CESSNA 210D — Service Bulletins
1 service bulletins reference for the CESSNA 210D.
Overview
Service Bulletin - Nose Landing Gear Actuator Downlock Pin Inspection · 1995
This service bulletin outlines the inspection procedures for the nose landing gear actuator downlock pins on various Cessna aircraft models, including the Cessna 210 series. It addresses potential issues with pin cracking and provides compliance recommendations to ensure safety.
- Inspection of downlock pins is crucial to prevent gear failure.
- Initial inspection should occur within 200 hours or 12 months.
- Repetitive inspections are required at each gear retraction check.
- Installation of SK210-155 eliminates the need for repetitive inspections.
- FAA and DGAC approvals are obtained for the technical data.
- Approximately 1.0 man-hour is needed for inspection.
- Replacement actuator pins are available for $298.00 each.
- Failure to comply may result in gear collapse.
1 document
CESSNA 210D — Service Bulletins FAQ
How many Service Bulletins documents does Sprinkle have for the CESSNA 210D?
Sprinkle has 1 Service Bulletins document on file for the CESSNA 210D.
What year is the CESSNA 210D Service Bulletins?
The CESSNA 210D Service Bulletins on file is dated 1995.
Where does Sprinkle's CESSNA 210D Service Bulletins come from?
This CESSNA 210D Service Bulletins was originally published by mcfarlaneaviation.com and is hosted on Sprinkle with full text and specs.