Specifications for the CESSNA 172S Skyhawk
CESSNA 172S Skyhawk · Specifications
Overview
This document provides detailed specifications for the Cessna 172S Skyhawk, a popular single-engine aircraft known for its reliability and performance. It serves as a reference for pilots and aviation enthusiasts, offering insights into the aircraft's dimensions, weight, performance metrics, and operational capabilities. The specifications outlined in this document are crucial for flight planning, maintenance, and understanding the aircraft's operational limits. Key information includes performance data such as takeoff and landing distances, fuel capacity, and weight limits, which are essential for safe and efficient flying.
- Wingspan: 36 ft 1 in
- Maximum Takeoff Weight: 2,550 lbs
- Cruise Speed: 122 knots
- Range: 640 nautical miles
- Stalling Speed (landing configuration): 47 knots
Document
Source
Originally published by www.motorolasolutions.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Specifications
- Year
- 2025
- Pages
- 12
- File size
- 6.5 MB
- Publisher
- www.motorolasolutions.com
Specifications & performance
Extracted from this document.
Specifications
- Range (nm)
- 640
- Engine (hp)
- 180
- Height (ft)
- 8.92
- Length (ft)
- 27.17
- Propeller
- McCauley 1A170/DM
- Wingspan (ft)
- 36.08
- Engine model
- Lycoming IO-360-L2A
- Empty weight (lb)
- 1,600
- Fuel capacity (gal)
- 56
- Rate of climb (fpm)
- 730
- Service ceiling (ft)
- 14,000
- Max takeoff weight (lb)
- 2,550
Performance
- Fuel burn (gph)
- 10
- Landing over 50ft
- 1,500
- Takeoff over 50ft
- 2,000
- Landing distance (ft)
- 1,200
- Takeoff distance (ft)
- 1,500
Weight & balance
- Cg range (in)
- 36
- Useful load (lb)
- 950
- Max ramp weight (lb)
- 2,550
- Baggage allowance (lb)
- 200
- Basic empty weight (lb)
- 1,600
- Max landing weight (lb)
- 2,450
- Max takeoff weight (lb)
- 2,550
Common. Rarer than 2% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the CESSNA 172S Skyhawk.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
Free — save the CESSNA 172S Skyhawk to your watchlist and track it in one place.
More CESSNA 172S Skyhawkmanuals & documents
See all 49 →- S32K3xx Data SheetSpecifications
- EFR32MG29 Wireless SoC Family Data SheetSpecifications
- List of EASA Supplemental Type CertificatesSupplemental Type Certificate
- SkyView Autopilot Servo Installation & Maintenance ManualAvionics Manual
- Cessna 172 Roll Servo Cable Guard, Rev BService Bulletins
- Supplemental Type CertificateSupplemental Type Certificate
- CHECKLISTSChecklist
- ELECTRICAL POWER - ALTERNATOR CONTROL UNIT (ACU) AND CONNECTOR OBSOLESCENCEService Bulletins
- Cessna 172-S Training SupplementTraining Manual
- CAP TXWG Cessna 172S IntroductionOther Documents
- Cessna 172 Aircraft ExamSupplemental Type Certificate
- Weight and BalanceWeight And Balance
If you fly the CESSNA 172S Skyhawk, you may also be researching these.
In this document
Aircraft Specifications
The Cessna 172S Skyhawk features a wingspan of 36 feet 1 inch, a length of 27 feet 2 inches, and a height of 8 feet 11 inches. The aircraft has an empty weight of 1,600 lbs and a maximum takeoff weight of 2,550 lbs. It has a fuel capacity of 56 gallons, allowing for extended flight durations.
Performance Data
The Cessna 172S has a maximum speed of 124 knots and a cruise speed of 122 knots. The aircraft has a range of approximately 640 nautical miles and a service ceiling of 14,000 feet. The rate of climb is 730 feet per minute.
Weight and Balance
The basic empty weight of the Cessna 172S is 1,600 lbs, with a maximum ramp weight of 2,550 lbs and a maximum landing weight of 2,450 lbs. The useful load is 950 lbs, and the baggage allowance is 200 lbs.
