Performance and rotor loads measurements of the Lynx XZ170 helicopter with rectangular blades

Table 8. Concluded. (c)Blade sectional edgewise

and fiatwise radiiofgyration

Section,

Sectional radiiofgyration

r/R

Flatwise, Kx/R Edgewise, Kz/R

0.0000 0.0000E +00 0.0000E +00

0.1252 0.0000E +00 0.0000E +00

0.1252 3.9683E-03 3.9683E - 03

0.1310 3.9683E- 03 3.9683E - 03

0.1353 2.2727E-03 1.3988E - 02

0.1746 2.0176E-03 1.4715E - 02

0.1984 1.8697E-03 1.5215E - 02

0.2075 1.5079E-03 2.9786E -03

0.2135 3.6603E-03 6.0806E - 03

0.2141 5.0818E-03 1.0317E - 02

0.2381 4.8003E-03 1.0595E -02

0.2422 4.4669E-03 1.0166E -02

0.3026 3.2569E - 03 1.5040E - 02

0.3175 3.2367E -03 1.4943E - 02

0.3651 3.1681E - 03 1.4619E - 02

0.3651 3.4053E - 03 1.4674E - 02

0.4365 3.3599E - 03 1.4817E - 02

0.4365 3.3451E -03 1.4829E - 02

0.5131 3.2328E - 03 1.4762E - 02

0.5131 3.2350E - 03 1.4721E - 02

0.5952 3.0746E - 03 1.4695E - 02

0.5952 2.7874E - 03 1.4546E - 02

0.6825 2.7499E - 03 1.4967E - 02

0.6825 2.6981E - 03 1.4967E - 02

0.7579 2.6028E - 03 1.5158E - 02

0.7579 2.5784E - 03 1.5170E - 02

0.8413 2.4680E - 03 1.5177E - 02

0.9206 2.3600E - 03 1.5330E - 02

0.9524 2.4333E - 03 1.4938E - 02

0.9524 3.0017E-03 2.7226E - 02

0.9802 3.0017E - 03 2.7226E -02

0.9802 1.1610E- 03 1.0531E - 02

0.9921 1.1610E - 03 1.0531E - 02

0.9921 1.6948E - 03 1.5371E - 02

1.0000 0.0000E +00 0.0000E +00

Table 9. Linear twistdistribution ofmain-rotor

blade

Radial section, r/R Twist distribution, deg 0.0139 0.00 0.1252 0.00 0.1252 13.75 0.2143 13.75 1.0000 7.46 Table 10. General tail-rotor characteristics Number of blades 4 Nominal tip speed, ft/sec 700 Direction of rotation, viewed from starboard clockwise Radius, ft 3.625 Chord, in. 7.09 Root cutout, ft 1.380 Rotor solidity 0.2076 Lock number 1.752 Blade mass, slug 0.1624 2rid mass moment of inertia, ref.: centerline, slug-ft 2 0.8034 Blade twist angle, deg 0 Airfoil sectional profile NPL9615 Radial location of effective flap hinge, el, in. 2.61 Hap-pitch coupling, 83 (flap up, pitch down), deg 45 Flap stiffness, "1'[,per revolution 1.047 Table 11. Flight test conditions Flight (FLT)487 FLT497 FLT499 FLTS03 FLT504 Cw/O = 0.14 Cw/O = 0.19 Cw/O = 0.16 Cw/O = 0.22 Cw/O = 0.24 Condition Advance ratio r/1

A 0.1092 0.1941 .4 0.1140 0.1640.4 0.1485 .4

B 0.1502 x / 0.2204 0.1589 x/ 0.1741 _/ 0.1914 C 0.1992 .4 0.2423 .4 0.2103 0.2049 .4 0.1873.4 D 0.2445 .4 0.2655 0.2573 .4 0.2023 .4 0.2187 E 0.2908 0.2850 .4 0.3028 0.2305 .4 0.2163 x I F 0.3330 .4 0.3053 .4 0.3291 4 0.2430 4 G 0.3354 0.3195 .4 0.3631 .4 0.2565 .4 H 0.3699 .4 0.3325 .4 0.2696 .4 I 0.3470 .4 J 0.3585 Figure 1. Lynx XZ170 heficopter in hover.

l?

1.31'

-f

i\\

\ 14.47 ° > !

Figure 2. Three-view drawing of the Lynx XZ170 helicopter.

]8

/ X

/

/

\

/ XF o ZF Figure 3. Fuselage and blade coordinate systems.

]9 No1.

No. 2 alternator NO.2 hydraulic pump spur Oil pump spur No. 1 engine Actuated rscho power turbine freewheel spur reduction gearbox Accessory drive through shafts Input gear Freewheel , • _• ,/ shaft Input

_,, .... ,."_\

dlsc No. 2 engine power turbine FORWARD reduction gearbox Intermediate gearbox Figure 4. Three-pinion gearbox transmission system.

2O

lo (a) FW (b) Figure 5. Transmission system. (a) Nodal assignmment. (b) Modeling.

2] Blade sleeve extension

Slide sieevo \

Main rotor \ \ _._.._ head hub \ __ _-A"_.<."_ Figure 6. Main-rotor hub assembly.

, 10.35" _- i(--- 10.63" :__: I , Pitch horn ' ;I Osmper attachment

I

Figure 7. Main-rotor hub.

Pitch- _ _.

control Spider arm Gimbal joint Roller bearings Figure 8. Main-rotor pitch-control mechanism.

I Pitch.

control rod H Spider Collective m_rvo unit Ground Jack Ground lever S_ndle Forked link D Collective beam level Figure 9. Main-rotor collective-control system. Letters refer to table 4.

I Pllch- control rod H Cyclic Spider servo unit arm \ Ground

U

Spindle Jack lever u G Control rod Main-rotor cyclic-control system. Letters refer to table 5.

Figure 10.

.3 NPLM15 .... NPLM17 .2 -- NPLM18 .1 --ol • I , I • I • ! • I --.2 .2 ,4 .6 .8 1,0 x/c Figure 11. Contours of blade airfoil sections NPL9618, NPL9615, and NPL9617 14- 12-

t' lO-

3 8-

! •

g 6- "0 .

e _ 4- 2 - • ! . I • I , I , J .2 .4 .6 .8 1.0 r/R Figure 12 Twist distribution of the main-rotor blade.

0.25 - Flight 504 0'_ 0.23- 0.21

_o_ : ..._ _'n°,_

t= 0.19 U 497 • • • • • _o 0.17 - 499 • • • • • • • 0.15 - 487 • • II • • II • 0.13 I I I I I I I i 0 0.05 0.1 0.15 0.2 0,25 0.3 0.35 0.4 Advance ratio Figure 13. Summary of the flight test conditions.

F F F F F F F F FlatwlN bending E E E E E E E E Edgewise bending '1 ,I =' , J I l I I 0 .25 .5 .75 1.0 r/R Figure 14. Measurement locations of the edgewise and flatwise bending moments on the main-rotor blade.

2?

Appendix A The Lynx XZ170 Helicopter Airfoil Characteristics The Lynx XZI70 Helicopter The three airfoil sections (NPL9615, NPL9617, and This appendix provides information about the aerody- NPL9618) were tested in the 36-by-14-inch Transonic namic characteristics of the fuselage and the airfoil. In Wind Tunnel at the National Physical Laboratory in addition, the calculated rotational frequencies of the main England. For each airfoil section, tables A2 to A4 list the rotor are presented. Although these data are not part of the aerodynamic coefficients as functions of blade angle of flight test results, they are essential for a complete attack (00 and free-stream Mach number (M). The aero- description of the Lynx XZ170 helicopter in correlation dynamic coefficients in tables A3 and A4 were obtained studies.

from static test data, but the data in table A2 were reconstructed from dynamic test data (Holton, 1992). The Aerodynamic Characteristics of the Fuselage blade angle of attack is defined as the angle between the free stream and the chord line.

The fuselage aerodynamic coefficients were obtained from a wind-tunnel test of a l/5-scale model at 11.89 lb/ft 2 with 0 ° sideslip angle. The fuselage model Rotational Frequencies of the Main Rotor included the main-rotor hub without blades. The tests The rotating frequencies of the main-rotor blade were cal- were conducted in a wind tunnel at Westland Helicopters culated in vacuo with Westland's J134 analysis (King, Limited. Table A1 presents the aerodynamic coefficients 1978). Figure A2 shows the calculated blade frequencies as a function of fuselage angle of attack for two configura- plotted as a function of rotor speeds. At the nominal rotor tions: with and without the tail plane installation. These speed, the calculated frequency is 0.646 per revolution for coefficients include lift, drag, side force, and pitching, the first lag mode and 5.936 per revolution for the first yawing, and rolling moments. The center of action of torsional mode.

aerodynamic load is 4.806 feet below and 0.394 inch forward of the hub center of the main rotor. Directions of positive loads are shown in figure AI.

Table A1. Fuselage aerodynamic coefficients

i i ii ct, deg Lift, ft 2 Drag, ft2 Side force, ft2 Pitch, ft3 Yaw, ft3 Roll, ft3 (a) Coefficients for model with tail plane installation 21.0 18.764 16.619 1.850 -53.045 --6.308 -23.583 18.0 15.694 14.945 1.505 -58.579 9.310 -22.590 15.0 13.204 13.793 1.623 -74.844 -9.731 -20.858 12.0 9.546 12.548 1.657 -68.209 -11.909 -16.770 9.0 6.930 11.842 0.690 -67.183 -13.213 -9.773 6.0 4.062 11.447 0.622 -70.908 - 14.155 --6.367 3.0 0.849 11.110 0.488 -58.629 -14.971 --0.875 0.0 -1.901 11.060 0.572 -51.606 -17.124 4.373 -3.0 -5.265 11.749 0.774 -34.441 -21.093 10.866 -6.0 -9.924 12.103 0.606 0.572 -24.483 19.479 -9.0 - 14.130 12.675 0.715 24.794 -30.278 27.023 -12.0 -17.511 13.768 0.606 36.468 -34.752 36.930 -15.0 -19.966 15.559 0.723 31.211 -31.405 38.024 -18.0 -21.632 17.990 0.252 12.288 -23.709 33.028 -21.0 -23.936 20.286 -0.782 -36.098 -12.742 32.439 (b) Coefficients for model without tail plane installation 21.0 11.093 14.500 1.951 145.795 -19.386 -7.174 18.0 8.823 13.356 1.682 121.716 -19.193 -5.433 15.0 6.703 12.725 1.463 89.992 - 18.495 -4.399 12.0 4.525 12.103 1.489 58.242 -18.966 -3.381 9.0 3.364 11.590 0.723 24.071 -17.847 -0.168 6.0 1.564 11.295 0.597 -8.688 -18.503 0A29 3.0 0.294 10.967 0.463 -42.817 -17.098 1.194 0.0 -0.833 10.934 0.488 -75.997 -18.377 2.195 -3.0 -2.237 11.421 0.614 -109.184 -22.809 3.886 -6.0 -4.188 11.783 0.412 -137.384 -25.643 6.039 -9.0 -6.434 12.161 0.513 -161.522 -30.942 9.108 -12.0 -8.368 12.893 0.681 -183.364 -39.857 16.072 -15.0 -10.412 14.289 1.161 -204.987 -48.209 19.529 -18.0 -13.095 15.526 1.489 -224.727 -56.661 27.948 -21.0 -16.207 17.208 1.161 -245.576 -61.606 35.029 Table A2. Coefficients for NPL9618 airfoil. (a) Lift coefficient or, Mach deg 0.3 0.4 0.5 0.6 0.7 0.8 -5.0 -0.4828 -0.5087 -0.5345 -0.5732 -0.5147 -0.1839 --4.0 -0.3803 -0.4000 -0.4209 -0.4502 --0.5138 -0.1462 -3.0 --0.2778 --0.2913 --0.3073 --0.3272 -0.3910 -0.1086 -2.0 -0.1753 -0.1826 -0.1937 -.-0.2042 -0.2483 -0.0709 -1.0 -0.0728 -0.0739 -0.0801 -0.0812 -0.1056 -0.0333 0.0 0.0297 0.0348 0.0335 0.04 18 0.0371 0.0054 1.0 0.1322 0.1435 0.1471 0.1648 0.1798 0.0431 2.0 0.2347 0.2522 0.2607 0.2878 0.3225 0.0807 3.0 0.3372 0.3609 0.3743 0.4108 0.4652 O.1184 4.0 0.4397 0.4696 0.4879 0.5338 0.5143 O. 1560 5.0 0.5422 0.5783 0.6015 0.6568 0.5152 O. 1937 6.0 0.6447 0.6870 0.7151 0.7798 0.5160 0.2313 7.0 0.7472 0.7957 0.8287 0.8406 0.5169 0.2690 8.0 0.8497 0.9044 0.9423 0.8222 0.5194 0.3066 9.0 0.9522 1.0130 1.0140 0.8037 0.5475 0.3443 10.0 1.0550 1.1220 0.9178 0.7853 0.5756 0.3819 11.0 1.1570 1.0800 0.8217 0.7669 0.6037 0.4196 12.0 1.1130 0.8306 0.7607 0.7618 0.6318 0.4572 13.0 0.8378 0.8018 0.7815 0.7827 0.6599 0.4949 14.0 0.8526 0.8215 0.8024 0.8035 0.6879 0.5325 15.0 0.8702 0.8412 0.8232 0.8244 0.7160 0.5702 16.0 0.8879 0.8608 0.8441 0.8452 0.744 1 0.6078 17.0 0.9055 0.8805 0.8650 0.8661 0.7722 0.6454 18.0 0.9232 0.9002 0.8858 0.8869 0.8003 0.6831 19.0 0.9409 0.9199 0.9067 0.9077 0.8284 0.7207 20.0 0.9585 0.9395 0.9275 0.9286 0.8564 0.7584 Table A2. Continued. (b) Drag coefficient ii cz, Mach deg 0.3 0.4 0.5 0.6 0.7 0.8 -5.0 0.0105 0.0110 0.0114 0.0123 0.3055 O. 1047 -4.0 0.0105 0.0107 0.0109 0.0115 0.1937 0.0862 -3.0 0.0105 0.0105 0.0106 0.0110 O.1084 0.0677 -2.0 0.0105 0.0103 0.0104 0.0106 0.0496 0.0492 -1.0 0.0105 0.0102 0.0102 0.01 04 0.0173 0.0307 0.0 0.0105 0.0102 0.0102 0.0104 0.0112 0.0170 1.0 0.0105 0.0103 0.0103 0.0105 0.0308 0.0352 2.0 0.0105 0.01 04 0.0105 0.0109 0.0769 0.0534 3.0 0.0105 0.0106 0.0108 0.0113 0.1494 0.0716 4.0 0.0105 0.0109 0.0112 0.0120 0.2485 0.0898 5.0 0.0105 0.0112 0.0117 0.0165 0.3741 0.1080 6.0 0.0106 0.0116 0.0123 0.0317 0.5261 O.1262 7.0 0.0116 0.0122 0.0132 0.0577 0.7047 O.1444 8.0 0.0140 0.0151 0.0183 0.0945 0.8957 O.1626 9.0 0.0178 0.0210 0.0286 O.1420 0.8801 O.1808 10.0 0.0229 0.0299 0.0444 0.2004 0.8644 O.1990 11.0 0.0293 0.04 18 0.0655 0.2695 0.8488 0.2172 12.0 0.0371 0.0566 0.0913 0.3254 0.8332 0.2354 13.0 0.0462 0.0828 O.1174 0.3383 0.8176 0.2536 14.0 0.0765 O.1110 O.1436 0.3512 0.8020 0.2718 15.0 O.1069 O.1393 O.1698 0.3641 0.7864 0.2900 16.0 0.1374 0.1676 0.1960 0.3770 0.7707 0.3082 17.0 O. 1679 O. 1958 0.2222 0.3900 0.7551 0.3264 18.0 O. 1983 0.2241 0.2484 0.4029 0.7395 0.3446 19.0 0.2288 0.2523 0.2746 0.4158 0.7239 0.3628 20.0 0.2593 0.2806 0.3008 0.4287 0.7083 0.3810 Table A2. Concluded. (c) Pitching-moment coefficient ct, Mach deg 0.3 0.4 0.5 0.6 0.7 0.8 -5.0 --0.0226 -0.0228 -0.0239 -0.0301 -0.0184 0.0050 -4.0 -0.0219 -0.0222 -0.0232 -0.0263 -0.0252 0.0011 -3.0 -0.0213 -0.0216 -0.0226 -0.0248 -0.0274 -0.0029 -2.0 -0.0207 -0.0210 -0.0220 -0.0240 -0.0282 -0.0068 -1.0 -0.0201 -0.0203 -0.0213 -0.0233 -0.0284 -0.0108 0.0 -0.0194 -0.0197 -0.0207 -0.0225 -0.0281 -0.0153 1.0 -0.0188 -0.0191 -0.0201 -0.0218 -0.0280 -0.0193 2.0 -0.0182 -0.0184 ---0.0195 -0.0210 -0.0285 -0.0232 3.0 -0.0175 -0.0178 --0.0188 -0.0200 -0.0297 -0.0271 4.0 -0.0169 -0.0172 -0.0182 -0.0170 -0.0347 -0.0311 5.0 -0.0163 -0.0166 -0.0175 -0.0117 -0.0415 -0.0350 6.0 -0.0156 -0.0159 -0.0160 -0.0043 -0.0483 -0.0389 7.0 -0.0149 -0.0142 -0.0133 -0.0032 -0.0551 -0.0428 8.0 -0.0137 -0.0114 -0.0095 -0.0122 -0.0627 -0.0468 9.0 -0.0121 -0.0073 -0.0087 -0.0211 -0.0666 -0.0507 10.0 -0.0100 -0.0020 -0.0245 -0.0301 -0.0705 -0.0545 11.0 -0.0075 -0.0109 -0.0404 -0.0390 -0.0743 -0.0584 12.0 -0.0200 -0.0407 -0.0537 -0.0476 -0.0782 -0.0623 13.0 -0.0563 -0.0504 -0.0576 -0.0514 -0.0821 -0.0661 14.0 -0.0616 -0.0542 -0.0614 -0.0552 -0.0859 -0.0700 15.0 -0.0654 -0.0580 -0.0652 -0.0590 -0.0897 -0.0738 16.0 -0.0692 -0.0619 -0.0690 -0.0628 -0.0935 -0.0776 17.0 -0.0730 -0.0656 -0.0728 -0.0666 -0.0973 -0.0814 18.0 -0.0767 -0.0694 -0.0765 -0.0704 -0.1010 -0.0851 19.0 -0.0805 -0.0731 -0.0803 -0.0741 -0.1048 -0.0889 20.0 -0.0842 -0.0768 -0.0840 -0.0778 -0.1085 -0.0926 O 0000 "1"" 00000 c_ ,-4 0_ z O0 0 0 0 0 000 0 O0

I_OOOOooooooooooooooooo_ooooooo

./i 0000000000000_0000000000000000

I°i

00000000

E

°_ m [-.,

II

_IE

q_ °_

E io io

O E m C_

_1 _

[-

I_

Ii I

ol

_o _ _J _D o_ J °_ i- t_ cJ J _q Z f- _P _J _J c_ E- 3g I°looddoc_doc_od dddddddooo _.1_

°r

........... o ooo_

_p

=F Id .12 v

i .1

f- ddddddddc_ddddc_dddc_dc_ddcSddd

ii

4O U Iol .

E E .=_

Ir

u [..

Hodzomll tail Side for_ I !

Dtl 9 J_ Roll Yew Figure A 1. Positive directions of the fuselage aerodynamic loads.

4O z

I

I I ' I._ NOMINAL 100 200 300 400 Rotor speed (rpm) Figure A2. Calculation of the rotating frequencies of the main-rotor blade in vacuo.

Appendix B

Aircraft Parameters

#Pf # 00,-I

• _ _:___

00 ,-" 00 ,'-, e.

o_ e- °_

E

r_ e.

°_ 4(.

'_ 0 _'_' 0 0

I//I

_ _ _._

_'_ _ _ _ _ _

_. _,

_'_._ -___.._._ _= '_._

4_

_5

I-

de5

rj _ _ o _. --. _. o. --.

..0 .-i

E

i-

Appendix C

Hub and Blade Parameters

t, ¢.' _ Flight 487, Condition B Edg.Bending @6.8%R, Flat.Bending @3.2%R, in-lb in-lb -I.1219E+04 MEAN 1.2538E+04 1.5365E+04 I/2PP 1.3426E+04 COSINE SINE Nth COSINE SINE -1.4044E+04 2.0390E+03 01 8.0144E+03 2.0284E+03 6.2966E+02 9.9230E+02 02 2.1140E+02 1.7589E+03 2.1837E+03 7.2518E+02 03 3.0425E+03 -1.3458E+03 4.k0130E+01 -6.7724E+00 04 7.2303E+02 1.1829E+03 1.1504E+03 1.6440E+02 05 -I.0341E+02 -1.7361E+03 1.4076E+02 -8.0782E+00 06 8.1250E+02 1.0020E+02 -6.2115E+01 -1.1416E+02 07 3.4589E+02 1.7348E+02 -5.9970E+01 1.8514E+01 08 3.4855E+02 1.4232E+02 -3.0937E+02 3.1680E+02 09 1.2204E+02 -2.0449E+01 -1.3816E+02 -1.4205E+02 i0 -5.1930E+01 -3.1731E+01 -1.2973E+02 -2.3037E+01 ii -5.7935E+01 -4.5911E+01 2.2529E+01 3.9836E+01 12 -9.0920E+01 6.1235E+00 -1.7733E+01 1.2972E+01 13 -6.6037E+01 -3.8262E+01 -2.1961E+01 -3.5464E+01 14 -2.4770E+01 3.8774E+00 4.3780E+00 -2.0076E+01 15 1.2110E+01 -1.4145E+01 -1.3702E+01 -1.9611E+01 16 3.4985E+01 2.2074E+01 -2.0248E+01 -1.1479E+01 17 4.1309E+00 -I.0226E+01 1.1526E+01 -1.5275E+01 18 6.7752E+00 -5.9453E+00 9.6855E+00 2.2452E+00 19 6.6067E+00 -2.0627E+01 3.0790E+00 -2.8237E+00 20 -9.4626E+00 -4.6699E+00 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb -2.7750E+03 MEAN 1.4123E+04 4.7530E+03 I/2PP 4.6106E+03 COSINE SINE Nth COSINE SINE -4.6017E+03 -5.2741E+02 01 3.6168E+03 7.7029E+02 9.7706E+01 5.5743E+02 02 -2.1764E+02 6.3294E+02 4.8789E+02 1.5298E+02 03 1.4215E+02 -1.2906E+02 1.1752E+02 -1.1123E+01 04 -5.6597E+00 -4.9983E+00 2.4344E+02 1.3709E+02 05 -9.7578E+01 4.9908E+02 1.9319E+01 -5.2160E+01 06 -2.6139E+02 1.9357E+01 2.2346E+01 -2.8703E+01 07 -2.2362E+02 -1.4171E+02 -3.7354E+01 -2.2662E+01 08 -1.7991E+02 -3.5172E+01 -3.2037E+01 3.8955E+01 09 -3.2758E+01 1.2349E+00 -3.9123E+01 6.2740E+00 I0 4.1606E+01 2.6116E+01 -1.5350E+01 1.9301E+00 Ii 6.9717E+01 5.9236E+01 2.0091E+01 1.2199E+01 12 6.3971E+01 -7.3083E+00 5.0941E+00 4.3686E+00 13 6.2786E+01 1.9349E+01 4.8380E+00 -6.1184E+00 14 I.I029E+01 2.3479E+00 -7.0212E+00 -1.0040E+00 15 -1.8864E+01 -3.6547E+00 -6.3591E+00 -1.8093E+00 16 -3.0868E+01 -1.0603E+01 2.8943E-01 -4.5800E+00 17 -2.6649E+00 6.4348E+00 -3.0033E+00 -1.0304E+00 18 -1.2386E+01 1.5533E+01 5.0017E+00 2.5171E+00 19 8.7730E-01 1.2721E+01 3.6440E+00 8.9201E-01 20 4.5790E+00 6.3088E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.3700E+04 -2.0956E+03 I/2PP 3.1676E+03 5.1027E+03 Nth COSINE SINE COSINE SINE 01 1.7531E+03 1.8212E+02 -4.8714E+03 1.8315E+02 02 -3.1803E+02 2.1152E+02 3.0291E+02 2.7351E+02 03 -6.0548E+02 1.5736E+02 2.4331E+02 -3.0297E+02 04 -2.0541E+02 -3.7899E+02 2.7952E+02 -1.5895E+02 05 -7.4560E+01 1.0350E+03 -7.3160E+01 -1.1407E+02 06 -4.9550E+02 -1.1325E+01 5.9496E+00 -2.8629E+01 07 -2.7731E+02 -1.8911E+02 1.1053E+02 2.4047E+01 08 -2.4516E+02 -7.3219E+01 -2.8008E+01 1.0865E+01 09 -5.5777E+01 -6.2831E+00 1.1818E+02 -1.3023E+02 10 4.2949E+01 2.2391E+01 5.9284E+01 3.9599E+01 11 5.7129E+01 4.2137E+01 3.7949E+01 1.9965E+00 12 5.2723E+01 -1.6500E+01 -2.1097E+00 -1.2085E+01 13 4.8947E+01 1.8280E+01 5.9553E+00 2.3371E-01 14 -2.2417E+00 -5.9716E+00 1.6897E+00 9.2190E+00 15 -7.0677E+00 -5.0126E-01 5.1972E-01 4.0349E+00 16 -5.8858E+00 -1.2487E+00 2.4867E+00 7.1341E+00 9.6953E+00 -3.2214E-01 17 -3.9425E+00 6.6823E+00 18 -1.0806E+00 -3.8808E+00 -1.1319E+00 1.3000E+01 19 5.9793E+00 9.2081E+00 -9.5898E+00 -1.0813E+00 20 -2.5525E+00 -3.8124E+00 -4.6721E-02 8.2230E-01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.0073E+04 -7.3469E+03 I/2PP 2.5557E+03 6.6288E+03 Nth COSINE SINE COSINE SINE 01 4.2451E+02 -6.4445E+02 -5.6224E+03 1.1557E+03 02 -6.4471E+02 -2.5898E+02 6.0928E+02 2.2381E+02 03 -I.0054E+03 1.9056E+02 6.4809E+01 -8.7951E+02 04 -2.7907E+02 -5.3070E+02 4.7384E+02 -2.8544E+02 05 6.4057E+01 8.4029E+02 -5.0864E+02 -3.7485E+02 06 -3.4093E+02 6.3332E+00 -6.8754E+01 1.6682E+01 07 -7.8685E+01 -5.1764E+01 5.1456E+01 3.5863E+01 08 -5.9469E+01 5.3352E-01 -2.0499E+01 2.5350E+01 09 -2.5245E+00 -7.4776E+00 1.7092E+02 -1.7863E+02 10 1.2525E+01 -9.5698E+00 1.0586E+02 4.5813E+01 11 -1.6556E+01 -1.9694E+01 7.1939E+01 5.9549E+00 12 -3.6582E+01 -8.5179E+00 -1.3077E+01 -2.5343E+01 13 -2.8713E+01 -1.0639E+01 1.4545E+01 -6.9093E+00 14 -1.4472E+01 -3.8476E+00 -3.7931E+00 1.1163E+01 15 1.3274E+01 4.0248E+00 3.6645E+00 3.9788E+00 2.2391E-01 -1.9239E+00 16 2.8448E+01 7.6461E+00 17 1.4277E+00 1.6306E+00 -1.0212E+01 -2.1486E+00 18 1.0354E+01 -1.2640E+01 -I.0934E+00 3.9395E+00 19 1.9355E-01 -6.5936E+00 -1.5689E+00 -4.3998E-01 20 -3.3185E+00 -6.3602E+00 -1.9425E+00 2.0034E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb 0.0000E+00 MEAN 3.9499E+03 0.0000E+00 I/2PP 2.6377E+03 Nth COSINE SINE COSINE SINE 01 8.4728E+01 -1.3159E+03 0.0000E+00 0.0000E+00 02 -1.1190E+03 -3.4971E+02 0.0000E+00 0.0000E+00 03 -1.0273E+03 2.9821E+02 0.0000E+00 0.0000E+00 04 -1.9295E+02 -1.6110E+02 0.0000E+00 0.0000E+00 05 4.4886E+01 1.0491E+01 0.0000E+00 0.0000E+00 06 1.7745E+02 3.6506E+01 0.0000E+00 0.0000E+00 07 1.8171E+02 1.3734E+02 0.0000E+00 0.0000E+00 08 1.7042E+02 3.3025E+01 0.0000E+00 0.0000E+00 09 4.0339E+01 1.3367E+01 0.0000E+00 0.0000E+00 10 -3.2257E+01 -1.4717E+01 0.0000E+00 0.0000E+00 11 -3.5657E+01 -2.1953E+01 0.0000E+00 0.0000E+00 12 -4.9801E+00 3.8674E+00 0.0000E+00 0.0000E+00 13 -8.5228E+00 8.5107E+00 0.0000E+00 0.0000E+00 14 7.0977E+00 4.5892E-01 0.0000E+00 0.0000E+00 15 -7.3316E+00 -2.0464E+00 0.0000E+00 0.0000E+00 16 -1.7980E+01 -9.0401E+00 0.0000E+00 0.0000E+00 17 -4.7830E+00 -2.7106E+00 0.0000E+00 0.0000E+00 18 -6.5350E+00 3.4560E+00 0.0000E+00 0.0000E+00 19 5.5693E-01 4.6454E+00 0.0000E+00 0.0000E+00 20 4.2590E+00 4.4636E-01 0.0000E+00 0.0000E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb -7.1783E+03 MEAN -1.4804E+02 3.8318E+03 I/2PP 3.0343E+03 Nth COSINE SINE COSINE SINE 01 -1.1759E+02 -1.1132E+03 -1.7652E+03 7.5796E+01 02 -1.4048E+03 -3.2650E+02 4.1688E+02 -1.6917E+02 03 -I.0141E+03 3.2847E+02 -7.0796E+02 -8.0765E+02 04 3.2199E+01 2.1380E+02 1.9121E+02 -1.6263E+02 05 4.2625E+01 -4.1479E+02 -7.6832E+02 -5.4486E+02 06 1.8251E+02 2.4302E+01 1.7712E+01 4.5148E+01 07 1.2337E+01 3.7349E+01 -1.8811E+02 -2.9989E+01 08 7.3261E-01 -2.0655E+01 6.8833E+01 -4.9742E+01 09 -3.7208E+01 -1.7883E+01 -2.0075E+02 1.9036E+02 10 -7.8162E+00 1.3934E+01 -7.4710E+01 -4.7274E+01 11 4.4982E+01 3.3752E+01 -5.0140E+01 5.8105E+00 12 4.5358E+01 -3.9828E+00 2.6032E+01 2.8558E+01 13 2.3412E+01 6.6073E-01 5.7598E-01 7.9510E+00 14 2.5789E+00 -8.1934E+00 1.0668E+00 -8.4015E+00 15 6.6964E+00 9.4129E-01 -4.1554E+00 -5.6761E+00 16 1.9281E+00 5.7481E+00 2.3918E+00 9.8085E+00 17 6.1853E-01 -1.7260E+00 9.2510E+00 2.1117E+00 18 1.1752E+01 4.7585E-01 4.9910E+00 3.0925E+00 19 1.0988E+00 8.9296E-01 -1.6651E+00 -4.1385E+00 20 -7.0364E+00 -2.5271E+00 -4.8509E-01 -4.6918E-01 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -1.8241E+03 0.0000E+00 I/2PP 1.9820E+03 0.0000E+00 Nth COSINE SINE COSINE SINE 01 -6.2389E+01 -1.0200E+02 0.0000E+00 0.0000E+00 02 -9.2339E+02 -1.2556E+02 0.0000E+00 0.0000E+00 03 -6.5962E+02 2.1277E+02 0.0000E+00 0.0000E+00 04 1.4349E+02 2.1415E+02 0.0000E+00 0.0000E+00 05 6.5816E+01 -1.5797E+02 0.0000E+00 0.0000E+00 06 -4.1814E+01 -1.6584E+01 0.0000E+00 0.0000E+00 07 -1.3302E+02 -1.0485E+02 0.0000E+00 0.0000E+00 08 -9.6266E+01 -2.8527E+01 O.O000E+O0 O.O000E+O0 09 1.9494E+00 1.5682E+01 0.0000E+00 0.0000E+00 10 1.8231E+01 9.7540E+00 0.0000E+00 0.0000E+00 11 -3.2621E+00 -1.9516E+01 0.0000E+00 0.0000E+00 12 -2.2665E+01 6.3293E+00 0.0000E+00 0.0000E+00 13 -2.3263E+01 3.9693E-01 0.0000E+00 0.0000E+00 14 5.2423E-01 1.7634E+00 0.0000E+00 0.0000E+00 15 4.0446E+00 9.1168E-01 0.0000E+00 0.0000E+00 16 -2.7079E+00 1.4996E+00 0.0000E+00 0.0000E+00 17 -2.4369E+00 -2.6295E+00 0.0000E+00 0.0000E+00 18 -1.4701E+00 1.2287E+00 0.0000E+00 0.0000E+00 19 -1.2858E+00 7.9665E-01 0.0000E+00 0.0000E+00 20 3.8016E-01 -1.3605E-01 0.0000E+00 0.0000E+00 Collective Control Longitudinal Cyclic Load, Ib Load, ib MEAN -5.7945E+02 6.3965E+01 1/2PP 8.9422E+01 3.7456E+01 Nth COSINE SINE COSINE SINE 01 -3.9789E+00 -5.1230E+00 3.1000E+00 4.0410E+00 02 -2.5161E+01 -2.1602E+01 -5.7886E-01 4.7208E+00 03 -9.6530E+00 1.1317E+01 -4.7868E-01 -9.7706E-02 04 2.6544E+01 2.2624E+01 -2.4605E+01 9.9553E+00 05 -5.6133E-01 8.7292E+00 1.7386E-01 -1.9922E-01 06 1.9497E+00 6.7727E+00 1.1053E-01 -1.2738E+00 07 -3.1959E+00 9.2303E-01 2.7506E-02 -7.0115E-01 08 -4.9602E+00 -2.1350E+01 -1.1002E-01 5.4756E-01 09 -2.4724E+00 6.5211E-01 1.3631E-03 1.0576E-01 10 -2.9408E-01 -1.9631E+00 -2.9470E-01 -1.0194E-01 11 -1.1013E+00 5.9086E-01 -4.8884E-01 -3.0413E-01 12 -9.7964E+00 -1.8515E+00 -3.1875E+00 -7.9358E-01 13 -2.2425E-01 1.8365E+00 -1.2112E-01 3.1610E-01 14 6.3891E-01 5.6651E-02 -1.7769E-01 -3.8333E-03 15 -5.6959E-01 -7.6105E-01 -1.6982E-01 -4.2812E-01 16 3.3143E+00 -3.5857E+00 -6.3096E-01 -1.0052E+00 17 -1.1630E+00 6.6107E-01 3.6759E-02 -5.3911E-02 18 6.3143E-01 -5.8826E-01 2.7260E-01 -2.4683E-01 19 2.9188E-01 1.0933E+00 2.7251E-02 -2.9269E-02 20 1.3329E-02 -5.3752E+00 3.5389E-01 -8.7885E-01 Spider Arm Load, Lateral Cyclic Load, ib ib -1.1801E+01 MEAN 0.0000E+00 9.4880E+01 I/2PP 0.0000E+00 Nth COSINE SINE COSINE SINE 01 0.0000E+00 0.0000E+00 3.8032E+01 6.3860E+01 02 0.0000E+00 0.0000E+00 -1.3948E+01 5.7688E+00 03 0.0000E+00 0.0000E+00 1.4364E+01 1.4582E+01 04 0.0000E+00 0.0000E+00 3.1825E+00 1.7831E+00 05 0.0000E+00 0.0000E+00 2.2069E+00 -1.8998E+01 06 0.0000E+00 0.0000E+00 -3.2542E+00 -1.4918E+01 07 0.0000E+00 0.0000E+00 9.6611E-01 -1.0865E+00 08 0.0000E+00 0.0000E+00 9.6351E-01 -2.0910E+00 09 0.0000E+00 0.0000E+00 -7.4936E-01 5.4624E-01 10 0.0000E+00 0.0000E+00 3.2942E+00 -3.6617E-01 11 0.0000E+00 0.0000E+00 -4.9464E-03 3.3115E+00 12 0.0000E+00 0.0000E+00 -7.9911E-01 3.6862E-01 13 0.0000E+00 0.0000E+00 5.2287E-01 -3.4702E-01 14 0.0000E+00 0.0000E+00 3.2219E+00 3.4187E+00 15 0.0000E+00 0.0000E+00 -2.8784E-01 1.4470E-01 16 0.0000E+00 0.0000E+00 6.6570E-01 -2.9390E-01 17 0.0000E+00 0.0000E+00 -3.4139E-01 -3.0538E-03 18 0.0000E+00 0.0000E+00 -6.3597E-02 -9.0475E-01 19 0.0000E+00 0.0000E+00 -2.3139E-02 1.9344E-01 20 0.0000E+00 0.0000E+00 -4.8447E-01 2.7633E-01 Damper Load, Blade Feathering Lag ib Angle, deg 4.4495E+02 MEAN 1.1023E+01 1.2137E+03 I/2PP 2.7367E+00 SINE Nth COSINE SINE COSINE 5.1960E+02 01 1.2510E+00 -2.4375E+00 -9.9552E+02 1.1451E+01 02 2.7487E-01 9.5546E-02 5.9093E+01 -5.7640E+01 03 3.3804E-01 8.3772E-02 1.3031E+02 -3.8442E+01 04 -3.1624E-02 3.3611E-03 1.9783E+01 -4.1919E+00 05 1.9283E-01 -2.4012E-02 4.3777E+01 1.1038E+01 06 5.9374E-03 9.5437E-03 -6.7929E+00 -9.2407E+00 07 -3.0213E-02 -3.1044E-02 -1.3429E+00 1.1563E+01 08 1.2906E-02 1.6661E-02 -2.0365E+01 -8.8402E+00 09 -4.7423E-02 3.3622E-02 4.8917E+00 -6.0298E+00 10 -1.4136E-02 -5.8198E-03 1.2861E+01 2.1181E+00 11 -3.2698E-05 2.4446E-02 3.0216E+00 -1.4623E+00 12 -1.7316E-02 5.1073E-03 1.8822E+00 3.1317E+00 13 4.9062E-03 6.4543E-03 2.5607E+00 -3.9024E-01 14 1.7557E-03 4.5578E-03 -3.8231E+00 -2.6294E+00 15 -4.2366E-03 -1.3400E-02 1.2522E+00 -4.9112E-01 16 -6.1410E-04 -4.6009E-03 -1.4963E+00 8.7225E-01 17 3.4190E-03 -7.7940E-03 1.7797E+00 2.5791E+00 18 -1.5354E-03 -8.8221E-03 1.8935E+00 -1.2370E+00 19 -9.2289E-04 -3.5480E-03 -1.4610E+00 2.1772E-01 20 4.9199E-03 1.1838E-03 -7.3087E-01 MRShaft Torque, in-lb MEAN 0.0000E+00 I/2PP 0.0000E+00 Nth COSINE SINE 01 0.0000E+00 0.0000E+00 02 0.0000E+00 0.0000E+00 03 0.0000E+00 0.0000E+00 04 0.0000E+00 0.0000E+00 05 0.0000E+00 0.0000E+00 06 0.0000E+00 0.0000E+00 07 0.0000E+00 0.0000E+00 08 0.0000E+00 0.0000E+00 09 0.0000E+00 0.0000E+00 10 0.0000E+00 0.0000E+00 11 0.0000E+00 0.0000E+00 12 0.0000E+00 0.0000E+00 13 0.0000E+00 0.0000E+00 14 0.0000E+00 0.0000E+00 15 0.0000E+00 0.0000E+00 16 0.0000E+00 0.0000E+00 17 0.0000E+00 0.0000E+00 18 0.0000E+00 0.0000E+00 19 0.0000E+00 0.0000E+00 20 0.0000E+00 0.0000E+00 Flight 487, Condition C Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 1.1536E+04 -1.2300E+04 I/2PP 4.4747E+03 1.3859E+04 Nth COSINE SINE COSINE SINE 01 1.0112E+03 1.5057E+03 -1.2761E+04 4.0459E+03 02 5.8731E+02 1.1585E+03 6.6025E+02 8.7403E+02 03 1.3476E+03 -1.9492E+03 1.8641E+03 -2.1696E+02 04 2.2093E+02 4.2336E+02 -4.0871E+01 1.8250E+02 05 -8.1497E+02 -9.6642E+02 5.3582E+02 4.6438E+01 06 5.3398E+02 -4.4518E+02 1.8251E+02 -7.2244E+00 07 5.1238E+02 -1.6311E+02 -6.5523E+01 -9.9456E+01 08 1.8401E+02 7.0628E+00 -1.5378E+01 1.3992E+01 09 3.3081E+01 -2.9463E+01 3.8128E+01 3.0404E+02 10 -9.6734E+01 1.7208E+01 -2.0071E+02 7.0171E+01 11 -9.0285E+01 3.0196E+01 -1.2477E+02 1.5043E+02 12 -5.6925E+01 1.1398E+02 8.3052E+01 -2.0413E+01 13 -7.2035E+01 5.9977E+01 -1.8563E+01 3.8145E+01 14 -7.6642E+00 -2.2362E+01 -1.3178E+01 2.5790E+00 15 2.7948E+01 -2.3365E+01 -2.1248E+01 -2.2491E+01 16 2.1114E+01 -2.3425E+01 -1.8785E+01 3.1385E+00 17 -2.1931E+01 -1.8724E+01 2.4959E+01 2.5787E+01 18 -2.4082E+01 -2.7032E+01 -7.3621E+01 7.0757E+01 19 -1.5379E+00 -2.2040E+01 -1.3204E+01 -1.3645E+01 20 1.3765E+01 -1.8087E+00 9.8185E-02 -3.3071E-01 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb -3.4951E+03 MEAN 1.3606E+04 4.4123E+03 I/2PP 1.6828E+03 COSINE SINE Nth COSINE SINE -4.3665E+03 2.4539E+02 01 8.6056E+02 4.9898E+02 2.0608E+02 4.8637E+02 02 -6.9789E+01 4.9646E+02 4.3229E+02 -6.4789E+01 03 4.9240E+01 -1.8656E+02 6.1546E+01 -9.2126E+00 04 2.1966E+01 -2.1082E+01 1.3667E+02 8.3620E+01 05 1.3978E+02 3.4274E+02 2.9917E+00 -1.7589E+01 06 -1.6054E+02 1.6550E+02 3.8675E+00 -3.5464E+01 07 -2.5964E+02 5.7141E+01 -3.1780E+01 -2.3232E+01 08 -9.2585E+01 -2.3696E+00 4.2579E+00 3.4338E+01 09 2.1866E+01 -3.5902E+00 10 6.8407E+01 -3.1577E+01 -1.7491E+01 2.9905E+01 -1.4174E+01 3.1098E+01 11 8.9193E+01 -2.4552E+01 2.6074E+01 -2.4974E+01 12 4.1019E+01 -9.5140E+01 2.5912E+00 2.5734E+00 13 5.9927E+01 -4.5778E+01 -7.4945E-01 -3.8699E+00 14 -4.4594E+00 1.8777E+00 5.1675E+00 -2.8004E+00 15 -2.7896E+01 2.2415E+01 16 -1.1909E+01 2.2453E+01 -5.8148E+00 -5.2070E+00 17 2.3870E+01 2.2221E+01 2.1821E+00 9.7328E-01 4.0488E+00 7.4054E+00 18 3.2738E+01 2.6595E+01 2.0865E+00 -2.5480E+00 19 8.0597E+00 2.4509E+01 20 -1.5960E+01 -1.9600E-01 -5.0872E+00 -4.8759E-01 Edg.Bending @19.54%R, Flat.Bending @19.54%R, in-lb in-lb -2.5417E+03 MEAN 1.3242E+04 4.4701E+03 I/2PP 1.6391E+03 COSINE SINE Nth COSINE SINE 01 1.6349E+02 2.2749E+01 -4.3151E+03 8.9404E+02 3.7543E+02 2.1594E+02 02 -2.6989E+02 2.0956E+02 9.9398E+01 -2.6087E+02 03 -2.5204E+02 2.3855E+02 1.0119E+02 -3.0135E+02 04 -4.3270E+01 -1.6983E+02 -7.0991E+01 -8.0950E+01 05 3.6871E+02 6.4013E+02 06 -3.1542E+02 2.7939E+02 -2.0481E+01 -3.2665E+01 7.2530E+01 -3.3342E+01 07 -3.6870E+02 8.9381E+01 -1.6926E+01 1.1715E+01 08 -1.3186E+02 -2.8989E+00 -2.2421E+01 -1.1488E+02 09 -3.8265E+00 1.5207E+00 5.7021E+01 -3.2630E+01 10 7.2493E+01 -1.9870E+01 11 6.6945E+01 -2.2284E+01 3.5289E+01 -5.8136E+01 -1.8214E+01 -2.0864E+00 12 2.2876E+01 -7.5374E+01 5.8410E+00 -1.1073E+01 13 5.0296E+01 -4.0055E+01 5.8973E+00 2.5500E+00 14 -8.0021E+00 -8.7255E+00 15 -8.9622E+00 1.1458E+01 5.2263E+00 8.1635E+00 8.4459E-01 -4.1031E+00 16 -2.0783E+00 9.5371E+00 -1.1918E+01 -1.2003E+01 17 4.3392E+00 -1.5856E+00 2.9396E+01 -3.8501E+01 18 1.0275E+01 -2.5536E+00 6.3772E+00 9.3743E+00 19 4.5323E+00 -7.8611E-01 1.4988E+00 1.3722E+00 20 1.4851E+00 1.3728E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 9.7731E+03 -7.6002E+03 I/2PP 1.9554E+03 6.1505E+03 Nth COSINE SINE COSINE SINE 01 9.0294E+01 -8.6080E+02 -5.2254E+03 1.9122E+03 02 -6.9656E+02 -7.9792E+01 6.8396E+02 1.5745E+02 03 -4.4011E+02 3.5651E+02 -2.4742E+02 -5.8517E+02 04 -7.8879E+01 -2.8576E+02 1.8940E+02 -6.0907E+02 05 3.9431E+02 4.5181E+02 -3.0785E+02 -2.3720E+02 06 -2.0203E+02 1.8714E+02 -7.2576E+01 -1.4757E+01 07 -1.2308E+02 7.7722E+01 2.4776E+01 1.4579E+01 08 -4.6236E+01 1.0965E+01 -2.9885E+00 3.5561E+01 09 -2.1085E+01 -2.0152E+01 -1.2123E+01 -1.6699E+02 10 -1.2033E+00 -3.7703E+00 8.9250E+01 -6.6313E+01 11 -4.4376E+01 -1.6930E+01 8.0998E+01 -8.3042E+01 12 -2.6887E+01 3.4433E+01 -4.9042E+01 2.1425E+01 13 -2.4124E+01 9.5122E+00 9.7689E+00 -2.6406E+01 14 7.5062E+00 -1.0764E+01 -2.4799E+00 5.0436E+00 15 2.9978E+01 -1.5923E+01 -2.0003E+01 1.2713E+01 16 1.8020E+01 -1.3414E+01 7.3231E+00 1.8363E+01 17 -1.6130E+01 -1.6460E+01 6.6975E+00 1.8510E+01 18 -2.5091E+01 -1.6690E+01 -1.6184E+01 2.1987E+01 19 -8.8218E+00 -1.5901E+01 -2.3348E+00 3.2782E+00 20 1.1258E+01 -6.5912E-02 -2.7522E-01 -1.2551E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 3.7923E+03 0.0000E+00 1/2PP 2.6057E+03 0.0000E+00 Nth COSINE SINE COSINE SINE 01 5.7386E+02 -1.6711E+03 0. 0000E+00 0.0000E+00 02 -1.1808E+03 -1.4479E+02 0. 0000E+00 0.0000E+00 03 -5.7845E+02 4.7940E+02 0. 0000E+00 0.0000E+00 04 -1.1555E+02 -7.5005E+01 0. 0000E+00 0.0000E+00 05 7.8217E+01 -4.3233E+01 0. 0000E+00 0.0000E+00 06 8.0722E+01 -7.6124E+01 0.

0000E+00 0.0000E+00 07 2.0813E+02 -5.6740E+01 0.

0000E+00 0.0000E+00 08 1.2882E+02 1.7002E+01 0.

0000E+00 0.0000E+00 09 3.2999E+00 2.4254E+01 0. 0000E+00 0.0000E+00 10 -6.1039E+01 1.4979E+01 0. 0000E+00 0.0000E+00 11 -3.0300E+01 3.3133E+01 0. 0000E+00 0.0000E+00 12 3.7566E+00 4.9695E+01 0.

0000E+00 0.0000E+00 13 -2.8942E+01 2.4038E+01 0. 0000E+00 0.0000E+00 14 -1.9670E+01 9.9219E-01 0. 0000E+00 0.0000E+00 15 -2.2797E+01 1.3191E+00 0. 0000E+00 0.0000E+00 16 -1.6873E+01 4.2052E+00 0. 0000E+00 0.0000E+00 17 5.4481E+00 2.8258E+00 0. 0000E+00 0.0000E+00 18 1.9994E+01 7.5197E+00 0. 0000E+00 0.0000E+00 19 9.3464E+00 1.3137E+01 0.

0000E+00 0.0000E+00 20 -6.0897E+00 -1.8219E+00 0.

0000E+00 0.0000E+00 6O Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb -3.2483E+02 -7.2444E+03 2.9452E+03 3.4032E+03 COSINE SINE COSINE SINE Nth 01 4. 5080E+02 -1.3789E+03 -1.8692E+03 2.5793E+02 02 -1. 5265E+03 -9.8784E+01 3.9079E+02 -1.2175E+02 03 -7. 6373E+02 6.1206E+02 -7.6734E+02 -3.4256E+02 04 -9. 7471E+01 1.5626E+02 4.4079E+01 -4.1515E+02 05 -I. 9554E+02 -1.8315E+02 -5.3943E+02 -3.2002E+02 06 I. 6842E+02 -6.5822E+01 -2.5593E÷00 3.6475E+00 07 4. 0585E+01 -3.6612E+01 -1.3100E+02 7.8349E+01 08 -3. 6682E+01 -1.1806E+01 4.5660E+01 -5.8363E+01 09 2. 9515E+00 1.3886E+01 4.1577E+01 1.7143E+02 10 4. 2201E+01 9.4903E+00 -8.0332E+01 4.6260E+01 11 3. 0131E+01 -1.5805E+01 -3.2401E+01 7.8930E+01 12 7. 1083E-01 -9.1105E+01 4.7825E+01 -2.0719E+01 13 5. 0865E+01 -3.8707E+01 9.8027E+00 5.4513E+00 14 1.

7379E+01 7.2600E+00 -1.1100E+00 -3.2818E+00 15 4. 2658E+00 9.1777E+00 1.1195E+01 4.8266E-01 16 8.

0038E+00 -2.6494E+00 -5.6327E+00 -7.1023E+00 17 5. 8501E+00 -7.9786E-01 -1.1011E+01 -1.5783E+01 18 -3. 6100E+00 3.7192E-01 1.6089E+01 -3.1349E+01 19 -5. 7396E+00 -4.7158E+00 -1.1955E+00 -1.5383E+00 20 1. 3205E+00 9.7726E-01 -2.0194E+00 2.8722E-01 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -1.8623E+03 0.0000E+00 I/2PP 1.8110E+03 0.0000E+00 Nth COSINE SINE COSINE SINE 01 9. 9958E+01 -1.2970E+02 0.0000E+00 0.0000E+00 02 -8. 5089E+02 -3.4742E+00 0.0000E+00 0.0000E+00 03 -6. 0491E+02 3.7224E+02 0.0000E+00 0.0000E+00 04 1. 7072E+01 2.2814E+02 0.0000E+00 0.0000E+00 05 -6. 5599E+01 -7.4891E+01 0.0000E+00 0.0000E+00 06 -3. 7761E+01 1.1330E+01 0.0000E+00 0.0000E+00 07 -1. 3901E+02 4.5255E+01 0.0000E+00 0.0000E+00 08 -4. 9901E+01 -1.0613E+01 0.0000E+00 0.0000E+00 09 -8. 8004E+00 -2.7810E+01 0.0000E+00 0.0000E+00 10 -I. 5209E+00 9.6460E-01 0.0000E+00 0.0000E+00 11 -3. 6086E+00 7.3831E+00 0.0000E+00 0.0000E+00 12 2. 0478E+00 2.6409E+01 0.0000E+00 0.0000E+00 13 -2. 0149E+01 1.5256E+01 0.0000E+00 0.0000E+00 14 -7. 7807E+00 4.8396E+00 0.0000E+00 0.0000E+00 15 1. 7144E+00 -5.8656E+00 0.0000E+00 0.0000E+00 16 1. 9319E+00 -5.0215E+00 0.0000E+00 0.0000E+00 17 -i. 6385E+00 3.4209E+00 0.0000E+00 0.0000E+00 18 -2. 5615E+00 3.6245E+00 0.0000E+00 0.0000E+00 19 9. 1363E-01 -1.2658E+00 0.0000E+00 0.0000E+00 20 2. 1724E+00 -2.6697E+00 0.0000E+00 0.0000E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib -5.7852E+02 3.9317E+01 1.3520E+02 2.4146E+01 Nth COSINE SINE COSINE SINE 01 3.4233E+00 -3.9541E+00 2.4274E+00 2.6816E+00 02 -2.4398E+01 -4.9895E+00 1.2456E+00 2.9746E+00 03 -9.4600E-01 1.0568E+01 1.4717E-01 1.2771E-01 04 6.7767E+01 -1.0290E+01 -1.1568E+01 9.8464E+00 05 8.6965E+00 4.2889E+00 1.6888E-01 1.2888E-01 06 -1.3255E+00 2.4208E+00 1.5220E-01 -1.4832E+00 07 4.5481E-01 -7.3466E-01 2.4037E-02 -3.5247E-01 08 -1.0190E+01 -2.4426E+01 1.6181E+00 -1.6091E+00 09 1.5147E+00 8.3017E-01 1.3210E-01 -3.8310E-02 10 -2.7188E+00 1.3347E+00 -6.3153E-02 5.5700E-02 11 -9.3917E-01 1.8296E-01 1.5407E-01 3.2061E-01 12 2.3400E+01 -4.4722E+00 -1.1776E+00 1.9965E+00 13 4.8220E+00 4.6585E-01 -3.5541E-01 -2.1779E-01 14 -8.0894E-01 -9.9052E-02 7.3726E-02 7.0662E-02 15 8.4263E-01 -5.9458E-01 9.7304E-02 7.9647E-02 -5.6018E+00 -7.5440E-01 -1.5623E-01 16 4.5957E+00 17 -2.3633E+00 -3.7103E-01 -1.4050E-02 8.0726E-02 18 6.6552E-01 1.8530E-01 3.9131E-02 -1.2047E-01 19 -2.5820E-02 -9.5017E-01 8.6088E-02 6.5881E-02 20 4.6149E-01 -8.6117E-01 -3.3294E-03 -1.1931E-01 Lateral Cyclic Load, Spider Arm Load, ib ib MEAN 0.0000E+00 -1.3593E+01 1/2PP 0.0000E+00 9.9597E+01 Nth COSINE SINE COSINE SINE 01 0. 0000E+00 0.0000E+00 5.9281E+01 4.9225E+01 02 0. 0000E+00 0.0000E+00 -I.1799E+01 1.4744E+01 03 0. 0000E+00 0.0000E+00 1.2846E+01 8.0347E+00 04 0. 0000E+00 0.0000E+00 4.3780E+00 -2.0088E+00 05 0. 0000E+00 0.0000E+00 3.3498E-01 -1.1599E+01 06 0. 0.0000E+00 -5.9721E+00 -5.9576E+00 0000E+00 07 0. 0000E+00 0.0000E+00 -1.7255E+00 -3.7358E+00 08 0. 0000E+00 0.0000E+00 -3.6887E-01 -1.1082E+00 09 0. 0000E+00 0.0000E+00 1.4458E+00 6.8953E-01 I0 0. 0000E+00 0.0000E+00 4.1261E+00 2.9024E-01 11 0. 0000E+00 0.0000E+00 6.6512E-01 1.6546E+00 12 0. 0000E+00 0.0000E+00 1.4795E+00 -1.2604E+00 13 0000E+00 0.0000E+00 -9.1462E-01 1.9785E+00 0.

14 0. 0000E+00 0.0000E+00 2.7788E+00 3.9966E+00 0000E+00 0.0000E+00 1.7883E-01 6.2444E-02 15 0.

16 0. 0000E+00 0.0000E+00 -6.6329E-01 1.3444E-01 17 0. 0000E+00 0.0000E+00 -5.9098E-01 -2.1213E-01 18 0. 0000E+00 0.0000E+00 -6.6812E-01 -2.2476E-01 19 0. 0000E+00 0.0000E+00 -1.4393E-01 -1.4005E-01 20 0. 0000E+00 0.0000E+00 6.4046E-02 1.0812E-01 Lag Damper Load, Blade Feathering ib Angle, deg 4.4388E+02 MEAN 1.0758E+01 1.1612E+03 I/2PP 2.8278E+00 SINE Nth COSINE SINE COSINE 6.2321E+02 01 8.6921E-01 -2.7090E+00 -8.9665E+02 5.8665E-01 02 2.6840E-01 -3.4458E-02 6.2970E+01 -7.4711E+01 03 2.1302E-01 -2.8962E-02 8.5384E+01 -4.5741E+01 04 9.5046E-03 -1.6893E-02 -6.5436E-01 -1.2145E+01 05 7.6371E-02 -6.5162E-02 2.5401E+01 6.4494E+00 06 -8.9503E-03 1.9985E-02 4.0553E+00 -4.4211E+00 07 3.6011E-03 -3.0401E-02 -7.1097E+00 1.4351E+01 08 1.2901E-02 -1.5454E-02 -6.1632E+00 -7.6278E+00 09 2.6612E-02 4.9336E-02 -2.2077E+00 10 9.9984E-03 -1.7230E-02 1.7696E+00 -1.0742E+01 -2.1011E+00 11 -4.1735E-03 9.2930E-03 4.1226E+00 -5.5937E+00 12 2.1332E-02 -4.4578E-03 2.4804E+00 -4.0371E-02 13 6.7201E-03 -1.0026E-03 3.2735E+00 2.7365E+00 14 3.0813E-05 2.1521E-02 -2.4422E-01 1.9636E-01 15 -5.6677E-04 1.4968E-03 -2.9285E+00 6.3138E-01 16 3.7150E-03 2.6321E-03 -2.2601E+00 -2.0569E+00 17 7.0064E-03 7.9148E-03 -6.3598E-01 -8.2372E+00 18 -1.9671E-03 1.6353E-03 3.9919E+00 3.2860E+00 19 4.0961E-03 4.0235E-03 4.0772E-01 4.8027E-01 20 -6.2564E-03 7.9573E-04 4.1687E-01 MR Shaft Torque, in-lb MEAN 1.0620E+05 1/2PP 8.2681E+03 Nth COSINE SINE 01 2.2447E+02 2.3215E+03 02 -3.4740E+02 4.2098E+03 03 -4.9628E+01 4.0782E+02 04 -7.6335E+02 2.5391E+03 05 1.9136E+01 1.4526E+02 06 -4.7449E+02 6.5979E+02 07 -1.1296E+02 2.3039E+02 08 2.4838E+02 -8.1960E+01 09 -5.7931E-01 -6.9934E+00 10 -2.0191E+01 -1.3100E+01 11 9.1793E+01 2.2172E+01 12 5.2927E+02 2.3550E+02 13 2.1522E+01 3.8655E+01 14 -1.7913E+00 2.6267E+00 15 -1.7061E+00 2.2288E+01 16 3.8475E+01 4.3310E+01 17 1.0389E+01 2.0050E+01 18 4.3424E+01 2.7498E+01 19 -6.7579E+00 1.1938E+01 20 1.2471E+01 -1.5646E+00

