Exhaust Systems Engine Mounts Carb Air Boxes Shrouds Seats Piston Turbine Radial Vintage And More...
Piper PA-32R Saratoga II HP · Systems Description
Overview
This document provides maintenance information specifically for the Piper PA-32R-301 Saratoga II HP and related models. It focuses on the inspection and servicing of the aircraft's exhaust system components, including mufflers, shrouds, and tailpipes. The document outlines part numbers and descriptions for various components, ensuring that maintenance personnel can identify and procure the correct parts for service. It emphasizes the importance of inspecting the muffler for damage and ensuring that all components are serviceable to maintain the aircraft's performance and safety.
- Inspect muffler for blisters or bulges under heat shroud.
- Part number 26345-008 Muffler is shorter for increased clearance.
- Mufflers from Acorn Welding have an internal bail to prevent outlet blockage.
- Inspect collector for heat distortion and black flaking material.
- Ensure all components are serviceable for safety and performance.
Document
Source
Originally published by www.acornwelding.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Systems Description
- Year
- 2010
- Pages
- 1
- File size
- 142 KB
- Publisher
- www.acornwelding.com
Most owners only have the POH. Here's the essential set for the Piper PA-32R Saratoga II HP.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
More Piper PA-32R Saratoga II HPmanuals & documents
- SERVICE LETTER NO. 1331Service Manual
- Weight & Balance, Performance CalculationWeight And Balance
- Piper Aircraft PA-32R-301/301T Maintenance ManualPilot's Operating Handbook
- Specifications/Performance Standard Equipment Saratoga/Turbo Saratoga PA 32-301/301TSpecifications
- Piper Saratoga PA-32R-301T Normal and Emergency ChecklistsEmergency Procedures
- Performance Data for the Piper PA-32R Saratoga II HPPerformance Data
- EMERGENCY PROCEDURESEmergency Procedures
- Emergency Procedures for the Piper PA-32R Saratoga II HPEmergency Procedures
- Performance Data for the Piper PA-32R Saratoga II HPPerformance Data
- Airworthiness Directives for the Piper PA-32R Saratoga II HPAirworthiness Directives
In this document
Muffler Inspection
The document details the inspection process for the muffler, highlighting the need to check for blisters or bulges under the heat shroud. It also instructs to inspect the collector near the ball joint for heat distortion and black flaking material, which could indicate damage.
Part Numbers and Descriptions
A comprehensive list of part numbers and descriptions is provided for various exhaust system components. This includes mufflers, shrouds, stacks, risers, tailpipes, and clamps, allowing for easy identification and ordering of parts.
Special Notes on Muffler
It is noted that mufflers purchased from Acorn Welding come with an internal bail to prevent outlet blockage. Additionally, part number 26345-008 is specified as being shorter to increase clearance between the muffler and mount, with a recommendation to measure the length between shroud rings before ordering.
Safety notes
- Ensure proper inspection of exhaust components to prevent potential failures.
Full document text
This muffler requires flame cones that are still attached to be serviceable. Inspect muffler for blisters or bulges under heat shroud. Inspect collector just before the ball joint for heat distortion and black flaking material. Item Part Number Description 26345- 05 MUFFLER 26345-008 MUFFLER 24862-026 SHROUD 24862-010 SHROUD 24862-020 SHROUD 85233-010 STACK RIGHT HAND CENTER 85233-004 STACK LEFT HAND CENTER 85233-006 RISER FRONT 85233-008 RISER REAR 24787-005 TAILPIPE RIGHT HAND 24787-004 TAILPIPE LEFT HAND 24788-000 TAILPIPE CLAMP 77611 GASKET 114-250 SPRING KIT 38080-022 INDUCTION AIR BOX 38729-019 ENGINE MOUNT SB1092 J-9613-19/12 SHOCK MOUNT (2 EACH) 0 1 A B C D 2 3 4 5 6 7 8 - - - - - (SN: 3246001 AND ON) (SN: 3246001 AND ON) Mufflers purchased at Acorn Welding have an internal bail to prevent outlet blockage. Note: Part number 26345-008 Muffler is shorter to increase clearance between the muffler and mount. Measure lenght between shroud rings before ordering part. 1 2 3 4 5 6 4 8 7 1 8 5 A B C D PIPER PA-32R-301 Saratoga II HP With Lycoming IO-540-K165D Engine SN 3213042 and on 3246001 and on Piper PA-32-301 FT Piper 6x SN 3232001 and on (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com ©2010 Acorn Welding Ltd. Exhaust Systems Engine Mounts Carb Air Boxes Shrouds Seats Piston Turbine Radial Vintage And More... L E L N E C C E X E