Service Bulletin SNX-SB-001
SONEX Sonex A · Service Bulletins
Overview
This service bulletin provides instructions for the assembly and welding of the rudder pedal assembly for the Sonex A aircraft. It includes specifications for materials and dimensions necessary for the construction.
- Weld assembly using number 7 welding rod.
- Prime with Epoxy Chromate Primer or Powder Coat.
- Use 4130 steel tubes for construction.
- Includes specific dimensions for various components.
- Weld one side only for certain parts.
- Typical quantities for parts are specified.
Document
Source
Originally published by sonexaircraft.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Service Bulletins
- File size ·
- 35 KB
- Publisher ·
- sonexaircraft.com
- Language ·
- en
What is the Service Bulletin SNX-SB-001?
The Service Bulletin SNX-SB-001 is a service bulletins for the SONEX Sonex A.
Where does the Service Bulletin SNX-SB-001 come from?
This copy of the Service Bulletin SNX-SB-001 was originally published by sonexaircraft.com and is hosted on Sprinkle as a free, searchable reference copy.
Most owners only have the POH. Here's the essential set for the SONEX Sonex A.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
Related documents
- SERVICE BULLETIN NO. 1242APiper PA-32 Cherokee Six · Service Bulletins
- SERVICE BULLETIN #58KITFOX SERIES 7 · Service Bulletins
- Chapter 12: Rudder ControlsLANCAIR 235 · Maintenance Manual
- TECHNICAL SERVICE BULLETIN: 104750-000 Beechcraft Series 36 Autopilot Servo Update, Rev ABeechcraft G36 Bonanza · Service Bulletins
- SERVICE LETTER NUMBER 136: 3000/3450 NOSE BOX - FINGER TAB INSTALLATIONCESSNA A185F AMPHIBIAN · Service Bulletins
In this document
Rudder Pedal Assembly
Instructions for assembling the rudder pedal assembly using specified materials and welding techniques.
Materials
Details on the types of steel tubes and welding rods required for the assembly.
Dimensions
Specific measurements for various components of the rudder pedal assembly.
Full document text
sonex Service Bulletin Service Bulletin SNX-SB-001 Page 3 of 3 1 1/64" [25.8mm] 1 1/4" [31.8mm] 17 1/4" [438.1mm] 6 3/4" [171.4mm] 6 3/4" [171.4mm] 33" [838.2mm] 8 1/4" [209.6mm] 5 1/2" [139.7mm] 10 1/2" [266.7mm] SNX-C02-09 Rudder Pedal Assembly Weld Assembly together using number 7 welding rod Prime with Epoxy Chromate Primer or Powder Coat 5/8" x 5/8 x .049 Wall 4130 Square Tube Typical 4 places 3/4" x .035 Wall 4130 Steel Tube Typical 2 places 3/8" O.D. x 1/4" I.D x 7/8" [22.2mm] Long Bushing Stock 1" x .065 Wall 4130 Steel Tube Ring made from 1/8" diameter welding rod and skip welded to 1" diameter tube Note: weld one side only 5/16" O.D. x 3/16" I.D x 7/8" [22.2mm] Long Bushing Stock Typical 2 places