 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1172 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1173 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1174 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1177 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1178 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1179 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1182 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1201 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1205 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1207 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1211 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1217 FINISH INSTRUCTION - Boeing - St. Louis SPEC - STF1218 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1219 FINISH INSTRUCTION C PF-0073 REV: L 6/30/2023 Customer Specification Revision Levels Perfekta Inc. 480 E. 21st St. N. Wichita, Ks. 67214 Boeing - St. Louis SPEC - STF1220 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1221 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1222 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1225 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1301 FINISH INSTRUCTION F Boeing - St. Louis SPEC - STF1302 FINISH INSTRUCTION F Boeing - St. Louis SPEC - STF1304 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1306 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1307 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1309 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1310 FINISH INSTRUCTION A Boeing - St. Louis SPEC - STF1311 FINISH INSTRUCTION A Boeing - St. Louis SPEC - STF1401 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1402 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1403 FINISH INSTRUCTION A Boeing - St. Louis SPEC - STF1502 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1503 FINISH INSTRUCTION G Boeing - St. Louis SPEC - STF1504 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1511 FINISH INSTRUCTION F Boeing - St. Louis SPEC - STF1514 FINISH INSTRUCTION - Boeing - St. Louis SPEC - STF1601 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1614 FINISH INSTRUCTION H Boeing - St. Louis SPEC - STF1617 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1619 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1629 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1701 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1702 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1703 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1704 FINISH INSTRUCTION D Boeing - St. Louis SPEC - STF1706 FINISH INSTRUCTION K Boeing - St. Louis SPEC - STF1709 FINISH INSTRUCTION H Boeing - St. Louis SPEC - STF1710 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1711 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1714 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1718 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1719 FINISH INSTRUCTION B Boeing - St. Louis SPEC - STF1720 FINISH INSTRUCTION C Boeing - St. Louis SPEC - STF1721 FINISH INSTRUCTION E Boeing - St. Louis SPEC - STF1724 FINISH INSTRUCTION G Boeing - St. Louis SPEC - STF1726 FINISH INSTRUCTION C Boeing - St. Loui
What's in the CESSNA A185E TCDS
A Type Certificate Data Sheet (TCDS) is the FAA's record of what an aircraft type was approved as. It is the source of truth for weights, seating, fuel and the rules the design was certified against. Expand any line to see what it means.
664 CESSNA A185E parts for sale
See all →
Parts listed for sale by vetted eBay sellers — confirmed on eBay at checkout.