V-Speeds
Key V-speeds for the Cessna 172S include: VSO (stalling speed in landing configuration) at 47 knots, VS1 (stalling speed in clean configuration) at 50 knots, VR (rotation speed) at 55 knots, VY (best rate of climb speed) at 74 knots, and VNE (never exceed speed) at 163 knots.
Safety notes
- Ensure weight and balance calculations are completed before flight.
- Adhere to V-speed limits to maintain safe flight operations.
Full document text
MXM600 Frontline safety, today and tomorrow The MXM600 takes on the challenges of the front line, keeping your teams safe while they deal with the safety of others. It has been designed to provide reliable in-vehicle TETRA coverage for voice and data communications, as well as extend the coverage of TETRA portable radios via its gateway and repeater capability. Clarity of voice communication is critical in order to get vital messages across. Noise suppression technology, trained through Artificial Intelligence (AI) machine-learning, is integrated in the MXM600 to suppress background noise and improve clarity of calls — so users can hear and be heard, even in noisy conditions. Data Sheet We designed the MXM600 to be easy to install and automated some of the configuration work needed when setting up a mobile radio. The MXM600 is highly flexible when it comes to installation options: it can support two control heads from one transceiver, and also has the ability to control two transceivers from one control head. Whether you are looking to install the radio in a car, fire engine, van, ambulance, train, boat or on a motorcycle — there are installation options for you. The MXM600 is a mobile radio that gives your frontline users the confidence to support their community. Ready to respond to sudden changes in the field and future changes in technology, it helps equip your front line to efficiently and effectively get the job done. Key attributes • Works with DIMETRA™ Connect to help stay connected outside of TETRA coverage • Loud and clear audio with AI-trained noise suppression technology • Supports GPS, Beidou, Galileo and GLONASS • Bluetooth® 5.3 with up to 90 m range • Wideband 350 - 470 MHz or 806 - 870 MHz • Wi-Fi 2.4 GHz and 5 GHz • Automatic control head detection • Automatic control head software updates • Wi-Fi Over-The-Air Programming and firmware updates • Compatible with all MTM5000 audio accessories and control heads • Variety of transceiver models to support different needs • Choice of 4 remote control heads • Deeper radio interaction via M-Radio Control app on a Bluetooth-paired Android smartphone or tablet 2 Dimensions (H, D, W) and weight 186 mm 194 mm 192 mm 200 mm 172 mm 172 mm 172 mm 188 mm 45 mm 45 mm 45 mm 60 mm Single Remote (transceiver and expansion head): 45 x 172 x 186 mm, 1355 g Databox (transceiver and expansion head): 45 x 172 x 192 mm, 1450 g Dash/desk mount (transceiver and expansion head): 60 x 188 x 200 mm, 1530 g Dual Remote (transceiver and expansion head): 45 x 172 x 194 mm, 1415 g General specifications Dash/desk mount transciever: 45 x 172 x 167 mm Dash/desk mount control head: 60 x 188 x 31 mm 3 Telephone style control head (TSCH): 220 x 65 x 75 mm, 450 g 188 mm 188 mm 200 mm 60 mm 60 mm 75 mm IP54 Remote Ethernet control head (RECH): 60 x 188 x 39 mm, 332 g IP67 Remote Ethernet control head (RECH): 60 x 188 x 39 mm, 338 g M6 dock: 79 x 51 x 73 mm, 85g M6 accessory hub (excluding cable): 110 x 29 x 82 mm, 165 g 82 mm 110 mm 79 mm 73 mm 51 mm 29 mm M6 handheld control head (excluding cable): 143 x 27 x 64 mm, 195 g 143 mm 64 mm 27 mm M6 handheld control head in dock (excluding cable): 151 x 51 x 73 mm, 288 g 151 mm 73 mm 51 mm 4 GENERAL SPECIFICIATIONS