Aircraft Certification Service Organizational Realignment and Refinement References

U.S. DEPARTMENT OF TRANSPORTATION

ORDER

FEDERAL AVIATION ADMINISTRATION

8100.18A

National Policy

Effective Date:

09/29/2023

SUBJ: Aircraft Certification Service Organizational Realignment and Refinement

References

1. Purpose of this Order . This order provides information on using existing Aircraft

Certification Service (AIR) directives, advisory circulars (ACs), policy statements, policy

memorandums, technical standard orders (TSOs), and quality management system (QMS)

documents after AIR ’s 2023 refinement. This order is intended to maintain the continuity of current practices and does not establish new policy.

2. Audience . All FAA personnel, delegated organizations, and designees.

3. Where Can I Find This Order? You can find this order on the Federal Aviation

Administration (FAA) website at https://www.faa.gov/regulations policies/orders notices and on the Dynamic Regulatory System (DRS) website at https://drs.faa.gov .

4. What this Order Cancels . FAA Order 8100.18, Aircraft Certification Service

Organizational Realignment References , dated June 27, 2017.

5. Background. In the summer of 2017, AIR realigned from an organization in which

directorates were responsible for certain types of products (transport airplanes, small airplanes, rotorcraft, and engines and propellers) to an organization comprised of divisions responsible for specific safety functions. This was a first step toward realizing the 2017 Blueprint for AIR Transformation, with anticipated refinements expected. In subsequent years, each functional division underwent minor refinements to organizational structure.

a. On April 9, 2023, AIR further refined its organizational structure to align with the

original vision for AIR transformation and the Aircraft Certification Safety and Accountability Act of 2020. In this functionally aligned organization, many offices retained their roles and

responsibilities but were re-aligned within one of the new divisions and assigned a new

organizational identifier (code). In addition, new offices were created.

Distribution: Electronic Initiated By: AIR-600

09/29/2023 8100.18A

b. FAA Order 8100.5E, Aircraft Certification Service – Organizational Structure and

Functions , describes AIR’s functional divisions and staff offices , identified as: (1) Executive Staff Office, AIR - 1 0 .

(2) Senior Technical Experts Staff Office, AIR - 20 .

(3) International Office, AIR - 40 .

(4) Safety & Performance Integration (S&PI) Division, AIR - 300 .

(5) Integrated Certificate Management (ICM) Division , AIR - 5 00 .

(6) Policy & Standards (P&S) Division, AIR - 600 .

(7) Compliance & Airworthiness (C&A) Division, AIR - 700 .

(8) System Oversight (SO) Division, AIR - 800 .

(9) Enterprise Business Operations (EBO) Division, AIR - 900.

6. Using Policy , Guidance , and Standards after AIR’s 2023 refinement . If an existing

policy , guidance , or standard reference s the directorate structure, th e document remains applicable. This order contains information , specified in five appendices , to assist in using such documents in the functional divisions.

a. Appendix A contains organizational charts that depict how the organization is structured .

b. Appendix B contains a list of each office’s organizational code under the directorate -

based organization and their corresponding office code under the realigned and refined

organization.

c. Appendix C contains a list of AIR orders , ACs , policy statements, policy memo randums , TSOs, and QMS documents that were reviewed to evaluate the use of organizational titles as we continue to update documents for the transition to s functional organization . Documents listed in a ppendix C with bold text require additional clarification beyond what is provided in paragraph 6 (f) , which is provided in appendix D .

d. Appendix D provides additional clarification for AIR orders, ACs , policy statements, policy memo randums , TSOs, and QMS instructions listed in appendix C with bold text because they require additional clarification beyond what is provided in paragraph 6(f) .

e. Appendix E contains the information technology (IT) tools that were evaluated. New

organizational codes are being inte grated into the IT applications where appropriate . Continue to use these IT tools using the existing organizational codes if necessary and per IT system program manager guidance .

09/29/2023 8100.18A

f. For all documents in a ppendix C , until next revision or change to noted documents :

(1) Substitute any reference to an organizational code with the corresponding

organizational code in the functional division as defined in a ppendix B.

(2) All references to directorate or standards staff responsibilities not mentioned in

paragraphs ( 3 ) or (4) are replaced and understood to mean the P&S Division.

(3) All references to directorate product/ geographic areas of responsibility related to

Manufacturing Inspection Office (MIO), Manufacturing Inspection District Office (MIDO), or

manufacturing field office, Manufacturing Inspection Satellite Office (MISO), Certificate

Management Office (CMO), Cert ificate Management Unit (CMU) are replaced and understood

to mean the SO Division , or ICM Division when referring to its assigned products .

(4) All references to areas of responsibility related to Military Certification Office

(MCO) are replaced and understood to mean Military Certification Branch (MCB).

(5) All references to directorate product/geographic areas of responsibility related to

Aircraft Certification Office (ACO) or aircraft certification field office, or the Delegation Systems Certification Office (DS CO) are replaced and understood to mean the C&A Division, or ICM Division when referring to its assigned products.

(6) Refer production or airworthiness issues that require a directorate manager action to

the SO Division Director or ICM Division Director for assigned products.

(7) Refer design approval and continued operational safety responsibilities , including

issues that require a directorate manager or assistant directorate manager action to the C&A Division Director or as applicable to the ICM Di vision Director , and their deputies, respectively, within their delegated authorities .

(8) Refer enforcement activity requiring directorate manager action to the division

director of the enforcement’s originating office.

(9) Refer oversight activity requiring dire ctorate manager action to the division director of the oversight activity’ s originating office.

(10) Replace all references to the Director of AIR with the Executive Director of AIR.

(11) A ll references to the Transport Airplane Directorate, the Small Airplane Directorate, the Rotorcraft Directorate, the Engine and Propeller Directorate, or the Design, Manufacturing & Airworthiness Division in the context of regulations (including special conditions, exemptions, etc.) and policy (including issue papers, equivalent level of safety findings, etc.) are replaced and understood to mean the P&S Division.

(12) All references to Boeing Aviation Safety Oversight Office (BASOO), Boeing CMO, and Engine Certification Office (ECO), are replaced and understood to mean the ICM Division.

09/29/2023 8100.18A

(13) All references to Aircraft Evaluation Group (AEG) are replaced and understood to

mean Aircraft Evaluation Division (AED). Any references to Flight Standards (FS) Division, AIR Transportation Division, and flight standards field facilities are understood to mean the cognizant FS office.

(14) All references to international field offices in Brussels and Singapore are replaced

and understood to mean the AIR-40 International Office.

(15) All references to historical headquarters divisions are replaced and understood to

mean the six divisions: S&PI Division (AIR-300), ICM Division (AIR-500), P&S Division

(AIR-600), C&A Division (AIR-700), SO Division (AIR-800), EBO Division (AIR-900) and

four staff offices: Office of the Executive Director (AIR-1) and Deputy Executive Director (AIR-

2), Executive Staff Office (AIR-10), Senior Technical Experts Staff Office (AIR-20), and

International Office (AIR-40).

(16) For references created after 2017 but before the 2023 refinement organizational

change: all references to the following divisions under realignment: Organizational Performance Division, AIR-300 is replaced by the S&PI Division (AIR-300); International Division, AIR-400 is replaced by the International Office (AIR-40); Policy and Innovation (P&I) Division, AIR-600 is replaced by the P&S Division (AIR-600); and Enterprise Operations (EO) Division, AIR-900 is replaced by the EBO Division (AIR-900).

g. When an issue requires involvement of more than one division director, the affected

division directors must agree on one division director as the responsible division director.

Coordination between the affected divisions is required; however, only the identified responsible division director needs to sign any related documents.

h. All references to regional legal counsel will continue to remain valid as their offices are not part of AIR or the realignment.

7. Suggestions for Improvement. Please forward all comments on deficiencies, clarifications, or improvements regarding the content of this order to the AIR Directives Management Officer

(DMO) email box via email at 9-AWA-AVS-AIR-DMO@faa.gov or the FAA DRS at

https://drs.faa.gov. FAA Form 1320-19, Directive Feedback Information , is in appendix F of this order for your convenience.

Digitally signed by DANIEL J.

ELGAS

DANIEL J. ELGAS

Date: 2023.09.25 11:13:57 -04'00'

Daniel J. Elgas

Director, Policy and Standards Division

Aircraft Certification Service

09/29/2023 8100.18A

Appendix A

Appendix A. Figure A - 1: Re fine d Aircraft Certification Service Organization

Office of the Executive Director AIR - 1 and Deputy Executive Director AIR - 2 AIR - 20 AIR - 10 AIR - 40 Sr. Technical Executive Staff International Experts Staff Office Office Office AIR - 700 AIR - 500 AIR - 300 AIR - 600 AIR - 900 AIR - 800 Compliance & Integrated Certificate Safety & Performance Policy & Standards System Oversight Enterprise Business Airworthiness Management Integration Division Division Operations Division Division Division Division

A-1

09/29/2023 8100.18A

Appendix A

Figure A - 2: Office of the Executive Director Staff Offices with Branches

AIR - 10 Executive Staff Office AIR - 11 AIR - 12 Executive Support Branch Engagement & Outreach Branch AIR - 20 Senior Technical Experts Staff Office AIR - 40 International Field Division Support International Office Representatives AIR - 42 AIR - 41 Integration & International Engagement Performance Branch Branch

A-2

09/29/2023 8100.18A

Appendix A

Figure A - 3: Safety & Performance Integration Division

AIR - 300 Chart Color s Division Support Safety & Performance Integration Legend Division/Office Branch AIR - 320 AIR - 340 Section AIR - 360 Program Integration Branch Safety & Performance Data Branch Safety Programs Branch Unit AIR - 321 AIR - 341 AIR - 361 Program Management Section State Safety Program Section Data Analytics Section AIR - 342 AIR - 362 AIR - 322 Data & Technology Governance Incident Response Section Project Management Section Section AIR - 343 Data Management Section

A-3

09/29/2023 8100.18A

Appendix A

Figure A - 4: Integrated Certificate Management Division

AIR - 500 Division Integrated Certificate Support Management AIR - 520 AIR - 510 AIR - 580 AIR - 540 AIR - 570 Continued Certification System Operation Integration & Certification Operational Program & Oversight Performance Branch Safety (COS) Management Branch Branch Branch Branch AIR - 581 AIR - 571 AIR - 522 Performance & Production Section Airframe Planning Section Section Chart Color s Legend AIR - 572 AIR - 582 Airframe & Cabin Airplane Oversight Safety Section Section Division/Office AIR - 523 Systems Section AIR - 573 AIR - 583 Branch Mechanical Systems Supplier Systems Section Section AIR - 525 Section Engine & Propulsion AIR - 575 AIR - 585 Section Engine & Propulsion Unit Engine & Propulsion Section Section AIR - 576 Avionics & Electrical Systems Section

A-4

09/29/2023 8100.18A

Appendix A

Figure A - 5: Policy & Standards Division

AIR - 600 AIR - 650 Division Support Policy & Standards GA Alt Fuels Office AIR - 640 AIR - 610 Integration & AIR - 630 Certification AIR - 620 Performance Organization & System Policy Branch Engagement Technical Policy Branch Branch Branch AIR - 62A AIR - 63A Product Policy Management: Product Policy Management: Systems AIR - 611 AIR - 641 Transport Airplanes & Engines Section Emerging Standards Section Project Mgmt.

Technology Section Coordination AIR - 62B Section AIR - 631 AIR - 633 Product Policy Management: Design & Continued Operational GA Airplanes, Rotorcraft & Emerging Aircraft Section Maintenance Safety Systems Systems Section Section AIR - 643 AIR - 613 AIR - 627 Business AIR - 621 Certification AIR - 624 System Safety Operations Flight Test & Human Coordination Cabin Safety Assessment Section Section Factors Section AIR - 634 Section AIR - 632 Section System Oversight Production & Airworthiness & Delegation AIR - 621A AIR - 625 Section Section AIR - 628 Performance & AIR - 645 Engine & Propulsion Cybersecurity Consensus Environment Unit Section Section Standards Mgmt.

