SUPER CUB PARTS CATALOG
PIPER PA-18 · Parts Catalog
Overview
The Piper PA-18 Parts Catalog provides detailed information for identifying and ordering replacement parts for the Piper Super Cub (PA-18) and its agricultural variants. It includes a structured layout of parts, illustrations, and ordering instructions, ensuring users can easily find the necessary components for maintenance and repairs.
- Designed for Piper Super Cub (PA-18) Models 95, 105, 125, 135, and 150.
- Includes parts for PA-18A Agricultural Models 125, 135, and 150.
- Catalog is divided into eleven major sections.
- Each section contains illustrations and parts listings.
- Optional Equipment Kits are listed in the catalog.
- Parts must be ordered through authorized distributors.
- Revisions are periodically issued to keep the catalog current.
- Do not use this catalog for rigging and installation purposes.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
Document
Source
Copy found at aeroelectric.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Parts Catalog
- Year ·
- 1982
- File size ·
- 10 MB
- Copy found at ·
- aeroelectric.com
- Language ·
- en
What is the SUPER CUB PARTS CATALOG?
The SUPER CUB PARTS CATALOG is a parts catalog for the PIPER PA-18, dated 1982.
What year was the SUPER CUB PARTS CATALOG published?
The SUPER CUB PARTS CATALOG — the PIPER PA-18 parts catalog on file — is dated 1982.
Common. One of the most common aircraft types we track.
Most owners only have the POH. Here's the essential set for the PIPER PA-18.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
PIPER PA-18 for sale now
Free — save the 18 to your watchlist and track it in one place.
Related documents
If you fly the PIPER PA-18, you may also be researching these.
In this document
Introduction
This section explains the purpose of the catalog and its arrangement, emphasizing that it is for identifying replacement parts only.
How to Identify a Part
Instructions on locating parts using illustrations and the parts listing, including tips for finding the correct section.
How to Order Parts
Guidelines for placing orders, including necessary information such as model and serial number.
General Information
Details on handling shortages, returned goods, and transportation liabilities.
Serial Number Information
Lists the serial number ranges for various PA-18 models and years to assist in ordering the correct parts.
Revisions
Outlines the revision history of the catalog, indicating the dates of updates and the importance of using the latest information.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Safety notes
- This catalog should not be used for rigging and installation purposes.
- Claims for errors or shortages must be made within three days after receipt of orders.
- No material should be returned without prior written permission.
- The Piper Aircraft Corporation is not liable for damages to parts in transit.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Full document text
PA-18 SUPER CUB PARTS C A T A L O G CARD 1 O F 1 PIPER AIRCRAFT CORPORATION a [PART NUMBER 752 4 5 1 ) 1 A 1 Courtesy of Bomar Flying Service www.bomar.biz PIPER PARTS CATALOG • AEROFICHE EXPLANATION AND REVISION STATUS The Pans Catalog information incorporated i n this set of Aerofiche cards has been arranged i n accordance with the general specifications of Aerofiche adopted by the General Aircraft Manufacturer's Association. Conversion of Aerofiche alpha/numeric code numbers: First number is the Aerofiche card identifier. Letter is the horizontal line reference per card. Second number is the vertical line reference per card. Example: 2J16 = Aerofiche card number two of given set. Grid location J16. To aid i n locating the various sections and related information desired. the following is provided: A complete Catalog Table of Contents is given at Grid 1A8 of Aerofiche card number 1 of this set. Each additional card in t h ~ sset will have a Table of Contents for all sections on that particular card. This table will start at Grid A3. REVISIONS The information compiled i n this Aerofiche Parts Catalog will be kept current by revisions distributed periodically. These revis~onswill supersede all previous revisions and will be complete Aerofiche card replacements and shall supersede Aerofiche cards of the same number In the set. Current Revisions to this PA-18 Parts Catalog issued March 5. 1973 are as follows: 752 451 (PR751121) ................................... Dated November 1975 752 451 (PR770121) ..................................... Dated January 1977 752 451 (PR770907) ................................... Dated September 1977 752 451 (PR780916) ................................... Dated September 1978 752 451 (PR790817) ...................................... Dated August 1979 752 451 (PR801113) ................................... Dated November 1980 752 451 (PR811 104) ................................... Dated November 1981 752 451 (PR821 109) ................................... Dated November 1982 NOTE: Refer to the last card of the Plper - Pans Price List - Aerofiche for a check list of current revlslon dates and card effectlvities for this parts catalog. REVISED: NOVEMBER 1982 PIPER PARTS CATALOG INTRODUCTION This Illustrated Parts Catalog is designed to provide simple but positive identification of replacement parts for the Piper Super Cub (PA-18) Models 95, 105, 125. 135 and 150; and the Piper Agricultural (PA-18A) Models 125. 135 and 150 manufactured by the Piper Aircraft Corporation of Lock Haven, Pennsylvania. NOTE: UNDER NO CIRCUMSTANCES SHALL THIS CATALOG BE USED FOR RIGGING AND INSTALLATION PURPOSES. It is suggested that this catalog be thoroughly studied to determine its arrangement prior to its utilization. 1. The catalog is divided into eleven (11) major sections described as follows: a. Sections I to X inclusive contain all replacement parts for the complete airplane. Each section is subdivided and each division includes an illustration and a parts listing. b. Section XI is the Miscellaneous Group. This group includes a listing of the Optional Equipment Kits. 2. The following is a brief explanation of the columns in the parts listing: a. The "FIGURE AND INDEX" column indicates the illustration figure number and its parts index number. Example: (2-I), the 2 is the figure number and the 1 is the index number. The figure number appears only at the top of each parts listing page or at the beginning of each new parts listing. b. The "PART NUMBER" column contains the identifying number of the replacement part and this number must be shown on ell Parts Orders. c. The "CODE" column is for the purpose of indicating special uses of the part. An explanation of the letter code used is shown below each listing. d. The "NOMENCLATURE" column indicates the part name. This name must be shown on all Parts Orders. e. The "NO. REQ." (Number Required) column represents the total quantity of parts used per aircraft per figure when the part is not indented and the quantity of parts used per assembly when the part is indented. The symbol "AR" listed in this column means "As Required". f. The "SERIAL NUMBERS AFFECTED" column indicates the part application by airplane serial number. Indention Example: Indentations of listings in the "Nomenclature column" indicate "assemblies and "components" or "parts", in order of their indentations. - This listing is interpreted as follows: If the DOOR ASSEMBLY (not indented) is ordered. it will include the three items listed under that item. Figure and Index Number If the FRAME ASSEMBLY (indented one space) is ordered, it will include the two items listed under the sub-assembly. Part Number If you want only a HINGE ASSEMBLY or CLIP, you order only that item. Code 3. The "ATTACHING PARTS" such as nuts, bolts, screws, etc.. that are available as commercial hardware items. are not generally supplied by the Piper Aircraft Corporation. The catalog lists, for your convenience. those attaching parts required for main assemblies and installation. The identifying number for these parts appears after the part name. EXAMPLE NOMENCLATURE DOOR ASSEMBLY - Baggage compartment FRAME ASSEMBLY - Baggage compartment door + HINGE ASSEMBLY - Baggage door CLIP - Baggage door sprlng No. Req. 1 1 1 1 4. All items of Optional Equipment are contained in the parts list in their proper sequence and sections. These items were not marked optional, since they are fully identified by their descriptions. SERIAL NUMBERS AFFECTED REVISED: NOVEMBER 1980 PA-18 P I P E R A I R C R A F T C O R P O R A T I O N HOW TO IDENTIFY A PART IF YOU KNOW WHAT I T LOOKS LIKE AND KNOW WHERE I T IS LOCATED 1. Refer t o Figure 1 to determine the Section Number in which the part is located. 2. Refer t o the Table of Contents and locate the section. Note the figure numbers that illustrate the various subgroups of this main section.
