ECLIPSE EA500 — Service Bulletins
5 service bulletins references for the ECLIPSE EA500.
Overview
ECLIPSE Service Bulletin · 2016
This document is a Service Bulletin for the Eclipse EA500 aircraft, specifically addressing the inspection of the wire harness between the inboard flap actuator and the external position sensor for overbraid installation. It outlines the compliance requirements, inspection procedures, and necessary actions if the overbraid is not installed.
- Mandatory inspection for aircraft serial numbers 000001 to 000239.
- Focus on the wire harness between the inboard flap actuator and external position sensor.
- Inspection must be performed at the next 300 hr / 24 month inspection.
- If overbraid is missing, installation is required.
- Estimated labor hours for inspection: 0.5 hours; for installation: 16 hours.
- No weight and balance change expected.
- No electrical load data change.
- Document based on FAA-approved engineering data.
5 documents
- ReadECLIPSE Service Bulletin20161.1 MB · via eclipse.aero
- ReadECLIPSE Service Bulletin201659 KB · via eclipse.aero
- ReadSB 500-25-009, REV B2011769 KB · via eclipse.aero
- ReadSERVICE BULLETIN NUMBER: SB 500-34-019, REV C2008662 KB · via eclipse.aero
- ReadSERVICE BULLETIN SB 500-34-0052007973 KB · via eclipse.aero
ECLIPSE EA500 — Service Bulletins FAQ
How many Service Bulletins documents does Sprinkle have for the ECLIPSE EA500?
Sprinkle has 5 Service Bulletins documents on file for the ECLIPSE EA500.
What year is the ECLIPSE EA500 Service Bulletins?
The ECLIPSE EA500 Service Bulletins on file is dated 2016.
Where does Sprinkle's ECLIPSE EA500 Service Bulletins come from?
This ECLIPSE EA500 Service Bulletins was originally published by eclipse.aero and is hosted on Sprinkle with full text and specs.