Section AIR - 626 AIR - 621B Avionics & Electrical Systems Section Chart Color s Human Factors Unit Legend AIR - 626C AIR - 646 Division/Office AIR - 626A AIR - 622 Avionics Technical Electrical Airframe Section Communication & Writing Systems Unit Surveillance Unit Branch Section AIR - 623 Section AIR - 626B AIR - 626D Mechanical Systems Avionics Avionics Software Section Navigation & & Components Unit Unit Flight Deck Unit

A-5

09/29/2023 8100.18A

Appendix A

Figure A - 6: Compliance & Airworthiness Division

AIR - 700 Flight Test Safety Division Support Compliance & Airworthiness Officer AIR - 740 AIR - 750 AIR - 770 AIR - 710 AIR - 720 AIR - 730 AIR - 760 AIR - 780 West Certification Flight Test & Human Operational Safety International Integration and East Certification Central Certification Branch Military Factors Branch Branch Validation Branch Performance Branch Branch Branch Certification Branch AIR - 751 AIR - 761 AIR - 771 AIR - 741 AIR - 731 AIR - 711 Administrative Administrative Administrative Project AIR - 721 Europe, Middle East Section Support Section Support Section Support Section Management Section Airworthiness East & Africa Products Section Section AIR - 772 AIR - 752 AIR - 762 AIR - 742 AIR - 712 Airframe Section Airframe Section Airframe Section Process & Technical Central Section AIR - 732 Standardization Section Americas AIR - 7 21A AIR - 753 AIR - 763 AIR - 773 Section Publications Unit Mechanical Mechanical Mechanical AIR - 713 AIR - 743 Systems Section Systems Section Systems Section West Section Business Operations AIR - 733 Section AIR - 722 Asia Pacific AIR - 764 AIR - 774 AIR - 754 COS Program Section Cabin Safety Cabin Safety Cabin Safety AIR - 714 AIR - 744 Management Section Section Section Policy & Standards Safety & Performance Section Section Analytics Section AIR - 765 AIR - 755 AIR - 775 Engine & Engine & Propulsion Engine & Propulsion Propulsion Section Section Section AIR - 723 Fleet Safety Section Chart Color s AIR - 766 AIR - 756 Legend AIR - 776 Avionics & Avionics & Electrical Avionics & Electrical Electrical Systems Division/Office Systems Section Systems Section Section Branch AIR - 757 AIR - 777 AIR - 767 Program Program Management Program Management Section Management Section Section Section Unit AIR - 778 Alaska Aviation Section

A-6

09/29/2023 8100.18A

Appendix A

Figure A - 7: System Oversight Division

AIR - 800 Division Support System Oversight AIR - 840 AIR - 870 AIR - 860 AIR - 850 Integration & Central Certificate Management West Certificate East Certificate Management Performance Management Branch Branch Branch Branch AIR - 854 AIR - 864 AIR - 861 AIR - 871 AIR - 851 AIR - 841 New Cumberland Minneapolis Oklahoma City Scottsdale Certificate Bradley Certificate Project Management Certificate Certificate Certificate Management Section Management Section Section Management Section Management Section Management Section AIR - 855 AIR - 872 AIR - 842 AIR - 865 AIR - 862 AIR - 852 Farmingdale Process & Technical Seattle Certificate Wichita Certificate Boston Certificate Ft Worth Certificate Certificate Standardization Management Section Management Section Management Section Management Section Management Section Section AIR - 873 AIR - 856 AIR - 866 AIR - 863 AIR - 843 AIR - 853 Los Angeles Orlando Certificate Vandalia Certificate San Antonio Certificate Business Operations Atlanta Certificate Certificate Management Section Management Section Management Section Management Section Section Management Section AIR - 844 Chart Colors AIR - 877 AIR - 867 AIR - 857 Safety & Legend Program Management Section Program Management Section Program Management Section Performance Analytics Section Division/Office Branch Section Unit

A-7

09/29/2023 8100.18A

Appendix A

Figure A - 8: Enterprise Business Operations Division

AIR - 900 Division Support Enterprise Business Operations AIR - 920 AIR - 930 AIR - 950 AIR - 940 AIR - 910 Financial & Contracts Workforce Management Technology Management Workforce Development Branch Operations Support Branch Services Branch Branch Branch AIR - 931 AIR - 951 AIR - 941 AIR - 921 AIR - 912 Workforce Engagement Technology Services Training Management Budget Services Section Outreach Services Section Section Section Section AIR - 913 AIR - 922 AIR - 952 AIR - 942 AIR - 932 Operations & Project Contract Services Technology Systems Training Development Workforce Solutions Services Section Section Section Section Section Chart Color s Legend AIR - 914 AIR - 943 Business Resource Section Division/Office Training Delivery & Systems Section Branch Section Unit

A-8

09/29/2023 8100.18A

Appendix B

Appendix B. Office Cross Reference Index

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ACE - 100M – Military Certification Office AIR - 7G0 – MCO Branch AIR - 780 – Military Certification Branch ACE - 102W – Continued Operational Safety Branch AIR - 7K1 – Continued Operational Safety Section AIR - 760 – Central Certification Branch ACE - 103 – Technical & Administrative Support AIR - 990 – Central Technical & Administrative Support AIR - 910 – Operations Support Branch Staff Branch ACE - 110 – Standards Office AIR - 690 – Small Airplane Standards Branch AIR - 620 – Technical Policy Branch ACE - 111 – Regulations & Policy Branch AIR - 691 – Regulations & Policy Section AIR - 620 – Technical Policy Branch ACE - 112 – Project Support Branch AIR - 692 – Project Support Section Project officers: AIR - 610 – Certificat ion Engagement Branch , Technical Policy: AIR - 620 – Technical Policy Branch Technical Writers: AIR - 646 Technical Writing Section ACE - 113 – Continued Operational Safety AIR - 693 – Continued Operational Safety Section AIR - 630 – Organization & System Polic y Branch ACE - 114 – Programs & Procedures Branch AIR - 694 – Programs & Procedures Section AIR - 620 – Technical Policy Branch ACE - 115A – Atlanta Aircraft Certification Office AIR - 7A0 – Atlanta ACO Branch AIR - 750 – East Certification Branch ACE - 115C – Chicago Aircraft Certification Office AIR - 7C0 – Chicago ACO Branch AIR - 760 – Central Certification Branch ACE - 115N – Anchorage Aircraft Certification AIR - 770 – Anchorage ACO Branch AIR - 778 – Alaska Aviation Section Office ACE - 115W – Wichita Aircraft Certification Office AIR - 7K0 – Wichita ACO Branch AIR - 760 – Central Certification Branch ACE - 116A – Flight Test Branch AIR - 712 – Southeast Section AIR - 711 – East Section ACE - 116C – Airframe & Administrative Branch AIR - 7C1 – Airframe & Administrative Services Section AIR - 760 – Central Certification Branch ACE - 116W – Mechanical Systems & Propulsion AIR - 7K2 – Mechanical Systems & Propulsion Section AIR - 760 – Central Certification Branch Branch ACE - 117A – Airframe Branch AIR - 7A1 – Airframe Section AIR - 750 – East Certification Branch ACE - 117C – Systems & Flight Test Branch AIR - 7C2 – Systems Section AIR - 760 – Central Certification Branch (Systems Personnel) ACE - 117C – Systems & Flight Test Branch (Flight AIR - 713 – Southwest Section AIR - 712 – Central Section Test Personnel )

B-1

09/29/2023 8100.18A

Appendix B

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ACE - 117W – Flight Test Branch (Program AIR - 7K5 – Program Management Section AIR - 760 – Central Certification Branch Management Personnel) ACE - 117W – Flight Test Branch (Flight Test AIR - 714 – Central Section AIR - 712 – Central Section Personnel) ACE - 118A – Propulsion & Services Branch AIR - 7A2 – Propulsion & Services Section AIR - 750 – East Certification Branch ACE - 118C – Propulsion & Program Management AIR - 7C3 – Propulsion & Program Management Section AIR - 760 – Central Certification Branch Branch ACE - 118W – Airframe & Services Branch AIR - 7K3 – Airframe & Services Section AIR - 760 – Central Certification Branch ACE - 119A – Systems & Equipment Branch AIR - 7A3 – Systems & Equipment Section AIR - 750 – East Certification Branch ACE - 119W – Electrical Systems & Avionics Branch AIR - 7K4 – Electrical Systems & Avionics Section AIR - 760 – Central Certification Branch ACE - 120A – Certificate Management & Safety AIR - 7A4 – Certificat e Management & Safety Oversight AIR - 750 – East Certification Branch Oversight Branch Section ACE - 180 – Manufacturing Inspection Office AIR - 890 – Central MIO Branch AIR - 860 – Central Certificate Management Branch ACE - MIDO - 42 – Atlanta MIDO AIR - 892 – Atlanta MIDO Section AIR - 853 – Atlanta Certificate Management Section ACE - MIDO - 43 – Wichita MIDO AIR - 893 – Wichita MIDO Section AIR - 865 – Wichita Certificate Management Section ACE - MIDO - 44 – Orlando MIDO AIR - 894 – Orlando MIDO Section AIR - 856 – Orlando Certifica te Management Section ACE - MIDO - 46 – Minneapolis MIDO AIR - 891 – Minneapolis / Chicago MIDO Section AIR - 864 – Minneapolis Certificate Management Section ACE - MIDO - 47 – Cleveland MIDO AIR - 895 – Vandalia / Cleveland / Detroit MIDO Section AIR - 866 – Vandalia Certificate Management Section ACE - MIDO48 – Vandalia MIDO AIR - 895 – Vandalia / Cleveland / Detroit MIDO Section AIR - 866 – Vandalia Certificate Management Section ACE - MISO - 53 – Detroit MISO AIR - 895 – Vandalia / Cleveland / Detroit MIDO Section AIR - 866 – Vandalia Certificate Management Section ACE - MISO - 54 – Chicago MISO AIR - 891 – Minneapolis / Chicago MIDO Section AIR - 864 – Minneapolis Certificate Management Section AIR - 110 – Certification Procedures Branch AIR - 6C0 – Certification Procedures Branch AIR - 630 – Organization & System Policy Branch AIR - 111 – Design Certification Section AIR - 6C1 – Design Certification Section AIR - 631 – Design & Maintenance Systems Section

B-2

09/29/2023 8100.18A

Appendix B

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) AIR - 112 – Production Certification Section AIR - 6C2 – Production Certification Section AIR - 6 32 – Production & Airworthiness Section AIR - 113 – Airworthiness Certification Section AIR - 6C3 – Airworthiness Certification Section AIR - 632 – Production & Airworthiness Section AIR - 120 – Technical & Administrative Support Branch AIR - 9A0 – Headquarters Technical & Administrative AIR - 640 – Integration & Performance Branch Support Branch AIR - 130 – Systems & Equipment Standards Branch AIR - 6B0 – Systems & Equipment Standards Branch AIR - 620 – Technical Policy Branch AIR - 131 – Navigation & Flight Deck Technologies AIR - 6B1 – Navigation & Flight Deck Technologies AIR - 626B – Avionics Navigation & Flight Deck Unit Section Section AIR - 132 – Communications & Surveillance Technologies AIR - 6B2 – Communication & Surveillance Technologies AIR - 626C – Avionics Communication & Surveillance Section Section Unit AIR - 133 – Electrical & Mechanical Equipment Section AIR - 6B3 – Electrical & Mechanical Equipment Section AIR - 620 – Technical Policy Branch AIR - 134 – System Integration Section AIR - 6B4 – System Integration Section AIR - 620 – Technical Policy Branch AIR - 140 – Operational Oversight Policy Branch AIR - 6D0 – Operational Oversight Policy Branch AIR - 630 – Organization & System Policy Branch AIR - 141 – Continued Operational Safety Policy Section AIR - 6D1 – Continued Operational Safety Policy Section AIR - 633 – Continued Operational Safety Systems Section AIR - 143 – Surveillance & Oversight Policy Section AIR - 6D2 – Surveillance & Oversight Policy Section AIR - 634 – System Oversight & Delegation Section AIR - 150 – Systems Performance & Development Branch AIR - 6E0 – Systems Performance & Development Branch AIR - 640 – Integration & Performance Branch AIR - 160 – Delegation & Organizational Procedures AIR - 6F0 – Delegation & Organizational Procedures AIR - 634 – System Oversight & Delegation Section and Branch Branch AVS - 60 – ODA Office N/A AIR - 20 – Alternative Fuels Program Staff AIR - 650 – G eneral A viation Alt ernative Fuels Office N/A AIR - 300 – Organizational Performance Division AIR - 300 – Safety & Performance Integration Div ision N/A AIR - 310 – Strategic Planning Branch AIR - 320 – Program Integration Branch N/A AIR - 320 – Change Management Branch AIR - 320 – Program Integration Branch N/A AIR - 330 – Standardization and Evaluation Branch AIR - 360 – Safety Programs Branch

B-3

09/29/2023 8100.18A

Appendix B

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) N/A AIR - 340 - System Analysis Branch AIR - 340 – Safety & Performance Data Branch N/A AIR - 350 - Executive Operations Branch AIR - 320 – Program Integration Branch N/A AIR - 360 - Safety Program Management Branch AIR - 360 – Safety Programs Branch AIR - 400 International Division AIR - 400 International Division AIR - 40 – International Office AIR - 410 International Policy Branch AIR - 410 International Policy Branch AIR - 41 – Integration & Performance Branch AIR - 420 International Affairs Branch AIR - 420 International Affairs Branch AIR - 42 – International Engagement Branch AIR - 510 – Administrative Services Branch AIR - 9C 0 – Administrative Services Branch AIR - 910 – Operations Support Branch AIR - 520 – Training Branch AIR - 9D0 – Training Branch AIR - 940 – Workforce Development Branch AIR - 530 – Planning & Financial Management AIR - 9E0 – Planning & Financial Management Branch AIR - 920 – Financial & Contracts Services Branch Branch ANE - 103 – Technical & Administrative Support AIR - 9B0 – New England Technical & Administrative AIR - 910 – Operations Support Branch Staff Support Branch ANE - 110 – Engine & Propeller Standards Staff AIR - 6A0 – Engine & Propeller Standards Branch AIR - 620 – Technical Policy Branch ANE - 111 – Rulemaking & Policy Branch AIR - 6A1 – Rulemaking & Policy Section Project officers: AIR - 610 – Certification Engagement Branch , Technical Policy: AIR - 620 – Technical Policy Branch Technical Writers: AIR - 646 Technical Writing Section ANE - 112 – COS & Standardization Branch AIR - 6A2 – COS & Standardization Section AIR - 633 – Continued Operational Safety Systems Section ANE - 140 – En gine Certification Office AIR - 7E0 – ECO Branch AIR - 500 – Integrated Certificate Management Division ANE - 141 – Engine Certification Branch 141 AIR - 7E1 – Engine Certification Section A AIR - 500 – Integrated Certificate Management Division ANE - 142 – Engine Certification Branch 142 AIR - 7E2 – Engine Certification Section B AIR - 500 – Integrated Certificate Management Division ANE - 150 – Boston Aircraft Certification Office AIR - 7B0 – Boston ACO Branch AIR - 750 – East Certification Branch AN E - 151 – Aviation Safety Branch AIR - 7B1 – Aviation Safety Section AIR - 750 – East Certification Branch