Show full textShow less
a. Sdect the figure title you think might contain the paR you wish to identify and turn to the grid (page) sgecified. 3. Find the part on the illurtration and note the index number. NOTE: I f you don't find the part on this illustration, try another figure in this group. 4. Refer t o the "Figure and Index Number" in the Pam Listing for complete description of the part. HOW TO ORDER PARTS In ordering para for your Piper Airplane, observe the following instructions which will aid in your getting the right parts required without delay: a. Place your order with the distributor or dealer for your territory, since parts ere available only through our distributor organization. b. Alwws specify the model and serial number of your airplane. c. Always specify Pan Numbcr, Name, Type a d Q~antityRequired. d. Specify the method of shipment - freight, express, preel post. air express, air freight or air pareel past. Where the nature of the shipment requires it or when no Instructions are given, we rerewe the right to ship the most suitable way. GENERAL INFORMATION a. Shortages All ordsrs are checked and rechecked before leaving our Shipping Department. A packing slip is enclosed with the shipment and claims for erron or shortages m m be made within three days after receipt of orders. b. Returned Goods No material should be returned to us without first securing our writtan permission. Material sent in without notiar,will be held at the owner's risk for thrity (30) days and will then be dirpored of as we me fit. Transportation charger must ba PREPAID on returned goods or the hipmmt will be refuad. c. Transportation Liabilities The Piper Airaeft Corporation cannot be held liable for damages to perts in transit from the factory. If a shipment is received in a damaged condition, haw the delivery man or Transportation Compny make a notation of the damage and file your cleim with the Carrier. In care of concealed damage, do not attempt to remove the pmt from the hipping container, or endeavor t o repair the damage, but call the Carrier and have his Claim Agent inspect the damage before filing your c l l m with the Carrier. REVISED: JANUARY 1977 PIPER PARTS CATALOG • PA-18 AND PA-18A SERIAL NUMBER INFORMATION The following information should be kept i n mind when ordering from this catalog: a. The serial numbers of the aircraft covered by this Parts Catalog are as follows: (1) Serial numbers of the 1950 PA-18 Models 95 and 105 are 18-1 to 18-548 inclusive. (2) Serial numbers of the 1951 PA-18 Models 95 and 125 are 18-549 to 18-1214 inclusive. (3) Serial numbers of the 1952 PA-18 Models 95. 125 and 135 are 18- 1215 to 18-1969 inclusive. (4) Serial numbers of the 1953 PA-18 Model 135 are 18-1970 to 18-3013 inclusive. (5) Serial numbers of the 1952 PA-18A Models 125 and 135 are 18-1262 to 18-2146 inclusive. (6) Serial numbers of the 1953 PA-18A Model 135 are 18-2147 to 18-3013 inclusive. (7) Serial numbers of the 1954 PA-18 Models 95 and 135 are 18-3014 to 18-3770 inclusive, and 18-3772 to 18-3780 inclusive. (8) Serial numbers of the 1954 PA-18A Model 135 are 18-3020 to 18-3780 inclusive. (9) Serial numbers of the 1955 PA-18 Models 95. 135 and 150 are 18-3771, 18-3781 to 18-4617 inclusive. (10) Serial numbers of the 1955 PA-18A Models 135 and 150 are 18-3781 to 18-4617 inclusive. (11) Serial numbers of the 1956 PA-18 Models 95 and 150 are 18-4618 to 18-5294 inclusive. (12) Serial numbers of the 1956 PA-18A Model 150 are 18-4619 to 18-5294 inclusive. (13) Serial numbers of the 1957 PA-18 Models 95 and 150 and PA-18A Model 150 are 18-5295 to 18-5803 inclusive and 18-5805 to 18-6115 inclusive. (14) Serial numbers of the 1958 PA-18 Models 95 and 150 and PA-18A Model 150 ere 18-5804 and 18-61 16 to 18-6684 inclusive. (15) Serial numbers of the 1959 PA-18 Models 95 and 150 and PA-18A Model 150 are 18-6685 to 18-7172 inclusive. (16) Serial numbers of the 1960 PA-18 Models 95 and 150 and PA-18A Model 150 are 18-7173 to 18-7520 inclusive. (17) Serial numbers of the 1961 PA-18 Model 95 are 18-7521 to 18-7632 inclusive. (18) Serial numbers of the 1961 PA-18 Model 150 are 18-7521 to 18-7746 inclusive. (19) Serial numbers of the 1962 PA-18 Model 150 are 18-7747 to 18-7871 inclusive. . (20) Serial numbers of the 1963 PA-18 Model 150 are 18-7872 to 18-8045 inclusive. (21) Serial numbers of the 1964 PA-18 Model 150 are 18-8046 to 18-8199 inclusive. a (22) Serial numbers of the 1965 PA-18 Model 150 are 18-8200 to 18-8338 inclusive. (23) Serial numbers of the 1966 PA-18 Model 150 are 18-8339 to 18-8464 inclusive. (24) Serial numbers of the 1967 PA-18 Model 150 are 18-8465 to 18-8601 inclusive. (25) Serial numbers of the 1968 PA-18 Model 150 are 18-8602 to 18-8743 inclusive. (26) Serial numbers of the 1969 PA-18 Model 150 are 18-8744 to 18-8851 inclusive. (27) Serial numbers of the 1970 PA-18 Model 150 are 18-8852 to 18-8919 inclusive. (28) Serial numbers of the 1971 PA-18 Model 150 are 18-8920 to 18-8963 inclusive. (29) Serial numbers of the 1972 PA-18 Model 150 are 18-8964 to 18-9002 inclusive. (30) Serial numbers of the 1973 PA-18 Model 150 are 18-7309016 to 18-7309025 inclusive. (31) Serial numbers of the 1974 PA-18 Model 150 are 18-7409026 to 18-7409151 inclusive. (32) Serial numbers of the 1975 PA-18 Model 150 are 18-7509001 to 18-7509142 inclusive. (33) Serial numbers of the 1976 PA-18 Model 150 are 18-7609001 to 18-7609157 inclusive. (34) Serial numbers of the 1977 PA-18 Model 150 are 18-7709001 to 18-7709198 inclusive. (35) Serial numbers of the 1978 PA-18 Model 150 are 18-7809001 to 18-7809188 inclusive. (36) Serial numbers of the 1979 PA-18 Model 150 are 18-7909001 to 18-7909200 inclusive. (37) Serial numbers of the 1980 PA-18 Model 150 are 18-8009001 to 18-8009061 inclusive. (38) Serial numbers of the 1981 PA-18 Model 150 are 18-8109001 to 18-8109086 inclusive. (39) Serial numbers of the 1982 PA-18 Model 150 are 18-8209001 to 18-8209025 inclusive. - (40) Serial numbers of the 1983 PA-18 Model 150 are 18-8309001 and up. b. The fuel tank installed i n the right wing panel is Optional Equipment on PA-18 Models 95, 105 and 125 and on the PA-18A Model 125 and Standard Equipment on the PA-18 and PA-18A Models 135 and 150. The pans required for this installation are listed i n their individual sections and. wherever the part is the same as used for the fuel tank installation i n the leh wing panel and i n the same location, the following note appears directly under the Nomenclature of the part: (xx per ship when fuel tank installed i n right wing). Whenever the part is used only when the fuel tank is installed i n the right wing panel, (A) precedes the name (Nomenclature) of the pan. c. SPECIAL NOTE: PA-18 aircraft serial numbers 18-2520, 18-2521, 18-2522. 