ELECTRICAL Electrical voltage range 10.8 to 15.6 V DC Electrical current consumption • At 10 W: Idle 0.5 A, Rx1 1.1 A, Tx 1.1 A Peak consumption is 3.5 A for Tx 1.1A for Rx with 15.6 W loudspeaker • At 3 W: Idle 0.5 A, Rx1 1.1 A, Tx 0.75 A Peak consumption is 1.45 A for Rx1 • Tx-Multi Slot PD (6 slots) at 10 W: 2.4 A (3.6 A peak) • Dash/desk control head adds 0.16 A • IP67 or IP54 RECH adds 0.3 A • M6 adds 0.2 A • M6 adds 0.4 A for Rx with integrated loudspeaker (0.9 A peak) • M6 adds 1.8 A for Rx with 15.6 W external loudspeaker (1.9 A peak) • M6 adds 2 A for Rx with both integrated loudspeaker and 15.6 W external speaker (2.4 A peak) • TSCH adds 0.3 A • USB host adds 0.25 A • Wi-Fi adds 0.13 A • Bluetooth adds 0.04 A AUDIO Audio output power at maximum volume External loudspeakers: 7.5 W / 13 W / 15.6 W (depending on external loudspeaker selected) Integrated loudspeaker: 2.2 W (M6 only) Built-in 2.2 W loudspeaker, maximum loudness M6 only • 102 phon (standard profile) • 105 phon (loud profile) Noise suppression AI-trained noise suppression (high and low suppression options) Acoustic feedback (howling) suppression AI-trained noise suppression also suppresses acoustic feedback (howling) Echo cancelling AI-trained noise suppression also provides echo cancelling capability 1 Based on 15.6W external loudspeaker 5 GNSS antenna connector 26-pin accessory connector TETRA antenna connector Power connector TETRA transceiver Single remote Dual remote Databox Dash/desk mount Bluetooth / Wi-Fi antenna connector QR code for ‘get started’ web page Slot for TETRA SIM card Trunnion mounting point Status LED RJ50 control head connector Ethernet / SIM port RS232 port RJ50 control head connectors RJ50 control head connector Emergency button GCAI MMP connector Status LED 25SubD connector RS232 port 6 TETRA SERVICES RF Frequency bands 350 - 470 MHz or 806 - 870 MHz Transmitter RF power 10 W (class 2) and 3 W (class 3) Adaptive RF power control Yes: starting at 15 dBm; finishing at 40 dBm Receiver class A and B Receiver static sensitivity (ETSI 300-392-2) 350 - 470 MHz: -116 dBm minimum, - 118 dBm typical 806 - 870 MHz: -114 dBm minimum, -116 dBm typical Receiver dynamic sensitivity (ETSI 300-392-2) 350 - 470 MHz: -107 dBm minimum, -109 dBm typical 806 - 870 MHz: -105 dBm minimum, -107 dBm typical VOICE Full duplex TMO: private, PABX, PSTN, MS-ISDN, emergency Half duplex • TMO: private, group, emergency • DMO: private, group, emergency Emergency call (user customisable) • Tactical: emergency group call to attached talkgroup • Non-tactical: emergency group call to dedicated talkgroup • Individual: emergency call to pre-defined party (half/full duplex) • Hot mic: configurable timers for automatic open mic
Show full textShow less
(talk without PTT) • Smart emergency: TMO to DMO and DMO to TMO automatic switching options • Location: location (GNSS) is sent with emergency • Target address: sent to individual or group address (selected or dedicated) • Alarm (status message): Emergency Status (or other predefined status) DGNA Up to 10,000 groups Other voice functions • Phonebook: 1000 persons, 6 numbers per each, 2000 maximum entry • Scanning: 40 lists of 20 talkgroups, monitoring 20 groups at the same time (selected talkgroup and passive monitoring) • Announcement talkgroup: 1 primary talkgroup that can monitor other talkgroups DATA Short Data • Status: ○ 400 entries, send via One-Touch Button (OTB) or via menu ○ TMO and DMO • SDS: ○ Concatenation up to 1000 characters ○ TMO and DMO • Call out (simple, full, E2EE) • Target address: Sent to individual or group address (selected or dedicated) • SDS messages can be sent and received during a voice call