Beechcraft 35 Bonanza manuals

This document is an Airworthiness Directive (AD) for the Beechcraft 35 Bonanza series aeroplanes, issued by the Civil Aviation Safety Authority of Australia. It mandates specific inspections and maintenance actions to ensure the safety and airworthiness of the aircraft. The directive focuses on the inspection and replacement of wing attachment hardware, including bolts, nuts, and fittings, to prevent unsafe conditions due to corrosion or other failures. The AD outlines compliance timelines and requirements for both private and commercial operations, emphasizing the importance of adhering to the specified maintenance manual for detailed procedures. It is crucial for operators and maintenance personnel to follow these guidelines to maintain the aircraft's airworthiness and safety standards.

• Inspect wing attach fittings for corrosion every 12 months.
• Remove and inspect wing bolts, washers, and nuts as per the maintenance manual.
• For private operations, inspect wing bolts within 10 years of installation or 100 hours TIS/12 months from AD commencement.
• Replace wing hardware before 20 years TIS after installation of new bolts.
• Report all inspection findings to CASA.