18-2523 and 18-2524 were equipped with special flap handle installation, toe brakes and special seats i n accordance with Drawing Number SK-449. When ordering replacement parts for these airplanes, i t is suggested this drawing be secured from Piper for positive pans identification. REVISED: NOVEMBER 1982 P I P E R A I R C R A F T C O R P O R A T I O N STANDARD PAINT CHART MFG. PIPER PART NUMBER 1950 1951 1952 1953 1954 1955 1956 1957 1958andup NO. QUART GALLON DOPE - NITRATE Lock Haven Yellow Tucson Cream Miami Blue Sacramento Grwn Boston Maroon Hickory Brown DOPE - BUTYRATE Lock Haven Yellow Tucron Cream Miami Blue Sacramento Green Boston Maroon Hickory Brown Tennessee Red Polar Gray Tennessee Red "52" Forest Green Lemon Yellow Cream Yellow Sportsmen Beige Tampico Green Sun Valley Ivory Daytona White Cadillac Red Santa Fe Red Pontiac Red Juneau White DOPE -Clear, Nitrate DOPE - Clear, Butyrate DOPE - Aluminum, Nitrate DOPE -Aluminum, Butyrate PRIMER - Zinc Chromate THINNER - Nitrate THINNER - Zinc Chromate THINNER - Butyrate THINNER - Enamel REVISED: JANUARY 1977 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X P I P E R A I R C R A F T C O R P O R A T I O N STANDARD PAINT CHART MFG. PIPER PART NUMBER 1950 1951 1952 1953 1954 1955 1956 1957 1958andup NO. QUART GALLON ENAMEL Lock Haven Yellow Tennosam Red Tucson Cream Miami Blue Sacramento Green Boston Maroon Hickory Brown Forest Grmn Polar Gray Tenneuee Red "52" Lemon Yellow Cream Yellow Sportsmen Beige Tampia, Green Sun Valley Ivory Rapid Uty Blaek Daytone White Cadillac Red Santa Fe Red a Pontiac Red ' Juneau White X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X REVISED: JANUARY 1977 PIPER PARTS CATALOG TABLE OF CONTENTS FIGURE NUMBER 1 FIGURE TITLE .................................... Exploded View of Complete Airplane SECTION I WING GROUP GRID NUMBER .... 1 A l l ....................................................... W i n g and Fuel Tank lnstallation .............................................................. Coveredwing Assembly Wing Panel Assembly. Uncovered (Showing Leading Edge) .............................. Wing Panel Assembly. Uncovered (Showing Trailing Edge) PA-18 "95" .S/N 18-1 and up . PA-18 "1 0 5 " . "1 25" and "1 35" .S/N 18-1 to 18-3770 inclusive. ......................................................... 18-3772 to 18-3780 inclusive W i n g Panel Assembly . Uncovered (Showing Leading Edge) PA-18 "135" and "150" . ........................................................ S / N 18.3771. 18-3781 and up Flap Assembly (PA-18-15 0 S/N 18-7809001 and up) ................................... Aileron Assembly (PA-18-150 S/N 18-7809001 and up) ................................ ..................................................................... Strut lnstallation SECTION II FUSELAGE GROUP ............................................. Covered Fuselage Assembly. Left View ............................................... Covered Fuselage Assembly. Right View ............................................................ Fuselage Frame Assembly ..................................................................... Seats lnstallation ............................................. Rudder Pedals and Floorboards lnstallation ................................... Throttle. Cabin and Carburetor Heat Mixture Controls ............................................... lnstrument Panels Installation. Standard ................................... . Instrument Panels Installation Advanced and Primary ........................ lnstrument Panels Installation. Gyro (S/N 18-1 to 18-8019 incl.). .............................. lnstrument Panels Installation. Gyro (S/N 18-8020 and up) SECTION Ill AGRICULTURAL GROUP Fluid Spray Pump Installation (PA-18A Only) ........................................... ....................................................... Boom lnstallation (PA-18A Only) .......................................... Sprayer Equipment lnstallation (PA-18A Only) ........................................... Duster Equipment lnstallation (PA-18A Only) ..................................................... Hopper lnstallation (PA-18A Only) ......................................... Cargo Compartment lnstallation (PA-18A Only) Emergency Dump lnstallat~on(PA-18A Only) ........................................... SECTION IV TAIL GROUP Tail Surface Installation ............................................................... REVISED: NOVEMBER 1982 PIPER PARTS CATALOG TABLE OF CONTENTS FIGURE NUMBER FIGURE TITLE GRID NUMBER SECTION V CHASSIS GROUP Landing Gear Installation ............................................................. .................................... Wheel and Brake Drum Assembly (Hayes Industries) BrakeAssembly(Cleveland) ........................................................... M a i n Wheel Assembly (Cleveland) ..................................................... Wheel Fender Installation ............................................................. Tail Wheel Installation (6" Maule and Scott) ............................................ Tail Wheel Installation (8" Maule)...................................................... Brake Installation ..................................................................... SECTION VI POWER PLANT GROUP .................................................... Power Plant lnstallation (Lycoming) Power Plant Installation (Continental) .................................................. Spinner Installation ................................................................... Cowl Installation (Lycoming) ........................................................... Cowl Installation (Continental) ......................................................... Baffles Installation (Lycoming and Continental) ......................................... ................................................. Special Carburetor Air Box lnstallation Vacuum Pump Installation (Wet) ....................................................... Vacuum Pump Installation (Dry) ....................................................... SECTION VII FUEL SYSTEM GROUP Fuel System Installation ............................................................... 1G12 SECTION Vlll ELECTRICAL SYSTEM GROUP Electrical System Installation ...................................................... Electrical Components Installation ................................................. Battery Box Installation ........................................................... Wing Light and Strobe Light Installation ............................................ Landing Lightlnstallation ............................................................. Electric Fuel Gauge Installation ("1 50") ................................................ 35 AMP Generator Installation ("1 50") ................................................. ........................................... Speaker and Dome Light lnstallation ("1 50") REVISED: NOVEMBER 1982 PIPER PARTS CATALOG TABLE OF CONTENTS FIGURE NUMBER FIGURE TITLE SECTION IX CONTROL SYSTEM GROUP ............................................... Elevator and Aileron Control lnstallation .............................................................. Elevator Control System ............................................................... Aileron Control System ............................................................... udder 'Control System Flap Control System .................................................................. .................................................. Adjustment Stabilizer Control System ................................................ Stabilizer Adjustment Crank Installation ............................................................ Stabilizer Adjustment Yoke SECTION X RADIO GROUP GRID NUMBER ................................................................ Radio Installation. G.E. 116 ................................................. Radio Installation. Bendix PARTR-1OA 118 .................................................... Radio Installation. Bendix PAT-5OA 1110 ........................................................ Radio Installation. Lear LTRA-5 1112 .............................................................. Radio Installation. Narco 1115 ............................................................ Radio Installation. Genave 1118 .............................................................. Radio Installation. PTR-1 1121 . Piper Automatic Locator (ELT) Installation (Garren Mfg Ltd) ............................. 1123 Piper Automatic Locator (ELT) Installation (Communications Components Corp.) ........... 1J1 Piper Automatic Locator (ELT) Installation (Narco Avionics) .............................. 1J3 SECTION XI MISCELLANEOUS GROUP .............................................................. Optional Equipment Kits 1J5 NUMERICAL INDEX 1J9 REVISED: NOVEMBER 1982 P I P E R A I R C R A F T C O R P O R A T I O N XI MISCELLANEOUS ISSUED: MARCH 1973 Figure 1. Exploded View of Complete Airplane 1 All 'RICAL PA- 18 PIPER PARTS CATALOG REVISED: NOVEMBER 1980 Figure 2. Wing and Fuel Tank Installation 1A12 SECTION I Wing Group WING AND FUEL TANK INSTALLATION When ordering, always specify Part Number, Description and Serial Number of Aircraft ISSUED: MARCH 1973 1 A13 Figure and Index Number 2- -1 -2 -3 -4 -5 -6 -7 Part Number 12322 12554 13253 12544 13766 14477 14482 14487 12276-00 12276-01 19657-00 11523-00 12274-00 12274-02 12275-00 12275-01 11719-00 11719-01 10624-02 10624-06 12779-00 12779-04 12779-08 14400-00 14400-04 fm SERIAL NUMBERS AFFECTED (PA-18only) 18-1 to 18-3770, 18-3772to 18-3780incluslve (PA-18A only) 18-1215 to 18-3770, 18-3772 to 18-3785 inclusive (PA-18only) 18-3771, 18-3781 and up (PA-18Aonly) 18-3771, 18-3786 and up 18-3771. 18-3781 and up 18-1 to 18-468 inclusive 18-469 and up 18-1 to 18-468 inclusive 18-469 and up 18-1810 to 18-3770 inclusive, 18-3772 to 18-3780 inclusive 18-3771, 18-3781 to 18-8919 18-8920 and up NOMENCLATURE -DRAWING - Rigging Diagram DRAWING - Aircraft Dimension and Control Surface Travel DRAWING - Aircraft Dimension and Control Surface Travel DRAWING - Wing and Fuel Tank Installation "95". "105" and "125" DRAWING - Wing and Fuel Tank Installation "135" and "150 DRAWING - Aircraft Dimension and Control Surface Travel "135" and "150 DRAWING - Aircraft Dimension and Control Surface Travel "135" and "150" DRAWING - Aircraft Dimension and Control Surface Travel "95" FAIRING - Wing root, LH FAIRING - Wing root, RH MOULDING - Rubber FAIRING - Wing root, top FAIRING - Wing root, bottom front, LH FAIRING - Wing root, bottom front. RH FAIRING - Wing root, bottom rear, LH FAIRING - Wing root, bottom rear, RH PLATE - Fairing attachment, "105': "125", "135" and "150, LH PLATE - Fairing attachment, "105", "125". "135" and "150". RH PANEL ASSEMBLY - Wing, fabric covered, "95", LH PANEL ASSEMBLY - Wing, fabric covered, "95". LH PANEL ASSEMBLY - Wing, fabric covered, "105". LH PANEL ASSEMBLY - Wing, fabric covered, "105" and "125". LH PANEL ASSEMBLY - Wing, fabric covered, "135", LH PANEL ASSEMBLY - Wing, fabric covered, "135" and "150". LH PANEL ASSEMBLY - Wing. ceconite covered, "150, LH zP ID;a 1 1 2' 2 1 1 1 1 1 1 1 1 1 1 1 1 1 WING AND FUEL TANK INSTALLATION SECTION I Wing Group Figure l z x 1 N z b r Number 2-7 10624-05 10624-03 12779-01 IPIPER PARTS CATALOG Cod. 1 NOMENCLATURE PANEL ASSEMBLY - Wtng, fabric covered, "1 35" and "1 5 0 , RH PANEL ASSEMBLY - W~ng,ceconite covered, "1 50". RH ENVELOPE - Wing, ceconite, left ENVELOPE - Wing, ceconite, right BOLT - (AN5-17A) WASHER - (AN960-516) NUT - (MS20365-524C) BOLT - (AN5-16A) WASHER - (AN960-516) NUT - (MS20365-524C) FAIRING - Flap. "105". "1 25". "1 35". and " 1 5 0 . LH FAIRING - Flap, "105". "1 25". "135". and "150". RH FLAP ASSEMBLY - Fabric covered, "105". "1 25". "1 35". and "150, LH FLAP ASSEMBLY - Ceconite covered. "1 5 0 , LH FLAP ASSEMBLY - Aluminum, "150. Left FLAP ASSEMBLY - Fabric covered, "105". "1 25". "1 35" and "1 50". RH FLAP ASSEMBLY - Ceconite covered, "1 50". RH FLAP ASSEMBLY - Aluminum, "150" Right GROMMET - Drain, "105". "125". "135" and "1 5 0 ENVELOPE - Flap assembly, ceconite FLAP ASSEMBLY - Uncovered, "105". "1 25". "1 35" and "1 5 0 , LH FLAP ASSEMBLY - Uncovered, "105". "125". "135" and "1 50". RH HINGE - Flap, inboard, "105". "1 25". "1 35" and "150" HINGE - Flap, outboard, "105". "125". "135" and "150" AILERON ASSEMBLY - Fabric covered, U-l AILERON ASSEMBLY - Ceconite covered, LH AILERON ASSEMBLY - Aluminum, left AILERON ASSEMBLY - Fabric covered, RH AILERON ASSEMBLY - Ceconite covered, RH AILERON ASSEMBLY - Aluminum, Right GROMMET - Drain ENVELOPE - Aileron assembly, ceconite I AILERON ASSEMBLY - Uncovered. LH ' AILERON ASSEMBLY - Uncovered, RH HINGE - Center HINGE - Inboard and outboard HORN ASSEMBLY A A A - Used when fuel tank is installed in right wing. B - See Figure 6A for component parts. C - See Figure 6B for component parts. PANEL ASSEMBLY - Wtng, fabric covered, "95". RH PANEL ASSEMBLY - Wing, fabric covered, "95". RH PANEL ASSEMBLY - Wing, frabric covered, "105" and "1 25". RH PANEL ASSEMBLY - Wing, fabric covered, "105". "1 25" "1 35". RH NO. / SERIAL NUMBERS Req. AFFECTED 18-3771, 18-3781 to 18-8919 18-8920 and up 18-8920 and up 18-8920 and up 1 . 18-1 to 18-8919 inclusive 18-8920 10.18-7709198 inclusive 18-7809001 and up 18-1 to 18-3770 inclusive, 18-3772 to 18-3780 inclusive 1 1 1 7 1 1 18-1 to 18-7709198 incl. 18-1 to 18-8919 inclusive 18-8920 to 18-7709198 incl. 18-7809001 and up 18-1 to 18-7709198 incl. 18-8920 to 18-7709198 incl. 1 1 18-1 to 18-7709198 incl. I 18-1 to 18-7709198 incl. When adering, always specify Part Number. Description and Serial Number of Aircraft 1 1 1 1 1 1 1 9 1 1 1 1 2 1 REVISED: AUGUST 1979 18-1 to 18-7709198 incl. 18-1 to 18-8919 inclusive 18-8920 to 18-7709198 incl. 18-7809001 and up 18-1 to 18-8919 inclusive 18-8920 to 18-7709198 incl. 18-7809001 and up 18-1 to 18-7709198 incl. 18-8920 to 18-7709198 incl. 18-1 to 18-7709198 incl. 18-1 to 18-7709198 incl. 18-1 to 18-7709198 incl. 18-1 to 18-7709198 incl. 18-1 to 18-7709198 incl. PA-18 SECTION I Wing Group WING AND FUEL TANK INSTAUATION Figure and Index Number PIPER PARTS CATALOG - NOMENCLATURE A - Used when fuel tank is installed in right wing. B - Used on Fuel Cap Stamped 610 only. COVER - Pulley COVER ASSEMBLY - Fuel tank, LH A COVER ASSEMBLY - Fuel tank RH COVER ASSEMBLY - Fuel tank, LH COVER ASSEMBLY - Tank brace (4 per ship when fuel tank i No. B A A SERIAL NUMBERS AFFECTED installed in right wing) FELT - Top (4 per ship when fuel tank is installed in right wing) FELT - Bottom (4 per ship when fuel tank is installed in right wing) FELT - Front (4 per ship when fuel tank is installed in right wing) FELT - SAE F-50, tank cover (10 ft. per ship when fuel tank is installed in right wing) STUD - Tank strap (4 per ship when fuel tank is installed in right wing) CAP - Tank (2 per ship when fuel tank is installed in right wing) GASKET - Cap (2 per ship when fuel tank is installed in right wing) WASHER - Fuel seal (2 per ship when fuel tank is installed i~ right wing) TANK ASSEMBLY - Fuel, LH TANK ASSEMBLY - Fuel, LH TANK ASSEMBLY - Fuel. RH + FLANGE - Fuel tank filler cap HOSE - (2 per ship when fuel tank is installed i n right wing) CLAMP - GS6SS Type "F" (4 per ship when fuel tank is installed in right wing) NIPPLE - (AN840-6D) (2 per ship when fuel tank is installed in right wing) HOSE - Flexible, upper HOSE - Flexible, lower, LH HOSE - Flexible, LH HOSE - Flexible CLAMP - GS4SS Type "F" (12 per ship when fuel tank is installed in right wing) GAUGE ASSEMBLY - Fuel, left