B-4

09/29/2023 8100.18A

Appendix B

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ANE - 170 – New York Aircraft Certification Office AIR - 7H0 – New York ACO Branch AIR - 750 – East Certification Branch ANE - 171 – Airframe & Mechanical Systems Branch AIR - 7H1 – Airframe & Mechanical Systems Section AIR - 750 – East Certification Branch ANE - 172 – Avionics & Administrative Services AIR - 7H2 – Avionics & Administrative Services Section AIR - 750 – East Certification Branch Branch ANE - 173 – Propulsion & Flight Test Branch AIR - 7H3 – Propulsion Section AIR - 750 – East Certification Branch (Pr opulsion Personnel) ANE - 173 – Propulsion & Flight Test Branch (Flight AIR - 711 – Northeast Section AIR - 711 – East Section Test Personnel) ANE - 180 – Manufacturing Inspection Office AIR - 8A0 – New England MIO Branch AIR - 850 – East Certificate Management Branch ANE - MIDO - 41 – Bradley MIDO AIR - 8A1 – Bradley MIDO Section (Enfield, CT) AIR - 851 – Bradley Certificate Management Section ANE - MIDO - 42 – Burlington MIDO AIR - 8A2 – Bur lington MIDO Section AIR - 852 – Boston Certificate Management Section ANE - MIDO - 44 – New Cumberland MIDO AIR - 8A4 – New Cumberland MIDO Section AIR - 854 – New Cumberland Certificate Management Section ANE - MIDO - 46 – Farmingdale MIDO AIR - 8A5 – Farmingdale / Saddle Brook MIDO Section AIR - 855 – Farmingdale Certificate Management Section ANE - MISO - 45 – Saddle Brook MISO AIR - 8A5 – Farmingdale / Saddle Brook MIDO Section AIR - 855 – Farmingdale Certificate Management Section ANM - 100B – Boeing Aviation Safety Oversight AIR - 860 – BASOO Branch AIR - 500 – Integrated Certificate Management Division Office ANM - 100D – Denver Aircraft Certification Office AIR - 7D0 – Denver ACO Branch AIR - 770 – West Certification Branch ANM - 100L – Los Angeles Aircr aft Certification AIR - 790 – Los Angeles ACO Branch AIR - 770 – West Certification Branch Office ANM - 100S – Seattle Aircraft Certification Office AIR - 780 – Seattle ACO Branch AIR - 770 – West Certification Branch ANM - 102B – Certification Program Management AIR - 861 – Certification Program Management Section AIR - 510 – Certification Program Management Branch Branch ANM - 102S – Program Management Branch AIR - 781 – Program Management Section AIR - 770 – West Certification Branch ANM - 103 – Technical & Administrative Support AIR - 970 – Northwest Technical & Administrative AIR - 910 – Operations Support Branch Staff Support Branch

B-5

09/29/2023 8100.18A

Appendix B

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ANM - 103L – Technical & Administrative Support AIR - 791 – Technical & Administrative Support Section AIR - 770 – West Certification Branch Staff ANM - 104B – Delegation Oversight Branch AIR - 862 – Delegation Oversight Section AIR - 500 – Integrated Certificate Management ANM - 106B – Technical Support Services Branch AIR - 863 – Technical Support Services Section AIR - 570 – Certification Branch ANM - 108 – Manufacturing Inspection Office AIR - 870 – Northwest MIO Branch AIR - 870 – West Certification Management Branch ANM - 108B – Boeing Certificate Management AIR - 871 – Boeing CMO Section AIR - 580 – System Operation & Over sight Branch Office ANM - 108B – Charleston CMU - 47 AIR - 871 – Boeing CMO Section AIR - 580 – System Operation & Oversight Branch ANM - 108B – Everett CMU - 41 AIR - 871 – Boeing CMO Section AIR - 580 – System Operation & Oversight Branch ANM - 108B – Renton CMU - 42 AIR - 871 – Boeing CMO Section AIR - 580 – System Operation & Oversight Branch ANM - 108L – Los Angeles MIDO AIR - 873 – Los Angeles / Van Nuys MIDO Section AIR - 873 – Los Angeles Certificate Management Section ANM - 108P – Phoenix MIDO AIR - 874 – Phoenix MIDO Section AIR - 871 – Scottsdale Certificate Management Section ANM - 108S – Seattle MIDO AIR - 872 – Seattle MIDO Section AIR - 872 – Seattle Certificate Management Section ANM - 108V – Van Nuys MIDO AIR - 873 – Los Angeles / Van Nuys MIDO Section AIR - 873 – Los Angeles Certificate Management Section ANM - 110 – Transport Standards Staff AIR - 670 – Transport Standards Branch AIR - 620 – Technical Policy Branch ANM - 111 – Airplane & Flight Crew Interface AIR - 671 – Airplane & Flight Crew Interface Section AIR - 620 – Technical Policy Branch ANM - 112 – Propulsion & Mechanical Systems AIR - 672 – Propulsion & Mechanical Systems Section AIR - 625 – Engine & Propulsion Section and AIR - 623 – Mechanical Systems Section ANM - 113 – Standardization AIR - 673 – Standardization Section Project officers: AIR - 610 – Certification Engagement Branch , Technical Policy: AIR - 620 – Technical Policy Branch Technical Writers: AIR - 646 Technical Writing Section ANM - 114 – Airworthiness & Technical AIR - 674 – Airworthiness & Technical Communications AIR - 720 – Operational Safety Branch Communication Section ANM - 115 – Airframe & Cabin Safety Branch AIR - 675 – Airframe & Cabin Safety Section AIR - 622 – Airframe Section and AIR - 624 – Cabin Safety Section ANM - 116 – International Branch AIR - 676 – International Section AIR - 730 – International Validation Branch

B-6

09/29/2023 8100.18A

Appendix B

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ANM - 117 – Safety Management Branch AIR - 677 – Safety Management Section AIR - 627 – System Safety Assessment Section and AIR - 633 – Continued Operational Safety Systems Section ANM - 120L – Airframe Branch AIR - 792 – Airframe Section AIR - 770 – West Certification Branch ANM - 120S – Airframe Branch AIR - 782 – Airframe Section AIR - 770 – West Certification Branch ANM - 130L – Systems & Equipment Branch AIR - 793 – Systems & Equipment Section AIR - 770 – West Certification Branch ANM - 130S – Systems & Equipment Branch AIR - 783 – Systems & Equipment Section AIR - 770 – West Certification Branch ANM - 140L – Propulsion Branch AIR - 794 – Propulsion Section AIR - 770 – West Certification Branch ANM - 140S – Propulsion Branch AIR - 784 – Propulsion Section AIR - 770 – West Certification Branch ANM - 150L – Cabin Safety, Mechanical & AIR - 795 – Cabin Safety & Environmental Systems AIR - 770 – West Certification Branch Environmental Systems Section ANM - 150S – Cabin Safety & Environmental AIR - 785 – Cabin Safety & Environmental Systems AIR - 770 – West Certification Branch Systems Branch Section ANM - 160L – Flight Test Branch AIR - 716 – West Section AIR - 713 – West Section ANM - 160S – Flight Test Branch AIR - 715 – Northwest Section AIR - 713 – West Section ASW - 103 – Technical & Administrative Support AIR - 980 – Southwest Technical & Administrative AIR - 910 – Operations Support Branch Staff Support Branch ASW - 110 – Rotorcraft Standards Staff AIR - 680 – Rotorcraft Standards Branch AIR - 620 – Technical Policy Branch ASW - 111 – Regulations & Guidance Group AIR - 681 – Regu lations & Policy Section Project officers: AIR - 610 – Certification Engagement Branch , Technical Policy: AIR - 620 – Technical Policy Branch Technical Writers: AIR - 646 Technical Writing Section ASW - 112 – Safety Management Group AIR - 682 – Safety Management Section AIR - 627 – System Safety Assessment Section and AIR - 633 – Continued Operational Safety Systems Section ASW - 130 – Delegation Systems Certification Office AIR - 7J0 – DSCO Branch AIR - 760 – Central Certification Branch ASW - 140 – Fort Wort h Aircraft Certification Office AIR - 7F0 – Fort Worth ACO Branch AIR - 760 – Central Certification Branch ASW - 141 – Shared Services Branch AIR - 713 – Southwest Section AIR - 712 – Central Section ASW - 142 – Certification Branch AIR - 7F1 – Certification Section AIR - 760 – Central Certification Branch

B-7

09/29/2023 8100.18A

Appendix B

2017 Pre - Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ASW - 143 – Program Management Branch AIR - 7F2 – Program Management / COS Section AIR - 760 – Central Certification Branch ASW - 180 – Manufacturing Inspection Office AIR - 880 – Southwest MIO Branch AIR - 860 – Central Certificate Management Branch ASW - MIDO - 41 – Bethany MIDO AIR - 881 – Bethany MIDO Section AIR - 861 – Oklahoma City Certificate Management Section ASW - MIDO - 42 – Fort Worth MIDO AIR - 882 – Fort Worth MIDO Section AIR - 862 – Ft. Worth Certificate Management Section ASW - MIDO - 43 – San Antonio MIDO AIR - 883 – San Antonio MIDO Section AIR - 863 – San Antonio Certificate Management Section N/A AIR - 710 – Flight Test Branch AIR - 710 – Flight Test & Human Factors Branch AD/SAIB coordination with ANM - 114, ANE - 110, AIR - 720 – Operational Safety Branch AIR - 720 – Operational Safety Branch ACE - 110, and ASW - 110 N/A AIR - 721 – Airworthiness Products Section AIR - 721 – Airworthiness Products Section N/A AIR - 721A – Transport Unit AIR - 721A – Publications Unit N/A AIR - 721B – General Aviation & Rotorcraft Unit AIR - 721A – Publications Unit N/A AIR - 722 – COS Program Management Section AIR - 722 – COS Program Management Section N/A AIR - 723 – Fleet Safety Section AIR - 723 – Fleet Safety Section N/A AIR - 730 – International Validation Branch AIR - 730 – International Validation Branch N/A AIR - 731 – Large Aircraft Section AIR - 730 – International Validation Branch N/A AIR - 732 – General Aviation Rotorcraft Section AIR - 730 – International Validation Branch N/A AIR - 733 – Propulsion TSO Section AIR - 730 – International Validation Branch N/A AIR - 734 – Technical Support Section AIR - 730 – International Validation Branch N/A AIR - 760 – Standardization and Support Branch AIR - 740 – Integration & Performance Branch N/A AIR - 840 – Strategic Development & Operations Branch AIR - 840 – Integration & Performance Branch N/A AIR - 960 – Business Services Branch AIR - 910 – Operations Support Branch

B-8

09/29/2023 8100.18A

Appendix C

Appendix C. Documents Reviewed

Order Number Change Title

VS 1100.2B Managing AVS Delegation Programs 4040.26 C Aircraft Certification Service Flight Test Risk Management Program 8000.51C Aircraft Certification Directorates' Delegation of Authority 8000.79 Use of Electronic Technology and Storage of Data 8000.95 B Designee Management Policy 8040.1C Airworthiness Directives IR - M 8040.1C Airworthiness Directives Manual 8040.5 Airworthiness Directive Process for Mandatory Continuing Airworthiness Information 8100.8D Designee Management Handbook 8100.11D Requirements for Finding Undue Burden and No Undue Burden Under 14 CFR Part 21 8100.15B 3 Organization Designation Authorization Procedures IR 8100.16 Aircraft Certification Service Policy Statement, Policy Memorandum, and Deviation Memorandum Systems 8110.4C 6 Type Certification 8110.9 Handbook on Vibration Substantiation and Fatigue Evaluation of Helicopter and Other Power Transmissions Systems 8110.37 F Designated Engineering Representative (DER) Handbook 8110.42D Parts Manufacturer Approval Procedures 8110.48 A How to Establish the Certification Basis for Changed Aeronautical Products 8110.49 A Software Approval Guidelines 8110.51 Acceptability of Previously Approved Certification Compliance Data from Foreign Sources 8110.52 B Type Validation and Post - Type Validation Procedures 8110.53 Reciprocal Acceptance of Repair Design Data Approvals Between FAA and TCCA 8110.54A Instructions for Continued Airworthiness Responsibilities, Requirements, and Contents 8110.55B How to Evaluate and Accept Processes for Aeronautical Database Suppliers 8110.56 B Restricted Category Type Certification

C-1

09/29/2023 8100.18A

Appendix C

Order Number Change Title 8110.100B Special Airworthiness Information Bulletin 8110.101A Type Certification Procedures for Military Commercial Derivative Aircraft IR 8110.102 Implementing Risk Based Resource Targeting (RBRT) 8110.103B Alternative Methods of Compliance (AMOC) 8110.105A Simple and Complex Electronic Hardware Approval Guidance 8110.106 Assessing the Relative Risk of Title 14 CFR Parts 8110.107A Monitor Safety/Analyze Data 8110.112A Standardized Procedures for Usage of Issue Papers and Development of Equivalent Levels of Safety Memorandums 8110.113 Approval of Flammability Test Data in Support of Major Repairs or Major Alterations 8110.115 1 Certification Project Initiation and Certification Project Notification 8110.116 Procedures for Requesting Development of SAE Standards 8110.117A Service Bulletins Related to Airworthiness Directives 8110.118 Commercial Parts 8110.119 Streamlined Process for Parts Manufacturer Approval (PMA) 8110.120 Processing Surrendered, Abandoned, and Historical Aircraft Type Certificates 8110.121 Type Certificate Data Sheet (TCDS) Notes 8120.12A 1 Production Approval Holder Use of Other Parties to Supplement Their Supplier Control Program 8120.13A International Corporation Supplier Surveillance Program Procedures 8120.16A Suspected Unapproved Parts Program 8120.18 PAHs Who Rebuild or Alter Their Own Products Under 14 (CFR 43.3(j)) 8120.22A Production Approval Procedures 8120.23A Certificate Management of Production Approval Holders 8130.2 J Airworthiness Certification of Aircraft and Related Product s 8130.21H 1 Procedures for Completion and Use of the Authorized Release Certificate, FAA Form 8130 - 3, Airworthiness Approval 8130.34 D Airworthiness Certification of Unmanned Aircraft Systems and Optionally Piloted Aircraft 8130.35 C Amateur - Built Aircraft National Kit Evaluation Team 8130.36 Special Light - Sport Aircraft Audit Program 8150.1D Technical Standard Order Program 8150.4 Certification of Cargo Containers with Self - Contained Temperature Control Systems (Active ULDs)