Flight 487, Condition D

Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 1.2316E+04 -9.4615E+03 I/2PP 7.2661E+03 1.4654E+04 Nth COSINE SINE COSINE SINE -1.3134E+04 5.5125E+03 01 -1.6166E+03 2.1790E+03 9.3649E+02 8.7906E+02 02 -6.1323E+02 5.8830E+01 03 2.0866E+03 -3.1763E+03 2.3630E+03 -5.6621E+02 04 -1.6649E+02 3.3277E+02 3.6344E+01 3.1198E+02 05 -7.5891E+02 -3.9635E+02 2.2774E+02 3.8130E+02 06 5.0580E+02 -4.8046E+01 2.8360E+02 1.1156E+02 07 4.9002E+02 1.0527E+02 9.9804E+81 -1.7529E+02 08 3.2989E+02 2.4972E+02 7.1327E+01 -2.2644E+01 09 1.3400E+02 3.2778E+01 -1.8543E+02 1.3059E+02 10 -4.4196E+01 -5.0470E+01 1.4506E+02 -3.0457E+02 11 -2.6746E+01 -8.9497E+01 1.4955E+01 -1.9456E+02 12 3.0445E+00 1.9443E+01 8.0956E+01 -2.1632E+01 13 -8.7372E+01 -3.8181E+01 7.2027E+01 -6.2680E+01 14 -1.1087E+01 -1.6356E+01 8.8349E+01 -4.5340E+01 15 3.4525E+00 4.1465E+01 1.0024E+02 -3.5719E+01 16 -8.5488E+00 4.6004E+01 9.4283E+01 -6.5093E+01 17 2.4296E+01 3.6470E+00 9.0299E+01 -7.6590E+01 18 7.4450E+00 2.8169E+01 1.2066E+02 -9.5141E+00 19 -9.2933E+00 1.2350E+00 7.4407E+01 -5.0307E+01 20 -2.5124E+00 -4.8918E+00 9.0317E+01 -4.8800E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.3715E+04 -1.9083E+03 1/2PP 1.7173E+03 4.8686E+03 Nth COSINE SINE COSINE SINE 01 -6.8568E+01 7.2532E+02 -4.8629E+03 5.9903E+02 02 -4.3990E+02 2.9927E+02 3.3574E+02 5.0680E+02 03 1.9493E+02 -3.3387E+02 5.9660E+02 -1.2065E+02 04 1.2250E+01 1.9905E+00 1.0219E+02 -1.1178E+01 05 8.7909E+01 2.0903E+02 1.0392E+02 1.2602E+02 06 -1.7019E+02 2.4194E+01 5.2776E+01 2.3478E+01 07 -2.0088E+02 -9.3635E+01 4.1534E+01 -3.9505E+01 08 -1.8606E+02 -1.2466E+02 -I.0587E+01 -3.8714E+01 09 -2.9088E+01 -3.3094E+01 2.3791E+00 1.4322E+01 10 4.1125E+01 4.2360E+01 5.7763E+01 -5.7384E+01 11 1.4064E+01 1.0017E+02 1.7127E+01 -3.9276E+01 12 4.4024E+00 -1.2495E+01 2.9713E+01 4.0205E+00 13 7.4391E+01 4.1592E+01 2.9776E+01 -9.2695E+00 14 1.2549E+01 3.8044E+00 3.4058E+01 -1.5290E+01 15 -1.3629E+00 -3.6737E+01 4.3740E+01 -2.2393E+01 16 6.9182E+00 -4.0201E+01 3.0663E+01 -3.1172E+01 17 -2.7393E+01 -5.7072E+00 2.9792E+01 -1.4655E+01 18 -1.1990E+01 -2.7434E+01 3.3512E+01 -2.3320E+01 19 1.5088E+01 -3.8076E+00 2.9910E+01 -2.3041E+01 20 1.0198E+01 7.1779E+00 3.5814E+01 -1.6606E+01 Edg.Bending @19.54%R, Flat.Bending @19.54%R, in-lb in-lb -1.5460E+03 MEAN 1.3539E+04 4.7695E+03 I/2PP 1.6085E+03 COSINE SINE Nth COSINE SINE 1.2951E+03 -4.5385E+03 01 -3.1643E+02 1.4495E+02 2.2574E+02 5.3843E+02 02 -4.1921E+02 2.1578E+02 -4.0963E+02 7.7779E+01 03 -2.5596E+02 3.9219E+02 -4.2594E+02 5.8789E+01 04 6.2263E+01 -1.3033E+02 4.9661E-01 -6.4341E+01 05 3.0903E+02 3.4928E+02 -1.1134E+01 3.7130E+01 06 -3.1748E+02 2.1554E+01 1.2957E+01 1.1440E+02 07 -2.9219E+02 -1.2470E+02 -1.4038E+01 4.0086E+01 08 -2.3730E+02 -1.7478E+02 -8.6021E+01 1.4522E+02 09 -5.3788E+01 -3.6182E+01 8.6615E+01 1.4212E+01 10 4.5508E+01 4.4078E+01 4.4851E+01 5.8216E+01 11 3.7802E+01 7.4353E+01 -2.5267E+01 3.4718E+01 12 1.9870E+00 -8.0284E+00 4.3342E+01 -7.2596E+00 13 7.5235E+01 1.8219E+01 -1.1349E+01 3.2869E+01 14 1.7072E+01 -9.9378E+00 3.1256E+01 -1.5974E+01 15 4.2011E+00 -2.1979E+01 -1.8412E+01 16 1.3394E+01 -1.9372E+01 2.9967E+01 -8.6705E+00 3.0417E+01 17 8.6299E+00 -7.3085E+00 -3.3377E+01 8.5315E+00 18 8.5831E+00 -1.2926E+01 -2.4304E+01 4.0678E+01 19 1.3100E+01 -7.2199E+00 -2.7276E+01 2.6757E+01 20 1.3447E+01 -1.0321E+01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb -6.8284E+03 MEAN 1.0071E+04 6.6774E+03 I/2PP 2.4393E+03 COSINE SINE Nth COSINE SINE -5.5419E+03 2.5320E+03 01 2.6138E+02 -9.4322E+02 8.3463E+02 1.2695E+02 02 -7.1668E+02 1.5073E+02 -4.6486E+02 -8.5264E+02 03 -4.8099E+02 6.3231E+02 6.9669E+01 -8.6149E+02 04 3.4286E+01 -2.7330E+02 05 3.9972E+02 1.9269E+02 -9.5361E+01 -3.1922E+02 -9.8334E-01 -5.4622E+01 06 -2.3714E+02 2.8921E+01 8.1877E+01 3.0345E+01 07 -1.0811E+02 -3.4186E+01 8.2442E+01 3.6233E+00 08 -6.2195E+01 -2.2538E+01 2.0763E+02 -1.2962E+02 09 -2.1066E+00 -8.8267E+00 2.6917E+00 1.4080E+02 10 9.6565E+00 -9.9391E-01 11 3.2775E+01 -3.8963E+01 1.0128E+02 9.8326E+01 5.4928E+01 -4.5342E+01 12 8.3432E+00 5.8551E+00 8.0617E+01 -7.8213E+00 13 -1.8561E+01 -3.6726E+01 4.3740E+01 -2.0401E+01 14 8.4518E+00 -1.5187E+01 2.4075E+01 -2.8000E+01 15 1.5876E+01 2.1200E+01 5.0413E+01 -1.1576E+01 16 1.1240E+01 2.5922E+01 4.0621E+01 -3.9074E+01 17 3.6822E+01 -4.4704E+00 4.8974E+01 -1.6750E+01 18 2.6891E+01 1.4287E+01 4.2981E+01 -2.4247E+01 19 2.0806E+00 -6.6998E+00 3.8039E+01 -3.1875E+01 20 4.0658E+00 -1.4707E+01 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 4.0007E+03 0.0000E+00 I/2PP 3.3325E+03 0.0000E+00 Nth COSINE SINE COSINE SINE 01 1.2096E+03 -2.0430E+03 0.0000E+00 0.0000E+00 02 -1.2111E+03 9.5963E+01 0.0000E+00 0.0000E+00 03 -5.7380E+02 6.6596E+02 0.0000E+00 0.0000E+00 04 -2.6962E+01 -1.0732E+02 0.0000E+00 0.0000E+00 05 6.1891E+01 -7.9729E+01 0.0000E+00 0.0000E+00 06 1.3462E+02 -1.2798E+01 0.0000E+00 0.0000E+00 07 1.9473E+02 9.5033E+01 0.0000E+00 0.0000E+00 08 1.7467E+02 1.0299E+02 0.0000E+00 0.0000E+00 09 5.9342E+01 1.6880E+01 0.0000E+00 0.0000E+00 10 -1.4262E+01 -3.2089E+01 O.O000E+O0 0.0000E+00 11 -2.6313E+01 -4.6508E+01 0.0000E+00 0.0000E+00 12 1.1246E+01 -3.6496E+00 0.0000E+00 0.0000E+00 13 -1.9978E+01 6.6346E+00 0.0000E+00 0.0000E+00 14 -2.4086E-01 2.7363E+00 0.0000E+00 0.0000E+00 15 2.1083E+00 -1.3013E+01 0.0000E+00 0.0000E+00 16 6.2636E-01 -2.0032E+01 0.0000E+00 0.0000E+00 0.0000E+00 0.0000E+00 17 -1.6833E+01 -2.3339E+00 18 -9.0432E+00 -1.3143E+01 0.0000E+00 0.0000E+00 19 5.0366E+00 2.2477E+00 0.0000E+00 0.0000E+00 20 3.8042E+00 7.3678E+00 0.0000E+00 0.0000E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -3.3961E+02 -6.9805E+03 1/2PP 3.3472E+03 4.2766E+03 Nth COSINE SINE COSINE SINE 01 1.2844E+03 -1.6748E+03 -2.2767E+03 3.3344E+02 02 -1.6894E+03 -1.1744E+02 4.4172E+02 4.7734E+01 03 -7.7848E+02 8.1846E+02 -I.0045E+03 -4.4077E+02 04 -5.7603E+01 1.0436E+02 -8.8710E+01 -6.2472E+02 05 -2.1098E+02 -9.0871E+01 -2.9752E+02 -4.6558E+02 06 1.1327E+02 3.7740E+01 1.7402E+01 -5.3998E+01 07 7.6640E+01 1.2098E+01 -1.4211E+02 -2.0224E+01 08 8.6704E+00 -1.3993E+01 2.4943E+01 -1.4538E+01 09 -3.3066E+01 -1.3205E+01 -1.2797E+02 1.2723E+02 10 1.2406E+01 1.6936E+01 7.9993E+01 -1.5172E+02 11 6.4099E+00 5.7134E+01 2.3259E+00 -7.6756E+01 12 -6.0767E+00 -9.5040E+00 3.5127E+01 2.0402E+01 13 5.1693E+01 8.9997E+00 3.0716E+01 -9.4749E+00 14 1.8824E+01 -1.4392E+01 3.7418E+01 -1.3114E+01 15 8.2716E+00 -9.1057E+00 4.5487E+01 -4.3363E+00 16 8.1883E+00 -3.3486E+00 2.4188E+01 -1.6617E+01 17 2.1504E+01 -7.3371E+00 3.4795E+01 2.6233E+00 18 1.8281E+01 2.1360E+00 2.1915E+01 -2.1327E+01 19 9.1327E+00 -9.5221E+00 3.6590E+01 -1.7298E+01 20 1.0298E+01 -1.6226E+01 3.0748E+01 -1.7460E+01 Edg.Bending @81%R, Flat.Bending @81%R, in-lb in-lb 0.0000E+00 MEAN -1.9343E+03 0.0000E+00 I/2PP 1.9366E+03 Nth COSINE SINE COSINE SINE 01 1.5038E+02 -1.9107E+02 0.0000E+00 0.O000E+00 02 -8.9036E+02 9.0118E+00 0.0000E+00 0.0000E+00 03 -6.0725E+02 3.4872E+02 0.0000E+00 0.0000E+00 04 -8.6378E+01 2.4975E+02 0.0000E+00 0.0000E+00 05 -6.1443E+01 5.9856E+01 0.0000E+00 0.0000E+00 06 1.1903E+01 -3.8964E+01 0.0000E+00 0.0000E+0O 07 -1.1854E+02 -8.0104E+01 0.0000E+00 0.0000E+00 08 -7.4881E+01 -4.8539E+01 0.0000E+00 0.0000E+00 09 2.6989E+01 -7.3089E+00 0.0000E+00 0.0000E+00 10 3.2120E+01 -6.1669E+00 0.0000E+00 0.0000E+00 11 2.0546E+01 -2.2205E+01 0.0000E+00 0.0000E+00 12 2.2426E+01 -1.9733E+00 0.0000E+00 0.0000E+00 13 5.9348E+00 -1.9656E+01 0.0000E+00 0.0000E+00 14 1.4593E+01 -6.4059E+00 0.0000E+00 0.0000E+00 15 1.4278E+01 -1.6386E+00 0.0000E+00 0.0000E+00 16 1.8192E+01 -6.5445E+00 0.0000E+00 0.0000E+00 17 1.6024E+01 -1.1369E+01 0.0000E+00 0.0000E+00 18 1.3341E+01 -1.3940E+01 0.0000E+00 0.0000E+00 19 1.4074E+01 -8.7352E+00 0.0000E+00 0.0000E+00 20 1.5102E+01 -7.0047E+00 0.0000E+00 0.0000E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib 3.2384E+01 MEAN -7.0919E+02 1.9507E+01 1/2PP 1.2740E+02 Nth COSINE SINE COSINE SINE 01 7.0141E+00 6.9851E-01 2.0066E+00 3.9573E+00 02 -2.3404E+01 -5.5921E+00 2.1011E+00 4.0759E+00 03 -1.3538E+01 8.2295E+00 -1.7380E-01 -3.2525E-01 04 4.8503E+01 2.2208E+01 -6.9886E+00 7.0259E+00 05 3.5934E-01 -5.0518E-02 2.6588E-01 -2.7048E-02 06 -5.2695E-01 2.0590E+00 1.1432E+00 -1.2297E+00 07 4.2759E+00 1.5294E+00 -5.5665E-01 -4.6939E-01 08 3.0190E+01 -2.7769E+01 -1.0374E+00 9.6298E-01 09 1.1577E-01 3.3531E-01 1.1948E-01 -3.4556E-02 10 -2.2312E+00 -8.9821E-01 -1.6731E-01 1.3587E-01 11 -3.2904E+00 -6.6565E-01 -2.9654E-01 4.4655E-01 12 1.3344E+01 -1.2697E+01 -2.2967E+00 1.2818E-01 13 3.2648E-01 1.6682E+00 9.8154E-02 -3.9693E-01 14 -2.5613E+00 8.0789E-01 6.6612E-02 -2.5717E-01 15 -4.3352E-01 6.5551E-01 7.8519E-02 -2.7190E-01 16 2.0105E-01 5.6874E+00 3.0697E-02 -9.9944E-01 17 -1.9648E+00 3.1949E-01 2.9771E-01 9.2700E-02 18 -1.1429E+00 9.0565E-02 2.1224E-01 1.2422E-01 19 -1.8665E+00 7.1614E-02 2.2185E-01 -6.4508E-02 20 2.4306E+00 1.7772E+00 9.7702E-01 -2.8603E-01 Lateral Cyclic Load, Spider Arm Load, lb ib MEAN 0.0000E+00 -2.5339E+01 1/2PP 0.0000E+00 1.1931E+02 Nth COSINE SINE COSINE SINE 01 0.0000E+00 0.0000E+00 8.2590E+01 5.1993E+01 02 0.0000E+00 0.0000E+00 -1.8408E+01 2.5035E+01 03 0.0000E+00 0.0000E+00 7.9570E+00 5.8245E+00 04 0.0000E+00 0.0000E+00 1.7722E+00 1.2352E+00 05 0.0000E+00 0.0000E+00 -8.7295E-01 -5.0973E+00 06 0.0000E+00 0.0000E+00 3.7792E+00 2.9165E-01 07 0.0000E+00 0.0000E+00 6.7528E-01 -9.3894E-01 08 0.0000E+00 0.0000E+00 2.2038E+00 -2.8244E+00 09 0.0000E+00 0.0000E+00 -4.0180E-01 2.2671E-01 10 0.0000E+00 0.0000E+00 -8.7639E-01 2.2859E+00 11 0.0000E+00 0.0000E+00 -4.7234E+00 -1.0914E-02 12 0.0000E+00 0.0000E+00 -4.5749E-01 -1.6298E+00 13 0.0000E+00 0.0000E+00 -2.7023E+00 1.6451E-01 14 0.0000E+00 0.0000E+00 2.8079E-02 3.8102E+00 15 0.0000E+00 0.0000E+00 -3.0148E-01 4.7985E-01 16 0.0000E+00 0.0000E+00 -2.2192E-01 -1.0847E-01 17 0.0000E+00 0.0000E+00 -1.0918E-01 4.8891E-02 18 0.0000E+00 0.0000E+00 8.0158E-02 1.1148E+00 19 0.0000E+00 0.0000E+00 -8.5284E-01 5.7353E-01 20 0.0000E+00 0.0000E+00 -5.9195E-01 -1.8327E-01 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.2034E+01 4.5129E+02 I/2PP 3.4070E+00 1.1937E+03 Nth COSINE SINE COSINE SINE 01 7.1380E-01 -3.5439E+00 -8.3733E+02 7.7731E+02 02 2.1180E-01 1.1817E-01 6.6896E+01 -2.0669E+01 03 3.4471E-01 -1.6037E-01 8.3540E+01 -1.3097E+02 04 -5.1844E-02 1.1449E-02 -1.4804E+01 -4.7402E+01 05 1.0973E-02 1.0742E-01 1.4220E+01 5.1115E+00 06 3.9504E-02 -1.5464E-02 7.4893E+00 -9.0119E-01 07 -2.6936E-02 1.0583E-02 1.1353E+01 -9.8293E+00 08 1.3604E-02 2.2530E-02 4.7468E+00 -2.2666E-01 09 -2.5435E-02 2.5853E-02 6.4217E+00 -1.5842E+01 10 -2.3810E-02 9.7206E-03 2.5888E-02 7.1286E+00 11 -3.0694E-02 -7.7653E-03 8.3388E+00 8.4086E+00 12 -2.3734E-02 2.1837E-02 7.6898E+00 -9.4142E+00 13 -1.6247E-02 2.2096E-02 1.1383E+01 -2.6456E+00 14 -1.1572E-02 1.3954E-03 4.7046E+00 -1.0045E+00 15 -1.5232E-02 1.5648E-02 5.5166E+00 4.9854E-01 16 -1.8977E-02 -5.3892E-03 5.5542E+00 -6.7372E+00 17 -1.5813E-02 -2.4301E-03 4.7802E+00 -3.6978E+00 18 -1.1005E-02 1.0188E-02 3.6231E-01 -5.0056E+00 19 -1.4056E-02 4.3166E-03 1.0813E+01 -4.1474E+00 20 -3.9188E-03 1.4300E-02 6.1230E+00 -4.6506E+00 MR Shaft Torque, in-lb MEAN 1.2611E+05 I/2PP 9.3821E+03 Nth COSINE SINE 01 -4.9239E+01 1.1518E+03 02 6.0627E+02 5.6721E+03 03 2.3770E+01 6.2905E+02 04 -4.0203E+02 3.3652E+03 05 -7.0982E+00 -6.9311E+01 06 -2.7149E+02 7.1650E+02 07 -2.4143E+01 1.7351E+02 08 2.1839E+02 2.7202E+01 09 5.3281E+00 -3.3552E+01 10 -1.6960E+02 3.4508E+00 11 4.5920E+01 -6.2716E+01 12 -6.8237E+01 3.1357E+01 13 2.8709E+01 -3.8672E+00 14 -1.8391E+01 -5.7295E+01 15 -6.2988E+01 -3.4749E+01 16 -1.7493E+01 9.5051E+01 17 6.5536E+00 -4.7817E+01 18 -5.4517E+00 -4.9810E+01 19 1.3330E+01 -1.6638E+01 20 2.2445E+01 1.7358E+00 Flight 487, Condition F Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb 1.5808E+03 MEAN 1.5211E+04 2.0040E+04 1/2PP 1.9642E+04 SINE Nth COSINE SINE COSINE 1.1394E+04 01 -3.1943E+03 5.2562E+03 -1.4677E+04 02 -7.0543E+03 -2.8446E+03 1.3871E+03 9.9715E+02 -2.6499E+03 03 3.4492E+03 -I.0469E+04 3.0750E+03 5.6925E+02 04 -1.2713E+03 1.3122E+03 5.8692E+02 1.0703E+02 05 6.4960E+02 -2.1388E+01 1.2317E+03 -5.8776E+01 06 -7.9074E+01 9.9573E+01 7.2139E+01 9.1421E+01 07 -6.8504E+01 -1.3482E+02 -6.5012E+01 2.8055E+01 08 -7.9097E+01 1.5644E+02 -5.5201E+00 -1.7646E+02 09 -2.6087E+01 4.8169E+01 2.8241E+00 2.1878E+02 10 -1.2955E+01 1.3038E+01 2.9512E+02 9.0043E+01 11 -4.5017E+01 7.5579E+01 2.6100E+02 1.1580E+01 12 -1.0490E+02 8.5977E+01 -6.3275E+00 -1.1397E+01 13 6.9234E+01 1.9322E+01 7.8878E+01 4.1684E+00 14 1.4327E+01 -1.4568E+01 4.1770E+00 6.5639E+00 15 5.6205E+00 -9.4990E+00 -2.1536E+01 -2.8136E+00 16 8.3185E+00 -3.7225E+01 3.6018E-01 -1.5069E+01 17 -4.3898E+01 -8.2115E-01 1.6533E+01 1.9824E+01 18 -1.0761E+01 -1.5941E+01 -5.6350E+01 1.7202E+01 19 2.3643E+00 -4.0187E+00 -8.4486E+00 2.0203E+01 20 -3.2707E-01 -6.7335E+00 1.0619E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.4438E+04 4.0223E+03 7.7375E+03 I/2PP 4.1612E+03 Nth COSINE SINE COSINE SINE 01 -5.1366E+02 1.5471E+03 -7.3662E+03 3.0963E+03 02 -2.1569E+03 -4.1660E+01 4.5157E+02 4.9265E+02 03 4.2932E+02 -1.2561E+03 1.2404E+03 -I.0794E+03 04 5.8316E+01 6.8041E+01 9.0828E+01 -1.5126E+02 05 -2.6488E+02 2.8452E+02 1.7365E+02 1.6916E+02 06 4.7881E+00 -9.2987E+01 -2.1575E+01 5.9371E+01 07 7.2077E+01 1.4330E+01 6.9773E+00 -5.2217E+01 08 3.0473E+01 -7.2856E+01 2.2155E+01 -I.0091E+01 09 4.5299E+01 -1.0279E+01 6.6945E+00 1.0795E+01 10 1.6466E+01 -2.7104E+00 6.8815E+01 4.8524E+01 11 1.1059E+01 -1.2044E+02 5.8976E+01 -4.2496E+00 12 6.9852E+01 -7.4164E+01 -1.3368E+01 -1.0523E+01 13 -2.0969E+01 1.1999E+01 4.4258E+00 -9.1869E+00 14 -7.8080E+00 2.0947E+00 1.2944E+01 -9.2329E+00 15 -5.9221E+00 1.8765E+01 -1.9187E+01 -1.5743E+01 16 -6.2711E+00 2.8978E+01 -8.1668E+00 5.2057E+00 17 4.8767E+01 -6.7455E+00 1.2606E+01 -5.4988E-01 18 1.5217E+01 9.8033E+00 -1.9631E+00 4.4025E+00 19 2.4220E+00 1.1584E+01 -1.7708E+00 6.4309E+00 20 -3.7284E+00 8.9044E+00 4.7972E+00 5.2091E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.4774E+04 2.1651E+03 I/2PP 2.5370E+03 7.1537E+03 Nth COSINE SINE COSINE SINE 01 -5.5492E+02 8.2817E+02 -5.8257E+03 3.3754E+03 02 -I.0809E+03 3.2242E+02 9.2053E+02 2.7295E+02 03 -3.7584E+02 1.1464E+03 -2.0610E+02 -1.2056E+03 04 3.1371E+02 -2.9683E+02 -9.3415E+02 -7.0446E+02 05 -4.9775E+02 3.0148E+02 6.3068E+01 1.2986E+00 06 -6.3718E-01 -1.0451E+02 -2.1966E+01 3.3851E+00 07 8.3384E+01 4.4518E+01 -I.II20E+01 9.7298E+00 08 5.3675E+01 -1.2072E+02 1.1819E+01 4.3901E+01 09 4.8668E+01 -2.6294E+01 -6.6533E+00 5.1408E+01 10 4.3208E+00 -1.5003E+01 -I.I198E+02 -6.6401E+01 11 5.6865E+00 -6.5796E+01 -9.0519E+01 -3.9153E+01 12 6.0982E+01 -6.0945E+01 8.4377E+00 -6.7993E+00 13 -5.6233E+01 -5.6417E-01 -1.4886E+01 1.3739E+01 14 -6.1782E+00 5.2759E+00 -2.8237E+00 7.7250E-01 15 3.5098E+00 -3.3386E+00 -2.2258E-01 -2.8769E+00 16 1.4525E+00 1.3694E+01 -2.8537E+00 -2.8257E+00 17 1.1621E+01 7.4562E+00 -I.0274E+01 3.2996E+00 18 6.1199E+00 6.6223E+00 2.2499E+01 -1.4676E+01 19 -3.9217E+00 -1.3754E+00 2.8077E+00 -6.4776E+00 -6.6163E+00 -5.5060E+00 20 5.0685E+00 2.6237E+00 7O Flat.Bending @31%R, Edg.Bending @31%R, in-lb

in-lb

-4.2653E+03

MEAN 1.1096E+04

9.3558E+03 1/2PP 3.4751E+03 COSINE SINE Nth COSINE SINE -6.1790E+03 5.0974E+03 01 9.0605E+02 -7.3801E+02 1.3016E+03 2.1433E+02 02 -7.2244E+02 8.3073E+02 03 -8.4105E+02 2.1376E+03 -1.8430E+03 -1.7971E+03 -1.9947E+03 -1.3475E+03 04 2.7820E+02 -4.6029E+02 -3.1156E+02 -1.9056E+02 05 -3.5188E+02 1.2625E+02 -1.0612E+01 -9.3293E+01 06 -3.9724E+01 -4.5905E+01 -4.0562E+01 2.7452E+01 07 4.6659E+01 1.5413E+01 2.6479E+00 4.4015E+01 08 4.9036E+00 -4.4031E+01 -1.6576E+00 4.6096E+01 09 9.4802E+00 -2.5068E+01 -1.8100E+02 -1.2079E+02 10 -1.8029E+01 -4.4689E+00 -1.8959E+02 -5.8410E+01 11 -1.1715E+01 6.1832E+01 3.3107E+01 5.9600E+00 12 -3.7013E+01 3.9929E+01 -2.5317E+01 3.1720E+01 13 -9.2538E+00 5.1775E+00 14 -7.2959E-01 9.5397E+00 -2.0095E+01 7.3911E+00 15 3.9039E+00 -1.5172E+01 3.4264E+01 3.6850E+01 16 4.3296E+00 -1.7968E+01 1.8360E+01 1.5554E+01 1.0428E+01 -8.6429E-01 17 -4.0110E+01 2.3535E+00 18 -1.5190E+01 -5.4363E+00 -5.9250E+00 9.7219E+00 19 -2.2007E+00 -8.2036E+00 -9.4684E-01 -2.1186E+00 -5.0128E+00 -3.7674E+00 20 5.2806E-01 -3.2265E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb 0.0000E+00 MEAN 4.5989E+03 0.0000E+00 1/2PP 5.2562E+03 COSINE SINE Nth COSINE SINE 0.0000E+00 0.0000E+00 01 2.4260E+03 -2.3363E+03 0.0000E+00 0.0000E+00 02 -1.3159E+03 7.5268E+02 0.0000E+00 0.0000E+00 03 -6.2788E+02 2.0054E+03 0.0000E+00 0.0000E+00 04 5.8259E+01 -2.5355E+02 05 1.1868E+02 -9.8561E+01 0.0000E+00 0.0000E+00 06 -6.0504E+01 1.2433E+01 0.0000E+00 0.0000E+00 07 -1.9133E+01 -5.9151E+01 0.0000E+00 0.0000E+00 08 -2.7904E+01 6.2975E+01 0.0000E+00 0.0000E+00 0.0000E+00 0.0000E+00 09 -3.9505E+01 3.1254E+01 0.0000E+00 0.0000E+00 10 -2.3545E+00 8.9486E+00 0.0000E+00 0.0000E+00 11 9.7411E+00 1.8700E+01 0.0000E+00 0.0000E+00 12 -1.7343E+01 2.1539E+01 0.0000E+00 0.0000E+00 13 2.9927E+01 -8.0288E+00 0.0000E+00 0.0000E+00 14 3.5381E+00 -6.7329E+00 0.0000E+00 0.0000E+00 15 -5.4605E+00 1.1696E+01 0.0000E+00 0.0000E+00 16 -5.0313E+00 1.4543E+01 0.0000E+00 0.0000E+00 17 2.4237E+01 -2.1682E+00 0.0000E+00 0.0000E+00 18 1.0609E+01 6.3491E+00 0.0000E+00 0.0000E+00 19 -1.1377E+00 5.7905E+00 0.0000E+00 0.0000E+00 20 -1.2050E+00 2.4924E+00 7] Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -8.1568E+00 -6.2643E+03 I/2PP 5.1675E+03 6.1378E+03 Nth COSINE SINE COSINE SINE 01 2.3040E+03 -2.2522E+03 -3.0227E+03 1.2412E+03 02 -2.1397E+03 4.5669E+02 5.8851E+02 2.0282E+02 03 -5.9069E+02 1.2780E+03 -2.2027E+03 -2.8143E+02 04 -1.8436E+02 3.4469E+02 -1.5031E+03 -8.5633E+02 05 1.0073E+02 -8.3840E+01 -8.4960E+02 -1.6411E+02 06 8.0647E+01 6.1595E+01 3.1205E+01 -1.4013E+02 07 -8.6324E+01 1.8205E+01 -1.2966E+01 -7.6503E+01 08 9.2933E-01 -1.5840E+01 -5.1540E+01 -9.5115E+01 09 5.0149E+00 1.3240E+01 3.5825E+01 -5.7101E+01 10 3.0990E+00 -4.4982E-01 1.9142E+02 1.1828E+02 11 2.2287E+00 -6.5112E+01 1.5295E+02 3.5762E+01 12 5.2138E+01 -4.5792E+01 -1.1113E+01 -1.1613E+01 13 -3.4423E+01 4.5804E+00 6.8204E+00 -2.3252E+01 14 -2.1693E+00 6.2969E+00 8.4403E+00 1.4733E+00 15 6.2117E+00 -1.9336E+00 -1.9126E+01 -2.3286E+01 16 6.1210E+00 -3.7391E+00 -1.0724E+01 -8.4841E+00 17 -9.5368E+00 4.4708E+00 -1.4311E+01 8.3274E-01 18 -4.7153E+00 -3.1978E+00 1.0647E+01 -7.3219E+00 19 3.9831E-01 -2.5812E+00 1.3538E-01 -3.2805E+00 20 5.9616E-01 6.5339E-02 8.6003E-01 2.4116E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -2.0004E+03 0.0000E+00 I/2PP 2.1138E+03 0.0000E+00 Nth COSINE SINE COSINE SINE 01 1.8994E+02 -4.0040E+02 0.0000E+00 0.0000E+00 02 -1.3605E+03 1.3298E+02 0.0000E+00 0.0000E+00 03 -3.7618E+02 3.8221E+02 0.0000E+00 0.0000E+00 04 -1.6497E+02 3.4799E+02 0.0000E+00 0.0000E+00 05 -6.3826E+01 1.1647E+02 0.0000E+00 0.0000E+00 06 2.8720E+01 -1.7558E+01 0.0000E+00 0.0000E+00 07 3.2648E+01 3.1351E+01 0.0000E+00 0.0000E+00 08 2.3405E+01 -2.3585E+01 0.0000E+00 0.0000E+00 09 7.4013E+00 -1.2531E+01 0.0000E+00 0.0000E+00 10 -4.1682E+00 -1.0904E+01 0.0000E+00 0.0000E+00 11 3.5173E+00 2.8662E+01 0.0000E+00 0.0000E+00 12 -2.2809E+01 2.3932E+01 0.0000E+00 0.0000E+00 13 1.0083E+01 -2.3475E+00 0.0000E+00 0.0000E+00 14 1.4870E+00 -3.3436E+00 0.0000E+00 0.0000E+00 15 -2.1975E+00 6.1409E-01 0.0000E+00 0.0000E+00 16 -2.1252E+00 -1.7543E-01 0.0000E+00 0.0000E+00 17 1.3691E+00 -1.8403E+00 0.0000E+00 0.0000E+00 18 1.6816E+00 7.7431E-01 0.0000E+00 0.0000E+00 19 6.8902E-03 1.0980E+00 0.0000E+00 0.0000E+00 20 -2.2769E-01 2.6297E-01 0.0000E+00 0.0000E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib 1.8032E+01 -I.I164E+03 4.6091E+01 3.9119E+02 COSINE SINE Nth COSINE SINE -4.0783E-01 4.1643E+00 01 2.0760E+01 1.9712E+01 2.9059E+00 8.9910E+00 02 -3.9433E+01 1.9178E+01 -3.3332E-01 -2.9946E+00 03 -1.6211E+01 3.8925E+01 -3.0149E+01 1.1864E+01 04 2.0206E+02 -2.5093E+02 1.9348E-01 1.1321E+00 05 5.4653E-01 -1.0058E+01 1.6252E-01 -7.1197E-01 06 -3.6682E+00 -1.1224E+01 -1.1209E+00 1.0996E-01 07 5.5666E+00 2.3141E-01 -5.1626E+00 1.8777E-01 08 -1.6730E+01 1.0140E+01 -1.0979E-01 -1.9892E-02 09 -3.2569E-01 -1.4126E+00 2.5332E-01 -2.0581E-01 10 3.4564E+00 2.9439E+00 3.2387E-01 6.9724E-01 11 3.2103E+00 -5.4705E+00 -2.1274E+00 4.3636E-01 12 1.4586E+01 3.0202E+01 -1.1997E-01 -4.8097E-02 13 -1.0737E+00 1.5068E+00 -1.5886E-02 2.9038E-01 14 2.0794E-01 -1.2066E+00 9.2610E-02 -2.4231E-01 15 -2.9521E-01 2.4572E-01 1.2327E+00 6.4681E-01 16 3.5557E+00 -2.9356E+00 2.5436E-02 -5.5368E-02 17 2.1383E+00 7.0368E-01 -1.3708E-01 1.9740E-01 18 -4.9296E-01 7.0310E-01 -1.1839E-01 -1.4028E-01 19 1.5924E+00 -4.3378E-01 1.6961E+00 7.2627E-01 20 -2.0456E+00 2.0696E+00 Lateral Spider Arm Load, Cyclic Load, ib lb 0.0000E+00 -5.8636E+01 MEAN 2.1482E+02 0.0000E+00 I/2PP SINE Nth COSINE SINE COSINE 4.2324E+01 01 0.0000E+00 0.0000E+00 1.5606E+02 6.3049E+01 02 0.0000E+00 0.0000E+00 -7.0432E+00 4.7722E+01 03 0.0000E+00 0.0000E+00 -1.8635E+01 -3.3017E+01 04 0.0000E+00 0.0000E+00 1.3283E+01 -4.6398E+00 05 0.0000E+00 0.0000E+00 -6.8967E+00 1.5688E+01 06 0.0000E+00 0.0000E+00 6.0414E+00 6.8955E+00 07 0.0000E+00 0.0000E+00 -7.0631E-01 1.1678E+00 08 0.0000E+00 0.0000E+00 1.5004E+00 -8.4376E-01 09 0.0000E+00 0.0000E+00 -8.4825E-01 1.1488E-01 10 0.0000E+00 0.0000E+00 3.6155E+00 8.9120E-01 11 0.0000E+00 0.0000E+00 2.5644E+00 1.9575E+00 12 0.0000E+00 0.0000E+00 1.3010E+00 -8.2233E-02 13 0.0000E+00 0.0000E+00 1.2234E+00 7.2000E-01 14 0.0000E+00 0.0000E+00 -6.5736E-01 -6.5645E-01 15 0.0000E+00 0.0000E+00 -1.1575E+00 3.3318E-01 16 0.0000E+00 0.0000E+00 -1.7290E-01 3.0872E-01 17 0.0000E+00 0.0000E+00 -6.5215E-02 -8.8606E-01 18 0.0000E+00 0.0000E+00 8.2627E-02 4.3291E-02 19 0.0000E+00 0.0000E+00 -2.1208E-01 5.3812E-03 20 0.0000E+00 0.0000E+00 4.3071E-01 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.6234E+01 5.3492E+02 I/2PP 5.9801E+00 1.3162E+03 Nth COSINE SINE COSINE SINE 01 8.1990E-01 -6.0574E+00 -4.2335E+02 1.1234E+03 02 3.2885E-01 4.2989E-01 7.4939E+01 -1.8907E+00 03 1.9186E-01 -3.9291E-01 -1.1444E+02 -1.9913E+02 04 -5.0363E-02 -8.6723E-02 -1.2440E+02 -3.2850E+01 05 1.4587E-01 5.5740E-02 9.4154E+01 -3.6655E+01 06 6.9814E-02 1.9491E-02 3.2977E+00 -3.1292E+01 07 -4.4592E-02 1.4673E-02 -3.6381E+00 3.4317E+01 08 -2.4477E-02 7.5549E-02 -5.9377E-02 1.3045E+01 09 1.8936E-02 -3.9895E-02 -3.0073E+00 -1.4492E+01 10 3.8596E-03 -5.5803E-03 -1.5844E+01 -1.0458E+01 11 3.4137E-02 7.7612E-03 -7.2199E+00 -6.7367E+00 12 2.5944E-02 -5.1168E-03 1.1272E+01 -3.5595E+00 13 3.0580E-02 -2.9155E-02 2.9061E+00 -1.4248E+00 14 -7.2470E-03 2.6007E-02 -2.9030E+00 6.0044E+00 15 7.4214E-03 1.5938E-02 -1.8531E-01 2.9724E+00 16 4.3704E-04 3.3559E-04 -1.7395E+00 -4.1607E+00 17 -7.3336E-03 2.5101E-03 -5.2305E+00 -4.3428E-01 18 -1.2073E-02 4.2437E-05 3.6001E+00 -2.1425E+00 19 2.3489E-03 -1.3148E-02 3.0018E-01 -2.0706E+00 20 -9.4233E-03 6.6149E-03 -9.5946E-01 1.0981E+00 MR Shaft Torque, in-lb MEAN 1.9360E+05 1/2PP 2.1121E+04 Nth COSINE SINE 01 6.5857E+02 1.7892E+03 02 6.8981E+03 8.2295E+03 03 3.6731E+02 7.3437E+02 04 7.4059E+03 7.0996E+03 05 3.3432E+01 -1.4306E+01 06 1.1521E+03 1.3211E+03 07 2.1324E+02 7.4680E+01 08 -3.1465E+02 -2.2475E+02 09 -3.1823E+01 -3.3923E+01 10 -5.9217E+01 2.3105E+02 11 -2.3451E+01 2.5064E+01 12 -7.5394E+01 5.2011E+02 13 3.7521E+01 7.2173E+01 14 -3.4986E+02 -7.0835E+01 15 3.7269E+01 3.7161E+01 16 6.0783E+01 2.9582E+01 17 2.7070E+01 2.0739E+01 18 -2.8058E+01 5.2272E-01 19 2.9315E+01 2.8067E+01 20 2.3012E+01 1.2484E+01 Flight 487, Condition H Edg.Bending @6.8%R, Flat.Bending @3.2%R, in-lb in-lb 1.0422E+04 MEAN 1.5855E+04 2.2885E+04 1/2PP 3.0425E+04 COSINE SINE Nth COSINE SINE -1.9201E+04 3.1694E+03 01 3.6434E+02 8.3400E+03 3.9850E+03 3.6627E+03 02 -1.0448E+04 -5.9661E+03 6.2320E+02 2.8516E+03 03 7.6724E+03 -1.3025E+04 -3.0246E+03 4.0949E+02 04 -1.7389E+03 2.8960E+03 -3.1401E+02 1.1718E+03 05 1.9937E+03 4.5092E+02 2.2943E+02 -6.1012E+02 06 -4.3670E+02 5.1406E+02 -1.3730E+02 4.3693E+02 07 1.3549E+02 -5.1904E+02 -5.8338E+01 -3.7455E+02 08 -7.4537E+01 4.1149E+02 2.4279E+02 1.6179E+02 09 -1.5475E+01 -9.7595E+01 8.9862E+01 -1.9533E+02 10 8.3256E+00 9.8171E+01 -6.4890E+00 2.4032E+02 11 -3.8902E+01 -2.1973E-02 6.5380E+01 -1.5611E+02 12 -3.0143E+02 7.2400E+01 -5.7686E+01 1.3685E+02 13 9.3047E+01 -4.0020E+01 6.6610E+01 -1.9916E+02 14 -4.6904E+01 2.0011E+01 -3.8750E+01 1.3870E+02 15 1.4047E+01 -5.5141E+01 3.8049E+00 -1.3711E+02 16 -2.7099E+01 -1.1772E+01 17 8.3442E+00 -5.6144E+01 -9.0650E+00 1.1801E+02 2.7077E+01 -1.2588E+02 18 -1.0790E+01 2.8810E+01 -4.4863E+01 1.1005E+02 19 3.2442E+01 -2.4404E+01 4.9876E+01 -9.5140E+01 20 -1.4973E+01 2.4666E+01 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb 8.9447E+03 MEAN 1.4713E+04 9.4295E+03 1/2PP 6.3981E+03 COSINE SINE Nth COSINE SINE -8.9830E+03 3.6868E+03 01 1.1906E+03 2.2777E+03 5.0468E+02 6.9547E+02 02 -3.2879E+03 -5.9782E+02 1.7336E+03 -1.4195E+03 03 1.0146E+03 -1.6489E+03 04 -6.1797E+00 1.6572E+02 1.7645E+02 -1.5509E+02 4.6334E+02 4.4331E+02 05 -6.2154E+02 9.4391E+01 1.1705E+01 1.1470E+01 06 9.6574E+01 -2.0742E+02 -1.5976E+01 -3.9895E+01 07 -1.6756E+01 1.6447E+02 -4.7352E+01 1.7353E+01 08 -2.1615E+01 -1.8100E+02 2.2928E+01 8.4590E+00 09 3.8635E+01 3.0985E+01 5.8025E+01 -3.5368E+01 10 -3.7679E+01 -3.4139E+01 5.6464E+01 3.6361E+01 11 8.0774E+01 -1.2072E+02 1.6672E+01 2.6611E+01 12 2.0622E+02 -1.3341E+01 -9.4149E+00 1.1002E+01 13 -1.6285E+01 2.1244E+01 -1.3449E+01 -1.9742E+01 14 2.8590E+01 6.5633E+00 -1.3135E+01 -3.4580E+01 15 -4.0655E+00 2.8485E+01 -8.7394E+00 1.4836E+01 16 1.5719E+01 2.0874E+01 1.4818E+01 2.8179E+00 17 1.9562E+01 1.2557E+01 -8.9971E+00 3.0455E+00 18 4.8425E+00 8.5821E+00 5.6611E+00 1.3233E+01 19 -7.2171E+00 7.7812E+00 -1.2164E+01 -1.1474E+01 20 -4.1430E+00 -5.7103E-01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.5476E+04 5.3547E+03 8.8253E+03 I/2PP 4.1231E+03 Nth COSINE SINE COSINE SINE -7.1266E+03 3.7108E+03 01 5.4317E+02 1.3413E+03 02 -1.6748E+03 2.4875E+02 1.1533E+03 4.8438E+02 03 -7.9615E+02 1.2812E+03 -1.0712E+01 -1.8335E+03 04 2.7054E+02 -6.8827E+02 -1.1969E+03 -1.0700E+03 05 -1.2922E+03 -2.6639E+01 1.8968E+02 1.4944E+02 06 1.6910E+02 -2.8091E+02 -3.0084E+01 -1.7485E+01 07 -2.1295E+01 2.7245E+02 4.9384E+01 2.7575E+00 08 1.9308E+01 -2.7053E÷02 3.0624E+00 1.2217E+02 09 3.6463E+01 4.7653E+01 1.3882E+01 4.2132E+01 10 -2.8770E+01 -6.7803E+01 -8.7741E+01 1.1804E+01 11 3.4651E+01 -4.7732E+01 -5.5413E+01 -7.9321E+01 12 1.8661E+02 -3.6513E+01 2.5993E+01 -7.7602E+00 13 -6.2133E+01 5.8299E-01 -2.1177E+01 2.0458E+00 14 2.7263E+01 -6.2957E+00 5.3946E+00 7.3798E+00 15 7.5210E+00 1.2270E+01 5.2016E+00 3.5481E+00 16 6.4070E+00 -2.9459E+00 -1.9415E+00 1.5952E+00 17 2.4431E+00 2.0972E+01 1.3842E+01 -1.6827E+00 18 7.7085E+00 -6.2047E+00 -3.3439E+00 -4.9492E+00 19 -1.1289E+01 1.6169E+01 -1.5406E+01 -6.1050E+00 20 7.4599E+00 -7.8652E+00 1.3920E+01 -8.8939E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.1725E+04 -1.7683E+03 I/2PP 5.4386E+03 1.1423E+04 Nth COSINE SINE COSINE SINE 01 1.6216E+03 -4.5146E+02 -7.1264E+03 5.4970E+03 02 -I.0232E+03 1.0531E+03 1.5279E+03 3.6100E+02 03 -1.7541E+03 2.5091E+03 -1.8814E+03 -2.9065E+03 04 2.2365E+02 -1.0021E+03 -2.6580E+03 -2.1321E+03 05 -1.0746E+03 -1.1496E+02 -5.3760E+02 -3.3826E+02 06 4.4247E+01 -1.5701E+02 1.3322E+01 -7.3253E+01 07 4.7386E+01 1.1665E+02 4.4260E+01 5.9017E+01 08 2.8824E+01 -7.9792E+01 5.2573E+01 7.1391E+01 09 3.9685E+00 1.4423E+01 1.0741E+01 4.3629E+01 10 -2.4380E+00 -5.8121E-01 -1.7676E+02 4.8305E+01 11 -5.8555E+01 7.5879E+01 -1.1949E+02 -1.5953E+02 12 -9.3984E+01 -2.5956E+01 5.6593E+01 -4.3205E+01 13 -1.3122E+01 -3.6686E+00 -1.4665E+01 1.7284E+01 14 -1.2377E+01 -1.2765E+01 2.3010E+01 3.7292E+01 15 2.8830E+00 -9.8744E+00 2.6315E+01 6.5696E+01 16 -5.6986E+00 -2.9561E+01 2.3600E+01 -9.6522E+00 17 -2.5829E+01 -1.9506E-01 -9.4147E+00 1.0078E+01 18 -1.8007E+00 -1.5886E+01 5.1592E+00 -5.9910E+00 19 4.9825E+00 6.5275E+00 -1.3618E+00 -1.5836E+00 20 3.6146E+00 -6.6113E+00 6.0605E+00 -1.5477E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb 0.0000E+00 MEAN 4.9724E+03 0.0000E+00 I/2PP 6.0097E+03 Nth COSINE SINE COSINE SINE 01 2.8880E+03 -2.1452E+03 0.0000E+00 0.0000E+00 02 -1.5950E+03 1.0549E+03 0.0000E+00 0.0000E+00 03 -1.2291E+03 2.2606E+03 0.0000E+00 0.0000E+00 04 4.3389E+01 -4.4128E+02 0.0000E+00 0.0000E+00 05 1.4690E+02 -2.3589E+01 0.0000E+00 0.0000E+00 06 -1.1942E+02 8.0642E+01 0.0000E+00 0.0000E+00 07 4.8665E+01 -1.6563E+02 0.0000E+00 0.0000E+00 08 -8.7833E+00 1.2209E+02 0.0000E+00 0.0000E+00 09 -2.9223E+01 -1.5472E+01 0.0000E+00 0.0000E+00 10 1.0831E+01 -4.4006E+00 0.0000E+O0 0.0000E+00 11 -1.5721E+00 2.5934E+01 0.0000E+00 0.0000E+00 12 -6.5269E+01 1.7929E+01 0.0000E+00 0.0000E+00 13 3.3566E+01 1.0994E+01 0.0000E+00 0.0000E+00 14 -5.9834E-01 -2.3190E+00 0.0000E+00 0.0000E+00 15 -6.4743E+00 1.5531E+01 0.0000E+00 0.0000E+00 16 2.5534E+00 1.0857E+01 0.0000E+00 0.0000E+00 17 1.7789E+01 7.2838E+00 0.0000E+00 0.0000E+00 18 1.3357E+00 4.6568E+00 0.0000E+00 0.0000E+00 19 -4.0056E+00 3.4103E+00 0.0000E+00 0.0000E+00 20 -1.5965E+00 -5.3843E-01 0.0000E+00 0.0000E+00 Edg.Bending @64%R, Flat.Bending @64%R, in-lb in-lb MEAN 2.1339E+02 -5.4208E+03 7.9599E+03 1/2PP 5.9192E+03 SINE Nth COSINE SINE COSINE -3.3178E+03 1.6795E+03 01 2.4691E+03 -2.2082E+03 6.0940E+02 1.6124E+02 02 -2.6056E+03 5.2887E+02 03 -8.2058E+02 1.2758E+03 -2.6186E+03 -1.0623E+03 04 -1.4567E+02 4.6244E+02 -2.1516E+03 -1.4340E+03 05 4.0937E+02 5.4235E+01 -1.4290E+03 -4.8396E+02 -4.8212E+01 06 4.2121E+01 9.5379E+01 1.4848E+02 07 -8.8004E+01 -2.7010E+01 -1.0033E+02 -8.6450E+01 08 2.9309E-01 -2.6229E+01 -4.9548E+01 -3.2390E+02 09 2.2266E+01 -4.4317E+00 -1.7533E+01 -2.2219E+01 10 -3.8743E+00 -I.0367E+01 1.5430E+02 -4.1450E+01 11 5.0696E+01 -7.7498E+01 9.1024E+01 1.2648E+02 12 1.4493E+02 -1.1862E+00 5.0205E+00 2.1922E+00 13 -3.7211E+01 -1.3951E+01 8.3308E-03 -2.5175E+00 -6.6716E+00 -3.0364E+01 14 1.1018E+01 3.7015E+00 15 8.7910E+00 -9.1956E+00 -1.3188E+01 -3.8738E+01 -6.0505E-01 16 1.1117E+00 -3.2930E+00 -1.5674E+01 -5.2233E-01 17 -8.9699E+00 -4.9278E+00 -2.7116E+00 -2.6647E+00 18 -2.1575E-01 -1.1189E+00 1.3281E+00 2.3869E+00 -8.6708E+00 19 1.6530E+00 -1.9314E+00 1.4633E+00 -2.6103E+00 20 -5.8963E-01 3.4031E+00 Flat.Bending @81%R, Edg.Bending @81%R,

in-lb in-lb

MEAN -2.0292E+03 0.0000E+00

0.0000E+00 1/2PP 2.5821E+03 Nth COSINE SINE SINE COSINE 0.0000E+00 01 1.0837E+02 -4.4808E+02 0.0000E+00 02 -1.7818E+03 -2.3292E+01 0.0000E+00 0.0000E+00 03 -2.9305E+02 1.9436E+02 0.0000E+00 0.0000E+00 04 -1.3676E+02 5.2440E+02 0.0000E+00 0.0000E+00 05 5.9135E+01 1.2893E+02 0.0000E+00 0.0000E+00 0.0000E+00 06 3.6897E+01 -4.9648E+01 0.0000E+00 07 -2.9427E+00 9.6116E+01 0.0000E+00 0.0000E+00 08 -4.3482E-01 -3.0577E+01 0.0000E+00 0.0000E+00 0.0000E+00 0.0000E+00 09 -7.7925E+00 1.8549E+01 10 -6.9224E+00 5.7475E+00 0.0000E+00 0.0000E+00 11 -1.8259E+01 3.7658E+01 0.0000E+00 0.0000E+00 12 -6.1693E+01 5.6413E+00 0.0000E+00 0.0000E+00 13 1.3526E+01 3.9359E+00 0.0000E+00 0.0000E+00 14 -5.1497E+00 -1.4286E+00 0.0000E+00 0.0000E+00 15 -2.0130E+00 3.7501E+00 0.0000E+00 0.0000E+00 16 -1.5140E+00 -3.1182E-01 0.0000E+00 0.0000E+00 17 4.0229E+00 1.0476E+00 0.0000E+00 0.0000E+00 18 -7.8876E-01 7.4322E-01 0.0000E+00 0.0000E+00 19 -6.2087E-01 4.1409E-01 0.0000E+00 0.0000E+00 20 -1.2041E-01 -1.3748E+00 0.0000E+00 0.0000E+00 Collective Control Longitudinal Cyclic Load, ib Load, Ib MEAN -1.3934E+03 -2.1101E+01 I/2PP 8.8259E+02 8.4934E+01 Nth COSINE SINE COSINE SINE 01 4.0306E+01 7.8585E+00 -5.6287E+00 1.0781E+01 02 -9.8849E+01 1.7867E+01 1.8424E+00 1.3528E+01 03 -6.8718E+00 3.9803E+01 -1.3112E+00 -7.3755E+00 04 6.4204E+02 -4.4191E+02 -5.6374E+01 -8.1613E+00 05 -1.3140E+01 1.3446E+00 9.6008E-01 2.5788E+00 06 2.3209E+01 -5.1292E+00 -1.7957E-01 9.0151E-01 07 -1.7190E+01 1.1752E+01 -6.1851E-01 -7.0136E-01 08 -4.3864E+01 -2.8299E+01 -5.6187E+00 -1.1353E+01 09 7.0305E-01 5.2942E+00 -4.8175E-01 5.2737E-01 10 1.3707E+01 -9.1958E+00 -4.0629E-01 5.5329E-01 11 -5.5455E+00 6.3072E+00 1.1919E+00 1.0191E+00 12 -3.3775E+01 5.0241E+01 -1.1111E+00 -1.6591E+00 13 6.0745E-01 -3.7367E-01 -3.7445E-01 4.1653E-01 14 -2.9278E-01 -7.5761E-01 -6.0727E-01 -3.4467E-01 15 -1.4727E+00 -1.4720E+00 2.7609E-02 9.7703E-01 16 -8.0924E-02 -8.4549E+00 1.3959E+00 3.8096E+00 17 1.0596E+00 4.5950E+00 -1.0699E-01 -1.4885E-01 18 -7.0655E-01 1.4685E+00 -6.9817E-01 2.2290E-02 19 -4.2778E-01 2.2275E+00 -2.2394E-01 7.8124E-01 20 -3.2456E+00 -5.1942E+00 -1.5613E-01 3.3823E+00 Spider Arm Load, Lateral Cyclic Load, ib lb -7.8808E+01 0.0000E+00 2.9009E+02 0.0000E+00 Nth COSINE SINE COSINE SINE 01 0.0000E+00 0.0000E+00 1.8999E+02 2.2869E+01 02 0.0000E+00 0.0000E+00 -3.1000E-01 9.7124E+01 03 0.0000E+00 0.0000E+00 -6.0445E+01 8.5764E+01 04 0.0000E+00 0.0000E+00 4.8180E+01 -5.5231E+01 05 0.0000E+00 0.0000E+00 -7.4623E+00 -1.0343E+01 06 0.0000E+00 0.0000E+00 7.2480E+00 -3.2927E-01 07 0.0000E+00 0.0000E+00 -1.0833E+01 1.1140E+01 08 0.0000E+00 0.0000E+00 1.3288E-01 2.1116E+00 09 0.0000E+00 0.0000E+00 1.7638E+00 7.2510E-01 10 0.0000E+00 0.0000E+00 3.0315E+00 2.8123E+00 11 0.0000E+00 0.0000E+00 1.8779E+00 1.7140E+00 12 0.0000E+00 0.0000E+00 2.0223E+00 2.0215E+00 13 0.0000E+00 0.0000E+00 5.3465E-01 2.9390E+00 14 0.0000E+00 0.0000E+00 -2.6667E+00 2.3517E+00 15 0.0000E+00 0.0000E+00 -8.7809E-01 -6.1178E-01 16 0.0000E+00 0.0000E+00 -2.5240E-01 1.7991E+00 17 0.0000E+00 0.0000E+00 -1.9482E-01 1.1339E+00 18 0.0000E+00 0.0000E+00 1.1154E-01 -1.6591E+00 19 0.0000E+00 0.0000E+00 3.8379E-01 6.9102E-01 20 0.0000E+00 0.0000E+00 1.1186E-01 1.1340E+00 Blade Feathering Lag Damper Load, lb Angle, deg 5.7456E+02 1.8046E+01 MEAN 1.3897E+03 7.6841E+00 1/2PP SINE SINE COSINE Nth COSINE 1.1372E+03 -5.1726E+00 -3.5574E+02 01 -5.6161E+00 -3.3899E+00 -7.4950E-01 1.1767E+02 02 3.6274E-01 -2.2917E+02 1.5724E-01 -9.7668E+01 03 -3.9142E-01 -4.9989E+01 04 5.4864E-02 2.3922E-01 -1.5374E+02 -5.3527E+01 05 1.9076E-02 1.6310E-01 1.4648E+02 -6.1338E+01 2.7134E-02 -1.2549E+01 06 1.0323E-01 4.4981E+01 -1.4889E-02 1.7250E+01 07 -4.1581E-02 1.9728E+01 -1.7345E-03 1.6525E+01 08 2.1587E-02 -6.7998E+00 -1.8009E-02 -6.4655E+00 09 -3.2532E-02 9.2749E+00 10 -4.8116E-02 2.8667E-02 -3.0970E+01 -1.1502E+01 11 -9.6048E-03 4.9837E-04 -2.4050E+00 -1.5955E+01 2.0562E-02 2.0328E+01 12 -1.3394E-02 -8.8386E-03 7.0683E+00 2.7858E+00 13 -6.2509E-03 1.3694E+01 6.3351E-04 6.9986E+00 14 -1.1850E-02 7.4059E-01 1.0332E-02 1.7173E+00 15 1.4099E-02 1.5609E+00 -3.7594E-03 -1.0098E+01 16 -3.7806E-03 -4.2184E+00 -1.2348E-02 -6.3238E+00 17 4.7055E-03 -3.7996E+00 -2.0540E-03 1.4878E+00 18 5.1813E-03 -3.0814E+00 -3.2375E+00 19 -3.0131E-03 5.1755E-03 4.2405E-01 3.4836E+00 20 1.3867E-02 5.5012E-03 MR Shaft Torque, in-lb MEAN 0.0000E+00 1/2PP 0.0000E+00 Nth COSINE SINE 01 0.0000E+00 0.0000E+00 02 0.0000E+00 0.0000E+00 03 0.0000E+00 0.0000E+00 04 0.0000E+00 0.0000E+00 05 0.0000E+00 0.0000E+00 06 0.0000E+00 0.0000E+00 07 0.0000E+00 0.0000E+00 08 0.0000E+00 0.0000E+00 09 0.0000E+00 0.0000E+00 10 0.0000E+00 0.0000E+00 11 0.0000E+00 0.0000E+00 12 0.0000E+00 0.0000E+00 13 0.0000E+00 0.0000E+00 14 0.0000E+00 0.0000E+00 15 0.0000E+00 0.0000E+00 16 0.0000E+00 0.0000E+00 17 0.0000E÷00 0.0000E+00 18 0.0000E+00 0.0000E+00 19 0.0000E+00 0.0000E+00 20 0.0000E+00 0.0000E+00 8O Flight 497, Condition A Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 2.1972E+04 -9.3135E+03 I/2PP 6.2215E+03 2.0906E+04 Nth COSINE SINE COSINE SINE 01 -2.3892E+03 -2.5600E+02 -1.5685E+04 9.2270E+03 02 -1.8780E+03 1.3098E+03 1.1985E+03 1.2926E+03 03 2.5123E+03 -2.3519E+03 2.2361E+03 -2.1919E+01 04 6.1818E+02 6.4324E+02 -1.2946E+02 3.2890E+02 05 -1.3093E+02 -9.6408E+02 1.3515E+03 3.4134E+02 06 7.5013E+02 -1.8090E+02 2.5769E+02 -1.8644E+01 07 4.0809E+02 -1.7776E+02 -6.8139E+01 -8.4889E+01 08 4.3613E+02 -9.6108E+01 -5.2475E+01 1.9756E+01 09 1.8354E+01 -1.7516E+02 4.4323E+01 1.3566E+02 10 -1.0903E+02 -1.7769E+01 -6.0979E+02 -2.8784E+02 11 -1.9353E+02 -6.2774E+01 -3.6851E+02 3.3760E+02 12 -2.4060E+02 7.3362E+00 1.1668E+02 9.5830E+01 13 -1.2238E+02 1.0607E+02 -6.7287E+01 1.5161E+02 14 -5.0682E+01 4.3732E+01 -1.0413E+01 -1.7601E+01 15 3.1690E+01 -3.0754E+01 1.9020E+01 -3.4843E+01 16 1.1239E+02 -2.3936E+01 3.7557E+01 -2.5242E+00 17 9.6010E+01 8.5184E+01 -5.1042E+01 -2.4772E+01 18 -1.7325E+01 -5.7866E+01 -1.4883E+02 3.9379E+01 19 1.0488E+01 -6.0192E+01 -7.1334E+01 -5.0502E+01 20 1.0804E+01 -3.7353E+00 7.7798E+00 1.4253E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.7972E+04 -1.6244E+03 I/2PP 2.0788E+03 8.3496E+03 Nth COSINE SINE COSINE SINE 01 -6.2231E+02 -2.8133E+02 -7.8604E+03 1.9283E+03 02 -8.3499E+02 7.4020E+02 4.2916E+02 6.4853E+02 03 2.2941E+02 -2.6778E+02 9.6383E+02 1.8095E+01 04 3.9173E+01 3.0550E+01 1.4730E+02 -8.1136E+01 05 -3.3241E+01 2.4753E+02 1.9505E+02 8.2177E+01 06 -2.4686E+02 6.1533E+01 2.1231E+01 -5.4563E+00 07 -2.2389E+02 6.3588E+01 4.9841E+01 -7.1149E+01 08 -2.1713E+02 6.8824E+01 -1.7983E+01 -3.0903E+01 09 7.7097E+00 7.2584E+01 -1.2253E+01 2.1830E+01 10 8.0155E+01 1.6329E+01 -1.2560E+02 1.7682E+01 11 2.2625E+02 1.0665E+01 -4.8072E+01 7.1694E+01 12 1.7548E+02 4.4279E+00 4.5171E+01 -4.5150E+00 13 1.1201E+02 -8.9459E+01 9.0329E+00 2.1909E+01 14 3.1114E+01 -4.7734E+01 8.1535E+00 1.0151E+01 15 -4.4938E+01 1.6642E+01 -2.9192E+00 2.6501E+00 16 -1.0454E+02 4.4815E+01 -1.3415E+01 -1.6223E+01 17 -I.0254E+02 -9.7989E+01 -6.7994E-01 -1.2337E+01 18 3.1636E+01 7.4497E+01 1.1235E+01 1.2139E+01 19 -1.6941E+00 5.9260E+01 -1.3141E+01 1.0166E+00 20 -8.2499E+00 8.9160E+00 1.6554E+00 -5.8557E-03 8] Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.6564E+04 -2.1203E+03 1/2PP 2.5418E+03 7.1727E+03 Nth COSINE SINE COSINE SINE 01 -1.0932E+03 -2.7534E+02 -6.0324E+03 2.8423E+03 02 -5.5196E+02 3.2387E+02 6.3172E+02 3.4711E+02 03 -3.6082E+02 2.6426E+02 2.4335E+02 -3.7840E+02 2.5163E+02 -4.9807E+02 04 -1.2876E+02 -2.0882E+02 05 -1.5693E+01 5.0688E+02 -8.0570E+01 -1°0483E+02 06 -4.7847E+02 9.7093E+01 1.2379E+01 -3.3823E+01 07 -3.1531E+02 1.1075E+02 7.6268E+01 -1.9635E+01 08 -3.1837E+02 8.0462E+01 -2.0626E+01 -5.4581E+01 09 -1.7662E+00 1.1471E+02 -2.8033E+01 -7.8648E+01 10 1.0699E+02 2.9820E+01 2.1465E+02 5.0663E+01 11 1.7776E+02 -2.8757E+00 1.1342E+02 -1.1876E+02 12 1.5687E+02 -2.0916E+01 -1.8036E+01 -1.0265E+01 13 7.0558E+01 -7.9623E+01 1.3392E+01 -4.1607E+01 14 8.0267E+00 -2.7733E+01 4.9562E+00 3.9196E+00 15 -1.1263E+01 1.2364E+01 1.1785E+00 1.1786E+01 16 -3.4149E+01 2.8030E+01 1.6455E+00 1.9242E+00 17 -2.8031E+01 -9.4755E+00 1.8792E+01 3.3214E+00 18 1.5028E+01 4.2345E+00 6.3482E+01 -3.4008E+01 19 1.1167E+01 2.8101E+00 3.7832E+01 2.6258E+01 20 6.1758E+00 1.6083E-01 -5.0539E+00 -3.6615E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.1548E+04 -6.6000E+03 I/2PP 2.3905E+03 8.4439E+03 Nth COSINE SINE COSINE SINE 01 -5.2347E+02 -8.2866E+02 -5 .8447E+03 4.2512E+03 02 -6.7071E+02 -1.3239E+02 9 .2337E+02 3.4929E+02 03 -8.0933E+02 4.2145E+02 -4 .5537E+02 -8.7099E+02 04 -2.0534E+02 -3.6732E+02 3 .7604E+02 -8.6698E+02 05 5.7446E+01 3.8178E+02 -4 .5744E+02 -3.0815E+02 06 -3.3009E+02 7.4725E+01 -8 .6544E+01 -2.3771E+01 07 -1.1350E+02 1.2081E+02 -7 .4270E+00 7.9295E+01 08 -1.1869E+02 5.2689E+01 -3 .7243E+01 -2.3511E+01 09 5.9975E+00 7.0537E+00 5 .2251E+00 -8.3907E+01 10 1.5645E+01 -7.0988E+00 3 .8197E+02 6.1647E+01 11 -9.9995E+01 -5.2054E+01 2 .1762E+02 -2.0283E+02 12 -8.2103E+01 -5.1437E+01 -5 .3209E+01 -6.7596E+00 13 -6.7407E+01 2.3409E+01 1 .1590E+01 -7.4355E+01 14 -2.1931E+01 2.2102E+01 I .7617E+00 -2.6882E+01 15 4.2585E+01 -9.0168E+00 -1 .9530E+01 8.5193E+00 16 8.8441E+01 -3.2376E+01 -1 .4911E+01 3.7126E+01 17 8.7583E+01 8.2717E+01 -4 .0505E+01 -9.3950E+00 18 -2.6927E+01 -5.5442E+01 -4 .7688E+01 2.8884E+01 19 -5.5022E+00 -4.2236E+01 -8 .0613E+00 1.5756E+00 20 8.0710E-01 -1.3099E+01 -i .0233E+00 5.2656E+00 Flat.Bending @48%R, Edg.Bending @48%R,

in-lb in-lb

MEAN 4.6300E+03 -4.0262E+03

I/2PP 3.1593E+03 6.6495E+03

Nth COSINE SINE COSINE SINE

01 2.1581E+02 -1.7273E+03 -3.6917E+03 2.3700E+03

02 -I.1411E+03 -3.6208E+02 8.8800E+02 1.6358E+02

03 -9.2074E+02 4.9080E+02 -I.0621E+03 -9.0684E+02

04 -1.8640E+02 -1.3038E+02 3.8564E+02 -8.6889E+02

05 8.7065E+01 -1.8310E+01 -9.7977E+02 -5.6334E+02

06 1.4110E+02 -5.5676E+01 -I.I154E+02 -5.3310E+00

07 1.9125E+02 -9.6969E+01 -I.1780E+02 1.2920E+02

08 2.7094E+02 -3.1768E+01 9.3183E+01 6.4941E+01

09 1.4715E+01 -2.8244E+01 3.7739E+01 3.4271E+01

i0 -7.6468E+01 -3.9804E+01 -5.3138E+01 -3.5124E+01

ii -5.7818E+01 4.3366E+01 -1.3154E+01 -1.0669E+01

12 -4.9450E+01 8.7603E+01 -3.8467E+01 -1.3965E+01

13 -2.0263E+01 6.6021E+01 -I.1653E+01 -1.7142E+01

14 -5.6345E+00 -1.9361E+01 -2.4244E+00 -4.2285E+01

15 -2.9307E+01 -3.9817E+00 -3.4254E+01 -2.6831E+01

16 -6.7786E+01 1.3624E+01 -5.1485E+01 1.4666E+01

17 -6.7121E+01 -6.6344E+01 -9.2490E+01 -4.0449E+01

18 2.2434E+01

3.2803E+01 -1.8124E+02 1.0328E+02

19 6.0170E-01 3.6684E+01 -8.8051E+01 -5.7259E+01

20 -3.9083E+00 6.6458E+00 1.3261E+01 1.4806E+01

Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -1.7937E+02 -6.9077E+03 4.4631E+03 I/2PP 3.6719E+03 Nth COSINE SINE COSINE SINE 01 2.5998E+02 -1.4738E+03 -2. 0647E+03 9.8993E+02 02 -1.6847E+03 -4.2588E+02 6. 8361E+02 -5.0772E+01 0750E+03 -7.0497E+02 03 -9.5947E+02 5.7262E+02 -i.

04 -5.7318E+01 1.3147E+02 2. 0542E+02 -6.1222E+02 05 -5.6820E+01 -1.2278E+02 -8. 8453E+02 -4.9408E+02 06 2.2503E+02 2.7622E+01 -3. 7659E+01 -2.1681E+01 07 4.9517E+01 -5.7788E+01 -I. 8489E+02 9.8208E+01 0174E+02 9.6284E+01 08 -2.6137E+01 -6.3037E+01 i.

09 -3.2889E+01 1.1435E+01 5. 9162E+01 1.2586E+02 i0 3.4692E+01 6.1864E+01 -3. 3272E+02 -7.9912E+01 ii 9.8721E+01 -2.4556E+00 -I. 5742E+02 1.7446E+02 12 1.0986E+02 -7.9241E+01 8. 8727E+01 1.2579E+01 13 8.0699E+01 -9.8828E+01 i. I093E+01 4.1468E+01 14 1.5828E+01 1.0876E+01 4. 7190E+00 1.1372E+01 15 -3.7492E+00 1.2199E+01 6. 0517E+00 4.9726E+00 16 3.1825E+01 -4.2587E+00 I. 5109E+01 -1.4146E+01 17 4.3339E+01 3.8385E+01 3. 6911E+01 2.1767E+01 18 -2.0573E+00 -5.9215E+00 5. 6132E+01 -3.7632E+01 19 -1.9258E+00 -1.8104E+01 i. 7556E+01 4.0172E+00 20 2.5123E+00 -I.0029E+01 -2. 8874E+00 -9.6183E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb -3.9999E+03 -6.6234E+03 3.6931E+03 2.2330E+03 Nth COSINE SINE COSINE SINE 01 1.7748E+02 -3.0571E+02 -7.6496E+02 -1.1793E+02 02 -1.7767E+03 -2.6353E+02 1.7511E+02 -2.5141E+01 03 -1.1248E+03 4.4368E+02 -5.9895E÷02-3.7228E+02 04 2.0094E+02 4.1286E+02 7.2630E+01-2.7683E+02 05 8.6635E+01 -1.3574E+02 -4.0536E+02 -2.4473E+02 06 -8.9015E+01 -7.6633E+00 4.1088E+01 -1.1677E+01 07 -2.4101E+02 1.1484E+02 -1.8626E+02 -5.2810E+00 08 -1.7489E+02 5.5632E+01 -5.4442E+01 8.6525E+01 09 2.0052E+01 -2.1427E+01 4.6229E+01 1.3628E+02 10 1.2606E+00 -1.8980E+01 -2.0916E+02 -9.3007E+01 11 -6.3784E+01 5.3904E+00 -1.5828E+02 1.3161E+02 12 -5.5350E+01 2.9459E+01 5.1726E+01 3.3660E+01 13 -4.9758E+01 6.6245E+01 -1.0290E+01 8.7710E+01 14 -2.8357E+01 7.8105E+00 1.1494E+01 4.6422E+01 15 8.0074E+00 -1.6958E+01 4.6935E+01 1.1729E+01 16 8.5933E+00 -2.8816E+00 5.9618E+01 -3.2481E+01 17 -2.4326E+01 -5.1990E+00 8.5708E+01 3.7958E+01 18 -1.6850E+01 2.5234E+00 1.9620E+02 -1.0736E+02 19 1.9198E+00 -2.9184E+00 1.0107E+02 6.8148E+01 20 1.2130E+01 3.9369E+00 -4.0311E+00 -1.6631E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -9.3500E+02 2.9403E+01 I/2PP 1.9911E+02 1.8969E+01 Nth COSINE SINE COSINE SINE 01 1.1442E+01 -1.7797E+01 -9.4575E-01 5.6540E+00 02 -1.8348E+01 -8.1652E+00 2.1163E-01 4.9699E+00 03 -2.7501E+01 1.1017E+01 2.1402E-01 -1.4091E+00 04 -3.7965E+01 3.7097E+01 -2.5258E+00 9.7998E+00 05 4.1757E+00 -3.0602E+00 -6.7838E-01 -6.1144E-01 06 -2.1831E+00 6.7318E+00 1.6204E-01 -1.3767E+00 07 4.6100E+00 -1.6284E+00 -1.7702E-01 -6.0815E-01 08 1.6999E+01 -5.3040E+01 8.5056E-01 2.2283E+00 09 1.2692E+00 4.2418E+00 -1.1979E-01 -1.9240E-01 10 -5.7270E+00 3.8989E-01 2.9069E-01 -3.5620E-01 11 -2.4849E+00 5.2581E+00 9.6075E-01 -4.3765E-01 12 -2.6213E+01 5.3793E+01 -6.9776E-01 -2.0420E+00 13 3.2029E+00 9.3185E-02 1.7103E-01 -4.6856E-02 14 3.3703E-01 8.9701E-01 -5.6788E-01 3.6929E-01 15 1.4870E+00 4.3893E-01 -1.2611E-01 4.0388E-01 16 8.7473E+00 -4.0394E+00 1.7437E+00 2.3693E-01 17 -3.0838E+00 -2.0485E+00 -5.2732E-02 -2.4082E-03 18 9.6437E-01 1.4768E+00 6.5339E-02 -1.4161E-01 19 4.4113E-01 -6.3089E-01 6.0632E-02 3.1416E-01 20 3.1776E+00 -6.5107E+00 1.0513E-01 4.8913E-01 Spider Arm Load, Lateral Cyclic Load, ib ib -2.9149E+01 MEAN -I.1760E+02 1.1179E+02 I/2PP 4.6253E+01 COSINE SINE Nth COSINE SINE 6.8162E+01 6.6103E+01 01 -5.5555E+00 3.2593E+00 02 4.7716E+00 -1.8268E-01 -4.5768E-02 1.0781E+01 03 7.9730E-01 -3.4014E-01 8.6157E+00 1.1957E+01 -3.7795E+00 4.5341E+00 04 -1.0118E+01 -2.6405E+01 2.5686E+00 1.8629E+00 05 9.3788E-01 1.2913E+00 1.0703E+01 2.3461E+00 06 -8.0635E-02 5.7373E-01 4.6878E-01 -4.4329E+00 07 1.3479E-01 9.7883E-01 08 -1.4445E+00 2.2397E+00 1.7165E+00 -6.0120E+00 -6.2661E-01 -4.8645E-01 09 -3.8026E-02 -8.1216E-02 4.1990E-01 4.9524E+00 10 -1.1226E-01 5.1497E-01 1.9000E+00 6.7219E+00 11 -1.1035E+00 -1.4919E-01 1.5388E+00 2.0385E+00 12 3.8608E+00 -7.1582E+00 2.6838E+00 2.7490E+00 13 -1.8720E-01 -2.7205E-02 14 7.2438E-01 -9.1560E-01 5.5752E+00 1.4608E+00 15 -6.5466E-03 -4.9936E-01 -4.5517E-04 3.8912E-01 16 -3.2252E+00 -2.0471E+00 -1.5307E+00 -1.2042E+00 1.4898E+00 1.5327E-01 17 2.0956E-01 6.7166E-01 -2.6146E-01 -5.0485E-01 18 -2.3441E-01 1.8959E-02 -3.7927E-01 -3.2446E-01 19 -1.4889E-01 -3.2505E-01 -7.1032E-01 2.4147E-01 20 2.0183E-01 -4.8333E-01 Blade Feathering Lag Damper Load, ib Angle, deg 4.8257E+02 MEAN 1.2733E+01 1.2728E+03 I/2PP 3.3540E+00 SINE Nth COSINE SINE COSINE 1.1236E+03 01 1.2890E+00 -3.1703E+00 -4.9244E+02 1.2604E+01 02 1.7380E-01 3.3566E-01 9.3162E+01 -1.1169E+02 03 2.9834E-01 -5.6252E-02 -3.1158E+01 -4.6933E+01 04 -6.7120E-02 5.9463E-02 -1.2575E+01 9.0839E+00 05 1.5207E-01 1.0506E-01 8.7314E+01 -4.3814E+00 06 -8.1529E-03 -2.5675E-02 7.1587E+00 1.0823E+01 07 -9.4294E-03 -1.8850E-02 -1.8344E+01 4.1422E+00 08 1.6492E-02 -3.0728E-02 -2.9640E+01 -5.8973E+00 09 6.1488E-03 1.4406E-02 1.7784E+00 -1.9683E+01 10 -2.5723E-02 -1.2694E-02 2.7574E+01 -4.3931E+00 11 -2.8747E-02 4.8911E-02 1.4701E+01 8.9501E+00 12 2.1410E-02 2.9121E-02 1.4554E+01 -2.9669E+00 13 -1.3859E-03 2.1188E-03 1.9336E+00 -6.0872E+00 14 2.1603E-03 2.7143E-03 -1.4670E+00 -5.8481E-01 15 5.4352E-03 -1.4254E-02 3.9190E+00 6.0718E+00 16 -1.2581E-03 2.9835E-03 8.6501E+00 -3.4129E+00 17 1.1634E-03 -3.5357E-03 -1.0908E+00 -9.4634E+00 18 -1.3063E-02 5.0698E-03 8.0555E+00 19 -1.7927E-03 2.0393E-03 1.0112E+01 5.0674E+00 7.5070E-01 20 -4.5351E-03 6.0275E-04 -5.2524E-01 MR Shaft Torque, in-lb MEAN 1.2276E+05 1/2PP 8.8857E+03 Nth COSINE SINE 01 1.1515E+03 1.6985E+03 02 6.3577E+02 3.1714E+03 03 -1.7620E+02 4.8925E+02 04 -1.7438E+03 4.8131E+03 05 7.1693E+01 -8.4978E+01 06 -7.2762E+02 5.2852E+02 07 4.1450E+01 9.6305E+00 08 3.9628E+02 6.2514E+01 09 -1.6879E+01 -4.6225E+01 10 -I.1679E+02 1.7034E+02 11 3.5278E+01 -3.5703E+00 12 -2.5669E+02 5.7158E+02 13 1.8726E+01 -2.8787E+01 14 3.6679E+01 9.5109E+01 15 2.1176E+01 -1.6576E+01 16 2.6843E+01 5.1624E+01 17 1.5654E+01 -3.3949E+01 18 5.4686E+00 1.6141E+02 19 -4.6480E+00 -1.9057E+01 20 -1.4295E+01 1.9078E+01 Flight 487, Condition C Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 2.2848E+04 -7.3840E+03 1/2PP 9.8409E+03 2.2578E+04 Nth COSINE SINE COSINE SINE 01 -4.5515E+03 -6.4434E+00 -1.4730E+04 1.2678E+04 02 -2.9081E+03 8.0523E+02 1.5760E+03 1.1177E+03 03 2.0338E+03 -3.6805E+03 2.3507E+03 -8.4717E+02 04 5.7713E+02 9.0794E+01 6.1607E+01 7.4805E+02 05 3.1206E+02 2.1393E+02 1.8662E+03 5.8349E+02 06 4.4873E+02 -1.6342E+02 5.2684E+02 -2.7394E+02 07 2.5548E+02 -3.6057E+02 -3.5619E+01 -2.1050E+02 08 1.0734E+03 -1.8392E+02 1.7578E+01 1.2683E+02 09 4.1838E+01 -1.3859E+02 -3.1556E+02 2.5432E+02 10 -6.0013E+01 -6.0992E+01 -9.3853E+02 -9.7534E+02 11 -7.7845E+01 -1.0775E+02 -3.2940E+02 -5.0361E+01 12 -8.8207E+01 1.4456E+02 -1.6914E+01 -4.6834E+01 13 -2.7100E+02 7.8724E+01 -7.6958E+01 6.8995E+01 14 -3.2800E+01 -2.6405E+01 -1.2824E+01 1.8492E+01 15 6.4509E+01 -8.4070E+00 6.3800E+00 -3.5050E+01 16 7.4748E+01 1.8547E+01 -5.6723E+01 -1.1051E+01 17 -2.9306E+01 -1.9281E+01 2.6119E+01 1.6905E+01 18 5.6533E+01 -1.0325E+01 4.7883E+01 2.6474E+00 19 -2.2391E-01 1.8918E+01 -1.7050E+01 4.9068E+01 20 -2.4446E+01 1.9142E+01 2.3001E+01 -1.5775E+01 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb -6.5933E+02 MEAN 1.8118E+04 9.3497E+03 I/2PP 2.7827E+03 Nth COSINE SINE COSINE SINE 01 -1.4841E+03 -2.6512E+02 -8.3004E+03 3.7756E+03 02 -1.0042E+03 7.8886E+02 5.8236E+02 6.0019E+02 03 2.7154E+02 -4.8495E+02 1.0271E+03 -5.4800E+02 04 4.2247E+01 1.2458E+01 1.0858E+02 -1.6878E+02 05 -9.6672E+01 -3.6754E+01 3.3187E+02 3.1270E+02 06 -1.8797E+02 7.0244E+01 1.3268E+02 -5.3406E-01 07 -1.4750E+02 1.7703E+02 -3.8282E+01 -1.0247E+02 08 -5.7516E+02 1.0075E+02 -1.2139E+02 -1.8677E+01 09 -7.4828E+01 3.8800E+01 -3.1195E+01 3.1905E+01 10 6.1515E+01 3.1923E+01 -1.1467E+02 -9.7216E+01 11 8.1649E+01 8.3922E+01 -7.2291E+01 1.1484E+01 12 7.6778E+01 -1.2627E+02 2.3594E+01 -1.6972E+01 13 2.1730E+02 -4.1967E+01 1.1263E+01 3.8836E+01 14 2.0485E+01 2.2593E+01 -1.6397E+01 -2.2588E+00 15 -7.0240E+01 1.1119E+01 -8.5165E+00 -4.6828E+00 16 -7.0022E+01 -7.1553E+00 -1.3737E+01 -1.2836E+01 17 3.0034E+01 2.3446E+01 4.2773E+00 6.4137E+00 18 -6.8468E+01 2.8108E+01 -1.3418E+01 6.1706E+00 19 -4.1571E+00 -2.6142E+01 2.0657E+00 -5.2639E+00 20 2.6570E+01 -2.8207E+01 7.0677E+00 -6.5096E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb -1.5812E+03 MEAN 1.6763E+04 8.2452E+03 I/2PP 3.1496E+03 COSINE SINE Nth COSINE SINE -5.9730E+03 4.3157E+03 01 -1.6001E+03 -1.5498E+02 7.9351E+02 2.4500E+02 02 -6.1643E+02 4.7333E+02 9.7929E+01 -4.9968E+02 03 -1.7870E+02 3.5262E+02 -5.5598E+01 -8.2844E+02 04 -1.4300E+02 -1.3657E+02 -1.1596E+02 -4.0954E+01 05 -2.1790E+02 -1.3862E+02 1.2974E+01 -4.6796E+00 06 -3.9638E+02 1.4779E+02 9.1344E+01 -3.9389E+01 07 -2.0250E+02 2.5509E+02 4.1976E+01 6.6705E+01 08 -7.8651E+02 1.6840E+02 9.2867E+01 -1.3712E+02 09 -6.5937E+01 8.7866E+01 3.3625E+02 3.0705E+02 10 8.5601E+01 6.9355E+01 1.1360E+02 1.0175E+01 11 1.0268E+02 6.8215E+01 3.6328E+00 -7.3700E+00 12 4.3527E+01 -9.9516E+01 2.4364E+01 -1.9478E+01 13 1.7404E+02 -6.8685E+01 1.0157E+01 8.9103E+00 14 1.6966E+00 1.3601E+01 1.2432E+00 1.2750E+01 15 -3.4528E+01 1.2128E+01 4.7757E+00 1.0309E+00 16 -2.5755E+01 -1.3538E+00 -9.4987E+00 -7.1553E+00 17 1.4950E+01 -1.1681E+00 -1.6374E+01 -4.1042E+00 18 -1.2610E+01 4.7423E+00 2.0355E+00 -1.8934E+01 19 -3.2587E+00 -3.0346E+00 -5.3771E+00 1.0301E-01 20 -2.9204E+00 -3.4849E+00 Flat.Bending @31%R, Edg.Bending @31%R,