GAUGE ASSEMBLY - Fuel. right GAUGE + TUBE - Glass + FLOAT WASHER + BUSHING 18-469 and up 18-1 to 18-468 inclusive 18-1 to 18-468 inclusive 18-469 and up 18-469 and up 18-469 and up 18-1 to 18-468 inclusive When ordering, always specify Part Number, Description and Serial Number of Aircraft REVISED: NOVEMBER 1980 1A15 WING AND FUEL TANK INSTALLATION SECTlON I Wing Group Figure and Index Number Part Number REVISED: NOVEMBER 1980 1 A 1 6 Code A A B When PIPER PARTS CATALOG NOMENCLATURE ELBOW - (AN842-4) left, top 'ELBOW - (AN914-1D) right, top ELBOW - Bonom FITTING - Tee, right (1K27-1) GROMMET - (AN931-10-14) Left HOSE - Flexible BE - Strainer to hose. LH %lNG - Connector (W/H No. 234 x 4) STRAINER ASSEMBLY - Tank outlet (3 per ship when fuel tank is installed in right wing) (1 per ship left wing - airplane serial numbers 18-1 to 18-468 inclusive) TEE - (3141-3-4D) (when fuel tank is installed in right wing) TEE - (3141 -3-40) LH ELBOW - (AN914-1D) (used when fuel tank is installed in right wing) ELBOW - (AN914-1D) Left wing WINDOW - Landing light. "95". "105". "1 25" and "1 35" WINDOW - Landing light, "1 35" and "1 50" PIN - Hinge, aileron and flap (AN394-41) WASHER - (AN960-416) WASHER - (AN960-416L) WASHER - (AN960-416) WASHER - (AN960-416L) KIT - Rib repair 'CAPSTRIP MATERIAL DIAGONAL RIB BRACING - .020 RIB CAPSTRIP REPAIR STRIP FRONT SPAR ANGLE BRACE - Rear REAR SPAR ANGLE BRACE - Front REAR SPAR ANGLE BRACE - Rear NOSE RIB REPAIR SECTION 3/32" x 1/4", No. 2 5 0 aluminum rivets TAB - Aileron trim TUBE ASSEMBLY - Airspeed (pitot and static) "135" and "1 5 0 A - Used when fuel tank is installed in right wing. B - Used on airplanes with serial numbers 18-1 to 18-3770 inclusive, 18-3772 to 18-3780 inclusive. ordering, always specify Part Number, Description and Serial No. Ref& 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 10 AR AR AR AR 1 12' 12' 5 4 3 3 3 % Ib. 1 1 Number of SERIAL NUMBERS AFFECTED 18-469 and up 18-469 and up 18-489 and up 18-469 and up 18-1 to 18-468 inclusive 18-1 to 18-468 inclusive 18-3771, 18-3781 and up 18-1 to 18-7709198 inclusive Aircraft 1 A17 INTENTIONALLY LEFT B U N K SECTION I Wing Group COVERED WING ASSEMBLY ISSUED: MARCH 1973 Figure 3. Covered Wing Assembly Figure and Index Number 3 - - 1 -2 -3 -4 -5 -6 -7 -8 -9 - 10 -11 -12 z0 IDA P AR AR 8 Part Number 12779 10624 14400 82461-00 12761 -02 81232-15 85012-78 80122-51 80541-02 80122-53 6067 1-00 15761-00 60863-03 60863-09 11473-47 SERIAL NUMBERS AFFECTED 18- 1 t o 18-3770 inclusive, 18-3772 t o 18-3780 inclusive 18-3771, 18-3781 and up % NOMENCLATURE DRAWING - Wing Assembly. Covered, "105". "125"and " 135" DRAWING - Wing Assembly, Covered. "95" DRAWING - Wing Panel Assembly, Covered, "135" and "150" COVER - Rectangular COVER - Round DISC - Pyralin, jig hole c o v e r GROMMET - Round GROMMET - Reinforcing, pyralin GROMMET - Cover GROMMET - Drain GROMMET - Aileron pulley c o v e r REINFORCEMENT - Pyralin REINFORCEMENT - L e a t h e r REINFORCEMENT - L e a t h e r PLATE - Reinforcing INTENTIONALLY LEFT BLANK PIPER PARTS CATALOG REVISED. NOVEMBER 1980 Figure 4. Wlng Panel Assemblv. Uncovered (Showlng Leading Edge) SECTION I Wing Group PIPER PARTS CATALOG I Coda I NOMENCLATURE DRAWING - Wing panel assembly. uncovered, "105". "125" and "135" DRAWING - Wing panel assembly, uncovered, "135" and "150" DRAWING - Wing panel assembly, uncovered, "95" WlNG PANEL ASSEMBLY - Uncovered, "95". LH WING PANEL ASSEMBLY - Uncovered, "95". LH WlNG PANEL ASSEMBLY - Uncovered. "95". RH A WING PANEL ASSEMBLY - Uncovered, "95". RH WlNG PANEL ASSEMBLY - Uncovered. "105" and "125". RH A WING PANEL ASSEMBLY - Uncovered, "105". "125" and "135". RH WlNG PANEL ASSEMBLY - Uncovered, "105". LH WlNG PANEL ASSEMBLY - Uncovered, "105" and "125". LH WlNG PANEL ASSEMBLY - Uncovered, "135". LH WlNG PANEL ASSEMBLY - Uncovered. "1 35" and "150". LH WlNG PANEL ASSEMBLY - Uncovered, "135" and and "150". RH LIGHT - Landing (4509) COVER ASSEMBLY - Leading edge, LH B COVER ASSEMBLY - Leading edge, LH, "95". "105" "125" and "135" AC COVER ASSEMBLY - Leading edge, RH, "95". "105". "125" and "135" COVER - Leading edge, RH (When fuel tank not installed), "95". "105". "125" COVER - Leading edge inboard. RH#l, "135" and "150" COVER - Leading edge inboard. LH#l, "135" and "150" C COVER ASSEMBLY - Leading edge, LH, "95". "105" "1 25" and "135" AC COVER - Leading edge, RH. "95". "105". "125" and "135" COVER - Leading edge, center inboard section, LH#2. "135" and "150" COVER - Leading edge, center inboard section. RH#2, "135" and "150" A - Used when fuel tank is installed in right wing. B - Used on PA-18 "95" airplanes with serial numbers 18-469and up. Used on PA-18 and PA-18A "105". "1 25" and "135" airplanes with serial numbers 18-489 to 18-3770, 18-3772 to 18-3780inclusive. C - Used on PA-18 "95" airplanes with serial numbers 18-1 and up. Used on PA-18 and PA-18A "105". "1 25" and "135" airplanes with serial numbers 18-1 to 18.3770. 18-3772to 18-3780 inclusive. When ordering. always specify Part Number, Description and Serial Number of Aircraft WlNG No. RW . 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 1 1 1 1 REVISED: NOVEMBER 1980 l A 2 l PANEL ASSEMBLY, UNCOVERED (Showing Leading Edge) SERIAL NUMBERS AFFECTED 18-1 to 18-3770 incl. and 18-3772 to 18-3780 inclusive 18-3771, 18-3781 and up 18-1 and up 18-1 to 18-468 inclusive 18-469and up 18-1 to 18-3770 inclusive and 18-3772to 18-3780inclusive 18-1 to 18-468inclusive 18-469and up 18-1810 to 18-3770 inclusive and 18-3772to 18-3780 inclusive 18-3771,18-3781 and up 18-3771, 18-3781 and up 18-1 to 18468 inclusive 18-3771.18-3781and up 18-3771.18-3781 and up 18-3771, 18-3781 and up 18-3771, 18-3781 and up WING PANEL ASSEMBLY, UNCOVERED (Showing Leading Edge) Figum PIPER PARTS CATALOG - and Part Index Number Code NOMENCLATURE Number 4 + COVER - Leading edge. LH. "95". "105". "125" and "1 35" . COVER - Leading edge, RH. "95". "105". "125" and "1 35" COVER - Leading edge, center outboard section. LH#3. "1 35" and "1 50" COVER - Leading edge. center outboard section, RH#3, "1 35" and "1 5 0 COVER ASSEMBLY - Leading edge, "95". "105". "125" and "1 35" COVER - Leading edge outboard No. 4. "1 35" and "1 50" COVER - Tip, leading edge, LH COVER - Tip, leading edge, RH REINFORCEMENT - Leading edge, "95". "105". "1 25" and "1 35" BOW - Wing tip FITTING - Wing tip, bow. rear spar FITTING - Wing tip, bow, rear spar FllllNG - Wing tip, bow, front spar FIlTING - Wing tip, bow, front spar FITTING - Front spar bun hinge BLOCK - Filler FITTING ASSEMBLY - Left strut attachment STRAP ASSEMBLY - Fuel tank STRAP ASSEMBLY - Fuel tank STRAP ASSEMBLY - Fuel tank STRAP ASSEMBLY - Fuel tank STRAP ASSEMBLY - Fuel tank STRAP ASSEMBLY - Fuel tank TUBE - Drag brace, fuel tank TUBE - Drag brace, fuel tank FllllNG - Hinge, rear spar bun ROD - Push pull, flap, "105". "125". "135" and "150" BEARING - Push pull rod, "105". "125". "135" and "150" BELLCRANK - Flap control, "105". "1 25". "1 35" and "1 50" BRACKET - Flap bellcrank, "105". "125". "1 35" and "1 50" ANGLE - Reinforcement, "105". "1 25". "1 35" and "1 50" ANGLE - Reinforcement, "105". "125", "135" and " 1 5 0 BRACKET ASSEMBLY - Flap hinge, "105". "1 25". "1 35" and "1 5 0 IBRACKET ASSEMBLY - Flap hinge, "1 05". "1 25". "1 35" and "1 5 0 A - Used on PA-18 "95" airplanes with serial numbers 18-1 and up. Used on PA-18 and PA-18A "1 05". "1 25" and "135" airplanes with serial numbers 18-1 to 18-3770. 