CESSNA 185 — Airworthiness Directives

This document is an Airworthiness Directive (AD) issued by the Civil Aviation Safety Authority (CASA) of Australia, specifically addressing safety concerns related to the Cessna 185 series aircraft, including the A185F model. The directive outlines necessary inspections and potential replacements of fuel strainer assemblies that may have been improperly manufactured. It is crucial for maintaining the airworthiness of affected aircraft and ensuring pilot safety. The AD mandates compliance within specified timeframes to mitigate risks associated with fuel system failures that could lead to engine power loss or stoppage during flight.

• Affected models include Cessna 185D, 185E, A185E, and A185F.
• Inspect fuel strainer assembly for part numbers shipped between December 12, 1996, and September 5, 1997.
• Measure the standpipe tube length; it must not exceed 1.68 inches.
• Replace the filter strainer top assembly if the standpipe exceeds the specified length.
• Compliance is required within 12 months of the directive's effective date.