in-lb in-lb

MEAN 1.1705E+04 -6.0818E+03

I/2PP 2.8088E+03 9.5088E+03

Nth COSINE SINE COSINE SINE 01 -5.5958E+02 -9.0916E+02 -5.5224E+03 5.7514E+03 02 -7.0168E+02 2.3791E+02 1.1237E+03 1.8744E+02 03 -5.6416E+02 7.3617E+02 -8.6530E+02 -5.7392E+02 04 -2.7041E+02 -2.9410E+02 -1.1721E+02 -1.4443E+03 05 -1.9427E+02 -2.2345E+02 -7.3590E+02 -5.2290E+02 06 -3.3730E+02 1.4961E+02 -2.2347E+02 3.3199E+01 07 -4.4378E+01 1.1829E+02 1.2328E+02 1.3907E+02 08 -1.9604E+02 1.4451E+02 9.4424E+01 1.1390E+02 09 2.6564E+01 3.0335E+01 1.5206E+02 -2.0435E+02 10 2.0000E+01 2.1646E+01 4.6365E+02 4.3664E+02 11 7.5972E+00 -5.5485E+01 2.1473E+02 2.6439E+01 12 -4.8396E+01 6.4408E+01 -1.9740E+01 4.5782E+00 13 -1.1896E+02 -1.1165E+01 4.4246E+01 -8.3366E+01 14 -1.2738E+01 -1.B153E+01 3.0474E+01 -3.9251E-01 15 6.1355E+01 3.3569E+00 -1.1171E+01 1.4402E+01 16 5.0732E+01 2.1361E+01 1.6803E+01 1.2239E+01 17 -3.5117E+01 -2.1407E+01 2.5278E+00 -8.3955E-01 18 5.5698E+01 -2.7879E+01 4.8621E+00 6.3157E+00 19 4.6736E+00 2.1881E+01 -3.2108E+00 1.2723E+01 20 -2.4843E+01 2.1488E+01 -5.5539E+00 4.0390E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 4.7807E+03 -3.7981E+03 I/2PP 3.5954E+03 7.9605E+03 Nth COSINE SINE COSINE SINE 01 4.9241E+02 -2.1386E+03 -3.7894E+03 3.4099E+03 02 -1.2407E+03 -1.2124E+01 1.0437E+03 7.6335E+01 03 -6.8663E+02 7.9684E+02 -1.5785E+03 -3.9804E+02 04 -2.2583E+02 -1.2699E+02 -1.2909E+02 -1.4239E+03 05 -9.1528E+01 -8.3429E+01 -1.3559E+03 -8.1576E+02 06 1.1822E+02 -2.6433E+01 -3.4683E+02 6.9321E+01 07 1.4525E+02 -9.9940E+01 -5.2661E+01 2.7430E+02 08 5.3363E+02 -1.5234E+02 1.1483E+02 -1.4207E+02 09 9.0282E+01 -9.7021E+01 5.6170E+00 -1.6446E+01 10 -4.2568E+01 -3.8135E+01 -1.1963E+02 -1.4500E+02 11 -8.5623E+01 -1.2069E+00 -3.5117E+01 -1.3036E+01 12 -9.3984E+00 3.4466E+01 -2.6485E+01 4.1717E+01 13 -2.6737E+01 5.0195E+01 4.6821E+00 -5.1073E+01 14 8.5381E+00 6.4386E+00 9.9105E+00 -2.8676E+01 15 -2.8399E+01 -2.3204E+00 -3.0047E+01 -1.6064E+01 16 -3.3871E+01 -1.8396E+01 3.8294E+00 6.8630E+00 17 2.7970E+01 1.0974E+01 2.8182E+01 2.9666E+01 18 -3.0701E+01 2.5141E+01 2.0942E+01 2.0310E+01 19 -7.0830E+00 -9.2336E+00 -5.3470E+00 3.9312E+01 1.5346E+01 -6.0717E+00 20 1.2165E+01 -2.1108E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb -6.6013E+03 MEAN -2.2119E+02 6.2841E+03 I/2PP 3.7446E+03 COSINE SINE Nth COSINE SINE -2.3659E+03 1.4995E+03 01 7.9469E+02 -1.8351E+03 8.3048E+02 -9.2934E+00 02 -2.0096E+03 -1.6209E+02 -1.4727E+03 -3.3369E+02 03 -7.4962E+02 1.0192E+03 -2.4157E+02 -9.7528E+02 04 3.9422E+01 1.8281E+02 -1.2082E+03 -6.0404E+02 05 7.0566E+01 1.7593E+02 -2.3238E+02 4.4431E+00 06 1.7653E+02 3.3894E+00 -1.7999E+02 2.5997E+02 07 6.2481E+01 -7.6134E+01 -7.7541E+01 -2.3830E+02 08 2.4541E+01 -4.4725E+01 -1.6485E+02 2.0625E+02 09 -1.1232E+02 1.2938E+01 -5.0734E+02 -4.9276E+02 10 9.7073E+00 -7.1028E+00 -1.7509E+02 -8.8032E+00 11 8.0794E+01 3.8738E+01 2.4054E+01 -1.5560E+01 12 5.6581E+01 -7.3010E+01 1.0696E+01 3.9173E+01 13 1.1379E+02 -4.5089E+01 -2.0230E+01 -9.5310E+00 14 4.5907E-01 -1.6291E+01 5.9624E-01 7.9110E-01 15 4.6219E+00 7.4658E+00 16 1.8558E+00 1.9884E+01 -1.5249E+01 2.1847E-01 17 -1.6884E+01 -8.3920E+00 -6.5533E+00 1.8717E+00 18 2.0859E+01 -1.7434E+01 -7.0164E+00 -9.6748E+00 -5.0135E-01 -1.0963E+01 19 3.5490E+00 4.8518E+00 -4.4752E+00 -3.3865E-01 20 -1.0348E+01 1.0695E+01 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.0334E+03 -6.2563E+03 3.2324E+03 I/2PP 4.2300E+03 Nth COSINE SINE COSINE SINE 01 2.4512E+02 -4.9274E+02 -8.6297E+02 -6.8230E+01 02 -1.9329E+03 7.8985E+01 1.7099E+02 -2.3677E+01 03 -9.8740E+02 7.6390E+02 -7.5608E+02 -1.3621E+02 04 3.0170E+02 4.8779E+02 -9.1761E+01 -4.7421E+02 05 3.6211E+02 1.6296E+02 -5.4314E+02 -2.5340E+02 06 -1.8868E+01 -1.2096E+02 -4.4188E+01 -1.4842E+01 07 -2.5417E+02 1.0640E+02 -2.1012E+02 9.3948E+01 08 -4.4592E+02 1.7752E+02 -2.8413E+02 -1.3026E+02 09 6.2506E+01 5.7337E+01 -1.5082E+02 2.5047E+02 10 3.6204E+01 1.7115E+01 -3.2809E+02 -3.9671E+02 11 -4.3585E+01 -4.5408E+00 -1.4346E+02 -4.5234E+01 12 -4.2109E+01 6.2751E+01 -5.2728E+00 -1.2116E+01 13 -7.7423E+01 1.1038E+01 -5.2214E+01 7.6178E+01 14 1.2778E+00 9.1057E+00 -2.9768E+01 2.2185E+01 15 2.8007E+00 1.7672E+01 3.3214E+01 1.1397E+01 16 1.8774E+00 -9.6902E+00 -1.0493E+01 -1.5255E+01 17 7.4767E+00 -1.5006E+01 -2.5134E+01 -2.0098E+01 18 -7.2744E+00 7.7806E+00 -2.7078E+01 -2.4225E+01 19 -9.1857E-01 1.1404E+01 1.2317E+01 -4.1291E+01 20 7.6885E-01 -3.9907E+00 -7.8002E+00 1.3909E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -1.0360E+03 2.5252E+01 I/2PP 3.1456E+02 4.1208E+01 Nth COSINE SINE COSINE SINE 01 7.6746E+00 -1.9972E+01 -5.0925E-01 4.6145E+00 02 -2.3388E+01 -3.6010E+00 1.5016E+00 4.8605E+00 03 -3.1028E+01 2.0993E+01 8.4522E-01 -8.6678E-01 04 -1.2911E+02 1.5951E+02 2.8421E+01 -6.7715E+00 05 -1.8707E+01 -4.6249E+00 4.4954E-01 -3.4538E-01 06 1.6628E-02 1.6800E+01 -3.4613E-02 -3.0109E+00 07 6.1335E+00 -2.1249E-01 -7.5305E-01 -3.6323E-01 08 2.0346E+01 -1.0037E+02 4.7723E+00 2.9485E+00 09 8.7065E-01 -2.5446E+00 2.5713E-01 2.7506E-01 10 -2.9738E+00 -4.1790E+00 1.1295E+00 2.3763E-01 11 -3.8934E+00 2.4850E+00 8.9253E-01 -4.1020E-01 6.6902E-01 6.1769E+00 12 2.9963E+01 -8.6115E+00 13 -1.3767E-01 -6.8030E-01 -1.5085E-01 2.7702E-01 14 1.4575E+00 2.2601E+00 -2.3903E-01 1.4868E-01 15 7.9021E-01 -3.4254E-01 -1.6836E-01 -1.2418E-02 16 8.7804E+00 -4.9793E+00 -5.0449E-01 4.6758E-01 17 -6.4079E-01 5.2448E-01 -1.2653E-01 5.0971E-03 18 -2.0752E-01 -3.2100E-01 1.5631E-01 2.5245E-03 19 1.4867E+00 -3.9648E-01 9.7928E-02 8.1090E-02 20 -1.1197E+00 -3.2425E+00 4.2178E-01 -8.3297E-01 Lateral Cyclic Load, Spider Arm Load, Ib ib MEAN -1.4562E+02 -3.8198E+01 1/2PP 6.5258E+01 1.6302E+02 Nth COSINE SINE COSINE SINE 01 -5.4306E+00 1.8033E+00 1.0098E+02 5.9493E+01 02 3.0127E+00 -2.1610E+00 8.3841E+00 1.6738E+01 03 9.3819E-01 -9.0709E-01 6.4702E-01 1.4939E+00 04 -4.2088E+01 -1.2530E+01 -9.9506E+00 1.6237E+01 05 2.2857E+00 1.1178E+00 1.6346E+01 2.3915E+01 06 1.0605E+00 2.1372E+00 3.8102E+01 -2.2190E+01 07 -1.7411E-01 -2.4433E-03 -8.9910E-01 -6.9241E+00 08 -6.9246E+00 7.3531E+00 3.8830E+00 -1.2613E+01 09 -8.2464E-01 2.9875E-01 -8.4750E-01 7.1953E-01 10 -1.2530E+00 -4.3398E-02 1.4002E+00 4.7437E+00 11 -7.1568E-01 2.7891E-01 6.8105E-01 4.4414E+00 12 -9.6800E-01 -1.1861E+01 4.0319E+00 -1.0007E+00 13 1.1017E-01 -3.9562E-01 -1.1834E+00 7.7482E+00 14 1.4786E-01 -3.2787E-01 4.9314E+00 -2.5106E-01 15 5.2549E-02 -8.1434E-02 1.5816E+00 -1.0592E+00 16 -4.1524E-01 5.0982E-02 -8.7698E-01 -9.6664E-01 17 1.5591E-01 8.4181E-02 -9.7765E-01 -8.6348E-02 18 -4.4141E-01 -8.8693E-02 1.8615E+00 -1.3850E+00 19 -1.2876E-01 -1.2646E-01 4.5934E-02 2.2530E-01 20 -8.7510E-01 2.1508E+00 5.4840E-02 1.9536E-01 9O Blade Feathering Lag Damper Load, ib Angle, deg 1.3575E+01 4.7714E+02 4.1951E+00 1.2930E+03 Nth COSINE SINE COSINE SINE 01 8. 9509E-01 -4.1183E+00 -2.1588E+02 1.2431E+03 8470E-01 3.3266E-01 1.1607E+02 -2.0181E+01 02 2.

03 2. 3180E-01 -2.2063E-01 -6.4719E+01 -3.1971E+01 04 -6. 5568E-02 1.1092E-01 -3.7513E+01 -4.3904E+01 4921E-01 1.3946E-01 8.7321E+01 -5.3790E+01 05 2.

7458E-02 -2.8362E-02 1.7064E+00 -2.8721E+01 06 5.

07 -4. 3364E-03 -4.5708E-02 2.0714E+01 2.2503E+00 8905E-02 -1.0337E-02 9.8487E+00 6.1116E+01 08 -2.

6657E-03 6.2692E-03 -9.6746E+00 -3.2179E+00 09 -8.

10 -5. 8427E-02 -6.7959E-02 9.7214E+00 4.3947E+00 11 8. 5418E-03 1.3975E-02 1.9279E+01 -3.8620E-01 12 2. 0247E-02 -9.1891E-03 -1.7902E+00 -1.4592E+01 13 -7. 6143E-04 3.8916E-02 1.0550E+01 -7.8199E+00 14 -3. 2218E-03 1.5747E-04 5.4969E+00 8.6860E+00 15 -5. 1924E-03 -6.1576E-03 3.1012E-01 1.8361E+00 16 -2. 1123E-02 -1.7205E-02 -9.7913E+00 1.4771E+00 17 6. 2872E-03 1.4981E-03 9.9152E-01 -1.2851E+00 18 9. 9037E-03 -8.3796E-03 6.9023E-01 -2.9972E+00 19 -3. 9617E-03 9.3791E-03 -2.3934E+00 -9.3266E-01 20 1. 1472E-02 -3.2617E-04 2.1037E+00 -3.1563E+00 MR Shaft Torque, in-lb MEAN 1.3190E+05 I/2PP 1.2200E+04 Nth COSINE SINE 01 4.4203E+02 1.0601E+03 02 1.2314E+03 3.1110E+03 03 -2.9113E+01 4.2182E+02 04 4.8684E+02 8.6447E+03 05 -1.9794E+02 -3.1049E+02 06 6.5026E+01 1.5223E+03 07 -1.2360E+01 1.9779E+02 08 4.0343E+02 -7.3520E+02 09 2.5334E+00 -1.2075E+01 10 2.7755E+02 3.1812E+02 11 -1.8155E+01 -1.1216E+01 12 1.3275E+02 4.6307E+02 13 -4.7034E+00 -5.9302E+01 14 5.1248E+01 -1.6146E+02 15 6.9764E+00 1.8852E+01 16 1.2337E+02 -7.5361E+00 17 -3.4462E+00 1.0753E+01 18 -8.3214E+01 -2.3202E+01 19 -5.7911E+00 1.4164E+01 20 -2.7710E+01 5.8671E+01 9] Flight 497, Condition E Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 2.2284E+04 -3.2332E+03 2.3149E+04 I/2PP 1.3983E+04 Nth COSINE SINE COSINE SINE 01 -5.9536E+03 8.8491E+02 -1.5567E+04 1.4934E+04 02 -5.9455E+03 -1.1070E+03 1.7470E+03 1.5310E+03 03 2.6289E+03 -4.3993E+03 2.7154E+03 -7.7528E+02 04 4.7800E+02 1.3356E+03 -1.3502E+02 5.6220E+02 05 -1.4167E+03 9.2395E+02 -3.9116E+02 1.1639E+03 06 1.0864E+02 2.1113E+02 3.6015E+02 6.0219E+02 3.6111E+02 -1.9641E+02 07 3.4331E+02 7.1507E+02 08 1.7577E+02 5.0053E+02 -3.3520E+01 -6.2382E+01 09 2.3990E+02 2.1910E+02 -3.4656E+02 -1.0899E+02 1.5139E+03 -1.4061E+02 10 -1.8768E+01 1.3053E+02 11 6.3477E+01 -1.7580E+01 9.2786E+01 -2.4865E+02 12 2.9565E+02 -3.2619E+02 -1.1415E+02 7.0937E+01 13 1.0604E+02 -2.5172E+01 -2.6609E+01 -1.1305E+02 14 -5.4114E+00 -4.6933E+01 6.1853E+00 -8.7384E+00 15 -3.8283E+01 -1.1488E+01 6.2727E+00 -2.2302E+01 16 -4.1338E+01 6.9203E+01 2.0099E+01 2.7814E+01 17 -1.4348E+02 5.5709E+01 8.2144E+01 2.8909E+01 18 -2.2373E+01 -5.5321E-02 3.5825E+01 9.4914E+01 19 2.0019E+01 1.6528E+00 1.3608E+01 2.6818E+01 20 1.9933E+01 3.1535E+01 -9.3485E+00 -6.5570E+00 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.7567E+04 1.4239E+03 I/2PP 3.5228E+03 1.0470E+04 Nth COSINE SINE COSINE SINE 01 -1.9484E+03 2.4642E+01 -9.2975E+03 5.0924E+03 02 -1.8093E+03 4.2375E+02 4.2589E+02 7.7403E+02 03 4.0427E+02 -5.9401E+02 1.2448E+03 -7.6159E+02 04 5.4997E+01 -6.2626E+01 9.1623E+01 -2.5433E+02 05 3.7710E+02 -1.2991E+02 -1.3347E+02 4.2773E+02 06 -9.9087E+01 -1.1624E+02 8.5866E+01 2.7975E+02 07 -7.7027E+01 -4.1023E+02 5.0668E+01 -1.2347E+01 08 -1.2138E+02 -2.8047E+02 -1.4341E+01 -6.7212E+01 09 -I.0807E+02 -1.7266E+02 -7.6085E+01 -2.9919E+01 10 -1.0832E+01 -6.3190E+01 2.3557E+02 -8.0940E+01 11 -4.9095E+01 5.7889E+01 -1.3719E+01 -1.5266E+01 12 -2.3669E+02 2.5574E+02 -5.1128E+01 5.7037E+01 13 -7.8478E+01 2.4055E+01 -3.3711E+00 -3.3918E+01 14 1.8638E+01 2.9984E+01 8.2989E+00 -4.1634E+00 15 3.8144E+01 -4.8109E+00 -1.1498E+01 1.1923E+01 16 4.1056E+01 -6.2475E+01 5.0192E+00 -9.9834E+00 17 1.5932E+02 -7.5879E+01 1.0707E+01 -8.5516E+00 18 2.7973E+01 3.2936E+00 5.4124E+00 6.0585E+00 19 -2.3859E+01 -1.5809E+01 -6.7625E+00 1.4416E+00 20 -2.3711E+01 -1.8560E+01 -9.5756E+00 -2.8616E+00 Edg.Bending @19.54%R, Flat.Bending @19.54%R, in-lb in-lb -1.2508E+02 MEAN 1.6679E+04 9.6288E+03 1/2PP 3.5566E+03 COSINE SINE Nth COSINE SINE -6.5034E+03 5.2945E+03 01 -1.7686E+03 9.9147E+01 9.0865E+02 4.0782E+02 02 -9.5712E+02 3.8707E+02 2.2783E+01 -6.1518E+02 03 -1.5791E+02 3.8545E+02 -3.4358E+01 -6.9003E+02 04 -5.9202E+01 -4.8677E+02 -8.1952E+01 4.7174E+00 05 8.1069E+02 -4.6360E+02 06 -1.9488E+02 -2.3320E+02 -1.6286E+01 4.9545E+01 4.8276E+01 2.1197E+02 07 -1.7294E+02 -5.8822E+02 3.1422E+01 -3.2885E+01 08 -1.4531E+02 -3.8836E+02 1.7458E+02 4.0478E+01 09 -1.2856E+02 -2.3611E+02 10 -8.8210E+01 -6.7175E+01 -5.2302E+02 9.5969E+01 11 -2.6558E+01 8.8907E+01 -5.8095E+00 7.9183E+01 12 -1.6671E+02 2.2888E+02 -5.0657E+00 -1.0093E+01 -1.9421E+00 2.4810E+01 13 -4.7418E+01 2.3912E+01 -9.3810E+00 -1.9730E+00 14 1.1041E+01 3.5259E+00 15 1.8667E+01 3.2556E+00 -4.8335E+00 6.9542E+00 16 6.0318E+00 -2.2102E+01 -9.1258E+00 -6.3862E+00 17 1.6602E+01 -3.6818E+01 -3.8358E+01 -4.4768E+00 18 1.3245E+00 1.9208E+00 -2.0577E+01 -3.3845E+01 -2.1364E+00 -7.8039E+00 19 -8.1134E+00 -5.8521E+00 5.5363E+00 -2.8042E+00 20 -2.3331E+00 8.7099E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.1901E+04 -5.1153E+03 1.0645E+04 I/2PP 3.1620E+03 Nth COSINE SINE COSINE SINE 01 -1.7865E+02 -8.8939E+02 -5.9625E+03 6.8127E+03 1.3726E+03 2.8822E+02 02 -6.9962E+02 3.3426E+02 03 -5.6605E+02 7.6901E+02 -1.2411E+03 -7.0256E+02 04 -1.9065E+02 -6.7300E+02 -6.4959E+01 -1.0471E+03 1.1406E+02 -6.0958E+02 05 7.7265E+02 -6.6972E+02 -1.5941E+02 -2.8661E+02 06 -2.0148E+02 -2.1934E+02 07 -1.4559E+02 -2.4768E+02 -6.0790E+01 1.7804E+02 08 -7.2624E+01 -1.2381E+02 5.3533E+01 2.4123E+01 09 1.1370E+01 -2.2417E+01 2.6504E+02 6.4539E+01 10 -8.0762E+01 3.6112E+01 -8.1377E+02 1.5371E+02 11 4.7737E+01 9.8175E+00 3.9973E+00 1.1530E+02 12 1.5958E+02 -8.8000E+01 3.0835E+01 -6.0048E+01 13 5.0955E+01 -2.1549E-01 -2.5444E+01 8.1586E+01 14 -1.2610E+01 -2.4559E+01 -4.6919E+00 1.5437E+01 15 -2.7275E+01 1.0872E+01 3.5768E+01 -1.2958E+01 7.3620E+00 -3.1880E+00 16 -4.3867E+01 4.8161E+01 5.7965E+01 -3.0296E+00 17 -1.3559E+02 6.1288E+01 18 -2.3726E+01 -6.7259E+00 1.6130E+01 1.0612E+00 19 1.8325E+01 9.8119E+00 5.3417E+00 -6.4217E+00 20 1.8634E+01 1.2071E+01 5.7974E+00 -2.5560E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 4.8583E+03 -3.3403E+03 1/2PP 3.9847E+03 7.4646E+03 Nth COSINE SINE COSINE SINE 01 1.2119E+03 -2.2684E+03 -4.3484E+03 4.2041E+03 02 -1.3713E+03 4.8608E+01 1.3049E+03 2.1547E+02 03 -7.0408E+02 9.7187E+02 -2.0331E+03 -6.3492E+02 04 -4.6459E+01 -2.8942E+02 -1.8996E+01 -9.4217E+02 05 -1.0693E+00 -1.1870E+02 1.7716E+02 -1.1404E+03 06 -2.5702E+01 1.7060E+01 -2.0004E+02 -4.5276E+02 07 1.2153E+02 3.4789E+02 -2.4282E+02 -1.6621E+02 08 8.9795E+01 3.1001E+02 5.4103E+01 1.8339E+02 09 5.4867E+01 1.5293E+02 -7.6415E+00 4.3513E+01 10 9.0537E+01 7.2933E+00 1.9492E+02 -4.7038E+00 11 9.0121E+00 -6.0636E+01 4.1217E+01 -1.5115E+01 12 1.7680E+01 -1.3197E+02 6.0271E+01 -3.1322E+01 13 1.3026E+01 -2.1805E+01 -5.4088E+00 5.4992E+01 14 6.5101E+00 9.2514E+00 9.9023E+00 2.3783E+01 15 1.4281E+01 -1.0977E+01 4.7478E+01 -8.7299E+00 16 4.4354E+01 -3.1839E+01 3.5979E+01 -9.7408E+00 17 1.0868E+02 -2.8672E+01 1.6783E+02 1.7335E+01 18 1.8736E+01 9.5177E+00 4.7235E+01 8.1436E+01 19 -1.1981E+01 -5.1489E+00 -4.5308E+00 7.5177E+00 20 -1.1379E+01 -7.3543E+00 -1.5335E+01 -6.1571E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -2.3813E+02 -6.2217E+03 I/2PP 4.3786E+03 6.2920E+03 Nth COSINE SINE COSINE SINE 01 1.4970E+03 -2.0639E+03 -2.8209E+03 1.8436E+03 02 -2.3322E+03 -2.5614E+02 9.7008E+02 1.8113E+02 03 -7.5128E+02 8.8829E+02 -1.7262E+03 -4.3157E+02 04 -8.4478E+01 3.7319E+02 -9.0742E+01 -7.0228E+02 05 -3.8221E+02 2.7239E+02 -8.6495E+01 -9.4081E+02 06 5.3342E+01 1.8442E+02 -1.4271E+02 -3.1858E+02 07 -3.0088E+00 1.4426E+02 -2.6902E+02 -3.6095E+02 08 9.8388E+01 5.1007E+01 5.4092E+00 5.1869E+01 09 -1.2901E+01 -3.2018E+01 -2.7742E+02 -7.3016E+01 10 -2.2870E+01 -4.6446E+01 8.5172E+02 -1.7688E+02 11 -4.9101E+01 5.0892E+01 8.9661E+00 -8.9766E+01 12 -1.5292E+02 1.9779E+02 -3.5509E+01 9.2448E+01 13 -4.2827E+01 2.4425E+01 8.4854E+00 -4.6363E+01 14 -1.9275E+00 1.2483E+01 1.3546E+01 -1.4894E+01 15 3.9031E+00 4.5637E+00 -1.8670E+01 6.0801E+00 16 -1.6322E+01 4.7911E+00 -8.1278E+00 1.7936E+00 17 -6.3737E+01 1.5823E+00 -6.5407E+01 -4.5742E+00 18 -2.0273E+01 -9.5042E+00 -1.8951E+01 -1.8408E+01 19 6.1584E+00 5.1031E+00 -4.0888E+00 1.3271E+00 20 7.8964E+00 1.0333E+01 2.6314E+00 3.8970E+00 Edg.Bending @81%R, Flat. Bending @81%R, in-lb in-lb -6.0503E+03 MEAN -4.1078E+03 3.1957E+03 I/2PP 4.2212E+03 COSINE SINE Nth COSINE SINE -9.5668E+02 -4.9316E+01 01 2.6598E+02 -6.3375E+02 1.6588E+02 1.5887E+01 02 -2.3179E+03 -9.9893E+01 -8.1861E+02 -1.9729E+02 03 -9.2311E+02 3.9070E+02 -3.2221E+00 -2.9560E+02 04 -2.7667E+01 5.9420E+02 -1.3258E+02 -3.6883E+02 05 -3.0525E+02 5.5652E+02 -1.7937E+01 -9.2216E+01 06 1.7531E+02 -4.2948E+01 -9.7827E+01 -3.8804E+02 07 -6.0703E+01 -4.1066E+02 -5.5050E+01 -1.4707E+02 08 -1.7492E+02 -2.8830E+02 -2.9633E+02 -1.4758E+02 09 -7.2620E+01 -8.3751E+01 6.5634E+02 -5.3279E+01 10 -2.8629E+00 3.6609E+01 1.5456E+01 -5.3635E+01 11 4.2617E+01 -6.3214E+00 7.5384E+00 4.4041E+01 12 9.4073E+01 -1.3745E+02 2.8955E+01 -9.9499E+01 13 2.0506E+01 -2.5101E+01 -6.3309E+00 -3.5003E+01 14 2.5751E+00 -I.0244E+01 -6.4371E+01 1.9914E+01 15 -2.1238E+00 3.4553E+00 -2.6975E+01 1.6748E+01 16 6.0745E-01 6.0769E-01 -1.5801E+02 -1.7513E+01 17 2.4722E+01 -2.1838E+00 18 1.6418E+01 3.3671E+00 -4.0185E+01 -8.5480E+01 19 4.0923E+00 -2.8674E+00 1.0340E+00 -1.0273E+01 1.1605E+01 1.0757E+01 20 -4.9311E+00 -5.0640E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib 2.2831E+01 MEAN -1.3143E+03 5.9805E+01 I/2PP 5.1440E+02 COSINE SINE Nth COSINE SINE -5.5522E-01 9.0449E+00 01 7.3423E+00 -2.5402E+01 02 -3.4671E+01 -4.0931E+00 2.4981E+00 4.9487E+00 03 -2.8439E+01 1.9673E+01 3.6211E-01 -1.2114E+00 04 -3.5622E+02 1.0014E+02 4.0733E+01 1.1070E+01 05 3.4948E-01 -2.3420E+01 -1.6398E-01 5.9706E-01 06 -3.6784E+01 -2.0626E+00 5.7974E+00 -1.7702E+00 -6.1561E-01 -9.2246E-01 07 3.4979E+00 1.4727E+01 08 7.8554E+01 8.6218E+01 -9.7316E+00 1.0774E-01 09 2.3292E+00 -6.2307E+00 -4.6658E-01 2.3890E-01 -1.2799E+00 1.1122E+00 10 8.5022E+00 3.9397E-01 -1.8186E-01 1.3235E+00 11 -1.5798E+00 -7.0114E+00 2.6800E-02 9.6320E-02 12 -6.2057E+01 -8.7535E+01 5.1091E-01 1.2374E-01 13 -4.3107E+00 1.2993E+00 -4.0157E-02 -3.8448E-01 14 5.4957E-02 4.4587E-01 3.0640E-01 -9.9954E-02 15 4.5038E-02 4.5317E-01 -6.3862E-01 -3.7750E-03 16 -2.4668E+00 4.9113E+00 -1.1398E-01 4.0377E-02 17 4.1771E+00 -7.8319E-01 1.9075E-01 1.3379E-01 18 1.7944E+00 -1.4192E+00 -3.1675E-02 5.2570E-02 19 -3.2938E-01 2.7435E-01 -1.6240E-01 4.1379E-01 20 6.1045E+00 2.3040E+00 Lateral Cyclic Load, Spider Arm Load, ib ib -2.2502E+02 -5.6514E+01 7.1835E+01 2.4538E+02 Nth COSINE SINE COSINE SINE 01 -6.3910E+00 4.9361E+00 1.4810E+02 8.7812E+01 02 4.2678E+00 -3.7374E+00 2.1281E+01 2.3279E+01 03 4.0938E+00 -2.2022E+00 -2.6134E+01 7.0520E+00 04 -7.5408E+00 -3.3331E+01 -2.8669E+01 1.0982E+01 05 5.8264E-01 4.4165E+00 -1.6127E+01 4.3283E+01 06 -1.2833E+00 6.8718E+00 4.7476E+01 3.9642E+01 07 8.3396E-01 -1.3952E+00 7.2074E+00 1.2021E+01 08 2.8357E+00 -1.7501E+01 1.1154E+01 8.5783E+00 09 4.6510E-01 -6.5061E-01 2.5678E+00 1.4064E+00 10 1.3203E-01 -2.0841E+00 2.4252E+00 -3.6003E+00 11 3.9519E-01 -8.9869E-01 -6.8633E+00 -2.0716E+00 12 9.4837E+00 1.2970E+01 -9.8488E+00 1.0068E-02 13 -5.3675E-01 6.9361E-01 -1.6653E+00 -2.9001E+00 -1.5675E+00 7.4264E+00 14 4.5896E-01 8.4835E-01 15 1.5435E-01 -6.7076E-02 -1.2058E+00 -1.3447E+00 16 3.8798E+00 -1.1236E+00 1.3646E+00 -1.1461E+00 17 -4.8971E-01 -7.8099E-02 -1.0599E+00 9.9766E-01 18 -8.5365E-01 2.2500E-01 -2.1023E+00 1.0613E+00 19 7.6939E-02 -1.0407E-01 -2.4992E-01 1.0118E-01 20 8.0887E-01 -8.9122E-01 -9.1825E-01 -6.4849E-01 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.5036E+01 5.4415E+02 1/2PP 5.4335E+00 1.3043E+03 Nth COSINE SINE COSINE SINE 01 1.1786E+00 -5.3659E+00 -6.6941E+01 1.2994E+03 02 3.6260E-01 5.0695E-01 1.9678E+02 -1.8370E+01 03 1.4330E-01 -1.7841E-01 -9.6009E+01 1.8185E+01 04 -1.6708E-01 8.2599E-02 -3.5514E+01 -9.2161E+00 05 -7.5886E-02 1.9926E-01 1.8988E+01 -1.7869E+01 06 5.6610E-02 1.1612E-01 1.4039E+00 -3.0657E+01 07 4.5158E-02 -5.4164E-03 3.8265E+01 1.1749E+01 08 1.3795E-02 -2.9402E-03 -4.9315E+00 -2.1748E+01 09 -4.7526E-03 -3.1237E-02 1.5954E+01 -8.3286E+00 i0 1.1273E-01 1.8678E-02 -3.7646E+01 2.0720E+01 ii -6.3500E-03 -3.4126E-02 6.0289E+00 -2.3690E+00 12 -6.6678E-02 3.0499E-02 -1.7997E+01 1.4222E+01 13 -1.9158E-02 -1.3357E-02 -9.2045E+00 2.0689E+00 14 -8.4139E-03 4.8720E-03 -3.0310E+00 -4.8565E-01 15 2.8141E-04 -2.1923E-02 1.5469E+00 -4.6954E+00 16 6.5308E-03 4.4335E-03 -1.5047E-01 1.0402E+00 17 2.7966E-02 -6.3235E-03 -1.9357E+00 -2.0715E+00 18 5.3215E-04 1.6889E-02 -2.8591E+00 -1.8637E+00 19 2.6022E-05 3.1970E-03 1.1042E+00 1.7539E+00 20 -9.7812E-03 5.2067E-03 -2.8877E-01 -1.0177E+00 MR Shaft Torque, in-lb MEAN 1.5992E+05 1/2PP 1.3816E+04 Nth COSINE SINE 01 7.2422E+02 1.8933E+03 02 4.3640E+03 5.9011E+03 03 6.5272E+01 2.9921E+02 04 -5.4571E+02 6.6213E+03 05 2.2019E+02 -2.7466E+02 06 -9.0847E+02 1.8537E+03 07 -2.2211E+02 -4.6662E+01 08 1.7590E+02 8.7116E+02 09 4.9406E+01 -3.6194E+01 10 2.6813E+02 7.0383E+01 11 -5.8844E+01 -4.0973E+01 12 -2.9390E+02 -8.1556E+02 13 -3.8114E+01 -1.0204E+01 14 9.1474E+01 1.5866E+02 15 1.5246E+00 -3.3826E+01 16 -1.0682E+01 1.9922E+02 17 2.5915E+01 1.9413E+01 18 -1.5407E+02 -6.8275E+01 19 4.2756E+01 1.9675E-01 20 5.8610E+01 9.7125E+01 Flight 497, Condition F Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb 7.4597E+01 MEAN 2.1730E+04 2.7716E+04 1/2PP 1.8660E+04 COSINE SINE Nth COSINE SINE -1.5427E+04 1.7557E+04 01 -6.0594E+03 1.8669E+03 02 -8.1740E+03 -2.8003E+03 2.0172E+03 1.4891E+03 03 2.4869E+03 -6.6448E+03 3.1190E+03 -1.4554E+03 -8.2964E+01 1.6798E+02 04 8.1185E+02 2.4984E+03 -1.4957E+03 7.6637E+02 05 -2.4510E+03 7.4641E+02 5.6546E+01 1.0659E+03 06 2.1670E+02 2.0274E+02 2.8348E+02 -1.1497E+02 07 -4.9908E+02 4.1556E+02 -5.8585E+01 -1.6699E+02 08 -9.2608E+01 5.8198E+02 -2.0640E+02 -8.4474E+02 09 -1.3890E+02 2.4452E+02 1.1682E+03 7.2842E+02 10 5.2135E+01 -5.0447E+00 11 8.0996E+01 1.3547E+01 3.8221E+02 -4.0246E+01 12 3.1034E+02 5.3142E+01 -5.7817E+01 -4.4609E+00 1.3857E+02 -1.7981E+02 13 1.4210E+02 -1.3319E+01 -1.6277E+01 -5.1626E+01 14 2.1539E+00 -3.0142E+01 -7.6191E+00 -7.4534E+01 15 -4.2494E+01 -5.3408E+01 1.4315E+01 4.3089E+00 16 -8.7190E+00 -1.7281E+01 -1.2995E+01 1.4341E+01 17 -4.8611E+01 -4.2944E+01 18 -3.6314E+01 -1.5613E+00 -4.6416E+01 1.7537E+02 19 -1.9551E+01 -2.5163E+01 -7.1234E+00 -6.5595E+00 -2.2110E+01 1.2736E+01 20 2.7268E+01 1.0041E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.7111E+04 3.2962E+03 I/2PP 4.1384E+03 1.1835E+04 Nth COSINE SINE COSINE SINE 01 -1.8874E+03 2.8759E+02 -9.8284E+03 6.6283E+03 02 -2.3086E+03 1.1277E+02 4.9289E+02 7.6937E+02 03 3.9642E+02 -8.5319E+02 1.2038E+03 -1.1930E+03 04 1.4339E+02 -I.0156E+02 -3.5134E+01 -3.2595E+02 05 6.5015E+02 2.1711E-01 -2.9552E+02 3.5841E+02 06 -9.0072E+01 -2.4870E+02 6.5246E+01 3.1127E+02 07 3.2755E+02 -2.3932E+02 8.9005E+01 -1.6404E+00 08 1.9474E+01 -3.4585E+02 4.3348E+01 -6.8941E+01 09 1.9869E+01 -1.8961E+02 -4.5052E+01 -8.3974E+01 10 -5.0075E+01 1.0370E+01 1.7108E+02 9.0713E+01 11 -1.4228E+02 -4.0461E+01 3.8360E+01 -2.2383E+01 12 -2.5406E+02 -1.4330E+01 -5.7878E+01 -3.8069E+01 13 -1.0368E+02 1.3868E+01 2.5687E+01 -4.7096E+01 14 -1.0684E+01 5.3151E+01 1.5442E+01 -8.4525E+00 15 3.5576E+01 4.2681E+01 -2.4927E+00 -7.4126E-01 16 3.0208E+01 2.4955E+01 -8.8006E+00 -1.5793E+01 17 6.2736E+01 2.7135E+01 7.5047E+00 -1.5066E+00 18 4.8721E+01 6.9133E+00 8.3133E+00 -1.4652E+00 19 8.0972E+00 5.3992E+00 -4.1580E+00 8.9413E+00 20 -1.7653E+01 1.2704E+00 -1.5064E+01 -7.5595E-01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.6609E+04 1.1675E+03 1/2PP 4.6668E+03 9.7684E+03 Nth COSINE SINE COSINE SINE 01 -1.7535E+03 3.8667E+02 -6.6269E+03 6.3447E+03 02 -I.0871E+03 3.6131E+02 1.0119E+03 3.3156E+02 03 -1.7792E+02 6.5237E+02 -2.2355E+02 -8.0133E+02 04 -4.9650E+01 -7.3768E+02 -2.5154E+02 -4.1440E+02 05 1.5147E+03 -2.1974E+02 -6.3065E+01 3.2930E+01 06 -2.0018E+02 -5.0264E+02 1.4239E+01 6.0223E+01 07 4.3913E+02 -3.7421E+02 -I.0733E+02 1.4233E+02 08 2.7653E+01 -4.8431E+02 1.5729E+01 -2.6506E+01 09 9.8452E+01 -2.1243E+02 1.0725E+02 3.3246E+02 10 -9.1014E+01 -5.8792E+01 -4.0334E+02 -2.2913E+02 11 -1.0222E+02 3.5361E+00 -1.3505E+02 3.4552E+01 12 -1.9977E+02 -1.2258E+01 -8.1241E+00 -5.0209E+00 13 -8.4732E+01 6.2854E+00 -3.1990E+01 6.0939E+01 14 -2.3263E+01 2.4222E+01 -3.8333E+00 4.7099E+00 15 2.9267E+01 3.3628E+01 8.0342E+00 2.5586E+01 16 1.5881E+01 1.1444E-01 -3.2521E+00 -8.0162E+00 17 1.3445E+01 2.2906E+00 -6.1633E+00 -1.6967E+00 18 6.3851E+00 -1.2638E+01 7.9312E+00 -8.3795E+01 19 4.4279E+00 -2.9280E-02 7.0866E+00 6.5977E+00 20 -5.2464E-01 -2.1865E+00 1.2775E+01 -8.9750E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb -4.1324E+03 MEAN 1.1915E+04 1.0625E+04 I/2PP 3.7124E+03 COSINE SINE Nth COSINE SINE -5.7436E+03 7.7586E+03 01 1.0315E+01 -7.6338E+02 1.4371E+03 3.3400E+01 02 -6.2173E+02 5.4218E+02 -1.7312E+03 -7.1994E+02 03 -5.8164E+02 1.2721E+03 -3.3027E+02 -4.5857E+02 04 -1.6097E+02 -8.8966E+02 4.7972E+02 -4.0456E+02 05 1.4327E+03 -4.8214E+02 -6.5691E+01 -3.8076E+02 06 -2.0906E+02 -4.5102E+02 -1.7894E+02 1.1717E+02 07 1.3626E+02 -2.4376E+02 08 -6.3638E+01 -1.7779E+02 -3.0623E+00 3.2368E+01 1.7427E+02 4.4791E+02 09 8.4979E+01 -1.2727E+01 -6.0687E+02 -3.5589E+02 10 -5.2464E+01 -6.3299E+01 -2.0952E+02 6.8714E+01 ii 8.8997E+01 3.6152E+01 3.6191E+01 1.7701E+01 12 1.4172E+02 2.8412E+01 -9.4476E+01 1.1880E+02 13 5.4822E+01 3.5631E+00 -3.1476E+01 1.8668E+01 14 -5.0742E+00 -4.3987E+01 9.6946E+00 4.2222E+01 15 -1.6207E+01 -2.6245E+01 1.9172E+01 2.5124E+01 16 -2.7480E+01 -2.9371E+01 1.7026E+01 3.6668E+01 17 -4.2947E+01 -1.9572E+01 -4.8790E+00 3.8751E+01 18 -4.5902E+01 -2.5857E+00 19 5.2182E-01 -9.9608E-01 8.1105E+00 2.7639E+00 8.5211E+00 -1.0284E+01 20 9.9899E+00 -3.3453E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 4.8868E+03 -2.8828E+03 8.1500E+03 I/2PP 4.5090E+03 Nth COSINE SINE COSINE SINE 01 1.4531E+03 -2.2823E+03 -4.2340E+03 4.9251E+03 02 -1.3455E+03 2.7083E+02 1.3104E+03 -I.0391E+02 03 -5.4917E+02 1.3500E+03 -2.6390E+03 -3.8035E+02 04 -5.7259E+01 -4.0959E+02 -2.2135E+02 -3.1541E+02 05 1.5115E+02 -I.0800E+02 8.1815E+02 -7.6009E+02 06 -6.0697E+01 -8.5702E+00 -5.4558E+01 -6.4162E+02 07 -2.0248E+02 1.8256E+02 -1.5838E+02 -1.0883E+02 08 -1.7488E+01 3.7508E+02 4.1362E-01 2.5862E+02 09 -9.1556E+01 1.6830E+02 1.8991E+01 -8.0801E+01 1.4105E+02 1.0678E+02 i0 6.4183E+01 3.7872E+01 7.7508E+01 1.5829E+01 ii 4.3096E+01 1.5222E+00 12 3.1279E+01 -2.6609E+01 7.1352E+01 6.5621E+00 13 1.2456E+01 -1.6756E+01 -3.0003E+01 1.6373E+01 14 1.2228E+00 7.2445E+00 -2.3123E+01 9.1090E+00 15 -6.5045E+00 1.6351E+01 -4.7619E+00 1.2116E+01 2.0581E+01 3.2476E+01 16 1.6583E+00 2.9310E+00 4.8337E+01 6.5412E+01 17 3.6569E+01 1.3086E+01 -3.9992E+01 2.0490E+02 18 3.1837E+01 -6.1465E+00 19 2.9447E+00 -2.4869E+00 -1.1674E+01 1.9127E+00 -3.1656E+01 3.0621E-01 20 -4.2703E+00 -7.1239E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -2.3367E+02 -5.9245E+03 5.6744E+03 I/2PP 4.7851E+03 Nth COSINE SINE COSINE SINE 01 1.6012E+03 -2.1194E+03 -2.7639E÷03 2.2825E+03 02 -2.4932E+03 -5.0100E+01 9.7618E+02 -6.2491E+01 03 -4.8828E+02 9.0165E+02 -2.1275E+03 -1.5403E+02 04 -1.3928E+02 5.2739E+02 -1.8208E+02 -1.7914E+02 05 -7.0809E+02 1.3991E+02 4.9276E+02 -6.7612E+02 06 1.0872E+02 3.0462E+02 -6.8493E+01 -5.1804E+02 07 -1.7682E+02 1.5148E+02 -4.6032E+01 -2.0170E+02 08 6.4691E+01 5.5959E+01 2.9709E+01 1.1813E+02 09 -3.7795E+00 -7.1378E+00 -1.2196E+02 -5.2318E+02 10 -2.9771E+01 -9.3850E+00 6.5588E+02 3.6082E+02 11 -1.2810E+02 -3.7980E+01 1.9621E+02 -4.4467E+01 12 -1.6576E+02 -1.1156E+01 -4.0807E+01 -8.0134E+00 13 -7.0147E+01 1.0583E+01 5.1065E+01 -7.4215E+01 14 -6.5289E+00 1.7024E+01 2.4152E+01 -1.0536E+00 15 1.0012E+01 -2.9408E+00 5.2395E+00 -2.6951E+01 16 1.3142E+01 1.1933E+00 1.0434E-01 -2.0257E+01 17 -1.9343E+01 -1.3110E+01 -1.9690E+01 -3.7454E+01 18 -1.9720E+01 -2.4920E+00 2.0664E+00 -5.3029E+01 19 -7.6828E+00 -4.4898E+00 -4.0862E+00 -4.0985E+00 20 5.7042E+00 6.2602E+00 6.3191E+00 7.7257E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.1374E+03 -6.0788E+03 1/2PP 4.0384E+03 3.0569E+03 Nth COSINE SINE COSINE SINE 01 1.8402E+02 -6.8458E+02 -9.5201E+02 1.5079E+02 02 -2.6708E+03 -1.1143E+02 1.9930E+02 -9.1737E+01 03 -6.7741E+02 2.8193E+02 -9.4226E+02 -1.7555E+02 04 7.5765E+01 7.6621E+02 -4.6686E+01 1.7174E+01 05 -6.7642E+02 4.6719E+02 7.8497E+01 -2.2451E+02 06 1.5568E+02 -3.1993E+01 2.9183E+01 -2.1470E+02 07 2.6304E+02 -2.3829E+02 1.5411E+02 -2.6029E+02 08 -1.6627E+01 -3.4405E+02 2.7570E+01 -1.2595E+02 09 -6.1997E+00 -1.0705E+02 -1.0754E+02 -5.1516E+02 10 -1.2731E-01 -2.3452E+01 4.7515E+02 3.0473E+02 11 1.0326E+02 4.3764E+01 1.6868E+02 1.4497E+00 12 1.2447E+02 8.9282E+00 -8.6797E+00 1.5345E+01 13 4.5709E+01 -2.0794E+01 1.0754E+02 -8.4613E+01 14 5.6644E+00 -1.3374E+01 3.4060E+01 -1.7250E+01 15 -1.0120E+01 6.6969E+00 -3.0377E+00 -2.8292E+01 16 -I.0959E+01 1.1928E+00 -2.1259E+01 -3.3805E+01 17 6.7292E+00 3.4300E+00 -5.0295E+01 -7.0614E+01 18 9.4660E+00 3.7468E+00 5.1703E+01 -2.0956E+02 19 3.2992E+00 4.3762E+00 2.3751E+00 -1.0984E+01 20 -2.1076E-01 -2.0654E+00 3.4712E+01 8.1498E+00 Collective Control Longitudinal Cyclic Load, ib Load, Ib 5.3106E+01 -1.6408E+03 1.0578E+02 8.5769E+02 COSINE SINE Nth COSINE SINE 01 -4.8060E+00 -4.4288E+01 -2.0492E+00 1.0966E+01 02 -4.1377E+01 1.2979E+01 3.2773E+00 1.2587E+00 -9.6989E-01 -8.6331E-01 03 -5.1815E+01 3.2310E+01 2.1435E+01 7.5550E+01 04 -5.9637E+02 -2.6331E+02 -2.1259E+00 -5.6434E-01 05 2.6662E+01 -4.2841E+01 9.2155E+00 2.1990E+00 06 -5.0852E+01 -3.3792E+01 -1.6617E+00 -2.6614E+00 07 -4.9407E+00 2.7946E+01 -2.2196E+01 -I.0027E+01 08 -1.6879E+01 2.6492E+02 -9.9758E-02 -2.9860E-01 09 1.9761E+00 -1.6809E+01 -2.1489E+00 4.3539E-01 i0 7.3297E+00 7.0184E+00 -1.2178E+00 3.0698E-01 ii -2.1129E+00 -I.0189E+01 -2.6957E+00 -5.2043E+00 12 -3.5053E+01 3.0079E+01 1.5075E+00 1.8357E-01 13 -2.5394E+00 -8.6618E+00 7.0828E-01 -3.0519E-01 14 -2.1633E+00 7.0005E+00 -I.1728E-02 -1.2982E-02 15 8.2162E-01 -2.6392E+00 -1.6903E+00 -1.8237E+00 16 8.5204E+00 -9.4724E-01 4.7926E-01 3.4066E-01 17 3.0348E+00 -8.3582E-01 -4.9658E-01 -2.0805E-01 18 3.2032E+00 2.6951E-01 3.1522E-01 1.8721E-01 19 -1.6483E+00 -1.6277E+00 2.7275E-01 1.2603E+00 20 3.3685E+00 -4.1931E+00 Lateral Spider Arm Load, Cyclic Load, ib ib -7.9553E+01 MEAN -2.6506E+02 3.7466E+02 I/2PP 1.5929E+02 COSINE SINE Nth COSINE SINE 1.7413E+02 1.1669E+02 01 -6.7393E+00 3.3828E+00 3.2374E+01 3.8302E+01 02 2.6759E+00 -3.5713E+00 -4.6189E+01 2.8333E+01 03 1.0407E+01 -6.1695E+00 -5.5814E+01 -2.4583E+01 04 1.0827E+02 -5.7239E+01 -9.0896E+01 3.6401E+01 05 -4.1061E+00 8.9472E+00 4.5997E+01 1.3467E+02 06 -3.4072E+00 9.4364E+00 4.1688E-01 3.0178E+01 07 3.0509E+00 -6.2053E-01 1.2735E+01 2.0678E+01 08 2.2717E+01 -4.2360E+01 3.7554E+00 1.0297E+00 09 1.2538E+00 1.8063E+00 4.3746E+00 7.3844E+00 i0 2.6846E-01 -3.7038E+00 -6.3445E+00 -1.5101E-01 ii 1.9149E+00 1.4123E+00 -3.2075E+00 -5.7814E-01 12 1.1937E+01 2.8586E+00 13 -2.5718E+00 1.6344E+00 2.0948E+00 -I.1031E+00 5.6449E+00 -2.5804E-01 14 4.8128E-01 -I.0854E+00 -I.0798E+00 -2.0453E+00 15 -3.9646E-01 7.9756E-01 -1.2192E+00 1.5011E+00 16 -2.1051E+00 2.2391E+00 9.8489E-02 -9.4123E-01 17 -7.3357E-01 -9.1779E-01 18 -1.3632E+00 -2.5340E-01 -5.2958E-01 -5.8204E-01 19 -4.7682E-03 3.5523E-01 5.5490E-02 -8.1397E-01 -4.9509E-01 -8.6705E-02 20 3.8180E-01 -1.3096E-01 Blade Lag Damper Load, Feathering ib Angle, deg 1.5938E+01 5.5357E+02 6.4091E+00 1.3353E+03 Nth COSINE SINE COSINE SINE 01 1.1913E+00 -5.9889E+00 1.3290E+02 1.3227E+03 02 4.5090E-01 6.6450E-01 2.0568E+02 -3.8159E+01 03 8.1969E-02 -1.7222E-01 -8.1465E+01 4.3483E+01 04 -2.8209E-01 -9.9741E-04 -2.2560E+01 3.0974E+01 05 -4.2861E-01 1.1119E-01 -2.5305E+01 -2.5076E+01 06 4.0672E-03 2.5136E-01 -2.1645E+01 5.6054E+00 07 -7.0824E-03 4.0120E-02 1.5412E+00 7.2522E+00 08 1.0439E-02 1.6816E-02 -1.7762E+01 -4.4791E+01 09 -4.7156E-03 -7.6155E-02 1.3374E+01 2.8304E+00 10 1.1071E-01 9.4631E-02 -2.1101E+01 -1.3086E+01 11 1.4725E-02 -2.6941E-02 -8.2185E+00 3.6481E+00 12 -4.7717E-02 1.6702E-02 -1.6151E+01 1.1294E+01 13 -1.3389E-02 -1.8055E-02 -4.1384E+00 2.1273E+00 14 9.8709E-03 -4.7967E-03 -7.5458E+00 -5.9553E-01 15 -1.0199E-02 -3.1197E-02 4.7515E+00 -1.9498E+00 16 1.0364E-02 1.1330E-02 4.3478E+00 -1.9440E+00 17 1.3831E-04 -8.6694E-03 -5.2840E+00 -1.9723E+00 18 4.5260E-03 2.3069E-02 -2.5179E-01 -1.2093E+01 19 -5.9676E-03 -6.9730E-03 1.6069E+00 -1.7173E+00 20 -4.2883E-03 6.9843E-03 1.9668E+00 -6.5404E-01 MR Shaft Torque, in-lb MEAN 1.8212E+05 I/2PP 1.5020E+04 Nth COSINE SINE 01 1.0076E+03 1.5403E+03 02 7.7975E+03 6.8570E+03 03 1.1427E+02 2.3088E+02 04 1.8542E+03 3.2719E+03 05 3.4022E+02 -2.3074E+02 06 -1.2131E+03 1.5222E+03 07 -1.4406E+02 -1.5052E+02 08 -3.5108E+01 1.3038E+03 09 8.5034E+01 -1.3971E+02 10 6.9665E+02 3.8240E+02 11 -5.3174E+01 -1.3704E+02 12 5.1843E+02 -6.3553E+02 13 -1.0404E+02 -1.2481E+01 14 9.2929E+00 1.7365E+02 15 -4.5701E+01 -3.6689E+01 16 -5.0734E+01 1.2727E+02 17 2.1276E+01 -4.8354E+01 18 -9.2152E+01 -6.7942E+01 19 3.4325E+01 -2.5098E+01 20 6.2185E+00 -1.8493E+00 Flight 497, Condition G Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb 7.1316E+03 MEAN 2.4017E+04 3.5693E+04 I/2PP 2.5975E+04 SINE Nth COSINE SINE COSINE -1.7452E+04 2.1949E+04 01 -4.1337E+03 2.7978E+03 2.1569E+03 1.6389E+03 02 -I.1804E+04 -6.1231E+03 03 3.9258E+03 -8.6552E+03 3.7694E+03 -1.7636E+03 04 1.9060E+03 2.4900E+03 -7.4487E+02 3.0295E+02 05 -3.4427E+03 2.2415E+03 -2.6279E+03 2.7063E+03 1.3916E+03 06 3.5204E+02 -8.5203E+02 7.5090E+02 07 -9.3956E+02 6.1005E+02 2.0501E+02 -7.2742E+01 08 4.7828E+02 4.3651E+02 9.1791E+00 -1.0871E+02 -7.8503E+02 09 -2.8260E+02 2.5992E+02 -3.5750E+02 1.7895E+03 10 -7.9558E+01 -2.6567E+02 6.8189E+02 2.1981E+02 ii -I.II01E+02 8.1464E+01 4.1059E+02 1.6550E+01 -9.5018E+01 12 -2.3888E+01 2.6879E+02 -5.6152E+01 13 -4.9169E+01 4.6437E+01 -3.3300E+01 1.8915E+01 14 1.0136E+02 1.7064E+01 -2.9039E+01 -5.7774E+01 15 1.8499E+01 -2.5094E+01 7.1293E+00 1.5905E+01 16 9.9742E+01 -5.0712E+01 2.7391E+01 -7.5244E+01 17 1.0114E+02 5.5043E-01 -3.3374E+01 -5.5903E+01 7.9863E+01 18 -2.9425E+00 2.3697E+00 -2.4030E+01 19 -5.0138E+00 -2.3674E+01 -1.6601E+01 -1.6837E+01 20 3.1693E+01 -8.4204E+00 -1.3057E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb 7.2199E+03 MEAN 1.7776E+04 1.5758E+04 I/2PP 5.1140E+03 COSINE SINE Nth COSINE SINE .2078E+04 9.5434E+03 01 -9.6603E+02 4.3555E+02 -I .1778E+02 1.0508E+03 02 -3.2324E+03 -4.8292E+02 4 .3504E+03 -1.5432E+03 03 6.4024E+02 -I.1492E+03 1 04 8.5663E+01 -1.9088E+02 -i .6662E+02 -2.4284E+02 .3657E+02 8.3210E+02 05 9.2459E+02 -3.2914E+02 -6 .3290E+02 3.3199E+02 06 -2.4572E+02 1.2633E+01 1 .2533E+01 -6.0241E+01 07 5.3013E+02 -2.6893E+02 4 .4746E+01 -1.7801E+02 08 -3.0026E+02 -3.0122E+02 1 .2039E+01 -1.1760E+02 09 6.5074E+01 -1.5297E+02 -4 .6199E+02 2.0002E+02 10 3.5678E+01 1.2581E+02 1 ii 7.4428E+01 -I.0562E+02 6 .4305E+01 -2.2874E+01 12 5.6676E+01 -1.7249E+02 3 .2575E+01 -4.2114E+01 13 I.I065E+01 -3.5941E+01 2 .8692E+01 1.6995E+00 14 -3.7288E+01 -7.1960E+00 -3 .0694E+00 -7.8170E+00 .0017E+01 2.5131E+01 15 -3.4666E+01 8.1354E+00 1 16 -7.4789E+01 4.3390E+01 1 .1385E+01 -1.3473E+01 17 -I.I196E+02 -2.7041E+00 -I .3366E+01 -1.4305E+00 .8042E+00 -4.1015E+00 18 9.2138E+00 -1.4021E+01 9 19 1.6712E+00 1.7457E+01 -7 .4580E+00 1.1496E+01 .0226E+01 -2.1453E+00 20 -2.2751E+01 -7.3158E+00 -i Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.7445E+04 3.6430E+03 1.2653E+04 1/2PP 5.1175E+03 Nth COSINE SINE COSINE SINE 01 -1.3601E+03 8.4022E+02 -8.0288E+03 8.3874E+03 02 -1.4460E+03 2.3847E+02 1.0740E+03 4.7089E+02 03 -2.8633E+02 8.2467E+02 -1.1076E+02 -1.0001E+03 04 -2.5807E+02 -8.1762E+02 8.1856E+01 -5.7533E+02 05 2.2264E+03 -1.1269E+03 -8.0920E+01 8.3068E+01 06 -5.6400E+02 -6.3946E+01 5.2272E+01 -2.5678E+01 07 6.9886E+02 -4.2400E+02 -2.1679E+02 1.7297E+02 08 -3.8986E+02 -3.8799E÷02 8.7727E+01 -6.7271E+01 09 2.4080E+02 -1.9447E+02 1.4491E+02 2.7307E+02 10 1.5081E+01 -8.2729E+00 -2.8298E+02 -6.2556E+02 11 -1.8613E+01 -9.3882E+01 -1.9787E+02 -2.1199E+01 12 -4.6460E+00 -1.5888E+02 1.1820E+01 -9.1664E+00 13 2.7728E+01 1.7596E+00 -2.6516E+00 3.0975E+01 14 -1.7845E+00 -1.1587E+01 1.8690E+01 -2.2087E+01 15 1.0498E+01 1.6375E+01 -3.7593E+00 1.8362E+01 16 -1.6334E+01 1.2266E+01 5.5070E+00 -2.1412E+01 17 -1.3409E+01 -4.0288E+00 9.5853E+00 2.1910E+01 18 4.6931E+00 -6.3437E+00 2.0033E+01 -5.6907E+01 19 1.3791E+01 8.9177E+00 8.2289E+00 1.4722E+01 20 -3.6281E+00 -7.6681E+00 1.3478E+01 -1.2197E+01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.2407E+04 -2.2296E+03 I/2PP 4.9177E+03 1.2454E+04 Nth COSINE SINE COSINE SINE 01 2.8978E+02 -3.0822E+02 -6.3666E+03 9.4478E+03 02 -6.5857E+02 6.9081E+02 1.4435E+03 -1.1670E+02 03 -8.7658E+02 1.7068E+03 -1.6869E+03 -8.7789E+02 04 -3.1131E+02 -9.5663E+02 5.7594E+02 -9.0926E+02 05 2.1405E+03 -1.4219E+03 1.0421E+03 -1.1038E+03 06 -5.1661E+02 -1.7421E+02 -1.6862E+02 -4.7670E+02 07 2.3150E+02 -2.7096E+02 -2.6136E+02 2.1010E+02 08 -1.6812E+02 -6.3455E+01 2.4429E+01 1.2570E+02 09 1.6812E+02 -4.2019E+01 2.1653E+02 4.1425E+02 10 -5.2833E+01 -1.4231E+02 -4.4805E+02 -8.7886E+02 11 -7.4491E+01 2.7406E+01 -2.5864E+02 -1.3699E+01 12 -8.0064E+01 8.8816E+01 6.9712E+00 -1.2568E+01 13 4.2021E+00 4.0396E+01 -4.7057E+01 1.5476E+01 14 2.4032E+01 5.8256E-01 1.1972E+01 -1.6045E+01 15 4.7119E+01 -1.3893E+01 -4.8453E+01 -8.6225E+00 16 4.8056E+01 -3.7504E+01 -4.3772E+01 1.3756E+01 17 1.0418E+02 -2.8922E+00 -3.8336E+01 2.3135E+01 18 -1.9890E+01 1.3414E+01 -1.2419E+01 7.9001E+00 19 6.9432E+00 -1.8848E+01 -9.2120E+00 1.0103E+01 20 1.0500E+01 7.7008E+00 1.0110E+01 -1.3296E+01 I04 Edg.Bending @48%R, Flat.Bending @48%R, in-lb