18-3772 to 18-3780 inclusive. When ordering, always specify Part Number, Description and Serial Number of Aircraft No. R*. 1 1 1 1 2 2 1 1 2 2 2 2 2 2 4 4 4 2 4 2 4 2 4 1 2 4 2 2 2 2 4 2 2 2 RNISED: NOVEMBER 1980 1A22 SECTION I Wing Group SERIAL NUMBERS AFFECTED 18-3771, 18-3781 and up 18-3771. 18-3781 and up 18-3771, 18-3781 and up SECTION I Wing Group WING PANEL ASSEMBLY, UNCOVERED (Showing Leading Edge) Figure and Index N u mbar Part Number - Code IPIPER PARTS CATALOG I NOMENCLATURE ' BLOCK - Bearing + RIVET - Steel (1/8" x 15116" L) CHANNEL - Reinforcement, "105". "1 25" and "1 35" PLATE - Stop, "105". "1 25". "1 35" and "1 50" ANGLE - Reinforcement. "95". inboard and outboard aileron hinge ANGLE - Reinforcement, "105". "1 25". "1 35" and "1 50". inboard aileron hinge, outboard ailel hinge, and outboard flap hinge BRACE ASSEMBLY - False spar BLOCK - Filler FllTlNG - Lift strut attachment SPACER SPACER BRACKET ASSEMBLY - Aileron hinge BLOCK ' BLOCK + RIVET - Steel (1/8" x 15/16" L) STOP ASSEMBLY - Aileron BRACKET - Aileron pulley, inboard half, LH BRACKET - Aileron pulley, inboard half, RH BRACKET - Aileron pulley, outboard half, LH BRACKET - Aileron pulley, outboard half, RH BRACKET - Aileron pulley housing attachment BUSHING CATCH - Door CATCH - Door BRACKET ASSEMBLY - Door catch mounting CHANNEL - Door catch attachment ANGLE - Reinforcement. pulley bracket, LH ANGLE - Reinforcement, pulley bracket. RH ANGLE - Reinforcement, center aileron hinge, LH ANGLE - Reinforcement, center aileron hinge. RH ANGLE - Reinforcement, No. 1 drag strut ANGLE - Reinforcement, No. 2 drag strut ANGLE - Reinforcement. No. 2 drag strut ANGLE - Reinforcement, No. 3 drag strut 1 ANGLE - Reinforcement, No. 3 drag strut ANGLE - Reinforcement. No. 5 drag strut ANGLE - Reinforcement. No. 5 drag strut HOUSING - Pulley SCREW - "105". "125" and "135" BOLT - Flap bellcrank to push pull rod (AN3-12A) "1 35" and "1 5 0 A - Used on airplanes with serial numbers 18-1 to 18-721 inclusive. 18-873 to 18-1026 inclusive. 18-1125. 18-1130 and up. B - Used on airplanes with serial numbers 18-722 to 18-872 inclusive, 18-1027 to 18-1124 inclusive, and 18-1 126 to 18-1129 inclusive. C - Used on airplanes with serial numbers 18-232 and up. and all airplanes which had fuel tank installed in right I wing. When ordering, always specify Part Number. Description and Serial Number of Aircraft 'on REVISED: NOVEMBER 1981 1A23 No. Req. 1 1 2 2 2 4 6 12 4 4 2 2 6 1 1 2 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 SERIAL NUMBERS AFFECTED 18-1 to 18-3770 inclusive, 18-3772 to 18-3780 inclusive 18-1 to 18-231 inclusive 18-1 to 18-231 inclusive 18-1 t o 18-3770 inclusive. 18-3772 to 18-3780 inclusive 8-3771, 18-3781 and up WING PANEL ASSEMBLY. UNCOVERED (Showing Leading Edge) SECTION I Wing Group When ordering, always specify Part Number. Description and Serial umber i f Aircraft REVISED: NOVEMBER 1980 1A24 a PIPER PARTS CATALOG REVISED: NOVEMBER 1980 Figure 5. Wing Panel Assembly. Uncovered (Showing Trailing Edge) PA-18 "95" - Serial Nos. 18-1 and up PA-18 "1 05". "125" and "135" - Serial Nos. 18-1 to 18-3770 incl. 18-3772 to 18-3780 ~nclusive SECTION I Wing Group - - - Figure and Index Number Number 10625 I - PIPER PARTS CATALOG - NOMENCLATURE -- Panel Assembly. Uncovered. "95" RAWING - Wing Panel Assembly, Uncovered, "105". "125" and "135" SPAR - False, flap, "105", left SPAR - False, flap, "105". "125". and "135". left SPAR - False, flap, "105" and "125". right (62.625" L.) SPAR - False, flap, "105". "125" and "135". right SPAR - False. flap, "105". "125" and "135". left SPAR - False, flap, "105". "125" and "135". right SPAR - False. aileron, "95". "105". "125" and "135". left SPAR - False, aileron. "95". "105". "125" and "135". right SPAR - False, aileron. "95". "105". "125" and "135". left SPAR - False, aileron, "95". "105". "125" and "135". right BRACE - Channel, "105". "125" and "135". (8.50" L.) BRACE - Channel, "105". "125" and "135". (8.50" L ) BRACE - Channel, "105". "125" and "1 35". (16.0" L.) BRACE - Channel, "105". "125" and "135". (16.0"L ) BRACE - Channel, "105". "125" and "135". (6.25"L ) BRACE - Channel, "105". "125" and "135". (6.25"L ) STRUT - Drag, No. 1 WASHER WASHER BUSHING - Insert FITTING - Attachment. brace tube FllTlNG - Attachment, brace tube FITTING ASSEMBLY - Drag wire pull, front and rear spar No. 1 drag strut, right, rear spar No. 2 drag strut, left FITTING ASSEMBLY - Drag wire pull, rear spar, No. 2 drag strut. left and right WASHER - Square FITTING CLEVIS NIPPLE FllTlNG ASSEMBLY - Drag wire pull, front spar, No. 2 drag strut, left FrlTlNG ASSEMBLY - Drag wire pull. front spar. No. 2 drag strut, left and right A - Used on PA-18 "95" airplanes with serial numbers 18-1 and up. Used on PA-18 and 18A "105". "125" and "135" airplanes with serial numbers 18-1 to 18-3770 inclusive, 18-3772to 18-3780inclusive. B - Used when fuel tank is installed in right wing. WlNG PANEL ASSEMBLY. UNCOVERED (Showing Trailing Edge) (See Code "A") When ordering, always specify Pan Number, Description and Serial Number of Aircraft REVISED: NOVEMBER 1980 182 WING PANEL ASSEMBLY, UNCOVERED (Showing Trailing Edge) (See Code "A") SECTION I Wing Group -Figure and Index Numbel Part Number IPIPER PARTS CATALOG = , I NOMENCLATURE A - Used on PA-18 "95" airplanes with serial numbers 18-1 and up. Used on PA-18 and PA-18A "1 05". "125" and "1 35" airplanes with serial numbers 18-1 to 18-3770 inclusive, 18-3772 to 18-3780 inclusive. 8 - Used when fuel tank is installed in right wing. . B B When ordering, always specify Part Number, Description and Serial Nu1 WASHER - Square FIllING 'CLEVIS 'NIPPLE STRUT ASSEMBLY - Drag. No. 2 and No. 3 FITTING ASSEMBLY - Drag wire pull, front and rear spar No. 2 drag strut. right, front and rear spar No. 3 drag strut. left and right FITTING ASSEMBLY - Drag wire pull, front and rear spar No. 3 drag strut, left and right WASHER - Square FITTING CLEVIS NIPPLE FllllNG ASSEMBLY - Drag wire pull, "N" brace, front and rear spar. No. 4 drag strut WASHER - Square NIPPLE CLEVIS FITTING - Wire pull TUBE ASSEMBLY - Drag strut, upper 'W" TUBE - Drag strut, "N" brace TUBE ASSEMBLY - Drag strut. lower "N" FllllNG ASSEMBLY - Drag wire pull. front and rear spar, No. 5 drag strut 'WASHER - Square FITTING -Wire pull CLEVIS NIPPLE WlRE - Drag, No. 2 and No. 3 bay, left and right, No. 1 bay, right, 44.875" L (2 per bay) WIRE - Drag, No. 2 and No. 3 bay, left and right, 44.875" L (2 per bay) WlRE - Drag, No. 4 bay, left and right, 56.25" L (2 per bay) ANGLE - Rear spar ANGLE - Front spar FITTING - Front and rear spar, Jury strut BLOCK - Filler, rear spar BLOCK - Filler, front spar BRACKn - Airspeed, "1 35" REVISED: NOVEMBER 1980 1 B 3 No. Rw. 1 1 1 1 4 6 4 2 1 2 2 4 2 2 2 1 2 2 2 4 1 1 1 1 10 8 4 2 2 4 2 2 1 I ber SERIAL NUMBERS AFFECTED 18-1810 and up of Aircraft SECTION l Wing Group WING PANEL ASSEMBLY, UNCOVERED (Showing Trailing Edge) (See Code "A7 Figure Number 5-49 11061-00 10531-00 IPIPER PARTS CATALOG -m"Ode I NOMENCLATURE BRACKET ASSEMBLY - Pulley CLIP - Navigation light wire FORMER - Fabric, "N" brace assembly, "95". "105". "125" and "135". left FORMER - Fabric, "N" brace assembly. "95". "105". "1 25" and "1 35", right BUSHING - Insert. pulley PLATE - Lock STRUT ASSEMBLY - Drag, No. 5 BRACE - Channel (11" L) BRACE - Channel (17" L.), right RIB ASSEMBLY - No. 1 butt. "105". "1 25" and "135". left RIB ASSEMBLY r No. 1 butt. "105". "1 25" and "1 35". right RIB ASSEMBLY - No. 1 butt, "105" and "125". right RIB ASSEMBLY - No. 2. "105". "1 25" and "135". left RIB ASSEMBLY - No. 2, "105" and "125". right RIB ASSEMBLY - No. 2, "105". "125" and "135". right RIB ASSEMBLY - No. 3, "105". "125" and "135". left RIB ASSEMBLY - No. 3. "105" and "125". right RIB ASSEMBLY - No. 3, "105". "125" and "135". right RIB ASSEMBLY - No. 4, "105". "1 25" and "1 35". left and righ RIB ASSEMBLY - No. 5, "105". "1 25" and "135". left RIB ASSEMBLY - No. 5, "105". "125" and "135". right RIB ASSEMBLY - Nos. 6. 