C-2

09/29/2023 8100.18A

Appendix C

AC Number Title Change Number 00 - 56B Voluntary Industry Distributor Accreditation Program 00 - 58B Voluntary Disclosure Reporting Program 00 - 66 Selection of Cyclic Redundancy Code and Checksum Algorithms to Ensure Critical Data Integrity 00 - 68 Aircraft Certification Service Voluntary Disclosure Reporting Program 20 - 18B Qualification Testing of Turbojet and Turbofan Engine Thrust Reversers 20 - 24D Approval of Propulsion Fuels, Additives, and Lubricating Oils 20 - 27G Certification and Operation of Amateur - Built Aircraft 20 - 29B Use of Aircraft Fuel Anti - Icing Additives 20 - 30B Aircraft Position Light and Anticollision Light Installations 20 - 37E Aircraft Propeller Maintenance 20 - 40 Placards for Battery - Excited Alternators Installed in Light Aircraft 20 - 41A Substitute Technical Standard Order (TSO) Aircraft Equipment 20 - 42D Hand Fire Extinguishers for use in Aircraft 20 - 44 Glass Fiber Fabric for Aircraft Covering 20 - 45 Safe tying of Turnbuckles on Civil Aircraft 20 - 47 Exterior Colored Band around Exits on Transport Airplanes 20 - 53B Protection of Aircraft Fuel Systems Against Fuel Vapor Ignition Caused by Lightning 20 - 56A Marking of TSO - C72b Individual Flotation Devices 20 - 65A U.S. Airworthiness Certificates and Authorizations for Operation of Domestic and Foreign Aircraft 20 - 66B Propeller Vibration and Fatigue 20 - 67B Airborne VHF Communication Equipment Installations 20 - 68B Recommended Radiation Safety Precautions for Ground Operation of Airborne Weather Radar 20 - 69 Conspicuity of Aircraft Instrument Malfunction Indicators 20 - 71 Dual Locking Devices on Fasteners 20 - 73A Aircraft Ice Protection 20 - 74 Aircraft Position and Anticollision Light Measurements 20 - 88A Guidelines on the Marking of Aircraft Powerplant Instruments (Displays) 20 - 100 General Guidelines for Measuring Fire - Extinguishing Agent Concentrations in Powerplant Compartments

C-3

09/29/2023 8100.18A

Appendix C

AC Number Change Title Number 20 - 104 Revised Powerplant Engineering Report No. 3A Standard Fire Test Apparatus and Procedure (for Flexible Hose Assemblies) 20 - 106 Aircraft Inspection for the General Aviation Aircraft Owner 20 - 107B 1 Composite Aircraft Structure 20 - 113 Pilot Precautions and Procedures to be taken in Preventing Aircraft Reciprocating Engine Induction System and Fuel System Icing Problems 20 - 115C Airborne Software Assurance 20 - 116 Marking Aircraft Fuel Filler Openings with Color Coded Decals 20 - 118A Emergency Evacuation Demonstration 20 - 119 Fuel Drain Valves 20 - 120 Nondirectional Beacon Frequency Congestion 20 - 124 Water Ingestion Testing for Turbine Powered Airplanes 20 - 127 Use of Society of Automotive Engineers (SAE) Class H11 Bolts 20 - 128A Design Considerations for Minimizing Hazards caused by Uncontained Turbine Engine and Auxiliary Power Unit Rotor Failure 20 - 131A Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II) and Mode S Transponders 20 - 133 Cockpit Noise and Speech Interference Between Crewmember 20 - 134 Test Procedures for Maximum Allowable Airspeed Indicators 20 - 135 Powerplant Installation and Propulsion System Component Fire Protection Test Methods, Standards and Criteria 20 - 136B Aircraft Electrical and Electronic System Lightning Protection 20 - 138D 2 Airworthiness Approval of Positioning and Navigation Systems 20 - 140C Guidelines for Design Approval of Aircraft Data Link Communication Systems Supporting Air Traffic Services (ATS) 20 - 141B Airworthiness and Operational Approval of Digital Flight Data Recorder Systems 20 - 144 Recommended Method for FAA approval of Aircraft Fire Extinguishing System Components 20 - 146 Methodology for Dynamic Seat Certification by Analysis for Use in Part 23, 25, 27, and 29 Airplanes and Rotorcraft 20 - 147A Turbojet, Turboprop, Turboshaft, and Turbofan Engine Induction System Icing and Ice Ingestion 20 - 148 Reusable Software Components 20 - 149B Installation Guidance for Domestic Flight Information Services - Broadcast 20 - 150B Airworthiness Approval of Satellite Voice (SATVOICE) Equipment Supporting Air Traffic Service (ATS) Communication 20 - 151B Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II), Versions 7.0 & 7.1 and Associated Mode S Transponders

C-4

09/29/2023 8100.18A

Appendix C

AC Number Change Title Number 20 - 152 RTCA, Inc., Document RTCA/DO - 254, Design Assurance Guidance for Airborne Electronic Hardware 20 - 153B Acceptance of Aeronautical Data Processes and Associated Databases 20 - 155A Industry Documents to Support Aircraft Lightning Protection Certification 20 - 156 Aviation Databus Assurance 20 - 157 How to Prepare Reliability Assessment Plans for Aircraft Systems and Equipment 20 - 158A The Certification of Aircraft Electrical and Electronic Systems for Operation in the High - Intensity Radiated Fields (HIRF) Environment 20 - 160A Onboard Recording of Controller Pilot Data Link Communication (CPDLC) In Crash Survivable Memory 20 - 161 Aircraft Onboard Weight and Balance Systems 20 - 158A The Certification of Aircraft Electrical and Electronic Systems for Operation in the High - Intensity Radiated Fields (HIRF) Environment 20 - 160A Onboard Recording of Controller Pilot Data Link Communication (CPDLC) In Crash Survivable Memory 20 - 161 Aircraft Onboard Weight and Balance Systems 20 - 162A Airworthiness Approval of Installed Passive Ultra High Frequency (UHF) Radio Frequency Identification (RFID) Tags 20 - 163 Displaying Geometric Altitude Relative to Mean Sea Level 20 - 164 Designing and Demonstrating Aircraft Tolerance to Portable Electronic Devices 20 - 165B Airworthiness Approval of Automatic Dependent Surveillance - Broadcast (ADS - B) Out Systems 20 - 166A Issue Paper Process 20 - 167A Airworthiness Approval of Enhanced Vision System, Synthetic Vision System, Combined Vision System, and Enhanced Flight Vision System Equipment 20 - 168 Certification Guidance for Installation of Non - Essential, Non - Required Aircraft Cabin Systems & Equipment (CS&E) 20 - 169 Guidance for Certification of Military and Special Mission Modifications and Equipment for Commercial Derivative Aircraft (CDA) 20 - 170 1 Integrated Modular Avionics Development, Verification, Integration, and Approval Using RTCA/DO - 297 and Technical Standard Order C153 20 - 171 Alternatives to RTCA/DO - 178B for Software in Airborne Systems and Equipment 20 - 172B Airworthiness Approval for ADS - B in Systems and Applications 20 - 173 Installation of Electronic Flight Bag Components 20 - 174 Development of Civil Aircraft and Systems 20 - 175 Controls for Flight Deck Systems 20 - 176A Service Bulletins Related to Airworthiness Directives and Indicating FAA Approval on Service Documents 20 - 177 Design and Installation Guidance for an Airborne System for Non - Required Telecommunication Service in Non - Aeronautical Frequency Bands 20 - 178 Flammability Testing of Aircraft Cabin Interior Panels After Alterations

C-5

09/29/2023 8100.18A

Appendix C

AC Number Change Title Number 20 - 179 Certification Data Retention Agreements and Government Records 20 - 181 Airworthiness Approval of Attitude Heading Reference System (AHRS) Equipment 20 - 182A Airworthiness Approval for Aircraft Weather Radar Systems 20 - 183 Laser Airworthiness Installation Guidance 20 - 184 Guidance on Testing and Installation of Rechargeable Lithium Battery and Battery Systems on Aircraft 20 - 185 Airworthiness Approval of Synthetic Vision Guidance System 21.17 - 1A 1 Type Certification - Airships 21.17 - 2A Type Certification - Fixed Wing Gliders (Sailplanes), Including Powered Gliders 21.17 - 3 Type Certification of Very Light Airplanes Under FAR 21.17(b) 21.101 - 1B Establishing the Certification Basis of Changed Aeronautical Products 21.303 - 4 Application for Parts Manufacturer Approval Via Tests and Computations or Identicality 21 - 2L Complying with the Requirements of Importing Countries or Jurisdictions When Exporting U.S.

Products, Articles, or Parts 21 - 4B Special Flight Permits for Operation of Overweight Aircraft 21 - 9B Manufacturers Reporting Failures, Malfunctions, or Defects 21 - 12C Application for U.S. Airworthiness Certificate, FAA Form 8130 - 6 21 - 13 Standard Airworthiness Certification of Surplus Military Aircraft and Aircraft Built from Spare and Surplus Parts 21 - 16G RTCA Document DO - 160 versions D, E, F, and G, “Environmental Conditions and Test Procedures for Airborne Equipment 21 - 19B Installation of Used Aircraft Engines in New Production Aircraft 21 - 21 Use of Automobile Gasoline in Agricultural Aircraft 21 - 22 Injury Criteria for Human Exposure to Impact 21 - 23B Airworthiness Certification of Civil Aircraft, Engine, Propellers, and Related Products Imported to the United States 21 - 24A Extending a Production Certificate to a Facility Located in a Bilateral Airworthiness Agreement Country 21 - 25B Approval of Modified Seating System Initially Approved Under a Technical Standard Order 21 - 26A Quality Control for the Manufacture of Composite Structures 21 - 28 Airworthiness Certification of U.S. - Produced Aircraft and Engine Kits Assembled Outside the United States 21 - 29D Detecting and Reporting Suspected Unapproved Parts 21 - 31A Quality Control for the Manufacture of Non - Metallic Compartment Interior Components 21 - 32B Control of Products and Parts Shipped Prior to Type Certificate Issuance

C-6

09/29/2023 8100.18A

Appendix C

AC Number Title Change Number 21 - 34 Shoulder Harness - Safety Belt Installations 21 - 37 Primary Category Aircraft 21 - 41A Replacing MIL - S - 8879C With SAE AS8879 21 - 43A Production Approvals Under Subparts G, K, & O 21 - 44A Issuance of Export Airworthiness Approvals Under 14 CFR Part 21 Subpart L 21 - 45 Commercial Parts 21 - 46A Technical Standard Order Program 21 - 47 Submittal of Data to an ACO, a DER or an ODA for a Major Repair or a Major Alteration 21 - 48 Using Electronic Modeling Systems as Primary Type Design Data 21 - 49 Gaining Approval of Seats with Integrated Electronic Components 21 - 50 Installation of TSOA Articles and LODA Appliances 21 - 51 Applicant’s Showing of Compliance and Certifying Statement of Compliance 21 - 52 Obtaining Foreign Design Approval / Acceptance of U.S. Products and Articles 21 - 54 Experimental Airworthiness Certification of Certain Former Military Aircraft 21 - 55 Process to Support FAA Findings of Undue Burden or No Undue Burden for PAHs Requesting to Use a Manufacturing Facility Located Outside of the United States 23.562 - 1 Dynamic Testing of Part 23 Airplane Seat/Restraint Systems and Occupant Protection 23.607 - 1 Self - Locking Nuts on Bolts Subject to Rotation 23.629 - 1B Means of Compliance with Title 14 CFR, Part 23, § 23.629, Flutter 23.1309 - 1E System Safety Analysis and Assessment for Part 23 Airplanes 23.1311 - 1C Installation of Electronic Display in Part 23 Airplanes 23.1521 - 1B Type Certification of Automobile Gasoline in Part 23 Airplanes with Reciprocating Engines 23.1521 - 2 1 Type Certification of Oxygenates and Oxygenated Gasoline Fuels in Part 23 Airplanes with Reciprocating Engines 23 - 2A 1 Flammability Tests 23 - 8C Flight Test Guide for Certification of Part 23 Airplanes 23 - 9 Evaluation of Flight Loads on Small Airplanes with T, V, +, or Y Empennage Configurations 23 - 10 Auxiliary Fuel Systems for Reciprocating and Turbine Powered Part 23 Airplanes 23 - 13A Fatigue, Fail - Safe, and Damage Tolerance Evaluation of Metallic Structure for Normal, Utility, Acrobatic, and Commuter Category Airplanes 23 - 14 Type Certification Basis for Conversion from Reciprocating Engine to Turbine - Powered Part 23 Airplanes

C-7

09/29/2023 8100.18A

Appendix C

AC Number Title Change Number 23 - 15A 1 Small Airplane Certification Compliance Program 23 - 16A Powerplant Guide for Certification of Part 23 Airplanes and Airships 23 - 17C Systems and Equipment Guide for Certification of Part 23 Airplanes and Airships 23 - 18 Installation of Terrain Awareness and Warning System (TAWS) Approved for Part 23 Airplanes 23 - 19A Airframe Guide for Certification of Part 23 Airplanes 23 - 20 Acceptance Guidance on Material Procurement and Process Specifications for Polymer Matrix Composite Systems 23 - 21 1 Airworthiness Compliance Checklists Used to Substantiate Major Alterations for Small Airplanes 23 - 22 Guidance for Approved Model List (AML) Supplemental Type Certificated (STC) Approval of Part 23 Airplane Avionics Installations 23 - 23 Standardization Guide for Integrated Cockpits in Part 23 Airplanes 23 - 24 Airworthiness Compliance Checklists for Common Part 23 Supplemental Type Certificate (STC) Projects 23 - 27 Parts and Materials Substitution for Vintage Aircraft 23 - 1523 Minimum Flight Crew 25.307 - 1 Proof of Structure 25.335 - 1A Design Dive Speed 25.341 - 1 Dynamic Gust Loads 25.362 - 1 Engine Failure Loads 25.415 - 1 Ground Gust Conditions 25.491 - 1 Taxi, Takeoff and Landing Roll Design Loads 25.562 - 1B 1 Dynamic Evaluation of Seat Restraint Systems and Occupant Protection on Transport Airplanes 25.571 - 1D Damage Tolerance and Fatigue Evaluation of Structure 25.613 - 1 Material Strength Properties and Material Design Values 25.621 - 1 Casting Factors 25.629 - 1B Aeroelastic Stability Substantiation of Transport Category Airplanes 25.703 - 1 Takeoff Configuration Warning Systems 25.723 - 1 Shock Absorption Tests 25.729 - 1 Transport Airplane Landing Gear Retracting Mechanism 25.735 - 1 Brakes and Braking Systems Certification Tests and Analysis 25.773 - 1 Pilot Compartment View Design Considerations