in-lb

-1.8828E+03

MEAN 5.0627E+03

9.6995E+03 1/2PP 5.0654E+03 COSINE SINE Nth COSINE SINE -4.4893E+03 6.0579E+03 01 1.6144E+03 -2.0015E+03 1.2827E+03 -3.9132E+02 02 -1.3506E+03 3.6605E+02 -2.7889E+03 -4.3845E+02 03 -7.5872E+02 1.5520E+03 8.5793E+02 -8.6275E+02 04 -1.3907E+02 -4.6582E+02 1.7886E+03 -2.1555E+03 05 3.3702E+02 -2.0902E+02 -2.9783E+02 -7.4458E+02 06 -4.4021E+01 -2.3339E+02 -1.8506E+02 1.8357E+01 07 -3.5300E+02 1.7091E+02 -2.7431E+01 4.6364E+02 08 2.6462E+02 2.9902E+02 -7.2121E-01 -2.7489E+01 09 -1.8155E+02 1.5997E+02 7.1857E+01 3.0416E+02 10 -6.0106E+00 1.8865E+01 1.2657E+02 1.4712E+01 11 5.0079E+01 5.4706E+01 -2.0932E+01 1.4819E+00 12 2.2187E+01 6.3065E+01 -2.2553E+01 -4.0489E+01 13 -1.8636E+01 -2.3716E+01 -2.6507E+01 -3.2476E+00 14 -1.6420E+01 1.0022E+00 -5.0696E+01 -2.7733E+01 15 -3.8072E+01 8.1428E+00 -7.9006E+01 4.7466E+01 16 -4.4826E+01 1.4518E+01 -8.1004E+01 -1.4929E+01 17 -7.1346E+01 -7.1395E+00 18 1.3208E+01 -1.3405E+01 -5.8821E+01 1.2433E+02 -3.5275E+01 -8.7487E+00 19 -5.2947E+00 9.8449E+00 20 -4.8796E+00 -1.5527E+01 -2.2074E+01 6.1094E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -2.4328E+02 -5.2708E+03 7.8916E+03 1/2PP 5.0921E+03 Nth COSINE SINE COSINE SINE 01 1.6958E+03 -2.0661E+03 -2.8363E+03 3.0497E+03 02 -2.7542E+03 -I.0894E+02 1.0933E+03 -3.3698E+02 03 -5.2692E+02 7.1581E+02 -2.3442E+03 -3.3941E+02 04 -5.4375E+01 6.0102E+02 6.3550E+02 -5.8428E+02 05 -1.11lIE+03 5.3139E+02 1.2560E+03 -1.9697E+03 -2.8841E+02 -5.9878E+02 06 3.0261E+02 1.9585E+02 07 -2.2349E+02 1.2431E+02 7.1145E+00 -8.6641E+01 08 7.4716E+01 1.0829E+01 -5.1824E+01 3.0033E+02 09 -3.8589E+01 3.0927E+01 -9.4873E+01 -4.4765E+02 10 1.4645E+01 6.6415E+01 4.8842E+02 9.8743E+02 ii 8.7316E+00 -6.4065E+01 3.0710E+02 2.2589E+00 -7.6031E+00 -1.1414E+00 12 4.7157E+01 -1.4067E+02 5.3476E+01 -1.3273E+01 13 2.8232E+00 7.1245E+00 14 3.5733E+00 -6.9025E+00 -5.0076E+00 1.5196E+01 15 6.1515E+00 4.8580E+00 3.5763E+01 3.1694E+00 16 3.0453E+01 3.1966E+00 3.6627E+01 -1.5422E-01 17 2.6866E+01 1.5211E+01 3.4050E+01 -1.2623E+01 18 -4.9995E+00 4.8940E+00 1.3884E+01 -1.8348E+01 1.3713E+01 -1.7083E+01 19 -5.0437E-01 -2.4882E+00 -5.2904E+00 8.2221E+00 20 7.6021E+00 9.7064E+00 Edg.Bending @81%R, Flat.Bending @81%R, in-lb in-lb MEAN -4.2912E+03 -5.8147E+03 3.7380E+03 1/2PP 4.5160E+03 Nth COSINE SINE COSINE SINE 01 1.1377E+02 -7.7545E+02 -9.5876E+02 5.9839E+02 02 -3.2712E+03 -4.2216E+02 2.9804E+02 -2.1808E+02 03 -5.9764E+02 -1.1577E+02 -1.0377E+03 -4.1374E+02 04 3.8629E+02 7.5146E+02 4.5164E+02 -5.1142E+01 05 -1.1815E+03 8.5367E+02 4.5355E+02 -7.7066E+02 06 4.7551E+01 7.0217E+01 -6.6055E+01 -2.4929E+02 07 4.0164E+02 -1.2006E+02 2.2219E+02 -1.6910E+02 08 -1.8479E+02 -2.8232E+02 -6.6081E+01 1.3461E+01 09 8.3517E+01 -1.2858E+02 -3.7902E+01 -4.8605E+02 10 3.0708E+00 -9.4495E+01 3.2972E+02 7.2606E+02 11 -2.2152E+01 6.1006E+01 1.7524E+02 4.5289E+01 12 -4.1865E+01 9.1860E+01 -3.7514E+01 6.4869E+01 13 4.5902E+00 -4.5114E+00 8.5889E+01 4.0158E+01 14 1.0856E+01 5.5470E+00 3.4111E+01 2.2997E+01 15 -2.9595E-01 2.8325E-01 7.8406E+01 5.3689E+00 16 -1.7274E+01 -5.6694E+00 7.3750E+01 -3.8970E+01 8.4679E+01 -9.9195E+00 17 -1.1074E+01 -6.5451E+00 18 3.8375E+00 -2.0285E+00 5.2365E+01 -1.0976E+02 19 -1.9791E+00 2.8364E+00 4.4283E+01 -6.3494E+00 20 -5.4657E+00 -6.3552E+00 2.1423E+01 4.6935E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -2.1870E+03 1.5103E+02 I/2PP 1.4356E+03 2.1210E+02 Nth COSINE SINE COSINE SINE 01 -2.3315E+01 -5.5957E+01 5.8462E+00 1.3025E+01 02 -5.0963E+01 4.9048E+01 -3.3566E-01 -2.9694E+00 03 -4.2082E+01 5.4587E+01 -4.0512E+00 -9.8899E-01 04 -1.3602E+03 -1.2797E+02 1.0477E+02 1.3203E+02 05 5.4931E+01 -1.1887E+02 -9.6308E+00 6.6096E+00 06 -1.3280E+02 -3.9507E+01 2.2016E+01 1.9111E+00 07 -8.0741E+00 2.0519E+01 -1.2848E+00 -3.4054E+00 08 -4.9991E+00 1.4462E+02 -2.5423E+01 2.3168E+01 09 5.5875E+00 -6.1413E+00 -3.1824E+00 -3.3778E+00 10 -2.1563E+01 7.8514E+00 2.5805E+00 3.3804E+00 11 1.8952E+01 -2.0708E+00 -2.7779E+00 -4.6153E-01 12 1.8824E+02 7.3110E+01 -2.3779E+01 -6.0223E+00 13 -1.9802E+01 -1.1109E+00 1.7213E+00 -2.8396E+00 14 1.0635E+01 1.0190E+00 -1.4196E+00 -1.1708E-01 15 1.5778E+00 -8.3365E+00 1.6102E+00 -6.7394E-01 16 1.5112E+01 -2.4320E+01 1.4039E+00 -1.5921E+00 17 -2.9013E+00 3.7047E+00 -9.8759E-01 3.9867E-01 18 6.1869E+00 -1.8641E+00 -5.4383E-02 1.8514E+00 19 -1.0500E+00 -3.1066E+00 4.0350E-02 -3.8925E-01 20 -8.8289E+00 -1.6270E+01 -2.1804E+00 1.5507E+00 I06 Lateral Cyclic Load, Spider Arm Load, ib ib -3.1742E+02 -1.2360E+02 3.0839E+02 6.3353E+02 Nth COSINE SINE COSINE SINE 01 -6.0999E-01 -I.0955E-01 1.9701E+02 2.0278E+02 02 4.7913E+00 -6.7643E+00 5.3868E+01 7.5518E+01 03 1.0006E+01 -9.9197E+00 -7.4628E+01 6.3782E+01 04 2.0681E+02 -1.8366E+02 -I.1621E+02 -1.5381E+01 05 -4.4791E+00 2.1052E+01 -1.5734E+02 1.1842E+02 06 -I.0158E+00 1.8361E+01 1.5173E+02 1.7825E+02 07 3.9377E+00 3.0584E-01 1.1934E+01 2.0689E+01 08 -1.2705E+01 -3.8538E+01 8.9325E+00 1.2504E+01 09 3.9677E+00 -2.4969E+00 -5.3444E+00 -2.5131E+00 i0 -3.4629E+00 -5.1769E+00 9.0244E+00 1.5227E+01 ii 2.5966E-02 9.7164E-01 4.8881E+00 1.1377E+00 12 -1.4569E+00 -6.1157E+00 2.0779E+00 -I.1984E+00 13 5.1388E+00 2.6083E+00 -I.I195E+00 -1.3591E+01 14 -2.8047E+00 -4.3045E+00 -1.5121E+01 5.3578E+00 15 -1.5831E+00 3.2204E+00 -1.4990E+00 1.2022E-01 16 6.1850E+00 6.2425E+00 4.9184E-01 2.4687E+00 17 -8.1327E-01 1.3271E+00 1.6346E+00 -2.1798E+00 18 -I.0272E-01 -I.1890E+00 -5.6502E-01 9.3768E-01 19 -6.0343E-02 8.6959E-01 7.2936E-01 -2.5504E-01 20 2.1336E+00 7.7326E-01 1.9609E+00 2.6362E+00 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.7874E+01 5.4544E+02 I/2PP 7.4718E+00 1.3978E+03 Nth COSINE SINE COSINE SINE 01 1.9035E+00 -6.8446E+00 3.7584E+02 1.3630E+03 02 6.2483E-01 9.0206E-01 2.3181E+02 -8.4278E+01 03 1.4855E-01 -6.3169E-02 -I.0474E+01 8.0547E+01 04 -5.2603E-01 5.4743E-03 3.6837E+01 -2.5834E+00 05 -7.5473E-01 5.0562E-01 -2.1556E+01 2.7722E+01 06 1.8960E-01 3.7537E-01 3.0096E+01 3.0972E+01 07 4.2024E-02 3.2194E-02 -8.9524E+00 3.5859E+01 08 1.0673E-02 6.2637E-02 -3.2973E+00 -8.8879E+00 09 -2.8958E-02 -5.2218E-03 1.7438E+01 1.2314E+01 I0 5.0690E-02 1.8320E-01 -3.0797E+01 -2.1588E+01 Ii 3.2330E-02 2.9322E-02 -1.9143E+01 1.7122E+01 12 -4.6485E-03 3.9378E-02 -6.5161E+00 -1.5869E+01 13 -5.8636E-03 -2.8835E-02 -I.1801E+01 2.7194E+00 14 3.4152E-03 4.1193E-03 5.3856E+00 -1.2714E+00 15 -2.7986E-02 -2.7366E-02 4.5040E-01 -7.9424E+00 16 -7.2589E-03 2.5676E-02 4.6382E+00 -7.5334E-01 17 -1.7194E-02 1.2795E-02 -9.0617E-01 -2.5527E+00 18 -9.1580E-03 2.0941E-02 -3.2396E-02 -I.0852E+01 19 -I.1865E-02 -3.0964E-03 5.7553E+00 -I.0387E+00 20 -I.I025E-03 5.4163E-03 2.6099E+00 -6.3004E+00 MR Shaft Torque, in-lb MEAN 2.2176E+05 1/2PP 1.9720E+04 Nth COSINE SINE 01 9.1887E+02 6.9103E+02 02 1.2012E+04 9.7300E+03 03 -1.8087E+02 4.5034E+02 04 -3.0312E+03 2.8229E+03 05 8.5364E+02 -5.7349E+02 06 -1.5719E+03 3.5045E+03 07 6.7623E+01 -1.6783E+02 08 5.7038E+02 1.6697E+03 09 2.0313E+01 -1.6452E+02 10 5.0383E+02 1.7285E+02 11 -6.4846E+01 -1.3669E+02 12 3.1346E+02 9.8296E+01 13 3.6901E+01 -8.7858E+01 14 1.0393E+02 -1.9499E+02 15 -6.9286E+00 -6.3471E+01 16 -9.9364E+01 -5.2252E+01 17 -7.2416E+01 -5.0959E+00 18 -1.7475E+02 -5.9743E+01 19 -3.8161E+01 2.1861E+00 20 -6.5138E+01 -2.3150E+01 Flight 497, Condition H Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 2.2916E+04 9.7983E+03 I/2PP 2.8773E+04 3.5408E+04 Nth COSINE SINE COSINE SINE 01 -1.1394E+03 4.0504E+03 -1.6722E+04 2.2335E+04 02 -1.3746E+04 -6.1996E+03 2.2383E+03 1.5018E+03 03 2.9893E+03 -1.1256E+04 3.5200E+03 -2.9534E+03 04 2.5921E+03 2.4012E+03 -4.6248E+02 1.8375E+02 05 -2.8733E+03 2.6968E+03 -2.0215E+03 2.8517E+03 06 1.7771E+02 -9.0017E+02 8.4362E+02 1.3559E+03 07 -9.9441E+02 9.0647E+02 1.7269E+02 -1.2247E+02 08 6.7443E+02 3.4686E+02 3.0430E+00 -8.2103E+00 09 -2.4188E+02 3.1667E+02 -8.5326E+02 -7.6665E+02 10 -1.5214E+02 -2.4463E+02 3.4132E+02 1.1358E+03 11 -1.2138E+02 2.7468E+01 4.4942E+02 2.3168E+02 12 -1.0885E+02 3.1996E+02 5.2815E+00 -1.9885E+02 13 -2.7656E+01 5.3934E+01 -4.3480E+01 -2.8644E+01 14 6.8046E+01 -2.3382E+01 -5.1292E+01 1.8833E+01 15 8.4875E+00 -2.7954E+01 -4.5293E+01 -3.9537E+01 16 -8.2894E+00 -6.0712E+01 3.1139E+01 -1.1706E+01 17 7.1264E+01 -4.1395E+01 -2.1468E+01 -2.3748E+01 18 -8.1996E+00 2.9586E+01 3.6171E+01 1.4344E+02 19 -2.1260E+01 -2.3063E+00 -1.2330E+01 2.7315E+01 20 5.5554E+00 -4.7469E+01 -3.1192E+01 -I.0184E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.7342E+04 8.6325E+03 I/2PP 6.1870E+03 1.5788E+04 COSINE SINE Nth COSINE SINE 01 3.0328E+02 7.1437E+02 -1.1677E+04 9.8630E+03 02 -3.6266E+03 -4.6658E+02 4.0983E+02 1.0729E+03 03 5.4395E+02 -1.4892E+03 1.1783E+03 -1.9955E+03 04 1.2788E+01 -2.0149E+02 -2.0820E+02 -2.7809E+02 05 8.2466E+02 -3.7784E+02 -4.0162E+02 8.9152E+02 06 -2.5708E+02 2.4083E+01 2.0850E+02 3.1405E+02 07 5.7304E+02 -4.4306E+02 3.4327E+01 -8.0519E+01 -3.2717E+01 -1.6761E+02 08 -4.1969E+02 -2.3115E+02 09 -1.3125E+01 -1.1665E+02 -9.3123E+01 -1.0349E+02 10 6.8658E+01 1.1944E+02 9.3105E+01 1.3131E+02 11 8.0472E+01 -9.8978E+01 7.6159E+01 -1.8176E+01 12 1.2492E+02 -2.1065E+02 2.8813E+01 -5.9724E+01 13 -6.4905E+00 -1.4759E+01 2.7771E+01 8.7710E+00 14 -9.0117E+00 6.0466E+00 -1.4098E+01 -4.2055E+00 9.7725E+00 1.2784E+01 15 -1.6666E+01 1.7913E+01 16 1.9671E+01 3.8148E+01 1.3040E+01 -4.2225E+00 17 -7.7662E+01 2.5928E+01 -2.0278E+01 -5.1931E+00 18 -2.8061E+00 -4.1732E+01 4.8231E+00 -6.2478E+00 19 2.3339E+01 5.1074E+00 4.5916E+00 8.0510E+00 20 -1.1352E+00 1.7188E+01 -8.6004E+00 1.0230E+01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb 4.6468E+03 MEAN 1.7318E+04 1.2164E+04 1/2PP 5.2932E+03 Nth COSINE SINE COSINE SINE -7.8231E+03 8.5242E+03 01 -4.9461E+02 1.0297E+03 02 -1.5605E+03 2.9168E+02 1.0779E+03 4.6732E+02 03 -1.9182E+02 1.0899E+03 -3.4224E+02 -1.1939E+03 -2.0982E+02 -4.4707E+02 04 -5.3321E+02 -8.0266E+02 -3.6385E+01 8.3172E+01 05 1.9914E+03 -1.3211E+03 7.8442E+01 -5.8105E+01 06 -5.9692E+02 -1.8052E+01 -1.8778E+02 2.3676E+02 07 7.4079E+02 -6.5744E+02 08 -5.5130E+02 -3.0456E+02 3.0928E+01 -7.3877E+01 09 1.8983E+02 -1.7652E+02 3.1629E+02 2.1956E+02 10 7.3040E+01 -I.0277E+01 -1.5614E+02 -3.9257E+02 11 -2.5188E+01 -6.9342E+01 -2.0892E+02 -3.3185E+01 12 4.1822E+01 -1.8528E+02 1.1905E+01 3.5601E+01 5.3512E+00 9.6091E+00 13 4.1078E+00 1.1881E+01 1.9882E+01 -4.0552E+00 14 1.9716E+01 -1.4905E+01 1.0999E+01 -1.7080E+00 15 1.8319E+01 9.3226E+00 16 1.1271E+01 4.1553E+00 5.8397E+00 -3.1039E+00 6.6594E+00 4.0593E+00 17 -2.0890E+01 2.6202E+00 -3.3269E+01 -6.3767E+01 18 1.7600E+00 -1.8913E+01 19 1.0629E+01 -1.3729E+00 6.3544E+00 -1.2643E+01 1.1176E+01 -7.6216E+00 20 -2.0187E+00 -3.4844E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.2468E+04 -1.3217E+03 I/2PP 5.2216E+03 1.1793E+04 Nth COSINE SINE COSINE SINE 01 6.8144E+02 -2.5326E+02 -6.0322E+03 9.5758E+03 02 -5.4156E+02 8.5236E+02 1.3645E+03 -1.3088E+02 03 -7.3035E+02 2.3046E+03 -2.0041E+03 -8.0904E+02 04 -5.8897E+02 -9.3802E+02 -4.4454E+01 -6.3642E+02 05 1.8748E+03 -1.6171E+03 7.9990E+02 -1.1988E+03 06 -5.4242E+02 -1.1136E+02 -1.9373E+02 -4.9105E+02 07 1.9869E+02 -3.7855E+02 -2.2482E+02 2.5465E+02 08 -1.8903E+02 -2.0149E+01 1.7709E+01 1.3923E+02 09 1.7468E+02 -6.1589E+01 4.6838E+02 3.3771E+02 -2.3996E+02 -5.3597E+02 10 -1.3782E+01 -1.4717E+02 11 -1.0634E+02 3.4486E+01 -2.9336E+02 -3.3149E+01 12 -1.1524E+02 9.6835E+01 3.0861E+00 5.5248E+01 13 7.8891E-01 2.8897E+01 -5.2583E+01 -1.6548E+01 14 1.6212E+01 -6.3599E+00 2.9540E+01 4.6729E+00 15 2.1147E+01 -1.9623E+01 -3.2113E+01 -2.6175E+00 16 -2.2010E+01 -3.0590E+01 -3.0975E+01 2.8197E+01 17 6.2310E+01 -2.3168E+01 5.1803E-01 1.8032E+01 18 -2.1244E+00 4.1023E+01 1.2611E+01 3.4751E+01 19 -1.7987E+01 -3.5573E+00 -2.1597E+00 7.2016E+00 20 -2.9973E+00 -1.1818E+01 6.5410E+00 -7.4831E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 5.1979E+03 -1.2395E+03 1/2PP 5.5346E+03 9.7236E+03 Nth COSINE SINE COSINE SINE 01 1.6470E+03 -2.0292E+03 -4.2652E+03 6.0918E+03 02 -1.2091E+03 6.8242E+02 1.1281E+03 -4.2086E+02 03 -5.9176E+02 1.9972E+03 -2.9889E+03 -5.4939E+01 04 -2.5807E+02 -4.2572E+02 1.4389E+02 -5.7324E+02 05 3.1304E+02 -2.7148E+02 1.3408E+03 -2.2957E+03 06 -4.8588E+01 -1.8814E+02 -3.3067E+02 -7.2534E+02 07 -4.4865E+02 2.9760E+02 -1.9944E+02 -7.9698E+00 08 3.9125E+02 2.1310E+02 1.3907E+02 4.7065E+02 09 -1.4524E+02 1.5250E+02 -4.0342E+01 -6.2328E+01 10 -5.3755E+01 2.7431E+01 5.4901E+01 2.0362E+02 11 5.9873E+01 3.4423E+01 1.0688E+02 6.1242E+00 12 2.7622E+01 7.8437E+01 -2.5468E+01 1.4127E+00 13 -8.3324E+00 -9.3819E+00 -4.5761E+01 -1.6898E+01 14 -1.7706E+01 1.3472E+01 -1.7012E+01 -1.0340E+01 15 -2.1851E+01 2.2417E+01 -6.0228E+01 1.2647E+01 -6.4969E+01 4.4428E+01 16 6.8049E+00 2.5734E+01 17 -4.8533E+01 1.7054E+01 -4.1358E+01 9.4436E+00 18 -1.1104E+00 -2.9882E+01 7.6879E+01 1.7574E+02 19 1.0666E+01 6.0642E+00 -1.5868E+01 3.5575E+01 20 -3.3280E+00 7.5056E+00 -1.6400E+01 2.3721E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb -4.9401E+03 MEAN -I.0291E+02 7.6317E+03 I/2PP 5.2288E+03 Nth COSINE SINE COSINE SINE 01 1.6847E+03 -2.1338E+03 -2 .7613E+03 3.0695E+03 02 -2.6869E+03 3.0180E+02 9 .2569E+02 -3.7470E+02 03 -4.4094E+02 8.1932E+02 -2 .4834E+03 7.4069E+01 04 1.3103E+02 6.9511E+02 1 .5798E+02 -2.8571E+02 05 -I.0448E+03 6.3229E+02 8 .2726E+02 -2.0754E+03 06 3.7870E+02 1.3275E+02 -3 .3341E+02 -5.3324E+02 07 -1.9215E+02 2.0221E+02 -2 .1651E+01 -1.8563E+02 08 5.2674E+01 -1.7161E+01 7 .6251E+01 3.4634E+02 09 -3.2842E+01 2.2411E+01 -3 .5505E+02 -4.1895E+02 i0 1.2430E+01 8.5713E+01 2 .9273E+02 6.0429E+02 ii 3.8820E+01 -5.3277E+01 3 .3171E+02 1.7605E+00 12 6.7647E+01 -1.4928E+02 -8 .7934E+00 -6.8488E+01 13 9.3332E+00 -8.3581E+00 5 .0724E+01 7.7474E+00 14 I.I084E+01 -1.2506E+01 -i .0454E+01 -I.0027E+01 15 1.1581E+01 -1.2360E+01 2 .2482E+01 -1.2069E+00 16 1.0339E+01 -1.4669E+01 3 .2513E+01 -1.6113E+01 17 2.5639E+01 -3.0243E+00 9 .6527E+00 -3.5899E+00 18 -4.1848E-01 1.3681E+01 -I .9416E+01 -4.3520E+01 19 -2.9773E+00 -4.1625E+00 5 .3195E+00 -I.1624E+01 20 6.7626E+00 -2.7135E+00 -4 .3671E+00 -1.0972E+01 Flat. Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.1972E+03 -5.8296E+03 I/2PP 4.6890E+03 3.7046E+03 Nth COSINE SINE COSINE SINE 01 5.3530E+01 -7.7947E+02 -9.9772E+02 6.3577E+02 02 -3.3714E+03 -I.1917E+02 1.8360E+02 -2.5987E+02 03 -5.4501E+02 -9.7047E+01 -I.1308E+03 -2.7005E+02 04 6.3599E+02 7.7248E+02 2.9834E+02 1.0472E+02 05 -9.8823E+02 9.6211E+02 2.8877E+02 -8.0951E+02 06 -6.6973E+01 1.9199E+01 -I.1559E+02 -2.4440E+02 07 4.6734E+02 -2.4846E+02 1.9949E+02 -2.9261E+02 08 -2.8781E+02 -1.9404E+02 -5.0037E+01 7.6943E+01 09 8.0980E+01 -9.7804E+01 -2.6398E+02 -4.4635E+02 i0 -8.8642E-01 -I.0640E+02 1.9001E+02 4.0762E+02 ii -3.6478E+01 4.0783E+01 2.0534E+02 5.0221E+01 12 -5.9748E+01 1.0331E+02 -2.9426E+01 1.0241E+01 13 -8.9515E+00 6.8651E-01 9.0579E+01 4.1244E+01 14 1.8510E+00 5.6654E+00 1.6429E+01 -2.7801E+00 15 -8.9766E-01 7.9750E+00 6.7052E+01 -1.7279E+01 16 -9.5513E+00 7.3825E+00 6.4530E+01 -4.9230E+01 17 -1.2405E+01 1.7595E+00 3.3085E+01 -2.4042E+01 18 2.7416E+00 -5.7199E+00 -8.8689E+01 -1.8700E+02 19 2.6737E+00 4.5572E+00 1.8404E+01 -3.9882E+01 20 -5.0563E+00 1.6472E+00 2.0617E+01 -2.5758E+01 Collective Control Longitudinal Cyclic Load, ib Load, Ib MEAN -2.3131E+03 1.3719E+02 I/2PP 1.4392E+03 2.2712E+02 Nth COSINE SIRE COSINE SINE 01 1.1537E+01 -6.4771E+01 3.1651E+00 9.9664E+00 02 -9.6017E+01 3.6068E+01 2.4125E+00 1.6310E-01 03 -1.7803E+01 7.4880E+01 -8.2686E+00 -5.2584E+00 04 -1.2842E+03 -2.7577E+02 9.8942E+01 1.5668E+02 05 -4.8699E+00 -1.4368E+02 -5.7644E+00 1.2710E+01 06 -1.4411E+02 -1.1484E+01 2.0554E+01 -1.7663E+00 07 _2.7627E+01 2.7983E+01 1.9068E+00 -4.0277E+00 08 5.4493E+01 1.3681E+02 -3.1156E+01 3.0732E+01 09 -2.9153E+00 -3.6809E+00 -3.8643E+00 -1.2300E+00 10 -1.9094E+01 1.1780E+01 4.4850E+00 1.9165E+00 11 -1.8441E+01 8.0144E+00 1.6499E+00 1.6286E+00 12 1.9946E+02 4.3052E+01 -2.2995E+01 -4.7510E+00 13 -5.7724E+00 1.1470E+01 6.3610E-01 -1.6385E+00 14 6.3556E+00 -4.0534E+00 -1.6941E+00 8.4870E-02 15 3.3211E+00 -3.2699E+00 1.3718E+00 -3.9346E-01 16 -1.0936E+01 -3.4561E+01 1.9004E+00 -4.8839E-01 17 3.6628E+00 -1.2255E-01 -7.3238E-01 4.7129E-01 18 4.1222E+00 -8.1432E+00 -3.4578E-01 2.1711E+00 19 6.1880E+00 -3.6179E+00 1.0918E+00 5.2484E-01 20 -1.4860E+01 -2.1600E+01 -3.6051E+00 1.4900E+00 Lateral Cyclic Load, Spider Arm Load, lb ib MEAN -3.1363E+02 -1.3287E+02 1/2PP 3.4855E+02 6.5259E+02 Nth COSINE SINE COSINE SINE 01 -2.8928E+00 -6.4883E-01 2.0971E+02 1.8342E+02 02 4.2794E+00 -1.1109E+01 6.6132E+01 9.0316E+01 03 5.2814E+00 -7.1851E+00 -6.9024E+01 8.9772E+01 04 2.1173E+02 -2.1980E+02 -1.0951E+02 -2.9875E+01 05 2.8586E+00 1.6913E+01 -1.7528E+02 1.3180E+02 06 7.6042E-02 2.1654E+01 1.8947E+02 1.6300E+02 07 7.2207E+00 -5.3140E-02 2.6180E+01 2.4511E+01 08 -2.6675E+01 -3.7130E+01 1.3082E+01 9.5526E+00 09 1.6419E+00 -7.3713E+00 -5.2233E+00 -5.1847E+00 10 -6.1245E+00 -3.6604E+00 9.8919E+00 1.4927E+01 11 -6.5255E-01 -1.9229E+00 9.9660E+00 9.6329E-01 12 -1.6215E-01 -2.2843E+00 2.7513E+00 -1.4221E+00 13 4.4484E+00 -2.6338E-01 9.5018E-01 -1.7701E+01 14 -2.2908E+00 -4.0633E+00 -1.8033E+01 1.1571E+01 15 -2.6545E+00 2.9934E+00 -3.6422E+00 2.7408E+00 16 1.1988E+01 5.5868E+00 1.2643E+00 2.4936E+00 17 -6.4375E-01 2.1047E+00 2.0647E+00 -4.4732E-01 18 8.1477E-01 -1.4134E-01 -1.3827E+00 8.9711E-01 19 -1.5357E+00 -7.5195E-01 -5.0429E-01 1.4899E-01 20 2.1696E-01 1.3496E+00 1.9969E+00 2.8003E+00 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.8544E+01 5.4833E+02 1.4228E+03 I/2PP 8.0869E+00 COSINE SINE Nth COSINE SINE 4.0881E+02 1.3356E+03 01 1.5405E+00 -7.4776E+00 2.1628E+02 -7.4856E+01 02 7.4884E-01 7.7820E-01 -3.0718E+01 5.0289E+01 03 1.1855E-01 -7.0057E-02 2.4361E+01 2.4290E+01 04 -4.7918E-01 -6.9917E-02 -2.1425E+01 1.8991E+01 05 -7.4384E-01 6.3043E-01 1.5539E+01 2.7902E+01 06 2.6287E-01 3.4268E-01 -4.4289E-01 4.0762E+01 07 8.2406E-02 6.2786E-02 -1.9466E+01 1.3348E+00 08 3.4879E-02 4.9136E-02 4.5751E+00 09 -4.0712E-02 -8.9139E-03 1.9918E+01 -1.8188E+01 -1.5598E+01 10 5.8767E-02 1.0493E-01 -1.8800E+01 1.3916E+01 11 5.1902E-02 5.1543E-02 -2.3959E+00 -1.4484E+01 12 2.2278E-02 2.2129E-02 13 9.4278E-03 -1.6783E-02 -1.0376E+01 -1.2396E+00 14 4.8637E-03 -1.6466E-02 6.0410E+00 2.1421E+00 -1.5670E+00 -1.1355E+01 15 -1.5506E-02 -1.8861E-03 7.5268E+00 -4.8905E+00 16 5.5350E-03 6.7704E-03 8.3119E-01 1.2540E+00 17 1.1066E-02 2.3867E-02 -8.9026E+00 -9.0557E+00 18 3.2932E-03 1.3301E-02 2.8093E+00 -4.0189E+00 19 -3.8666E-03 2.0072E-03 20 -1.2712E-02 -2.7611E-03 1.2416E+00 -7.2917E+00 MR Shaft Torque, in-lb MEAN 2.3762E+05 1/2PP 2.2245E+04 Nth COSINE SINE 01 8 .0396E+02 5.5665E+02 02 1 .4337E+04 1.0055E+04 03 8 .9950E+01 3.1534E+02 04 -5 .6762E+02 1.1627E+03 -8.7359E+02 05 5 .2020E+02 06 -4 .6343E+02 4.0041E+03 -2.0163E+02 07 -2 .3036E+02 08 1 .1474E+03 1.4804E+03 09 -9 .2728E+01 4.4452E+01 .7106E+02 -2.0520E+02 i0 5 .2704E+02 4.8057E+01 11 -1 12 3 2.7011E+02 .2929E+02 13 5 .5741E+01 -7.3942E+01 14 7 .7274E+01 -3.8256E+02 15 -1 .6512E+00 -2.5840E+01 .2360E+02 -4.6322E+01 16 -3 17 -6 6.1561E+01 .3284E+00 18 -8 .3538E+01 5.7780E+01 19 4 .2557E+01 5.6030E+00 20 -I .2033E+02 1.4299E+01 Flight 497, Condition I Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 2.2669E+04 9.1022E+03 I/2PP 3.3217E+04 3.5520E+04 Nth COSINE SINE COSINE SINE 01 -5.2843E+03 3.4648E+03 -I .6604E+04 2.2893E+04 02 -1.4049E+04 -7.9506E+03 2 .3512E+03 1.2321E+03 03 4.2076E+03 -1.2328E+04 3 .6304E+03 -3.1537E+03 04 2.2300E+03 3.7255E+03 -3 .6292E+02 1.5078E+02 05 -3.0425E+03 2.2917E+03 -1 .6490E+03 2.4026E+03 06 9.4202E+01 -1.3404E+03 6 .0929E+02 1.2028E+03 07 -1.0462E+03 2.8745E+02 1 .0065E+02 -7.0538E+01 08 7.0405E+02 6.3236E+02 3 .6378E+01 -2.5111E+01 09 -3.8151E+02 1.2406E+02 -3 .1390E+02 -8.9505E+02 10 -9.5109E+01 -2.9597E+02 -1 .8098E+02 1.2368E+03 11 -1.3476E+02 -1.2828E+01 2 .6655E+02 3.1099E+02 12 -2.0014E+02 2.6512E+02 1 .0277E+02 -1.9124E+02 13 -5.2636E+01 5.6995E+01 -4 .0867E+01 1.5428E+01 14 9.6855E+00 4.5170E+01 -6 .3308E+01 2.4109E+01 15 1.3942E+01 1.1399E+01 -3 .9527E+01 -2.3176E+00 16 1.9076E+01 -1.6266E+01 2 .7506E+01 1.7734E+01 17 7.9626E+01 1.9538E+01 -5 .0830E+00 -6.9996E+01 18 6.461iE+00 3.0541E+01 3 .2576E-01 6.1260E+01 19 7.4686E+00 1.3996E+01 4 .8104E+01 2.2404E+01 20 2.5457E+01 -2.5715E+00 -1 .4582E+01 -4.0622E+01 Flat.Bending @14.2%R, Edg. Bending @14.2%R, in-lb in-lb MEAN 1.7094E+04 8.2607E+03 I/2PP 6.0182E+03 1.6261E+04 Nth COSINE SINE COSINE SINE 01 -1.3696E+03 5.6864E+02 -1. 1760E+04 1.0246E+04 02 -3.7193E+03 -9.5816E+02 5. 5064E+02 8.6674E+02 03 6.7224E+02 -1.6264E+03 1. 2031E+03 -2.1171E+03 04 7.3811E+01 -1.6368E+02 -2. 1499E+02 -2.1580E+02 05 9.0686E+02 -1.9639E+02 -2. 9506E+02 7.9925E+02 06 -1.5114E+02 9.8527E+01 1. 2088E+02 2.8520E+02 07 5.3932E+02 -1.2609E+02 -I. 8982E+00 -9.3595E+01 08 -4.3240E+02 -3.8556E+02 -3. 8001E+01 -1.9639E+02 09 3.8263E+01 -7.2326E+01 -3. 3370E+01 -1.2139E+02 10 4.9227E+01 1.5037E+02 3. 0567E+01 1.6618E+02 11 1.3887E+02 -4.3705E+01 5. 5008E+01 -4.9691E+00 12 1.9692E+02 -1.4348E+02 6. 0695E+01 -4.4144E+01 13 6.8853E+00 -3.1328E+01 1. 9682E+01 1.4430E+01 14 3.2374E+01 -2.7787E+01 -9. 1834E+00 5.6655E+00 15 7.7597E+00 -1.2862E+01 1. 6781E+01 3.3006E+01 16 1.4308E+01 1.6179E+01 1. 0263E+01 2.3629E+01 17 -6.9794E+01 -2.8570E+01 -1. 4657E+01 -6.1002E+00 18 -1.0348E+01 -2.5086E+01 2.

5725E+00 -5.8367E+00 19 4.8497E+00 -7.5120E+00 -9. 2261E-01 4.1373E-02 20 -4.2659E+00 -8.8933E+00 -3. 5114E+00 -6.6649E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb 4.4491E+03 MEAN 1.7090E+04 1.1994E+04 1/2PP 5.3727E+03 COSINE SINE Nth COSINE SINE -7.5829E+03 8.7712E+03 01 -1.5313E+03 9.9787E+02 1.2023E+03 3.2955E+02 02 -1.6023E+03 1.0362E+02 -3.2271E+02 -1.3556E+03 03 -3.4183E+02 1.1825E+03 -3.3908E+02 -3.5311E+02 04 -3.8310E+02 -1.0745E+03 -5.2802E+01 7.6203E+01 05 2.1487E+03 -9.5245E+02 6.9454E+01 -6.4652E+01 06 -4.3055E+02 1.9208E+02 -2.6517E+02 1.1740E+02 07 7.3307E+02 -1.9244E+02 1.7732E+01 -4.2758E+01 08 -5.7381E+02 -5.1093E+02 1.4840E+02 2.8201E+02 09 2.6672E+02 -4.5175E+01 3.2791E+01 -4.4322E+02 10 7.6554E+01 5.4332E+01 -1.4487E+02 -7.2425E+01 11 7.6742E+00 -5.5298E+01 -3.2586E-01 2.5238E+01 12 1.1958E+02 -1.4444E+02 6.2627E+00 2.0953E-01 13 1.2125E+00 3.1097E+00 14 3.2086E+01 -1.0188E+01 2.6380E+01 -1.2306E+01 15 2.3916E+01 8.3858E+00 1.3296E+01 -7.4772E+00 16 1.8796E+01 1.6897E+00 9.6377E+00 -4.6210E+00 17 -1.2184E+01 -1.0687E+00 1.1377E+01 1.9146E+01 18 3.2577E+00 -3.4987E+00 -1.1516E+00 -3.5818E+01 19 -8.7067E-01 1.2469E+01 -1.7578E+01 -5.5436E+00 20 -1.8314E+00 2.6706E+00 5.4395E+00 3.3485E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb -1.5853E+03 MEAN 1.2265E+04 1.2162E+04 1/2PP 5.5022E+03 COSINE SINE Nth COSINE SINE -5.8014E+03 9.7027E+03 01 3.1258E+02 -1.5062E+02 1.4648E+03 -3.8720E+02 02 -6.1994E+02 9.1631E+02 -1.9689E+03 -1.0662E+03 03 -9.6972E+02 2.5313E+03 04 -4.2689E+02 -1.2982E+03 -2.9220E+02 -5.3850E+02 05 2.0355E+03 -1.2565E+03 6.6749E+02 -1.0093E+03 06 -4.1518E+02 3.6487E+01 -8.5125E+01 -4.4355E+02 -3.0479E+02 2.1567E+02 07 2.6747E+02 -1.6895E+02 -1.8919E+01 1.7963E+02 08 -2.1839E+02 -4.7951E+01 2.2879E+02 4.1384E+02 09 1.8772E+02 2.2292E-01 10 1.5990E+01 -1.4002E+02 2.4596E+01 -6.1460E+02 11 -1.3569E+02 4.0416E+00 -1.8842E+02 -7.3485E+01 -3.1084E+01 4.6418E+01 12 -1.4152E+02 4.4769E+01 -2.7860E+01 -2.9632E+01 13 -8.8394E+00 4.2815E+01 3.9839E+01 -2.4532E+01 14 -1.7884E+01 3.3732E+01 -3.2454E+01 -5.1081E+01 15 -1.4574E+00 6.0897E+00 -2.7658E+01 -4.3809E+01 16 -1.3726E+01 -1.2275E+01 -1.3861E+01 -1.0866E+01 17 4.9828E+01 2.5621E+01 -1.1966E+00 1.6994E+01 18 2.7209E+00 2.2318E+01 3.5784E+00 2.5886E+00 19 -1.2385E+00 4.0995E+00 8.4092E+00 2.8840E+00 20 1.3527E-01 6.0728E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 5.0335E+03 -1.4186E+03 I/2PP 5.7594E+03 9.7093E+03 Nth COSINE SINE COSINE SINE 01 1.6212E+03 -1.9011E+03 -4.1064E+03 6.1674E+03 02 -1.3088E+03 9.2490E+02 1.2443E+03 -6.4509E+02 03 -6.3975E+02 2.1696E+03 -2.9862E+03 -2.6822E+02 04 -2.2358E+02 -5.2764E+02 -_.8388E+02 -4.6705E+02 05 4.0463E+02 -2.6818E+02 1.1173E+03 -1.8765E+03 06 -8.5923E+01 -2.3379E+02 -1.8794E+02 -6.6439E+02 07 -3.8532E+02 -7.9654E-01 -1.9063E+02 1.5749E+02 08 4.1949E+02 3.1527E+02 1.2086E+02 4.9060E+02 09 -1.7405E+02 3.7438E+01 1.1068E+01 -1.0315E+02 10 -8.2933E+01 -1.7553E+01 -1.8020E+01 1.8895E+02 11 6.6896E+01 3.4810E+01 5.5122E+01 3.9256E+01 12 1.0211E+01 9.1405E+01 -4.1149E+01 1.8742E+01 13 1.3712E+01 -1.6800E+01 -5.1468E+01 -1.2047E+01 14 -1.6239E+00 -1.6289E+01 -2.0971E+00 -7.1600E+00 15 1.7797E+00 1.5777E+00 -7.0139E+01 -3.4312E+01 16 1.3266E+00 2.0369E+01 -5.3617E+01 -3.5476E+01 17 -3.7583E+01 -1.1292E+01 -5.5977E+01 -6.1608E+01 18 -7.5016E-01 -1.3358E+01 -5.1419E+00 8.6055E+01 19 9.8446E-01 8.8019E+00 3.4717E+01 1.7129E+01 20 -4.9868E+00 2.0031E+00 -4.2861E+00 -6.2576E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -1.5812E+02 -5.0481E+03 I/2PP 5.4548E+03 7.5523E+03 Nth COSINE SINE COSINE SINE 01 1.7628E+03 -2.1233E+03 -2.6490E+03 3.1405E+03 02 -2.7640E+03 4.0332E+02 1.0369E+03 -5.2329E+02 03 -4.1743E+02 8.5366E+02 -2.4471E+03 -7.0304E+01 04 4.9608E+01 8.6799E+02 -9.7840E+01 -1.2387E+02 05 -1.1612E+03 4.4262E+02 6.8748E+02 -1.7214E+03 06 3.4344E+02 7.4964E+01 -2.0928E+02 -5.2152E+02 07 -2.3608E+02 1.1452E+02 -7.6453E+00 6.2648E+01 08 7.5186E+01 -1.0560E+01 8.1819E+01 3.6801E+02 09 -1.0891E+01 1.9537E+01 -7.7725E+01 -5.0574E+02 10 -1.0221E+00 1.2208E+02 -1.0749E+01 6.8862E+02 11 4.6876E+01 -2.6742E+01 2.2559E+02 8.0982E+01 12 9.7405E+01 -1.1421E+02 2.2160E+01 -5.4115E+01 13 -9.3145E+00 -1.8333E+01 4.8289E+01 2.0695E+01 14 8.0157E+00 -2.2733E+00 -3.9040E+01 7.9139E+00 15 1.5128E+00 -4.5336E+00 3.2117E+01 3.8142E+01 16 1.2294E+01 -1.4592E+01 1.4098E+01 4.3851E+01 17 2.0205E+01 6.8126E+00 2.2034E+01 1.8939E+01 18 -2.4829E+00 4.4225E+00 -2.3517E-01 -1.0342E+01 19 1.1856E+00 -6.3978E+00 -7.0815E+00 -4.4016E+00 20 5.4327E+00 -2.0765E+00 2.1623E+00 -6.1531E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb -5.9185E+03 MEAN -4.1429E+03 3.6346E+03 I/2PP 4.9552E+03 COSINE SINE Nth COSINE SINE 6466E+02 6.8182E+02 01 1.0058E+02 -8.1280E+02 -9.

2095E+02 -3.4368E+02 02 -3.4644E+03 -2.3011E+02 2.

0650E+03 -3.4762E+02 03 -3.6192E+02 -1.0238E+02 -1.

04 5.9369E+02 1.0989E+03 1. 6746E+02 2.9017E+02 05 -1.1352E+03 8.4029E+02 1. 8240E+02 -6.5919E+02 06 -1.0143E+02 -2.7690E+01 -4. 2298E+01 -2.4853E+02 8774E+02 -3.7702E+01 07 4.2178E+02 1.0637E+01 1.

4324E+01 1.0004E+02 08 -3.2772E+02 -2.4800E+02 -3.

2446E+01 -4.6991E+02 09 8.3557E+01 -1.2661E+01 -1.

i0 2.4429E+01 -1.2254E+02 -2. 3520E+01 4.6428E+02 11 -4.2459E+01 1.1919E+01 1. 3105E+02 5.6200E+01 12 -8.2409E+01 7.5940E+01 -8. 2476E+00 -1.1609E+00 13 -8.3656E-01 1.2414E+01 7. 5870E+01 5.4160E+01 7932E+00 2.0078E+01 14 2.3881E+00 2.8332E+00 -4.

15 4.8337E-01 6.4229E+00 7. 3291E+01 5.4279E+01 16 -1.0038E+01 4.4127E+00 5. 3680E+01 5.5144E+01 17 -9.7235E+00 -2.3942E+00 5. 1239E+01 4.8152E+01 18 3.0641E+00 -1.0203E-01 -6. 1426E+00 -8.8143E+01 19 -1.1490E+00 6.5158E+00 -4. 1435E+01 -1.5293E+01 20 -4.0280E+00 1.7626E+00 4. 5051E+00 4.5041E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -2.5306E+03 1.7144E+02 1/2PP 1.8791E+03 2.7063E+02 Nth COSINE SINE COSINE SINE 01 6.3324E+00 -5.3456E+01 2.5037E+00 1.1224E+01 02 -8.4630E+01 4.4304E+01 1.8572E+00 -8.4087E-01 03 -3.6697E+01 7.4095E+01 -8.1656E+00 -6.8729E+00 04 -1.3103E+03 -9.1133E+02 7.0947E+01 2.1204E+02 05 -1.3670E+01 -1.6560E+02 -6.1234E+00 1.2644E+01 06 -1.4878E+02 -4.2769E+01 2.1945E+01 2.4374E+00 07 -3.1553E+01 1.3308E+01 3.4252E+00 -3.6343E+00 08 -4.3106E+01 8.2620E+01 -2.9970E+01 2.8570E+01 09 -6.0726E-02 -1.7125E+01 -4.1664E+00 -1.6758E+00 10 -3.6742E+01 4.9621E+00 5.3533E+00 1.8704E+00 11 -1.4868E+01 7.0399E+00 -3.5816E-01 5.5685E-01 12 2.2596E+02 1.0146E+02 -2.2134E+01 -8.7865E+00 13 -I.0338E+01 5.5399E+00 5.8065E-01 -1.3439E+00 14 4.1045E+00 -4.7423E+00 -4.1239E-01 1.5876E+00 15 4.1002E+00 -1.7339E+00 1.9369E-01 6.1736E-01 16 1.6543E+01 -2.6298E+01 1.8510E+00 1.6807E+00 17 2.4267E+00 1.4214E+00 -1.3720E+00 1.1457E-01 18 1.0768E+01 -3.5926E+00 -8.0987E-01 2.1921E+00 19 7.4366E+00 2.1387E+00 6.1190E-01 1.1190E+00 20 3.0386E-01 -2.8335E+01 -8.4261E+00 -1.8843E+00 Lateral Cyclic Load, Spider Arm Load, ib ib -3.0838E+02 -1.5399E+02 4.0913E+02 6.9238E+02 Nth COSINE SINE COSINE SINE 01 -3.7961E+00 1.2685E+00 2.0819E+02 2.0173E+02 02 3.5949E+00 -6.5655E+00 7.1582E+01 9.7000E+01 03 6.4002E+00 -9.9749E+00 -8.7016E+01 8.6382E+01 04 2.9478E+02 -1.8904E+02 -1.1607E+02 -8.5123E+01 05 2.3860E+00 2.0614E+01 -2.2219E+02 9.8490E+01 06 -4.5620E+00 2.5055E+01 1.6052E+02 1.8424E+02 07 8.0246E+00 2.5324E+00 1.7914E+01 1.3194E+01 08 -3.2171E+01 -2.7138E+01 9.4008E+00 7.1773E+00 09 3.3439E+00 -7.4412E+00 -I.0988E+01 -5.6175E+00 10 -5.0203E+00 -7.0594E+00 1.0431E+01 1.8410E+01 11 8.4143E-01 -5.3981E-01 1.3377E+01 1.6859E+00 12 -1.4696E+01 -2.1710E+00 1.6761E+00 -3.1437E+00 13 5.1910E+00 2.6406E+00 7.9440E+00 -1.8267E+01 14 -8.8898E-01 -3.0449E+00 -1.4309E+01 -1.4902E+00 15 -2.7919E+00 1.1010E+00 -4.8799E+00 1.4611E+00 16 8.1753E+00 3.8012E+00 -8.5640E-01 2.3796E+00 17 -6.5762E-01 6.6671E-01 1.6814E+00 1.6502E-01 18 4.4632E-01 1.0497E+00 -1.3827E-01 -6.9645E-01 19 -9.5188E-01 -1.9795E+00 -5.8053E-01 4.3464E-01 20 3.4760E+00 5.4749E+00 2.6850E-01 3.2953E+00 Blade Feathering Lag Damper Load, Ib Angle, deg MEAN 1.8358E+01 5.4963E+02 1/2PP 8.0438E+00 1.4206E+03 Nth COSINE SINE COSINE SINE 01 1.7885E+00 -7.4360E+00 4.5811E+02 1.3218E+03 02 7.5547E-01 7.8973E-01 2.0680E+02 -1.0189E+02 03 7.8629E-02 -1.0673E-01 -1.1774E+01 3.6026E+01 04 -4.7558E-01 -1.9795E-01 1.6884E+01 1.6829E+01 05 -8.1672E-01 4.6169E-01 -1.8480E+01 4.1364E+00 06 1.9201E-01 3.1402E-01 2.0717E+01 2.7986E+01 07 3.1885E-02 3.1190E-02 -1.3514E+01 3.9165E+01 08 1.7244E-02 5.2566E-02 -1.5776E+01 7.0194E+00 09 -2.5383E-02 -3.2109E-02 1.8829E+01 1.7625E+01 10 -1.4169E-03 1.0021E-01 -9.1582E+00 -2.0435E+01 11 3.1818E-02 5.8879E-02 -1.3067E+01 1.3568E+01 12 2.2218E-02 1.7963E-02 5.1028E+00 -2.2009E+01 13 8.5174E-03 -2.2596E-02 -8.5936E+00 -1.7604E+00 14 6.5686E-03 -2.0911E-02 3.7517E+00 -3.1430E+00 15 -1.5704E-02 -9.1501E-05 1.7133E+00 -8.9182E+00 16 -4.5068E-03 1.0147E-02 7.4731E+00 -6.7453E-01 17 -1.3439E-03 1.9116E-02 4.0522E+00 1.5044E-01 18 2.0616E-03 9.4084E-03 -1.6128E+00 -4.7208E+00 19 -5.3547E-03 7.5835E-03 1.1773E+00 7.1871E-01 20 -1.1085E-02 -7.0868E-03 -7.4019E-02 -4.1726E+00 MR Shaft Torque, in-lb 2.3314E+05 1/2PP 2.4581E+04 Nth COSINE SINE 01 7.9030E+02 1.2647E+03 02 1.4851E+04 1.1530E+04 03 1.2864E+02 3.3177E+02 04 1.1744E+03 1.1957E+03 05 6.4622E+02 -6.8002E+02 06 -7.9641E+02 4.3301E+03 07 5.1294E+01 -1.9889E+02 08 1.1707E+03 1.5225E+03 09 -1.1028E+02 -5.5854E+01 10 9.5666E+02 -2.4554E+02 11 -2.2316E+01 -8.8199E+01 12 3.6971E+02 5.7673E+02 13 1.0472E+02 -2.9855E+01 14 3.1214E+02 -4.7030E+02 15 -3.8212E+01 -6.4730E+01 16 -2.2476E+02 -2.4734E+02 17 -2.4802E+01 2.3282E+01 18 -1.1711E+02 -6.5472E+01 19 8.7188E+00 -2.7369E+01 20 -1.8858E+01 -7.4706E+01 Flight 499, Condition B Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 1.4565E+04 -1.3792E+04 1.5837E+04 I/2PP 7.7867E+03 Nth COSINE SINE COSINE SINE 01 3.5737E+03 -2.0823E+02 -1.4030E+04 5.2021E+03 02 6.9837E+02 1.4549E+03 7.6163E+02 9.7405E+02 03 1.0855E+03 -1.4987E+03 2.0929E+03 -2.2439E+02 04 6.0464E+02 7.0345E+02 1.3485E+00 1.0428E+02 05 -6.5283E+02 -9.9364E÷02 7.5054E+02 -3.9660E+02 06 6.8811E+02 -4.7654E+02 1.8689E+02 -1.7528E+02 07 7.7886E+02 -2.3760E+02 -1.1533E+02 -7.3486E+01 08 3.7802E+02 1.0711E+02 -3.3807E+01 1.8043E+01 09 2.6330E+02 -9.5489E+01 1.9595E+01 4.1533E+02 10 -1.8753E+01 -5.7785E-01 1.2144E+01 -1.5903E÷02 11 -1.4587E+02 -3.7371E+01 -2.9235E+02 -1.1073E+02 12 3.4455E+01 -3.3939E+02 -1.2489E+02 3.6417E+01 13 -1.7407E+01 -1.4247E+01 4.4451E+00 -5.0363E+01 14 -2.4232E+01 -4.5527E+01 -2.1485E+01 -3.5140E+01 15 3.4651E+01 -3.1922E+01 1.6986E+00 1.9379E+01 16 1.1081E+02 6.1939E+01 -1.4975E+01 -8.8561E+00 17 -1.0969E+02 2.6250E+01 1.1098E+02 -6.2789E+01 18 3.4126E+01 -2.7893E+01 5.6595E+01 -3.6934E+01 19 2.9884E+01 3.1789E+01 3.0079E+01 3.8277E+01 20 -6.9221E+00 4.8063E+01 1.3519E+01 -1.5090E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.5166E+04 -3.9554E+03 I/2PP 2.7663E+03 5.4251E+03 Nth COSINE SINE COSINE SINE 01 1.7885E+03 -1.9515E+02 -5.3026E+03 3.8004E+02 02 -6.1441E+01 5.7044E+02 2.9346E+02 5.5690E+02 03 -3.2769E+01 -6.9501E+01 4.7594E+02 4.9874E+01 04 2.2312E+01 -5.3577E+01 9.9793E+01 -6.7234E+01 05 1.1763E+02 3.5744E+02 2.7112E+02 -6.6061E+01 06 -1.9732E+02 1.4574E+02 -3.3161E-01 -3.9287E+01 07 -4.2984E+02 7.1024E+01 -1.4481E+01 -5.3001E+01 08 -2.0541E+02 -3.9044E+01 -6.0552E+01 -5.2922E+00 09 -7.5825E+01 -6.5010E+00 -7.2130E+00 5.9893E+01 10 1.0078E+01 -1.7124E+01 2.2740E+01 -4.3566E+01 11 1.3690E+02 1.1783E+02 -5.3598E+01 -6.3435E+00 12 -2.1683E+01 2.5651E+02 -5.4627E+01 4.7111E+01 13 2.4046E+01 3.1371E+01 -9.1703E+00 3.8112E+00 14 5.1169E+01 3.2918E+01 -7.1586E+00 1.2766E+01 15 -3.1476E+01 2.6125E+01 2.0847E+00 -2.0315E+00 16 -1.0854E+02 -3.8727E+01 -1.4675E+01 -2.0752E+01 17 1.0887E+02 -2.2656E+01 1.8407E+01 5.5094E+00 18 -3.5591E+01 4.8155E+01 -4.4460E+00 1.7756E+00 19 -4.2204E+01 -3.6968E+01 -8.9763E+00 2.8211E+00 20 7.7113E+00 -4.9373E+01 2.4096E-02 -5.6301E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb -3.1322E+03 MEAN 1.4409E+04 5.0607E+03 1/2PP 2.0907E+03 COSINE SINE Nth COSINE SINE 9115E+03 1.3045E+03 01 5.2288E+02 -3.4832E+02 -4.

0606E+02 2.3688E+02 02 -2.6968E+02 1.9570E+02 4.

0582E+02 -2.6989E+02 03 -3.1358E+02 2.4401E+02 1.

2274E+02 -2.8580E+02 04 -1.6602E+02 -2.8621E+02 1.

2080E+01 -6.3551E+01 05 3.0117E+02 6.7031E+02 -7.

6194E+00 -9.1582E+00 06 -3.9094E+02 2.7388E+02 -3.

7275E+02 -8.6312E+01 07 -5.9739E+02 1.0451E+02 1.

6815E+00 1.0325E+01 08 -2.8260E+02 -7.1650E+01 -9.

9423E+00 -1.7790E+02 09 -1.5346E+02 8.7368E+00 -1.

0539E+01 5.9676E+01 10 1.4315E+01 -9.3672E-01 -2.

0836E+02 2.9413E+01 11 1.0412E+02 6.0392E+01 1.

6800E+00 7.6434E+00 12 2.0234E+01 2.2298E+02 9.

6963E+00 1.2972E+01 13 -5.9106E-01 2.6198E+01 -7.

9355E+00 6.5512E+00 14 3.9320E+01 9.3616E+00 8.

1684E-01 2.1465E+00 15 -2.2569E+01 1.0625E+01 6.

8027E+00 -1.2836E+00 16 -4.1227E+01 -1.0324E+01 -2.

17 8.9126E+00 -2.3138E+01 -3. 9070E+01 2.6096E+01 18 -4.6302E+00 1.2223E+01 -2. 4755E+01 2.6455E+01 0221E+01 -1.9010E+01 19 -1.3949E+01 -4.0620E+00 -1.

9692E+00 9.9522E-01 20 2.3928E+00 2.0663E+00 -3.

Edg.Bending @31%R, Flat.Bending @31%R, in-lb in-lb MEAN 1.0307E+04 -7.4999E+03 I/2PP 2.2123E+03 6.4953E+03 Nth COSINE SINE COSINE SINE 01 -1.5154E+02 -8.4894E+02 -5.3427E+03 2.4286E+03 02 -7.4031E+02 -1.9617E+02 6.9468E+02 1.3890E+02 03 -5.5402E+02 2.7387E+02 -2.7025E+02 -6.5415E+02 04 -2.9353E+02 -3.7769E+02 1.7853E+02 -5.1425E+02 05 3.1595E+02 5.2976E+02 -4.7431E+02 2.7217E+01 06 -2.3006E+02 2.1001E+02 -7.8826E+01 7.5033E+01 07 -2.1846E+02 7.8048E+01 1.1046E+02 -1.4237E+00 08 -7.0984E+01 9.3658E+00 2.3910E+01 -6.9201E+00 09 -6.0007E+01 3.6627E+01 1.0336E+01 -2.6242E+02 10 -8.0781E+00 1.6761E-01 -5.5451E+01 1.1378E+02 11 -3.9945E+01 -9.9260E+01 2.1187E+02 7.9555E+01 12 6.7540E+01 -1.2109E+02 9.3192E+01 -7.0850E+00 13 -1.6176E+01 -1.6561E+01 1.1450E+01 1.0235E+01 14 -1.2257E+01 -4.2368E+01 2.4974E+01 -5.6164E-04 15 3.4475E+01 -2.0527E+01 -1.6878E+01 4.5170E+00 16 8.7233E+01 4.5324E+01 -I.0961E+01 2.5880E+01 17 -8.9685E+01 1.4393E+01 2.2521E+01 -2.7013E+01 18 3.6290E+01 -4.1109E+01 7.0255E+00 -4.1415E+00 19 3.5508E+01 2.7313E+01 9.2962E+00 -2.3929E+00 20 -6.5353E+00 3.5657E+01 2.3211E+00 -2.1840E+00 Edg.Bending @48%R, Flat.Bending @48%R, in-lb in-lb MEAN 4.0054E+03 -4.3624E+03 I/2PP 2.8573E+03 5.0902E+03 Nth COSINE SINE COSINE SINE -3.1252E+03 1.3036E+03 01 -1.5992E+02 -1.4154E+03 02 -1.3387E+03 -2.3566E+02 7.3303E+02 -1.3683E+02 03 -6.4934E+02 4.9758E+02 -8.1093E+02 -6.4590E+02 04 -1.9789E+02 -7.2796B+01 1.3830E+02 -4.6886E+02 05 5.3717E+00 -1.8119E+00 -8.3489E+02 6.1615E+01 06 1.6149E+02 -4.6938E+01 -8.9319E+01 7.3637E+01 07 3.8944E+02 -3.2974E+01 -1.9962E+02 1.3746E+02 9.5824E+01 -2.8725E+01 08 1.9556E+02 2.0064E+01 09 1.1469E+02 -3.3246E+01 3.0869E+01 6.6902E+01 10 1.8105E+01 2.4399E+01 -3.5538E+00 -1.5325E+01 11 -6.4894E+01 2.2169E+01 6.7078E+00 1.5062E+01 12 -5.4217E+01 -9.1510E+01 7.9194E+01 -1.9784E+01 13 8.2240E+00 -2.1128E+01 4.7887E+01 -7.7403E+00 14 -1.9166E+01 3.5232E+01 2.0255E+01 -1.9379E+01 15 -3.7934E+01 1.1995E+01 -1.5484E+01 -1.0946E+01 16 -6.0056E+01 -5.1203E+01 -1.9393E+01 1.6691E+01 17 6.8959E+01 -2.2207E+01 1.4915E+02 -5.8478E+01 18 -3.2662E+01 3.1257E+01 7.1978E+01 -4.8196E+01 19 -3.8420E+01 -1.6858E+01 1.5422E+01 4.0767E+01 20 4.1645E+00 -2.9646E+01 1.4117E+01 -1.1270E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -2.5453E+02 -7.3822E+03 1/2PP 3.3651E+03 3.9305E+03 Nth COSINE SINE COSINE SINE 01 -2.1364E+02 -1.1680E+03 -1.7410E+03 4.9052E+02 02 -1.6067E+03 -1.6511E+02 4.9411E+02 -2.5558E+02 03 -7.8359E+02 5.7071E+02 -8.4595E+02 -4.5492E+02 04 3.5259E+01 2.3070E+02 3.2492E+01 -3.1309E+02 05 -1.2073E+02 -2.9219E+02 -7.5968E+02 7.8487E+01 06 1.0705E+02 -1.1156E+02 2.3566E+01 2.6934E+01 07 8.0487E+01 3.7472E+00 -3.2543E+02 1.3578E+02 08 2.4873E+01 3.0292E+01 2.8281E+01 -7.2845E+01 09 -2.3281E+01 -2.2005E+01 -2.9424E+00 2.8749E+02 10 -3.1174E+01 5.1763E-01 5.5232E+01 -1.2444E+02 11 7.8965E+01 1.0940E+02 -1.3567E+02 -5.9271E+01 12 -5.2653E+00 2.0468E+02 -3.8003E+01 5.2010E+01 13 2.1278E+00 1°8926E+01 2.2307E+00 -5.7939E-01 14 3.0578E+01 -1.0138E+01 -5.4232E+00 -4.2691E+00 15 1.9281E+01 -2.3521E+00 1.1244E+01 -2.4713E+00 16 2.1835E+01 3.2489E+01 7.5555E+00 -9.2319E+00 17 -4.3527E+01 1.7442E+01 -3.2836E+01 2°1457E+01 18 1.6461E+01 -1.2799E+01 -1.3820E+01 6.8534E+00 19 2.6712E+01 7.6109E+00 -4.4689E+00 -1.0210E+01 20 -1.7420E+00 2.4999E+01 -2.6398E+00 4.5183E+00 Edg.Bending @81%R, Flat.Bending @81%R, in-lb in-lb -3.4633E+03 -7.0682E+03 3.3337E+03 2.3398E+03 Nth COSINE SINE COSINE SINE 01 -6. 8589E+00 -1.7661E+02 -7.0659E+02 -1.0047E+02 02 -i. 5144E+03 -2.3448E+01 9.8254E+01 -1.1811E+02 03 -9. 3117E+02 6.0517E+02 -5.4995E+02 -2.0376E+02 04 2. 0434E+02 3.1761E+02 -1.2680E+00 -1.0138E+02 05 4. 0192E+01 -2.2577E+02 -3.5762E+02 -1.0560E+01 06 i. 0614E+01 -1.6058E+01 4.5255E+01 -1.1769E+01 07 -3. 7047E+02 -1.5287E+01 -3.4983E+02 4.9935E+01 08 -2. 3554E+02 -5.3384E+01 -8.2782E+01 -6.4860E+01 09 -6. 2673E+01 4.0388E+01 -5.6270E+01 2.3826E+02 10 3. 1820E+01 -6.7518E+00 6.7833E+01 -9.0778E+01 11 -4. 3742E+01 -1.2392E+02 -1.3216E+02 -1.1314E+02 12 -4. 0299E-01 -1.4898E+02 -5.8034E+01 -2.9007E+01 13 -2. 3420E+01 2.0691E+01 -4.3327E+01 -3.0939E-01 14 -2. 9084E+01 7.9028E+00 -3.6969E+01 2.4119E+01 15 2. 9145E+00 -1.8561E+01 3.0180E+01 1.3532E+01 16 -3. 5942E+00 -9.1375E+00 2.5415E+01 -2.8180E+01 17 9. 5424E+00 8.7689E+00 -1.4122E+02 6.4554E+01 0467E+01 6.1151E+00 -8.4300E+01 5.9934E+01 18 -1.

19 -4. 2838E+00 -1.1816E+01 -2.3605E+01 -3.7698E+01 20 2. 6873E+00 -7.6550E+00 -6.1450E+00 1.2616E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -7.4213E+02 1.8339E+01 I/2PP 2.4607E+02 3.0678E+01 Nth COSINE SINE COSINE SINE 01 -3. 2941E+00 -1.5857E+01 -9.0495E-01 2.6803E+00 02 -2. 6816E+01 -1.1237E+01 1.0119E+00 4.3430E+00 8.1157E-01 -1.0596E+00 03 -1. 3537E+01 5.6326E+00 04 1. 4538E+02 -5.5691E+00 -1.7760E+01 1.0779E+01 05 1. -1.6650E-01 -1.3168E+00 5142E+01 2.1301E+01 2.8929E-01 3.4414E-01 06 1. 1149E+00 3.4031E+00 07 I. -9.7541E-02 -2.8157E-01 0908E+01 9.7433E-02 08 -7. 1607E+00 -9.7360E+00 2.8545E+00 1.7921E+00 4721E+00 -1.2754E+00 3.9466E-01 4.4264E-01 09 1.

10 -5. 0826E+00 -6.1765E+00 1.6168E-01 6.5761E-01 11 -2. 5489E+00 1.5439E+00 -3.9444E-02 1.3044E+00 -2.8196E+00 2.2326E+00 12 -8. 7487E+01 -4.4638E+01 13 -4. 8475E+00 -1.1509E+00 4.5328E-01 3.5093E-01 14 2. 3736E+00 3.0074E+00 -4.5071E-01 -5.4769E-01 15 -2. 2836E+00 -6.2628E-01 -9.5210E-02 -1.1448E-01 16 7. 8651E+00 1.3922E+01 -2.5839E+00 -2.2699E-01 17 3. 3671E+00 -2.2315E+00 -1.6380E-02 4.8234E-01 18 -5. 9582E-01 1.2929E+00 4.3133E-01 -1.9687E-01 19 8. 3287E-01 -7.9408E-01 1.4592E-01 -1.6408E-01 20 -2. 8392E+00 1.2150E+00 -1.2934E+00 -4.3966E-02 Lateral Spider Arm Load, Cyclic Load, Ib ib -8.3869E+01 -1.2809E+01 4.2400E+01 9.7566E+01 Nth COSINE SINE COSINE SINE 01 -3.3185E+00 1.4656E+00 4 .5772E+01 5.2141E+01 02 3.7963E+00 -1.3226E+00 -5 .2270E+00 1.0205E+01 03 9.8364E-01 6.1052E-01 1 .4543E+01 1.4318E+01 04 -4.7516E+00 -1.3777E+01 i .0307E+01 -1.2401E+00 05 -9.9511E-01 1.3266E-01 1 .0284E+01 -1.3017E+01 -6.1394E-01 -1 .2215E+01 -6.7437E+00 06 -8.5693E-01 .5377E+00 -4.2918E+00 07 -9.1427E-01 1.3749E-01 3 08 -2.8295E+00 -3.1211E+00 4 .4922E+00 -2.1850E+00 09 -8.5082E-01 -2.3749E-01 9 .8216E-01 1.8032E+00 10 6.0410E-01 -7.1300E-02 4 .0110E+00 -8.7678E-02 11 6.4712E-01 -1 .4374E+00 -6 .0305E-01 4.1319E+00 12 1.3832E+01 2 .4378E+00 -7 .3438E+00 1.0509E+00 13 7.2766E-02 -4 .5337E-01 -1 .4280E+00 -4.7885E+00 14 4.1576E-01 -5 .4941E-02 -4 .2479E+00 3.5327E+00 15 2.9038E-01 3 .4687E-01 -9 .3005E-02 3.4732E-01 16 4.7875E+00 -2 .5010E-01 1 .1708E+00 -1.2263E+00 17 -9.0940E-02 -4 .2954E-01 -1 .8732E+00 8.0888E-01 18 -5.4120E-01 2 .2241E-01 3 .0974E+00 -1.7852E+00 19 -3.5536E-01 1 .7535E-01 -3 .7658E-01 -4.4716E-02 20 2.9945E+00 I .2227E+00 7 .2723E-01 3.3768E-01 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.0407E+01 4.5061E+02 I/2PP 2.7489E+00 1.2337E+03 Nth COSINE SINE COSINE SINE 01 9.9653E-01 -2.5136E+00 -8.3877E+02 7.9428E+02 02 2.4855E-01 4.0376E-02 5.0962E+01 2.6524E+00 03 2.6893E-01 6.0964E-02 8.9008E+01 -1.1987E+02 04 3.4697E-02 2.3021E-02 -1.0042E+01 -3.7458E+01 05 1.1304E-01 -3.8213E-02 2.4569E+00 -1.4570E+01 06 -5.7402E-03 2.1048E-02 5.0552E+00 -5.0870E-01 07 -1.7188E-02 -2.4010E-02 1.3592E+01 -I.0342E+01 08 -1.7995E-02 -1.6178E-04 -6.0351E+00 7.1210E+00 09 -2.6186E-03 2.2061E-02 -5.7125E+00 -1.9102E+01 10 6.5180E-03 -3.0965E-02 -1.2954E+01 9.0210E+00 11 -3.2543E-02 6.6659E-03 1.0824E+01 3.9107E+00 12 -2.6418E-02 5.4212E-03 -1.3888E+00 1.4182E+01 13 -1.1125E-03 -1.9247E-02 9.4381E-01 -7.5798E-01 14 5.5392E-03 1.4382E-02 4.1474E+00 -3.4204E+00 15 3.8349E-04 7.2240E-03 -6.7993E-01 6.6171E+00 16 -4.1976E-03 -5.0255E-03 -5.9569E+00 -7.9333E-01 17 8.7721E-03 6.1635E-03 -1.6561E+00 -3.4745E-01 18 4.3673E-03 -1.5937E-05 -4.2683E+00 6.9863E+00 19 -1.5191E-02 -4.1869E-04 -9.2291E-01 -3.6449E+00 20 8.2852E-03 -3.9340E-03 5.3556E-01 -2.6201E+00 MR Shaft Torque, in-lb MEAN 1.0076E+05 1/2PP 5.9529E+03 Nth COSINE SINE 01 9.5337E+01 2.0810E+03 02 7.2667E+01 5.3770E+02 03 -1.1304E+02 5.3881E+02 04 -1.4017E+02 2.4649E+03 05 2.9553E+01 2.7416E+02 06 -6.6860E+02 4.1573E+02 07 -2.2245E+02 3.2864E+02 08 2.7064E+02 -4.3141E+01 09 3.9254E+01 1.4017E-01 10 -3.7961E+02 -9.6710E+01 11 7.2689E+01 9.0025E+01 12 -5.6249E+02 -5.7576E+02 13 -3.3494E+01 -3.7989E+01 14 -1.3489E+02 1.5058E+02 15 1.1643E+01 2.1337E+00 16 1.7943E+01 1.0152E+02 17 1.5161E+01 1.6646E+01 18 -1.3752E+02 -4.1492E+01 19 -1.2822E+01 3.8737E+00 20 2.5421E+00 6.4399E+01 Flight 499, Condition D Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb -7.9747E+03 MEAN 1.6225E+04 1.7557E+04 I/2PP 8.9086E+03 Nth COSINE SINE COSINE SINE 01 -3.9950E+03 8.1331E+02 -1.3886E+04 9.2557E+03 02 -2.0831E+03 1.0322E+02 1.1729E+03 1.0310E+03 2.3500E+03 -8.9196E+02 03 2.3543E+03 -3.9529E+03 04 -5.7867E+01 5.1199E+02 -3.6252E+01 3.6142E+02 05 -4.9114E+02 -2.1905E+02 5.6111E+02 7.2530E+02 06 4.3148E+02 8.3106E+00 2.6831E+02 1.6950E+02 07 5.1604E+02 1.0937E+02 -3.8300E+01 -1.3502E+02 08 4.7486E+02 2.0497E+02 -7.6654E+01 4.0821E+00 -1.8841E+02 2.0882E+02 09 1.5021E+02 -7.7432E+00 10 -2.7238E+01 -6.7953E+00 4.5556E+01 -2.8712E+02 11 -4.1877E+01 -1.0727E+02 -2.2600E+02 -1.8452E+02 12 3.2882E+01 -7.8782E+01 -4.1165E+01 5.5788E+01 13 -8.9784E+01 -3.0489E+01 -5.1910E+01 -1.8860E+01 14 -3.0046E+01 -1.4852E+01 -1.7940E+00 -7.1339E+00 -2.5761E+01 -9.3670E+00 15 -8.2946E+00 1.5273E+01 16 5.0385E+00 2.9684E+01 -4.0248E+01 1.9526E+01 17 2.4051E+01 -6.3463E+01 2.2514E+01 2.0546E+01 18 3.6367E+01 1.6323E+01 6.7374E+01 -1.0210E+02 19 5.2608E+00 -6.3316E+00 9.5655E+00 1.3645E+01 20 2.3735E+00 1.0179E+01 1.6925E+01 -6.1018E+00 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.5376E+04 -1.0880E+03 1/2PP 2.0552E+03 6.5994E+03 Nth COSINE SINE COSINE SINE 01 -1.1141E+03 6.5601E+01 -6.4222E+03 1.9829E+03 4.9618E+02 5.2876E+02 02 -8.1703E+02 4.6545E+02 03 2.8000E+02 -4.5299E+02 8.6742E+02 -2.3983E+02 04 -2.3541E+00 8.2851E+00 7.2120E+01 -8.0955E+01 05 9.1774E+01 1.4517E+02 4.5317E+01 1.1580E+02 06 -1.6159E+02 1.7855E+01 4.9382E+01 6.6477E+01 2.9524E+01 -2.1869E+01 07 -2.3025E+02 -8.4683E+01 08 -2.5986E+02 -8.9161E+01 -1.7569E+01 -1.4983E+01 09 -8.9740E+01 -4.9694E+01 -5.0563E+01 2.1208E+01 10 2.6453E+01 2.5849E+01 -4.0058E+01 -2.1451E+01 11 5.7467E+01 1.1284E+02 -3.9596E+01 -2.3637E+01 12 -3.0441E+01 6.1002E+01 -4.5726E-01 -3.6147E+00 13 7.9874E+01 1.6475E+01 -7.3258E+00 3.2887E+00 14 2.5044E+01 9.3763E+00 -7.6655E+00 6.7343E+00 15 3.5329E+00 -2.2357E+01 -2.9433E+00 4.4456E+00 16 -3.6665E+00 -1.6680E+01 -4.6936E+00 -3.3165E+00 17 -2.9866E+01 5.8967E+01 -1.5828E+01 6.5638E+00 18 -4.4847E+01 2.2690E-01 -3.1566E+00 -4.4489E+00 19 -7.5215E+00 -6.8345E+00 2.6322E+00 -4.5327E+00 20 3.4689E+00 -3.9374E+00 4.2914E+00 1.8866E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.4926E+04 -1.4238E+03 1/2PP 2.0800E+03 6.2242E+03 Nth COSINE SINE COSINE SINE 01 -1.1108E+03 -1.5685E+02 -5.1399E+03 2.7546E+03 02 -5.5307E+02 3.2201E+02 6.8376E+02 2.5374E+02 03 -2.4040E+02 4.4751E+02 -7.0457E+00 -4.9876E+02 04 -8.0083E+00 -1.7621E+02 -4.1958E+01 -5.2666E+02 05 2.3440E+02 2.0348E+02 -6.7304E+01 -7.8189E+01 06 -3.2014E+02 7.1181E+00 -5.6443E+00 -1.9249E+00 07 -3.4687E+02 -1.1595E+02 2.1821E+01 6.1302E+01 08 -3.5398E+02 -1.3802E+02 -3.8597E+00 -2.9102E+01 09 -9.6187E+01 -3.4293E+01 8.3217E+01 -8.5793E+01 10 1.4481E+01 3.3548E+01 1.4044E+01 8.7868E+01 11 5.9256E+01 9.0741E+01 8.0453E+01 6.2878E+01 12 -I.0274E+01 6.1950E+01 -4.7733E+00 -9.7566E+00 13 5.7504E+01 8.2033E+00 1.9042E+01 6.4192E+00 14 9.2237E+00 -3.6680E+00 -1.4624E-01 -1.3412E+00 15 3.3683E+00 -6.3647E+00 4.3284E+00 8.1978E+00 16 -3.9985E+00 -9.1396E+00 5.8758E+00 -5.2742E+00 17 -3.0086E+00 1.4707E+01 -3.8565E+00 -6.3766E+00 18 -1.1358E+01 4.6846E+00 -2.9916E+01 4.7046E+01 19 3.4329E+00 5.1824E+00 -6.6161E+00 -4.9734E-01 20 -1.2585E-01 -5.6712E-02 -7.2936E+00 -5.0799E-01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb

in-lb

-6.1364E+03

MEAN 1.0812E+04

7.8104E+03 1/2PP 2.5430E+03 COSINE SINE Nth COSINE SINE 01 -7.8598E+01 -1.0719E+03 -5.5476E+03 4.2020E+03 02 -7.1268E+02 2.4218E+02 9.3769E+02 1.6491E+02 -9.4878E+02 -9.1091E+02 03 -5.7520E+02 7.5252E+02 -1.2796E+02 -9.5144E+02 04 -8.0428E+01 -3.1730E+02 05 2.7628E+02 4.3649E+01 -2.0699E+02 -3.3146E+02 -1.1192E+02 -9.4736E+01 06 -2.4709E+02 2.4882E+01 07 -1.6151E+02 -2.3197E+01 -5.0570E+01 9.2422E+01 08 -1.1328E+02 -9.0789E+00 -1.6199E+01 -2.3851E+01 1.4320E+02 -1.1291E+02 09 8.9564E+00 1.7432E+01 4.9142E+01 1.0663E+02 10 -7.6486E+00 6.6289E+00 1.4084E+02 1.1274E+02 11 -6.3888E-01 -4.1265E+01 -4.3934E+00 1.0482E+00 12 2.2490E+01 -2.0562E+01 4.8244E+01 3.0204E+00 13 -4.1866E+01 -1.5685E+01 1.8690E+01 -3.8834E+00 14 -2.5227E+01 -1.6100E+01 1.1695E+01 -1.4027E+01 15 4.4911E-01 1.1443E+01 1.2859E+01 -4.3271E+00 16 4.9860E+00 1.0783E+01 1.9607E+01 1.3855E+01 17 3.4593E+01 -4.6189E+01 7.3108E+00 -2.7681E+01 18 3.8069E+01 -7.0845E-01 -I.0293E+00 1.0806E+01 19 5.6627E+00 6.5612E+00 -3.9412E+00 -6.8443E+00 20 -4.8511E+00 2.1334E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 4.4056E+03 -3.6368E+03 6.5018E+03 1/2PP 3.6531E+03 Nth COSINE SINE COSINE SINE 01 1.0670E+03 -2.2338E+03 -3.8646E+03 2.4771E+03 02 -1.2751E+03 1.5333E+02 8.4410E+02 1.5073E+02 03 -6.3827E+02 8.4792E+02 -1.5457E+03 -7.3010E+02 04 -5.6572E+01 -1.2746E+02 -1.6573E+02 -9.3935E+02 05 -7.0002E+00 -6.0495E+01 -4.8580E+02 -6.3716E+02 06 1.0798E+02 -2.6494E+01 -1.3835E+02 -1.5859E+02 07 2.4395E+02 9.4928E+01 -5.2078E+01 -1.6142E+00 08 2.4017E+02 9.1666E+01 8.2913E+01 5.3625E+01 09 8.1319E+01 9.0129E+00 2.3205E+00 2.4868E+01 10 8.3761E+00 -3.4772E+01 7.7299E+00 -4.9273E+01 11 -3.2710E+01 -4.9440E+01 5.7583E-01 -1.4418E+01 12 1.1102E+01 -3.6865E+01 6.9914E+00 3.6121E+00 13 4.6229E+00 1.0921E+01 2.0478E+01 -7.8439E+00 14 1.4812E+01 1.0664E+01 1.2530E+01 -2.5525E+00 15 7.2296E+00 -3.7629E+00 1.0493E+01 -2.8756E+01 4.1279E+00 -5.2500E+00 16 2.3727E+00 -2.2785E+00 17 -2.5433E+01 3.3438E+01 8.6198E-01 4.4802E+01 8.5611E+01 -1.2162E+02 18 -2.3662E+01 -1.5608E+00 19 -6.3452E-01 -6.7073E-01 8.7911E+00 1.0043E+01 20 4.0373E+00 1.6307E+00 1.2969E+01 -2.7621E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -2.9773E+02 -6.6273E+03 1/2PP 3.6262E+03 4.8885E+03 Nth COSINE SINE COSINE SINE 01 1.3406E+03 -1.8720E+03 -2.4628E+03 8.7404E+02 02 -1.8662E+03 -1.1882E+02 5.4693E+02 1.7652E+02 03 -7.3937E+02 9.3679E+02 -1.3397E+03 -4.6537E+02 04 -5.5007E+01 1.4527E+02 -2.6465E+02 -6.6882E+02 05 -1.4843E+02 -2.5865E+01 -5.4147E+02 -5.0582E+02 06 8.1011E+01 6.2813E+01 -3.9007E+01 -1.0543E+02 07 7.9871E+01 1.9150E+01 -6.8520E+01 -1.0140E+02 08 3.8218E+01 -1.3963E+01 2.5941E+01 2.0794E+01 09 -6.9158E+01 -1.3471E+01 -1.4981E+02 1.3207E+02 10 -5.6222E+00 2.6679E+01 -2.6479E+01 -1.4404E+02 11 1.8871E+01 7.8965E+01 -1.1500E+02 -7.4853E+01 12 -3.6540E+01 5.1391E+01 1.1792E+01 1.9642E+01 13 1.9479E+01 1.3145E+01 -1.6939E+01 -3.0208E+00 14 -4.6398E+00 -1.1977E+01 -8.2956E+00 -8.6726E+00 15 -4.5828E+00 -9.0700E+00 -1.0907E+01 7.2503E+00 16 -7.1917E+00 -2.0494E+00 -5.4868E+00 2.2552E+00 17 1.1029E+01 -1.3859E+01 -9.3305E+00 -1.1024E+01 18 1.5346E+01 1.7034E+00 -1.1380E+01 3.4782E+01 19 1.7890E+00 3.7645E+00 -I.0584E+00 -5.2542E+00 20 -6.0235E+00 -2.5270E+00 -1.5828E-01 2.0351E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -3.7300E+03 -6.3244E+03 1/2PP 3.4138E+03 2.4640E+03 Nth COSINE SINE COSINE SINE 01 2.7748E+02 -4.4880E+02 -8.9220E+02 -2.8901E+02 02 -1.6741E+03 6.4800E+01 1.6357E+00 3.7602E+01 03 -9.3285E+02 5.7163E+02 -7.0943E+02 -1.2132E+02 04 -I.0055E+02 4.5443E+02 -9.3077E+01 -3.1833E+02 05 -4.1719E+01 1.9861E+02 -3.1599E+02 -2.8289E+02 06 2.9871E+01 -4.7301E+01 -1.6724E+01 -2.2216E+01 07 -2.5453E+02 -1.2006E+02 -7.6328E+01 -1.1432E+02 08 -2.3105E+02 -5.5026E+01 -6.8726E+01 -5.8535E+01 09 4.1861E+00 -1.5150E+00 -1.7441E+02 1.0014E+02 10 2.6130E+01 -3.0011E+00 -2.0196E+01 -8.2011E+01 11 -1.0742E+01 -3.7995E+01 -8.2163E+01 -8.3063E+01 12 1.4592E+01 -2.7636E+01 2.0425E+01 -1.2277E+01 13 -1.2771E+01 -1.5183E+01 -4.8378E+01 -1.1094E+01 14 8.3853E+00 3.4840E-01 -1.6616E+01 3.8245E+00 15 -1.2428E+00 1.1415E+01 -1.4757E+01 4.1311E+01 16 3.2516E+00 7.7349E+00 -5.0355E+00 6.1336E+00 17 -2.4345E-01 3.9893E+00 -1.3809E+01 -4.7694E+01 18 -4.2192E+00 -5.5665E+00 -9.1718E+01 1.3254E+02 19 -3.0775E+00 -1.5820E-02 -1.4109E+01 -1.0505E+01 20 1.8306E+00 5.2921E+00 -7.7627E+00 7.8695E-01 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -9.8281E+02 1.8010E+00 I/2PP 2.0825E+02 1.6574E+01 Nth COSINE SINE COSINE SINE 01 -1.3857E+00 -1.3955E+01 -1.8238E+00 2.3553E+00 02 -2.6171E+01 -6.1085E+00 4.1225E+00 8.1225E+00 03 -3.0890E+01 2.1384E+01 -5.2539E-02 -1.6872E+00 04 7.8927E+01 6.4988E+01 -2.0773E+00 2.0961E+00 -5.7,575E-03 -3.3089E-01 05 -7.5405E+00 -2.8305E+00 06 -9.2539E+00 9.2133E-01 1.8026E+00 -1.2715E+00 07 1.2302E+01 -1.7437E+00 -1.1265E+00 -9.0602E-01 08 3.8396E+01 -2.0292E+01 -9.5488E-01 9.4108E-01 09 -2.2751E+00 -3.7104E+00 1.9946E-01 5.9258E-01 10 -1.3573E+00 -2.6811E+00 3.5870E-01 3.0715E-01 11 -3.3734E+00 -1.3175E+00 -8.8496E-02 6.4164E-01 12 -1.6095E+01 -2.5392E+01 -1.2249E+00 2.5149E+00 13 2.1251E-01 1.8323E+00 -3.0306E-02 -2.6104E-01 14 -3.1339E-01 5.2767E-01 -6.8111E-02 -8.6295E-02 1.4672E-01 -1.3299E-01 15 -2.3809E-01 1.5533E+00 -8.5989E-02 -5.4708E-01 16 -1.1117E+00 1.0523E+00 2.5568E-02 17 -3.8366E-01 1.2973E+00 3.1097E-02 18 -1.8328E+00 -5.0044E-01 -7.0141E-02 8.4351E-02 19 -4.2078E-01 -5.5556E-01 1.2686E-01 -1.1189E-01 20 3.1104E+00 -1.7496E+00 -1.1592E-01 1.0630E-02 Lateral Cyclic Load, Spider Arm Load, ib ib MEAN -1.3255E+02 -3.5609E+01 1.3482E+02 1/2PP 3.2803E+01 Nth COSINE SINE COSINE SINE 01 -2.9083E+00 2.2952E-01 9.3373E+01 4.8711E+01 02 3.5015E+00 -3.7057E+00 -1.5591E+01 2.7118E+01 03 3.5189E+00 -2.0876E+00 -2.0084E+00 1.2234E+01 04 -1.4917E+01 -1.1770E+01 4.5550E+00 3.0655E+00 05 1.4459E+00 1.4871E+00 3.2245E+00 5.3836E-01 06 -1.4498E-01 2.5628E+00 7.1497E+00 -3.0348E+00 07 1.7013E-01 5.7108E-01 4.5645E+00 -1.0667E+00 08 -3.3412E+00 1.1281E+00 6.0668E+00 -3.6846E+00 -7.5919E-01 09 -1.8105E-02 -4.8697E-01 1.6655E+00 10 -2.8974E-01 -3.0854E-01 3.6404E-03 1.9142E+00 2.5494E+00 11 4.9299E-01 -7.6511E-01 -3.1806E+00 -9.1688E-01 12 6.6331E+00 -1.4627E+00 -2.1099E+00 1.6471E+00 13 -3.0111E-01 -1.8220E-01 -2.4167E+00 14 2.2137E-01 -8.3291E-02 2.8163E+00 3.5880E+00 -5.0274E-01 15 -3.8086E-01 6.1019E-02 2.8676E-02 4.3869E-02 1.7865E-01 16 3.7276E-01 9.8822E-01 -1.6807E-01 -4.8416E-01 17 -8.5449E-02 -2.8782E-01 18 2.7666E-01 -1.0543E-01 9.4784E-01 -2.7674E-01 19 -2.6100E-01 1.6613E-01 -2.3298E-01 -6.4756E-02 1.6358E-02 -1.9175E-01 20 -1.7603E-02 6.7472E-02 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.2765E+01 4.8362E+02 I/2PP 3.9291E+00 1.2506E+03 Nth COSINE SINE COSINE SINE 01 5.5977E-01 -4.0501E+00 -5.5201E+02 1.0567E+03 02 2.4072E-01 2.9685E-01 7.0205E+01 -8.1706E+00 03 2.7197E-01 -2.5767E-01 -3.5628E+01 -1.4209E+02 04 -2.3357E-02 7.9158E-02 -3.0206E+01 -4.7151E+01 05 1.2085E-01 1.2078E-01 5.7544E+01 3.9833E+01 06 -1.8085E-02 3.0925E-02 -2.0896E-01 -4.0381E+00 07 -2.8737E-02 -3.0265E-02 -2.5030E+01 2.4313E+00 08 -3.7016E-02 -3.3304E-02 -2.9639E+01 -7.9432E+00 09 2.9281E-03 -4.4921E-03 8.3132E+00 -4.4726E+00 10 1.0188E-02 -2.0365E-02 2.0998E+01 -2.1366E+00 11 -1.6919E-02 3.4128E-03 4.5114E+00 8.8904E+00 12 -4.8591E-03 5.1420E-03 -6.5351E+00 1.1546E+01 13 -6.9294E-03 1.0147E-02 4.1464E+00 5.8641E-01 14 1.2204E-02 7.7503E-03 2.4996E+00 -2.9542E+00 15 -8.7541E-03 7.3927E-03 -3.7993E+00 1.1942E+00 16 -1.2478E-02 1.7901E-04 -5.2505E+00 2.6765E+00 17 -1.5361E-02 -1.7576E-03 2.9641E+00 -6.1430E-01 18 5.4357E-03 -7.3338E-03 -6.4140E+00 6.9126E+00 19 -5.2571E-03 -6.3027E-03 -1.4413E+00 1.4151E+00 20 1.0470E-02 2.6144E-03 2.7272E-01 -2.0956E+00 MR Shaft Torque, in-lb 1.3238E+05 MEAN I/2PP 9.7131E+03 Nth COSINE SINE 01 3.1401E+02 1.8936E+03 02 1.0576E+03 4.1653E+03 03 3.1004E+02 6.0218E+02 04 2.4400E+02 4.4340E+03 05 1.5409E+02 -1.5346E+02 06 -5.2074E+02 1.1154E+03 07 4.4555E+02 -1.0200E+02 08 4.0438E+02 2.7242E+02 09 8.5847E+00 -6.9127E+01 10 2.0387E+02 3.2712E+02 11 -1.8892E+01 -9.9936E+01 12 -2.3818E+02 -5.3563E+01 13 2.8841E+01 -6.2175E+01 14 1.6144E+02 7.7724E+01 15 3.9666E+01 -5.6824E+01 16 6.3472E+01 6.3459E+01 17 2.1595E+01 -3.0129E+01 18 -3.8570E+00 2.7313E+01 19 1.0761E+01 -3.8855E+01 20 7.0513E+01 5.8298E+01 Flight 499, Condition F Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb 9.7669E+02 MEAN 1.6906E+04 2.1795E+04 I/2PP 1.9006E+04 Nth COSINE SINE COSINE SINE 01 -5.7573E_03 3.2919E+03 -1.4666E+04 1.3238E+04 02 -6.9644E+03 -2.5785E+03 1.6038E+03 1.0321E+03 03 3.2173E+03 -9.0133E+03 3.1286E+03 -2.2230E+03 04 -1.2000E+03 1.3255E+03 3.5896E+02 5.7398E+02 05 7.6818E+01 -2.0493E+02 7.6274E+02 -1.7265E+02 06 -5.0621E+01 1.3257E+02 -8.3218E+01 5.5294E+01 07 -6.7695E+01 -1.7821E+01 8.8588E+01 2.9183E+01 08 -1.3445E+02 1.3264E+02 9.5289E+00 2.9260E+01 09 -1.0013E+02 2.3976E+01 1.0961E+02 -1.6969E+02 10 -2.6913E+01 5.7925E+01 2.5058E+02 2.7060E+02 11 -5.2589E+01 2.3515E+01 2.6745E+02 1.6826E+02 12 -7.2047E+01 1.5315E+02 -3.6003E+01 -7.3591E+01 13 6.1154E+01 4.8491E+01 1.1219E+02 1.8965E+01 14 5.0945E+00 1.3577E-01 2.2754E+01 2.8724E+00 15 -4.3203E+00 -4.1685E+01 3.4163E+01 -8.3454E+00 16 1.4380E+01 -1.6411E+01 -3.3514E+01 2.0813E+01 17 6.3652E+00 -4.3980E+01 -4.0684E+01 3.4718E+01 18 8.3932E-01 -8.1741E-01 -1.8643E+01 2.9040E+01 19 -2.7118E+00 -1.2968E+01 -4.7313E+00 -3.1088E+01 20 -2.3507E+00 1.0841E+00 5.5560E+00 3.3206E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 1.5326E+04 3.7392E+03 I/2PP 4.2512E+03 8.8991E+03 Nth COSINE SINE COSINE SINE 01 -1.6335E+03 8.0755E+02 -8 .0068E+03 4.0829E+03 02 -2.1150E+03 7.2624E+01 4 .9723E+02 5.0730E+02 03 4.5925E+02 -1.0846E+03 1 .2520E+03 -1.0784E+03 04 3.2913E+01 4.4789E+01 4 .9944E+01 -2.0004E+02 05 -8.4904E+01 2.5000E+02 1 .0008E+02 1.5527E+02 06 -7.1848E+00 -9.9718E+01 -3 .0085E+01 9.6931E+01 07 9.1003E+01 -3.7579E+01 -8 .9980E+00 -2.2675E+01 08 5.8269E+01 -6.4470E+01 6 .9421E+00 -2.0019E+01 09 5.5606E+01 -4.1100E+01 i .4185E+01 -2.9620E+01 10 2.0124E+01 -2.2634E+01 8 .3579E+01 1.0658E+01 11 3.9740E+01 -1.1805E+02 7 .6613E+01 1.5524E+01 12 4.8173E+01 -8.5574E+01 1 .0768E+01 4.1669E+00 13 -2.8718E+01 1.7326E+00 3 .0404E+01 5.9965E+00 14 -1.2918E+00 8.6330E+00 -1 .0758E+01 -4.1630E+00 15 -1.2722E+01 1.5642E+01 -7 .3053E+00 -3.3718E+00 .6036E+00 2.5094E+00 16 1.1396E+00 2.2071E+01 -2 17 1.6034E+01 2.4601E+01 1 .0788E+01 -7.0900E+00 18 6.9524E+00 1.9563E+01 -1 .5653E+00 1.0085E+01 19 3.1798E+00 1.6405E+01 -I .4763E+00 3.4070E+00 20 -5.4990E+00 7.0231E+00 -3 .3181E+00 6.3639E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb 1.7219E+03 MEAN 1.5506E+04 I/2PP 2.9583E+03 7.8523E+03 Nth COSINE SINE COSINE SINE -5.8793E+03 4.2956E+03 01 -1.3386E+03 4.6852E+02 02 -1.0583E+03 3.4473E+02 9.6691E+02 2.6323E+02 -2.0007E+02 -1.1119E+03 03 -2.8849E+02 9.7593E+02 04 2.7011E+02 -3.1388E+02 -7.7686E+02 -7.0437E+02 05 -1.4048E+02 3.2893E+02 5.0951E+01 2.1857E+01 06 -1.6080E+01 -1.5137E+02 -2.1454E+01 9.2642E+00 07 1.0070E+02 -3.4637E+01 -2.1818E+00 6.4238E+01 2.2811E+01 1.5868E+01 08 9.5535E+01 -1.0567E+02 09 8.3041E+01 -3.7868E+01 -5.8930E+01 7.3377E+01 10 1.0400E+01 -4.3400E+01 -1.1443E+02 -6.8538E+01 11 1.9889E+01 -4.4033E+01 -1.0066E+02 -5.9686E+01 12 3.7688E+01 -7.9294E+01 8.7528E+00 2.5982E-01 13 -5.1775E+01 -2.5194E+01 -2.6505E+01 4.0895E+00 14 -9.3564E-01 2.6143E+00 4.5924E+00 -3.5866E+00 15 4.6406E+00 1.4689E+01 -4.6218E+00 3.0676E+00 16 2.8207E+00 1.0911E+00 2.3714E+00 -2.9691E+00 17 2.1629E+00 9.3904E+00 1.0221E+01 -1.7960E+01 18 4.0588E+00 -6.9232E-01 2.3089E+00 -1.9963E+01 19 7.3299E+00 8.2576E+00 6.1466E+00 1.3335E+01 20 -5.6916E+00 1.3334E+00 2.3898E-01 -I.0773E+01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.1488E+04 -3.6773E+03 I/2PP 3.1979E+03 9.6727E+03 Nth COSINE SINE COSINE SINE 01 4.4911E+02 -8.2277E+02 -5.9007E+03 5.8667E+03 02 -7.0235E+02 7.2058E+02 1.3005E+03 1.8951E+02 03 -7.5854E+02 1.8548E+03 -1.7464E+03 -1.4860E+03 04 2.6262E+02 -4.6996E+02 -1.5365E+03 -1.2388E+03 05 -4.9867E+01 1.6899E+02 -1.6971E+02 -1.0603E+02 06 -3.7498E+01 -1.0694E+02 9.9079E+00 -1.5953E+02 07 5.2171E+01 -2.2363E+01 7.0461E+00 4.7995E+01 08 1.9102E+01 -5.2441E+01 2.1208E+01 3.4786E+01 09 3.3255E+01 -6.2469E+00 -6.1032E+01 1.1645E+02 10 -1.7910E+01 -7.7668E+00 -2.1479E+02 -9.8143E+01 11 -3.0689E+01 7.8277E+01 -2.0344E+02 -1.0559E+02 12 -3.2909E+01 3.6940E+01 -6.2855E+00 -1.7424E+01 13 -9.4048E+00 4.6136E+00 -8.1570E+01 3.4258E+00 14 -3.8260E+00 -8.4276E+00 9.5872E+00 1.5767E+00 15 8.1885E+00 -5.2563E+00 -6.8782E+00 1.9022E+01 16 -5.7281E+00 -2.3243E+01 9.3424E+00 -4.4957E+00 17 -1.6930E+01 -1.5082E+01 -1.6596E+01 3.7694E+01 18 -9.8989E+00 -1.9319E+01 1.6845E+00 1.0195E+00 19 -5.3311E+00 -9.8994E+00 -3.3079E+00 2.6764E+00 20 9.6190E-01 -1.0170E+01 2.8105E-01 -1.2141E+01 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 4.8877E+03 -2.2576E+03 1/2PP 4.8692E+03 8.0820E+03 Nth COSINE SINE COSINE SINE 01 2.0754E+03 -2.2885E+03 -4.5705E+03 3.5539E+03 02 -1.3413E+03 4.9985E+02 1.1290E+03 3.3929E+02 03 -6.7975E+02 1.7980E+03 -2.6184E+03 -9.3735E+02 04 7.4838E+01 -2.8418E+02 -1.5650E+03 -1.2645E+03 05 9.4291E+01 -5.0337E+01 -6.1820E+02 -1.2955E+02 06 -4.5324E+01 -1.6578E+01 7.0853E+01 -1.6997E+02 07 -3.6352E+01 1.0873E+01 -5.7594E+01 -1.3352E+02 08 -5.8583E+01 6.1884E+01 -4.8188E+01 2.4923E-01 09 -6.1953E+01 5.0777E+01 5.0722E+01 -2.6891E-01 10 -5.6033E+00 1.2973E+01 2.7386E+01 2.9501E+01 11 1.3849E+00 2.0971E+01 -9.0726E+00 2.9114E-01 12 -1.1300E+01 2.2045E+01 -1.7056E+01 1.5570E+00 13 2.9559E+01 1.7365E+01 -2.7211E+01 7.9783E+00 14 -2.4209E+00 -8.1287E-01 -1.9438E+00 3.2193E+00 15 -8.8941E+00 7.9978E+00 -1.1869E+01 2.0216E+01 16 -1.0531E+00 1.1870E+01 1.4602E+01 4.9737E+00 17 1.2426E+01 1.3865E+01 -3.1735E+01 8.2581E+01 18 3.9359E+00 7.5832E+00 -1.3055E+01 6.1609E+01 19 3.6330E+00 9.9745E+00 -1.1563E+01 -1.4513E+01 20 -3.4296E+00 2.2538E+00 -5.4353E+00 1.0978E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -7.5270E+00 -5.8620E+03 1/2PP 5.0112E+03 5.9664E+03 Nth COSINE SINE COSINE SINE 01 2.1157E+03 -2.2203E+03 -2.9390E+03 1.5306E+03 02 -2.2374E+03 2.0694E+02 6.3377E+02 2.2061E+02 03 -6.0619E+02 1.1068E+03 -2.2299E+03 -2.6024E+02 04 -2.1001E+02 3.1219E+02 -1.2076E+03 -8.4556E+02 05 -1.1905E+01 -1.2520E+02 -6.4480E+02 -6.3748E+01 06 6.4394E+01 1.0245E+02 7.1827E+01 -1.6517E+02 07 -1.0113E+02 2.4005E+01 -7.9230E+01 -1.3695E+02 08 1.6041E+00 -6.3805E+00 -5.5775E+01 -5.8030E+01 09 -8.1060E+00 1.5043E+01 1.2345E+02 -1.0139E+02 10 8.4833E+00 -1.1081E÷01 2.2010E+02 8.9172E+01 11 2.9474E+01 -7.2000E+01 1.6965E+02 7.6923E+01 12 4.3261E+01 -5.9938E+01 7.5367E+00 -1.7589E+01 13 -3.1187E+01 -2.4754E+01 3.5967E+01 -3.2323E+00 14 2.9041E+00 6.3425E+00 -6.7228E+00 -2.2566E+00 15 4.9919E+00 6.6548E-01 6.9720E+00 -4.2394E+00 16 4.7146E+00 -2.5203E+00 -7.8223E+00 3.2965E-01 17 -6.0081E+00 -4.9462E+00 8.4968E+00 -2.8500E+01 18 -1.7747E+00 -5.1823E+00 -1.8788E-01 -1.4176E+01 19 -2.6768E+00 -5.2176E+00 3.1978E+00 2.0389E+00 20 5.5282E-01 8.6731E-01 -1.2203E+00 -1.6509E-01 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb -3.7372E+03 -5.8694E+03 3.3582E+03 2.6665E+03 Nth COSINE SINE COSINE SINE 01 2 .8793E+02 -7.0630E+02 -1.0437E+03 -1.7669E+02 02 -2 .2892E+03 8.8855E+01 -4.7788E+01 1.4434E+01 03 -6 .7349E+02 4.5616E+02 -1.0891E+03 -1.8395E+01 04 -2 .4598E+02 4.6924E+02 -5.1829E+02 -3.2714E+02 05 -i .8447E+02 1.3491E+02 -3.5463E+02 -6.1050E+01 06 3 .7670E+01 -1.2165E+01 3.4176E+01 -I.1363E+02 07 7 .7992E+01 -1.1536E+01 -1.4913E+01 -1.0231E+02 08 6 .4480E+01 -5.0691E+01 5.1791E+00 -6.2821E+01 09 2 .5874E+01 -3.9405E+01 1.2074E+02 -I.0530E+02 10 -5 .5386E+00 -1.4040E+01 1.8313E+02 6.8065E+01 11 -1 .2422E+01 6.1499E+01 1.3961E+02 1.0840E+02 12 -3 .3563E+01 5.2026E+01 -6.0695E+00 1.1448E+01 13 1 .6913E+01 8.7513E+00 6.7923E+01 9.8302E+00 14 7 .7079E-01 -5.0186E+00 3.5626E+00 -7.8143E+00 15 -2 .4910E+00 4.4188E-02 1.7341E+01 -2.2974E+01 16 -3 .7195E+00 1.1956E+00 -2.1597E+01 -3.9195E+00 17 1 1.1225E+00 3.6356E+01 -8.4698E+01 .6443E+00 18 1 .0397E+00 3.5350E+00 1.2456E+01 -6.2671E+01 19 1 .2015E+00 2.7710E+00 1.3265E+01 2.0836E+01 20 -1 .9930E-01 -1.7572E-01 4.9261E+00 -1.3125E+01 Collective Control Longitudinal Cyclic Load, ib Load, Ib MEAN -1.3038E+03 -2.0561E+01 1/2PP 2.9201E+02 4.5327E+01 Nth COSINE SINE COSINE SINE 01 -9.9148E-01 -6.5011E+00 -5 .3300E+00 5.7254E+00 02 -4.6411E+01 7.5780E+00 5 .3044E+00 9.7671E+00 03 -2.5987E+01 3.8004E+01 -6 .9275E-01 -2.3133E+00 04 1.5768E+02 -1.3426E+02 -2 .3273E+01 1.1501E+01 05 -7.3383E+00 -9.6158E+00 -7 • 1184E-02 -9.0826E-03 06 -4.6095E+00 -1.4480E+01 1 • 1430E+00 -3.2819E-01 07 -8.4818E-01 3.3191E+00 -9 .9561E-01 -1.7924E-01 08 -1.2823E+01 3.5073E+01 -4 • 9180E+00 -9.0938E-01 09 3.0666E+00 -1.8866E+00 -2 .2169E-01 6.1716E-02 i0 1.9703E+00 1.0644E+00 2 .6894E-01 -8.8311E-03 11 4.3796E+00 -1.1006E+00 5 .7564E-02 5.3132E-01 12 2.4995E+01 1.7931E+01 -2 • 8191E+00 -1.4498E+00 13 -1.7176E+00 1.2550E+00 6 .6434E-02 4.7316E-01 14 3.8509E+00 -1.8825E+00 -3 .3573E-01 2.2693E-02 15 -7.8574E-01 -6.0839E-01 1 .3170E-01 -1.0531E-01 16 4.1167E+00 -6.5297E+00 -1 • 3500E-01 4.1466E-01 17 1.1755E+00 2.5798E+00 4 .4628E-02 1.2900E-01 18 5.4248E-01 7.5659E-01 -3 • 0335E-01 -5.3696E-02 19 9.0847E-01 1.9794E+00 1 .1665E-01 4.1150E-01 20 -6.2469E+00 -2.2084E+00 1 .0905E+00 3.0923E+00 Spider Arm Load, Lateral Cyclic Load, ib ib -5.9562E+01 MEAN -2.1115E+02 2.1659E+02 I/2PP 4.5799E+01 SINE Nth COSINE SINE COSINE 01 -3.9485E+00 7.9972E-02 1.5659E+02 4.8837E+01 4.9001E+01 02 3.8253E+00 -9.9416E+00 -9.4083E+00 4.3653E+01 03 5.1860E+00 -1.8696E+00 -2.1985E+01 -2.1640E+01 04 1.7860E+01 -1.6206E+01 9.1736E+00 2.0286E+00 05 4.1031E-01 1.7800E+00 -1.0393E+01 06 -9.1243E-01 3.2833E+00 9.7335E+00 2.8439E+01 07 1.7999E+00 -6.2873E-02 -6.3032E-01 7.3680E+00 08 1.0604E+01 -5.0311E+00 2.9600E+00 3.9585E+00 09 -3.5176E-01 6.7111E-02 1.7384E-01 -5.0523E-01 10 -9.3253E-01 -1.1132E-01 2.9988E+00 -2.7762E-01 11 -9.3572E-03 -5.6502E-01 2.3722E+00 -3.6335E-01 12 5.0026E-01 -3.7602E-02 2.2314E+00 3.7988E-01 13 -1.7200E-01 -7.8528E-01 2.2186E+00 -9.9507E-01 14 -3.0247E-02 -6.7979E-02 -3.4609E+00 5.5559E-01 15 5.4049E-02 1.9444E-01 2.5206E-01 -9.9190E-01 16 -3.3561E-01 2.6455E-02 -9.6342E-01 3.5291E-01 17 -2.8730E-01 -5.0327E-01 5.4138E-01 4.7155E-02 18 3.1394E-01 7.8167E-03 2.3871E-01 -7.6875E-01 -4.9526E-01 19 -3.3786E-01 -1.0773E+00 -6.3417E-02 20 -5.3087E-01 -5.6051E+00 3.3774E-01 1.1443E+00 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.5830E+01 5.4172E+02 I/2PP 5.8855E+00 1.3426E+03 Nth COSINE SINE COSINE SINE -2.4036E+02 1.2014E+03 01 8.6164E-01 -5.9348E+00 1.2564E+02 -1.7019E+01 02 3.7364E-01 5.4006E-01 -1.1139E+02 -1.2859E+02 03 1.5079E-01 -2.9501E-01 -1.0499E+02 -1.3977E+01 04 -8.3355E-02 -3.3698E-02 7.3841E+01 -6.0644E+01 05 2.7695E-02 -1.4470E-02 -1.0064E+01 -3.1855E+01 06 4.1651E-02 4.0225E-02 2.1882E+01 2.8196E+01 07 -2.3917E-02 -1.0547E-02 08 2.0752E-02 6.0155E-02 1.3066E+01 9.8129E+00 09 3.5598E-02 -2.6503E-02 -6.1632E+00 3.6829E+00 -2.7163E+01 5.6797E+00 10 3.3995E-02 4.3602E-02 -9.3409E+00 -5.9359E+00 11 2.7015E-02 1.4332E-02 -4.6078E-01 -1.8989E+01 12 1.5400E-02 2.9796E-03 -3.5125E-01 -3.1882E+00 13 4.8965E-04 -1.4142E-02 14 8.9134E-03 1.1906E-02 7.8061E+00 2.2116E+00 8.1580E+00 -9.6835E-02 15 6.9792E-04 -2.2983E-02 -5.0168E+00 2.4553E+00 16 -2.3167E-03 4.6632E-03 -2.9835E+00 -2.1677E+00 17 -1.9811E-03 -2.8705E-03 4.9753E-01 -7.3619E+00 18 1.2528E-02 9.8055E-03 1.2299E+00 -1.1535E+00 19 -7.6557E-03 -1.0064E-02 1.7671E+00 2.6968E+00 20 -2.3991E-03 1.4535E-02 MR Shaft Torque, in-lb MEAN 1.8802E+05 1/2PP 1.8268E+04 Nth COSINE SINE 01 9.8949E+02 1.8074E+03 02 7.0720E+03 6.7924E+03 O3 3.7032E+02 5.1730E+02 04 6°0793E+03 6.8004E+03 05 -5.5295E+01 -2.5484E+02 06 8.2092E+02 1.1009E+03 07 -9.8218E+01 -1.4577E+02 08 -2.4984E+02 1.0900E+02 09 -5.1135E+01 -7.5131E+01 10 3.1821E+02 4.2510E+02 11 -6.5650E+01 -7.9535E+01 12 -1.6539E+01 1.9380E+02 13 -6.7106E+01 -5.0838E+01 14 -1.8778E+02 -1.3503E+02 15 -8.9577E+01 2.0071E+01 16 6.7796E+00 -5.8371E+00 17 -1.2722E+01 -1.0114E+01 18 -5.7243E+01 9.5898E+01 19 -1.8732E+01 -3.1367E+01 20 8.6338E+00 4.9016E+01 Flight 499, Condition G Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 1.6881E+04 5.6131E+03 1/2PP 2.4678E+04 2.3425E+04 Nth COSINE SINE COSINE SINE 01 -4.3195E+03 4.7689E+03 -1.5021E+04 1.4625E+04 02 -9.8389E+03 -3.7425E+03 1.8760E+03 9.7707E+02 03 4.5775E+03 -1.2271E+04 3.7655E+03 -2.9809E+03 04 -7.2788E+02 2.0780E+03 6.9544E+02 6.7423E+02 05 1.3627E+03 5.3165E+01 1.9056E+03 -I.0290E+02 06 -1.8389E+02 2.6099E+02 -7.6958E+01 -2.7313E+02 07 -2.6284E+02 -4.5813E+02 1.3386E+01 4.2852E+01 08 1.2875E+02 2.6238E+02 4.3068E+01 -5.8791E+00 09 -1.6087E+02 -2.0981E+01 1.8536E+02 -4.3159E+02 10 4.6317E+01 1.9106E+01 1.3774E+02 3.5034E+01 11 -2.5354E+01 4.3307E+01 3.1362E+02 1.3717E+02 12 -8.6135E+01 1.8809E+02 -7.9799E+01 -6.4408E+01 13 1.2296E+02 9.0437E+01 1.4812E+02 2.7743E+01 14 -9.0196E+00 9.4835E+00 3.7048E+01 -1.1988E+01 15 -2.0133E+01 5.5503E+00 9.8637E+00 -2.5346E+01 16 2.0292E+00 -2.4952E+01 -1.1561E+00 5.9655E+01 17 9.4544E+00 -8.1467E+00 -3.3729E+01 7.4790E+01 18 -1.7484E+01 2.3198E+00 -2.6634E+01 2.7641E+01 19 -1.3498E+01 2.8305E+00 -3.3287E+01 -1.6927E+01 20 -2.0593E+01 -8.5741E-01 2.0625E+01 1.2015E+01 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb 6.3149E+03 MEAN 1.5205E+04 9.9153E+03 I/2PP 5.1850E+03 COSINE SINE Nth COSINE SINE -8.6284E+03 4.9808E+03 01 -1.0229E+03 1.1576E+03 5.1420E+02 5.6618E+02 02 -2.8374E+03 -9.7245E+01 1.4102E+03 -1.5583E+03 03 5.8122E+02 -1.5100E+03 2.2869E+01 -2.5904E+02 04 5.3117E+01 5.8597E+01 4.4076E+02 3.0350E+02 05 -4.2799E+02 2.5616E+02 3.9529E+01 2.2936E+01 06 4.7907E+01 -1.8495E+02 -4.1816E+01 -2.6196E+01 07 1.3963E+02 2.2298E+02 -2.5790E+01 2.3925E+01 08 -7.4960E+01 -1.3076E+02 1.8429E+01 -5.6679E+01 09 2.9287E+01 -1.1847E+01 3.0833E+01 -6.5064E+01 10 -3.3109E+01 8.3781E-01 9.0951E+01 -2.0721E+00 11 6.6097E+00 -1.2381E+02 12 4.9759E+01 -1.2596E+02 2.3670E+01 -2.2797E+01 4.7520E+01 4.5654E+00 13 -5.0007E+01 -1.7455E+01 -1.5040E+01 1.7785E+01 14 5.0316E+00 -2.5900E+01 -1.3826E+01 8.3329E+00 15 1.6691E-01 -1.5405E+01 16 8.7309E+00 8.5112E+00 -1.1342E+00 1.2717E+01 17 1.9221E+01 -1.4008E+00 7.9876E+00 -1.4492E+01 18 3.0293E+01 6.6257E+00 8.6854E+00 2.0402E+00 5.8438E-02 -2.0038E+00 19 1.2874E+01 1.1822E+01 4.0758E+00 4.1627E+00 20 5.5012E+00 2.4516E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.5672E+04 3.4231E+03 8.8142E+03 I/2PP 3.2488E+03 Nth COSINE SINE COSINE SINE 01 -9.6840E+02 7.5765E+02 -6.2420E+03 4.8910E+03 1.1205E+03 2.9499E+02 02 -1.3147E+03 3.5103E+02 -2.2929E+02 -1.5515E+03 03 -5.1828E+02 1.2724E+03 04 1.0641E+02 -5.2578E+02 -1.1430E+03 -7.8962E+02 4.4893E+01 05 -8.8395E+02 2.6788E+02 1.5188E+02 3.1636E-01 06 7.4229E+01 -2.2930E+02 -5.6104E+00 07 2.0589E+02 3.1190E+02 -3.7163E+01 -4.1994E+01 5.8633E+01 8.5308E+01 08 -9.2570E+01 -1.9610E+02 -7.8454E+01 1.5998E+02 09 7.3295E+01 2.3483E+01 3.2990E+01 10 -3.5184E+01 2.0628E+00 -5.3388E+01 -4.3220E+01 11 -2.4423E+00 -4.3482E+01 -1.2397E+02 3.9221E+00 12 4.8961E+01 -1.0941E+02 7.2480E+00 13 -1.0535E+02 -5.0299E+01 -3.9626E+01 3.8112E+00 -1.8100E+00 -8.3488E+00 14 -1.3247E+00 -1.3130E+01 2.6952E+00 15 1.2798E+01 -2.7241E+00 -1.7949E+00 -3.7465E+00 16 3.1406E-01 -8.2956E+00 2.6688E+00 -3.1482E+01 17 2.8650E-01 -3.2374E-01 7.6004E+00 -1.7287E+01 18 7.1771E+00 1.1186E+00 4.3019E+00 19 -6.8320E-01 -3.8890E-01 1.5823E+01 9.9034E+00 -5.4809E+00 -5.9195E+00 20 -2.1000E+00 6.5136E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.1603E+04 -2.4530E+03 I/2PP 3.8592E+03 1.0842E+04 Nth COSINE SINE COSINE SINE 01 7.3102E+02 -6.7208E+02 -5.9902E+03 6.4141E+03 02 -6.9938E+02 9.0597E+02 1.4832E+03 1.3228E+02 03 -1.1565E+03 2.4940E+03 -1.9932E+03 -1.9920E+03 04 3.4934E+01 -7.2076E+02 -2.2674E+03 -1.4037E+03 05 -7.3510E+02 1.0184E+02 -5.1630E+02 -2.3631E+02 06 -1.0891E+01 -1.2806E+02 -3.9123E+01 -9.2827E+01 07 1.5340E+02 9.0339E+01 1.2681E+01 6.5358E-01 08 -2.9144E+01 -4.1651E+01 6.6287E+01 5.2295E+01 09 4.2415E+01 2.0311E+01 -9.6993E+01 2.3268E+02 10 8.2974E+00 2.7502E+01 -1.1110E+02 1.0714E+02 11 -1.8932E+01 9.2675E+01 -2.5392E+02 -7.8117E+01 12 -3.0832E+01 6.2098E+01 -2.8397E+01 1.6360E+01 13 -1.0049E+01 1.6022E+01 -1.2013E+02 1.2027E+01 14 -4.2791E+00 2.0877E+01 1.9839E+01 -3.1927E+01 15 1.2987E+00 1.6592E+01 1.3786E+01 -8.1616E+00 16 -9.2818E+00 -8.2427E+00 -2.3309E+00 -2.9754E+01 17 -1.7938E+01 1.0100E+01 -9.2700E+00 4.5724E+01 18 -2.5806E+01 -3.5940E-01 -6.3393E+00 5.7797E+00 19 -9.9864E+00 -3.9827E+00 -1.9832E+00 6.2568E+00 20 -6.9508E+00 1.8726E-01 -3.8065E+00 -3.5731E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 4.9159E+03 -1.5642E+03 1/2PP 5.5958E+03 9.4697E+03 Nth COSINE SINE COSINE SINE 01 2.2702E+03 -2.2294E+03 -4.7208E+03 4.0667E+03 02 -1.3949E+03 8.9229E+02 1.3166E+03 2.4986E+02 03 -7.9649E+02 2.2706E+03 -3.0981E+03 -1.2303E+03 04 -4.0015E+01 -3.4162E+02 -2.3108E+03 -1.4371E+03 05 1.3460E+02 -9.9707E+01 -1.3801E+03 -2.9851E+02 06 -1.0715E+02 5.7048E+01 4.4944E+01 -1.8016E+01 07 -9.3103E+01 -2.3526E+02 4.0197E+00 1.7995E+01 08 3.4192E+01 9.9107E+01 -6.8653E+01 -1.0651E+02 09 -5.5201E+01 -1.0243E+01 4.0823E+01 -7.6300E+01 10 -1.4699E+00 -2.0393E+01 8.5041E+00 1.7716E+01 11 1.9333E+01 1.0464E+01 -3.8751E+01 -5.1198E+00 12 -3.0692E+00 3.8478E+01 -1.8136E+01 2.5976E+01 13 7.3412E+01 1.3431E+01 -3.7629E+01 1.5172E+01 14 7.7529E+00 -9.7107E+00 1.1901E+01 -1.4070E+01 15 1.0794E+00 -1.2173E+01 7.9227E+00 3.0871E-01 16 7.1197E+00 6.2774E+00 6.7608E-01 -3.3813E+01 17 1.4486E+01 -7.4257E+00 -2.8244E+01 1.0603E+02 18 1.7737E+01 1.8528E+00 -1.0554E+01 4.6173E+01 19 7.7407E+00 6.6543E+00 -2.4120E+01 -2.1861E+01 20 3.7657E+00 2.7252E+00 7.8110E+00 1.2332E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb -5.6541E+03 MEAN 1.9168E+01 7.1872E+03 1/2PP 5.6018E+03 COSINE SINE Nth COSINE SINE 0362E+03 1.9169E+03 01 2.1849E+03 -2.2934E+03 -3.

4899E+02 1.2098E+02 02 -2.4598E+03 5.5720E+02 7.

6351E+03 -3.9557E+02 03 -6.2419E+02 1.2423E+03 -2.

7731E+03 -8.9908E+02 04 -9.2094E+01 4.5308E+02 -i.

2485E+03 -1.2446E+02 05 2.7051E+02 -6.1412E+01 -i.

2685E+01 -5.8279E+01 06 7.6379E+01 1.0232E+02 6.

07 -1.3109E+02 -3.0826E+00 i. 5572E+01 8.7270E+01 08 1.1167E+01 -3.2864E+01 -1. 6445E+02 -1.9565E+02 3266E+02 -2.5076E+02 09 8.3733E+00 -1.2939E+01 1.

4949E+01 -6.6245E+01 10 -1.5982E+01 -I.0336E+01 9.

0982E+02 5.6989E+01 11 -7.1547E+00 -8.0332E+01 2.

7393E+01 -4.4867E+01 12 2.7821E+01 -9.5597E+01 1.

1147E+01 -1.5178E+01 13 -8.8611E+01 -3.9495E+01 5.

4624E+01 1.5230E+01 14 -8.0629E+00 -3.4689E+00 -1.

3416E+00 4.9063E+00 15 -7.6367E-01 6.6122E+00 -6.

2810E+00 1.8679E+01 16 -3.6073E+00 -8.7811E-01 3.

1302E+00 -3.8183E+01 17 -6.4759E+00 7.8986E+00 5.

6691E+00 -1.0142E+01 18 -7.0793E+00 -1.2560E-01 3.

0354E+00 1.7948E+00 19 -7.6278E-01 -4.7118E+00 4.

3744E-01 2.4816E-01 20 4.2758E-02 -1.1186E+00 -3.

Edg.Bending @81%R, Flat.Bending @81%R, in-lb in-lb -5.8529E+03 MEAN -3.7915E+03 3.2950E+03 I/2PP 3.9709E+03 Nth COSINE SINE COSINE SINE 01 2.4186E+02 -7.8180E+02 -1.1033E+03 -8.7922E+01 -5.7332E+01 -4.5036E+01 02 -2.6822E+03 2.0386E+02 -1.2434E+03 -1.1696E+02 03 -5.4776E+02 3.4890E+02 -7.2195E+02 -2.9845E+02 04 -4.8445E+01 6.9953E+02 -6.0663E+02 -6.5972E+01 05 8.4719E+01 2.3308E+02 5.8144E+01 -9.4274E+01 06 6.5925E+01 -4.8444E+01 4.5375E+01 9.9849E+01 07 1.2591E+02 1.9474E+02 -I.0435E+02 -1.6213E+02 08 -9.2301E+00 -4.5343E+01 1.2830E+02 -1.8997E+02 09 2.2200E+01 3.6243E+01 10 6.1728E+00 8.5717E+00 9.3209E+01 -6.2663E+01 2.0409E+02 9.1732E+01 11 1.3109E+01 5.8355E+01 1.5808E+01 -1.3782E+01 12 -1.2927E+01 7.3989E+01 1.0448E+02 6.0308E+00 13 4.9344E+01 1.9631E+01 14 5.7755E+00 6.7092E-01 -1.3429E+01 2.4090E+01 15 3.6522E-01 -2.1233E+00 -5.4474E+00 -4.9557E-01 16 -4.5500E-01 -I.0286E+00 1.7114E+00 4.1415E+01 17 1.7662E+00 -5.3287E+00 3.2373E+01 -1.2029E+02 1.3231E+01 -5.1383E+01 18 2.4579E+00 -5.7856E-01 2.3701E+01 2.4201E+01 19 -5.0348E-01 2.4848E+00 20 -6.4414E-01 1.3285E-01 -1.1291E+01 -1.6088E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -1.4354E+03 -2.8453E+01 6.5739E+01 I/2PP 5.6150E+02 Nth COSINE SINE COSINE SINE 6985E+00 5.8153E+00 01 -9.2804E+00 -1.2984E+01 -7.

02 -5.9672E+01 1.7377E+01 4. 2106E+00 1.2162E+01 0976E+00 -2.4854E+00 03 -2.4704E+01 4.7512E+01 1.

1998E+01 1.2169E+01 04 2.9475E+02 -3.6945E+02 -4.

05 -9.4580E+00 -1.3345E+01 1. 2781E-01 -2.3984E-01 06 6.4036E+00 -1.0953E+01 -7. 8931E-01 -8.9169E-01 2797E-01 1.1782E-01 07 -1.8341E+00 7.6164E+00 -8.

08 -5.8535E+01 1.7982E+01 -2. 2441E+00 -6.6467E+00 09 6.0011E+00 -6.8103E+00 -7. 8673E-01 4.1716E-01 10 9.7021E+00 7.0138E-02 6. 2778E-02 3.5748E-01 11 2.9275E+00 6.5224E-01 4. 9064E-01 6.2491E-01 12 2.0450E+01 2.4953E+01 -1. 8946E+00 -1.2833E+00 13 2.1437E-01 6.9801E-01 -1. 4989E-01 9.5602E-02 14 2.8773E+00 1.3670E-01 -3. 3464E-01 5.9090E-01 15 4.1715E-01 5.4864E-01 3. 9533E-02 -1.1910E-02 16 -5.5563E+00 -6.2395E+00 5. 7324E-01 1.8185E+00 17 1.4934E+00 3.7385E+00 -8.

2226E-03 -3.5385E-02 18 1.2436E+00 2.5716E+00 -4. 2850E-01 6.0767E-02 19 2.0955E-02 1.0372E+00 -1. 0858E-01 3.2949E-01 20 -3.9611E+00 5.1219E+00 1. 2520E+00 3.3668E+00 Lateral Cyclic Load, Spider Arm Load, ib Ib MEAN -2.1736E+02 -7.0094E+01 I/2PP 1.0812E+02 2.7980E+02 Nth COSINE SINE COSINE SINE 01 -5.5383E+00 -1.8014E+00 1.7931E+02 3.2208E+01 02 4.0888E+00 -1.0215E+01 5.9818E+00 7.1003E+01 03 4.6615E+00 -2.9007E+00 -4.0697E+01 8.3305E+01 04 7.2036E+01 -2.2128E+01 1.6114E+01 -4.3170E+01 05 -9.1359E-02 3.2408E+00 -1.3139E+01 -1.2465E+00 06 -5.4875E-01 4.4584E+00 8.8067E+00 1.8894E+01 07 1.8777E+00 -6.4905E-01 -9.0660E+00 6.5991E+00 08 1.6208E+01 3.5335E+00 2.3300E+00 4.1368E+00 09 -5.2305E-01 7.7235E-01 2.8132E+00 -5.0181E-01 10 -1.9026E+00 5.6963E-01 3.1160E+00 1,3993E+00 11 -2.0695E-01 -1.1203E+00 2.7269E+00 -1.2593E+00 12 -1.7403E+00 1.3391E+00 2.1464E+00 -1.6748E+00 13 -4.7304E-01 -2.6380E-01 3.6414E+00 7.6670E-02 14 -6.7200E-01 -1.0574E+00 2.7234E+00 -1.7440E+00 15 2.3178E-01 8.3641E-02 -2.4109E-01 -1.4461E+00 16 1.3319E+00 -3.1595E+00 2.2222E-01 2.9165E+00 17 8.3276E-02 -3.0209E-01 3.4850E-01 9.8715E-01 -4.9149E-01 18 8.0629E-01 -6.4916E-01 -9.8361E-01 19 9.7950E-02 -4.8831E-01 -2.1993E-01 -6.5958E-01 20 5.3569E-01 -8.2596E+00 2.0924E-01 5.2818E-01 Lag Damper Load, Blade Feathering ib Angle, deg 5.7153E+02 MEAN 1.7421E+01 1.3802E+03 I/2PP 6.8502E+00 COSINE SINE Nth COSINE SINE -1.0576E+02 1.1970E+03 01 9.4126E-01 -6.8053E+00 1.4822E+02 -3.4237E+01 02 5.5799E-01 5.9601E-01 -9.9337E+01 -1.4553E+02 03 2.0859E-01 -2.0403E-01 -1.2783E+02 -6.2820E+00 04 -1.9766E-02 -I.0115E-01 8.3787E+01 -I.0034E+02 05 9.2418E-02 1.7917E-02 -3.0288E+01 -4.6320E+01 06 8.4689E-02 -2.5749E-02 1.9571E+01 1.3349E+01 07 -3.5923E-02 -3.4734E-03 2.9848E+01 7.6649E+00 08 4.9222E-02 3.4613E-02 -6.9381E+00 1.3133E+01 09 6.5772E-02 -2.4074E-02 -1.1370E+01 3.1186E+01 10 4.3006E-02 5.0332E-03 -1.0892E+01 -1.1922E+00 11 3.8160E-02 3.4058E-02 -9.0114E+00 -1.4235E+01 12 1.9696E-02 -2.6994E-02 -7.2019E+00 -6.1635E+00 13 2.0368E-02 -1.3621E-02 9.8795E+00 -7.6480E+00 14 1.1986E-02 -8.4797E-03 6.6915E+00 -7.7955E+00 15 2.3915E-02 -2.3781E-04 1.9253E+00 8.4082E+00 16 5.9314E-03 -7.0710E-04 -2.0540E+00 -1.8700E+00 17 2.1671E-03 1.1655E-02 -1.5698E+00 -3.1636E+00 18 2.6353E-03 3.7501E-03 -1.3457E+00 2.0762E+00 19 -3.4418E-04 1.9938E-04 20 -6.7190E-03 2.5976E-03 1.9636E+00 -8.3612E-01 MR Shaft Torque, in-lb MEAN 2.1815E+05 I/2PP 2.4863E+04 Nth COSINE SINE 01 1.7539E+03 1.8628E+03 02 9.7649E+03 8.0866E+03 03 1.7886E+02 8.5191E+02 04 1.0041E+04 8.3813E+03 05 -I.0188E+02 -2.3627E+02 06 1.1628E+03 1.4402E+03 07 -9.0960E+00 1.0655E+02 08 -3.9000E+02 -3.1628E+02 09 -4.0151E+01 -5.2349E+01 10 2.9784E+02 7.2238E+02 11 -8.6317E+00 -1.0967E+02 12 -1.6660E+02 2.8203E+02 13 -2.3006E+01 3.5996E+01 14 -3.5868E+02 -1.5487E+02 15 -5.1328E+00 3.0702E+01 16 -3.0292E+01 -5.7036E+01 17 8.2474E+00 7.0272E+01 18 -1.4992E+02 5.9115E+00 19 6.0939E+01 1.9316E+01 20 -1.6734E+01 7.2245E+00 Flight 503, Condition A Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 3.3389E+04 -1.2558E+03 1/2PP 1.1946E+04 2.8606E+04 Nth COSINE SINE COSINE SINE 01 6.6568E+03 6.2677E+02 -1.8815E+04 1.5562E+04 02 -2.9266E+03 3.0990E+03 2.1443E+03 1.4950E+03 03 2.2280E+03 -3.0092E+03 2.8821E+03 -4.8854E+02 04 2.4675E+03 4.7249E+01 1.9213E+02 7.6549E+01 05 -1.1039E+03 -3.7843E+02 9.9372E+02 -1.2345E+03 06 4.9587E+02 -4.8687E+02 -1.2481E+01 -3.0752E+02 07 4.7963E+02 2.3291E+02 -7.3534E+01 -1.9421E+02 08 -5.6576E+01 -1.8503E+02 -5.3443E+01 -7.1147E+00 09 1.3608E+02 -2.8790E+01 -3.3099E+02 4.8514E+02 10 1.9528E+01 1.6656E+02 1.0745E+02 6.0732E+01 11 -4.8729E+01 1.0259E+02 -1.1902E+02 3.3908E+02 12 -5.1914E+01 -8.3513E+01 -1.7841E+02 1.0376E+02 13 -1.9212E+00 1.6538E+02 1.9804E+01 9.0632E+01 14 9.9483E+00 6.3365E+00 7.9600E+00 -7.4520E+00 15 -3.1879E+01 -5.9744E+01 -2.7174E+01 -3.4734E+01 16 -1.5307E+01 -7.1475E+01 2.6418E+00 4.7567E+01 17 -1.3496E+02 -2.3674E+01 1.8129E+01 4.2902E+01 18 -5.1246E+00 -3.9219E+01 -7.5385E+01 -3.5702E+01 19 2.1686E+01 2.3022E+01 4.1092E+01 1.5148E+01 20 2.3880E+01 3.6646E+01 -9.6596E+00 -2.0009E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 2.2742E+04 2.6979E+03 1/2PP 4.6923E+03 1.2806E+04 Nth COSINE SINE COSINE SINE 01 3.1371E+03 -9.3877E+01 -1.1268E+04 5.3204E+03 02 -9.8793E+02 1.5866E+03 5.4086E+02 8.8522E+02 03 1.6022E+02 -2.4858E+02 1.2653E+03 -6.5327E+02 04 3.9373E+01 -7.6899E+01 1.1525E+02 -3.3868E+02 05 1.8740E+02 1.1823E+02 2.7188E+02 -1.3154E+02 06 -2.1861E+02 1.7274E+02 4.7207E+01 2.4162E+01 07 -2.4661E+02 -1.0730E+02 -I.0764E+02 -3.0980E+01 08 1.3186E+01 1.5101E+02 -1.1738E+02 6.1592E+01 09 -6.6379E+01 3.3153E+01 -7.3711E+01 8.3872E+01 10 -6.0277E+00 -1.1172E+02 2.6801E+01 -4.8403E+01 11 1.1215E+02 -7.6271E+01 -6.7315E+00 8.3109E+01 12 2.0639E+01 7.7862E+01 -3.4209E+01 4.6330E+01 13 1.1008E+01 -1.4552E+02 1.3756E+01 1.2681E+00 14 4.9033E+01 -1.6249E+01 2.5389E+01 1.7139E+01 15 2.8173E+01 7.2087E+01 -1.5544E+01 -2.7661E+00 16 1.4145E+01 6.7618E+01 -8.9548E+00 1.1677E+01 17 1.5362E+02 3.1878E+01 1.5210E+01 6.4922E+00 18 2.0011E+01 4.9248E+01 -4.5909E+00 4.1155E+00 19 -4.4548E+01 -2.5371E+01 -1.0078E+01 -1.1423E+01 20 -3.2977E+01 -4.3251E+01 -4.2935E+00 -I.0811E+01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb 9.6121E+01 MEAN 2.0223E+04 1.0489E+04 I/2PP 2.5748E+03 COSINE SINE Nth COSINE SINE -8.3200E+03 5.4748E+03 01 8.1955E+02 2.1930E+02 7.8509E+02 3.8344E+02 02 -6.0597E+02 7.1637E+02 2.3410E+02 -5.5823E+02 03 -4.2943E+02 4.4359E+02 6.9402E+01 -5.6745E+02 04 -7.0853E+02 -1.6997E+02 -1.1834E+02 3.6097E+01 05 4.9103E+02 2.2413E+02 3.6906E+01 2.5925E+01 06 -4.1318E+02 3.5926E+02 1.0467E+02 8.4415E+00 07 -3.5555E+02 -1.9537E+02 -5.0581E+01 4.6085E+01 08 4.5593E+01 1.4976E+02 1.1497E+02 -1.6880E+02 09 -7.2398E+01 -6.5586E+00 -3.8075E+01 1.6549E+01 10 -2.4341E-01 -1.2391E+02 4.2421E+01 -1.1785E+02 11 7.4084E+01 -9.2686E+01 2.5119E+01 -1.1379E+01 12 3.3015E+01 7.3744E+01 -1.4458E+01 -2.4704E+01 13 -1.3878E+01 -1.0708E+02 -4.4248E+00 -2.4170E+00 14 5.4720E+01 -5.4928E+00 2.8488E+00 8.7051E+00 15 1.8334E+01 3.0415E+01 4.6196E+00 -1.9362E+00 16 7.6353E+00 1.2417E+01 -1.8177E+01 -2.0589E+01 17 2.7998E+01 -7.7071E+00 3.8049E+01 1.2745E+01 18 1.2810E+01 1.0455E+01 -1.6885E+01 6.0090E+00 19 2.6676E-01 9.0799E-01 20 -1.2126E+00 1.9845E+00 -9.2158E-01 5.0598E+00 Flat. Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.3404E+04 -4.9549E+03 1.0824E+04 I/2PP 2.7390E+03 Nth COSINE SINE COSINE SINE -6.6902E+03 6.8715E+03 01 -1.1519E+02 -5.0400E+02 1.1923E+03 2.7027E+02 02 -7.1513E+02 -I.0435E+02 03 -9.7657E+02 7.4890E+02 -8.0891E+02 -5.1714E+02 04 -1.0011E+03 -1.7611E+02 1.1555E+02 -7.3025E+02 05 4.2793E+02 1.2306E+02 -5.8272E+02 2.1846E+02 06 -2.4674E+02 3.0005E+02 -9.7934E+01 6.9730E+01 1.6310E+02 3.6390E+01 07 -1.4703E+02 -9.1512E+01 1.0042E+02 1.9044E+01 08 8.5587E+01 -3.1624E+01 09 3.4703E+01 -1.0604E+01 2.0487E+02 -2.9786E+02 -7.8338E+01 3.8201E+01 10 -2.4416E+01 4.0630E+01 11 -6.9504E+01 -1.3448E+01 9.3717E+01 -2.4178E+02 9.1329E+01 -6.2894E+01 12 1.3609E+01 -3.6706E+01 -2.2097E+01 -5.3303E+01 13 -3.7083E+01 9.4437E+01 -1.0723E+01 -3.6317E+01 14 -3.4336E+01 1.3395E+00 4.4820E+01 4.6218E+01 15 -1.0447E+01 -6.1142E+01 8.0124E+00 -1.3232E+01 16 -9.2830E+00 -5.5914E+01 3.4122E+01 1.9134E+01 17 -1.3018E+02 -2.5472E+01 -1.4595E+01 1.2294E+00 18 -2.0050E+01 -4.2105E+01 8.1787E+00 3.4072E+00 19 3.8436E+01 2.0696E+01 5.7834E+00 -1.1838E+00 20 2.2938E+01 3.7386E+01 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 5.0800E+03 -2.6415E+03 1/2PP 3.3893E+03 7.8317E+03 Nth COSINE SINE COSINE SINE 01 -4.7659E+02 -1.5457E+03 -3.8712E+03 3.8798E+03 02 -1.3306E+03 -3.1809E+02 1.1633E+03 -1.2771E+02 03 -9.7759E+02 1.0545E+03 -1.5770E+03 -4.6761E+02 04 -3.7556E+02 4.8018E+01 1.0200E+02 -6.0897E+02 05 2.4179E+01 -4.1995E+00 -1.0736E+03 3.8457E+02 06 1.5262E+02 -8.0006E+01 -1.4852E+02 4.9460E+01 07 2.7668E+02 1.0968E+02 -4.2676E+01 1.1012E+02 08 -1.6809E+01 -1.2148E+02 2.1695E+02 -7.9663E+01 09 4.6484E+01 -4.3932E+01 -2.2371E+01 1.8231E+01 10 6.5220E+01 7.2460E+00 -8.8257E+00 1.1133E+01 11 7.7071E+00 6.4043E+01 -2.0985E+01 -8.6134E-01 12 -4.4068E+01 -2.6909E+01 7.3603E+01 -2.7796E+01 13 3.4313E+01 -1.9501E+01 -4.8385E-01 -1.9794E+00 14 2.1882E+01 -4.8856E+00 1.9997E+01 -2.4618E+01 15 2.6975E+00 5.1753E+01 4.0681E+01 4.1811E+01 16 -1.2745E+01 5.0194E+01 -1.0039E+01 -1.4364E+01 17 8.5106E+01 2.1663E+01 9.0679E+01 8.7731E+01 18 2.4375E+01 3.2176E+01 -9.6376E+01 -3.7836E+01 19 -2.0327E+01 -4.9942E+00 3.3201E+01 -1.9328E+01 20 -1.9057E+01 -2.1508E+01 -4.5764E+00 -1.8478E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -2.7796E+02 9.4536E+03 I/2PP 3.8130E+03 4.7572E+03 Nth COSINE SINE COSINE SINE 01 -5.7274E+02 -1.3568E+03 -1.6977E+03 4.8313E+02 02 -1.7795E+03 -1.9838E+02 1.4120E+03 -4.9712E+02 03 -8.0973E+02 9.5037E+02 -1.3563E+03 -2.5839E+02 04 3.7044E+02 1.4816E+02 1.0338E+02 -4.2865E+02 05 -1.5214E+02 -1.4409E+02 -9.9992E+02 3.2719E+02 06 1.2721E+02 -2.0347E+02 -7.7922E+01 4.2659E+01 07 2.2626E+01 9.5788E+01 -9.8915E+01 4.2342E+01 08 -5.1304E+01 5.9073E+01 1.6905E+02 -1.2281E+02 09 -6.6142E+01 2.0940E+01 -2.0745E+02 2.9305E+02 10 -4.6122E+01 -2.1615E+01 8.2919E+01 -I.0348E+02 11 6.0900E+01 -1.0924E+01 -5.1240E+01 1.6107E+02 12 3.4864E+01 6.9837E+01 -6.9519E+01 7.3840E+01 13 -3.2639E+00 -5.9384E+01 -1.6173E+01 3.1079E+01 14 8.8455E-02 1.8836E+01 3.9231E+01 5.0253E+00 15 -7.8190E-01 -1.8099E+01 -3.3161E+01 -1.4021E+01 16 1.9741E+01 -4.6479E+01 -1.9224E+01 1.5952E+01 17 -2.9544E+01 -2.4183E+01 -2.5300E+01 -3.0760E+01 18 -1.5203E+01 -1.4012E+01 3.2720E+01 -5.0511E+00 19 4.6249E+00 -6.4324E+00 -1.8940E+01 1.1630E+01 20 1.5475E+01 3.5645E+00 -1.4172E+01 1.2481E+00 Edg.Bending @81%R, Flat.Bending @81%R, in-lb in-lb -5.2400E+03 -4.8057E+03 MEAN 2.8586E+03 3.6155E+03 I/2PP COSINE SINE COSINE SINE Nth -7.5506E+02 2.3382E+02 -1.0999E+02 -2.6912E+02 4.3786E+02 -2.9219E+02 O2 -2.1570E+03 1.8769E+02 -9.8884E+02 -2.0348E+02 O3 -7.8639E+02 8.5289E+02 1.1616E+02 -5.2899E+01 O4 7.9169E+02 -8.1568E+01 -3.7000E+02 5.2968E+01 -1.4688E+01 -2.4799E+02 O5 -1.0901E+02 -6.3316E+01 O6 -2.4504E+01 3.9155E+01 -1.9421E+02 4.2349E+01 O7 -2.6118E+02 -1.0130E+02 1.0267E+02 -4.6625E+01 O8 -4.3973E+01 8.7102E+01 -1.7734E+02 1.8242E+02 09 2.3568E+01 1.0219E+01 7.1533E+01 -7.4124E+01 I0 2.8629E+01 1.8154E+01 -9.3465E+01 1.1620E+02 11 -7.2803E+01 -2.2153E+01 -1.0655E+02 2.3389E+01 12 -2.0329E+01 -6.4522E+01 -1.6011E+01 4.3457E+01 13 1.6426E+01 7.4227E+01 14 -1.1374E+01 6.9001E+00 7.4576E-01 3.1194E+01 -6.2058E+01 -5.3372E+01 -1.5740E+01 -1.5525E+01 -7.2602E+00 3.1145E+01 16 -6.3828E-01 7.8821E+00 -8.9207E+01 -6.5895E+01 17 2.4302E+01 2.5999E+01 1.0791E+02 4.9352E+01 18 4.2313E-01 1.6417E+01 -4.3423E+01 2.8916E+01 19 -1.1340E+01 -7.5203E+00 -5.9152E+00 2.2122E+01 20 -3.8933E+00 -I.0980E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib 9.5934E+01 MEAN -9.6813E+02 8.1964E+01 1/2PP 6.1922E+02 COSINE SINE Nth COSINE SINE 4.6894E+00 8.7261E+00 01 -1.9511E+01 -1.5299E+01 -2.4267E+00 1.0495E+01 02 -2.1209E+01 -2.4276E+01 -2.4379E-01 6.7107E-01 03 -3.6990E+01 -9.1782E+00 6.5609E+01 1.8525E+01 04 -4.3177E+02 1.4996E+02 -1.1205E+00 7.0487E+00 05 1.9254E+01 -5.3118E+01 2.2224E-01 -1.5348E+00 06 -1.8514E+00 1.8181E+01 -5.3544E+00 2.7597E+00 07 3.1666E+01 -1.4672E+01 1.3898E+00 6.7609E+00 08 4.8186E+00 1.0964E+01 -3.0592E+00 -5.9905E-01 09 1.6094E+01 2.3247E+00 3.8844E+00 -3.6613E+00 10 -2.6214E+01 1.4199E+01 -6.0115E+00 3.5345E+00 11 3.6761E+01 -1.5433E+01 -2.9445E+00 -4.7989E+00 12 -5.7958E+01 3.4249E+01 3.3126E-01 -2.3207E+00 13 -6.9815E+00 8.8822E+00 1.9031E+00 2.1806E+00 14 -3.3019E+00 -9.8456E+00 -9.1672E-01 -1.1106E+00 15 8.6043E-01 3.1439E+00 -4.7159E-01 -2.0477E+00 16 -6.9041E+00 1.6902E+00 4.1476E-01 -4.3019E-01 17 -4.0253E-01 3.2662E+00 -4.1175E-01 1.2079E+00 18 4.5762E-01 -6.7281E+00 4.4916E-03 -9.2280E-01 19 -2.8268E+00 4.1714E+00 -5.3712E-01 -5.8120E-01 20 -1.5955E-02 -6.8386E+00 Lateral Cyclic Load, Spider Arm Load, ib lb MEAN -1.5295E+02 -2.7289E+01 1/2PP 8.9765E+01 2.4647E+02 Nth COSINE SINE COSINE SINE 01 -7.3666E+00 -9.3695E-01 9.5161E+01 1.1648E+02 02 9.8636E+00 -3.9121E+00 4.2846E+01 -9.2562E+00 03 4.6942E+00 -1.0659E+00 1.5257E+01 -2.1223E+01 04 -5.4829E+01 -3.6536E+01 -3.1007E+01 1.5632E+01 05 -2.7715E+00 1.0073E+00 8.8695E+00 3.5093E+01 06 -1.4747E+00 -5.6548E-01 3.9814E+01 -1.4849E+01 07 3.0460E+00 -1.9772E+00 9.3315E+00 1.0055E-01 08 -6.6128E+00 -1.0649E+01 -1.1605E+00 -4.2220E-02 09 1.1942E+00 6.5771E-03 -2.2108E+00 4.0345E+00 10 -1.7503E+00 2.4817E+00 -2.2685E+00 -3.5894E+00 11 2.1111E+00 -1.7389E+00 1.7906E+00 5.0380E+00 12 6.6902E+00 -1.2030E+00 -8.7594E-01 -2.3229E+00 13 1.1821E+00 1.5085E+00 4.6230E+00 5.4827E-02 14 -2.3710E+00 -1.1966E+00 -1.9952E+01 3.8256E+00 15 1.1422E+00 6.5641E-01 -1.6898E+00 -2.3095E+00 16 3.5823E+00 3.9480E+00 2.2594E+00 2.6466E+00 -5.0796E-01 17 -6.1585E-01 -2.5045E-02 -7.0874E-01 18 1.5861E-01 -7.6774E-01 -2.1710E+00 -1.3646E+00 19 2.7427E-01 7.6806E-01 8.7612E-01 -1.2872E-01 20 7.7842E-01 1.5014E+00 5.8839E-02 1.1024E+00 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.5010E+01 5.0771E+02 I/2PP 3.7907E+00 1.3617E+03 Nth COSINE SINE COSINE SINE 01 1.4480E+00 -3.5859E+00 -9.4284E+01 1.3871E+03 02 3.8918E-01 4.6970E-01 1.7128E+02 7.3209E+00 03 2.8136E-01 -1.7102E-01 -8.1682E+01 2.7102E+01 04 -1.3929E-01 3.2692E-02 -2.5540E+01 4.4986E-01 05 1.3503E-01 -2.2116E-02 2.3407E+01 -8.5714E+01 06 2.7878E-02 -6.1004E-02 -2.4969E+01 -2.3492E+01 07 6.6640E-02 -4.6745E-02 3.4253E+01 -2.0076E+01 08 -1.1971E-02 2.3771E-02 1.5165E+01 5.2061E+00 09 -1.3736E-02 4.7419E-02 1.3326E+01 -1.0917E+01 10 -2.0253E-02 8.4294E-03 -5.4485E+00 2.0128E+01 11 -4.9868E-03 4.5178E-02 8.1673E+00 -1.5227E+01 12 -4.0660E-02 -8.1670E-03 -7.6351E+00 7.8416E+00 13 2.0651E-02 -3.1689E-04 -4.6342E+00 -3.0994E+00 14 -1.1572E-02 -7.2604E-03 -1.3755E+00 -6.5014E+00 15 -9.0616E-03 9.5134E-03 -5.9074E-01 -8.0225E-01 16 -2.9700E-03 1.4569E-02 5.4922E+00 9.1981E+00 17 5.7184E-03 9.2079E-03 -2.7146E+00 -5.5842E+00 18 -1.7747E-03 -1.0132E-02 7.4926E+00 2.2213E+00 19 1.3436E-03 -8.4172E-04 -2.8533E-01 6.6710E+00 20 4.3380E-03 -7.9745E-03 -4.2264E+00 -1.2149E+00 MR Shaft Torque, in-lb MEAN 1.7634E+05 I/2PP 8.1854E+03 Nth COSINE SINE 01 -4.1045E+02 6.0124E+01 02 2.4991E+03 -4.0927E+01 03 -7.0966E+02 7.8324E+02 04 2.1779E+03 3.6414E+03 05 -3.0376E+02 4.3396E+01 06 -1.5388E+03 1.4501E+03 07 -2.2557E+01 1.9449E+02 08 3.1519E+02 -4.9576E+02 09 6.1478E+01 9.1703E+01 10 -3.6989E+02 -4.7827E+01 11 9.4541E+00 -2.5000E+01 12 -1.3839E+02 -1.5060E+02 13 6.4030E+01 -7.7821E+01 14 -2.0440E+01 1.4975E+02 15 6.2129E+01 2.5904E+01 16 -6.1490E+01 -1.1227E+02 17 5.6455E+01 2.8457E+01 18 -3.3931E+01 2.8905E+01 19 -1.0617E+01 -1.2176E+01 20 5.2513E+01 3.5939E+00 Flight 503, Condition C Edg.Bending @6.8%R, Flat. Bending @3.2%R, in-lb in-lb -2.6402E+03 MEAN 3.2602E+04 2.8806E+04 I/2PP 9.2111E+03 COSINE SINE Nth COSINE SINE -1.7220E+04 1.7181E+04 01 -3.2331E+02 4.1175E+02 02 -4.0853E+03 2.0751E+03 2.0475E+03 1.4636E+03 03 2.3877E+03 -3.3259E+03 2.9182E+03 -3.3761E+02 2.7169E+02 3.8045E+02 04 1.8136E+03 -1.8356E+02 1.5367E+03 -8.2995E+02 05 4.7939E+02 -3.8875E+02 06 4.2470E+02 -9.1651E+02 1.0437E+02 -4.7509E+02 07 -1.0204E+02 -5.3948E+02 -2.9809E+01 -2.1358E+02 2.8085E+01 -2.2492E+01 08 1.3335E+02 -5.6654E+02 4.1670E+02 2.5142E+02 09 -2.2441E+02 -3.2245E+02 -1.1527E+03 3.8214E+02 10 -3.4222E+01 4.0161E+01 -2.2025E+02 6.4763E+02 11 -8.2561E+01 2.3908E+02 2.9817E+02 3.1950E+01 12 -3.7333E+02 1.7452E+02 13 9.7097E+01 3.4695E+01 8.6314E+01 4.5881E+01 1.4643E+01 6.7408E+01 14 -1.0164E+01 1.6293E+02 -8.7805E+01 4.6872E+01 15 -3.9144E+01 4.3039E+01 3.0826E+01 1.5361E+01 16 -5.2078E+01 -8.9247E+01 -1.8061E+02 8.4387E+01 17 3.5505E+02 -1.1485E+02 2.8465E+01 6.3620E+01 18 3.6335E+01 1.1092E+02 19 -3.4154E+01 2.7454E+01 4.6629E+00 7.8107E+01 1.4988E+01 -1.9492E+01 20 -4.0604E+01 -2.2009E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 2.2184E+04 1.9812E+03 1/2PP 2.7917E+03 1.3064E+04 Nth COSINE SINE COSINE SINE 01 3.0150E+02 -1.4641E+02 -1 .0860E+04 6.2924E+03 .7336E+02 8.5342E+02 02 -1.2525E+03 1.3168E+03 5 03 2.1456E+02 -3.0551E+02 1 .1665E+03 -7.5848E+02 04 7.2775E+01 -6.2551E+01 8 .2639E+01 -3.2214E+02 05 -2.0172E+02 2.6502E+01 4 .5668E+02 -1.3697E+01 06 -2.1845E+02 2.7169E+02 1 .2848E+02 -5.5646E+01 07 -4.0583E+01 5.0417E+02 -5 .5267E+01 -6.3296E+01 08 -1.1365E+02 3.6055E+02 -8 .7081E+01 6.1713E+01 09 9.4062E+01 1.6082E+02 3 .4034E+01 7.0517E+01 10 2.1425E+01 -2.9026E+01 -1 .9109E+02 6.0532E+01 11 8.9031E+01 -1.9899E+02 6 .2415E-01 1.1899E+02 12 2.6474E+02 -1.2861E+02 1 .1161E+02 -2.8932E+01 13 -4.3814E+01 -9.5081E+01 -5 .8727E+00 -8.3590E+00 14 -5.2734E+01 -1.1719E+02 2 .4657E+01 -2.6339E+00 15 2.1076E+01 -2.7568E+01 4 .8682E+00 -2.8342E+00 16 7.0378E+01 6.6913E+01 2 .1710E+00 4.9855E+01 17 -3.8736E+02 1.2287E+02 -4 .5617E+01 -4.8348E-01 18 -7.2275E+01 -1.3005E+02 -3 .1333E+00 -3.4349E+01 19 4.6946E+01 -3.6597E+01 9 .7251E+00 4.7103E+00 20 5.7275E+01 1.3082E+01 3 .6819E+00 -5.3290E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.9776E+04 -3.3393E+02 1/2PP 3.1755E+03 1.0638E+04 Nth COSINE SINE COSINE SINE 01 -7.6414E+02 2.3569E+02 -7.6000E+03 6.2043E+03 02 -6.9201E+02 6.2637E+02 8.6389E+02 4.1505E+02 03 -3.8133E+02 4.4547E+02 2.0265E+02 -6.0518E+02 04 -4.6842E+02 -1.1395E+02 -4.6918E+01 -6.9195E+02 05 -3.9267E+02 7.8489E+01 -1.1437E+01 -5.2442E+00 06 -3.9168E+02 5.4916E+02 5.2319E+01 -6.2939E+01 07 8.8685E+00 5.9484E+02 -5.2110E+01 -2.2227E+02 08 -1.1280E+02 3.9866E+02 -4.2763E+01 -3.8652E+01 09 1.3333E+02 2.1823E+02 -2.0270E+02 -1.1442E+02 10 1.0374E+02 -4.3648E+01 3.8177E+02 -1.4505E+02 11 9.6685E+01 -2.2707E+02 2.8444E+01 -2.1918E+02 12 2.2367E+02 -1.6942E+02 -6.9190E+01 7.8914E+00 13 -6.7060E+01 -3.3442E+01 -2.3827E+01 1.6833E+00 14 -4.1622E+01 -3.7411E+01 -7.7436E+00 -1.2672E+01 15 1.9902E+01 -2.7096E+01 2.6005E+01 -1.7762E+01 16 4.6807E+01 2.5118E+01 9.6030E+00 -3.9809E+00 17 -5.6032E+01 5.0420E+01 7.0279E+01 -4.1177E+01 18 -1.3605E+01 -2.4119E+01 -2.1325E+01 -2.2957E+01 19 -I.0870E+01 -4.4446E+00 -1.9279E+00 -4.1740E+01 20 -5.2225E+00 -4.5492E+00 1.7061E+00 6.9760E+00 Edg.Bending @31%R, Flat.Bending @31%R, in-lb in-lb -5.2365E+03 MEAN 1.3101E+04 1.0897E+04 I/2PP 2.9972E+03 COSINE SINE Nth COSINE SINE -6.2334E+03 7.5216E+03 01 -3.6805E+02 -5.3816E+02 1.2771E+03 3.5886E+02 02 -6.9154E+02 -5.5706E+01 -7.6486E+02 -5.4696E+02 03 -8.7051E+02 7.7427E+02 -4.9923E+01 -1.0438E+03 04 -6.6018E+02 -1.4831E+02 -7.3404E+02 -4.7312E+01 05 -3.3169E+02 1.3472E+01 -1.5328E+02 7.9502E+01 06 -2.4902E+02 3.7707E+02 1.1969E+01 -3.0719E+01 07 1.3438E+02 2.0613E+02 2.6465E+01 -4.6992E+01 08 4.1854E+01 7.6269E+01 -2.3550E+02 -2.1119E+02 09 2.5524E+01 -3.6285E+00 6.2361E+02 -2.0106E+02 10 8.4538E+01 -1.4024E+01 1.0263E+02 -4.1002E+02 11 -5.5341E+01 4.6575E+01 -1.5733E+02 1.7053E+01 12 -1.8177E+02 1.2792E+01 5.4190E+00 4.7094E-01 13 -1.3698E+01 5.9892E+01 -5.6100E+01 -3.2181E+01 14 1.1117E+01 8.9896E+01 1.2142E+01 5.2331E+00 15 -1.7445E+01 1.9096E+01 9.8295E+00 -7.8262E+01 16 -5.9846E+01 -5.9041E+01 -8.2118E+01 6.0171E+01 17 3.0353E+02 -9.6286E+01 -3.2970E+00 2.9109E+01 18 5.1163E+01 9.7599E+01 5.7129E+00 9.9199E+00 19 -2.6557E+01 2.8244E+01 1.5163E+01 8.8640E+00 20 -4.3237E+01 3.5639E-01 Edg.Bending @48%R, Flat.Bending @48%R, in-lb in-lb -2.8118E+03 MEAN 4.9750E+03 8.6720E+03 I/2PP 3.6579E+03 COSINE SINE Nth COSINE SINE -3.9824E+03 4.3428E+03 01 2.2174E+01 -1.7703E+03 1.1987E+03 6.8763E+01 02 -1.2827E+03 -2.9008E+02 03 -8.7634E+02 8.1326E+02 -1.5914E+03 -4.0603E+02 04 -3.1721E+02 2.2933E+01 6.7603E+01 -9.7701E+02 -1.4206E+03 2.2136E+01 05 7.2694E+01 -3.9061E+01 -2.9412E+02 2.2637E+02 06 1.3210E+02 -1.9229E+02 1.4415E+02 5.4561E+02 07 -5.1416E+00 -4.2712E+02 1.2368E+02 2.8879E+01 08 1.2849E+02 -3.3695E+02 8.1852E+01 -2.4220E+01 09 -4.6943E+01 -I.0535E+02 10 -1.0536E+02 1.9060E+01 -1.3983E+02 5.4798E+01 3.3798E+01 1.1795E+01 11 -4.0782E+00 8.0035E+01 -2.7666E+01 -2.7802E+00 12 3.0330E+01 9.4088E+01 1.1312E+01 -2.3280E+01 13 1.0017E+02 2.7902E+01 14 2.0476E+01 -1.7366E+01 -6.8965E+01 -1.8509E+01 -5.0371E+01 3.5464E+01 15 2.4033E+00 -1.2945E+01 16 3.7476E+01 4.4159E+01 -2.6920E+01 -3.6093E+01 17 -2.1695E+02 7.4722E+01 -3.3466E+02 1.1629E+02 18 -4.0664E+01 -6.6855E+01 2.5520E+01 4.0770E+01 7.6539E+00 9.6435E+01 19 2.2021E+01 -1.8010E+01 20 3.2781E+01 9.7000E+00 1.1428E+01 -1.6082E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -4.5456E+02 2.1947E+03 1/2PP 3.9147E+03 6.0323E+03 Nth COSINE SINE COSINE SINE -2.0935E+03 1.7119E+03 01 6.3697E+01 -1.5811E+03 1.1886E+03 -2.6643E+02 02 -2.0517E+03 -2.5145E+02 03 -6.9887E+02 8.8593E+02 -1.6833E+03 -2.8612E+02 04 2.0423E+02 7.3223E+01 1.3270E+02 -5.4541E+02 -1.1513E+03 -3.2775E+01 05 1.5997E+02 7.8410E+01 06 1.8517E+02 -1.3970E+02 -2.7670E+02 1.3255E+02 1.7662E+02 7.4628E+02 07 -6.6508E+01 -9.3360E+01 08 -1.0946E+02 1.0241E+01 1.2550E+02 1.2532E+02 09 -2.2960E+01 5.5332E+01 3.5083E+02 1.8973E+02 10 6.8565E+01 5.1548E+01 -6.3739E+02 1.9020E+02 11 4.9502E+01 -6.7366E+01 -4.9028E+01 3.0749E+02 12 7.5334E+01 -1.1491E+02 1.7054E+02 -4.7807E+01 13 -1.1944E+02 -1.0202E+02 -9.2385E+00 -1.7364E+01 14 -2.8713E+01 -3.2979E+01 2.3320E+01 2.0255E+01 15 -1.8764E-01 2.6562E+01 -3.4792E+00 -9.9064E+00 16 -2.8015E+01 -1.1758E+01 2.0211E+01 5.1255E+01 17 1.0254E+02 -3.9478E+01 1.0886E+02 -4.7812E+01 18 3.2131E+01 2.0810E+01 2.0558E+00 -2.4322E+01 19 -2.6719E+00 1.0769E+01 -4.8278E+00 -1.9487E+01 20 -2.7918E+01 -7.1441E+00 -1.1882E+01 2.6081E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.8433E+03 -5.0056E+03 1/2PP 4.1672E+03 3.1970E+03 Nth COSINE SINE COSINE SINE 01 1.2155E+02 -4.6147E+02 -7.6144E+02 2.2213E+02 02 -2.3096E+03 5.5197E+01 4.8394E+02 -2.7227E+02 03 -7.5656E+02 7.3341E+02 -1.0299E+03 -2.5664E+02 04 7.5102E+02 2.6072E+01 1.0324E+02 -1.4160E+02 05 1.7145E+02 -1.6704E+02 -3.8165E+02 -2.4237E+01 06 -1.2573E+02 8.9132E+01 -1.4417E+02 -3.4320E+01 07 -3.3367E+01 4.3361E+02 -1.5869E+01 5.4669E+02 08 -1.6616E+01 2.4689E+02 3.1649E+01 2.2213E+02 09 4.7772E+01 -1.1018E+01 3.0863E+02 2.3067E+02 10 -1.3510E+01 -6.0493E+01 -4.7170E+02 7,1898E+01 11 -4.4390E+01 3.8637E+01 -8.3425E+01 2.4068E+02 12 -6.5810E+01 5.6513E+01 1.0216E+02 -8.7510E+00 13 8.2390E+01 6.0894E+01 2.3130E+01 4.6660E+01 14 2.2774E+01 5.7046E+01 1.0125E+02 5.3422E+01 15 -1.4652E+01 -1.4593E+01 4.9718E+01 -5.4783E+01 16 1.0854E+01 -3.2757E+01 2.3732E+01 3.8322E+01 17 -2°8733E+01 2.0050E+01 3.1527E+02 -1.3566E+02 18 -1.4492E+01 2.2139E+01 -4.8371E+01 -3.9910E+01 19 -1.4581E+01 3.9217E+00 -9.7119E+00 -9.7611E+01 20 5.5566E+00 -1.6508E+01 -1.5523E+00 1.3432E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib 9.9085E+01 -I.0690E+03 1.3457E+02 9.9550E+02 COSINE SINE Nth COSINE SINE 01 -5.2064E+00 -2.8648E+01 9.0006E-01 1.1109E+01 02 -2.5538E+01 -2.6458E+01 -1.3738E+00 9.6852E+00 03 -3.7279E+01 -9.6206E+00 2.3358E-02 3.7894E-01 04 -6.9462E+02 3.3673E+02 8.7380E+01 -1.6359E+01 05 1.2054E+01 -1.2728E+01 -1.5900E+00 -7.7229E-01 1.5476E-01 -1.9740E+00 06 -9.9198E+00 1.2032E+01 07 3.2365E+01 -1.4097E+00 -4.6188E+00 1.0795E+00 08 -4.6808E+01 -4.4998E+01 1.1167E+01 -5.7007E+00 09 -5.2196E-01 1.1175E+01 7.0201E-01 -2.2793E+00 10 -1.6791E+01 -2.0710E+01 2.1753E+00 3.9071E+00 11 1.3929E+01 2.2703E+01 -9.8311E-01 -5.3577E+00 3.4161E+00 -1.2177E+01 12 -8.1934E+01 1.2556E+02 13 -2.6598E+00 -6.6010E+00 2.8923E+00 1.7687E+00 14 8.8313E+00 3.5296E+00 -2.4994E+00 -1.3672E-01 -4.1253E-02 -1.2897E-01 15 -6.5011E-01 3.6620E+00 4.0821E+00 -1.9623E+00 16 2.2395E+00 -6.5349E+00 17 -3.5576E+00 -4.6126E-01 2.7243E-01 1.4007E-01 18 2.8937E+00 3.7377E+00 -4.6998E-01 -1.7220E+00 19 -3.0516E-01 -8.1297E-01 5.5615E-01 -3.0476E-01 20 3.0158E+00 -I.0314E+01 -3.4828E+00 -9.1232E-01 Lateral Cyclic Load, Spider Arm Load, ib ib -1.7760E+02 -3.6313E+01 MEAN 9.2846E+01 3.2080E+02 I/2PP Nth COSINE SINE COSINE SINE 01 -7.4670E+00 3.0341E+00 1.2215E+02 1.2054E+02 02 1.0230E+01 -2.9864E+00 5.1857E+01 -8.8213E+00 03 3.2722E+00 1.0633E+00 -I.0459E+01 -1.3485E+01 04 -3.9335E+01 -2.9376E+01 -5.0982E+01 3.6172E+01 05 -1.8633E+00 3.1866E+00 2.2439E+01 4.9609E+01 06 1.6496E+00 6.8345E-01 4.3274E+01 -1.6819E+01 07 -5.3592E-01 -1.4041E+00 -1.5956E+01 -1.5163E+01 2.4283E+01 -7.0637E+00 1.5929E+00 08 -3.7137E+00 09 -2.0477E-01 1.5132E+00 -6.0745E-02 1.5430E+00 10 9.1647E-01 -9.1958E-01 -3.7833E+00 3.2236E+00 11 -1.0643E+00 1.2343E+00 -2.1352E+00 4.1116E+00 12 7.6792E+00 -6.4309E+00 4.1470E+00 4.9077E+00 13 -3.9915E+00 6.1991E-01 2.8032E+00 7.5335E-01 14 5.0678E-01 -1.3294E+00 1.1430E+01 -1.5216E+01 15 5.6685E-01 2.6506E-01 1.0548E+00 1.6607E+00 16 -9.1248E+00 2.5569E+00 -3.8001E+00 3.4408E+00 17 -1.5104E-01 -6.7940E-02 2.7046E+00 -2.1691E+00 18 1.2668E+00 7.4318E-01 4.0720E+00 2.6968E+00 19 -1.2108E+00 7.2235E-01 2.3025E-01 2.8833E-01 20 3.0693E+00 1.5498E+00 -1.2922E+00 6.2720E-01 Blade Feathering Lag Damper Load, lb Angle, deg 1.4909E+01 5.0669E+02 4.4670E+00 1.3732E+03 Nth COSINE SINE COSINE SINE 01 1.4661E+00 -4.0256E+00 5.8237E+01 1.4068E+03 02 4.0963E-01 4.5683E-01 1.7834E+02 -1.1388E+01 03 1.9479E-01 -1.4335E-01 -3.5714E+01 7.0110E+01 04 -2.0870E-01 1.2194E-01 -1.9132E+01 -1.6064E+00 05 2.1101E-01 6.6005E-02 1.2049E+01 -9.2310E+01 06 4.3820E-02 -7.2065E-02 -3.5918E+01 -2.6454E+01 07 -1.2633E-02 -9.6390E-02 -4.3369E+00 -4.3030E+01 08 -9.3752E-03 1.1031E-02 1.4332E+01 -9.4255E+00 09 5.3065E-02 2.8780E-02 -7.2256E+00 -1.1290E+01 10 -1.0653E-01 3.2612E-02 2.9871E+01 -6.9163E+00 11 -4.1369E-02 6.9234E-02 -1.2204E+01 -1.9894E+01 12 1.4990E-02 8.7861E-03 6.9361E+00 -2.7541E+00 13 9.4860E-03 -1.0723E-02 -1.8432E+00 7.1950E-02 14 1.1215E-02 -1.9699E-02 -8.3881E+00 5.0802E+00 15 8.0394E-03 5.3771E-03 -4.1646E+00 -2.8644E+00 16 -1.7251E-03 6.4753E-03 1.5100E+01 -3.0490E+00 17 -2.4323E-02 1.2727E-02 1.5454E+00 -1.8257E+00 18 -9.2973E-03 -1.6518E-04 -6.6859E+00 -5.8431E-02 19 -3.9774E-03 6.1946E-03 -1.4305E+00 -8.8478E+00 20 3.9737E-03 -1.2156E-02 2.3363E+00 -5.0926E-01 MR Shaft Torque, in-lb 1.6767E+05 MEAN 1/2PP 1.2175E+04 Nth COSINE SINE 01 8. 2041E+02 3.6185E+02 02 3. 8369E+03 2.6604E+03 03 -1. 6591E+02 3.8174E+02 04 2. 6304E+03 6.4277E+03 05 -2. 6114E+02 9.5127E+01 06 2. 1936E+02 1.1773E+03 07 -4.