7. 8, 10 and 11, "95". "105". "125' and "1 35". left and right RIB ASSEMBLY - No. 9, "95". "105". "1 25" and "1 35". left and right RIB ASSEMBLY - No. 12, "95". "105". "125" and "135". left RIB ASSEMBLY - No. 12, "95". "105". "1 25" and "1 35". righ RIB ASSEMBLY - No. 13, tip, "95". "105". "125" and "135". lei RIB ASSEMBLY - No. 13, tip, "95". "105: "1 25" and "1 35" right RIB - Nose, tip, left RIB - Nose, tip, right RIB ASSEMBLY - Nose. (8) left. (10) right RIB ASSEMBLY - Nose, left and right RIB ASSEMBLY - Nose. special, No. 1 and No. 2, left RIB ASSEMBLY - Nose, special, No. 1 and No. 2, left and righ RIB ASSEMBLY - Nose, left and right SPAR ASSEMBLY - Front "95". "105". "1 25" and "1 35". left SPAR ASSEMBLY - Front, "95". "105". "1 25" and "1 35". rigf A - Used on PA-18 "95" airplanes with serial numbers 18-1 and up. Used on PA-18 and PA-18A "105". "125" and "1 35" airplanes with serial numbers 18-1 to 18-3770 inclusive, 18-3772 to 18-3780 inclusive. B - Used only when fuel tank is not installed in right wing. SERIAL NUMBERS AFFECTED When ordering, always specify Part Number. Description and Serial Number of Aircraft REVISED: NOVEMBER 1980 PA-18 SECTION I Wing Group SERIAL NUMBERS AFFECTED WING PANEL (Showing Figure and Index Number 5-71 -72 -73 -74 -75 -76 -77 -78 -79 -80 -81 - 82 -83 .. -84 -85 - 86 18-1 to 18-468 inclusive 18-469 and up UNCOVERED (See Code "A") Code B B B B C C B B B When ASSEMBLY. Trailing Edge) Part Number 14453-02 14453-03 14453-04 14453-05 13171-00 13171-00 11151-02 15211-00 15773-00 10634-04 10908-03 10634-08 10635-00 13052-02 10635-00 10653-00 10907-00 10653-06 13052-02 13042-00 13042-01 12252-02 12252-02 12252-03 12252-04 12252-03 12252-03 12252-08 12252-06 12252-06 10633-00 10633-05 10633-05 f Aircraft REVISED: NOVEMBER 1980 185 PIPER PARTS CATALOG NOMENCLATURE SPAR - Rear, "95". left SPAR - Rear. "95". right SPAR - Rear. "105". "125" and "135". left SPAR - Rear, "105". "125" and "135". right GUSSET - False spar GUSSET - False spar PLATE - "U" fairlead retainer BRACE - Wing rib TRAILING EDGE - "95" RIB ASSEMBLY - No. 1, "95". left RIB ASSEMBLY - No. 1, "95". right RIB ASSEMBLY - No. 1. "95". r~ght RIB ASSEMBLY - No. 2, "95". left RIB ASSEMBLY - No. 2, "95". right RIB ASSEMBLY - No. 2, "95". r ~ g h t RIB ASSEMBLY - No. 3, "95". left RIB ASSEMBLY - No. 3, "95". right RIB ASSEMBLY - No. 3. "95". right RIB ASSEMBLY - No. 4, "95". left and right RIB ASSEMBLY - No. 5, "95", left RIB ASSEMBLY - No. 5. "95". right BRACE - Channel. "95". (8.50 L.) BRACE - Channel, "95". (8.50" L.) BRACE - Channel, "95". (16 . 0 L) BRACE - Channel. "95". (17.0" L) BRACE - Channel. "95". (16.0" L.) BRACE - Channel, "95". (16.0" L) BRACE - Channel, "95". (13.75" L.) BRACE - Channel. "95". (6.25" L.) BRACE - Channel, "95". (6.25" L.) PLATE ASSEMBLY - Tank cover support, left PLATE ASSEMBLY - Tank cover support, left PLATE ASSEMBLY - Tank cover support, right A - Used on PA-18 "95" airplanes with serial numbers 18-1 and up. Used on PA-18 and PA-18A "105". "125" and "1 35" airplanes with serial numbers 18-1 to 18-3770 inclusive, 18-3772 to 18-3780 ~nclusive. B - Used when fuel tank is installed in right wing. C - Ascertain part length and order accordingly. ordering, always spec~fyPart Number. Descr~pt~on and Serial No. Req 1 1 1 1 4 2 4 AR 2 1 1 1 1 1 1 1 1 1 2 1 1 9 6 8 8 13 10 4 5 6 1 1 1 Number PIPER PARTS CATALOG F~gure6 . Wing Panel Assembly. Uncovered (Showing Trailing Edge) (PA-18 "135" and "1 50" - Ser~alNos. 18-3771, 18-3781 and up) REVISED. NOVEMBER 1980 SECTION I Wing Group WING PANEL ASSEMBLY, UNCOVERED (Showing Trailing Edge) (See Code "A") Figure I I PIPER PARTS CATALOG SPAR - False, flap inboard, "1 35" and "1 50". left SPAR - False, flap inboard, "1 35' and "1 50". right SPAR - False, flap outboard, "1 35" and "1 50". left SPAR - False. flap outboard. "135" and "150". right SPAR - False, aileron inboard, "1 35" and "150. left SPAR - False, aileron inboard. "135" and "1 5 0 , right SPAR - False. aileron outboard. "135" and "1 50". left SPAR - False, aileron outobard "1 35" and "1 50". right BRACE - Channel (8.5" L.) BRACE - Channel (16.0" L) BRACE - Channel (6.25" L.) STRUT - Drag, No. 1 WASHER BUSHING - Insert FllTlNG - Anachment, brace tube. FllTlNG ASSEMBLY - Drag wire pull. rear spar, No. 2 drag 'WASHER - Square ' FITTING CLEVIS NIPPLE FllTlNG ASSEMBLY - Drag wire pull, front spar. No. 2 drag 'WASHER - Square ' FITTING ' CLEVIS NIPPLE STRUT ASSEMBLY - Drag. No. 2 and No. 3 FIlTING ASSEMBLY - Drag wire pull. front and rear spar, No. 3 drag strut WASHER - Square ' FITTING * CLEVIS ' NIPPLE FllTlNG ASSEMBLY - Drag wire pull, "N" brace, front and rear spar. No. 4 drag strut 'WASHER - Square ' NIPPLE CLEVIS * FITTING TUBE ASSEMBLY - Drag strut. upper "N" TUBE - Drag strut, "N" brace TUBE ASSEMBLY - Drag strut, lower "N" FITTING ASSEMBLY - Drag wire pull, front and rear spar. No. 5 drag strut WASHER - Square FITTING - Wire pull ' CLEVIS NIPPLE WIRE - Drag, No. 2 and No. 3 bay (44.875" L.) WlRE - Drag, No. 4 bay (56.25" L) ANGLE - Rear spar and Index Number 6- A - Used on PA- 18 "1 35" and "1 5 0 airplanes with serial numbers 18-3771, 18-3781 and up. N::?m 1 Code 14394 When ordering, always spec~fyPart Number. Description and Serial Number of Aircraft 150" strut strut NOMENCLATURE DRAWING - Wing Panel Assembly. Uncovered "1 35" and " REVISED: NOVEMBER 1980 No. Req. 1 1 1 1 1 1 1 1 8 16 2 2 2 6 2 2 1 1 1 1 2 1 1 1 1 4 4 2 1 2 2 4 2 2 2 1 2 2 2 4 1 1 1 1 8 4 2 SERIAL NUMBER AFFECTED WING PANEL ASSEMBLY, UNCOVERED (Showing Trailing Edge) (See Code "A") SECTION I Wing Group Figure and Index Number -6-44 -45 -46 -47 -48 -49 -50 -51 -52 -53 - 54 -55 -56 -57 -58 -59 - 60 -61 -62 -63 - 64 -65 -66 - 67 -68 -69 - 70 -71 -72 -73 -74 -75 Part Number 14361-03 12581-00 14371-02 14371-03 11580-00 10644-00 11061-00 10531-04 10531-05 80012-03 10151-00 14222-00 12252-05 10634-05 10634-07 10635-02 10653-02 10653-05 13052-07 13052-10 13052-09 13042-02 13042-03 13022-10 13022-11 13022-09 13022-02 12902-00 12902-01 10742-02 10742-03 16192-00 16192-01 15831-02 15831-05 14391-02 14391-03 14392-02 14392-03 13171-00 11151-02 12331-02 7 PIPER PARTS CATALOG Code I NOMENCLATURE ANGLE - Front spar FriTlNG - Front and rear spar, Jury strut BLOCK - Filler, rear spar BLOCK - Filler, front spar BRACKET - Airspeed, "1 35" and "1 50". left BRACKET ASSEMBLY - Pulley CLIP - Navigation light wire FORMER - Fabric, "N" brace assembly, left FORMER - Fabric, "N" brace assembly, right BUSHING - Insert, pulley PLATE - Lock STRUT - Drag, No. 5 BRACE - Channel (11" L.) RIB ASSEMBLY - No. 1 bun, left RIB ASSEMBLY - No. 1 bun, right RIB ASSEMBLY - Nos. 2 and 3. left and right RIB ASSEMBLY - No. 4, left RIB ASSEMBLY - No. 4, right RIB ASSEMBLY - No. 5, left and right RIB ASSEMBLY - No. 6. left RIB ASSEMBLY - No. 6, right RIB ASSEMBLY - No. 7, left RIB ASSEMBLY - No. 7, right RIB ASSEMBLY - No. 8, left and right RIB ASSEMBLY - Nos. 9 and 12. left and right RIB ASSEMBLY - No. 11, left