C-8

09/29/2023 8100.18A

Appendix C

AC Number Title Change Number 25.775 - 1 Windows and Windshields 25.783 - 1A Fuselage Doors and Hatches 25.785 - 1B Flight Attendant Seat and Torso Restraint System Installations 25.795 - 1A Flightdeck Intrusion Resistance 25.795 - 2A Flight Deck Penetration Resistance 25.795 - 3 Flightdeck Protection (Smoke and Fumes) 25.795 - 4 Passenger Cabin Smoke Protection 25.795 - 5 Cargo Compartment Fire Suppression 25.795 - 6 Least Risk Bomb Location 25.795 - 7 Survivability of Systems 25.795 - 8 Interior Design to Facilitate Searches 25.795 - 9 Chemical Oxygen Generator Security Standards 25.803 - 1A Emergency Evacuation Demonstrations 25.807 - 1 Uniform Distribution of Exits 25.812 - 1A Floor Proximity Emergency Escape Path Marking 25.812 - 2 Floor Proximity Emergency Escape Path Marking Systems Incorporating Photoluminescent Elements 25.851 - 1 Built - in Fire Extinguishing/Suppression Systems in Class C and Class F Cargo Compartments 25.853 - 1 Flammability Requirements for Aircraft Seat Cushions 25.856 - 1 Thermal/Acoustic Insulation Flame Propagation Test Method Details 25.856 - 2A Installation of Thermal/Acoustic Insulation for Burnthrough Protection 25.857 - 1 Class B and F Cargo Compartments 25.869 - 1A Fire Protection Systems 25.899 - 1 Electrical bonding and protection against static electricity 25.905 - 1 Minimizing the Hazards from Propeller Blade and Hub Failures 25.939 - 1 Evaluating Turbine Engine Operating Characteristics 25.963 - 1 Fuel Tank Access Covers 25.975 - 1 Fuel Vent Fire Protection 25.981 - 1C Fuel Tank Ignition Source Prevention Guidelines

C-9

09/29/2023 8100.18A

Appendix C

AC Number Change Title Number 25.981 - 2A Fuel Tank Flammability Reduction Means 25.994 - 1 Design Considerations to Protect Fuel Systems during a Wheels - Up Landing 25.1302 - 1 Installed Systems and Equipment for Use by the Flightcrew 25.1309 - 1A System Design and Analysis 25.1322 - 1 Flightcrew Alerting 25.1329 - 1C 1 Approval of Flight Guidance Systems 25.1353 - 1A Electrical Equipment and Installations 25.1357 - 1A Circuit Protective Devices 25.1360 - 1 Protection Against Injury 25.1362 - 1 Electrical Supplies for Emergency Conditions 25.1365 - 1 Electrical Appliances, Motors, and Transformers 25.1435 - 1 Hydraulic System Certification Tests and Analysis 25.1455 - 1 Waste water /Potable Water Drain System Certification Testing 25 - 1457 - 1A Cockpit Voice Recorder Installations 25 - 1523 - 1 Minimum Flightcrew 25.1529 - 1A Instructions for Continued Airworthiness of Structural Repairs on Transport Airplanes 25.1581 - 1 1 Airplane Flight Manual 25.1701 - 1 Certification of Electrical Wiring Interconnection Systems on Transport Category Airplanes 25 - 7D Flight Test Guide for Certification of Transport Category Airplanes 25 - 8 Auxiliary Fuel Systems Installations 25 - 9A Smoke Detection, Penetration, and Evacuation Tests and Related Flight Manual Emergency Procedures 25 - 11B Electronic Flight Displays 25 - 12 Airworthiness Criteria for the Approval of Airborne Windshear Warning Systems in Transport Category 25 - 13 Reduced and Derated Takeoff Thrust (Power) Procedures 25 - 15 Approval of Flight Management Systems in Transport Category Airplanes 25 - 16 Electrical Fault and Fire Prevention and Protection 25 - 17A Transport Airplane Cabin Interiors Crashworthiness Handbook 25 - 18 Transport Category Airplanes Modified for Cargo Service

C-10

09/29/2023 8100.18A

Appendix C

AC Number Change Title Number 25 - 19A Certification Maintenance Requirements 25 - 20 Pressurization, Ventilation and Oxygen Systems Assessment for Subsonic Flight including High Altitude Operation 25 - 22 Certification of Transport Airplane Mechanical Systems 25 - 23 Airworthiness Criteria for the Installation Approval of a Terrain Awareness and Warning System (TAWS) for Part 25 Airplanes 25 - 24 Sustained Engine Imbalance 25 - 25A Performance and Handling Characteristics in Icing Conditions 25 - 26 Development of Standard Wiring Practices Documentation 25 - 27A Development of Transport Category Airplane Electrical Wiring Interconnection Systems Instructions for Continued Airworthiness Using and Enhanced Zonal Analysis Procedure 25 - 28 Compliance of Transport Category Airplanes with Certification Requirements for Flight in Icing Conditions 25 - 29 Development of a Nondestructive Inspection Program/Organization 25 - 30 Fuel Tank Strength in Emergency Landing Conditions 25 - 31 Takeoff Performance Data for Operations on Contaminated Runways 25 - 32 Landing Performance Data for Time - of - Arrival Landing Performance Assessments 26 - 1 Part 26, Continued Airworthiness and Safety Improvements 27 - 1B 7 Certification of Normal Category Rotorcraft 29 - 2C 7 Certification of Transport Category Rotorcraft 33.4 - 1 Instructions for Continued Airworthiness 33.4 - 2 Instructions for Continued Airworthiness: In - Service Inspection of Safety Critical Turbine Engine Parts at Piece - Part Opportunity 33.4 - 3 1 Instructions for Continued Airworthiness, Aircraft Engine High Intensity Radiated Fields (HIRF) and Lightning Protection Features 33.7 - 1 Ratings and Operating Limitations for Turbine Engines (Sections 33.7 and 33.8) 33.14 - 1 Damage Tolerance for High Energy Turbine Engine Rotors 33.15 - 1 Manufacturing Process of Premium Quality Titanium Alloy Rotating Engine Components 33.15 - 2 Manufacturing Processes for Premium Quality Nickel Alloy for Engine Rotating Parts 33.17 - 1A Engine Fire Protection 33.19 - 1 Guidance Material for 14 CFR §33.19, Durability, for Reciprocating Engine Redesigned Parts 33.27 - 1A Engine and Turbosupercharger Rotor Overspeed Requirements of 14 CFR § 33.27.

33.28 - 1 Compliance Criteria for 14 CFR § 33.28, Aircraft Engines, Electrical and Electronic Engine Control Systems 33.28 - 2 Guidance Material for 14 CFR 33.28, Reciprocating Engine, Electrical and Electronic Engine Control Systems

C-11

09/29/2023 8100.18A

Appendix C

AC Number Change Title Number 33.28 - 3 Guidance Material For 14 CFR § 33.28, Engine Control Systems 33.47 - 1 Detonation Testing in Reciprocating Aircraft Engines 33.63 - 1 Turbine Engine Vibration 33.64 - 1 Guidance for Pressurized Engine Static Parts 33.65 - 1 Surge and Stall Characteristics of Aircraft Turbine Engines 33.70 - 1 Guidance Material for Aircraft Engine Life - Limited Parts Requirements 33.70 - 2 Damage Tolerance of Hole Features in High - Energy Turbine 33.74/92 - 1B Turbine Engine Continued Rotation and Rotor Locking 33.75 - 1A 1 Guidance Material For 14 CFR 33.75, Safety Analysis 33.76 - 1A Bird Ingestion Certification Standards 33.78 - 1 Turbine Engine Power - Loss and Instability in Extreme Conditions of Rain and Hail 33.83 - 1 Comparative Method to Show Equivalent Vibratory Stresses and High Cycle Fatigue Capability for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts 33.87 - 1A Engine Over torque Test, Calibration Test, Endurance Test, and Teardown Inspection for Turbine Engine Certification (§§ 33.84, 33.85, 33.87, 33.93) 33.87 - 2 Comparative Endurance Test Method to Show Durability for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts 33.90 - 1A Initial Maintenance Inspection (IMI), 14 CFR 33.90, Test for Turbine Engines 33.91 - 1 Engine System and Component Tests 33.201 - 1 Extended Operations (ETOPS) Eligibility for Turbine Engines 33 - 2C General Type Certification Guidelines for Turbine Engines 33 - 5 Turbine Engine Rotor Blade Containment/Durability 33 - 6 1 Weld Repair of Aluminum Crankcases and Cylinders of Piston Engines 33 - 7A Guidance for 30 - Second and 2 - Minute One - Engine - Inoperative (OEI) Ratings for Rotorcraft Turbine Engines 33 - 8 Guidance for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts under Test and Computation 33 - 9 Developing Data for Major Repairs of Turbine Engine Parts 33 - 11 Oxidation, Hot Corrosion, Thermal Fatigue, and Erosion Characteristics Testing to Support 14 CFR, Part 33, § 33.15, Compliance for Turbine Engines 33 - 83A Turbine Engine Vibration Test 34 - 1B Fuel Venting and Exhaust Emission Requirements for Turbine Engine Powered Airplanes 35.4 - 1 Propeller Instructions for Continued Airworthiness

C-12

09/29/2023 8100.18A

Appendix C

AC Number Change Title Number 35.16 - 1 Propeller Critical Parts 35.23 - 1 Guidance Material for 14 CFR § 35.23, Propeller Control System 35.37 - 1B Propeller Fatigue Limits and Evaluation 35 - 1 Certification of Propellers 39 - 8 Continued Airworthiness Assessments of Powerplant and Auxiliary Power Unit Installations of Transport Category Airplanes 39 - 10 Alternative Methods of Compliance 45 - 2E Identification and Registration Marking 45 - 3A Installation, Removal or Change of Identification Data and Identification Plates on Aircraft Engines 45 - 4 Identification, marking, and placarding of aircraft issued special airworthiness certificates in the light - sport category (S - LSA) and aircraft issued experimental certificates for the purpose of operating light - sport aircraft (E - LSA) 91 - 33A Use of Alternate Grades of Aviation Gasoline for Grade 80/87, and Use of Automotive Gasoline 91 - 56B Continuing Structural Integrity Program for Airplanes 91 - 62A Use of Child Seats in Aircraft 91 - 82A 1 Fatigue Management Programs for In - Service Issues 121 - 6 Portable Battery - Powered Megaphones 120 - 73 Damage Tolerance Assessment of Repairs to Pressurized Fuselages 120 - 93 Damage Tolerance Inspections for Repairs and Alterations 120 - 94 Aircraft Electrical Wiring Interconnection Systems Training Program 120 - 97A 1 Incorporation of Fuel Tank System Instructions for Continued Airworthiness into Operator Maintenance or Inspection Programs 120 - 98A 1 Operator Information for Incorporating Fuel Tank Flammability Reduction Requirements into a Maintenance or Inspection Program 120 - 102A Incorporation of Electrical Wiring Interconnection Systems Instructions for Continued Airworthiness into an Operator’s Maintenance Program 120 - 104 Establishing and Implementing Limit of Validity to Prevent Widespread Fatigue Damage 121.321 - 1 Compliance with Requirements of § 121.321, Operations in Icing 187 - 2 Aircraft Certification Service Fees for Providing Production Certification - Related Services Outside of the United States

C-13

09/29/2023 8100.18A

Appendix C

Policy Number Title 01/115/36 Seat Technical Standard Order Authorization and Installation Assessment 97 - 111 - 34 Installation of In - Seat Power Supply Systems (ISPSS) for Portable Electronic Devices (PED) 97 - 113 - 143 Standards for Cargo or Baggage Compartments 98 - 112 - 24 Halon Concentration Levels 2001 - 02 - 05 Guidance on Adhesive Approval for use in CAR/FAR Type Certificated Wooden Airplanes 8100.8D_20120228 Deviation to FAA Order 8100.8D for use of FAA Form 8110 - 14, Statement of Qualifications ACE - 00 - 23.561 - 01 Issuance of Policy Statement, Methods of Approval of Retrofit Shoulder Harness Installations in Small Airplanes ACE - 110_19971201 Certification of Small, Single - Engine Piston or Turbopropeller Airplanes Used for Special Purpose Agricultural Operations AIR - 2_2013 - 06 - 27 Deviation to Federal Aviation Administration (FAA) Order 8120.23, Certificate Management of Production Approval Holders AIR - 6B0 - 18 - 6B0 - DM415 AC 20 - 165B General Memo AIR - 100 - 11 - 100 - 001 Training Requirements for Major Repairs and/or Major Alt erations Approval Authority AIR - 100_12 - 09 - 25 Deviation Approval for Issuance of Appliance Airworthiness Directives (AD) AIR - 100_12 - 10 - 11 Conduct Certain Ground Tests without a Type Inspection Authorization (TIA) AIR - 100 - 12 - 110 - 002 Approval of Temperature Controlled Shipping Containers (Non - ULD), Revision 2.1 AIR100 - 13 - 110 - 800 Newly Revised FAA Forms 8110 - 9, Type Certificate, and 8110 - 2, Supplemental Type Certificate AIR100 - 13 - 110 - 801 Guidance for Mandatory Continuing Airworthiness Information (MCAI) Worksheet AIR - 100 - 14 - 110 - DM03 Deviation from Designated Engineer Representative (DER) Qualification Requirements in FAA Order 8100.8 for Former FAA Flight Test Pilots AIR100 - 14 - 110 - DM07 Deviation to Federal Aviation Administration (FAA) Order 813 0.34C Authorizing Certain Designated Airworthiness Representatives (DAR) to Issue Special Airworthiness Certificates in the Experimental Category at Unmanned Aircraft System (UAS) Test Ranges Established by Public Law 112 - 95 AIR100 - 14 - 110 - DM11 Deviation for Prototype Users of Aviation Safety Knowledge Management Environment (ASKME) Engineering Design and Production Approvals (EDPA) Information Technology (IT) Tool AIR100 - 14 - 110 - DM12 Deviations to Federal Aviation Administrati on (FAA) Order 8130.34C, Appendix A, Operating Limitations for Unmanned Aircraft Systems (UAS), and Aircraft Inspection Procedures AIR100 - 14 - 110 - DM14 Approved Deviation to FAA Order 8110.4C paragraph 3 - 3.e.(20) and Order 8130.2G paragraph 306.f.(2).