Packet Data Multi-slot Packet Data: data transmission with up to 4 slots supporting up to 28.8 kbit/s in total PEI (Peripheral Equipment Interface) • TNP1: Simultaneous operation of Packet Data and Short Data Services over a common Peripheral Equipment Interface (PEI) • AT Commands: full set of ETSI and Enhanced AT Commands • AT multiplexer: 4 virtual physical port (simultaneous PD, SDS, AT Commands and Air Tracer Sessions) WAP WAP 1.2.x and WAP 2.0 compatibility for UDP/IP stack 7 TETRA SERVICES (CONTINUED) SECURITY Air Interface Encryption Authentication Infrastructure initiated and made mutual by terminal Air Interface Encryption algorithm options • TEA1 • TEA2 • TEA3 (Hardware ready for TEA5, TEA6, TEA7 and dual encryption) Air Interface Encryption Protocols - security classes • Class 1 (Clear) • Class 2 (SCK) • Class 3 (DCK/CCK, OTAR-CCK, OTAR-SCK) • Class 3G (GCK, OTAR-GCK) End-to-End Encryption (E2EE) options • AES128 or AES256 for voice and short data with OTAK supported through an optional Hardware Security Module (HSM) • Encrypted SDS messaging to the Short Data Router (SDR) via the Short Data Encryption Gateway (SDEG) • Internal TETRA SIM card: via integrated card slot • External SIM card reader connected through a rear accessory connector or a Dual Remote Transciever’s RJ50 SIM port Wi-Fi security Built-in firewall: • Secures inbound IP traffic, by restricting it to the channel initiated by MXM600. • No open TCP/UDP sockets User access control • PIN/PUK code access • Radio User Assignment (RUA) / Radio User Identity (RUI) authentication restricts radio users to pre-installed service profile capabilities. • Setup for forwarding of calls and SDS from permanent radio to the currently assigned radio. • Users can be reached (called, sent SDS) at their permanent radio number (P-ISSI) even if they are logged on to a different radio. • RUA/RUI are not supported when E2EE is enabled. Other security features • Temporary disable (stun) • Permanent disable (either ETSI standard or customer restorable) • Packet data user authentication DMO / TMO GATEWAY SERVICES DMO / TMO gateway mode • Group voice calls from DMO to TMO • Group voice calls from TMO to DMO • Emergency group call from DMO to TMO • Emergency group call from TMO to DMO • Call pre-emption (in either direction) • SDS messaging through the gateway from DMO to TMO or TMO to DMO • Configurable routing of SDS messages to console or PEI • Point to point calls and SDS messages whilst operating as a gateway DMO REPEATER SERVICES DMO repeater mode • Repeats DMO voice calls on selected talkgroup • Repeats SDS and Status messaging on selected talkgroup • ETSI type 1A DMO repeater for channel efficient operation • Transmission of Repeater Presence Signal • Priority call, Emergency call (Preemptive Priority call) • End-to-End Encryption (E2EE) DMO traffic • Monitoring of and participation in calls whilst in Repeater mode • Configurable repeater power levels CONNECTIVITY WI-FI IEEE standards supported 802.11 a, b, g, n, ac Wi-Fi bands 2.4 GHz and 5 GHz Authentication and encryption • WPA • WPA2 • WPA2 Enterprise (EAP-TLS) • WPA 3 • WPA 3 Enterprise Security TLS 1.2 (OTAP application) BLUETOOTH Bluetooth® versions supported Bluetooth 5.3, 5.2, 5.1, 5.0, 4.2, 4.1, 4.0, and 2.1 + EDR Bluetooth range Bluetooth power: Class 1 Line of sight range is up to 90 m (accessory dependent) Bluetooth security • With Secure Connections (used in security mode 4, level 4 as recommended by NIST2) • Supports Advanced Encryption Standard (AES) algorithm, with 128 bit key length • Also uses an algorithm for Bluetooth key generation and key authentication Bluetooth audio profiles • Headset Profile (HSP) • Serial Port Profile (SPP) • Generic Access Profile (GAP) • Generic Attributes Profile (GATT) OTHER NFC (M6 only) Hardware ready. ISO/IEC 15693 2 https://csrc.nist.gov/publications/detail/sp/800-121/rev-2/final 8 LOCATION SERVICES SATELLITE / OUTDOOR NAVIGATION SERVICE Constellations supported • GPS plus one of: Galileo, GLONASS, and BDS (BeiDou) • Satellite-Based Augmentation Systems (SBAS) including QZSS Antenna External antenna, supports active antenna (5 V, 25 mA supply) Simultaneous satellites 12 GNSS acquisition sensitivity GPS: -145 dBm (guaranteed); -146 dBm (typical) GNSS tracking sensitivity GPS: BDS (BeiDou): GLONASS: Galileo: -163 dBm (guaranteed); -155 dBm (guaranteed); -157 dBm (guaranteed); -155 dBm (guaranteed); -164 dBm (typical) -156 dBm (typical) -160 dBm (typical) -157 dBm (typical) Horizontal accuracy, 2D 1.0 m (95% probable, -130 dBm, >15 SVs Galileo and GPS) Accuracy, 3D N/A Protocols • ETSI LIP (Short and Long) • Motorola Solutions LRRP TTFF cold start <50 sec (95% probable at -130 dBm) TTFF hot start <10 sec (95% probable at -130 dBm) 3 For more information about DIMETRA Connect, visit: motorolasolutions.com/dimetraconnect CONNECTORS AND PORTS Common across the back of all models of transceiver • 26-pin connector • Power connector • GNSS antenna connector • Combined Bluetooth and Wi-Fi antenna connector • TETRA antenna connector • TETRA SIM card slot Single remote model 1 x RJ50 control head connector Dual remote model • 2 x RJ50 control head connector • RJ50 External SIM / RJ45 Ethernet connector • RS232 (9-pin SubD) Databox model • 1x RJ50 control head connector • RS232 (9-pin SubD) • 25-pin SubD front connector Dash/desk mount model GCAI MMP IP54 RECH and IP67 RECH • 25-pin SubD rear connector • GCAI MMP TSCH • 10-pin accessory connector • Micro USB port M6 handheld control head • On M6 accessory hub: 10-pin accessory connector • USB-C port CONNECTORS AND PORTS FUNCTIONALITY RS232 Enables PC applications to run simultaneously: packet data, AT commands and SDS GCAI MMP Motorola Solutions rugged accessory connector for connection of accessories and programming USB via 26-pin connector accessory • USB 2.0 supports rapid programming and Peripheral Equipment Interface (PEI) (that enables PC applications to run simultaneously: packet data, AT commands and SDS) • USB On-The-Go (host and secondary) capability for PEI applications • USB 1.1 support (host mode) to manage USB secondary devices (e.g. SIM card reader) General Purpose Input / Output (GPIO) General Purpose Input / Output (GPIO): • 4 digital GPIOs (2 on rear 25-pin connector of IP54 RECH & IP67 RECH, 2 on rear 26-pin connector of transceiver) • 1 analog I/O (4 levels on rear 25-pin connector of IP54 RECH and IP67 RECH) GPIO • 4 digital GPIOs (2 on rear 25-pin connector of IP54 RECH and IP67 RECH, 2 on rear 26-pin connector of transceiver) • 1 analogue GPIO (4 levels on rear 25-pin connector of IP54 RECH and IP67 RECH) DIMETRA™ CONNECT (TETRA OVER IP) Supported networks Supports DIMETRA Connect 3 over Wi-Fi DIMETRA Connect security • Certificate based authentication between radio and DIMETRA Connect gateway • 256-bit AES encryption over IP between radio and DIMETRA Connect gateway • Maintains TETRA authentication, TETRA end-to- end encryption, TETRA temporary/permanent disable over Wi-Fi • TLS 1.3 for DIMETRA Connect over Wi-Fi 9 Display • Screen size: ○ Dash/desk control head, IP54 RECH, IP67 RECH: 2.8” (57.6 x 43.2 mm), VGA - 640 x 480 pixel, 65K colours ○ TSCH: 2.0’’ (30.6 x 40.8 mm) TFT colour transflective display, 240 x 320, 65K colours ○ M6 handheld control head: 2.4” (36.1 x 48.2 mm) TFT colour transflective display, 240 x 320, 65K