CHECKLISTE

Scheibe SF-25C Falke · Checklist

Free account — keep the POHs & checklists you reference in one place.

Overview

This document is a checklist for the Scheibe SF-25C Falke aircraft, detailing pre-flight, in-flight, and post-flight procedures. It includes steps for cockpit preparation, engine start, takeoff, and landing operations.

Checklist includes cockpit and exterior checks.
Engine start requires specific RPM settings.
Takeoff speed is between 70-75 km/h.
Climb speed is between 90-100 km/h.
Best glide speed is 90 km/h.
Lowest sink rate speed is 75 km/h.
Post-landing procedures are outlined.
Transponder settings are included.

Document

Source

Originally published by flugschule.st. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

View original at flugschule.st

Report a problem or request removal

Document details

Type: Checklist
File size: 16 KB
Publisher: flugschule.st
Language: de

About this document

What is the CHECKLISTE?

The CHECKLISTE is a checklist for the Scheibe SF-25C Falke.

Where does the CHECKLISTE come from?

This copy of the CHECKLISTE was originally published by flugschule.st and is hosted on Sprinkle as a free, searchable reference copy.

Documentation completeness

1/7

Most owners only have the POH. Here's the essential set for the Scheibe SF-25C Falke.

Pilot's Operating Handbook / AFM
Checklist
Maintenance Manual
Parts Catalog (IPC)
Systems & Wiring
Service Bulletins on file
Type Certificate (TCDS)

More Scheibe SF-25C Falkemanuals & documents

Flughandbuch SF25CPilot's Operating Handbook

In this document

Cockpit Preparation

Includes checks for main switch, fuel supply, ignition, and crash transmitter.

Exterior Check

Covers checks for control surfaces, air intakes, and overall aircraft condition.

Engine Start

Details the steps for starting the engine, including RPM checks and warm-up procedures.

Takeoff and Climb

Specifies speeds for takeoff and climb, along with engine settings.

In-Flight Procedures

Includes steps for gliding and engine management during flight.

Post-Flight Procedures

Outlines steps for shutting down the aircraft after landing.

Safety notes

Ensure all safety checks are completed before flight.
Monitor engine RPM and temperatures during operation.
Use caution when starting the engine; limit starter engagement to 10 seconds.
Verify that the cabin hood is locked before takeoff.
Check that the parking brake is engaged before starting the engine.