AIR1 00 - 14 - 110 - DM22 Deviation to Federal Aviation Administration (FAA) Order 8130.34C regarding the Issuance of a Certificate of Waiver or Authorization (COA) for compliance with Title 14, Code of Federal Regulations (14 CFR) 91.113, Right - of - way rules: Except water operations AIR100 - 14 - 110 - GM12 Clarification: FAA Order 8130.2G Change 1, Airworthiness Certification of Aircraft and Related Products, paragraph 4039 and 4082 AIR100 - 14 - 110 - GM26 PMA combination of non - related previously approved articles or kits AIR100 - 14 - 110 - PM05 Revised Policy on Focal Point ACOs For Restricted Category/Military Surplus Aircraft AIR100 - 14 - 110 - PM06 Revised Policy to Order 8130.2G paragraph 4102 n ( 1) regarding Canadian Amateur - Built Aircraft AIR100 - 14 - 140 - DM06 Deviation t o FAA Order 8100.8D, Designee Management Handbook, Chapter 8, for former designees.

C-14

09/29/2023 8100.18A

Appendix C

Policy Number Title AIR100 - 14 - 140 - DM10 Deviation to FAA Order 8040.5, Removal of MCAI Metrics AIR100 - 14 - 140 - DM13 Deviation to Federal Aviation Administration (FAA) Order 8120.23, Certificate Management of Production Approval Holders, Appendix I, Preparation Instructions for FAA Form 8100 - 6, Noncompliance Record, and FAA Order 8120.22, Production Approval Procedures AIR100 - 16 - 110 - DM04 Issuance of the Authorized Release Certificate, FAA Form 8130 - 3, Airworthiness Approval Tag and PAH Issuance of Authorized Release Documents for Export AIR100 - 16 - 130 - GM18 Engineering Considerations for Powder Bed Fusion Additively Manufactured Parts AIR100 - 2010 - 001 Authorization and Deleg ation of Functions Related to the Fuel Tank Flammability Reduction Rule AIR100 - 2010 - 120 - 003 Acceptance of Composite Specification and Design Values Developed using the NCAMP Process AIR - 100 - EWIS - 4 - 6 - 10 Approval of Electrical Wiring Interconnection System AIR600 - 19 - 600 - DM01 Deviation to FAA Orders and Policy to Address Training, Oversight, and Renewal Requirement Due Dates for Certain Designees Impacted by the December 2018 Lapse in FAA Funding AIR600 - 19 - DM125 Deviation to FAA Order 8130.2J to Allow for the Issuance of Transferable Special Flight Permits for Production Flight Testing to a Manufacturer of Light Sport Aircraft AIR600 - 20 - 6C0 - DM134 Deviation from FAA Order 8130.2J for the issuance of Special Flight Permits (SFP) AIR600 - 20 - 600 - DM01 Devia tion to FAA Order 8120.22A, Production Approval Procedures AIR - 600 - 20 - 600 - PM04 Guidance on Congressional Mandate for Rotorcraft Crash Resistant Fuel Systems AIR600 - 21 - 600 - DM02 Deviation to Order 8110.118, Commercial Parts, to Facilitate Use of Commercial Parts for Low - Risk Unmanned Aircraft Systems AIR600 - 21 - 630 - DM08 Deviation to FAA Order 8130.2J regarding FAA Form 8100 - 1, Special Flight Authorization (SFA) Application Numbering, and FAA Form 8130 - 4 AIR600 - 21 - 630 - GM05 Clarification of Policies and Procedures Concerning Certain Statements of Conformity from Aircraft Manufacturers AIR600 - 21 - 630 - GM07 Revision of Statements in "Import Requirements" Section of Type Certificate Data Sheets (TCDS) AIR600 - 21 - 630 - GM11 CLARIFICATION: Memo No. AIR600 - 21 - 630 - DM13 AIR600 - 21 - AIR - 600 - PM04 - Guidance on the Implementation of the Aircraft Certification, Safety, and Accountability Act, Section R1 116(b), Flight Crew Alerting AIR - 600 - 22 - 600 - GM02 Cancellation of Advisory Circular AC 33.65 - 1, Surge and Stall Characteri stics of Aircraft Turbine Engines AIR - 600 - 22 - 600 - GM03 Cancellation of Policy Statement PS - ANE100 - 1999 - 00009, Methods of Compliance for Title 14 of the Code of Federal Regulations (14 CFR) Parts 33.51 Operation Test AIR600 - 22 - 600 - PM03 Clarification on FAA Approval of Repair Specifications AIR - 600 - 22 - 630 - GM01 Notice of Decommissioning of the Regulatory and Guidance Library (RGL) and Transition to the Dynamic Regulatory System (DRS) AIR600 - 22 - 634 - DM08 Deviation Extending Delegated Engineering Representatives (DER) Expiration Dates in the Designee Information Network (DIN) in Order to Facilitate the Transition to the Designee Management System (DMS) AIR600 - 22 - 634 - PM03 Guidance for the Issuance of a Special Flight Authoriza tion (SFA) for an Unmanned Aircraft System (UAS), Optionally Piloted Aircraft (OPA), or an OPA/UAS AIR - 600 - 22 - DM13 Clarification to FAA Order 8000.95B, Designee Management Policy, Volume 8, DMIR and DAR - F Designee Policy, for production conformity

C-15

09/29/2023 8100.18A

Appendix C

Policy Number Title AIR - 60 0 - 22 - GM05 Authorization to Issue an Experimental Airworthiness Certificate Outside the United States AIR - 600 - FY22 - 630 - 11 Deviation to FAA Order 8000.95, Designee Management Policy, Volume 8, DMIR and DAR - F Designee Policy, Chapter 4.

AIR600 - FY22 - 630 - DM02 Deviation from FAA Order 8110.37F, DER Handbook AIR - 600 - FY22 - 630 - DM05 Deviation to FAA Order 8120.23A to Extend FY22 End - of - Cycle Due Dates and Qualification Currencies for On - Site Quality System Audits Due to the Rise in COVID - 19 Cas es AIR600 - FY22 - 630 - DM07 Deviations to FAA Order 8130.2J, Airworthiness Certification of Aircraft, Concerning Electronic ASKME Airworthiness Certification AIR - 600 - FY22 - 630 - DM09 Deviation to FAA Order 8130.34D, Airworthiness Certification of Unmanned Aircraft Systems and Optionally Piloted Aircraft, to Remove AUS - 420 from the Airworthiness Certification Process AIR - 600 - FY22 - 630 - DM10 Deviation to FAA Order 8130.34D, Airworthiness Certification of Unmanned Aircraft Systems and Optionally Pilote d Aircraft to Update Operating Limitation 26 AIR600 - FY22 - 630 - PM06 Correction of the term “natural person” in FAA Order 8130.2J, Airworthiness Certification of Aircraft, paragraph 15 - 2 AIR600 - FY22 - 632 - DM04 Deviation to FAA Order 8130.2J, Airworthiness Certification of Aircraft to allow the issuance of a single FAA Form 8130 - 7, Special Airworthiness Certificate for Pipistrel Sinus Flex, serial number 565 SFN 912 LSA AIR - 630 - 22 - DM15 Deviation to 8110.4C, Type Certification, relating to the retention of FAA files to aid the transfer of Type Certificates and Supplemental Type Certificates AIR630_2020 - 12 - 21 Minor Revisions to Operating Limitations in FAA Order 8130.34 AIRl00 - 17 - 110 - GM01 Cancellation of FAA Order 1110.133, Certification Proces s Study (CPS) Response Aviation Rulemaking Committee ANM - 01 - 04 System Wiring Policy for Certification of Part 25 Airplanes.

ANM - 01 - 111 - 165 Policy Statement on Certification of Power Supply Systems for Portable Electronic Devices on Part 25 Airplanes ANM - 03 - 115 - 31 Conducting Component Level Tests to Demonstrate Compliance with 25.785(b) and (d) ANM - 08 - 113 - 001 Payload Capacity Definition in Design Approval Holder Rules AVP - 300 - 15 U.S. State U.S. State Safety Program Safety Program AVS - 20 21 - PM02 FAA Assignment of Advisors for Organization Designation Authorization (ODA) Engineering and Flight Test Unit Members (UM) at Boeing, General Electric, and Pratt & Whitney AVS - 2022 - 01 Transfer of Authority to Manage AVS Delegation Policy in Orders VS 1100.2, 8000.95, 8100.8, and 8100.15 and Related IT Tools to AVS - 60 PS - AIR - 20 - 1902 Reducing Incorrect Connections of Electrical and Plumbing Components of Fire Detection, Suppression, and Extinguishing Systems

C-16

09/29/2023 8100.18A

Appendix C

Policy Number Title PS - AIR - 25 - 33 Occupant Injury Considerations for Dual Pilot Head Up Display (HUD) Installations PS - AIR - 33.27 - 02 Turbine, Compressor, Fan, and Turbosupercharger Rotor Overspeed Engine Control Systems, 14 CFR § 33.27(c) & (e) PS - AIR100 - 2006 - MMPDS Metallic Materials Properties Developme nt and Standardization (MMPDS) Handbook PS - AIR - 100 - 2007 - 12 - 27B Enhanced Airworthiness Program for Airplane Systems (EAPAS) Supplemental Type Certificate (STC) limitation PS - AIR - 100 - 2009 - 05 - 27 Adding Part 26 to Type Certificate Data Sheets and Supplemental Type Certificates PS - AIR - 100 - May - 4 - 2010 Authorization and Delegation of Functions Related to the Enhanced Airworthiness Program for EAPAS FTS Airplane Systems/Fuel Tank Safety Rule (EAPAS/FTS) PS - ANE - 2003 - 35 - 1 - R0 Propeller Ice Protection Equ ipment PS - ANM - 01 - 02 Type Certification Assessment of Thrust Management Systems PS - ANM - 25.853 - 01 - R2 Flammability Testing of Interior Materials PS - ANM - 25.981 - 02 Policy on Issuance of Special Conditions and Exemptions Related to Lightning Protection of Fue l Tank Structure and Systems PS - ANM - 25 - 08 Application of AC 20 - 170, Integrated Modular Avionics Development, Verification, Integration, and Approval Using RTCA/DO - 297 and Technical Standard Order - C153.

PS - ANM - 25 - 20 High - Energy Wide - Area Blunt Impact for Composite Structures PS - ANM - 25 - 32 Certification of Cargo Projects PS - ANM100 - 01 - 03A Factors to Consider when Reviewing an Applicant's Proposed Human Factors Methods of Compliance for Flight Deck Certification PS - ANM100 - 02 - 115 - 20 Corded Electri cal Devices Used in the Passenger Cabin PS - ANM100 - 00034 Requested Guidance Material for Certification of Slides and Slide/rafts (FAR 25.809) PS - ANM100 - 00037 Yaw Angle for the Down Test in Dynamic Seat Test, 25 .562 PS - ANM100 - 1981 - 00022 Separation of Control Systems PS - ANM100 - 1981 - 00046 Policy Concerning Substantiation of Control Surface Tabs for FAR 25.629(d) and 25.629(d)(4)(vi); ASW - 210 ltr of 2 - 5 - 81 PS - ANM100 - 1982 - 00124 Interpretation of FAR 25.801 (d), Ditching Approvals of transport Airplanes

C-17

09/29/2023 8100.18A

Appendix C

Policy Number Title PS - ANM100 - 1983 - 00043 Flyable Crack Limits in Primary Structures PS - ANM100 - 1983 - 00101 Flyable Crack Limits in Primary Structures PS - ANM100 - 1984 - 00039 Failsafe Tab Control Systems, FAR 25.629 PS - ANM100 - 1985 - 00017 Definition of Terms Used in FAR 25.1439 PS - ANM100 - 1985 - 00030 Life raft Requirements for Transport Category Airplanes PS - ANM100 - 1986 - 00055 Structural Integrity Limits in Primary Aircraft Structure PS - ANM100 - 1987 - 00016 Fire Containmen t Testing of Special Purpose Waste Receptacles PS - ANM100 - 1987 - 00031 Location of Passenger Center of Gravity Above the Compressed Seat Cushion for Compliance With 25.561 and TSO - C39 PS - ANM100 - 1987 - 00033 Passenger capacities for combi airplanes with only one pair of exits PS - ANM100 - 1987 - 00052 Rapid Decompression into Normally Unpressurized Areas PS - ANM100 - 1988 - 00040 FAA Policy with Respect to Damage Tolerance of Engine Mounts PS - ANM100 - 1989 - 00044 Guidance Concerning Continued Operational Safety and Airworthiness Directives (AD) PS - ANM100 - 1989 - 00048 Policy Regarding Impact of Modifications and Repairs on the Damage Tolerance Characteristics of Transport Category Airplanes PS - ANM100 - 1990 - 00042 Additional Guidance Concerning Continued Operational Safety and Airworthiness Directives (AD ).

PS - ANM100 - 1991 - 00024 Access to Emergency Exits PS - ANM100 - 1991 - 00025 Access to Type III Emergency Exits PS - ANM100 - 1991 - 00029 Guidance for Incubators and Emergency Equipment PS - ANM100 - 1991 - 00049 Policy Regarding Material Strength Properties and Design Values, 25 .613.

PS - ANM100 - 1992 - 00045 Interpretation of FAA requirements concerning special structural factors for transport airplane interior components PS - ANM100 - 1992 - 00050 Policy regarding open drill holes in primary fuselage structure. Ref. Detroit FSDO - Recommendation for Accident Prevention 90 - 203.