colours • Variable backlight, user configurable • Font size: ○ IP54 RECH and IP67 RECH: standard and zoom mode (90 pixels, 4.5 mm high) characters ○ TSCH: standard and zoom mode (38 pixels, 3.5 mm high) characters ○ M6 handheld control head: standard and zoom mode (47 pixels, 4.2 mm high) characters • Multiple display languages, user selectable • Time display • Configurable screen saver: GIF image / text • M6 handheld control head and TSCH have rotating displays: ○ When off-hook: portrait orientation ○ When on-hook: fixed portrait, clockwise rotation, counter clockwise rotation Night Vision Goggle (NVG) mode (M6 only) Hardware ready. Turn on to set the display luminance for use with night vision goggles. LEDs will be turned off when in NVG mode Status LED Tri-colour status LED on control heads and transceiver Tones Configurable notification tones Controls • 4-way navigation key, menu and soft keys • Emergency button • User configurable shortcuts to menus and common features using “One-Touch-Button” (OTB) feature • IP54 RECH, IP67 RECH, TSCH: Rotary, talkgroup (when pressed) and volume change dual function with lock option • M6: Toggle switch, talkgroup or volume change single function Keypad • International keypad options4 • Back-lit character keypad with keypad lock option • TSCH, IP67 RECH and IP54 RECH: 3 programmable function keys: • M6 handheld control head: 5 programmable function keys • 12 programmable alphanumeric keys Text entry Predictive keypad text entry Menu • Customisable menu • Menu shortcuts Talkgroup management User friendly, flexible, fast and efficient interface Talkgroups • Dual layer folder structure (folder/subfolder) • TMO folders: up to 500, TMO talkgroups: up to 10000 • DMO folders: up to 128, DMO talkgroups: up to 2000 • 4000 TMO entries (up to 2048 entries in one folder) Favourite talkgroup folders Up to 3 folders (128 groups each, 384 groups in total) USER INTERFACES Scan lists 40 lists of up to 20 groups Country/Network code list 100 Contacts management Rapid search to find the contact easily Contacts • Up to 1000 contacts • Up to 6 numbers per contact, maximum of 2000 numbers in total Dialling methods One-Touch Buttons (OTB), from the favourite folders, from the address book, from the recent calls list, direct dialling, from the embedded numbers in Short Data Service messages, speed dialling, talkgroup dialling by index Call alert Short alert tone (configurable) for group incoming calls Message manager Distinct folders for each message type for flexible message management Text message list • SDS: Up to 200 entries (short messages) • At least 20 Entries for Outbox (long messages - up to 1000 characters) • At least 10 Entries for Inbox (long messages - up to 1000 characters) • Concatenation up to 1000 characters • TMO and DMO Status list 400 predefined messages assignable to One-Touch Buttons (OTB) Covert mode Yes Dual control head Any combination of 2 control heads (same or mix): IP54 RECH, IP67 RECH, TSCH, M6 Both displays are active with the following configurations: • 2 x IP54 RECH • 2 x IP67 RECH • 2 x TSCH • 2 x M6 • 1 x IP54 RECH and 1 x IP67 RECH Single display is active with either of these configurations: • IP54 RECH and TSCH • IP67 RECH and TSCH • IP54 RECH and M6 • IP67 RECH and M6 • M6 and TSCH Multi radio control • Single IP54 RECH or IP67 ReCH or TSCH or M6 can control 2 transceivers • Display to follow PTT OEM Control Head • Third party developed control head solution (physical or virtual) with the MXM600 transceiver • Motorola Solutions Remote Display Control (RDC) protocol is used for the solution (through Application Developer Program) • Optional use with IP54 RECH or IP67 RECH or TSCH or M6 in the dual control head configuration Automated control head detection5 Yes Auto control head software update5 Yes 4 For the availability of specific language keypads please contact your local Motorola Solutions representative. 