1061E+01 5.1807E+02 08 3. 2589E+02 -5.8769E+02 09 -4. 0113E+01 5.1364E+01 10 -1. 7377E+02 1.6036E+02 11 6. 1578E+01 -2.9577E+01 12 -3. 1516E+02 1.1776E+03 13 1. 4723E+01 -1.1930E+01 14 -1. 1808E+02 2.3057E+01 15 -8. 9285E+00 -4.0761E+01 16 -1. 0620E+02 -1.5515E+02 17 -2. 9706E+01 2.2249E+01 18 4. 8592E+01 4.8387E+01 19 3. 4400E+01 -1.1503E+01 20 -2. 6722E+01 7.9670E+01 Flight 503, Condition E Edg.Bending @6.8%R, Flat.Bending @3.2%R, in-lb in-lb -6.6943E+02 MEAN 3.1410E+04 3.0134E+04 I/2PP 1.3999E+04 COSINE SINE Nth COSINE SINE -1.7899E+04 1.8413E+04 01 -5.1449E+03 4.6972E+02 2.2498E+03 1.5126E+03 02 -5.1982E+03 -7.7256E+02 03 4.7626E+03 -3.1320E+03 3.5056E+03 5.2347E+02 04 2.0293E+03 5.7158E+02 2.0314E+02 7.2877E+02 05 4.6700E+02 7.6920E+02 1.8968E+03 3.6822E+02 3.7026E+02 -5.6108E+02 06 1.1070E+02 -2.5021E+02 -5.8326E+01 -4.1420E+02 07 2.4468E+02 -6.5302E+02 -1.0730E+02 -4.5430E+00 08 5.1101E+02 2.2376E+02 -3.9402E+01 -4.0060E+01 09 3.0522E+01 -4.4839E+02 -4.0601E+02 -1.3071E+03 10 1.5257E+02 -1.0022E+02 -3.4139E+02 -5.3718E+02 11 3.1074E+01 -9.0231E+01 2.7124E+01 2.1220E+02 12 -1.3324E+02 -2.3122E+02 -1.6208E+01 -1.2615E+02 13 1.4689E+02 -3.4903E+02 14 8.7624E+01 -1.1422E+01 1.9300E+01 5.7535E+01 2.7807E+01 7.1841E+01 15 4.3665E+01 5.0052E+01 2.2941E+01 -7.8663E+01 16 -4.9651E+01 7.9659E+01 -3.4977E+01 9.4504E+01 17 6.9880E+01 -2.1196E+02 18 1.2162E+01 8.6164E+01 7.5644E+01 -2.3250E+01 1.7810E+01 -5.6115E+00 19 -2.5704E+01 -1.2374E+01 2.7707E+01 5.7171E+00 20 -3.9265E+01 -8.0316E+00 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb MEAN 2.1500E+04 3.0756E+03 1.3972E+04 I/2PP 3.3976E+03 Nth COSINE SINE COSINE SINE 01 -1.5866E+03 -1.0334E+02 -1.1561E+04 6.9233E+03 02 -1.5978E+03 6.4770E+02 6.1927E+02 8.2921E+02 03 5.4682E+02 -3.6480E+02 1.4341E+03 -6.4304E+02 04 8.5484E+01 -5.0671E+01 1.1560E+02 -3.1693E+02 05 -8.6918E+01 -3.3068E+02 4.8232E+02 2.5963E+02 06 -7.9722E+01 2.2821E+01 2.1129E+02 -3.2615E+01 07 -2.8770E+02 3.8582E+02 -3.2293E+01 -1.0763E+02 08 -3.1203E+02 -1.7930E+02 -1.3271E+02 -8.0694E+01 09 -8.7225E+01 6.7446E+01 -3.3901E+01 2.2081E+01 10 -7.7686E+01 1.3308E+02 -1.0361E+02 -1.6593E+02 11 -9.7449E+01 1.2033E+02 -6.2837E+01 -7.9123E+01 12 1.3141E+02 1.3986E+02 2.0114E+01 4.8868E+01 13 -8.3562E+01 1.9089E+02 -4.8876E+01 -2.4472E+01 14 -8.3096E+01 -7.4760E+00 2.8603E+00 -3.4911E+01 15 -5.0916E+01 -8.4501E+01 2.2569E+01 -6.3407E+00 16 4.8362E+01 -6.1252E+01 2.5410E+01 -2.6165E+01 17 -6.1473E+01 1.8656E+02 -2.2423E+01 1.8648E+01 18 -3.6026E+01 -8.3454E+01 -7.7164E+00 -1.9130E+01 19 3.8016E+01 -1.2969E+01 7.1401E+00 9.2820E+00 20 5.1362E+01 5.2132E+00 5.2479E+00 1.3214E+01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.9452E+04 5.0894E+02 1.1106E+04 1/2PP 3.9245E+03 Nth COSINE SINE COSINE SINE 01 -1.8984E+03 3.2830E+02 -7.8026E+03 6.6552E+03 02 -8.2552E+02 4.4156E+02 9.2163E+02 4.3902E+02 03 -5.6680E+02 3.1975E+02 3.9752E+02 -6.1684E+02 04 -4.8111E+02 -3.9514E+02 1.7032E+02 -9.6373E+02 05 -2.4889E+02 -6.2409E+02 -9.3473E+01 7.6056E+01 06 -1.7517E+02 1.0504E+02 3.4692E+01 3.5654E+01 07 -2.7926E+02 5.5425E+02 6.4512E+01 -1.2121E+02 08 -4.0695E+02 -2.0691E+02 -1.3221E+02 -5.1510E+01 09 -9.7464E+01 2.1001E+02 6.7003E-01 -1.7078E+01 10 -4.3921E+01 1.9551E+02 1.7969E+02 4.0646E+02 11 4.3794E+01 1.4742E+02 1.0604E+02 1.6344E+02 12 1.4851E+02 1.2552E+02 -1.0122E+00 -5.1946E+01 13 -7.4688E+01 2.2979E+02 -3.7740E+00 4.8369E+01 14 -2.4282E+01 -5.7075E+01 -2.0531E+01 -2.3848E+01 15 -3.1163E+01 -1.8885E+01 -2.7248E+01 -1.6043E+01 16 1.5571E+01 -8.7544E+00 -5.7730E+00 -4.1528E+00 17 -9.1710E+00 7.0604E+01 7.8276E+00 -2.6824E+01 18 -7.9786E+00 -1.8786E+01 -2.8416E+01 -1.6660E+00 19 6.3273E-01 1.0504E+01 -1.0214E+01 6.2808E+00 20 2.6275E+00 -1.1488E+01 1.3282E+00 -1.0299E+01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.3080E+04 -4.3109E+03 1/2PP 2.9205E+03 1.1787E+04 Nth COSINE SINE COSINE SINE 01 -5.9099E+02 -4.7009E+02 -6.4169E+03 7.9678E+03 02 -6.9608E+02 1.2679E+02 1.2674E+03 3.0228E+02 03 -1.2279E+03 5.4282E+02 -6.6162E+02 -7.4109E+02 04 -6.7385E+02 -5.7781E+02 4.1092E+02 -1.5608E+03 05 -3.0734E+02 -5.5459E+02 -8.3689E+02 -3.9124E+02 06 -1.9492E+02 7.6498E+01 -2.3739E+02 1.2379E+02 07 5°8920E+01 2.6416E+02 2.4487E+01 1.7212E+02 08 -7.1195E+01 2.9196E+01 -4.8837E+01 9.9430E-01 09 2.7138E+01 9.6071E+01 5.2222E+01 -4.7136E+01 10 9.6771E+01 2.7953E+01 2.7363E+02 6.3151E+02 11 1.7038E+02 2.5666E+01 1.7722E+02 3.2188E+02 12 -3.8481E+01 -5.7388E+01 -1.5690E+01 -1.1782E+02 13 6.5689E+01 -5.5108E+01 6.4952E+01 1.4235E+02 14 6.5282E+01 -1.6946E+01 -3.4333E+01 1.6693E+01 15 2.0048E+01 6.8954E+01 -5.1985E+01 -9.4041E+00 16 -4.4752E+01 4.0922E+01 -2.0409E+01 2.9386E+01 17 6.3133E+01 -1.3939E+02 2.3662E+01 6.1156E+01 18 2.9123E+01 7.7587E+01 2.5229E+01 -6.1082E+00 19 -3.6210E+01 7.3667E+00 4.6457E+00 -9.5242E+00 20 -3.6136E+01 -1.2916E+01 5.6565E+00 -2.4694E+01 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 5.1305E+03 -2.3728E+03 I/2PP 3.5063E+03 9.9347E+03 Nth COSINE SINE COSINE SINE 01 4.3097E+02 -1.9139E+03 -4.1841E+03 4.7174E+03 02 -1.3469E+03 -2.3418E+02 1.1851E+03 4.5252E+01 03 -1.2432E+03 5.1541E+02 -1.7958E+03 -8.4346E+02 04 -3.6421E+02 -1.7641E+02 5.3225E+02 -1.3735E+03 05 -5.2529E+01 6.0504E+00 -1.4111E+03 -7.2131E+02 06 6.8926E+01 4.3975E+01 -3.9313E+02 1.6264E+02 07 2.0152E+02 -2.6874E+02 -1.3613E+02 5.9473E+02 08 3.1451E+02 9.5947E+01 3.6083E+02 1.0358E+02 09 1.0743E+02 -1.0428E+02 8.9062E+01 -5.3059E+01 -4.3964E+01 -1.3840E+02 10 -5.6145E+01 -9.2991E+01 1.2215E+01 7.8104E+01 11 -1.1742E+02 -1.3427E+02 -1.1937E+01 -1.5618E+01 12 -5.2470E+01 -7.4716E+01 13 1.7765E+01 -9.4485E+01 8.9136E+01 1.1299E+02 14 -2.6722E+01 4.6727E+01 2.6998E+00 4.5002E+01 15 -2.9017E+00 -4.4546E+01 1.1870E+01 5.3574E+00 16 4.3826E+01 -1.8288E+01 -3.4608E+00 3.1195E+01 17 -3.9907E+01 1.1082E+02 -3.2531E+01 1.5924E+02 18 -3.6309E+01 -4.9102E+01 7.9720E+01 -1.9116E+01 19 3.0929E+01 -1.5036E+01 3.1675E+01 3.6170E+00 20 3.3523E+01 2.5244E+01 3.3763E+00 8.3490E+00 Edg.Bending @64%R, Flat.Bending @64%R, in-lb in-lb MEAN -4.4235E+02 8.9412E+02 6.5614E+03 I/2PP 4.2445E+03 Nth COSINE SINE COSINE SINE 01 5.0927E+02 -1.7203E+03 -2.1047E+03 2.1090E+03 02 -2.4003E+03 -4.3812E+02 1.2268E+03 -2.6494E+02 03 -9.7687E+02 7.7668E+02 -1.9546E+03 -8.3574E+02 04 2.6531E+02 2.4489E+02 4.3140E+02 -7.5704E+02 05 1.1627E+02 3.5936E+02 -1.0823E+03 -6.2950E+02 06 9.9446E+01 6.0976E+00 -2.8040E+02 4.9656E+01 07 3.0221E+01 -1.1752E+02 -1.6753E+02 6.2775E+02 08 -5.3663E+01 -4.6453E+01 3.6767E+02 -3.6411E+00 09 -7.5198E+01 -6.8236E+01 -5.3423E+01 1.7115E+01 10 3.0688E+01 6.1339E+01 -2.9797E+02 -6.2947E+02 11 -1.3949E+00 1.2971E+02 -1.2205E+02 -1.6534E+02 12 5.7188E+01 1.3396E+02 5.1197E+01 1.0258E+02 13 -8.2429E+01 1.3802E+02 -4.8558E+01 -2.8325E+01 14 2.3351E+01 -2.9789E+01 2.4088E+01 -6.0562E+01 15 -1.6169E+01 2.0158E+01 9.3591E+00 1.5028E+01 16 -2.4133E+01 -6.1727E+00 1.3976E+01 -3.6071E+01 17 3.3437E+01 -5.3110E+01 -1.0990E+01 -5.8371E+01 18 2.4933E+01 2.5986E+01 -1.5029E+01 -6.6181E+00 19 -2.3733E+01 1.1861E+01 -1.8038E+01 9.7824E+00 20 -2.5750E+01 -1.9556E+01 -1.5060E+00 -4.4951E-01 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.8099E+03 -4.7887E+03 1/2PP 4.1837E+03 3.1761E+03 Nth COSINE SINE COSINE SINE 01 1.7208E+02 -5.2330E+02 -7.1757E+02 3.0135E+02 02 -2.5461E+03 -3.0545E+02 4.6280E+02 -2.3498E+02 03 -8.6241E+02 4.3037E+02 -1.1068E+03 -5.7229E+02 04 8.3645E+02 4.3246E+02 2.1618E+02 -2.1960E+02 05 3.6966E+02 1.4448E+02 -3.8872E+02 -1.7471E+02 06 -1.0194E+01 -2.2151E+02 -5.0245E+01 -6.3391E+01 07 -3.7025E+02 1.8552E+02 -2.3535E+02 3.2579E+02 08 -2.5125E+02 -1.4144E+01 1.0973E+02 -1.4057E+01 09 3.8481E+00 1.3543E+02 -1.0425E+02 1.2436E+02 10 -6.9728E+00 -1.3561E+01 -1.8203E+02 -4.8594E+02 11 1.1746E+00 -4.8339E+01 -6.1796E+01 -2.0205E+02 12 -3.8175E+01 -8.8120E+01 3.3071E+01 3.8583E+01 13 6.5841E+01 -8.6466E+01 -8.0121E+01 -1.4050E+02 14 -3.0474E+01 2.0122E+01 1.2346E+01 -6.5070E+01 15 -1.4172E+01 1.9313E+00 -8.8764E+00 3.8106E+01 16 2.5324E+01 3.0324E-01 1.3843E+01 -4.2877E+01 17 8.4918E+00 3.4183E+01 1.5776E+01 -1.4184E+02 18 -2.1850E+01 -5.4008E+00 -7.9569E+01 9.9962E+00 19 -6.9671E+00 -9.8692E+00 -3.0213E+01 1.0945E+01 20 2.1241E+01 3.5692E-02 1.6444E+01 -1.6271E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -1.2984E+03 1.1889E+02 I/2PP 1.1211E+03 1.3128E+02 Nth COSINE SINE COSINE SINE 01 -1.8173E+01 -4.2042E+01 2.7750E+00 1.1758E+01 02 -1.4684E+01 1.2263E+01 -5.5551E+00 7.8355E+00 03 -4.2640E+01 1.1347E+01 3.0573E+00 -9.8674E-01 04 -9.7382E+02 3.5004E+02 9.9447E+01 -1.9281E+01 05 7.7973E+00 -7.5591E+00 1.5392E+00 -1.5671E+00 06 -5.3714E+01 1.6471E+01 5.6646E+00 -4.5171E+00 07 2.4252E+01 1.1418E+01 -3.0805E+00 -1.0863E+00 08 -1.7404E+01 2.1330E+01 1.1341E+01 -1.1487E+01 09 6.1705E+00 -1.2553E+00 2.1655E-01 1.2020E-01 10 6.7392E+00 -7.2262E+00 -2.6568E+00 4.6914E+00 11 -2.5024E+01 -2.1758E+01 3.7789E+00 5.5632E+00 12 -2.7267E+01 -1.4905E+02 -5.4104E+00 -1.9239E+00 13 1.6277E+01 8.3179E+00 -2.4644E+00 1.6988E+00 14 -9.6474E+00 -4.8898E-01 3.3029E-01 -2.7054E+00 15 -3.9357E-02 5.4338E+00 -1.2221E+00 1.1653E-01 16 8.8287E+00 1.2800E+01 -2.9621E+00 -5.1530E+00 17 4.7675E+00 2.4865E+00 2.8299E-01 -1.1339E-01 18 -6.7134E+00 -6.6713E+00 4.5567E-02 -3.1446E-01 19 3.2126E+00 3.1240E+00 -I.0201E-01 -6.1163E-01 20 3.5844E+00 4.2787E-01 1.6864E+00 2.9401E+00 Lateral Spider Arm Load, Cyclic Load, ib ib -2.0849E+02 -5.3764E+01 1.1050E+02 3.7182E+02 SINE Nth COSINE SINE COSINE 1.5384E+02 6893E+00 1.2843E+02 01 -5.8291E+00 i.

1.6895E+01 8432E+00 5.8206E+01 02 1.2613E+01 -4.

4309E+00 -3.4997E+01 -1.1450E+00 03 2.0446E+00 -3.

4.0027E+01 0610E+01 -7.4902E+01 04 3.2551E+00 -5.

6.3121E+01 6546E+00 9.7305E-01 05 -3.4457E+00 4.

1.4716E+01 2381E+00 3.1577E+01 06 4.6838E+00 4.

-1.7618E+01 1120E+00 -1.4288E+01 07 3.3890E-01 -2.

3900E+01 -8.5680E-02 3.6021E+00 08 -9.0704E+00 2.

1.9187E+00 09 -1.0972E+00 9. 1308E-01 3.0122E+00 -9.7034E+00 10 2.2463E+00 -4. 5064E+00 -1.5835E+01 -1.1013E+01 11 3.6969E-01 -1. 3258E+00 -1.6245E+01 8.5139E+00 12 1.2235E+01 4. 2056E+01 -6.2622E+00 -1.0822E+01 13 -1.0298E+00 -6. 2459E+00 -5.9463E+00 1.9631E+01 14 1.9224E+00 3. 9220E+00 -4.2451E+00 2.0673E+00 -1.2525E+00 15 8.5785E-01 -2. 8665E+00 -3.5527E-01 -4.6537E+00 16 1.2840E+00 -3. 3339E+00 -2.3270E+00 17 -3.4348E-01 -7. 7788E-01 -7.9087E-02 -4.0026E-01 18 1.1274E+00 1. 4390E+00 6.8595E-01 5.2967E-01 19 -3.7163E-01 -1. 4001E-01 -1.3900E+00 2.3612E+00 20 -6.4222E-01 -3. 9988E+00 -1.5031E+00 Blade Feathering Lag Damper Load, ib Angle, deg 5.1910E+02 MEAN 1.5457E+01 1.3996E+03 I/2PP 4.7572E+00 Nth COSINE SINE COSINE SINE 01 1.8994E+00 -4.2366E+00 1.1747E+02 1.4448E+03 02 4.1463E-01 6.3244E-01 2.0087E+02 -3.7401E+01 03 1.9775E-01 -7.9639E-02 6.5194E-02 1.1964E+02 04 -2.7034E-01 1.5312E-01 8.9788E+00 -3.5551E+01 05 1.5955E-01 1.7447E-01 3.6160E+01 -4.7845E+01 06 5.7160E-02 -3.3804E-02 -3.0970E+01 -4.4900E+01 07 -8.8883E-03 -1.2099E-01 8.7435E+00 -3.4293E+01 08 -4.3083E-02 1.9397E-02 -4.1043E+01 3.1771E+00 09 1.5922E-02 -5.4229E-03 -9.9315E+00 -3.0531E+00 10 -6.3488E-02 -9.4124E-02 2.3746E+01 1.4969E+01 11 -8.4601E-02 -1.0844E-01 -7.0627E+00 2.7062E+00 12 -1.6620E-02 1.9143E-02 1.2035E+01 1.1351E+01 13 -4.5447E-03 -5.8513E-02 -5.2893E+00 1.2250E+01 14 -1.2859E-02 2.9319E-02 -8.3681E+00 7.4193E+00 15 1.2136E-02 1.1258E-02 -1.2219E+01 4.6333E+00 16 -5.7956E-03 -7.7544E-03 -1.0386E+00 -1.1498E+01 17 -1.5683E-02 1.3917E-03 -3.1671E+00 2.4522E+00 18 -2.4877E-03 -4.8340E-03 -1.7479E+00 -3.5438E+00 19 7.2999E-03 -7.6810E-03 -2.6584E+00 -3.0379E+00 20 5.8820E-03 7.0395E-03 7.4255E+00 -3.5833E+00 MR Shaft Torque, in-lb MEAN 1.8040E+05 1/2PP 1.7893E+04 Nth COSINE SINE 01 1.0353E+03 -1.1913E+00 02 4.1509E+03 6.7752E+03 03 -4.7494E+02 4.5383E+02 04 5.2333E+02 1.0268E+04 05 -1.8746E+02 -2.9721E+02 06 -4.4167E+01 1.8380E+03 07 -2.4397E+01 3.1572E+02 08 1.4480E+03 5.0406E+02 09 -5.0437E+00 -1.0713E+02 10 3.1865E+02 4.8196E+02 11 -4.1163E+01 -5.8747E+01 12 -7.7033E+02 2.6422E+02 13 1.5186E+01 -1.3984E+02 14 -2.0605E+02 1.9367E+02 15 4.3860E+01 -1.2045E+02 16 1.4105E+02 2.3580E+02 17 -1.3412E+01 -1.6759E+02 18 -4.0008E+01 -1.2869E+02 19 2.9738E+01 -4.3518E+01 20 -5.7452E+01 5.5606E+01 Flight 503, Condition F Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 3.1668E+04 8.0813E+02 1/2PP 1.8959E+04 3.2275E+04 Nth COSINE SINE COSINE SINE 01 -4.0250E+03 9.8892E+02 -1.5635E+04 2.2477E+04 02 -6.2069E+03 -1.3260E+03 2.7737E+03 1.3535E+03 03 3.8255E+03 -5.6576E+03 4.1725E+03 -7.7315E+02 04 3.0780E+03 -1.5613E+03 4.6498E+02 8.1300E+02 05 1.2869E+03 6.4001E+02 2.3229E+03 -1.5004E+01 06 2.7480E+02 -3.2452E+02 6.1186E+02 -6.9837E+02 07 -3.3092E+01 -9.9825E+02 -2.3346E+02 -4.7113E+02 08 1.0228E+03 -3.5349E+01 -1.3099E+02 1.0153E+02 09 -2.5460E+02 -4.5173E+02 3.5444E+02 1.3338E+02 10 -1.7019E+01 -1.2031E+02 -7.4751E+02 -814829E+02 11 -1.4851E+02 -1.4197E+02 -4.7297E+02 -6.4412E+02 12 4.5545E+02 -3.5280E+01 2.7505E+01 -1.9674E+02 13 -5.1163E+02 1.3990E+02 -2.3928E+02 6.7908E+01 14 -2.2121E+02 -1.9091E+02 1.3827E+01 1.3765E+02 15 4.0282E+01 -I.0197E+02 1.1233E+02 -7.6555E+01 16 1.9458E+02 8.5266E+00 -1.2592E+02 -1.2023E+02 17 -3.6247E+02 -1.5311E+02 1.3987E+02 4.0343E+00 18 3.5568E+01 -1.6321E+02 -1.0602E+02 -1.7469E+02 19 6.1000E+01 3.8551E+01 -1.1778E+02 1.7721E+01 20 -3.2841E+01 9.2649E+01 8.4153E+01 -1.7933E+01 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb 3.7886E+03 MEAN 2.1434E+04 1.5217E+04 1/2PP 4.3355E+03 COSINE SINE Nth COSINE SINE -1.1223E+04 9.7034E+03 01 -1.1489E+03 -2.6216E+01 7.8602E+02 9.2844E+02 02 -1.5999E+03 6.0453E+02 1.2424E+03 -1.2817E+03 03 4.3674E+02 -6.4825E+02 -6.8760E+01 -3.3487E+02 04 5.0270E+01 -1.1535E+02 6.3875E+02 1.1442E+02 05 -3.8517E+02 -2.6123E+02 06 -1.7979E+02 3.1741E+01 2.4887E+02 -1.5087E+02 07 -2.2119E+02 6.9181E+02 -7.1656E+01 -1.2213E+02 -2.2679E+02 -1.5908E+01 08 -6.6647E+02 -3.8639E+01 09 -1.2840E+02 2.1236E+01 -4.9306E+00 1.7257E+01 -8.2273E+01 -6.6944E+01 10 8.7936E+01 8.3180E+01 -1.1302E+02 -1.2405E+02 11 3.0483E+00 2.6345E+02 -6.9721E+01 -1.1078E+02 12 -3.8239E+02 -8.6587E+01 2.6378E+01 7.6215E+00 13 3.8051E+02 -1.4514E+02 -1.9794E+01 7.0783E+01 14 1.5881E+02 5.9211E+01 9.7191E+00 4.0955E+00 15 -5.0308E+01 1.1562E+02 16 -1.7995E+02 4.0243E+01 -5.4630E+01 -8.3282E+01 17 3.7434E+02 1.4479E+02 2.1990E+01 2.6851E+01 18 -9.5853E+00 2.2226E+02 -1.7153E+01 3.9190E+01 19 -5.1564E+01 -2.4633E+01 -2.2615E+01 -2.1931E+00 20 3.7393E+01 -1.0257E+02 5.3123E+01 -3.8885E+01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.9488E+04 1.0001E+03 1/2PP 4.7797E+03 1.2438E+04 Nth COSINE SINE COSINE SINE 01 -1.6138E+03 5.8837E+02 -7.2328E+03 8.5422E+03 02 -8.1413E+02 5.2483E+02 1.0975E+03 3.5793E+02 03 -4.8254E+02 5.9251E+02 2.1766E+02 -9.1582E+02 04 -8.6626E+02 1.1110E+02 -1.4939E+02 -1.2070E+03 05 -8.3336E+02 -5.5580E+02 -1.7072E+01 3.1171E+01 06 -3.4403E+02 1.7157E+02 6.0993E+01 4.4649E+01 07 -1.6380E+02 8.8726E+02 9.1410E+00 -1.7529E+02 08 -7.9972E+02 2.6984E+00 -1.1109E+02 8.3624E+01 09 -3.3721E+01 2.2886E+02 -1.8202E+02 -5.7508E+01 10 1.0586E+02 1.4838E+02 2.7095E+02 2.4950E+02 11 1.7689E+02 1.8605E+02 1.5977E+02 2.3224E+02 12 -3.0001E+02 1.0362E+01 -3.5027E+01 2.8799E+01 13 3.6771E+02 -1.2101E+02 5.8671E+01 -3.5812E+01 14 2.8738E+01 -6.3886E+01 -4.5607E+00 -2.7949E+01 15 -4.6471E+01 4.8241E+01 -3.7597E+01 3.5954E+01 9.3734E+00 1.3246E+01 16 -3.1263E+01 3.3336E+01 17 9.4091E+01 2.0004E+01 -6.5095E+01 -1.5559E+01 18 1.2568E+01 5.0112E+01 5.1941E+01 7.9046E+01 19 -3.6070E+00 -1.0884E+01 3.7580E+01 -1.2973E+01 20 5.3084E+00 -4.9667E+00 -4.3271E+01 1.8299E+01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb -3.9591E+03 MEAN 1.3111E+04 1.3477E+04 1/2PP 3.8965E+03 Nth COSINE SINE COSINE SINE 01 -5.3297E+02 -4.1211E+02 -5.3554E+03 9.4897E+03 02 -8.1430E+02 4.2065E+02 1.5364E+03 -6.2898E+01 03 -1.0650E+03 1.1278E+03 -9.1224E+02 -7.5663E+02 04 -1.0973E+03 1.0162E+02 -1.4357E+01 -2.1107E+03 05 -7.8776E+02 -5.2746E+02 -1.0609E+03 -3.0910E+02 06 -3.0862E+02 2.1429E+02 -2.8294E+02 2.8218E+02 07 8.7398E+01 3.1799E+02 8.9477E+01 1.7873E+02 08 -9.0921E+01 1.2281E+02 1.8989E+01 1.0132E+02 09 8.3644E+01 1.7923E+02 -1.6412E+02 -1.4509E+02 10 -2.8832E+00 3.3287E+01 3.6640E+02 3.7304E+02 11 1.2108E+02 -1.4552E+02 3.3099E+02 4.7234E+02 12 2.2092E+02 1.0957E+02 -1.3871E+01 2.0838E+02 13 -1.6426E+02 4.3212E+01 9.8884E+01 -I.0543E+02 14 -1.3289E+02 -1.0050E+02 5.6514E+01 -9.9618E+01 15 3.2284E+01 -8.1902E+01 -4.9660E+01 3.4442E+01 16 1.6385E+02 1.1816E+01 5.8592E+01 1.7239E+02 17 -3.1609E+02 -1.1458E+02 1.2526E+02 -7.0079E+00 18 -1.8621E+00 -1.9655E+02 -7.1729E+00 -2.5374E+01 19 4.1356E+01 1.5918E+01 -1.3335E+00 2.2625E+00 20 -3.3926E+01 8.7106E+01 -4.6594E+01 2.5140E+01 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 5.0548E+03 -2.1018E+03 I/2PP 3.9987E+03 1.0977E+04 Nth COSINE SINE COSINE SINE 01 2.3902E+02 -1.9749E+03 -3.5638E+03 5.7137E+03 02 -1.6352E+03 2.0446E+02 1.3610E+03 -4.2005E+02 03 -I.0479E+03 9.6012E+02 -2.3147E+03 -4.1351E+02 04 -4.4394E+02 -1.6768E+01 2.1707E+02 -1.9712E+03 05 -1.0740E+02 -8.3111E+01 -1.9084E+03 -5.4592E+02 06 8.6036E+01 -3.8377E+01 -5.2851E+02 4.3060E+02 07 2.1419E+02 -4.9771E+02 1.3405E+02 7.4296E+02 08 5.8363E+02 -4.1729E+01 3.5061E+02 -1.3884E+02 09 1.2723E+02 -2.4164E+02 1.6339E+02 -1.5445E+02 10 2.8189E+01 -1.0259E+02 -1.3583E+02 -6.4550E+01 11 -1.3246E+02 -2.0957E+01 3.2740E+01 2.4362E+01 12 7.3610E+01 -5.7114E+01 3.1279E+01 1.8936E+02 13 -9.4842E+01 5.4604E+01 6.0922E+01 -4.7140E+01 14 7.9978E+01 7.8702E+01 9.0365E+01 -2.1058E+01 15 1.1515E+01 5.1171E+01 1.1674E+01 -4.6816E+01 16 -1.1407E+02 -7.6532E+00 5.9714E+00 1.3611E+02 17 2.1566E+02 9.2410E+01 3.1496E+02 1.1449E+02 18 7.1636E+00 1.5525E+02 -1.0845E+02 -1.5927E+02 19 -2.7254E+01 1.3953E+01 -9.4821E+01 -1.4175E+00 20 4.3757E+00 -5.6330E+01 9.5678E+01 -3.5596E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb -4.9236E+02 1.2102E+03 7.3690E+03 4.2701E+03 COSINE SINE Nth COSINE SINE -1 .9999E+03 2.8135E+03 01 4. 5145E+02 -1.8254E+03 1 .2119E+03 -7.4330E+02 02 -2. 7884E+03 1.2712E+02 -2 .5323E+03 -3.1458E+02 03 -6. 6068E+02 8.9403E+02 04 4. 1548E+02 6.3205E+00 3 .5977E+02 -1.2754E+03 -1 .5975E+03 -5.1143E+02 05 3. 7916E+02 3.4475E+02 -3 .9470E+02 2.5267E+02 06 1. 5305E+02 1.7959E+00 8 .3208E+01 7.7624E+02 07 -2. 4531E+01 -1.8879E+02 1 .9847E+02 -2.8268E+02 08 -4. 5223E+01 -2.7941E+01 .4107E+02 7.9613E+01 09 -1. 7835E+02 -1.5325E+01 2 -3 .7407E+02 -3.1464E+02 10 -4. 3046E+01 1.7840E+01 11 1. 6617E+01 1.3218E+02 -i .3937E+02 -3.6625E+02 -2 .5376E+01 -9.4070E+01 12 -2. 6767E+02 -2.6555E+01 4 .3410E+01 -6.3065E+00 13 2. 2378E+02 -5.2060E+01 -5 .6519E+01 1.7839E+01 14 -7. 9441E+00 -6.6722E+01 2 .0160E+01 -1.1118E+01 15 -I. 3586E+01 -1.3161E+01 16 4. 9024E+01 2.4394E+01 -2 .9138E+01 -9.1591E+01 .2412E+02 -3.4161E+01 17 -9. 8817E+01 -6.8783E+01 -I 18 1. 0882E+01 -1.0107E+02 2.7056E+01 3.1171E+01 19 2. 0077E+01 -1.1574E+01 2.1414E+01 3.8797E+00 20 -9. 1611E+00 3.9917E+01 1.5653E+01 1.4496E+01 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb -4.8593E+03 -4.8399E+03 MEAN 4.4910E+03 3.6614E+03 1/2PP COSINE SINE Nth COSINE SINE -6.8795E+02 5.9352E+02 01 4. 1953E+01 -5.4120E+02 4.4869E+02 -3.8874E+02 02 -2. 8943E+03 2.5052E+02 03 -7. 1045E+02 4.4903E+02 -1.3979E+03 -2.7339E+02 3.0452E+02 -5.1819E+02 04 I. 0736E+03 -3.0430E+00 -5.1114E+02 -1.9205E+02 05 6. 0280E+02 1.7948E+02 -1.3427E+02 -4.2766E+01 06 -2. 4758E+01 -1.9472E+02 -1.3488E+02 5.0682E+02 07 -2. 9684E+02 4.4245E+02 08 -4. 1705E+02 9.0645E+01 -6.4470E+01 -1.6016E+02 09 8. 1027E+01 1.6143E+02 1.7437E+02 2.5052E+02 -2.1367E+02 -2.7142E+02 10 5. 2160E+01 4.5142E+01 -4.5979E+02 11 3. 3355E+01 -8.4418E+01 -7.4765E+01 1.2321E+01 -2.0640E+02 12 2. 0240E+02 3.0800E+01 -1.1945E+02 3.1878E+01 13 -1. 3410E+02 1.7498E+01 -1.5806E+02 6.5782E+01 14 3. 6152E+00 2.8307E+01 8237E+00 1.7190E+01 1.7803E+01 3.8361E+01 15 3.

-2.6750E+01 -1.8611E+02 16 -2. 1939E+01 1.0088E+00 -3.3392E+02 -1.0062E+02 17 4. 9725E+01 6.2386E+00 18 i. 0764E+01 3.9681E+01 1.0676E+02 1.9731E+02 19 -6. 2295E+00 2.2699E+01 9.7657E+01 2.5275E+00 20 -6. 8470E-01 -9.0809E+00 -9.6382E+01 2.6964E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib -1.5598E+03 1.6429E+02 1.6874E+03 1.8898E+02 Nth COSINE SINE COSINE SINE 01 3.3096E+00 -4.4419E+01 1 .2358E+00 1.5402E+01 02 -5.5827E+01 3.7240E+01 -3 .7580E+00 8.9004E+00 03 4.0157E+00 -1.4407E+00 -2 .1496E+00 3.2514E+00 04 -1.0527E+03 1.2474E+03 9 .6008E+01 -1.1105E+02 05 -5.8926E+01 7.0761E+00 4 .9493E+00 -2.3682E+00 06 -3.1263E+01 2.6794E+01 3 .0447E-01 -9.5682E+00 07 1.7816E+01 3.3431E+01 -2 .5379E+00 -3.5841E+00 08 1.4726E+02 -6.6805E+01 1 .2354E+00 -1.7433E+00 09 -6.2617E-01 2.1985E+01 1 .2875E+00 -1.4224E+00 10 -9.6536E+00 -2.0734E+01 6 .8110E-01 8.6126E+00 11 7.1036E+00 3.3655E+01 3 .1514E+00 -5.6665E+00 12 -7.5559E+01 -2.9121E+02 -8 .3273E-01 3.7554E+01 13 1.1312E+01 -1.9510E+01 -1 .9689E+00 3.5223E+00 14 -3.9599E+00 9.0350E+00 -2 .9494E+00 -2.6713E+00 15 3.8745E+00 4.5791E+00 5 .9721E-01 7.7272E-01 16 1.9494E+01 2.8090E+00 -1 .6493E+01 -7.4133E+00 17 4.2726E+00 -3.6409E+00 -9 .7626E-01 -2.1953E+00 18 -1.1509E+00 2.0145E+00 1 .4433E+00 1.4497E+00 19 -1.1343E+00 4.7074E+00 -9 .2049E-01 -1.0938E+00 20 3.3608E+01 2.6208E+00 1 .0540E+01 2.8973E+00 Lateral Cyclic Load, Spider Arm Load, Ib ib MEAN -2.3149E+02 -7.7084E+01 I/2PP 1.7976E+02 4.6754E+02 Nth COSINE SINE COSINE SINE 01 -1. 0150E+01 6.7705E-01 1.5485E+02 1.7906E+02 02 1.

4221E+01 -8.8571E+00 7.7378E+01 3.0612E+01 03 -1.

8035E+00 -3.1654E+00 -4.9097E+01 4.3342E+01 04 2.

3857E+01 -1.0966E+02 -7.2085E+01 1.0240E+02 05 3. 5716E+00 1.8718E+00 3.0756E+01 7.9926E+01 06 9. 9755E+00 6.2881E+00 6.2155E+01 -4.4125E+00 07 -3. 3862E+00 -6.3197E+00 -1.0699E+01 -7.2639E+00 08 -2. 3736E+00 2.8053E+01 6.2766E+00 2.7804E+00 09 -1.

0210E-01 -8.1351E-01 1.2925E+00 -9.0568E+00 10 1.

5627E+00 -4.9501E+00 -2.1284E+01 2.1528E+00 11 -4. 6010E+00 1.3396E+00 -2.8174E+01 2.9896E+00 12 3. 9193E+01 1.7359E+01 1.8985E+00 1.5907E+00 13 -1. 1274E+00 1.8747E+00 -2.1909E+01 1.3100E+01 14 3.

5972E+00 -1.1489E+00 3.1314E+01 3.8020E+01 15 1. 3189E-01 -6.1133E-01 4.8097E+00 8.0284E-01 16 -2. 9812E+00 -2.0208E-01 -8.4058E+00 -5.3625E+00 17 7.

0611E-01 2.2740E-01 -4.0795E+00 -9.0302E-01 18 -9. 0892E-01 -1.4513E+00 -2.9038E+00 -6.9251E+00 19 1.