C-18

09/29/2023 8100.18A

Appendix C

Policy Number Title PS - ANM100 - 1993 - 00015 Guidance on Passenger Cabin Fire Extinguishers PS - ANM100 - 1993 - 00023 Acceptance o f Technical Standard Order ( TSO) Holder's Data for Compliance with Part 25 Dynamic Testing Requirements.

PS - ANM100 - 1993 - 00027 Compliance with the Requirements of 25.811 (c) PS - ANM100 - 1993 - 00047 Policy regarding fail - safe features of structures designed to the damage tolerance requirements of 25 .571 PS - ANM100 - 1993 - 00054 Revision of Multiple Burst Lightning Environment PS - ANM100 - 1994 - 00028 Video monitors PS - ANM100 - 1994 - 00032 Modifying the guidan ce in Advisory Circular (AC) 25 - 17 "Transport Airplane Cabin Interiors Crashworthiness Handbook" PS - ANM100 - 1994 - 00035 Seat Strength Policy Regarding 25 .562 PS - ANM100 - 1994 - 00059 Engine Inoperative Ten - Minute Takeoff Thrust/Power Rating (Revision to 6/28/94 Memorandum) PS - ANM100 - 1995 - 00020 Policy regarding flight control jams for "normally encountered positions ” 25.671 (c)(3) PS - ANM100 - 1995 - 00058 Go - Around Power/Thrust Settings on Transport Category Airplanes PS - ANM100 - 1995 - 00104 The Role of Maintenance Computers in Exposure Time Assumptions for Quantitative Safety Analyses PS - ANM100 - 1996 - 00036 Slide Cold Soak Test Protocol PS - ANM100 - 1996 - 00121 FAA Policy Concerning Use of Dynamically Tested Seats in New or Modified Transport Category Airplanes PS - ANM100 - 1996 - 00128 Simplified Procedure for Addressing the Head Injury Criteria of 25 .562 PS - ANM100 - 1997 - 00111 Unusable Fuel Quantity for Gulfstream GV PS - ANM100 - 1997 - 00122 Guidance for Demonstrating Compliance with Seat Dynamic Testing Deceleration Pulse Shapes PS - ANM100 - 1997 - 00127 Side - Facing Seats on Transport Category Airplanes PS - ANM100 - 1999 - 00021 Requirements of FAR 25.1357(e) PS - ANM100 - 1999 - 00026 Additional Guidance on Seat Dyna mic Testing

C-19

09/29/2023 8100.18A

Appendix C

Policy Number Title PS - ANM100 - 1999 - 00062 Airplane Operation with Air Conditioning Packs - Off PS - ANM100 - 2000 - 00103 Certification Options for Class E Cargo Compartments on Aircraft having a Volume of 800 ft or less PS - ANM100 - 2000 - 00118 Use of the Aircraft Materials Fire Test Handbook PS - ANM100 - 2000 - 00123 Guidance for Demonstrating Compliance with Seat Dynamic Testing for Plinths and Pallets PS - ANM100 - 2001 - 00109 Ram Air Turbine (RAT) Approval PS - ANM100 - 2001 - 115 - 11 Certification of Strengthened Flightdeck Doors on Transport Category Airplanes PS - ANM100 - 2001 - 116 Policy Statement with respect to All Electrical Attitude, Altitude, Direction and Airspeed Systems using Battery Standby Power PS - ANM100 - 2002 - 00120 Compliance Questions and Answers with Respect to SFAR No. 88, Fuel Tank Safety, for Transport Category Airplanes PS - ANM110 - 1998 - 00061 Wording Change to AC ARS Airplane/Rotorcraft Flight Manuals PS - ANM110 - 1999 - 115 - 99 - Transport Airplane Directorate Policy Regarding Methods Used to Determine the Likelihood of 22 Catastrophic Failure Events PS - ANM110 - 2001 - 115 - 32 Policy Statement with respect to use of Industry Standards in Seat Certification PS - ANM111 - 1999 - 99 - 2 Guidance for Reviewing Certification Plans to Address Human Factors for Certification of Transport Airplane Flight Decks Vision 100 - Century of Vision 100 - Century of Aviation Reauth orization Act of 2003 Aviation

C-20

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C1e Cargo Compartment Fire Detection Instruments TSO - C2 d Airspeed Instruments TSO - C3e Turn a nd Slip Instrument TSO - C4 c Bank and Pitch Instruments TSO - C5 f Direction Instrument, Non - Magnetic (Gyroscopically Stabilized) TSO - C6e Direction Instrument, Magnetic (Gyroscopically Stabilized) TSO - C7d Direction Instrument, Magnetic Non - Stabilized Type (Magnetic Compass) TSO - C8e Vertical Velocity Instruments (Rate - Of - Climb) TSO - C10c Pressure Altimeter System TSO - C11e Powerplant Fire Detection Instruments (Thermal and Flame Contact Types) TSO - C13g Life Preservers TSO - C14b Aircraft Fabric, Intermediate Grade TSO - C15d Aircraft Fabric, Grade A TSO - C16b Electrically Heated Pitot a nd Pitot - Static Tubes TSO - C19C Portable Water Solution Type Hand Fire Extinguisher TSO - C20a Combustion Heaters a nd Accessories TSO - C21b Aircraft Turnbuckle Assemblies a nd/ o r Turnbuckle Safe tying Devices TSO - C22g Safety Belts TSO - C23f Personnel Parachute Assemblies a nd Components TSO - C25a Aircraft Seats a nd Berths (Type I Transport, 6g Forward Load)

C-21

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C26d Aircraft Wheels, Brakes a nd Wheel/Brake Assemblies f or Parts 23, 27 And 29 Aircraft TSO - C27 b Twin Seaplane Floats TSO - C28 Aircraft Skis TSO - C30c Aircraft Position Lights TSO - C34e I I s Glide Slope Receiving Equipment Operating Within the Radio Frequency Range Of 328.6 - 335.4 Megahertz ( MHz ) TSO - C35d Airborne Radio Marker Receiving Equipment TSO - C36e Airborne I I s Localizer Receiving Equipment Operating Within the Radio Frequency Range Of 108 - 112 Megahertz ( MHz ) TSO - C39b Aircraft Seats a nd Berths TSO - C39c 9g Transport Airplane Seats Certified by Static Testing TSO - C40c V OR Receiving Equipment Operating Within the Radio Frequency Range Of 108 - 117.95 Megahertz ( MHz ) TSO - C41d Airborne Automatic Direction Finding (A DF ) Equipment TSO - C42 Propeller Feathering Hose Assemblies TSO - C43d Temperature Instruments TSO - C44c Fuel Flowmeters TSO - C45b Manifold Pressure Instruments TSO - C46a Maximum Allowable Airspeed Indicator Systems TSO - C47a Fuel, Oil, And Hydraulic Pressure Instruments TSO - C48a Carbon Monoxide Detector Instruments TSO - C49b Electric Tachometer: Magnetic Drag (Indicator a nd Generator) TSO - C54 Stall Warning Instruments

C-22

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C55a Fuel a nd Oil Quantity Instruments TSO - C56b Engine Driven Direct Current Generator / Starter Generators TSO - C59b Airborne Selective Calling (S ELCAL ) Equipment TSO - C62e Aircraft Tires TSO - C63f Airborne Weather Radar Equipment TSO - C64b Passenger Oxygen Mask Assembly, Continuous Flow TSO - C66c Distance Measuring Equipment (D ME ) Operating Within the Radio Frequency Range Of 960 - 1215 Megahertz TSO - C69c Emergency Evacuation Slides, Ramps, Ramp/Slides, And Slide/Rafts TSO - C70b Life Rafts TSO - C71 Airborne Static ("Dc to Dc") Electrical Power Converter (For Air Carrier Aircraft) TSO - C72c Individual Fl otation Devices TSO - C73 Static Electrical Power Inverter TSO - C74d Air Traffic Control Radar Beacon System (A TCRBS ) Airborne Equipment TSO - C76b Fuel Drain Valves TSO - C77b Gas Turbine Auxiliary Power Units TSO - C78a Crewmember Demand Oxygen Mask TSO - C79 Fire Detectors (Radiation Sensing Type) TSO - C80 Flexible a nd Oil Cell Material TSO - C85b Survivor Locator Lights TSO - C87a Airborne Low - Range Radio Altimeter

C-23

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C88b Automatic Pressure Altitude Reporting Code - Generating Equipment TSO - C89a Crewmember Oxygen Regulators, Demand TSO - C90d Cargo Pallets, Nets a nd Containers (Unit Load Devices) TSO - C90e Unit Load Devices TSO - C92c Airborne Ground Proximity Warning Equipment TSO - C93 Airborne Interim Standard Microwave Landing System Converter Equipment TSO - C95a Mach Meters TSO - C96a Anticollision Light Systems TSO - C96b Anticollision Light Systems TSO - C99a Flight Deck (Sedentary) Crewmember Protective Breathing Equipment TSO - C100c Aviation Child Safety Device (A CSD ) TSO - C101 Over Speed Warning Instruments TSO - C102 Airborne Radar Approach a nd Beacon Systems for Helicopters TSO - C103 Continuous Flow Oxygen Mask Assembly (For Non - Transport Category Aircraft) TSO - C104 Microwave Landing System (M LS) Airborne Receiving Equipment TSO - C105 Optional Display Equipment for Weather and Ground Mapping Radar Indicators TSO - C106a Air Data Computer TSO - C109 Airborne Navigation Data Storage System TSO - C110a Airborne Passive Thunderstorm Detection Equipment TSO - C112f Air Traffic Control Radar Beacon System/Mode Select (A TCRBS /Mode S) Airborne Equipment

C-24

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C113b Airborne Multipurpose Electronic Displays TSO - C114 Torso Restraint Systems TSO - C115d Required Navigation Performance (R NP ) Equipment U sing Multi - Sensor Inputs TSO - C116a Crewmember Portable Protective Breathing Equipment TSO - C117b Airborne Windshear Warning a nd Escape Guidance Systems f or Transport Airplanes TSO - C118a Traffic Alert a nd Collision Avoidance System ( TCAS ) Airborne Equipment, TCAS I TSO - C119e Traffic Alert a nd Collision Avoidance System ( TCAS ) Airborne Equipment, TCAS I I with Hybrid Surveillance TSO - C121b Underwater Locating Devices (Acoustic) (Self - Powered) TSO - C122a Equipment That Prevents Blocked Channels Used in Two - Way Radio Communications Due to Simultaneous Transmissions TSO - C123c Cockpit Voice Recorder Equipment TSO - C124c Flight Data Recorder Equipment TSO - C126c 406 MHz Emergency Locator Transmitters ( ELTS ) TSO - C127c Rotorcraft, Transport Airplane, And Small Airplane Seating Systems TSO - C128a Equipment That Prevents Blocked Channels Used in Two - Way Radio Communications Due to Unintentional Transmissions TSO - C132a Minimum Operational Performance Standards f or Geosynchronous Orbit Aeronautical Mobile Satellite Services ( AMSS ) Avionics TSO - C132b Minimum Operational Performance Standards f or Geosynchronous Orbit Aeronautical Mobile Satellite Services ( AMSS ) Avionics TSO - C135a Transport Airplane Wheels a nd Wheel a nd Brake Assemblies TSO - C137a Aircraft Portable Megaphones TSO - C139a Aircraft Audio Systems a nd Equipment TSO - C140 Aerospace Fuel, Engine Oil, And Hydraulic Fluid Hose Assemblies

C-25

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C141 Aircraft Fluorescent Lighting Ballast/Fixture Equipment TSO - C142b Non - Rechargeable Lithium Cells a nd Batteries TSO - C144a Passive Airborne Global Navigation Satellite System ( GNSS ) Antenna TSO - C145e Airborne Navigation Sensors Using the Global Positioning System Augmented by The Satellite Based Augmentation System ( SBAS ) TSO - C146e Stand - Alone Airborne Navigation Equipment Using the Global Positioning System Augmented by The Satellite Based Augmentati on System ( SBAS ) TSO - C147a Traffic Advisory System (T AS ) Airborne Equipment TSO - C148 Aircraft Mechanical Fasteners TSO - C149 Aircraft Bearings TSO - C150a Aircraft Seals TSO - C151d Terrain Awareness a nd Warning Systems (T AWS ) TSO - C153a Integrated Modular Avionics (Ima) Platform a nd Modules TSO - C154d Universal Access Transceiver (U AT ) Automatic Dependent Surveillance - Broadcast (Ads - B) Equipment Operating on Frequency Of 978 MHz TSO - C155b Recorder Independent Power Supply (Rips) TSO - C157d Aircraft Flight Information Services - Broadcast (FIS - B) Data Link Systems and Equipment TSO - C158 Aeronautical Mobile High Frequency Data Link (HFDL) Equipment TSO - C159e , Next Generation Satellite Systems (NGSS) Equipment CHG 1 TSO - C160a Very Hi gh Frequency (Vhf) Digital Link (VDL) Mode 2 Communications Equipment TSO - C161b Ground Based Augmentation System Positioning and Navigation Equipment TSO - C162b Ground Based Augmentation System Very High Frequency Data Broadcast Equipment TSO - C163a VDL Mode 3 Communications Equipment Operating Within the Frequency Range 117.975 - 137.000 Megahertz

C-26

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C164a Night Vision Goggles TSO - C165b Electronic Map Display Equipment for Graphical Depiction of Aircraft Position (Own - Ship) TSO - C166c Extended Squitter Automatic Dependent Surveillance - Broadcast (Ads - B) And Traffic Information Service - Broadcast (Tis - B) Equipment Operating on The Radio Frequency Of 1090 Megahertz ( MHz ) TSO - C167 Personnel Carrying Device Systems (PODS), Also Known as Human Harnesses TSO - C168 Aviation Visual Distress Signals TSO - C169a Vhf Radio Communications Transceiver Equipment Operating Within Radio Frequency Range 117.975 To 137.000 Megahertz TSO - C170 High Frequency (Hf) Radio Communications Transceiver Equipment Operating Within the Radio Frequency Range 1.5 To 30 Megahertz TSO - C171 Aircraft Clamps TSO - C172a Cargo Restraint Strap Assemblies TSO - C173a Nickel - Cadmium, Nickel Metal - Hydride, And Lead - Acid Batteries TSO - C174 Battery Based Emergency Power Unit (BEPU) TSO - C175 Galley Cart, Containers and Associated Components TSO - C176a Cockpit Image Recorder Equipment TSO - C177a Data Link Recorder Equipment TSO - C178a Aircraft Circuit Breakers TSO - C179b Rechargeable Lithium Batteries and Battery Systems.