Full document text

CHECKLISTE SF 25c "Falke" OE-9148 STEIRISCHE FLUGSPORTUNION CHECKLISTE, SF 25 c, OE-9148 Cockpit Front 1. Hauptschalter...............................ein 2. Kraftstoffvorrat.......................geprüft 3. Hauptschalter..............................aus 4. Zündung......................................aus 5. Crashsender........................."ARMED" 6. Fremdkörperkontrolle..................... 1. Luftschraube........ .....Kerben, Risse 2. Spinner.....................Verschraubung 3. Motoröl (Shell-Rotella).......überprüft 5. Lufteintrittsöffnungen...................frei 6. Cowling, Verschlüsse.................fest 1. Hauptrad..........Rutschmarke, Druck 2. re. Rumpf-Holm Verkleidung............ 3. re. Tragfläche, Bespannung............. 4. re. Stützrad........Befestigung, Druck 5. re. Querruder..................................... 6. re. Bremsklappe................................ 7. re. Rumpfseite........Wölbungen, etc. R ch ee t e tS i e AUSSENCHECK 1. Höhenleitwerk.....................gesichert 2. Seitenleitwerk.....................überprüft 3. Staurohr......................................frei 4. Spornrad.............................überprüft 5. Staurohr-Entwässerung (Schauloch) iL nke e tS i e 1. li. Rumpfseite............Wellen, Risse? 2 . ACL....................................überprüft 4. Wasserabscheider............2sek. / zu 5. li. Rumpf-Holm Verkleidung............. 6. li. Bremsklappe................................ 7. li. Querruder..................................... 8. li. Tragfläche, Bespannung.............. 9. li. Stützrad..........Befestigung, Druck H cke CHECKLISTE, SF 25 c, OE-9148 6. Brandhahn.......................................auf 7. Kühlluftklappe..................................auf 8. Hauptschalter...................................ein 9. Vergaservorwärmung......................kalt 10. ACL..................................................ein 11. Choker...............................nach Bedarf 12. Gashebel........................... 13. Zündung...........................................ein 14. Luftschraubenbereich......................frei 15. Starter...............................max. 10 Sek. 16. Drehzahl...............................1000 RPM 17. Öldruck.........................check - 15 Sek. 18. Funk.................................................ein 19. Transponder............................... STBY 20. Amperemeter.............................geprüft 21. Warmlaufen.......................lt. Handbuch 22. ATIS.........................................abhören 23. Flugüberwachungsinstrumente..setzen nach Bedarf Anlassen: 1. Kabinenhaube.........................verriegelt 2. Gurte........................................angelegt 3. Alle Sicherungen..................geprüft - ein 4. Parkbremse............................verriegelt 5. Funk / Transponder.........................aus 1. Bremse....................................... prüfen 2. Spornradsteuerung.................... prüfen 3. Magnetkompass........................ prüfen 4. Trimmung.....................Start (ca. Mitte) 5. Ruderfreigängigkeit....................geprüft Rollen: ANLASSEN / ROLLEN CHECKLISTE, SF 25 c, OE-9148 1. Parkbremse................................verriegelt 2. 3. 4. Gashebel......................................Leerlauf 6. Amperemeter......................... kontrollieren 7. Transponder.................................. ALT Triebwerksinstrumente.......................grün Drehzahlprobe...............2600 - 2800 RPM 1. Abhebegeschwindigkeit.........70-75 Km/h 2. Steiggeschwindigkeit...........90-100 Km/h 3. in 50-80m / Grund...........Gas - 2600RPM 4. CHT/Öltemp......in grünem Bereich halten 1. Drehzahl..............2400 - 2800 RPM 2. Austrimmen nach Fluggeschwindigkeit 3. Kühlluftklappe............nach CHT/Öltemp. Vor dem Start: Start / Steigflug: Reiseflug: START/STEIGFLUG/REISEFLUG CHECKLISTE, SF 25 c, OE-9148 1. Gashebel ................................ zurücknehmen 2. Triebwerk ............LANGSAM - abkühlen lassen 3. Funk+Transponder .....................................aus 4. Zündung.....................................................aus 5. Propellerbremse..bei Bedarf (Prop. waagrecht) 8. Kühlluftklappe...............................................zu 9. Funk+Transponder......................................ein 1. Funk+Transponder....................................aus 2. Kühlluftklappe.............................................auf 3. Choke u. Gashebel. - siehe Anlassen am Boden 4. Zündung......................................................ein 5. Starterknopf........................................drücken 6. Funk+Transponder..................................... ein 7. Warmlaufen........................Vollgas vermeiden BESTE GLEITZAHL bei 90 Km/h GERINGSTES SINKEN bei 75 Km/h Abstellen im Flug: Anlassen im Flug: Segelflug: ABSTELLEN/ANLASSEN im Flug CHECKLISTE, SF 25 c, OE-9148 1. Vergaservorwärmung........ein (gezogen) 2. Anfluggeschwindigkeit........90-100 Km/h 1. Vergaservorwärmung......................AUS 2. Transponder................................... STBY 1. Parkbremse........................ verriegelt 2. Avionic Hauptschalter.................. aus 3. Drehzahl............................1000RPM 4. Zündung...................................... aus 5. ACL.............................................. aus 7. Hauptschalter...............................aus Landeanflug: Nach der Landung: Abstellen: LANDUNG/ABSTELLEN

All Scheibe SF-25C Falke checklist