4040E+00 6.7367E-01 -3.3215E-01 1.4364E-01 20 -1 • 4951E+01 -3.9134E+00 -2.4806E+00 1.1320E-01 Blade Feathering Lag Damper Load, Ib Angle, deg 5.2066E+02 1.5811E+01 1.3954E+03 5.4610E+00 COSINE SINE Nth COSINE SINE 4.2514E+02 1.4028E+03 01 1.5548E+00 -4.9249E+00 2.2227E+02 -9.2601E+01 02 6.7247E-01 5.4751E-01 9.9088E+01 1.1837E+02 03 2.0068E-01 -4.1291E-02 -5.3515E+01 04 -2.6993E-01 3.5490E-01 2.2841E+01 -4.8553E+01 05 2.5675E-01 2.3478E-01 3.8627E+01 -1.6258E+01 -1.3789E+01 06 9.8783E-02 -6.0241E-02 -1.8166E+01 -3.7829E+01 07 -4.7797E-02 -1.0612E-01 -2.8513E+01 5.2654E+01 08 -1.2380E-02 3.6940E-03 -2.2427E+01 2.1124E+01 09 9.6558E-03 -1.4472E-02 1.2488E+01 -5.2431E+00 10 -6.6273E-02 -4.1968E-02 1.5596E+01 2.7780E+01 11 -1.1429E-01 -4.1275E-02 12 -1.8532E-02 -6.5391E-02 -1.8095E+01 3.1044E+00 -5.6056E+00 13 -8.0781E-02 1.4746E-02 3.7622E+00 14 2.6413E-02 4.8009E-02 3.9189E+00 -1.1012E+01 -2.9734E-01 8.1592E+00 15 2.4485E-02 -1.3187E-02 -1.7235E+01 -3.2649E+00 16 -3.0176E-02 -1.2246E-02 -2.8240E+00 -4.2769E+00 17 1.5280E-02 2.0043E-02 9.2075E+00 8.4320E+00 18 -3.6455E-03 -1.3336E-04 -6.1839E-01 7.9265E-01 19 -1.3518E-02 -2.8694E-03 -9.3056E+00 3.2070E+00 20 8.4924E-03 5.1589E-03 MR Shaft Torque, in-lb 1.8727E+05 MEAN 1.8608E+04 I/2PP Nth COSINE SINE 01 8.8599E+02 -6.2626E+02 02 6.2394E+03 6.3077E+03 03 -5.4916E+02 6.1084E+02 04 4.7506E+03 1.0480E+04 05 -3.8621E+02 7.2154E+01 06 6.8594E+02 1.8543E+03 07 1.4600E+02 2.8024E+02 08 1.7495E+03 -8.9442E+02 09 4.1726E+01 -1.3143E+02 10 3.8895E+02 8.1073E+02 11 2.5980E+01 6.5588E+01 12 5.4112E+02 -8.0458E+01 13 4.2517E+01 3.1713E+00 14 -2.5501E+02 1.6182E+02 15 -5.2110E+01 1.6642E+01 16 1.7034E+02 3.6729E+01 17 6.4926E+01 3.1886E+01 18 -5.1412E+02 4.1397E+01 19 -2.8437E+01 3.5975E+01 20 -4.3890E+01 1.6524E+02 Flight 503, Condition G Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 3.2287E+04 7.0371E+03 I/2PP 2.2933E+04 3.8042E+04 Nth COSINE SINE COSINE SINE 01 -1.1414E+03 1.9017E+03 -1.5051E+04 2.7854E+04 02 -8.9083E+03 -2.4225E+03 3.4046E+03 1.0568E+03 03 3.6818E+03 -7.7263E+03 4.5962E+03 -1.9584E+03 04 3.1307E+03 -2.7950E+03 5.8604E+02 3.6139E+02 05 1.6809E+03 5.6413E+02 2.1834E+03 -6.2729E+02 06 5.8979E+02 -4.6371E+02 7.4726E+02 -1.1052E+03 07 2.5616E+02 -I.0809E+03 -4.6347E+02 -4.8884E+02 08 1.0868E+03 -2.2776E+02 -1.0655E+02 8.2799E+01 09 -5.2892E+01 -5.5283E+02 7.2550E+02 2.4564E+01 10 2.1249E+02 1.9219E+02 -3.2556E+02 -7.6906E+02 -9.1032E+02 -5.0362E+02 11 -1.8182E+02 9.5192E+01 12 3.0144E+02 -1.0403E+03 -3.8611E+00 2.1294E+02 13 -9.2146E+01 4.0904E+02 -1.7325E+02 3.0861E+02 14 -2.3643E+02 -1.0448E+02 2.5212E+02 1.6852E+02 15 -9.3107E+01 -9.5214E+01 1.0541E+02 -1.0427E+02 16 7.8917E+01 -4.8434E+01 -1.7171E+02 -1.1369E+01 17 -4.4802E+02 2.2102E+02 7.8888E+01 -1.9341E+02 18 -1.5361E+02 -2.6624E+02 -4.1695E+02 -1.8323E+02 19 4.2811E+01 -1.3280E+02 -1.2000E+02 -6.7749E+01 6.7978E+01 3.4803E+01 20 1.1358E+02 1.6100E+00 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 2.1346E+04 7.1600E+03 I/2PP 4.3279E+03 1.8623E+04 Nth COSINE SINE COSINE SINE 01 1.4876E+02 2.2450E+01 -1.1863E+04 1.3463E+04 02 -1.9553E+03 5.4377E+02 1.0827E+03 1.1181E+03 03 4.3404E+02 -9.3612E+02 1.0463E+03 -1.6441E+03 04 -1.2081E+01 -1.5255E+02 -1.2745E+02 -3.0750E+02 05 -5.2928E+02 -2.2698E+02 5.8389E+02 1.2003E+01 06 -3.1453E+02 1.5870E+02 2.8174E+02 -1.4126E+02 07 -3.4050E+02 7.8155E+02 -9.5710E+01 -1.1692E+02 08 -7.7715E+02 7.2804E+01 -2.2511E+02 9.1281E+01 09 -3.1501E+02 2.2625E+01 2.5186E+01 5.7064E+00 10 2.3343E+01 -5.9495E+01 6.5725E+00 -9.5903E+01 11 1.2261E+02 1.9501E+02 -1.9031E+02 -4.0324E+01 12 -3.7002E+02 5.9358E+02 -1.3040E+02 1.0586E+02 13 6.4440E+00 -3.8351E+02 -3.3100E+01 5.3021E+00 14 1.1758E+02 -4.3027E+01 7.1585E+01 6.6116E+00 15 7.2770E+01 1.1068E+02 -2.1588E+00 -1.4460E+01 16 -8.1926E+00 8.5649E+01 -8.9978E+01 -3.8061E+01 17 4.6002E+02 -2.5550E+02 2.7963E+01 -1.0559E+01 18 2.6109E+02 3.0272E+02 1.5726E+01 6.8037E+01 19 9.8802E+00 1.1745E+02 -3.5923E+01 3.4202E+01 20 -7.2030E+01 -8.0928E-01 -8.9225E+00 2.1293E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb 3.2099E+03 MEAN 1.9771E+04 1.5093E+04 I/2PP 5.3523E+03 Nth COSINE SINE COSINE SINE 01 -8.2567E+02 9.3586E+02 -7.4753E+03 1.1087E+04 02 -8.5015E+02 6.2460E+02 1.2746E+03 3.2711E+02 03 -5.0041E+02 7.8366E+02 6.6680E+01 -1.1757E+03 04 -1.0177E+03 4.2466E+02 -4.6917E+02 -1.2950E+03 05 -1.1343E+03 -4.7624E+02 4.9245E+01 9.7716E+01 06 -5.6654E+02 4.0833E+02 1.3252E+02 4.4503E+01 07 -3.4401E+02 1.0206E+03 7.1097E+01 -2.1746E+02 08 -8.4253E+02 1.6081E+02 -1.4959E+01 3.0968E+01 09 -1.9826E+02 2.8505E+02 -2.9795E+02 -2.7093E+00 10 7.5541E+01 3.8127E+01 1.1118E+02 2.1098E+02 11 3.3342E+02 6.5372E+01 3.4118E+02 1.5208E+02 12 -1.1098E+02 6.4860E+02 -6.3827E+01 -3.2338E+01 13 8.5334E+01 -3.5136E+02 1.8015E+00 -9.7847E+01 14 -4.5957E+01 -1.2517E+02 -8.1240E+01 -4.9648E+01 15 6.4300E+00 7.0910E+01 -4.0345E+01 4.1100E+01 16 1.2412E+01 5.4555E+01 -8.4526E+00 2.0114E+01 17 7.9754E+01 -5.0747E+01 -3.2762E+01 7.7057E+01 18 7.1976E+01 7.5060E+01 1.9400E+02 5.0078E+01 19 2.7979E+01 -7.7458E+00 6.2426E+01 3.7373E+01 20 4.0448E+01 -7.1364E+00 -1.6168E+01 -7.5206E+00 Edg.Bending @31%R, Flat.Bending @31%R, in-lb in-lb MEAN 1.3329E+04 -2.3327E+03 1.5498E+04 1/2PP 4.9602E+03 COSINE SINE Nth COSINE SINE -5.0097E+03 1.1354E+04 01 -1.2254E+02 -3.0989E+02 1.5366E+03 -3.9924E+02 02 -7.5122E+02 6.2968E+02 03 -1.0931E+03 1.5187E+03 -1.0720E+03 -9.2292E+02 -6.0780E+02 -2.4121E+03 04 -1.2992E+03 4.9352E+02 -1.0173E+03 -4.3252E+00 05 -1.0330E+03 -4.5803E+02 -2.6272E+02 3.6263E+02 06 -4.1413E+02 4.3380E+02 07 1.0887E+01 4.3031E+02 1.4043E+02 1.5242E+02 7.0891E+01 -8.7027E+01 08 -4.2301E+00 1.6422E+02 -3.5927E+02 -7.2176E+01 09 1.7538E+02 2.5040E+02 1.2374E+02 3.4202E+02 10 6.4265E+01 1.1947E+02 6.6803E+02 2.9300E+02 11 1.3596E+02 -1.3328E+02 7.4500E+01 -5.0428E+01 12 3.6005E+02 -2.0441E+02 4.8588E+01 -1.6962E+02 13 3.2479E+01 1.6232E+02 -8.4463E+01 -5.7461E+01 14 -1.6114E+02 -1.4262E+01 2.4287E+01 8.9922E+01 15 -7.5367E+01 -8.6711E+01 16 4.3221E+01 -6.7825E+01 1.8761E+02 8.2175E+01 17 -3.5899E+02 2.0185E+02 1.1365E+02 -1.0244E+02 18 -2.2307E+02 -2.4131E+02 -6.7931E+01 -5.4916E+01 1.3901E+01 -2.6835E+01 19 -1.7660E+01 -9.1119E+01 -3.2918E+01 -1.7466E+01 20 5.4356E+01 -9.6609E-02 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 5.0679E+03 -1.1616E+03 1/2PP 4.3754E+03 1.1939E+04 Nth COSINE SINE COSINE SINE 01 1.7504E+02 -1.9916E+03 -3.1047E+03 6.9794E+03 02 -1.7517E+03 6.3269E+02 1.2869E+03 -8.6910E+02 03 -I.0020E+03 1.3811E+03 -2.6019E+03 -1.6196E+02 04 -4.4120E+02 1.5972E+02 -2.7551E+02 -2.3282E+03 05 -9.9011E+01 1.1620E+01 -1.9869E+03 -7.7438E+01 06 1.2569E+02 -1.2157E+02 -5.5591E+02 5.5804E+02 07 3.2536E+02 -5.8685E+02 1.9684E+02 7.9346E+02 08 6.0512E+02 -7.7788E+01 1.7392E+02 -2.5304E+02 09 1.4319E+02 -2.9424E+02 1.8787E+02 -1.1191E+02 10 2.1097E+01 -1.2778E+02 -3.5608E+01 -2.3055E+01 11 -2.3139E+02 -1.5930E+00 1.0463E+02 9.6920E+01 12 -1.1032E+02 -3.2210E+02 1.7634E+02 6.9031E+01 13 -5.2697E+01 8.6795E+01 8.3505E+01 3.7235E+01 14 1.1289E+02 3.8534E+01 9.6368E+01 1.4942E+01 15 4.1124E+01 2.7429E+01 9.5248E+01 2.4883E+01 16 -2.9316E+01 2.6947E+01 2.1230E+02 1.6630E+01 17 2.4769E+02 -1.3060E+02 3.1178E+02 -2.4167E+02 18 1.5578E+02 1.5855E+02 -4.3517E+02 -1.1638E+02 19 2.3977E+01 5.4165E+01 -1.2079E+02 -6.5398E+01 20 -1.6704E+01 -4.2600E+00 -1.3296E+01 9.0835E+00 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -5.0258E+02 1.2111E+04 1/2PP 4.7093E+03 8.1620E+03 Nth COSINE SINE COSINE SINE 01 2.9810E+02 -1.9443E+03 -1.4000E+03 2.1871E+03 02 -3.0171E+03 5.9241E+02 2.2187E+03 -1.1722E+03 03 -4.2155E+02 9.0056E+02 -3.0107E+03 2.0599E+02 04 5.4080E+02 -1.8648E+02 3.5989E+01 -1.6220E+03 05 5.2365E+02 2.4378E+02 -1.8117E+03 -3.7466E+01 06 2.2177E+02 -1.2423E+02 -3.8393E+02 2.8182E+02 07 -1.0980E+01 -2.6925E+02 -4.8521E+01 9.6315E+02 08 -3.4006E+01 -7.6203E+01 -7.9908E+01 -2.2431E+02 09 -1.9782E+02 1.1082E+01 4.6793E+02 6.4071E+01 10 -4.8230E+01 1.2398E+01 -6.4441E+01 -3.5004E+02 11 8.6036E+01 9.0266E+01 -4.0293E+02 -2.3801E+02 12 -2.0344E+02 4.9475E+02 9.9364E+01 1.5359E+02 13 6.3621E+01 -1.9537E+02 1.3969E+01 2.9726E+00 14 -5.8760E+01 -3.0006E+01 1.0334E+01 -6.0880E+01 15 -1.4412E+01 1.5975E+01 -2.5004E+01 3.3345E+01 16 2.5979E+01 1.4087E+01 -1.5522E+02 -2.4177E+01 17 -1.3043E+02 3.7838E+01 -1.3628E+02 9.4201E+01 18 -8.1384E+01 -1.0408E+02 1.3460E+02 5.8915E+01 19 -1.2098E+01 -4.6862E+01 7.2286E+01 5.5918E+01 20 5.9834E+00 1.6452E+01 6.5297E+01 -3.7638E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb -4.7188E+03 MEAN -4.9536E+03 4.1004E+03 1/2PP 4.3279E+03 Nth COSINE SINE COSINE SINE 01 -1.2058E+02 -5.7742E+02 -5.6416E+02 9.7366E+02 02 -3.2240E+03 5.5762E+02 3.3554E+02 -4.9920E+02 -1.5619E+03 -2.1411E+01 03 -5.1965E+02 2.1492E+02 04 1.1452E+03 -3.5346E+02 2.9941E+02 -6.7202E+02 -5.2913E+02 -7.7985E+01 05 6.2977E+02 1.6062E+02 -2.6666E+02 2.8689E+01 06 -7.1427E+01 -7.1557E+01 -1.9178E+02 6.8675E+02 07 -3.2645E+02 5.5369E+02 -2.1767E+02 -2.6417E+01 08 -4.2039E+02 1.1115E+02 09 5.3935E+01 1.4175E+02 3.8443E+02 2.7980E+02 6.5198E+01 -2.4968E+02 10 3.4055E+01 4.0885E+01 -3.2325E+02 -3.7653E+02 11 3.4289E+01 -4.3447E+01 12 1.8109E+02 -2.9833E+02 -6.6655E+01 -6.4254E+01 13 -1.7363E+01 1.2181E+02 -1.3644E+02 4.7189E+01 14 2.4869E+01 -1.3717E+01 -6.1495E+01 4.0211E+01 15 2.9864E+00 -1.0818E+01 -5.5573E+01 -9.8577E+00 16 -1.3999E+01 1.0724E+00 -2.5234E+02 -5.9673E+01 17 4.6542E+01 -1.8125E+01 -3.0559E+02 2.5496E+02 18 4.3087E+01 3.7034E+01 4.7980E+02 1.3231E+02 19 2.3997E+01 2.7623E+01 1.4116E+02 1.1414E+02 20 6.8056E+00 -7.0372E+00 1.5251E+01 -1.2265E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib MEAN -2.0577E+03 2.5176E+02 I/2PP 2.6311E+03 2.7061E+02 Nth COSINE SINE COSINE SINE 01 -2.0081E+01 -4.7321E+01 3.5161E+00 1.4867E+01 02 -2.9810E+01 3.1994E+01 -5.8894E+00 9.2378E+00 03 -1.8240E+00 4.9850E+01 4.3070E+00 -1.4157E+00 04 -5.9432E+02 1.9127E+03 3.5225E+01 -1.9572E+02 05 2.8360E+01 -1.2855E+01 -3.5614E+00 -4.0243E+00 06 -2.0604E+01 2.9139E+01 -3.1446E+00 -1.2488E+01 07 6.9384E+01 9.9807E+00 -1.0207E+01 -2.2988E+00 08 2.3104E+02 -3.8258E+02 8.9538E-02 1.1777E+01 09 2.2355E+01 1.9183E+01 -1.2012E+00 -5.4253E+00 10 -6.5594E+01 -1.2106E+00 9.9349E+00 2.9583E+00 11 -5.3298E+00 -3.0966E+01 -1.8618E+00 2.5794E+00 4.3762E+01 3.3597E+01 12 -4.8131E+02 -5.1445E+02 1.6370E+00 5.3686E+00 13 2.5369E+01 -1.0540E+01 -7.3431E-01 1.0667E+00 14 -9.1861E+00 -7.0841E+00 -1.0063E+00 -2.4186E+00 15 4.2712E+00 1.0179E+01 16 2.4703E+01 2.2763E+01 -2.8482E+01 7.8495E+00 -8.9342E-01 -1.0182E+00 17 1.0955E+01 -4.7624E+00 18 -9.8123E+00 1.6466E+00 -4.3137E-01 9.6097E-02 19 1.4075E+01 -2.8724E+00 -2.0477E+00 1.6163E+00 1.2372E+01 -3.2805E+00 20 2.8703E+01 -6.4756E+01 Lateral Cyclic Load, Spider Ar_ Load, ib ib -2.7307E+02 -1.2184E+02 2.8572E+02 6.0515E+02 Nth COSINE SINE COSINE SINE 01 -9.5654E+00 3.1274E+00 1.8023E+02 2.4638E+02 02 1.4748E+01 -I.0738E+01 1.0361E+02 5.5084E+01 03 -2.7899E+00 -7.9949E+00 -5.8495E+01 9.6828E+01 04 3.8349E+01 -1.6502E+02 -3.8036E+01 1.4319E+02 05 -3.6598E+00 1.1104E+01 6.4378E+01 6.7510E+01 06 1.4890E+01 5.3998E+00 7.1323E+01 -4.3690E+01 07 -2.4248E+00 -5.6735E+00 -4.1422E+00 -3.1774E+01 08 -1.5910E+01 4.5254E+01 2.3674E+00 -1.8248E+01 09 2.0946E+00 7.9564E-01 -1.4878E+01 -2.6854E+01 10 4.6144E+00 -3.3621E+00 -6.2334E+01 -9.3186E+00 11 5.4222E+00 2.0913E+00 -5.1669E+01 1.7994E-01 12 7.7425E+01 7.1301E+01 -8.9757E+00 2.8488E+00 13 -1.0004E+01 3.5525E+00 -1.2682E+01 2.4455E+01 14 2.3682E+00 1.6497E+00 4.7809E+01 3.7888E+01 15 6.3363E-01 1.1257E+00 1.8803E+00 -4.6537E+00 16 -6.2212E+00 2.4903E+00 -1.1630E+01 -2.3220E+00 17 -1.4174E+00 -3.7564E+00 -2.5500E+00 4.0580E+00 18 -1.2471E-02 1.0860E+00 -1.0112E+01 -9.3294E+00 19 -9.3237E-01 -8.6891E-01 -4.8263E+00 2.0561E+00 20 -2.0163E+01 1.1176E+01 -5.4664E+00 2.0679E+00 Blade Feathering Lag Damper Load, Ib Angle, deg MEAN 1.7284E+01 5.1833E+02 I/2PP 6.4323E+00 1.4667E+03 Nth COSINE SINE COSINE SINE 01 1.5004E+00 -5.8111E+00 7.1843E+02 1.3441E+03 02 9.6222E-01 6.2852E-01 2.1055E+02 -1.7582E+02 03 2.3626E-01 -4.4082E-02 1.7559E+02 3.6920E+01 04 -1.4961E-01 4.8207E-01 -1.6310E+01 -I.1682E+02 05 3.5391E-01 1.4264E-01 4.4635E+01 -6.8612E+01 06 1.6557E-01 -1.6976E-01 -5.1601E+00 -5.2648E+01 07 -5.0891E-02 -1.8884E-01 -3.3990E+01 -4.2446E+01 08 1.7754E-02 -5.3570E-02 7.7718E-01 1.4860E+01 09 -2.1802E-03 -9.2103E-02 -2.9206E+01 2.7664E+01 10 -8.4307E-02 -6.1045E-02 -6.4336E+00 -7.4797E+00 11 -2.2285E-01 -4.9066E-02 2.6292E+01 2.4251E-02 12 -9.3370E-02 -4.0671E-02 1.2957E+00 4.2800E+01 13 -8.6050E-02 4.6291E-02 -5.7995E+00 -1.3693E+01 14 5.1736E-02 5.6109E-02 -1.5878E+01 -2.9093E+00 15 1.9225E-02 -1.7014E-02 2.7510E+00 4.6902E+00 16 -1.5274E-02 -2.3066E-03 -2.3833E+01 2.1669E+01 17 2.6035E-02 3.3723E-03 2.1042E+00 -1.2034E+00 18 1.9997E-03 -5.8004E-03 3.4159E+01 -1.2975E+00 19 -1.5886E-02 -3.2999E-03 1.7852E+01 5.2205E+00 20 7.3551E-03 1.2871E-02 1.3280E+01 2.0995E+00 MR Shaft Torque, in-lb MEAN 2.2286E+05 I/2PP 1.8482E+04 Nth COSINE SINE 01 3.5296E+01 -7.2056E+02 02 8.4422E+03 5.8219E+03 03 -1.8799E+01 6.5495E+02 04 7.6591E+03 8.9008E+03 05 -2.5191E+02 -6.2511E+01 06 -2.1178E+02 1.8450E+03 07 2.6381E+02 2.3045E+02 08 9.9310E+02 -6.1906E+02 09 -8.9591E+01 -2.1834E+02 10 -4.9964E+01 9.2108E+02 11 -4.8867E+01 -2.5601E+01 12 6.1411E+01 -7.4708E+02 13 -3.1346E+01 -1.3005E+01 14 -2.5847E+02 5.8288E+02 15 4.2054E+01 -4.6264E+01 16 2.0631E+02 -2.3357E+02 17 -4.3112E+01 -1.9168E+01 18 -4.122iE+02 4.9713E+02 19 3.2969E+01 -3.9300E+01 20 1.1321E+01 2.6316E+01 Flight 503, Condition H Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 3.1953E+04 8.3836E+03 3.9011E+04 1/2PP 2.5484E+04 Nth COSINE SINE COSINE SINE 2.9342E+04 01 -6.0027E+03 1.7719E+03 -1.6805E+04 02 -9.3628E+03 -4.0890E+03 3.3132E+03 1.3948E+03 03 5.6918E+03 -6.3820E+03 4.9632E+03 -1.1933E+03 4.6211E+02 04 3.8119E+03 -8.9716E+02 3.8647E+02 05 7.1630E+02 2.2441E+03 1.6235E+03 7.4229E+02 06 6.9616E+02 2.5034E+02 1.2303E+03 -2.7045E+02 07 1.0704E+03 4.1024E+02 -2.0360E+02 -6.0030E+02 08 8.0266E+02 4.3449E+02 -1.9807E+02 -1.3243E+02 09 5.2230E+02 4.7682E+01 -1.5505E+02 1.6013E+02 -4.9393E+02 10 2.4222E+01 5.7743E+02 1.1271E+03 -1.0536E+03 11 -1.5037E+02 -1.8845E+01 -6.5994E+00 3.4567E+02 12 1.0749E+03 -8.2143E+02 -3.4935E+02 -3.0928E+02 -3.5583E+01 13 -6.7594E+01 1.8850E+02 1.6267E+01 3.3198E+02 14 7.8619E+01 -2.6165E+02 2.2991E+01 15 5.7657E+01 -1.4288E+02 1.8655E+02 4.4778E+01 -5.4956E+01 16 1.2646E+02 -5.3048E+01 1.4461E+02 -9.6840E+01 17 2.2136E+01 -1.4126E+02 1.8016E+02 -5.5089E+02 18 1.8889E+02 -2.1992E+02 2.0496E+02 -1.1582E+02 19 1.6704E+02 -6.3336E+01 20 5.7104E+01 8.7894E+01 -1.3476E+02 5.8844E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 2.1074E+04 7.9669E+03 I/2PP 5.5218E+03 2.0092E+04 Nth COSINE SINE COSINE SINE 01 -1.7420E+03 2.1703E+01 -1.3008E+04 1.4222E+04 02 -2.1708E+03 2.1718E+02 1.1229E+03 1.1666E+03 03 7.7731E+02 -8.4537E+02 1.3709E+03 -1.3163E+03 04 2.7402E+01 -2.0933E+02 7.7698E+01 -2.7273E+02 05 -1.6967E+02 -6.5027E+02 4.0878E+02 3.5294E+02 06 -4.3043E+02 -8.2239E+01 3.1902E+02 1.5282E+02 07 -6.8409E+02 -2.3675E+02 6.6074E+01 -I.0913E+02 08 -5.2354E+02 -4.4419E+02 -1.8917E+02 -I.0474E+02 09 -3.3231E+02 -3.8007E+02 -5.9389E+01 -3.4148E+01 10 -2.5812E+00 -1.4780E+02 1.9942E+02 -7.0841E+01 11 -5.3768E+01 1.5229E+02 -4.2241E+01 -1.7019E+02 12 -7.3768E+02 3.9231E+02 -2.5493E+02 6.5898E+01 13 1.2334E+02 -1.9121E+02 -2.5238E+01 -5.5753E+01 14 5.1462E+01 8.5408E+01 4.2233E+01 2.9693E+01 15 -8.5528E+01 9.7015E+01 6.8907E+01 -1.5181E+01 16 -1.5345E+02 9.2323E+01 4.6746E+01 -5.6520E+01 -4.8767E+00 8.4689E+00 17 -5.5618E+00 1.4835E+02 18 -1.9649E+02 2.9547E+02 -4.6158E+01 1.4602E+01 19 -1.7072E+02 1.0724E+02 -3.7033E+01 -2.6981E+01 20 -6.7452E+01 3.4616E+00 -5.6597E+01 -5.2206E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.9682E+04 3.7899E+03 1/2PP 6.7364E+03 1.5759E+04 Nth COSINE SINE COSINE SINE 01 -2.0363E+03 1.0250E+03 -8.0225E+03 1.1627E+04 02 -9.7373E+02 4.9014E+02 1.3278E+03 3.8826E+02 03 -5.7884E+02 5.5513E+02 3.2170E+02 -1.0402E+03 04 -I.0900E+03 -1.8545E+02 -3.4038E+01 -1.3364E+03 05 -4.2278E+02 -1.4722E+03 1.5544E+01 2.1852E+02 06 -8.0495E+02 -7.9060E+01 9.2242E+01 1.6284E+02 07 -9.0125E+02 -2.8658E+02 3.1880E+02 1.1884E+02 08 -6.0428E+02 -3.7206E+02 1.6394E+01 -6.3732E+01 09 -4.1294E+02 -2.1388E+02 4.9612E+01 -1.8716E+01 10 -4.8060E+01 -4.5945E+01 -3.5094E+02 1.4391E+02 11 1.0502E+02 3.0346E+02 7.1743E+01 3.8023E+02 12 -5.9381E+02 6.1750E+02 1.0443E+01 -1.1674E+02 13 1.6513E+02 -1.2020E+02 6.2765E+01 -1.6880E+01 14 1.0982E+02 -7.1205E+01 -1.5290E+01 -1.1309E+02 15 -4.6682E+01 5.4544E+01 -3.4772E+01 -1.1338E+01 16 -9.6337E+01 7.1933E+01 -2.4756E+01 -2.2335E+01 17 -4.5627E+01 1.1560E+01 -2.2677E+01 4.3821E+01 18 -4.4018E+01 7.0567E+01 -1.6101E+01 2.2204E+02 19 -3.1820E+00 5.2634E+01 -7.3010E+01 7.5177E+01 20 -2.3220E+01 5.8142E+01 4.7283E+01 -3.0249E+01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb -1.5229E+03 1.3375E+04 4.8678E+03 1.5929E+04 COSINE SINE Nth COSINE SINE 01 -4.3190E+02 -1.8116E+02 -5.4208E+03 1.1835E+04 02 -8.4241E+02 5.5212E+02 1.5680E+03 -3.6988E+02 03 -1.3602E+03 1.1066E+03 -8.4679E+02 -1.0163E+03 04 -1.4104E+03 -2.4448E+02 6.0779E+01 -2.5087E+03 05 -4.4860E+02 -1.4199E+03 -7.1001E+02 -3.8445E+02 06 -6.3301E+02 6.4178E+01 -4.2447E+02 1.1218E+02 07 -3.9566E+02 7.8652E+00 1.0860E+02 3.0134E+02 08 -8.9733E+01 1.5049E+02 1.6381E+02 -8.2482E+01 1.2681E+02 -4.0745E+01 09 -1.3993E+01 2.5304E+02 10 -5.0405E+01 1.9747E+02 -6.0894E+02 2.1487E+02 11 1.4009E+02 1.1896E+02 1.1844E+02 7.0008E+02 12 4.3973E+02 4.1372E+01 2.4449E+02 -1.3589E+02 13 -1.1101E+01 1.2567E+02 1.0443E+02 5.3578E+01 14 -1.9202E+01 -1.1494E+02 -3.5796E+01 -9.2526E+01 -1.6133E+02 1.0074E+02 15 3.8370E+01 -9.1161E+01 16 1.1042E+02 -6.1254E+01 -1.3543E+02 1.1884E+02 17 2.3229E+01 -1.3766E+02 1.2526E+01 4.6732E+01 18 1.6207E+02 -2.4748E+02 -1.8355E+01 -1.0887E+02 4.2010E+01 3.9278E+01 19 1.3164E+02 -1.0439E+02 20 6.3913E+01 -1.1073E+01 4.6969E+01 -1.7688E+01 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb 5.0840E+03 -6.4597E+02 MEAN I/2PP 4.7266E+03 1.1202E+04 Nth COSINE SINE COSINE SINE -3.3171E+03 7.2988E+03 01 3.7419E+02 -1.9501E+03 1.3928E+03 -8.9007E+02 02 -1.9118E+03 4.8653E+02 -2.4948E+03 -5.9464E+02 03 -1.3501E+03 1.0947E+03 04 -4.9739E+02 -8.1352E+01 3.7617E+02 -2.3314E+03 -1.4175E+03 -9.6474E+02 05 -1.5118E+02 -2.2389E+00 -7.0692E+02 -3.0050E-01 06 1.3467E+02 3.2481E+01 07 5.7839E+02 2.6302E+02 -3.7170E+02 3.8595E+02 08 3.7420E+02 3.7358E+02 2.7491E+02 -1.0066E+01 09 2.7323E+02 9.6455E+01 1.2474E+02 -2.7329E+00 10 1.3117E+02 -1.2207E+01 8.5004E+01 -9.8278E+00 -6.9549E+00 1.5356E+02 11 -9.3261E+01 -2.3105E+02 12 1.6581E+02 -4.1040E+02 1.3937E+02 6.0800E+01 13 -5.3348E+01 -1.1275E+01 -1.2924E+01 1.5259E+02 14 -1.3211E+01 8.5073E+01 7.2098E+00 9.8005E+01 15 -2.3005E+00 3.1623E+01 -1.0176E+02 1.4206E+02 16 -4.2038E+01 3.2570E+01 -9.7335E+01 1.3216E+02 3.4880E+01 1.5799E+00 17 -2.9853E+01 1.0970E+02 18 -1.3279E+02 1.6510E+02 -1.2778E+01 -5.7319E+02 1.4996E+02 -8.2039E+01 19 -9.5001E+01 6.6982E+01 20 -3.3868E+01 1.4834E+01 -1.1930E+02 1.4557E+01 Flat.Bending @64%R, Edg.Bendlng @64%R, in-lb in-lb MEAN -5.3471E÷02 1.5229E+04 1/2PP 4.9807E+03 8.9500E+03 Nth COSINE SINE COSINE SINE 01 5.0353E+02 -1.9774E+03 -1.3688E+03 2.3613E+03 02 -3.2179E+03 3.2143E+02 2.8020E+03 -1.1611E+03 03 -7.0602E+02 7.3349E+02 -2.8793E+03 -3.7125E+02 04 5.6327E+02 1.3722E+02 4.2732E+02 -1.7019E+03 05 2.0558E+02 6.8173E+02 -1.4740E+03 -9.2824E+02 06 3.1754E+02 4.2154E+01 -6.0242E+02 -1.6417E+02 07 2.0313E+02 -7.0580E+01 -7.6607E+02 1.7437E+02 08 8.8962E+01 -1.3991E+02 -9.8178E+01 -1.1112E+02 09 -1.3005E+02 -1.8805E+02 -1.9666E+02 6.6764E+01 10 -5.9885E+01 -1.3708E+02 6.5368E+02 -1.5017E+02 11 -1.3719E+01 1.0599E+02 -6.5596E+01 -4.4719E+02 12 -4.9987E+02 3.5752E+02 -1.3447E+02 2.9857E+02 13 9.1650E+01 -6.0011E+01 -1.9746E+01 1.5090E+01 14 1.3829E+00 -3.3467E+01 1.2239E+02 -3.0097E+01 15 -4.6232E+01 2.9638E+00 8.0241E+01 -5.6428E+01 16 -1.9458E+01 1.2398E+01 5.8841E+01 -1.0832E+02 17 9.3857E+00 -4.3574E+01 -7.9594E+00 -4.4380E+01 18 9.1560E+01 -7.4391E+01 1.5387E+01 1.5556E+02 19 7.9879E+01 -2.4848E+01 -8.9713E+01 2.9831E+01 20 1.4842E+01 -1.5387E+00 -1.0904E+01 3.7218E+01 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.9583E+03 -4.8554E+03 I/2PP 4.3802E+03 4.5042E+03 Nth COSINE SINE COSINE SINE 01 -6.2458E+01 -6.1046E+02 -5.6901E+02 1.0699E+03 02 -3.4261E+03 2.0107E+02 3.9275E+02 -4.6993E+02 03 -5.5306E+02 5.0401E+01 -1.4994E+03 -3.2992E+02 04 1.1762E+03 9.4997E+01 5.0267E+02 -5.2131E+02 05 3.4450E+02 6.2265E+02 -3.5766E+02 -2.7964E+02 06 -5.9714E+01 -1.1443E+02 -2.9176E+02 -2.0070E+02 -6.2462E+02 -5.4730E+01 07 -5.3954E+02 -2.0322E+02 -2.3483E+02 -1.4408E+02 08 -3.3763E+02 -1.7552E+02 09 -4.5142E+01 5.1459E+01 -2.6865E+02 1.5612E+02 10 1.0234E+01 8.8823E+01 5.3778E+02 1.6331E+01 11 3.4935E+01 1.5645E+01 1.0092E+02 -4.1724E+02 12 2.9371E+02 -1.9266E+02 -1.0174E+02 6.3296E+01 13 -6.1165E+01 6.7272E+01 -5.3479E+01 -1.4868E+02 14 2.4913E+01 7.8991E+00 2.2280E+01 -5.8981E+01 15 4.3037E+01 -3.8722E+00 1.6819E+02 -1.2912E+02 1.6734E+02 -1.6000E+02 16 7.5726E+00 -1.3400E+01 17 -1.1581E+00 1.3470E+01 -1.5694E+01 6.6055E+00 18 -3.2946E+01 2.6630E+01 8.9912E+00 6.1311E+02 19 -3.8357E+01 2.5559E+01 -1.9829E+02 9.8670E+01 20 -1.6908E+01 1.1659E+01 1.1373E+02 -1.3370E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib -2.4070E+03 3.0666E+02 MEAN 2.9481E+03 3.0202E+02 I/2PP SINE COSINE SINE Nth COSINE -5.6434E+01 1.8791E+00 1.6771E+01 01 -3.0775E+01 3.2424E+01 -9.9276E+00 8.1054E+00 02 -1.2276E+01 7.7476E+01 4.2134E+00 -2.6074E+00 03 -1.9977E-01 1.8530E+03 1.1362E+02 -1.9756E+02 04 -1.1131E+03 -2.1279E+00 1.4994E+00 05 6.9255E+01 -6.5155E+01 1.9506E+00 -1.6694E+01 06 -3.2992E+01 5.2881E+01 5.2269E+01 -1.3917E+01 -8.1752E+00 07 8.7732E+01 -5.4272E+01 -2.7409E+01 2.5435E+00 08 5.6973E+02 09 -2.0003E+01 2.0278E+01 4.6630E+00 -4.7817E+00 10 -5.2764E+01 -2.6326E+01 6.3950E+00 5.3727E+00 11 1.3297E+01 -7.3694E+01 -5.9243E+00 3.5161E+00 12 1.1940E+02 -7.8754E+02 6.7328E+00 4.7948E+01 3.3270E+01 -5.5367E+00 3.3362E+00 13 1.3820E+01 -2.3630E+00 -1.5975E+00 -1.4747E+00 14 3.8975E+00 15 -9.2299E+00 2.8988E+00 2.4124E+00 -3.0106E-01 16 -5.3916E+01 2.9910E+01 -9.5211E+00 -1.8636E+01 5.4848E+00 1.3275E+00 1.3959E+00 17 3.8679E+00 -9.8319E+00 -2.7319E+00 -2.9691E+00 18 7.1376E+00 1.8060E+01 -2.9428E+00 -2.4086E+00 19 4.4924E+00 20 4.2333E+01 6.8572E+01 -2.0624E+00 -8.7785E+00 Lateral Spider Arm Load, Cyclic Load, lb Ib MEAN -2.7219E+02 -1.4502E+02 6.9238E+02 1/2PP 3.6213E+02 Nth COSINE SINE COSINE SINE 01 -1.0873E+01 2.5264E+00 1.5860E+02 2.9361E+02 02 1.5774E+01 -4.4010E+00 1.0340E+02 7.7554E+01 03 -4.1501E+00 -1.1294E+01 -8.8790E+01 9.0847E+01 04 8.4982E+01 -1.8374E+02 -6.9231E+01 1.4321E+02 05 -1.1177E+01 1.4978E+01 4.7545E+01 1.1169E+02 06 2.1900E+01 7.9473E+00 1.2632E+02 -2.3449E+01 07 -2.8864E+00 -8.9885E+00 3.3987E+01 -2.1733E+01 08 -6.9940E+01 1.3189E+01 1.6308E+01 -1.4774E+01 09 -1.9489E-01 2.9948E+00 1.3465E+01 -3.6697E+01 10 1.0842E+01 1.5726E+00 -2.8744E+01 -7.7765E+01 11 7.2219E+00 1.2622E+01 -2.0783E+01 -4.9819E+01 12 -4.0842E+01 1.3811E+02 -1.2560E+01 -9.2566E+00 13 -5.4840E+00 -1.4534E+01 -2.3200E+01 -5.9281E+00 14 2.2049E+00 3.9957E+00 -3.2026E+01 5.6463E+01 15 -1.3221E+00 1.2211E+00 3.1091E+00 -4.5686E+00 16 -2.9425E+00 -7.3777E+00 5.7564E+00 -9.8789E+00 17 4.3479E+00 -1.1801E+00 1.5505E+00 5.6199E+00 18 -1.9695E+00 5.6807E-01 5.8386E+00 -4.3490E+00 19 1.2584E+00 -1.1652E+00 1.7863E+00 -5.8954E+00 20 -6.0245E-01 -3.3322E+00 -1.9587E+00 -1.3524E+01

Blade

Feathering Lag Damper Load, ib

Angle, deg

MEAN 1.7699E+01 5.2321E+02

1/2PP 6.3151E+00 1.4890E+03 Nth COSINE SINE COSINE SINE 01 2.0216E+00 -5.6102E+00 7.2903E+02 1.3702E+03 02 9.2531E-01 8.3870E-01 2.0388E+02 -1.8566E+02 03 2.4790E-01 1.3497E-02 1.8487E+02 3.4869E+01 04 -2.4989E-01 4.6537E-01 -1.8837E+01 -1.4241E+02 05 2.6152E-01 3.4608E-01 5.0201E+01 -3.5600E+01 06 2.8010E-01 -4.7659E-02 1.7363E+01 -5.2285E+01 07 1.2816E-01 -1.6085E-01 -4.9151E+00 -2.5617E+01 08 8.8381E-02 -4.4490E-02 -9.6558E+00 -1.7465E+01 09 3.9913E-02 -1.1871E-01 -2.8145E+01 9.2005E+00 10 4.8406E-02 -1.0242E-01 -2.1262E+01 -1.2221E+01 11 -5.9576E-02 -2.5807E-01 1.3474E+01 1.6719E+01 12 -5.1771E-02 -8.4209E-02 -2.6452E+01 4.7865E+01 13 -6.5284E-02 -8.3707E-02 -4.3697E+00 -5.8696E+00 14 -3.5457E-02 6.5757E-02 -5.6183E+00 -4.9827E+00 15 1.6088E-02 -5.0529E-03 5.2962E+00 -2.8250E+00 16 6.9054E-03 6.2620E-03 -1.4485E+01 -4.4702E+00 3.9698E-03 1.2685E+01 1.0838E+00 17 -1.5817E-02 18 1.0360E-02 1.1863E-02 2.2494E+01 3.3335E+01 19 3.5001E-03 -6.1744E-03 1.1712E+00 2.0031E+01 20 -1.1917E-02 1.6379E-02 1.7688E+00 1.0443E+01 MR Shaft Torque, in-lb MEAN 2.2929E+05 1/2PP 2.1433E+04 Nth COSINE SINE 01 5.4205E+02 -4.8153E+02 02 9.0635E+03 9.4109E+03 03 7.4412E+01 4.3547E+02 04 3.4856E+03 1.1498E+04 05 -1.8918E+02 -1.8599E+02 06 -4.8042E+02 2.5321E+03 07 -1.1605E+02 6.7339E+01 08 9.9493E+02 9.1405E+02 09 5.0183E+01 -2.4723E+02 10 5.7109E+02 1.3048E+02 11 4.9250E+01 -1.4535E+02 12 8.6773E+02 -1.2073E+03 13 -5.4266E+01 -8.0836E+01 14 4.4992E+01 2.6412E+02 15 -1.2116E+02 4.2039E+01 16 2.3397E+02 3.2549E+02 17 -1.2597E+02 -2.4102E+02 18 -2.0793E+02 -2.7263E+02 19 -3.2669E+01 -4.7192E+01 20 1.8164E+02 7.8832E+01 Flight 504, Condition A Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb -2.8827E+02 MEAN 3.0796E+04 2.9403E+04 I/2PP 1.0276E+04 COSINE SINE Nth COSINE SINE .8192E+04 1.6169E+04 01 4.3264E+03 6.1838E+02 -1 .0659E+03 1.3192E+03 02 -2.8574E+03 3.2962E+03 2 • 8086E+03 4.0905E+02 03 3.1874E+03 -2.7660E+03 2 .8251E+02 1.4775E+01 04 2.9723E+03 -8.8075E+02 1 .5071E+02 -1.0455E+03 05 -1.0615E+03 -6.1216E+02 9 .2708E+02 -3.0582E+02 06 1.3398E+02 -6.4422E+02 2 .3509E+00 -1.7555E+02 07 7.2114E+02 7.2768E+02 2 .7864E+01 3.0600E+00 08 -3.5525E+02 -1.0254E+02 -1 • 6094E+02 8.5777E+02 09 4.3158E+02 7.7788E+01 -8 • 3809E+02 -1.5155E+02 10 1.2063E+02 1.0125E+02 2 .8303E+02 7.1598E+01 11 -4.8889E+01 4.1209E+01 -1 12 1.2208E+02 -3.7308E+02 -5 .4866E+01 1.0735E+02 13 -1.8037E+01 1.1212E+02 8 .2036E+01 1.5281E+01 14 7.7607E+00 -6.8049E+01 -2 .6234E+01 -1.5890E+01 15 -4.7179E+00 3.7459E+01 -2 .4364E+01 -1.7464E+01 16 2.1873E+01 1.3823E+02 -1 .6481E+00 -1.7449E+01 17 6.7371E+01 3.6388E+01 1 • 2096E+01 -9.2857E+01 18 5.9757E+01 8.3358E+01 1 .1998E+02 -4.1416E+01 19 -1.3849E+01 1.4345E+01 5 .0613E+01 4.0214E+01 20 -1.1900E+01 -3.4210E+01 3 • 0706E+01 -1.1441E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 2.1384E+04 3.3452E+03 I/2PP 3.8812E+03 1.2846E+04 Nth COSINE SINE COSINE SINE 01 2.0158E+03 -2.2789E+00 -1.1000E+04 5.4817E+03 02 -I.0023E+03 1.6169E+03 5.3318E+02 7.7563E+02 03 8.3670E+01 -1.8429E+02 1.2921E+03 -4.4967E+02 04 6.0583E+01 -9.3224E+01 1.8542E+02 -3.1429E+02 05 2.6410E+02 1.9467E+02 2.7547E+02 -8.1727E+01 06 -8.1140E+01 2.2991E+02 4.5853E+01 3.3872E+01 -7.0678E+01 -2.3955E+01 07 -4.5502E+02 -4.8901E+02 -4.6129E+01 3.3996E+01 08 1.9024E+02 9.2420E+01 09 -1.1052E+02 6.6005E+01 -1.0272E+02 1.3574E+02 10 -8.9873E+01 -6.1961E+01 2.1644E+01 -7.6662E+01 -2.2434E+01 5.8683E+01 11 1.0075E+02 -1.1780E+01 -2.6715E+01 6.0219E+01 12 -9.3331E+01 2.9949E+02 3.4263E+01 -6.5553E+00 13 -1.4815E+01 -1.6028E+01 8.0180E+00 1.2003E+01 14 6.0477E+01 4.7026E+01 15 -1.4143E+01 -4.0926E+01 2.0139E+01 3.6740E+00 16 -5.1501E+01 -1.1849E+02 3.8576E+00 -3.0800E+00 -1.8971E+01 1.3848E+01 17 -9.8201E+01 -3.4129E+01 18 -8.3678E+01 -7.3485E+01 -1.6948E+01 -2.2186E+01 1.5970E+01 -5.1596E+00 19 9.0923E+00 -4.0341E+01 1.3914E+01 1.1381E+00 20 3.4897E+01 1.9375E+01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.9393E+04 7.2629E+02 I/2PP 2.8435E+03 1.0582E+04 Nth COSINE SINE COSINE SINE 01 7.6328E+01 3.5671E+02 -7.8598E+03 5.5016E+03 02 -6.1358E+02 7.0274E+02 8.0789E+02 3.3387E÷02 03 -7.4010E+02 4°4892E+02 4.5321E+02 -6.7014E+02 04 -7.8202E+02 3.8108E+01 3.0941E+02 -6.0892E+02 05 5.2491E+02 3.3296E+02 -1.2815E+02 -3.9631E+01 06 -1.3923E+02 4.8040E+02 -8.3254E+01 3.9710E+01 07 -5°7488E+02 -6.4779E+02 1.5267E+02 7.7588E+01 08 2.8382E+02 5.7428E+01 -4.9658E+01 9.0955E-01 09 -1.8777E+02 -4.2918E+01 3.1784E+02 -3.1499E+02 10 -8.5719E+01 -7.9160E+01 -6.7960E+01 7.3979E+01 11 7.5558E+01 -3.7134E+01 7.9326E+01 -4.5391E+01 12 -2.7759E+01 2.4831E+02 -5.5735E-01 -1.3399E+00 13 -1.8176E+01 -5.7219E+01 -4.3244E+01 -5.8095E+00 14 7.4096E+01 2.1808E+01 1.7373E+00 9.0638E+00 15 -1.1195E+00 4.8464E+00 1.6995E+00 7.5496E+00 16 -1.7676E+01 -2°6820E+01 6.3090E+00 3.3473E+00 17 -1.3641E+01 -7.5197E+00 8.6005E+00 3.7383E+01 18 -2.0174E+01 -3.8132E+00 -4.1933E+01 3.7419E+01 19 -9.3456E+00 1.3658E+01 -2.6370E+01 -1.8695E+01 20 -5.2846E+00 -8.8054E+00 -1.2012E+01 2.6458E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.3051E+04 -4.6220E+03 I/2PP 3.2429E+03 1.0825E+04 Nth COSINE SINE COSINE SINE 01 -5.9777E+02 -2.1592E+02 -6.1731E+03 6.7624E+03 02 -7.1467E+02 -1.7619E+02 1.2313E+03 2.9743E+02 03 -1.2795E+03 7.2634E+02 -3.3588E+02 -9.3954E+02 04 -I.0379E+03 5.6600E+01 5.2996E+02 -8.1727E+02 05 4.0359E+02 1.5053E+02 -5.9241E+02 1.3265E+01 06 -1.0291E+02 3.4082E+02 -2.0860E+02 1.0195E+02 07 -2.0884E+02 -1.9087E+02 1.0227E+02 2.8816E+01 08 1.1597E+02 -4.5954E+01 6.8283E+01 -2.5130E+01 09 -3.7509E+01 -9.5830E+01 4.4039E+02 -4.6072E+02 10 2.6750E+01 2.6225E+01 -1.2620E+02 1.4668E+02 11 -3.2307E+01 -6.6164E+00 1.2699E+02 -1.2303E+02 12 9.0621E+01 -1.3410E+02 2.8008E+01 -4.9199E+01 13 -4.1230E+00 4.7620E+00 -9.3315E+01 -4.2566E+00 14 -2.4771E+01 -3.6148E+01 2.2241E+01 -9.6824E+00 15 -4.7210E-01 3.1983E+01 -4.6024E+01 -1.9262E+01 16 3.6133E+01 9.2175E+01 -2.9282E+01 -3.6188E+01 17 8.2213E+01 1.6876E+01 -9.3586E+00 -5.8546E+01 18 7.2558E+01 5.6430E+01 1.9086E+01 -1.6067E+01 19 -3.6788E+00 2.7833E+01 -1.0067E+01 2.5914E+00 20 -2.1318E+01 -1.5131E+01 -4.9553E+00 7.8758E+00 Edg.Bending @48%R, Flat.Bending @48%R, in-lb in-lb -2.5560E+03 MEAN 5.1944E+03 7.4392E+03 1/2PP 3.3866E+03 COSINE SINE Nth COSINE SINE -3.4289E+03 3.8644E+03 01 -8.3907E+02 -1.2754E+03 1.1563E+03 -5.0574E+01 02 -1.1579E+03 -4.5968E+02 -1.0996E+03 -9.7816E+02 03 -1.0887E+03 8.3935E+02 5.7783E+02 -6.9085E+02 04 -4.6628E+02 1.0941E+02 -1.1049E+03 4.9532E+01 05 -5.5983E+01 -2.3655E+01 -2.1610E+02 3.5471E+01 06 8.7650E+01 -1.2666E+02 -2.2341E+02 3.0573E+01 07 3.5446E+02 3.9655E+02 1.7077E+02 6.3452E+00 08 -2.1050E+02 -8.1628E+01 -1.3901E+02 1.4104E+02 09 1.4282E+02 1.3107E+01 1.0975E+01 1.0177E+01 10 7.6106E+01 2.9587E+01 -3.5342E+01 -3.1478E+01 11 -6.0887E+01 1.5477E+01 3.6878E+01 -2.9908E+01 12 -2.1667E+01 -1.3017E+02 -2.1403E+01 3.6070E+01 13 4.7312E+01 1.0094E+01 5.1575E+01 -1.2245E+01 14 -1.1118E+01 2.1758E+01 -4.1729E+01 -3.6134E+01 15 -3.5139E+00 -3.2396E+01 -4.9354E+01 -7.0026E+01 16 -8.3211E+00 -6.3259E+01 -4.4751E+01 -1.5268E+02 17 -5.5781E+01 -8.6606E-01 1.0460E+02 -1.1931E+02 18 -6.5509E+01 -3.6861E+01 5.7121E+01 4.2042E+01 19 -6.7811E+00 -2.5480E+01 3.3587E+01 -1.9723E+00 20 1.5200E+01 1.0874E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb In-lb 3.9173E+03 MEAN 1.2755E+01 4.9402E+03 I/2PP 3.7475E+03 SINE Nth COSINE SINE COSINE 1.6735E+03 01 -8.5966E+02 -1.1462E+03 -1.6603E+03 -3.2345E+02 02 -1.6686E+03 -3.9491E+02 9.2763E+02 -6.8224E+02 03 -8.0194E+02 7.2279E+02 -1.2162E+03 -4.6356E+02 04 3.7519E+02 5.3364E+01 4.7660E+02 4.0698E+01 05 -1.9837E+02 -1.5790E+02 -1.0295E+03 -4.8670E+01 06 8.1051E+01 -1.7392E+02 -1.1547E+02 -3.8666E+01 07 1.4304E+02 1.3890E+02 -3.4960E+02 5.4661E+01 08 -5.0250E+01 2.5208E+01 1.8292E+02 5.2361E+02 09 -6.6834E+01 5.7407E+01 -5.1170E+02 -1.7380E+02 10 -7.1162E+01 -1.9113E+01 9.7235E+01 7.8136E+01 11 7.0942E+01 -1.7573E+01 -1.0766E+02 9.0582E+01 12 -6.5910E+01 2.3208E+02 1.5496E+00 -3.9781E+00 13 -3.8993E+01 1.0670E+00 6.9364E+01 -1.2643E+01 14 2.2982E+01 6.6364E+00 2.1681E+01 3.9371E+00 15 1.2219E+00 -3.6120E+00 3.1365E+01 2.4581E+01 16 -6.5709E+00 2.7162E+01 1.8024E+01 4.8190E+01 17 1.4495E+01 3.2186E+00 2.2217E+01 4.1291E+01 18 2.8670E+01 1.0543E+01 -1.6573E+01 -1.2925E+00 19 1.0188E+01 1.6659E+01 -6.7259E+00 -1.1745E+01 20 -9.8200E+00 -1.8691E+00 -8.3626E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.5687E+03 -5.4839E+03 1/2PP 3.2125E+03 2.9133E+03 Nth COSINE SINE COSINE SINE 01 -2.2232E+02 -1.9680E+02 -5.9691E+02 3.2571E+02 02 -2.0815E+03 5.0415E+01 4.5990E+02 -3.1935E+02 03 -7.5139E+02 5.2162E+02 -9.1963E+02 -3.6769E+02 04 7.4673E+02 -2.8233E+02 3.9762E+02 -1.3001E+02 05 9.3322E+01 -1.5525E+02 -4.5881E+02 -1.5959E+02 06 8.2074E+01 6.6183E+01 -1.0668E+02 1.2629E+01 07 -4.0008E+02 -3.5390E+02 -2.7731E+02 -1.0265E+02 08 1.0678E+02 5.2213E+01 1.2979E+02 1.5906E+01 09 -3.1121E+01 -3.2912E+01 -4.6943E+02 3.4632E+02 10 1.4250E+01 1.1395E+01 9.2710E+01 -1.2012E+02 11 -3.0412E+01 -2.8083E+01 -8.2877E+01 8.8268E+01 12 6.3484E+01 -1.4852E+02 2.6899E+01 1.8960E+01 13 1.1777E+01 2.5940E+01 5.1243E+01 -2.7998E+01 14 -3°1326E+01 -2.2263E+01 -3.1605E+01 3.7413E+00 15 7.3591E+00 -9.7785E+00 5.1375E+01 5.1340E+01 16 1.5174E+01 6.9847E+00 6.7210E+01 7.5601E+01 17 -1.1266E+01 9.5131E+00 4.7214E+01 1.6993E+02 18 -1.9183E+01 -1.8431E+01 -1.2786E+02 1.2077E+02 19 -1.0152E+00 -1.4977E+01 -6.0217E+01 -4.4259E+01 20 5.6807E+00 1.2773E+01 -2.8741E+01 7.6945E+00 Collective Control Longitudinal Cyclic Load, Ib Load, Ib MEAN -9.8001E+02 1.0198E+02 1/2PP 9.6441E+02 1.2272E+02 Nth COSINE SINE COSINE SINE 01 -7.1234E+00 -4.6646E+01 3.7261E+00 1.0945E+01 02 -2.2932E+01 -2.8841E+01 -3.2821E+00 1.2711E+01 03 -4.7849E+01 2.3191E+01 1.5127E+00 -6.4270E+00 04 -7.4266E+02 4.7280E+02 9.3667E+01 -2.0926E+01 05 3.3415E+01 -3.6131E+01 -2.4908E+00 5.1955E+00 06 2.1473E+00 1.5548E+01 -8.3948E-01 -6.6821E-01 07 2.2069E+01 -2.3023E+01 -2.0944E+00 4.9517E+00 08 5.0737E+00 8.1659E+01 -1.1476E+01 8.2170E+00 09 2.6700E+01 4.4178E+00 -5.8914E+00 -8.1397E-01 10 2.3254E+01 1.2233E+00 -4.4043E+00 1,2953E-01 11 3.3070E+01 -5.4491E+01 -5.3939E+00 1.1348E+01 12 -3.6665E+01 -4.5281E+00 -1.8900E+01 -5.8438E+00 13 -1.3374E+01 1.2644E+01 2.6569E+00 -4.0177E+00 14 3.6140E+00 3.5184E+00 -1.0861E+00 -2.0013E+00 15 1.1478E+00 -4.7806E+00 -5.8856E-01 -1.1660E-01 16 -5.3506E+00 2.2675E+01 6.4083E-01 -4.9196E+00 17 -9.6810E+00 2.6484E+00 1.9595E+00 6.0010E-01 18 3.5574E+00 1.2860E+00 -9.2743E-01 -8.9544E-02 19 3.8321E+00 6.4199E+00 2.8462E-01 -4.1396E-01 20 3.4211E+00 -1.4799E+01 5.5870E+00 -1.8509E+00 Spider Arm Load, Lateral Cyclic Load, ib ib -1.7063E+02 -2.5460E+01 8.2870E+01 3.1179E+02 COSINE SINE COSINE SINE Nth 6334E+00 -4.1394E+00 9.2348E+01 1.3874E+02 01 -8.

4404E+01 -1.4198E+00 5.4075E+01 -2.5890E+01 02 i.

4683E+00 -1.8882E+00 -1.9223E+01 -2.1036E+01 03 3.

7400E+01 -2.8573E+01 -4.4193E+01 4.6080E+01 04 -3.

8521E+00 4.2875E+00 2.2948E+01 4.6834E+01 05 -3.

06 -2. 9527E+00 -2.7943E+00 -1.7072E-01 -3.3930E+01 07 1. 5207E+00 -4.4169E+00 2.5965E+00 3.6998E+00 08 9. 6508E+00 -1.5883E+01 -2.9944E+00 1.0622E+01 09 2. 4235E+00 1.7998E-01 5.0660E-01 -1.2444E-01 2385E+00 -7.3824E-01 -5.3113E+00 -7.9009E-01 10 3.

0675E+00 -3.0906E+00 -2.5126E+00 7.8083E+00 11 1.

12 1. 9102E+01 -2.4297E+00 -1.2273E+01 2.0842E+00 13 4. 4602E-01 2.5479E+00 6.8244E+00 -2.5721E+00 14 2. 4534E+00 2.2390E+00 -2.2750E+01 8.8522E+00 15 2. 3733E-01 -3.6318E-01 1.4555E+00 -3.4973E+00 16 4. 6166E+00 1.0208E+00 4.0695E-01 -3.8215E+00 17 -8. 8737E-01 1.7830E-01 1.4624E+00 1.5042E+00 18 3. 6156E-01 -1.5417E-01 2.5131E+00 1.9237E-01 19 3. 7592E-01 -1.6431E-01 -1.4392E-01 4.6174E-01 20 -7. 8944E+00 4.9216E+00 -8.4704E-01 1.3859E+00 Blade Feathering Lag Damper Load, ib Angle, deg 5.1289E+02 MEAN 1.5740E+01 1.3431E+03 1/2PP 3.6798E+00 SINE Nth COSINE SINE COSINE 1.3648E+03 01 1.8364E+00 -3.0616E+00 -3.2531E+01 -3.3046E+00 02 3.5971E-01 4.7872E-01 1.7504E+02 3.7396E+01 03 1.4101E-01 -1.3267E-01 -6.4307E+01 -1.4289E+01 04 -2.0822E-01 8.5703E-02 -2.6826E+00 -8.2893E+01 05 2.0453E-01 1.9775E-02 2.0477E+01 -1.8347E+01 06 4.2937E-02 -7.6199E-02 -9.9958E+00 -2.6782E+01 07 5.0982E-02 -1.8033E-02 4.4629E+01 -9.5213E+00 08 -3.4884E-02 5.0924E-02 7.0288E+00 -2.7489E+01 09 -5.0278E-02 4.1625E-02 1.5812E+01 2.1232E+01 10 -3.2056E-03 -2.3431E-02 -5.3022E+00 -1.8924E+01 11 -2.4657E-03 1.4175E-02 9.8260E+00 2.0712E+01 12 -4.5422E-02 1.9204E-02 -4.0454E+00 -8.2487E-01 13 2.3403E-02 9.1557E-03 -6.1608E+00 -8.0479E-01 14 -3.1607E-02 3.1600E-03 -1.4579E+00 7.3255E-01 15 1.4311E-03 1.3278E-03 -3.9406E+00 16 3.3936E-03 -1.9214E-02 1.7698E+00 -2.0656E+00 17 5.8204E-03 1.4511E-03 5.8566E+00 2.9132E+00 18 2.4036E-03 -1.3989E-04 -2.1725E+00 1.2978E+01 -1.3683E+00 19 1.4557E-04 1.0589E-02 -4.3946E+00 -2.0992E+00 20 2.4658E-03 -8.1577E-03 -4.0615E-01 MR Shaft Torque, in-lb MEAN 1.8172E+05 I/2PP 7.6653E+03 Nth COSINE SINE 01 6.0398E+02 -3.0927E+02 02 3.5130E+03 3.9788E+02 03 -6.6120E+02 5.9900E+02 04 9.2002E+02 2.2029E+03 05 -2.4308E+01 -5.7288E+01 06 -1.4493E+03 9.0751E+02 07 8.3671E+01 1.2267E+02 08 1.6560E+02 -1.8462E+02 09 7.2109E+01 6.2726E+01 10 -5.2372E+02 -4.4367E+02 11 6.2840E+01 2.3278E+00 12 -6.8923E+02 -5.3583E+02 13 3.8104E+01 -2.5532E+00 14 -1.8729E+02 4.2509E+01 15 3.2395E+01 -9.9310E+01 16 -1.2655E+02 1.3898E+02 17 6.9981E+01 -4.0529E+01 18 -1.4360E+02 -2.4856E+02 19 -3.2217E+01 -3.9595E+01 20 -3.0422E+01 4.0469E+01 Flight 504, Condition B Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 3.2961E+04 3.7506E+03 I/2PP 1.2755E+04 3.2988E+04 Nth COSINE SINE COSINE SINE 01 5.1434E+03 1.1652E+03 -1.7778E+04 2.1342E+04 02 -4.4042E+03 1.3573E+03 2.4070E+03 1.1783E+03 03 3.3944E+03 -4.0058E+03 3.2663E+03 4.0587E+01 04 3.6079E+03 -1.3293E+03 2.3628E+02 -2.6614E+02 05 -1.4977E+03 -8.7831E+02 8.3257E+01 -1.9031E+03 06 -6.9275E+00 -3.0924E+02 -2.4050E+02 -1.2321E+02 07 5.4043E+02 5.3661E+02 -1.8357E+02 -1.9415E+02 08 -1.9769E+02 2.6817E+02 -9.4363E+01 -2.0470E+01 09 1.7827E+02 -8.9908E+01 1.5048E+02 4.8555E+02 10 -1.5759E+02 7.0317E+01 7.5515E+02 4.4411E+02 11 -6.2039E+01 1.7577E+02 -2.5397E+02 3.6339E+02 12 -3.2353E+02 -2.6965E+02 -1.8964E+00 1.5770E+02 13 2.0030E+02 -1.2413E+00 9.4022E+00 -3.2000E+01 14 -3.0266E+01 -3.2651E+01 4.0328E+01 3.8968E+00 15 -8.3812E+01 -3.5359E+01 -7.2099E+01 -4.1654E+01 16 8.1550E+00 -1.8896E+01 3.9707E+01 2.4484E+01 17 -7.5682E+01 2.9690E+02 6.0014E+01 -8.0187E+01 18 -5.1600E+01 -7.0600E+01 6.8919E+01 1.0913E+02 19 3.9332E+01 2.1020E+01 -7.1524E+01 9.1164E+00 20 3.3726E+01 1.8506E+01 -2.6640E+01 -1.5642E+01 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb 5.3049E+03 MEAN 2.2089E+04 1.5824E+04 I/2PP 4.1117E+03 COSINE SINE Nth COSINE SINE -1.2227E+04 8.8819E+03 01 2.5268E+03 9.5433E+01 5.7460E+02 8.6339E+02 02 -1.2112E+03 1.3620E+03 1.0983E+03 -8.5784E+02 03 2.8817E+02 -3.2705E+02 04 7.6565E+01 -2.1158E+02 4.4144E+01 -3.7685E+02 1.5506E+02 -4.3578E+02 05 2.5487E+02 1.3025E+02 -5.7340E+01 -4.1423E+01 06 -1.1504E+02 3.7180E+00 -5.7478E+01 -2.3028E+01 07 -2.9703E+02 -2.1491E+02 -2.5393E+01 -1.7086E+01 08 1.4021E+02 -2.0184E+02 3.2753E+01 3.1802E+01 09 1.1345E+01 -1.2517E+01 1.4511E+02 1.1862E+01 10 8.7293E+01 -6.5254E+01 2.0163E+01 6.2865E+01 11 1.4741E+02 -1.5638E+02 3.8790E+01 1.4479E+02 12 2.6726E+02 2.3399E+02 -1.5562E+01 -2.9945E+01 13 -1.3375E+02 -1.5242E+01 -9.1069E-01 -4.2124E-01 14 4.9071E+01 1.4663E+00 -3.2309E+01 -7.8442E+00 15 8.6112E+01 4.6626E+01 -2.5168E+01 2.5780E+01 16 7.7554E+00 3.9328E+00 1.5320E+01 -2.7292E+01 17 9.6649E+01 -2.8298E+02 1.3380E+01 2.0782E+01 18 8.8510E+01 7.2440E+01 -2.6027E+01 2.7502E+00 19 -3.4264E+01 7.9087E+00 -6.0045E+00 -7.7168E+00 20 -3.5852E+01 -4.0738E+01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb 1.8525E+03 MEAN 2.0048E+04 1.2295E+04 I/2PP 2.8762E+03 Nth COSINE SINE COSINE SINE 01 3.7512E+02 6.9810E+02 -8.4801E+03 7.9820E+03 02 -6.6226E+02 7.3523E+02 8.6137E+02 3.6051E+02 03 -5.8765E+02 5.6309E+02 3.4460E+02 -7.5762E+02 04 -9.3479E+02 3.4351E+01 2.7000E+02 -5.7556E+02 05 6.8749E+02 3.6021E+02 -9.3304E+01 5.3397E+01 06 -1.2900E+02 1.0952E+02 -2.0293E-01 8.3809E+01 07 -4.2364E+02 -4.3171E+02 6.0975E+01 7.9945E+01 08 1.4523E+02 -2.6586E+02 -8.1843E+01 7.2607E+01 09 -7.2452E+01 -2.8037E+01 -5.3923E+01 -1.6072E+02 10 1.8936E+01 -1.0523E+02 -3.0247E+02 -1.1643E+02 11 5.2101E+01 -1.4996E+02 5.9578E+01 -1.3623E+02 12 2.3624E+02 1.8457E+02 2.0006E+01 -3.1328E+01 13 -1.2604E+02 1.2814E+01 -1.3977E+01 1.6555E+01 14 4.4323E+01 -1.0636E+01 -4.0060E+00 -7.7130E+00 15 3.7135E+01 2.5994E+01 1.1754E+01 7.5611E+00 16 9.1692E+00 -6.3917E+00 -7.2012E+00 9.6579E+00 17 -9.0507E+00 -7.9221E+01 -1.4953E+01 4.6609E+01 18 2.1704E+01 1.2096E+01 -3.1545E+01 -4.3329E+01 19 -7.6178E+00 -7.8119E+00 4.3075E+01 -1.5998E-01 20 5.1550E+00 1.0947E-01 3.2774E+00 -2.3403E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.3493E+04 -3.4097E+03 1.1894E+04 I/2PP 3.2813E+03 Nth COSINE SINE COSINE SINE 01 -2.4888E+02 -1.5002E+02 -6.1622E+03 8.9300E+03 02 -6.6610E+02 4.2479E+01 1.2313E+03 1.8932E+02 03 -1.1736E+03 9.1470E+02 -3.4621E+02 -7.2961E+02 04 -1.2119E+03 1.0422E+02 6.4534E+02 -7.7482E+02 05 6.0649E+02 2.5791E+02 -3.3662E+02 5.7018E+02 06 -5.7247E+01 1.1545E+02 4.0079E+00 1.9587E+02 07 -2.4027E+02 -2.3763E+02 7.2197E+01 9.0322E+01 08 -2.5610E+01 -1.1695E+02 5.5684E+00 5.0995E+01 09 -3.9114E+01 6.3277E+00 -7.0427E+01 -2.0681E+02 10 -I.0430E+02 1.0241E+01 -4.5850E+02 -1.7433E+02 11 -1.3046E+02 4.0028E+01 7.8257E+01 -2.4745E+02 12 -9.7940E+01 -1.3528E+02 1.6538E+01 -2.0525E+02 13 7.2086E+01 5.4530E+01 -2.2832E+01 7.2924E+01 14 -3.6034E+01 -1.7655E+00 7.8522E+00 -2.2093E+01 15 -6.0977E+01 -3.8708E+01 9.1083E+01 5.2431E+01 16 7.8569E+00 -8.3690E+00 4.4579E+01 -6.3022E+01 17 -8.3268E+01 2.3984E+02 3.9534E+00 -6.5068E+01 18 -7.2973E+01 -5.8728E+01 3.7699E+01 9.5400E+00 19 3.1778E+01 -6.2970E+00 8.4644E+00 -1.7281E+00 20 3.0185E+01 3.5482E+01 -2.9900E+00 -4.6476E+00 Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb MEAN 5.2550E+03 -1.6355E+03 1/2PP 3.6039E+03 8.1227E+03 Nth COSINE SINE COSINE SINE 01 -5.2773E+02 -1.3736E+03 -3.5995E+03 5.0619E+03 02 -1.2838E+03 -2.8704E+02 1.1202E+03 -8.3061E+01 03 -1.0134E+03 9.8702E+02 -1.1812E+03 -6.9836E+02 04 -4.2656E+02 1.1334E+02 7.6449E+02 -6.7692E+02 05 3.9279E+01 -6.8629E+00 -6.0292E+02 8.0885E+02 06 6.6288E+01 3.6114E-01 -2.9785E+01 9.0327E+01 07 3.6394E+02 1.9033E+02 7.4517E+00 1.1916E+02 08 -6.3769E+01 1.9751E+02 2.3332E+02 -7.6057E+01 09 3.4887E+01 1.4387E+01 4.9885E+01 1.2935E+02 10 3.7242E+01 -2.1376E+00 1.1471E+02 7.4110E+01 11 4.0139E+01 6.9581E+01 -5.2225E+01 -5.1403E+00 12 -1.2626E+02 -4.2444E+01 -3.6990E+01 -1.1338E+02 13 1.5942E+01 -7.6351E+01 -7.1436E+00 5.7696E+01 14 1.4444E+01 -2.6441E+01 1.7029E+01 -2.3233E+00 15 3.2506E+01 2.5139E+01 5.9742E+01 7.7634E+01 16 -2.1276E+01 1.1470E+01 4.4388E+01 -6.7901E+01 17 5.6190E+01 -1.6933E+02 7.7872E+01 -1.9491E+02 18 4.9297E+01 3.3981E+01 1.0342E+02 1.4736E+02 19 -1.9501E+01 5.9073E+00 -1.0942E+02 -1.0419E+01 20 -2.6597E+01 -2.5800E+01 -1.7235E+00 1.1299E+00 Edg.Bending @64%R, Flat.Bending @64%R, in-lb in-lb 7.9684E+02 MEAN -1.2228E+02 4.9280E+03 1/2PP 3.8068E+03 COSINE SINE Nth COSINE SINE -1.6515E+03 2.4144E+03 01 -6.6782E+02 -1.2221E+03 8.3122E+02 -3.8268E+02 02 -1.8232E+03 -2.6781E+02 -1.3179E+03 -2.7424E+02 03 -5.9041E+02 5.8056E+02 8.0869E+02 -4.8968E+02 04 4.9543E+02 -4.0873E+01 -6.0789E+02 5.5468E+02 05 -2.4218E+02 -2.1844E+02 -1.2734E+02 8.8778E+01 06 4.5765E+01 -1.1494E+02 -2.2118E+01 4.7906E+01 07 7.5466E+01 1.6214E+02 2.5604E+02 -1.7231E+02 08 1.8189E+01 6.1231E+01 9.1039E+01 2.9486E+02 09 2.3505E+01 -1.5632E+01 4.7297E+02 1.8241E+02 10 2.8505E+01 -1.6335E+01 -1.0712E+02 1.8426E+02 11 6.9561E+01 -7.6720E+01 3.8005E+01 1.4820E+02 12 2.0099E+02 1.7899E+02 -2.7262E+01 -3.6383E+01 13 -7.4995E+01 3.4068E+01 14 1.8833E+01 4.8246E+01 4.7319E+00 -2.2118E+01 -4.8107E+01 -4.9281E+01 15 -9.6254E-01 1.0950E+01 -1.7404E+01 1.6292E+01 16 1.7481E+01 -1.5579E+01 -1.4549E+01 4.7777E+01 17 -3.6116E+01 6.8891E+01 -2.4105E+01 -3.5734E+01 18 -2.4694E+01 -8.6132E+00 3.1464E+01 -2.3903E+00 19 2.0645E+00 -9.7600E-01 20 1.5942E+01 1.3956E+01 1.5806E+01 -2.1609E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb -4.9047E+03 MEAN -4.7222E+03 3.0507E+03 I/2PP 3.5601E+03 Nth COSINE SINE COSINE SINE 01 -1.5874E+02 -3.1501E+02 -5.8935E+02 6.1560E+02 02 -2.2417E+03 1.4905E+01 3.3805E+02 -3.9519E+02 03 -3.5344E+02 1.7049E+02 -I.0003E+03 -1.0650E+02 04 9.1368E+02 -5.2853E+02 7.2949E+02 -1.0221E+02 05 -2.5198E+02 -3.2061E+02 -2.0003E+02 1.6933E+01 06 -7.5784E+01 -I.0387E+01 -1.3088E+02 -2.7310E+01 07 -3.5116E+02 -1.4794E+02 -9.2214E+01 -9.4865E+01 08 -3.1208E+01 -1.7097E+02 1.6480E+02 -1.7950E+02 09 -8.7039E+01 -4.8612E+00 5.6258E+01 1.7034E+02 10 -2.8327E+01 4.0945E+01 3.5239E+02 1.4850E+02 11 -8.1329E+01 2.7194E+01 -1.2926E+02 2.1800E+02 12 -1.3319E+02 -1.4225E+02 3.8083E+01 1.5198E+02 13 6.8786E+01 1.3013E+01 4.4643E+01 -7.0086E+01 14 -3.1141E+01 -4.1311E+00 -5.2288E+00 -2.5850E+01 15 -2.6665E+01 -2.7048E+01 -1.1284E+02 -9.0841E+01 16 4.8597E+00 -1.3219E+01 -4.7716E+01 8.0421E+01 17 3.0851E+01 -1.5014E+01 -6.6175E+01 2.0613E+02 18 5.3944E+00 2.0011E+01 -I.0611E+02 -1.3862E+02 19 -1.5566E+01 -4.5864E+00 1.1046E+02 1.3521E+01 20 -3.0633E+00 -2.2623E+01 -7.3192E+00 -5.4764E+00 Collective Control Longitudinal Cyclic Load, ib Load, ib -1.3296E+03 1.4449E+02 2.2725E+03 1.9813E+02 Nth COSINE SINE COSINE SINE 01 -1.0000E+01 -6.1162E+01 3.5571E+00 1.6634E+01 02 -5.0537E+01 -6.2992E+00 7.1691E+00 8.9123E+00 03 -3.5091E+01 -2.1335E+01 -2.0967E+00 -3.6237E+00 04 -1.4587E+03 1.4485E+03 1.2298E+02 -9.3623E+01 05 -3.4618E+01 -1.0973E+02 5.7201E+00 1.4629E+01 06 -1.7800E+01 3.8678E+01 1.0931E+00 -3.2768E+00 07 2.8335E+01 -4.9013E+01 -2.1434E+00 8.3823E+00 08 1.7966E+02 3.3297E+02 -2.1156E+01 -6.2166E+00 09 -3.0163E+01 5.2813E+00 -2.0480E+00 9.8599E-01 10 1.8763E+01 3.6865E+00 9.1165E-01 4.1436E-01 11 3.8720E+01 -5.2047E+01 -9.7526E+00 7.3903E+00 12 -4.7531E+00 -8.6185E+00 -1.0618E+01 1.1823E+01 13 -1.1239E+00 1.8002E+01 -2.5547E+00 -3.3134E+00 14 1.0296E+00 -8.9413E+00 1.0132E+00 1.6835E+00 15 -1.4386E+00 -1.2182E+01 -1.1455E+00 -1.6007E+00 16 -7.8896E+00 -1.1616E+01 1.7043E+00 9.4768E+00 17 6.4815E+00 5.8041E+00 5.6797E-02 -1.1744E+00 18 4.6099E+00 9.1897E+00 -1.0568E+00 -8.2661E-02 19 3.8433E+00 -9.4715E-01 3.4338E-01 -9.3973E-01 20 2.4603E+01 -2.0072E+01 -1.4273E+00 1.9997E+00 Lateral Cyclic Load, Spider Arm Load, ib ib MEAN -2.1726E+02 -5.9069E+01 I/2PP 1.7233E+02 3.9788E+02 Nth COSINE SINE COSINE SINE 01 -7.

7963E+00 2.0281E+00 1.2443E+02 1.7582E+02 02 I.

4645E+01 -8.6932E+00 6.4289E+01 -1.1738E+01 03 i. 8330E+00 3.1204E+00 -6.2601E+01 3.3802E+01 04 4.

8312E+01 -1.1566E+02 -9.2439E+01 1.0787E+02 05 2. 6353E+00 1.4438E+01 1.2023E+01 7.6912E+01 06 -I. 7140E+00 -1.9940E+00 3.8011E+01 3.1474E+01 07 -3.

2035E+00 -5.9998E-01 9.2856E+00 3.3731E+01 08 I. 7565E+01 -4.3444E+01 6.5049E+00 1.7445E+01 09 -i. 3874E+00 -4.1097E+00 -3.2414E-02 2.3942E+00 10 -I. 6831E+00 -2.9104E-01 1.8176E+01 8.1578E+00 11 3. 0401E+00 1.0318E-01 1.6325E+01 2.5664E+00 12 -3.

6185E+00 -8.2189E+00 -1.3818E+00 1.2706E+00 13 4. 1264E+00 -6.0858E+00 1.8115E+00 -6.3834E+00 14 -1. 8676E+00 1.0451E+01 1.5971E+00 -5.4945E+00 15 2. 3873E+00 8.5579E-01 2.4186E-01 -4.5183E+00 16 5. 9241E+00 -5.1218E+00 -4.1924E+00 3.9156E+00 17 -7. 7917E-01 1.4852E+00 -6.8712E-01 3.2728E-04 18 1.

6115E-02 -1.4979E+00 -5.4969E+00 1.5699E-01 19 2.

2762E-01 2.6883E-01 2.5984E-02 -2.3741E+00 20 -1.