TSO - C184 Airplane Galley Insert Equipment, Electrical/Pressurized TSO - C190 Active Airborne Global Navigation Satellite System (GUSS) Antenna TSO - C194 Helicopter Terrain Awareness and Warning System (HTAWS) TSO - C195 c Avionics Supporting Automatic Dependent Surveillance - Broadcast (ADS - B) Aircraft Surveillance Applications (ASA)

C-27

09/29/2023 8100.18A

Appendix C

TSO Title TSO - C196b Airborne Supplemental Navigation Sensors for Global Positioning System Equipment Us ing Aircraft - Based Augmentation TSO - C197 Information Collection and Monitoring Systems TSO - C198 Automatic Flight Guidance and Control System (AFGCS) Equipment TSO - C199 Traffic Awareness Beacon System (Tabs) TSO - C200a Airframe Low Frequency Underwater Locating Device (Acoustic) (Self - Powered) TSO - C201 Attitude and Heading Reference Systems (AHRS) TSO - C202 Cargo Stopper Devices TSO - C203 Fire Containment Covers (FCC) TSO - C204a Circuit Card Assembly Functional Sensors Using Satellite - Based Augmentation System (SBAS) For Navigation and Non - Navigation Position/Velocity/Time Output.

TSO - C205a Circuit Card Assembly Functional Class Delta Equipment Using the Satellite - Based Augmentat ion System for Navigation Applications.

TSO - C206 Circuit Card Assembly Functional Sensors Using Aircraft - Based Augmentation for Navigation and Non - Navigation Position/Velocity/Time Output.

TSO - C207 b Aeronautical Mobile Airport Communication System (AEROM ACS) Airborne Mobile Station (AMS) Equipment TSO - C209 Electronic Flight Instrument System (EFIS) Display TSO - C210 Airborne Head Up Display (HUD) TSO - C211 Detect and Avoid (DAA) Systems TSO - C212 Air - To - Air Radar (ATAR) For Traffic Surveillance TSO - C213a Unmanned Aircraft Systems Control and Non - Payload Communications Terrestrial Link System TSO - C214 Functional TSO Equipment Using a TSO - C153A - Authorized Ima Platform(S) and/ Module(s) TSO - C219 Airborne Collision Avoidance System (ACAS) XA/XO TSO - C220 GNSS - Aided Inertial System

C-28

09/29/2023 8100.18A

Appendix C

QMS DOCUMENTS

QMS documents are only applicable to the offices listed in the scope of the document. The C&A

Division Director may authorize changes to QMS documents that are applicable to design

approvals. The SO Division Director may authorize changes to QMS documents that are

appl icable to manufacturing.

Type Number Title QMS process AIR - 001 - 007 AIR Document Control Process QMS Form AIR - 001 - 007 - F1 AIR QMS Document Justification and Approval Form QMS process AIR - 001 - 013 AIR Consistency and Standardization Initiative Process QMS Deviation AIR - 001 - 013 Approved AIR CSI Approved Deviation for managing CSI actions Deviation outside of QMITs QMS work instruction AIR - 001 - 030 - W1 AIR Continued Airworthiness Notification to the International Community (CANIC) QMS Form AIR - 001 - 030 - F1 AIR Continued Airworthiness Notification to the International Community Template QMS process AIR - 002 - 022 Airworthiness Agreements IPA QMS work instruction AIR - 002 - 022 - W2 Interagency Group on International Aviation (IGIA) Coordination QMS work instruction AIR - 002 - 022 - W4 AIR Bilateral Technical Assessment Process QMS work instruction AIR - 002 - 022 - W5 AIR Transfer of U.S. Type Certificates/Supplemental Type Certificates Outside the U.S.

QMS work instruction AIR - 002 - 022 - W7 AI R Response to European Aviation Safety Agency (EASA) Rulemaking QMS work instruction AIR - 002 - 022 - W8 Sharing Sensitive Security Information (SSI) with Foreign Civil Aviation Authorities (FCAA) QMS process AIR - 002 - 023 Developing AIR Advisory Circulars (ACs), Directives and Policy Statements (PSs) QMS process AIR - 002 - 025 AIR Bilateral Relationship Assurance and Standardization System QMS Form AIR - 002 - 025 - F1 AIR Bilateral Relationship Management Feedback Form QMS work instruction AIR - 002 - 033 - W1 AIR Initial Responses to NTSB Safety Recommendations

C-29

09/29/2023 8100.18A

Appendix C

Type Number Title QMS process AIR - 002 - 035 Aircraft Certification Service (AIR) Compliance and Enforcement Process QMS Job Aid AIR - 002 - 035 - JA1 AIR Compliance and Enforcement Process Job Aid QMS work instruction AIR - 002 - 039 - W1 AIR Delegated Signature Authority for Harmonized Rulemaking QMS process AIR - 002 - 043 Aircraft Certification Service Forms Management Process QMS process AIR - 002 - 045 AIR Technical Assistance Agreements QMS work instruction AIR - 002 - 083 - W2 ODA Scorecard Work Instruction QMS work instruction AIR - ACE - 032 - W1 Chicago Aircraft Certification Office Continued Operational Safety Program QMS work instruction AIR - ACE - 115A - 050 - W2 Atlanta ACO Type Inspection Authorization (TIA) Work Instruction QMS work instruction AIR - ACE - 115A - 081 - W1 Atlanta ACO Technical Standard Order Authorization Work Instruction QMS work instruction AIR - ANE - 050 - W1 E&PD Work Instruction for Equivalent Level of Safety Memorandums QMS work instruction AIR - ANE - 071 - W1 ANE Import Procedures for U.S. Standard Airworthiness Certificate QMS work instruction AIR - ANE - 082 - W1 E&PD Type Validation Principles Work Instruction — Process for Creating Standards Difference and Validation Item Lists QMS wo rk instruction AIR - ANE - 110 - 031 - W1 E&PD Special Airworthiness Information Bulletin Work Instruction QMS work instruction AIR - ANM - 004 - W1 Transport Airplane Directorate (TAD) Extension Request for CARs/PARs/NCRs QMS Form AIR - ANM - 030 - F1 Transport Category Airplane AD NPRM Prioritization Form QMS work instruction AIR - ANM - 037 - W1 Transport Airplane Directorate Continued Operational Safety Program QMS Form AIR - ANM - 037 - F1 TAD CARB Meeting Minutes Form QMS work instruction AIR - ANM - 050 - W1 Transport Airplane Issue Paper Development and Approval QMS work instruction AIR - ANM - 050 - W6 Transport Airplane Directorate (TAD) Action Stamp Work Instruction QMS Deviation 860 - 21 - 0004 Deviation to AIR - ANM - 050 - W6

C-30

09/29/2023 8100.18A

Appendix C

Type Number Title QMS work instruction AIR - ANM - 050 - W7 Transport Airplane Directorate (TAD) Administrative Processes for the Reissuance of Type Certificates (TC) and Supplemental Type Certificates (STC) QMS work instruction AIR - ANM - 082 - W1 Creating Standards Differences Lists QMS work instructi on AIR - ANM - 083 - W1 TAD Supervision of ODA QMS work instruction AIR - ASW - 082 - W1 Rotorcraft Directorate Type Validation Work Instruction – Process for Creating Standards Differences Lists QMS work instruction AIR - 700 - CDS - W1 14CFR 21.3/183.63 Report Cloud Storage QMS work instruction AIR - 700 - CPN - W1 Initiation of Certification Project Notification (CPN) QMS work instruction AIR - 700 - TAB - W1 Technical Advisory Board Work Instruction QMS boundaries doc AVS - 001 - 007 - F2 AIR External Document Matrix AVS level QMS Document AVS - 002 - 005 Aircraft Certification and Operational Evaluations

C-31

09/29/2023 8100.18A

Appendix D

Appendix D. Additional Clarification

1. Order 8040.1C, Airworthiness Directives , Order 8040.5 Airworthiness Directive

Process for Mandatory Continuing Airworthiness Information , and IR - M 8040.1C, Airworthiness Directives Manual .

a. Al l references to responsibility for assigning airworthiness directive ( AD ) numbers,

amendment numbers, and the final printing and distribution of all ADs, including the

compilat ion and coordination of the Summary of ADs, focal for the exchange of airworthiness

information with foreign Civil Aviation Authorities, logging all Mandatory Continuing

Airworthiness Information ( MCAI ) into the MCAI national database, maintaining the MCAI

national database, issuing and reviewing MCAI status report and an M C AI open records report, and sending electronic versions of the MCAI and the referenced service information are replaced and understood to be the responsibility of the applicable C&A or I CM Division.

b. The applicable project officer from the Certification Engagement Branch , AIR - 610, will be the project officer involved in AD review and coordination.

c. Order IR - M 8040.1C, c hapter 7, p aragraph 3 : When assigning directorate identifiers

continue to use the two - letter designator for the geographic region of the action office that initiates the AD action.

2. Order 8100.8D, Designee Management Handbook .

Order 8100.8D is now only used as the model and criteria for ODA holders to sele ct unit

members as required by 8100.15B. All other content applicable to individual designee

management is replaced by 8000.95B Designee Management Policy .

3. Order 8100.15B , Change 3 , Organization Designation Authorization Procedures .

Paragraph 16 - 3(c), on page 16 - 1: When assigning ODA numbers , continue to use directorate - based geographic codes.

4. Order 8110.4C, Change 6, Type Certification . Any director or executive director may

authorize a s pecial c ertification r eview .

5. Order 8110.37 F , Designated Engineering Representative (DER) Handbook .

a. Replace ACO with Compliance and Airworthiness (C&A) Division, AIR - 700 or

Integrated Certificate Management (ICM) Division, AIR - 500 , as applicable .

b. The managing branch for FA DERs and FTP DERs is the Fli ght Test & Human Factors

Branch, AIR - 710.

6. Order 8110.100B, Special Airworthiness Information Bulletin . Replace references to AIR

Headquarters with the Policy and Standards (P& S ) Division.

D-2

09/29/2023 8100.18A

Appendix D

7. Order 8120.16A, Suspected Unapproved Parts Program . Replace references to AIR - 100

with AIR - 600.

8. Order 8120.22A, Production Approval Procedures .

a. Directorate Office means the Certificate Management Branch.

b. Directorate Manager means the Division Director of System Oversight Division.

9. Order 8120.23A, Certificate Management of Production Approval Holders . Paragraph

3 - 27(b): When assigning the QSA number use these codes: EB for East Certificate Management

Branch (AIR - 850), CB for Central Certificate Management Branch (AIR - 860), WB for West

Certificate Management Branch (AIR - 870), and CM for System Operation & Oversight Branch

(AIR - 580).

10. Order 8000.95B , Designee Management Po l i cy . The Organization Designation

Authorization ( ODA) Office, AVS - 60, has the authority to revise or cancel material in this order.

AVS - 60 will be responsible for the content of volume 1, and AIR - 600, identified in t able 1 - 1 of the order will remain responsible for the content of volumes 8 and 9 .

11. AC 20 - 6 6B, Propeller Vibration and Fatigue . The directorate project officer will be the responsible project officer from the Policy & Standards (P&S) Division, AIR - 600.

D-2

09/29/2023

8100.18A

Appendix E

Appendix E. Information Technology Tools

Reviewed applications evaluated to receive updates as of April 2023:

1. Accident Lessons Learned (ALL)

2. AIR AITS Cost Center updates

3. AIR Award Tool updates

4. AIR CASTLE/LDR administrative updates

5. AIR FAA Webpage updates

6. AIR Network Drive (AIR Share) changes

7. AIR SharePoint/KSN Site & Dashboard updates

8. AIR Work Tracking System (WTS)

9. Airworthiness Directives Notification System (ADNS)

10. Analyze Safety - Performance Insight - Results Environment (ASPIRE)

11. Aviation Safety Knowledge Management Environment (ASKME) Reporting –

Airworthiness Certification (AWC)

12. ASKME - Airworthiness Directives Development (ADD)

13. ASKME - Aircraft Certification Audit Information System (ACAIS)

14. ASKME - Monitor Safety & Analyze Data (MSAD )

15. ASKME - Risk - Based Resource Targeting (RBRT)

16. ASKME - Work Activity Tracking (WAT)

17. ASKME - Enterprise Services (ES)

18. ASKME - Reporting Center (ARC)

19. ASKME - Compliance and Enforcement Actions (CEA)

20. Certification Project Notification (CPN)

21. Designee Management System (DMS)

22. Engineering Infrastructure Services (EIS)

23. National Automated Conformity Inspection Process (NACIP)

24. National Flight Test Database (NFTDB)

25. Nonconformity and Corrective Action (NCA) Reporting and Tracking (QUASAR)

26. Unmanned Aircraft Systems Declaration of Compliance (UAS DOC)

E-1

09/29/2023 8100.18A

Appendix F

Appendix F. Directive Feedback Information

Please submit any written comments or recommendation for improving this directive or suggest new items or subjects to be added to it. Also, if you find an error, please tell us about it.

Subject: Order 8100.18A, Aircraft Certification Service Organizational Realignment and

Refinement References

To: Directive Management Officer at 9 - AVS - AIR - Directives Management Officer (FAA) ,

(Please mark all appropriate line items)

☐ An error (procedural or typographical) has been noted in parag raph _______ on page

______.

☐ Recommend paragraph _______ on page _______ be changed as follows:

(attach separate sheet if necessary)

☐ In a future change to this order, please include coverage on the following subject:

(briefly describe what you want added.)

☐ Other comments: ☐ I would like to discuss the above. Please contact me.

Submitted by: __________________________________Date: __________________

Telephone Number: __________________Routing Symbol: _________________

FAA Form 1320 - 19 (08/21) Supersedes Previous Edition

F-1