5 Requires both the transceiver and control head to have at least MR2024.1. (At least MR2026.1 when using with M6) 10 ENVIRONMENTAL SPECIFICATIONS Operating temperature6 -30 to +70 °C Storage temperature -40 to +85 °C Humidity (condensation and high), temperature change, low and high temperature ETSI 300 019-1-5 class 5.2 Shock (bumps and shock), drop (free fall, drop and topple) and vibration (random and sine) ETSI 300 019-1-5 class 5M3 Dust and water Ingress Protection • IP54 for all transceiver models (even with cables connected) • IP54 for IP54 RECH • IP55 for TSCH • IP67 for IP67 RECH • IP56 for M6 handheld control head • IP54 for M6 accessory hub INTEGRATIONS Remote control of the radio from an Android™ smartphone / tablet MXM600 is compatible with the M-Radio Control application for remote control of the radio DEVICE MANAGEMENT SOLUTIONS Customer Programming Software (CPS) • Requires CPS version 8.2 or newer • When used with the M6, requires CPS version 8.4 or newer Integrated Terminal Management (iTM) • Requires iTM version 8.2 or newer • When used with the M6, requires version 8.4 or newer Over-The-Air Updates (via iTM) Supports Over-The-Air-Programming (OTAP) for configuration (codeplug) and Over-The-Air Updates (OTA Updates) for firmware via Wi-Fi. Wired Updates (via CPS or iTM) Supports programming for configuration (codeplug) and updating radio firmware • Via a transceiver’s 26-pin rear connector • Via control head GCAI MMP connector • Via TSCH micro-USB connector • Via M6 USB-C connector REGULATORY COMPLIANCE Radio RED 2014/53/EU directive Environmental EN 50155 (IEC 60571 ED. 3.0) Automotive E-mark, ECE Regulation No.10 for Electrical/ Electronic-Subassembly Rail Certification EMC EN 50121-3-2 (IEC 62236-3-2 Ed.2.0) 6 Full performance from -30 to +60 °C. Performance may be limited when operating at extreme temperatures 11 To learn more about the MXM600, please visit: www.motorolasolutions.com/mxm600 US MILITARY STANDARD MATRIX MIL-STD 810 C MIL-STD 810 D MIL-STD 810 E MIL-STD 810 F MIL-STD 810 G MIL-STD 810 H Applicable MIL-STD Method Proc/Cat Method Proc/Cat Method Proc/Cat Method Proc/Cat Method Proc/Cat Method Proc/Cat Low pressure 500.1 I 500.2 II 500.3 II 500.4 II 500.6 II 500.6 II High temperature 501.1 I, II 501.2 I/A1, II/A1 501.3 I/A1, II/A1 501.4 I/Hot, II/ Hot 501.6 I/A1, II/A1 501.7 I/A1, II/A1 Low temperature 502.1 I 502.2 I, II 502.3 I, II 502.4 I, II 502.6 I, II 502.7 I, II Temperature shock 503.1 I 503.2 A1/C3 503.3 A1/C3 503.4 I 503.6 I-C 503.7 I-C Solar radiation 505.1 II 505.2 I/A1 505.3 I/A1 505.4 I/A1 505.6 I/A1 505.7 I/A1 Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, III 506.6 I, III 506.6 I, III Humidity 507.1 II 507.2 II 507.3 II 507.4 Yes 507.6 II/ Aggravated 507.6 II/ Aggravated Salt fog 509.1 I 509.2 I 509.3 I 509.4 Yes 509.6 Yes 509.7 Yes Blowing dust and sand 510.1 I 510.2 I, II 510.3 I, II 510.4 I, II 510.6 I, II 510.7 I, II Vibration 514.2 VIII/ CatF, XI 514.3 I/Cat10, II/Cat3 514.4 I/Cat10, II/Cat3 514.5 I/Cat24, II/Cat5 514.7 I/Cat24, II/Cat5 514.8 I/Cat24, II/Cat5 Shock 516.2 I,III, V 516.3 I, V, VI 516.4 I, V, VI 516.5 I, V, VI 516.7 I, V, VI 516.8 I, V, VI Motorola Solutions Ltd., Nova South, 160 Victoria Street, London, SW1E 5LB, United Kingdom All specifications are subject to change without notice. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. ©2025 Motorola Solutions, Inc. All rights reserved. 11-2025 [SS06]