4013E+00 -1.9480E+00 -7.5057E-01 2.5245E+00 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.6840E+01 4.9177E+02 1/2PP 4.7261E+00 1.3628E+03 Nth COSINE SINE COSINE SINE 01 1.9306E+00 -4.0797E+00 3.0240E+02 1.4189E+03 02 5.2315E-01 5.4971E-01 1.9495E+02 -4.0852E+01 4.4963E+01 03 2.0819E-02 -8.8750E-03 1.1059E+02 4.2005E+01 -1.4129E+01 04 -4.0364E-01 3.0986E-01 05 4.7258E-02 2.3027E-02 -2.5254E+01 -4.1977E+01 06 1.2358E-02 9.4765E-03 -8.5077E+00 1.9420E+01 07 2.0975E-02 3.0649E-02 -1.3920E+01 -2.0022E+01 -3.1567E+01 08 2.6140E-02 8.3475E-02 8.7893E+00 -1.1741E+01 09 -5.9659E-03 3.5784E-02 -4.2422E+00 10 4.5147E-02 6.2194E-02 -3.3693E+01 7.5540E+00 11 2.8462E-02 2.6766E-02 -1.6448E+01 -1.2029E+01 12 1.9556E-03 4.3383E-02 1.8581E+01 -8.8969E+00 13 2.0596E-02 -3.5107E-02 -8.4356E+00 4.0517E+00 14 -1.5101E-03 3.1339E-02 8.1143E+00 -4.6583E-01 15 -1.3612E-03 -1.2254E-02 8.4914E-01 -3.6808E+00 8.7463E+00 16 -4.9259E-03 1.1360E-02 4.2581E+00 17 1.4512E-02 -2.9004E-02 4.5966E+00 2.0654E+00 18 1.5271E-03 6.6731E-03 -4.9509E+00 -5.2512E+00 19 -1.2414E-04 -6.5981E-03 9.0549E+00 1.1314E+00 20 -9.4775E-03 6.5727E-03 -6.7684E+00 -3.0664E+00 MR Shaft Torque, in-lb MEAN 1.9753E+05 1/2PP 9.4235E+03 Nth COSINE SINE 01 -1.2369E+03 -7.5767E+02 02 4.8469E+03 2.4770E+03 03 -8.7130E+02 7.4762E+02 04 2.5439E+03 3.0380E+02 05 -2.0516E+02 -1.6506E+02 06 -1.3844E+03 1.0742E+03 07 1.40IOE+02 9.1383E+01 08 3.2532E+02 -1.7583E+02 09 3.1056E+01 5.3072E+01 10 -1.5405E+02 -4.7126E+01 11 1.3935E+01 -8.4025E+01 12 -3.6702E+02 2.7152E+02 13 4.4467E+01 -1.2732E+02 14 1.5140E+02 2.9448E+02 15 1.1589E+02 -9.8362E+01 16 1.6395E+01 3.1209E+01 17 3.7815E+00 2.6785E+01 18 6.1981E+01 1.4541E+02 19 -1.6365E+01 3.3088E+01 20 4.9647E+01 9.1942E+01 Flight 504, Condition C Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb MEAN 3.1838E+04 1.2369E+03 1/2PP 1.1983E+04 3.1435E+04 Nth COSINE SINE COSINE SINE 01 1.8494E+03 9.6446E+02 -1.7595E+04 2.0363E+04 02 -4.6444E+03 3.5601E+01 2.2700E+03 1.1387E+03 03 3.7299E+03 -3.5905E+03 3.0517E+03 4.1184E+02 04 2.9731E+03 -5.5664E+02 4.4746E+02 -1.8801E+02 05 -1.0235E+02 -6.5528E+02 9.3456E+02 -1.1173E+03 06 3.4392E+01 -6.3176E+02 -7.0872E+01 -3.0314E+02 07 -3.0565E+02 2.5086E+01 -1.0337E+02 -1.5673E+02 08 -1.8138E+02 -1.3772E+02 -3.7010E+00 -3.9448E+01 09 -1.4572E+02 -1.8489E+02 4.3701E+02 4.0368E+02 10 -1.2063E+02 3.6102E+01 -3.3745E+02 8.6753E+02 11 -I.0328E+02 1.2899E+02 -2.2596E+02 5.2639E+02 12 -9.7196E+01 1.1642E+01 7.2232E+01 -8.9739E+01 13 1.7101E+02 1.8439E+02 4.2858E+01 2.8564E+01 14 4.9314E+00 1.1685E+02 1.5956E+01 1.8508E+01 15 2.7090E+01 -1.0651E+02 5.6362E+01 -3.8386E+01 16 1.4462E+02 -1.7567E+02 7.1774E+01 -3.0666E+01 17 2.7711E+02 7.0001E+01 -1.1068E+02 2.1121E+01 18 -1.3087E+02 -6.6501E+01 -2.2375E+02 9.9383E+01 19 -4.9417E+01 -8.9040E+01 -8.4921E+01 -6.6655E+01 20 1.1983E+01 -6.5594E+01 7.1131E+00 3.1559E+01 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 2.1573E+04 3.9693E+03 I/2PP 3.2187E+03 1.5045E+04 Nth COSINE SINE COSINE SINE 01 1.1659E+03 1.0203E+02 -1.1843E+04 8.2020E+03 02 -1.3474E+03 9.3442E+02 5.7735E+02 7.6503E+02 03 3.0609E+02 -3.0464E+02 1.0999E+03 -7.2920E+02 04 1.1476E+02 -1.4812E+02 1.1552E+02 -3.3053E+02 05 -8.1902E+01 9.2596E+01 3.5582E+02 -1.5693E+02 06 -6.5032E+01 1.0228E+02 8.5999E+00 -1.1105E+02 07 7.8780E+01 2.0033E+02 -7.0973E+01 -5.9878E+01 08 1.7771E+02 6.7615E+01 -1.2945E+01 1.3711E+01 09 1.6440E+02 6.8588E+01 7.5127E+01 5.0791E+01 10 8.2392E+01 -3.5983E+01 -1.2257E+01 1,2635E+02 11 1.3307E+02 -9.0045E+01 3.2882E-01 1.0112E+02 12 6.7200E+01 2.4541E+01 -1.0594E+00 7.2555E-01 13 -5.9771E+01 -1.7975E+02 1.5338E+01 -3.2635E+01 14 -2.7993E+01 -6.1964E+01 1.0063E+01 6.5851E+00 15 -2.0918E+01 1.0168E+02 7.4215E+00 -1.3243E+01 16 -9.7940E+01 1.9253E+02 -4.9149E-01 -1.7328E+01 17 -2.8713E+02 -7.4978E+01 -1.3696E+01 -3.7392E+01 18 1.7272E+02 6.2602E+01 3.1221E+01 7.7189E+00 19 5.4783E+01 8.1219E+01 -1.3542E+01 1.6926E+01 20 -3.8141E+00 4.5504E+01 -1.3576E+01 1.7732E+01 Edg.Bending @19.54%R, Flat.Bending @19.54%R, in-lb in-lb 1.0587E+03 MEAN 1.9552E+04 1.1491E+04 1/2PP 2.9645E+03 COSINE SINE Nth COSINE SINE -8.1268E+03 7.4944E+03 01 -3.7896E+02 6.2708E+02 8.4372E+02 3.5725E+02 02 -7.2478E+02 5.4578E+02 3.4292E+02 -7.1878E+02 03 -6.3860E+02 4.9042E+02 1.7822E+02 -5.2477E+02 04 -7.0531E+02 -9.8784E+01 -9.8231E+00 2.1344E+01 05 -5.7935E+01 2.3444E+02 -2.4578E+01 -3.2762E+01 06 -9.7193E+01 2.6995E+02 -1.4479E+02 -8.5250E+01 07 1.8961E+02 1.3038E+02 -7.6908E+01 1.4269E+01 08 1.8505E+02 3.6078E+01 -2.0743E+02 -1.2345E+02 09 1.4570E+02 8.7074E+01 5.4585E+01 -3.0953E+02 10 8.2057E+01 -1.0252E+02 4.7831E+01 -1.6473E+02 11 8.5519E+01 -1.6489E+02 -8.7480E+00 2.8895E+01 12 4.9543E+01 -1.5861E+01 -4.5336E+00 3.9139E+00 13 -1.1976E+02 -1.0674E+02 8.9078E+00 -1.1511E+01 14 -9.0811E+00 -6.3486E+00 -3.7990E+00 7.2712E+00 15 -5.3264E+00 4.2947E+01 -8.8815E+00 4.0493E-01 16 -1.9417E+01 8.8126E+01 3.8597E+01 -8.7561E+00 17 -7.1809E+01 3.0615E+00 8.0282E+01 -8.3544E+01 18 4.0625E+01 -6.5423E-02 4.9070E+01 3.0960E+01 19 1.2709E+01 -8.8780E+00 4.6567E+00 -1.6242E+01 20 6.8032E+00 -5.9646E+00 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb -3.9841E+03 MEAN 1.3132E+04 1.1393E+04 I/2PP 2.8054E+03 Nth COSINE SINE COSINE SINE 01 -4.0049E+02 -1.6877E+02 -6.1176E+03 8.5115E+03 02 -6.9294E+02 4.1570E+01 1.1675E+03 2.1125E+02 03 -1.1967E+03 8.1916E+02 -3.6478E+02 -7.9014E+02 04 -9.0133E+02 -7.0521E+01 3.6449E+02 -7.2580E+02 05 -7.6558E+00 1.4815E+02 -5.3584E+02 1.6406E+02 06 -4.5562E+01 1.9322E+02 -9.7910E+01 1.1335E+02 07 1.6200E+02 -4.6683E+01 -5.1516E+01 6.4601E+01 08 -4.0304E+00 -8.2960E+01 -5.8626E+00 1.4425E+01 09 -2.0716E+01 -4.1539E+01 -2.6823E+02 -1.5618E+02 10 -2.6840E+01 -6.7718E+01 1.0205E+02 -4.6256E+02 11 -9.6835E+01 -6.4261E+01 1.0764E+02 -2.9147E+02 12 -3.6809E+01 -6.4510E+01 1.2239E+01 3.1128E+01 13 9.5952E-02 1.1647E+02 -4.7726E+01 4.5409E+01 14 3.0765E+01 6.4152E+01 -2.6745E+01 -5.1331E+01 15 1.3635E+01 -6.1641E+01 -2.9703E+01 8.2227E+01 16 7.7267E+01 -1.4756E+02 -5.1037E+01 8.0491E+01 17 2.2938E+02 6.6029E+01 -9.5715E+01 5.9885E+01 18 -1.4696E+02 -4.2358E+01 -4.5096E+01 6.2908E+01 19 -5.1605E+01 -6.3830E+01 1.2737E+01 1.6637E+00 20 4.4497E-01 -3.8887E+01 1.2797E+01 -2.1189E+01 Flat.Bending @48%R, Edg.Bending @48%R, In-lb in-lb MEAN 5.0598E+03 -1.9644E+03 1/2PP 3.4977E+03 8.0274E+03 Nth COSINE SINE COSINE SINE 01 -2.8414E+02 -1.4335E+03 -3.6914E+03 4.8137E+03 02 -1.2510E+03 -2.9398E+02 1.0366E+03 -7.6005E+00 03 -1.0254E+03 7.1827E+02 -1.1968E+03 -7.6039E+02 04 -3.5781E+02 3.0095E+01 4.5656E+02 -5.9142E+02 05 8.4938E+01 -7.7575E+01 -1.0573E+03 2.5053E+02 06 -1.8849E+01 -1.0681E+02 -8.3070E+01 2.1916E+02 07 -3.1532E+01 -1.2699E+02 2.2972E+02 4.1757E+02 08 -6.4629E+01 5.4771E+00 1.5795E+02 -1.5594E+01 09 -8.5976E+01 -6.4907E+00 8.0040E+01 8.1858E+01 10 -3.9418E+01 6.7712E+01 -2.0985E+01 9.9996E+01 11 4.2690E+01 1.5473E+02 2.1675E+01 -5.0832E+00 12 -4.6811E+00 8.4761E+01 2.6972E+01 -3.5590E+01 13 3.7770E+01 1.5189E+01 -5.0044E+01 1.4184E+01 14 -3.5573E+01 -5.9313E+01 -4.4233E+01 -5.1717E+01 15 7.6243E+00 1.4929E+01 -3.8183E+01 8.8910E+01 16 -5.3063E+01 8.1424E+01 -6.9637E+01 8.0108E+01 17 -1.6381E+02 -5.2901E+01 -2.2094E+02 2.8602E+01 18 9.8409E+01 2.8007E+01 -2.1277E+02 2.4139E+02 19 3.8396E+01 4.8298E+01 -9.3213E+01 -5.3257E+01 20 1.4061E-01 2.3907E+01 -1.3615E+01 2.8938E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -2.8897E+02 8.6473E+03 I/2PP 3.5037E+03 4.8592E+03 Nth COSINE SINE COSINE SINE 01 -3.6601E+02 -1.2853E+03 -1.6197E+03 2.0434E+03 02 -1.8966E+03 -3.3425E+02 9.9113E+02 -3.3903E+02 03 -5.5625E+02 4.9427E+02 -1.3908E+03 -3.7344E+02 04 3.2173E+02 7.1632E+00 6.2411E+02 -3.1857E+02 05 3.4581E+01 -2.5064E+01 -8.8033E+02 4.0086E+01 06 8.0730E+01 -1.0244E+02 -1.1229E+02 1.6717E+02 07 -1.2676E+02 1.1106E+01 3.7491E+02 5.0430E+02 08 -5.8275E+01 5.2726E+01 2.7670E+02 -4.4835E+00 09 3.1463E+01 5.5350E+01 3.8874E+02 2.4202E+02 10 4.8290E+01 9.6312E+00 -1.0381E+02 4.7865E+02 11 1.1347E+01 -1.0420E+02 -7.8291E+01 2.5381E+02 12 2.4092E+01 -7.6069E+01 8.3177E+00 -1.7061E+01 13 -3.0417E+01 -1.1721E+02 -2.3999E+01 -2.7635E+01 14 1.7491E+01 3.7581E+01 2.8221E+00 5.3049E+01 15 -3.1670E+01 2.3908E+01 2.8042E+00 -2.0796E+01 16 2.3808E+01 -2.4317E+01 3.1518E+01 -3.5928E+01 17 9.2264E+01 3.3383E+01 8.1247E+01 -2.5509E+01 18 -3.5170E+01 -1.1698E+01 4.6553E+01 -8.9804E+01 19 -2.8563E+01 -2.7239E+01 -5.5571E+00 7.9867E+00 20 -4.7548E+00 -2.3138E+01 -1.1626E+01 -6.4235E-01 Edg.Bending @81%R, Flat.Bending @81%R, in-lb in-lb -5.0954E+03 MEAN -4.7327E+03 2.7530E+03 I/2PP 3.2537E+03 SINE Nth COSINE SINE COSINE 5.4070E+02 01 -4.7439E+01 -3.9681E+02 -5.9381E+02 -3.6649E+02 02 -2.2782E+03 -1.6705E+02 3.7798E+02 -2.7668E+02 03 -3.0780E+02 1.8518E+02 -9.9801E+02 4.1883E+01 04 8.6159E+02 -2.4266E+02 5.1048E+02 -1.1932E+02 05 9.8549E+00 -1.8575E+02 -2.4206E+02 -1.9764E+01 06 -2.7420E+01 4.0569E+01 -8.3875E+01 3.0239E+02 07 1.8924E+01 1.8108E+02 2.0222E+02 -6.0532E+00 08 7.8175E+01 -5.3592E+01 2.1123E+02 1.5664E+02 09 4.8794E+00 -6.8554E+01 3.3431E+02 2.9456E+02 i0 -2.9752E+01 -3.2959E+01 -6.4932E+01 1.7208E+02 ii -2.7308E+01 3.3160E+01 -I.1795E+02 4.6996E+00 12 -7.4921E+00 1.9419E+01 -2.1815E+01 2.1372E+01 13 2.2626E+01 1.0595E+02 5.3216E+01 6.8548E+01 14 -1.9838E+01 1.5474E+00 7.0076E+01 -1.3524E+02 15 1.4794E+01 -4.2942E+01 6.3592E+01 -1.1789E+02 16 7.1751E+00 -1.4814E+01 8.7032E+01 -4.1991E+01 17 -4.1152E+01 1.1299E+01 2.1318E+02 -2.5076E+02 18 -5.1521E+00 1.1838E+01 2.3193E+02 6.7402E+01 19 5.1672E+00 -3.1740E+00 I.I166E+02 -4.2151E+01 20 1.8009E+01 -6.1281E-01 2.0002E+01 Collective Control Longitudinal Cyclic Load, ib Load, ib 1.5833E+02 -1.3692E+03 MEAN 1.6447E+02 I/2PP 1.9830E+03 COSINE SINE Nth COSINE SINE 2.4333E+00 1.5794E+01 01 -5.8761E+00 -6.1290E+01 1.5820E+00 7.6835E+00 02 -7.3858E+00 1.9520E+00 2.0788E+00 -7.4254E+00 03 -5.6144E+01 1.1469E+00 1.1437E+02 -5.0488E+01 04 -1.5576E+03 8.3732E+02 -I.I156E+01 2.9907E+00 05 8.3832E+01 -6.5753E+01 -2.1744E+00 -8.0539E+00 06 -1.5656E+01 5.6546E+01 -5.6989E+00 6.4977E+00 07 4.9052E+01 -3.0765E+01 -5.7669E+00 -I.0849E+01 08 -6.8840E+01 2.3639E+02 -5.3946E+00 -1.0855E+00 09 7.4345E+00 -3.2270E+01 -1.4961E+00 2.6408E+00 10 2.0759E+01 1.1803E+01 -1.9031E+00 11 4.8614E+01 -1.3166E+01 -6.7769E+00 -1.4131E+01 12 -6.8210E+00 4.6552E+01 -4.7908E+00 3.4310E+00 -2.9816E+00 13 -1.5767E+01 -3.8692E-01 -2.4037E+00 2.2902E-01 14 1.3094E+00 -1.0709E-01 1.3761E+00 -2.7103E-01 15 1.0638E+01 -8.3950E+00 2.1653E+00 9.6453E-01 16 2.4800E+01 -1.5323E+00 7.5292E-01 6.8392E-01 17 -1.4949E+01 -4.8236E-01 6.7549E-01 -8.2922E-01 18 6.2740E-02 1.0414E+01 1.4694E+00 9.4006E-01 19 -4.4651E+00 -6.8036E+00 4.5610E-02 -2.9998E+00 20 1.1959E+00 -2.2415E+01 Lateral Cyclic Load, Spider Arm Load, ib ib -2.1402E+02 -5.9979E+01 MEAN I/2PP 1.6321E+02 4.5940E+02 Nth COSINE SINE COSINE SINE 01 -7.7033E+00 4.4270E+00 1.2481E+02 1.8211E+02 02 1.2059E+01 -4.5235E+00 7.1207E+01 -2.4921E+00 03 8.8139E-01 1.4889E+00 -6.4624E+01 1.8233E+01 04 7.5455E+01 -8.1193E+01 -I.0048E+02 7.8409E+01 05 -6.8820E+00 1.7307E+01 -5.2606E+00 6.7589E+01 06 4.4856E+00 -1.4064E+00 3.1476E+01 3.8006E+01 07 -3.6582E-01 -1.6010E+00 -2.9098E+01 1.3263E+01 08 2.9676E+01 -4.0624E+00 -1.0449E+01 1.5106E+01 09 4.1378E+00 -1.1446E+00 1.1456E+00 4.7709E+00 10 1.3473E+00 -2.5688E+00 6.6259E+00 1.5406E+01 11 -3.8782E+00 4.8748E-01 5.1346E-01 1.1810E+01 12 -5.3527E-01 -1.3249E+01 1.3305E+00 -2.1174E+00 13 5.6738E+00 4.7316E+00 1.0979E+01 -2.5987E+00 14 1.6874E-01 -2.4592E+00 -1.4773E+00 -1.4502E+01 15 -7.1683E-01 1.2352E+00 -2.0546E+00 5.2833E-02 16 -9.4305E+00 6.4267E+00 -5.4367E+00 -8.4187E-01 3.5986E+00 -4.7201E-01 17 -3.3447E-01 2.8140E-02 18 8.5515E-01 2.4602E-01 -4.2119E+00 -2.0120E+00 19 -7.9381E-01 4.2016E-01 7.4797E-01 1.4699E+00 20 1.6911E+00 8.7098E-01 8.1266E-01 3.7472E+00 Blade Feathering Lag Damper Load, ib Angle, deg MEAN 1.6201E+01 4.9437E+02 1/2PP 4.9338E+00 1.3731E+03 Nth COSINE SINE COSINE SINE 01 2.0681E+00 -4.1542E+00 2 .3823E+02 1.4272E+03 02 4.8694E-01 5.7340E-01 1 .8080E+02 -3.4779E+01 03 7.9106E-03 -5.4763E-02 3 .0255E+01 1.1988E+02 04 -3.9791E-01 2.1313E-01 2 .9729E+01 -1.8734E+01 05 7.5844E-02 6.4137E-02 -6 .4501E+00 -5.3501E+01 06 2.3399E-02 -1.0798E-03 -1 .8378E+01 4.7066E+00 07 -4.2877E-02 -1.4777E-02 -2 .6499E+01 -2.5951E+01 08 -1.3105E-03 7.9504E-02 -1 .1357E+01 -7.2224E+00 09 3.1594E-02 2.6158E-02 -1 .6555E+01 -2.9735E+00 10 -4.5132E-02 8.7395E-02 -1 .2442E+01 -2.1546E+01 11 -2.0807E-02 6.1293E-02 -i .0299E+01 -1.2963E+01 12 8.8059E-03 -3.8798E-04 8 .8819E+00 -7.4320E+00 13 4.2256E-02 -2.5254E-02 -6 .8408E+00 -3.4943E+00 14 -4.1526E-03 -1.4958E-03 2 .8446E+00 8.5366E-01 15 7.7023E-03 -9.4896E-03 6 .2722E+00 -4.0143E+00 16 -6.2546E-03 1.0250E-03 9 .8529E+00 5.7246E+00 17 -9.2773E-03 -1.4592E-02 -3 .4860E+00 7.3544E-01 18 -1.1682E-02 4.9576E-04 7 .6121E+00 -2.3683E+01 19 4.6166E-03 -3.2256E-03 I .1528E+01 -1.3149E-01 20 6.0665E-04 1.4027E-02 5 .9678E+00 -1.8503E+00 MR Shaft Torque, in-lb MEAN 1.8460E+05 1/2PP 9.9288E+03 Nth COSINE SINE 01 -5.4051E+02 -4.0809E+02 02 4.6949E+03 4.7393E+03 03 -4.7794E+02 6.3380E+02 04 3.1120E+03 2.4998E+03 05 -1.7110E+00 1.6955E+02 06 -6.7374E+02 8.1291E+02 07 2.5345E+02 3.0332E+02 08 4.4242E+01 -2.4072E+02 09 -7.8811E+01 6.5407E+01 10 -2.0202E+02 4.3524E+02 11 4.3773E+01 -1.0150E+02 12 -2.2664E+02 5.5498E+02 13 7.7413E+01 2.2321E+01 14 -1.2238E+02 1.9023E+02 15 2.0911E+01 -3.4769E+01 16 -3.6799E+01 8.4368E+01 17 2.2908E+01 -3.0358E+01 18 6.7029E+01 2.0474E+02 19 -2.3637E+01 -6.8120E+01 20 2.5726E+01 6.0761E+00 Flight 504, Condition D Flat.Bending @3.2%R, Edg.Bending @6.8%R, in-lb in-lb 2.1857E+03 MEAN 3.1746E+04 3.2649E+04 1/2PP 1.2112E+04 COSINE SINE Nth COSINE SINE -1.7289E+04 2.1940E+04 01 6.9905E+02 1.0799E+03 2.1821E+03 1.2804E+03 02 -5.6813E+03 -7.9103E+02 3.3047E+03 1.6825E+02 03 3.5307E+03 -3.9726E+03 4.7690E+02 -5.7981E+01 04 2.9360E+03 -1.1538E+03 1.0391E+03 -1.1912E+03 05 3.6383E+02 -2.8545E+02 8.7721E+01 -3.7800E+02 06 1.7321E+02 -8.4758E+02 -1.5127E+02 -1.7233E+02 07 -2.5995E+02 -3.6732E+02 -1.3991E+01 5.9666E+01 08 2.6121E+02 -3.4144E+02 5.7157E+02 2.2638E+02 09 -2.1482E+02 -4.1348E+02 -9.9522E+02 5.1474E+02 10 -1.5328E+02 -1.2782E+01 -6.9525E+02 7.8908E+02 11 -1.2565E+02 2.6320E+02 2.8817E+02 6.3923E+00 12 -6.0452E+02 3.3465E+02 9.0737E+00 9.7734E+01 13 9.2412E+01 1.3687E+02 -2.8247E+01 1.5945E+02 14 -9.9452E+01 3.0746E+02 -4.0867E+01 2.2331E+01 15 -1.4768E+01 8.4458E+01 1.0759E+02 8.9687E+00 16 9.5802E+01 -2.1004E+02 -1.7197E+02 8.6672E+01 17 7.3533E+02 -1.5706E+02 -1.1317E+02 1.6471E+02 18 -7.5297E+01 1.1342E+02 -2.8548E+01 1.0390E+02 19 -9.5095E+01 -6.1768E+01 -2.2093E+01 1.2015E+01 20 -2.7469E+00 -1.2374E+02 Flat.Bending @14.2%R, Edg.Bending @14.2%R, in-lb in-lb MEAN 2.1411E+04 4.4891E+03 I/2PP 3.9517E+03 1.5854E+04 Nth COSINE SINE COSINE SINE 01 7.2186E+02 1.3144E+02 -1.2079E+04 9.2565E+03 02 -1.5531E+03 7.3948E+02 4.9646E+02 8.9175E+02 03 3.1784E+02 -3.5313E+02 1.0673E+03 -8.6524E+02 04 1.4602E+02 -1.7939E+02 5.3244E+01 -3.0564E+02 05 -2.2529E+02 -2.0181E+01 3.4485E+02 -2.2236E+02 06 -1.5324E+02 1.1651E+02 4.9075E+01 -1.4219E+02 07 -2.5818E+01 4.7711E+02 -5.0742E+01 -1.3775E+02 08 -1.2492E+02 1.7501E+02 -6.2693E+01 1.1113E+01 09 9.2029E+01 1.8865E+02 7.2321E+01 3.5938E+01 10 9.1084E+01 1.2902E+01 -1.0678E+02 8.5394E+01 11 1.9689E+02 -1.7362E+02 -7.1872E+01 1.0606E+02 12 4.4837E+02 -1.6736E+02 1.4375E+02 1.9919E+01 13 3.1042E+01 -1.9198E+02 2.4830E+00 -1.6167E+01 14 1.8304E+01 -2.3100E+02 -4.7716E+00 4.0631E+01 15 -2.3658E+00 -4.0914E+01 -1.6179E+01 1.0827E+01 16 -4.0024E+01 2.0881E+02 2.2647E+01 3.0733E+01 17 -7.4355E+02 1.7109E+02 -8.4010E+01 -3.4031E+01 18 6.9659E+01 -1.6510E+02 3.0914E+01 -4.7467E+01 19 1.2873E+02 2.2732E+01 1.3729E+01 2.1079E+01 20 -7.0340E+00 8.4033E+01 -1.8901E+01 2.1326E+01 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.9484E+04 1.4223E+03 1/2PP 3.6763E+03 1.2359E+04 Nth COSINE SINE COSINE SINE 01 -6.2994E+02 7.4829E+02 -8.1710E+03 8.2171E+03 02 -7.8651E+02 4.6246E+02 8.2802E+02 4.6574E+02 03 -5.7487E+02 5.1028E+02 3.3798E+02 -7.6150E+02 04 -6.7877E+02 2.0327E+01 1.3117E+02 -6.0314E+02 05 -3.4373E+02 -2.2421E+01 3.4569E+01 2.0599E+01 06 -2.5986E+02 3.3364E+02 3.5885E+01 -3.0153E+01 07 9.1206E+01 4°8783E+02 -1.2004E+02 -2.5667E+02 08 -1.6713E+02 1.8265E+02 -5.0600E+01 2.9427E+01 09 1.3154E+02 2.6469E+02 -2.5077E+02 -I.0508E+02 10 1.4802E+02 -1.0348E+01 2.8234E+02 -1.9274E+02 11 1.4323E+02 -2.6101E+02 1.6691E+02 -2.5781E+02 12 3.7457E+02 -2.4410E+02 -5.7552E+01 5.0376E+00 13 -7.2491E+01 -1.0324E+02 1.4383E+01 -8.9387E+00 14 -8.1767E+00 -7.2015E+01 2.5046E+01 -4.2271E+01 15 6.8690E+00 -5.2897E+01 3.1279E+01 -2.2948E+01 16 5.1524E+00 8.9336E+01 7.4721E+00 -1.4382E+01 17 -1.5612E+02 9.3702E+01 7.9871E+01 -5.6419E+01 18 1.4715E+01 -3.3659E+01 1.7917E+01 -1.0050E+02 19 5.8783E+00 -2.0165E+01 1.7168E+01 -6.2704E+01 20 -3.5202E-01 -2.0299E+01 1.5212E+01 -3.5672E+00 Edg.Bending @31%R, Flat.Bending @31%R, in-lb in-lb -3.6592E+03 MEAN 1.3080E+04 1.1790E+04 1/2PP 3.3576E+03 COSINE SINE Nth COSINE SINE -6.0994E+03 9.0373E+03 01 -3.7237E+02 -8.9344E+01 1.1707E+03 2.8833E+02 02 -6.7055E+02 1.5224E+01 -3.2937E+02 -7.7968E+02 03 -1.1290E+03 8.7297E+02 3.6509E+02 -9.4701E+02 04 -8.8549E+02 8.8247E+01 -4.8548E+02 1.6870E+02 05 -2.3456E+02 -5.0229E+01 -1.1410E+02 1.6494E+02 06 -1.8166E+02 2.5346E+02 -7.1127E+01 1.4614E+01 07 1.8727E+02 1.2088E+02 08 -3.9607E+01 4.1123E+01 -1.1606E+01 5.3002E+01 -3.1777E+02 -1.4911E+02 09 2.5963E+01 8.6923E+00 4.4081E+02 -2.6686E+02 10 3.0079E+01 -3.3550E+01 3.4856E+02 -4.1981E+02 11 -1.2838E+02 -2.3779E+01 -1.4726E+02 -4.5652E+01 12 -2.7977E+02 -3.1885E+01 2.0434E+01 6.3138E+00 13 -8.2122E+01 1.0845E+02 1.5922E+01 -1.4024E+02 14 -2.4106E+01 1.7518E+02 3.2434E+01 -8.2309E+00 15 1.0454E+01 2.5110E+01 -7.6082E+01 1.7452E+01 16 2.4209E+01 -1.6755E+02 -1.5403E+02 1.5100E+02 17 6.0870E+02 -1.3610E+02 -2.9901E+01 9.6422E+01 18 -5.2615E+01 1.4208E+02 1.4958E+01 1.0784E+01 19 -9.7043E+01 -7.5320E+00 2.0500E+01 -5.2893E+00 20 -1.0221E+01 -5.8997E+01 Edg.Bending @48%R, Flat.Bending @48%R, in-lb in-lb -1.7557E+03 MEAN 5.0133E+03 8.9548E+03 I/2PP 3.5292E+03 COSINE SINE Nth COSINE SINE -3.7257E+03 5.1588E+03 01 -2.0032E+02 -1.4277E+03 1.0489E+03 2.9357E+00 02 -1.2385E+03 -2.3000E+02 03 -1.0079E+03 7.1266E+02 -1.2615E+03 -6.4943E+02 5.2886E+02 -8.6411E+02 04 -3.7864E+02 8.5270E+01 -1.0425E+03 2.6171E+02 05 1.0420E+02 -7.7815E+01 -2.7166E+02 3.0888E+02 06 7.1487E+01 -1.3609E+02 1.8749E+02 7.3973E+02 07 7.9940E-01 -3.8495E+02 1.2800E+02 -7.5240E+00 08 1.8465E+02 -1.4334E+02 8.7457E+01 2.3966E+00 09 -6.6787E+01 -1.2513E+02 -1.2472E+02 9.9949E+01 10 -1.0695E+02 -1.6508E+01 2.1968E+01 2.6510E+01 11 1.6069E+01 1.4516E+02 -3.2896E+01 -3.2239E+01 12 -2.2751E+01 2.2553E+02 -5.2015E+01 -3.7942E+01 13 8.8842E+01 6.8991E+01 -6.0314E+01 -8.7975E+01 14 -2.0712E+00 -5.4110E+01 -6.0636E+01 2.8623E+01 15 -1.1296E+01 -1.1775E+01 -1.4488E+02 8.9753E+01 16 -1.4440E+01 1.0430E+02 -5.1475E+02 2.1162E+02 17 -4.3453E+02 7.9470E+01 -5.0302E+01 2.7925E+02 18 3.6311E+01 -1.0357E+02 -3.0827E+01 1.4788E+02 19 6.8044E+01 6.3181E+00 -2.7460E+01 6.1116E+00 20 4.4006E+00 4.2788E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -3.5624E+02 1.5830E+02 1/2PP 3.7574E+03 6.0133E+03 Nth COSINE SINE COSINE SINE 01 -2.4096E+02 -1.2798E+03 -1.6204E+03 2.5642E+03 02 -2.0082E+03 -2.9955E+02 1.0045E+03 -3.7037E+02 03 -5.5249E+02 5.0770E+02 -1.4930E+03 -2.5250E+02 04 3.1994E+02 -8.1515E+01 6.8241E+02 -4.6441E+02 05 8.9851E+01 8.2873E+01 -8.3910E+02 1.2809E+02 06 1.3151E+02 -6.8842E+01 -3.0599E+02 2.4190E+02 07 -9.7884E+01 -7.9214E+01 3.0496E+02 9o4586E+02 08 -7.2656E+01 1.1841E+00 1.3918E+02 2.2997E+01 09 -3.0891E+01 7.2149E+01 4.3569E+02 2.1543E+02 10 5.1376E+01 9.7707E+01 -4.8367E+02 3.2890E+02 11 6.7825E+01 -8.6606E+01 -3.1785E+02 3.3707E+02 12 2.4555E+02 -2.3706E+02 1.4288E+02 -1.7477E+01 13 -2.2877E+01 -1.9545E+02 -8.4433E+01 -3.7583E+01 14 8.2363E+00 -5.2743E+01 -5.3342E+01 1.0304E+02 15 -1.9919E+01 6.3772E+00 -5.7881E+01 -6.7509E+00 16 -8.9465E+00 -3.4790E+01 5.4601E+01 -6.0352E+00 17 2.2467E+02 -1.6726E+01 1.7034E+02 -1°2061E+02 18 -2o9949E+00 5.1534E+01 1.7588E+01 -1.2284E+02 19 -3.7942E+01 1.9713E+00 -2.1316E+01 -5.5998E+01 20 -1.0387E+01 -3.3291E+01 -2.0223E+01 -5.3790E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.7325E+03 -5.1398E+03 1/2PP 3.5102E+03 3.1209E+03 Nth COSINE SINE COSINE SINE 01 -3.5038E+00 -4.2931E+02 -5 .9145E+02 6.4626E+02 02 -2.4096E+03 -1.8551E+02 4 .2945E+02 -3.5947E+02 03 -3.5667E+02 1.2891E+02 -1 .0518E+03 -2.4512E+02 04 8.8408E+02 -3.0529E+02 5 .3105E+02 -5.2207E+01 05 8.9527E+01 -1.5112E+02 -1 .7946E+02 -5.2328E+01 06 -1.2877E+02 1.6383E+01 -1 .7166E+02 -4.1621E+01 07 -2.3552E+01 4.2015E+02 1 .0496E+02 6.0750E+02 08 -6.3128E+01 9.2393E+01 4 .9619E+01 4.8110E+01 09 6.7243E+01 -2.2599E+01 3 .7687E+02 2.1775E+02 10 6.6035E+00 -8.3667E+01 -2 .9447E+02 1.5384E+02 11 -7.3719E+01 8.7280E+00 -2 .9833E+02 2.0160E+02 12 -1.8324E+02 1.2801E+02 6 .1768E+01 4.8900E+01 13 9.4364E+00 1.4882E+02 -1 .2053E+01 8.8753E+01 14 -9.0509E+00 8.0783E+01 5 .7335E+01 2.0493E+02 15 9.6812E+00 -1.6812E+01 7 .0442E+01 -5.6195E+01 16 2.?356E+01 -1.7236E+01 1 .7946E+02 -1.1078E+02 17 -8.5756E+01 2.6366E+01 4 .7629E+02 -2.6583E+02 18 -2.6158E+01 -1.8393E+00 3 .7294E+01 -2.9878E+02 19 3.1385E-01 -1.1814E+01 3 .7194E+01 -1.6086E+02 20 1.7875E+01 -3.4876E+00 4 .5611E+01 -7.8441E+00

]94

Collective Control Longitudinal Cyclic Load, ib Load, ib 1.9216E+02 MEAN -1.5540E+03 1.9717E+02 I/2PP 2.3612E+03 SINE Nth COSINE SINE COSINE 1.3307E+01 01 2.5199E+01 -6.5038E+01 9.6495E-01 5.7839E+00 02 -4.8515E+01 -1.0266E+01 3.9305E+00 -6.8717E+00 03 5.8442E+00 -1.7993E+01 6.7512E-01 -7.5292E+01 04 -1.6143E+03 1.1137E+03 1.3246E+02 -2.6962E+00 05 8.5520E+01 -1.8071E+01 -1.2142E+01 -7.5751E+00 06 3.3332E+00 5.1501E+01 -2.9961E+00 4.5222E+00 07 7.9519E+01 -2.3360E+01 -1.1124E+01 1.8020E+00 08 4.9231E+01 1.6364E+02 -9.7511E+00 -3.6192E+00 09 -1.3602E+01 -1.2162E+01 -2.7802E+00 8.7305E-01 10 1.0872E+01 -3.2485E-01 -9.6257E-01 -4.8769E+00 11 5.5149E+01 1.8541E+01 -4.9726E+00 -2.3949E+01 12 -5.0142E+01 1.6633E+02 7.2241E+00 -7.7147E-01 13 -2.0410E+01 1.5030E+01 4.7404E+00 8.5286E-01 14 2.4255E+00 -1.4370E+01 1.5951E-01 -1.0579E+00 15 1.0787E+01 5.9626E+00 -5.8950E-01 -5.0814E+00 16 5.1564E+01 8.0703E+00 6.6803E+00 1.4646E-01 17 -1.6150E+01 8.2592E+00 4.0930E-01 -2.5425E-01 18 -2.1135E+00 7.0169E-01 4.6107E-01 1.4625E+00 19 -3.0237E+00 1.6718E+00 2.2203E+00 4.3082E+00 20 -1.5969E+01 -5.2732E+01 3.4257E+00 Spider Arm Load, Lateral Cyclic Load, ib ib -7.4844E+01 MEAN -2.2830E+02 5.5797E+02 I/2PP 1.9596E+02 SINE COSINE Nth COSINE SINE 2.0802E+02 1.3229E+02 01 -8.9811E+00 6.2426E+00 1.0852E+01 8.6459E+01 02 1.3013E+01 -5.4439E+00 2.9051E+01 -6.4543E+01 03 -2.2785E+00 4.2311E+00 1.0325E+02 -9.9446E+01 04 8.0104E+01 -1.1937E+02 9.1011E+01 -2.0635E-01 05 -7.5869E+00 1.5580E+01 4.1838E+01 6.3106E+01 06 3.0531E+00 3.9549E+00 -2.6433E+01 1.6939E+00 07 -1.3660E+00 -4.0418E+00 -1.4298E+01 9.4713E+00 08 1.1327E+01 8.6447E+00 8.1840E-01 2.4136E+00 09 9.3288E+00 -1.3477E+00 7.5163E+00 1.0418E+01 10 8.8659E-01 -5.5555E-01 9.2875E+00 6.9590E+00 11 -5.5896E+00 -3.0634E-01 -8.3263E+00 2.6993E+00 12 -9.5107E+00 -2.2621E+01 1.5474E+01 3.1951E-01 13 2.9083E+00 1.4464E+00 -2.8334E+01 1.2297E+01 14 -2.4505E+00 1.6990E+00 2.4236E+00 1.9409E-01 15 1.6791E+00 -2.4615E+00 -6.8220E+00 2.2855E+00 16 -1.6863E+01 9.4257E+00 -4.4201E+00 17 -1.4839E+00 -6.3505E-02 5.6614E+00 -1.7922E+00 2.9955E+00 18 2.3923E+00 3.3186E-01 -2.4639E+00 3.4331E+00 19 -1.7998E+00 4.7236E-0_ 4.4783E+00 7.0296E+00 20 -2.1359E+00 2.6903E+00 Blade Feathering Damper Load, Lag Ib Angle, deg MEAN 1.6461E+01 4.9529E+02 I/2PP 5.3980E+00 1.3696E+03 Nth COSINE SINE COSINE SINE 01 2.2399E+00 -4.4196E+00 3.4216E+02 1.4129E+03 02 5.4469E-01 5.5570E-01 1.9329E+02 -4.4694E+01 03 3.6704E-02 1.2263E-02 7.6021E+01 1.2427E+02 04 -4.1740E-01 2.7915E-01 4.6891E+01 -2.6166E+01 05 9.4271E-02 1.6435E-01 6.6426E+00 -5.3763E+01 06 8.8313E-02 -1.4608E-02 -6.6713E+00 1.1273E+01 07 -3.0922E-02 -4.3917E-02 -3.6564E+01 -3.5032E+01 08 -7.8242E-03 6.2723E-02 -6.9969E+00 2.4249E+01 09 4.1851E-02 3.8317E-02 -1.3079E+01 3.0157E+00 10 -9.0373E-02 5.1084E-02 1.8234E-01 -1.3376E+01 11 -4.2860E-02 9.6369E-02 -1.3004E+01 -8.5494E+00 -2.7879E+01 12 4.4490E-02 1.9085E-02 1.0981E+01 13 5.1162E-02 -2.3003E-02 -1.0046E+00 -4.3089E+00 14 1.1728E-02 -1.1077E-02 7.7695E+00 -9.9926E-01 15 1.1692E-02 -2.6683E-03 6.9492E+00 -1.3851E+01 16 -6.5107E-03 -4.1788E-03 2.4707E+01 -3.3432E+00 17 -2.9326E-02 -5.0454E-03 6.9652E+00 -4.4280E+00 18 -1.8732E-02 -2.2900E-03 -1.1371E+01 -2.0686E+01 19 1.8102E-03 9.1199E-03 6.0232E+00 -1.5242E+01 20 -2.1629E-03 5.6230E-03 2.9898E+00 -2.5183E+00 MR Shaft Torque, in-lb MEAN 1.8953E+05 1/2PP 1.3060E+04 Nth COSINE SINE 01 2.9300E+02 -8.6799E+02 02 5.7926E+03 6.0191E+03 03 -2.8330E+02 4.8176E+02 04 3.2668E+03 3.3340E+03 05 2.3929E+02 4.4491E+02 06 -2.5489E+02 1.1787E+03 07 1.9339E+02 7.9790E+02 08 5.6608E+02 -7.4877E+02 09 -6.0387E+01 2.2713E+00 10 -2.3061E+02 4.0185E+02 11 1.0094E+02 -1.6590E+02 12 -1.1025E+03 7.5069E+02 13 3.4054E+01 7.4764E+01 14 5.9236E+01 -8.3123E+01 15 4.3256E+01 -1.6989E+01 16 2.1079E+01 2.3242E+02 17 -5.8434E+01 -4.6383E+01 18 2.8474E+02 2.0977E+02 19 2.2286E+01 1.4474E+01 20 4.8045E+01 2.6307E+00 Flight 504, Condition E Edg.Bending @6.8%R, Flat.Bending @3.2%R, in-lb in-lb 2.3660E+03 MEAN 3.1267E+04 3.3329E+04 I/2PP 1.4438E+04 Nth COSINE SINE COSINE SINE 01 1.4982E+03 1.3314E+03 -1.4821E+04 2.4342E+04 02 -6.5498E+03 -4.0058E+02 2.5694E+03 6.1525E+02 03 2.1691E+03 -5.3018E+03 3.1715E+03 -8.8441E+02 04 2.0727E+03 -2.1903E+03 5.8887E+02 -1.8593E+02 05 3.2977E+02 -8.1400E+01 6.1094E+02 -1.4013E+03 06 -5.2576E+01 -8.3982E+02 -1.0805E+02 -3.8606E+02 07 -2.9210E+02 -5.1925E+02 -3.0442E+02 9.2586E+01 08 3.6899E+02 -3.7007E+02 9.2759E+01 4.4715E+01 09 -5.0273E+02 -2.1836E+02 7.7586E+02 -1.9978E+02 10 -2.8878E+01 -6.0793E+01 -6.6625E+02 9.6412E+02 11 1.0624E+02 2.6489E+02 3.4349E+01 1.1531E+03 12 -5.6782E+02 9.7695E+02 1.8977E+02 -3.7054E+02 13 -5.4047E+01 -3.3295E+02 1.3537E+01 -2.2236E+01 14 2.8359E+02 2.8496E+02 5.3108E+01 1.1877E+01 15 2.3595E+02 9.8727E+01 8.1791E+01 1.3165E+02 16 -3.5604E+01 -1.0829E+01 9.9869E+01 -7.0047E+01 17 -3.5838E+02 -6.4033E+02 2.6345E+02 2.0217E+02 18 2.7023E+02 1.4884E+01 1.0957E+02 -1.1047E+02 19 2.3420E+01 2.0128E+01 1.9028E+02 -5.3257E+01 20 -7.4927E+01 1.5563E+02 -7.1744E+01 4.3643E+01 Edg.Bending @14.2%R, Flat.Bending @14.2%R, in-lb in-lb 4.5907E+03 MEAN 2.1048E+04 1.6041E+04 I/2PP 4.9230E+03 Nth COSINE SINE COSINE SINE 01 1.0933E+03 1.4026E+02 -1.1034E+04 1.0915E+04 02 -1.5380E+03 8.6423E+02 7.1358E+02 7.3404E+02 03 1.7990E+02 -5.1725E+02 7.1001E+02 -1.2332E+03 04 3.7114E+01 -1.6957E+02 -1.0922E+02 -3.2544E+02 05 -2.6869E+02 -4.6928E+01 2.3963E+02 -2.9981E+02 06 -9.6227E+01 2.4447E+02 2.9470E+00 -1.6141E+02 07 1.0797E+02 6.5875E+02 -1.0490E+02 -6.4416E+01 08 -2.2955E+02 1.6741E+02 -4.7589E+01 8.0767E+01 09 1.8066E+02 8.6107E+01 1.1050E+02 -2.5534E+01 10 3.9988E+01 2.3274E+01 -9.5918E+01 1.0627E+02 11 8.2982E+01 -2.7735E+02 5.4885E+01 1.3613E+02 12 5.0937E+02 -6.4096E+02 1.9069E+02 -1.3729E+02 13 -2.1068E+01 1.3044E+02 -3.9871E+01 7.2272E+01 14 -2.2250E+02 -9.4494E+01 -1.8730E+01 1.2932E+01 15 -1.7776E+02 -1.0974E+02 -1.1577E+01 3.6590E+01 16 3.5345E+01 1.5302E+00 7.6682E+01 -3.4977E+01 17 3.8378E+02 6.5398E+02 -6.0685E+00 1.0777E+02 18 -3.1690E+02 4.2321E+01 -6.8072E+01 -1.5738E+01 19 -6.1023E+01 -3.9461E+01 1.0383E+01 -1.2058E+01 20 2.8332E+01 -9.7372E+01 8.8806E+00 -1.1482E+00 Flat.Bending @19.54%R, Edg.Bending @19.54%R, in-lb in-lb MEAN 1.9252E+04 1.5443E+03 I/2PP 3.8261E+03 1.2825E+04 Nth COSINE SINE COSINE SINE 01 -2.5975E+02 8.6227E+02 -7.2812E+03 9o3500E+03 9.3458E+02 2.6713E+02 02 -7.1873E+02 5.4253E+02 03 -4.1613E+02 6.6812E+02 4.9964E+01 -8.3591E+02 04 -6.3362E+02 3.2408E+02 -3.1857E+02 -7.1107E+02 05 -4.1081E+02 -4.9132E+01 6.8034E+01 1.0607E+02 06 -1.4327E+02 4.9095E+02 5.6648E+01 -9.4352E+01 07 1.9765E+02 6.7971E+02 -1.3396E+02 -2.4572E+02 08 -3.0373E+02 1.9733E+02 2.0554E+01 1.3557E+02 09 2.8716E+02 1.4241E+02 -3.1996E+02 6.8893E+01 10 6.4322E+01 -2.9398E+01 1.9306E+02 -3.1550E+02 11 -5.9909E+01 -3.1819E+02 -8.1371E+01 -3.3469E+02 12 3.0971E+02 -6.8300E+02 -3.0431E+00 7.3224E+01 13 3.5044E+01 2_3648E+02 4.3337E+01 2.4792E+01 14 -9.5692E+01 -2.3355E+00 -1.5101E+01 -1.7215E+01 15 -1.3347E+02 -4.8150E+01 -2.7813E+01 -4.3458E+01 16 1.3761E+01 -4.7783E+01 -2.9596E+01 -3.3293E+01 17 1.1784E+02 1.3175E+02 -1.2635E+02 -6.7264E+01 18 -5.8169E+01 2.2853E+00 -5.2013E+01 6.1694E+01 19 -1.7469E+01 1.0711E+01 -8.6198E+01 3.7500E+01 20 -3.2954E+01 -7.2557E+00 2.4367E+01 -3.0331E+01 Flat.Bending @31%R, Edg.Bending @31%R, in-lb in-lb MEAN 1.2962E+04 -3.4633E+03 1/2PP 3.2286E+03 1.2460E+04 Nth COSINE SINE COSINE SINE 01 -1.3611E+02 -1.1148E+02 -5.1221E+03 9.9349E+03 02 -6.1018E+02 1.3249E+02 1.2058E+03 2.1691E+01 03 -8.3071E+02 1.1866E+03 -6.2229E+02 -5.7173E+02 04 -8.1317E+02 4.3697E+02 -3.5955E+02 -1.2054E+03 05 -2.9579E+02 -2.9504E+01 -4.1206E+02 4.5775E+02 06 -9.9015E+01 3.2588E+02 4.5525E+01 1.5254E+02 07 1.9894E+02 1.1179E+02 3.4183E+01 5.3579E+00 08 -4.1387E+01 5.7238E+01 1.6590E+01 6.9015E+01 09 5.2464E+01 1.5545E+01 -4.6705E+02 9.0655E+01 10 3.2783E+01 -8.2238E+01 3.3788E+02 -4.3849E+02 11 -1.1924E+02 6.2822E+01 -1.1116E+02 -6.0221E+02 12 -3.9828E+02 2.3694E+02 -1.5382E+02 1.0121E+02 13 2.9818E+01 3.8052E+00 1.0608E+02 -7.8573E+01 14 1.6660E+02 1.0232E+02 -3.8981E+01 -5.8210E+01 15 1.2394E+02 9.3264E+01 -2°4069E+01 -1.2664E+02 16 -3.5300E+01 3.9945E+00 -1.2553E+02 7.5737E+01 17 -2.8479E+02 -5.2210E+02 2.1534E+02 7.7416E+01 18 2.5989E+02 -3.0512E+01 3.7896E+01 -1.5787E+01 19 4.5050E+01 2.8030E+01 2.4464E+01 -2.8210E+01 20 -1.3511E+01 6.7299E+01 -1.6139E+01 -3.6558E+01 jA Flat.Bending @48%R, Edg.Bending @48%R, in-lb in-lb -1.6240E+03 MEAN 4.9677E+03 9.8750E+03 1/2PP 3.2996E+03 Nth COSINE SINE COSINE SINE 01 -2.1655E+02 -1.5276E+03 -3.1277E+03 5.7439E+03 02 -1.2624E+03 1.0247E+02 1.0104E+03 -2.4329E+02 03 -6.8840E+02 1.0261E+03 -1.5079E+03 -9.7669E+01 04 -3.1049E+02 2.1904E+02 -9.3946E+01 -1.2016E+03 05 7.6256E+01 -2.1301E+01 -9.8363E+02 6.2587E+02 06 8.0373E+01 -1.6045E+02 -6.0961E+01 3.6677E+02 07 -7.6445E+01 -5.2145E+02 4.4415E+02 6.5708E+02 08 2.2164E+02 -2.2343E+02 2.2281E+01 -3.2468E+02 09 -1.5029E+02 -7.2999E+01 5.6254E+01 -2.7511E+01 10 -9.2772E+01 7.5566E+01 -5.3099E+01 1.0472E+02 11 4.8256E+01 1.0750E+02 4.4818E+01 2.7279E+01 12 2.5891E+01 2.4405E+02 -8.4199E+01 -6.8962E+01 13 3.2688E+00 -1.5008E+02 -1.2423E+01 -1.1493E+02 14 -2.2777E+01 -4.4380E+01 -4.9671E+01 -3.7888E+00 15 -2.9127E+01 -7.9117E+01 -3.7712E+00 -1.1530E+01 16 2.7474E+01 -1.0556E+01 -4.3474E+01 1.8415E+02 17 1.8927E+02 3.5557E+02 4.9394E+02 4.5726E+02 18 -1.8043E+02 2.8858E+01 8.9367E+01 -1.7196E+02 19 -2.6187E+01 -3.4090E+01 2.1430E+02 -6.4072E+01 20 1.5758E+01 -4.3263E+01 -7.7743E+01 1.1732E+01 Flat.Bending @64%R, Edg.Bending @64%R, in-lb in-lb MEAN -4.1758E+02 -I.1893E+03 I/2PP 3.7740E+03 6.4504E+03 Nth COSINE SINE COSINE SINE 01 -2.8292E+02 -1.3561E+03 -1.4335E+03 2.8233E+03 02 -2.1527E+03 1.7546E+02 7.3783E+02 -6.5606E+02 03 -2.2692E+02 7.1282E+02 -1.7084E+03 2.8505E+02 04 3.1426E+02 -2.5900E+02 2.3087E+02 -8.3226E+02 05 1.3969E+02 5.1983E+01 -8.8568E+02 4.2283E+02 06 7.1890E+01 -1.5638E+02 -1.2774E+02 3.3887E+02 07 -I.0163E+02 -8.9648E+01 5.4797E+02 8.8276E+02 08 -4.5880E+01 1.1967E+01 -5.9686E+01 -3.4886E+02 09 -8.6789E+00 1.7634E+01 5.8052E+02 -5.9249E+01 I0 7.8202E+01 3.9440E+01 -3.4411E+02 4.2338E+02 Ii 1.2338E+02 -I.I197E+02 6.0713E+01 4.5771E+02 12 3.3636E+02 -4.2759E+02 8.2398E+01 -2.9110E+02 13 -3.8886E+01 1.3545E+02 -9.6906E+01 1.2641E+02 14 -7.5607E+01 -3.6864E+01 -8.4707E+00 2.6655E+01 15 -3.2178E+01 5.4793E+01 -1.3439E+01 1.0274E+02 16 -7.5846E+00 3.6087E+01 6.9804E+01 -9.8252E+01 17 -6.5612E+01 -1.6117E+02 -1.8371E+02 -1.1525E+02 18 9.1580E+01 -1.4852E+01 -5.2085E+01 -4.7821E+00 19 1.7291E+01 2.8574E+01 -6.3377E+01 4.0400E+01 20 -7.3419E+00 3.6095E+01 7.0894E+00 8.4557E+00 Flat.Bending @81%R, Edg.Bending @81%R, in-lb in-lb MEAN -4.7160E+03 -5.1850E+03 1/2PP 3.8251E+03 3.4609E+03 Nth COSINE SINE COSINE SINE 01 -1.0598E+02 -4.7171E+02 -4.8301E+02 7.5002E+02 02 -2.5166E+03 2.9808E+02 3.1684E+02 -4.3719E+02 03 -2.0984E+02 2.4343E+02 -1.1134E+03 1.1358E+02 04 8.0140E+02 -5.9379E+02 3.9830E+02 -2.9619E+02 05 2.9658E+00 -1.4958E+02 -2.6650E+02 2.0612E+01 06 -1.7876E+02 1.0572E+02 -1.5740E+02 7.3136E+01 07 7.7882E+01 6.0958E+02 2.4610E+02 6.8707E+02 08 -9.8989E+01 1.5619E+02 -5.8459E+01 -1.5379E+02 09 1.0922E+02 9.5729E+00 5.5732E+02 1.2404E+01 10 -2.0372E+01 -I.0809E+02 -2.6306E+02 2.3129E+02 11 -1.3457E+02 6.0595E+01 -5.4749E+01 4.1737E+02 12 -2.8353E+02 2.8150E+02 -2.1491E+01 -5.7790E+01 13 2.5690E+01 -5.3610E+01 -2.1498E+01 1.9978E+02 14 8.9655E+01 4.9739E+01 1.2476E+02 3.6310E+01 15 2.5320E+01 -2.1290E+01 4.2131E+01 4.5894E+01 16 -2.3942E+01 -4.8321E+01 6.6825E+01 -2.7171E+02 17 3.8974E+01 5.3146E+01 -5.5103E+02 -4.0816E+02 18 -1.9544E+01 2.6407E+01 -1.2067E+02 1.7648E+02 19 -5.9661E+00 4.5612E+00 -2.2487E+02 1.1170E+02 20 -2.0414E+01 -2.5651E+01 7.6688E+01 -4.1412E+01 Collective Control Longitudinal Cyclic Load, Ib Load, ib MEAN -1.6461E+03 1.8762E+02 1/2PP 2.2963E+03 2.1235E+02 Nth COSINE SINE COSINE SINE 01 2.1375E+00 -5.3068E+01 2.9485E+00 1.3198E+01 02 -1.2524E+01 -1.7643E+01 2.2004E+00 4.5397E+00 03 -2.6389E+01 4.4288E+01 4.2974E+00 -1.1253E+01 04 -9.5742E+02 1.6150E+03 7.7828E+01 -1.3511E+02 05 6.7259E+01 -1.1438E+02 -1.2411E+01 6.8053E+00 06 1.8678E+01 5.7216E+01 -7.4152E+00 -6.2202E+00 07 7.4716E+01 -6.3007E+01 -8.6153E+00 8.7410E+00 08 9.1993E+01 5.0704E+01 1.0178E+01 1.2957E+01 09 -2.5417E+01 8.6801E+00 -4.5385E+00 -2.4280E+00 10 -4.0188E+00 4.2302E+00 3.9965E+00 -4.8704E-01 11 1.6040E+01 2.0323E+01 -5.4350E+00 -5.8227E+00 12 1.1338E+02 3.8410E+02 -1.9144E+01 -2.8999E+01 13 -1.6454E+00 -9.8054E+00 7.9386E-01 -1.9265E+00 14 1.4268E+00 2.1309E+01 -7.3165E-01 -1.5562E+00 15 5.2894E+00 -1.1623E+01 4.9933E-01 -4.4301E-01 16 7.1461E+01 -2.8427E+01 -4.9652E+00 -1.2225E+00 17 -5.5140E+00 4.9332E+00 1.6964E+00 6.8917E-01 18 2.8610E+00 9.3478E+00 -5.7318E-01 -6.6491E-01 19 -2.4423E+01 -7.6400E-01 4.2507E+00 -1.1439E+00 20 -4.2639E+01 8.1356E+01 1.0567E+01 -6.6477E+00 2OO Spider Arm Load, Lateral Cyclic Load, ib ib -8.4179E+01 MEAN -2.5333E+02 5.6383E+02 I/2PP 1.8728E+02 SINE Nth COSINE SINE COSINE 2.0832E+02 01 -6.9144E+00 2.4251E+00 1.6192E+02 3.3769E+00 02 9.2606E+00 -6.4461E+00 9.2351E+01 5.5123E+01 03 9.0582E-02 -1.0649E+00 -5.4569E+01 1.3302E+02 04 2.7146E+01 -1.3211E+02 -5.1471E+01 6.7239E+01 05 3.8027E+00 2.0512E+01 4.4139E+01 -9.8136E+00 06 7.3310E+00 -1.6051E+00 6.6235E+01 3.2364E+00 07 -5.0568E+00 -6.0824E-01 -2.4597E+01 1.3376E+01 08 -4.3389E+00 9.6018E+00 -5.2323E+00 3.1547E+00 09 6.0473E+00 -5.8916E+00 -1.4716E+00 4.2580E+00 10 -9.7376E-01 -6.0095E-01 1.1959E+01 5.2501E+00 11 7.2482E-01 -1.2235E+00 1.4530E+01 -2.9434E-02 12 -1.3981E+01 -3.4299E+01 5.2854E+00 -1.1261E+01 13 5.6838E+00 -1.4627E-01 -1.6112E+00 -4.1812E+01 14 -2.2201E-01 -6.6050E-02 -2.3130E+01 1.6289E+00 15 1.9628E+00 2.6062E+00 7.9528E+00 5.4432E+00 16 6.8959E+00 9.8876E+00 7.7524E-01 -6.4485E+00 17 -1.2796E+00 -5.7303E-02 -7.6314E+00 -9.8227E-01 18 1.2121E-01 -2.0584E+00 3.5501E+00 3.2348E+00 19 1.5410E-01 2.8985E+00 6.1742E+00 -9.8642E+00 20 -2.8481E+00 1.2799E+00 5.3432E+00 Lag Damper Load, Blade Feathering ib Angle, deg 4.9771E+02 MEAN 1.6517E+01 1.4053E+03 1/2PP 5.7697E+00 Nth COSINE SINE COSINE SINE 01 1.7981E+00 -5.0031E+00 5.0845E+02 1.3793E+03 02 6.9684E-01 4.8799E-01 1.7950E+02 -9.7354E+01 03 2.0460E-02 -4.2990E-02 1.1893E+02 1.1402E+02 04 -2.3712E-01 4.6423E-01 1.8769E+01 -4.9841E+01 05 1.6374E-01 5.4053E-02 4.1129E+00 -3.7304E+01 06 4.1007E-02 -4.8364E-02 -9.2705E+00 8.3826E+00 07 -7.2597E-02 -5.4151E-02 -3.9115E+01 -1.3780E+01 08 3.4570E-02 6.1963E-02 1.9773E+01 4.1915E+01 09 6.1884E-02 -6.3764E-03 -1.0835E+01 8.0864E+00 10 -4.2457E-02 1.1470E-01 8.3942E+00 3.7183E+00 11 4.3135E-02 1.2784E-01 -2.4000E+01 2.8960E+00 12 7.6084E-02 2.8700E-02 -7.2490E+00 -4.3225E+01 13 -2.5342E-02 -3.9871E-02 1.5542E+01 5.1589E+00 14 -6.9544E-03 -3.4623E-02 4.5245E+00 -2.6646E+00 15 1.8667E-05 -1.5809E-02 -8.0737E+00 -6.7919E-01 16 1.3096E-02 1.7913E-02 -5.2006E+00 -2.8000E+01 17 3.2421E-03 3.2200E-02 -1.1313E+01 -3.5509E-01 18 2.4606E-03 1.8299E-02 -5.1978E+00 1.8398E+01 19 1.1887E-04 -1.5090E-03 -1.7054E+01 1.0987E+01 20 -4.9782E-03 1.4106E-02 -1.9720E+00 1.2900E-01 MR Shaft Torque, in-lb 1.9170E+05 1/2PP 1.5190E+04 Nth COSINE SINE 01 5.5609E+02 -9.1939E+02 02 6.5726E+03 4.3939E+03 03 -7.0428E+01 5.4217E+02 04 6.3266E+03 2.8443E+03 05 1.3514E+02 2.4879E+02 06 4.0655E+02 1.8281E+03 07 2.3613E+01 5.0239E+02 08 -7.5762E+00 -1.6518E+03 09 -1.7402E+02 2.3080E+02 10 -1.9404E+02 8.0775E+02 11 -1.3971E+02 -8.4212E+01 12 -3.7782E+02 1.5722E+03 13 8.3390E+00 -1.2181E+02 14 4.6784E+01 6.0354E+01 15 8.6158E+01 -7.3829E+01 16 1.9618E+02 2.1822E+02 17 1.2263E+02 -1.5082E+02 18 2.3444E+02 2.3322E+01 19 -5.5742E+01 5.4795E+00 20 -7.6038E+01 -7.1399E+01 2O2

Appendix D Time-History Plots of Hub and Blade Parameters + m_ q | ! ! Ii | q q * : ! !

!i

i , \

/ /

C) , .,

!

il

ii

"l!

• i |

t-

J

t.

iii

.!

-t -i i

ii

! iiil Iii '

il

|

i| j

.1

t

i I |

÷

I

i

m_ m_ S

,.1o

! t e_ _uv _nooj

li

• .

2O9

,j

q

|

I

+

I

i!

i

,i

I

|

÷ +

i

N N

i

• ;i 'jj

g .| ,_i !

!!

l!

• ! >. " ,I- ' \_ i

o_

I

I

i

I

÷ W

\

Ii

-i

,',. !

i i

._|

g g 4-

:i_ il

"!

(.)÷

_E

i i i ' ' s i ' '

II

|

g ÷ +

i

i

:+

ill: i!_ii

!

!i

il

i f') I"1 p.) 0 0 "t- ÷ t og O+ | i

! !

!I

It

C

/

•: o ; :

i

|

,ii

r

!

,,; _ -, o _ , !| I o

g*) |

t

I0

II

t

\ .\

ri

I

-t"

!

,I \

Io

q

II " ,,_.li-___., ' !i i

22O

-i -i

.i |

• i i

8+

i

-lii

-!

.| ° , & o o I o ,:. : i

I i I {

s

ii !t

÷ L_

°i

i i ! { I i I t ! ! !

!I

q +

I

I

Q÷ Z_

8_

q

I°

it

I,'1 +

o No

!i

+

|

I

÷ _r

i

i

M

/

i o

- :, - ,; ;, ÷ '4- P"I 4- 8 + .i

gt

: I:l : !! i !

!t

÷ a+

z_

8_

li

.,I-

i

i

0°

i i : i

' * i ; I I i i : ! I I

l i *

I!

: : : - ? : : ; : : =, : ÷ W

i

i

wr

,!i!

I!

lJ

÷ Cn

i

i

0°

i!

!

!i

li

÷ + !

23!

|

i

I.

|

i

i

,i

÷ z'-_+ "Z r' i

|

4-

!

I

Io

i i i i i = ! ! i i

!; II

!I

|

d,.

"ij

,K |

It

÷ t-

Ii

ii

ii

i

I

| ! I _" q_"_ __ _ _8 : : : : : _ _ : - ;

!I

q I

|

÷ W .!

,|

ii

!i

;,q '4- W

Ii

|

4- ÷ ,g u_ q q wiiii:+! i i !,

1]

.i

-!

l!

+ ÷ o.

o q

!

lj

! i

l!

O0 + "k +

II

!!

+

Io

i o

il

II

|

1!

|

II li

4-

g_

(,,_

ri

+

Jii ii "i, _ ! t

Ii

+

I

÷

i

i

c_ W+ !.

I

.G

I 1 |

+

t,I'

i

i W+

t I • i !

i i

t!

: : - : - :. - : _,

|

0_

|

'4-

i

i

.!

L_

Ij

!i

|

25O !

]

i

I

÷ 4-

lii

!

w°_ | .| -II q: I o

i!l °

i i It

i i i: ! i !

i!

I!

i |

÷

!

u_

i

!1°

!

t: !

-2.52

• i

4- ,.$

"i'i !!' " i i : ! ! !

li

q-_. '(_£)'a'a uJwOG6L01%l _1_

|

'4-

i

I

]] ,=" I,,'3, + i

II

ii i _ i , ! I

I i

!

i

|

\

I

i i I i i : ,J I, ,l

!

_7 -I- r-...* i

II

2.58 ,¢i

I I I I : i

• ::i' _ii

!!

I ; q--. '(x_)_ "'_o'_,

|

i

i

ti

i

i

o Q .4- + O÷

x_

lj

i

_ • o ;, ° , I,'1 ÷ i

:iiii!

i i J i i

!!

I.

4- w

!

le, i

i

II , ?

i i i

i

i |

.#.

i_ !

i

iii il;!i!!!

! ! .<, .,>o., ,_<,oo _.,0,,,oo ,_

I

÷

I

iiii'!i

u_

II

\

I

i

i

i i ; ! i ! i i I"

i i i ' ! ! i i i

,

|

i

i

÷

io

i i l! '_"

|

'4"

i

i

|

o _

:1o

Io

ii_ !i

4- °11

ills: "

i "': iiii!

Ii

I i m_ _ :+_<_ _+_ + + =?

q l; q • .0 i ÷ I|t i: "° °

i!

|

/

|

t- + w --÷ | o

i i " "

i _ " , _ ! i

i i C_ ÷ q i i ÷ ° ° _ ;,

\

\

/

/ ÷ oo

II

g ÷ g 4-

!I

• • _w

iiii_'iJ!!!

+

_g

Ii

4- W IN =g _r

i "' 'ii:i i I | i : i !

" , m

i i i i i : i l !

! i ,_-_ '_)-_ ,_<,_-_ ,_ l!

.E

!

I

4-

i o

i

iI

i

i X II mg _+ | zw g I 2 & "

_.. !

Ii

÷ tl i i i i ' _ ,_, 4- -i- iii_ , iii,

II

f; [:

|

: °

|

÷ N Q

iiiii:!!!jji

_i _i i ! + ! i !

ti

4- ÷ m_ m?

I°

|

÷ W Io

I

m_

lj

E: ÷ ÷ o.

C_ n a_ 0,_ 8_ .° | | ! I | : i

i i ! _ i ! ! "''i' ii

i i

11 tl

/

l; 0_ + o

!1

I; 4" w ,.,o .| I.

li

|

4- 0 + q_ I °.

o _ : o o o :

I ._-_ . _ _ _ ,_ ! _

, 286

|

o Q 4-

• i

4- g

9_

8_

! ! _ i, | .

i':i' 'i!i

li

li

q-_. 'Og_;'6tY_'_ wu.c._o'_t_

/

i

i

+

i

r_

i

8'_

- j

, i!

|

+

i

0.

I.

II

29O

,/

_;i il

Z .| .; o ÷

|

I|

" : " i i

s : i t !

|

i

i

i

o o o

|

÷

i

i

L_.+ o

al

÷ +

I ! I i " i !, i

l!

_i_ _ ._

iiiii !!-ii

|

I

I,1 4" ill m.

,,;,.i o!

ll ii

I

E.

I.

!I

|

+

i

+l i

°°

+.!

ii

Ii

\ (3+

" j ! !

Jl

o o

i

i |

"i" Ill

[ii"

t

.I

I°

| i

! ! ! !

!i

|

+

i

i

l

_-_" _

_ _ _ _-_ _ : i -_ _ _ _ .... I °

.+. i -i

q

¢++_i

I:

|

! /

<_ | :I o Ii ° _ 'T ; m-_. ",(_"m,)'b"+ u,._60"mU _V',t ÷ | s

+I+

,lo

!!

i

+ +

I

II °.

i+

,..f_ 0 _ ÷ + .f* '8!

""_...._ ' . i -'2.

!! l i ,j I t i " i i i i

_-_._.,_o_' ' ' ! j

|

i

+ m6 <g , .... , o ° ::i i i i i t i : i ! !,

II

|

÷

i

!i

,j

i

-g \ \ 3O6

i

i

i | I _" q_ _r_ _-_-_ _ "t" + ÷ 3O9

|

'4-

lI

I'

!1 °

o

|

i

i

u_ I.

!i

|

?

|

i

i: o

|

4-

,,,o_

*

! _iii i-'i i!

i

i

I i

|

i

i

q I; I.

|

p,) "I- ,4

I

g

i;;:iii!j

!i

!i

I

÷

.[

i |

4-

_iil

l[

° * • " I

i i i i i ; : i i

:: I °

i

o

,i

+ i, , -, , & ..'

|

:i_i!

J_

w') ,4-

li

' ' ti

÷ LdkJ

I°

?

|

i

.i

+

i

|

=1o

° ii i

i '! i,l i

li

* + ÷ W ur) oo i

!!

I°

f!

v') o |J ,_"

li

\

|

q-

Ii

|

"4" hl

I

,,,.,j

+.+

++

+++

|] .0"

i

÷

|

÷ q-_. '_wg)_ "'_.6o_'em

I°

i._ i i _ :iii i i

÷ +

o

|

II

|

:Jo

÷ W

iiJJ, _i!!i

Ej

+ °o i

Ii

|

O ÷

I I |

÷ 1,4

=g

I

+

÷

i <>

i!

i

_.,_

: o _

_ t ! i " ! i !

o

'i i

g ÷

It

÷

!!

|

+ +

I

.° <_

I|

I°

|

CI +

i

I

II

lj

"i" | |

Ii

|

i

-i

.| g I, o o_ -I

!

i _'' " i" !

II

i i

|

÷ I!

s!

+ i_ iii : _! j !i,

-2

÷ .T

i

!i i i i _i , ii Jl

'4- I sl _'"

|

i

i

-!

i+I

| : o o o ' -' B -l-

g

.; °!

e_

J

|

i

I

|

÷

i

t_

i

.I

,1°

| I. s _, s I_ ;

Ii

q -'?.._,_ _,.. ..__ / _, T_ /.

d..

Lri

S , _ii

r,,1 _g _g _.-._. ,,_ _.-,-._, i"= ,q °,=,.T °_ .... !_'_C',, _.----._/ I I, I ! 1 ! 1 " i I ! ! J

i i t : J l! |

i i" "'i!

l!

!

=i

,i

I

+

li

d- !

o

i

|

i ]

i

i

i

i

i

I0 +

I

i

¢.i ,.

u_

+++

!i

|

+

I

II

% ÷ n

Jl

o ÷ °.

!

I

÷

i

i

i I

I i

i

,io

i W ÷ .I

Ji

I

|

!

I.

+ B W +

i

I

,o |

ii ii i: i-_ _

i ii

II

s_

i

, |

:., : +

:i i!

i j

,.,o_

II

|

|

I

-i

i

÷ w |

L

i: jo

:s!!i

i _" _ _ _ i

i

li

$oj 'a)OuJo 0 6ol !_ j ÷

J

If ,

fo

!

.!

J_

N S

It

k

t o ÷ ' 366 Form Approved

REPORT DOCUMENTATION PAGE OMBNo. 0704-0188

Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing date sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other asPect of this collection of information, includingsuggestions for reducing this burden, to Washington Headquarters Services, Directorate for information Operations and Reports. 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management end Budget. Paperwork Reduction Project (0704-0188), Washington. DC 20503.

1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE 3. REPORT TYPE AND DATES COVERED May 1993 Technical Memorandum i4. TITLE AND SUBIII_.E 5. FUNDING NUMBERS Performance and Rotor Loads Measurements of the Lynx XZ170 Helicopter with Rectangular Blades 505-59-36 6. AUTHOR(S) Benton H. Lau, Alexander W. Louie, Nicholas Griffiths, and Costantinos P. Sotiriou 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER Ames Research Center Moffett Field, CA 94035-1000 A-93039 8. SPONSORING/MONITORING AGENCY NAME(S) ANDAOORESS(ES) 10. SPONSORINGIMONEORING AGENCY REPORT NUMBER National Aeronautics and Space Administration NASA TM-104000 Washington, DC 20546-0001 11. SUPPLEMENTARY NOTES Point of Contact: Benton H. Lau, Ames Research Center, MS T042, Moffett Field, CA 94035-1000 (415) 604-6714 12a. DISTRIBUTION/AVAILABILITY STATEMENT 12b. DISTRIBUTION CODE Unclassified-Unlimited Subject Category - 01 13. ABSTRACT (Maximum 200 words) This report presents the results of a series of flight tests on the Lynx XZIT0 helicopter with rect- angular blades. The test objectives were to explore the flight envelope and to measure the performance and structural loads of the Lynx main-rotor system. The tests were conducted as part of the British Experimental Rotor Programme (BERP) under a contract with the Ministry of Defense in England. Data were acquired for steady-level flights at five weight coefficients. Some flight conditions were tested at beyond the retreating-blade stall boundary, which was defined by a predetermined limit on the pitch- link vibratory load. In addition to documenting the flight conditions and data, this report describes the aircraft, particularly the rotor system, in detail.

14. SUBJECT TI=NM8 18. NUMBER OF PAGES Performance, Rotor load, Lynx helicopter 16. PRICE CODE A16 17. SECURITY CLASSIFICATION 18. SECURITY CLASSIFICATION 19. SECURITY CLASSIFICATION 20. LIMITATION OF ABSTRAC1 OF REPORT OF THIS PAGE OF ABSTRACT Unclassified Unclassified NSN 7540-01-280-5500 Standard Form 298 (Rev. 2-89) Prescribed by ANSI Std. Z39-18