S-9 Chaos Text Manual
RANS S-9 Chaos · Maintenance Manual
Overview
This document provides maintenance instructions for the RANS S-9 Chaos aircraft, specifically detailing the fuel cap assembly process. It includes step-by-step guidance on removing and reassembling components related to the fuel cap.
- Instructions for removing the rubber gasket and plastic baffle from the fuel cap.
- Details on drilling a hole in the plastic baffle.
- Guidance on assembling the bead chain to the retainer sleeve.
- Steps to ensure the rubber gasket is reinstalled correctly.
- Instructions for installing the bead chain end coupling.
- Includes a reference to a figure for visual guidance.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
Document
Source
Copy found at skycraft.ltd. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Maintenance Manual
- Year ·
- 2013
- File size ·
- 5.3 MB
- Copy found at ·
- skycraft.ltd
- Language ·
- en
What is the S-9 Chaos Text Manual?
The S-9 Chaos Text Manual is a maintenance manual for the RANS S-9 Chaos, dated 2013.
What year was the S-9 Chaos Text Manual published?
The S-9 Chaos Text Manual — the RANS S-9 Chaos maintenance manual on file — is dated 2013.
Common. More common than 65% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the RANS S-9 Chaos.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
RANS S-9 Chaos for sale now
Free — save the S-9 to your watchlist and track it in one place.
Related documents
- INSTALLATION GUIDE REPLACEMENT OF FUEL FILLER CAP WASHERBeechcraft 58TC Baron · Maintenance Manual
- SERVICE BULLETIN SB 61-3806Beechcraft G58 Baron · Service Bulletins
- Piper PA-28 Main Gear Fairing Installation and Maintenance ManualPiper PA-28 Dakota · Supplemental Type Certificate
- Instructions for Continued AirworthinessCESSNA 170B · Systems Description
- SERVICE BULLETIN - ICON AircraftICON A5 · Service Bulletins
If you fly the RANS S-9 Chaos, you may also be researching these.
In this document
Fuel Cap Assembly
The section outlines the procedure for removing and reassembling the fuel cap components, including the rubber gasket and plastic baffle.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Full document text
01-01 MSW 04x001wg.doc 02/06/2013 FUEL CAP ASSEMBLY 1. Remove the Rubber Gasket and Plastic Baffle from the Fuel Cap. The Plastic Baffle will “snap” out of the Fuel Cap. A screwdriver works well for the removal. Locate and drill a #30 hole, 1/4” from the center of the plastic baffle. Refer to FIGURE 01-01. Drill through the Plastic Baffle and Rubber Gasket. Deburr. Detach the Rubber Gasket from the Baffle. Note the orientation of the Rubber Gasket. Assemble the Bead Chain to the Bead Chain Retainer Sleeve. Install the Bead Chain and Retainer Sleeve through the topside of the Baffle and pull tight. Push the Chain though the drilled hole in the Rubber Gasket. Re-install the Rubber Gasket to the Baffle. Be sure the Chain is pulled tight. “Snap” the Rubber Gasket and Baffle back into the Fuel Cap. Install the Bead Chain End Coupling onto the Bead Chain. Find the center of the Plastic Retainer and drill a #30 hole. Using the 1/8” Small Brass Washer, rivet the Plastic Retainer to the Bead Chain End Coupling. FIGURE 01-01