and right RIB ASSEMBLY - Nos. 10, 13 and 14, left and right RIB ASSEMBLY - No. 15, left RIB ASSEMBLY - No. 15, right RIB ASSEMBLY - No. 16, tip. left RIB ASSEMBLY - No. 16, tip. right RIB - Nose, tip, left RIB - Nose, tip, right RIB ASSEMBLY - Nose, left and right RIB ASSEMBLY - Nose, No. 6, left and right SPAR ASSEMBLY - Front, left SPAR ASSEMBLY - Front, right SPAR ASSEMBLY - Rear, left SPAR ASSEMBLY - Rear, right GUSSET - False, spar PLATE - "U", fairlead retainer PLATE - Bun rib and leading edge attachment BRACE - Wing rib When ordering, always specify Pan Number, Description and Serial Number of Aircraft REVISED: NOVEMBER 1980 168 a PIPER PARTS CATALOG REVISED: SEPTEMBER 1978 Figure 6A. Flap Assembly (PA-18-1 5 0 Serial Nos. 18-7809001 and up) SECTION I Wing Group Figure and Index Number 6A- 1 -2 -3 -4 -4a -5 -6 -7 -8 -9 -10 -1 1 -12 -13 -14 Part Number Code - -PIPER PARTS CATALOG NOMENCLATURE FLAP ASSEMBLY - Left FLAP ASSEMBLY - Right SPAR ASSEMBLY - Flap, left (complete) SPAR ASSEMBLY - Flap, right (complete) BULKHEAD - Flap, left BULKHEAD - Flap, right BULKHEAD - Flap, left BULKHEAD - Flap, right BULKHEAD - Flap, left BULKHEAD - Flap. r ~ g h t RIB - Flap RIB - Flap HINGE ASSEMBLY - Flap, inboard HINGE ASSEMBLY - Flap, outboard BULKHEAD - Flap, left BULKHEAD - Flap, right SKlN - Flap, leading edge SKlN - Flap, leading edge inboard, left SKIN - Flap, leading edge inboard. right SKIN - Flap, leading edge, outboard, left SKIN - Flap. leading edge, outboard, right SKlN - Flap, trailing edge. top, left SKlN - Flap, trailing edge, top, right SKlN - Flap, trailing edge, bottom, left SKlN - Flap, trailing edge. bottom, right REINFORCEMENT - Trailing edge When ordering, always specify Part Number, Description and Serial Number of Aircraft REVISED: SEPTEMBER 1978 1910 PIPER PARTS CATALOG REVISED: SEPTEMBER 1978 Figure 66. Aileron A s s e m b l y (PA-18-150 Serial Nos. 18-7809001 and up) SECTION I Wing Group AILERON ASSEMBLY - PA-18-150 (Serial Nos. 18-7809001 and up) Figure I I I PIPER PARTS CATALOG and Part Index / Number I Code INumber NOMENCLATURE AILERON ASSEMBLY - Left AILERON ASSEMBLY - Right SPAR ASSEMBLY - Left (complete) SPAR ASSEMBLY - R i e t (complete) BULKHEAD - Flap, left BULKHEAD - lap, right BULKHEAD - Flap, left BULKHEAD - Flap. right RIB - Aileron RIB - Aileron RIB - Aileron RIB - Aileron HINGE ASSEMBLY - Aileron HINGE ASSEMBLY - Aileron. center HORN ASSEMBLY - Aileron BULKHEAD - Aileron, left BULKHEAD - Aileron, right SKlN - Aileron, inboard, left SKlN - Aileron, inboard. right SKlN - Aileron, center, inboard. left SKlN - Aileron, center, inboard, right SKlN - Aileron, center, outboard, left SKlN - Aileron, center, outboard. right SKlN - Aileron, outboard. left SKlN - Aileron, outboard. right SKlN - Aileron, trailing edge. inboard, top, left SKlN - Aileron, trailing edge, inboard, top, right SKlN - Aileron, trailing edge, inboard, bottom, left SKlN - Aileron, trailing edge, inboard, bottom, right SKlN - Aileron, trailing edge, outboard, top, left SKlN - Aileron. trailing edge, outboard, top, right SKlN - Aileron, trailing edge, outboard. bottom, left SKlN - Aileron, trailing edge, outboard, bottom, right WEIGHT - Aileron balance TAB - Aileron trim REINFORCEMENT - Trailing edge When ordering, always specify Part Number, Description and Serial Number of Aircraft REVISED: SEPTEMBER 1978 1812 a PIPER PARTS CATALOG REVISED: NOVEMBER 1981 Figure 7. Strut Installation 1813 STRUT INSTALLATION SECTION I Wing Group Figure and Index Number -7- 1 Part Number IPIPER PARTS CATALOG Code I NOMENCLATURE STRUT - Jury, front (with pitot tube) "95". "105" and "1 25". LH STRUT - Jury, front. "1 35" and "1 50". LH STRUT - Jury. front, RH STRUT - Jury, rear BOLT - (AN3-4A) WASHER - (AN960-10) NUT - (Elastic Stop Nut No. 22M02) TUBE - Jury strut spacer CLAMP ASSEMBLY - Front jury strut CLAMP - Rear jury strut RING - Snap, cable fairlead FAIRLEAD - Cable, segment CLAMP - Jury strut HOUSING ASSEMBLY - Pulley, LH HOUSING ASSEMBLY - Pulley, RH BRACKET ASSEMBLY - Tie down BUSHING - Spacer STRUT ASSEMBLY - Lift front FORK ASSEMBLY BOLT - Lift strut attachment NUT - (AN320-6) PIN - Cotter (AN380-3-3) STRUT ASSEMBLY - Rear lift FORK ASSEMBLY BOLT - (AN5-14A) WASHER - (AN960-516) NUT - (42E054) BOLT - Lift strut attachment NUT - (AN320-6) PIN - Cotter (AN380-3-3) BOLT - (AN5-27A) NUT - (Elastic Stop Nut No. 42E054) DECAL - No Step When ordering. always specify Part Number, Description and Serial Number of Aircraft REVISED: NOVEMBER 1981 1814 PIPER PARTS CATALOG REVISED N O V E M B E R 1980 Flgure 8. Covered Fuselage Assembly, Left View 1 B 1 5 SECTION II Furelage G r w p COVERED FUSELAGE ASSEMBLY Figure and Index Number Part Number 12545 13255 12552 13264 14486 14836 751 730 751 737 751 736 751 738 751 743 751 744 751 745 751 756 751 754 751 755 751 765 751 766 754 825 458 110 458 112 12761-02 12761-02 12761-02 60571-00 60571-01 60742-00 60742-01 64835-00 6483541 82461-00 82461-00 I NOMENCLATURE DRAWING - Fuselage Assembly, Complete DRAWING - F u s e l e Assembly, Complete DRAWING - Fabric Installation, F u s e l ~ DRAWING - Fabric Installation, Fuseloge DRAWING - Fuselage Assembly,Compbte I I DRAWING - Fabric or Cemnite Installation, Fuselage FUSELAGE ASSEMBLY - Fabric covered (with sent and floor) "95" FUSELAGE ASSEMBLY - Fabric covered (with seat and floor) "105" FUSELAGE ASSEMBLY - Fabric covered (with seat and floor) "95" FUSELAGE ASSEMBLY - Fabric cavered (with seat and floor) "125" FUSELAGE ASSEMBLY - Fabric covered (with seat a d floor) "135" FUSELAGE ASSEMBLY - Fabric cwered (with seat and floor) "125" FUSELAGE ASSEMBLY - Fabric covemd (with seat and floor) "135" FUSELAGE ASSEMBLY - Fabric cowred (with seat end floor) "95" FUSELAGE ASSEMBLY - Fabric covered (with seat and floor) "135" IFUSELAGE ASSEMBLY - Fabric covered (with seat and floor) "135" IFUSELAGE ASSEMBLY - Fabric covared (with reat and floor) " 1 3 5 and "150" IFUSELAGE ASSEMBLY - FOric canred (with seat and floor) "135" and "15U' FUSELAGE ASSEMBLY - Ceconite cowred (with seat end floor) "150" ENVELOPE - Fuselage. ceconite ENVELOPE - Vertical stabilizer, ceconite COVER - Inspection COVER - Inspection (battery drain COVER - Inspection round, duster indicator installation COVER -Stabilizer yoke inspaction, LH COVER - Stabilizer yoke inspection, RH PANEL -Tail inspection, LH PANEL -Tail inspection, RH PANEL -Tail inspection, LH PANEL - Tail inspection, RH COVER -Inspection, rectangular COVER - Inspection, rectangular A - Used on PA-18 airplanes with serial numben 18-1 to 18-3770 inclusive, 183772 to 18-3780 inclusive. %.I SERIAL NUMBERS AFFECTED (PA-18A only) (PA-18 only) 18-1to 18-5294 (PA-18A only ) (PA-18 only) 18-3771, 18-3781 and up (PA-18 only) 18-5295and up 1 1 1 18-1 to 18-548 inclusive 18-549 to 18-3013 inclusive 1 1 1 (PA-18 only) 18-1810to 18-3013 (PA-18A only) 18-1215 to 18-1969 (PA-18A only) 18-1812 to 18-3013 I 1 118-3014 and up 1 l1 (PA-18 only) 18-3014 to 18-3770, 18-3772 to 18-3780 inclusiw (PA-18A only) 18-3014 to 18-3770, 18-3772 to 18-3785 inclusive I 1 ( (PA-18A only) 183771.18-3786 When ordering, always specify Part Numkr, Dasuiption end Serial Number of Aircraft 1 REVISED: JANUARY 1977 and up (PA-18 only) 18-3771.18-3781 to 188919 inclusive 18-8920 and up 18-8920 and up 18-8920 and up (PA-18 only) 18-2850, 18-2857 a d up (PA-18A only) 163640 and up 18-1to 18-7609115 inclusiw 18-1 to 18-7609115 inclusive 18-7609116 and up 18-7609116 and up (PA-18 only) (PA-18A only)