Skip to main content

Piper PA-18 Super Cub Checklist

Piper PA-18 Super Cub · Checklist

Free account — keep the POHs & checklists you reference in one place.

Overview

This document serves as a checklist for the Piper PA-18 Super Cub, providing pilots with essential procedures and safety checks necessary for flight operations. It is designed to ensure that all critical systems and components are inspected and verified before takeoff, enhancing safety and operational efficiency. The checklist is structured to guide pilots through preflight, engine start, takeoff, and landing procedures, ensuring that no critical steps are overlooked. This document is intended for use by pilots and aviation enthusiasts familiar with the Piper PA-18 Super Cub, offering a concise reference for routine operations.

  • Perform a thorough preflight inspection to ensure safety.
  • Follow the engine start procedure carefully to avoid damage.
  • Verify all systems are operational before takeoff.
  • Check landing gear and flaps settings before landing.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

Document

Source

Copy found at www.spruemaster.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

Report a problem or request removal

Document details

Type
·
Checklist
Pages
·
56
File size
·
22 MB
Copy found at
·
www.spruemaster.com
About this document
What is the Piper PA-18 Super Cub Checklist?

The Piper PA-18 Super Cub Checklist is a checklist for the Piper PA-18 Super Cub.

How many pages is the Piper PA-18 Super Cub Checklist?

The copy of the Piper PA-18 Super Cub Checklist on file runs 56 pages.

How rare is it?
4,798Piper PA-18 Super Cub registered worldwide · 4,781 active

Common. One of the most common aircraft types we track.

Documentation completeness
7/7

Full essential library on file for the Piper PA-18 Super Cub.

More Piper PA-18 Super Cubmanuals & documents

See all 29 →

In this document

Preflight Inspection

The Preflight Inspection section outlines the necessary checks to be performed before flight. This includes verifying fuel levels, oil levels, and the condition of control surfaces. Pilots are advised to check for any visible damage and ensure that all required documents are on board.

Engine Start Procedure

This section details the steps for starting the engine safely. It includes checking the throttle position, ensuring the mixture is set correctly, and verifying that the ignition switch is in the correct position before engaging the starter.

Before Takeoff

The Before Takeoff section emphasizes the importance of conducting a final check of the aircraft systems. This includes verifying that the flaps are set correctly, the fuel selector is in the proper position, and that the flight controls are free and correct.

Landing Checklist

The Landing Checklist provides a series of steps to prepare the aircraft for landing. This includes checking the landing gear position, ensuring the flaps are set for landing, and confirming that the approach speed is appropriate for the conditions.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Safety notes

  • Always ensure the aircraft is on a level surface during preflight checks.
  • Never start the engine without confirming the area is clear of personnel.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.