LANDING GEAR - LANDING GEAR WARNING HORN REPLACEMENT
Cessna 335 · Maintenance Manual
Overview
This service bulletin, MEB-32-02, provides instructions and parts for the replacement of the landing gear warning horn on Cessna Model 335, 340, and 340A aircraft. The original landing gear warning horn is no longer available, necessitating the installation of a new horn along with an additional bracket. The document outlines the compliance requirements, optional nature of the service, and detailed instructions for the removal and installation of the new horn. It is intended for aircraft owners and maintenance personnel, ensuring that they follow the correct procedures to maintain safety and compliance with FAA regulations. The bulletin also includes information on parts availability and labor hours required for the modification.
- This service bulletin is for Cessna Model 335, 340, and 340A aircraft.
- The original landing gear warning horn is no longer available and must be replaced with a new horn and bracket.
- Compliance with this bulletin is optional and at the owner's discretion.
- Detailed step-by-step instructions are provided for the removal and installation of the landing gear warning horn.
- An operational check is required after installation to ensure proper function.
Document
Source
Originally published by cessnaowner.org. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Maintenance Manual
- Year
- 2022
- Pages
- 28
- File size
- 4.2 MB
- Publisher
- cessnaowner.org
Common. Rarer than 3% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the Cessna 335.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
Cessna 335 for sale now
Free — save the 335 to your watchlist and track it in one place.
More Cessna 335manuals & documents
If you fly the Cessna 335, you may also be researching these.
In this document
Effectivity
This service bulletin applies to Cessna Model 335 aircraft with serial numbers 335-0001 through 335-0065, as well as Model 340 and 340A aircraft within their respective serial number ranges.
Compliance
Compliance with this service bulletin is optional and can be performed at the owner's discretion. However, it must be completed by a qualified mechanic following all instructions and using the specified parts.
Accomplishment Instructions
The document provides step-by-step instructions for preparing the aircraft, removing the old landing gear warning horn, and installing the new horn and bracket. Specific configurations for Model 335 and Model 340/340A are detailed, including necessary tools and materials.
Operational Check
After installation, an operational check of the new landing gear warning horn must be performed. This involves jacking the aircraft, retracting the landing gear, and ensuring the horn sounds appropriately when the flaps are in the down position.
Material Information
The bulletin includes part numbers and quantities for the required kits to complete the modification, along with instructions for the disposal of old parts.
Safety notes
- Ensure the aircraft is electrically grounded before starting maintenance procedures.
- Disconnect electrical power from the aircraft before beginning the installation.
Full document text
Multi-engine SERVICE BULLETIN MEB-32-02 TITLE LANDING GEAR - LANDING GEAR WARNING HORN REPLACEMENT EFFECTIVITY MODEL SERIAL NUMBERS 335 335-0001 thru 335-0065 340 340-0001 thru 340-0555 340A 340A0001 thru 340A1817 REASON The original landing gear warning horn is no longer available. If the landing gear warning horn needs to be replaced, a new landing gear warning horn is available and will require an additional bracket for installation. DESCRIPTION This service document provides parts and instructions to remove the original landing gear warning horn and install a new landing gear warning horn. NOTE: If the customer would like to replace the stall warning horn in conjunction with the landing gear warning horn, refer to MEB-34-06: Stall Warning Horn Replacement. NOTE: Different configurations may be installed on the aircraft. • CONFIGURATION 1: Aircraft replacing the 9910080-1 Landing Gear Warning Horn and the 9910080-2 Stall Warning Horn. • CONFIGURATION 2: Aircraft replacing only the 9910080-1 Landing Gear Warning Horn. • CONFIGURATION 3: Aircraft that have installed CONFIGURATION 2, from MEB-34-06: Stall Warning Horn Replacement, that have a 9910080-6 Stall Warning Horn, and the 9910080-1 Landing Gear Warning Horn needs to be replaced. NOTE: The removal and installation procedures are the same for all Model 335 and 340/340A airplanes. COMPLIANCE OPTIONAL. This service document can be accomplished at the discretion of the owner. A service document published by Textron Aviation may be recorded as completed in an aircraft log only when the following requirements are satisfied: 1) The mechanic must complete all of the instructions in the service document, including the intent therein. 2) The mechanic must correctly use and install all applicable parts supplied with the service document kit. Only with written authorization from Textron Aviation can substitute parts or rebuilt parts be used to replace new parts. 3) The mechanic or airplane owner must use the technical data in the service document only as approved and published. 4) The mechanic or airplane owner must apply the information in the service document only to aircraft serial numbers identified in the Effectivity section of the document. 5) The mechanic or airplane owner must use maintenance practices that are identified as acceptable standard practices in the aviation industry and governmental regulations. MEB-32-02 October 11, 2022 Page 1 of 25 Textron Aviation Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800 This document contains technical data and is subject to U.S. export regulations. This information has been exported from the United States in accordance with export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991 COPYRIGHT © 2022 MEB-32-02 Page 2 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 No individual or corporate organization other than Textron Aviation is authorized to make or apply any changes to a Textron Aviation-issued service document or flight manual supplement without prior written consent from Textron Aviation. Textron Aviation is not responsible for the quality of maintenance performed to comply with this document, unless the maintenance is accomplished at a Textron Aviation-owned Service Center. APPROVAL Textron Aviation received FAA approval for the technical data in this publication that changes the airplane type design. FLIGHT CREW OPERATIONS No Changes CONSUMABLE MATERIAL You must use the consumable materials that follow, or their equivalent, to complete this service document. NAME NUMBER MANUFACTURER USE Color Chemical Film Treatment Alodine 1132 Touch n Prep Pen Commercially Available To protect bare aluminum surface. TOOLING No specialized tooling is required to complete this service document. WEIGHT AND BALANCE INFORMATION Negligible REFERENCES Cessna Model 335 Maintenance Manual Cessna Model 340 Parts Catalog Cessna Model 340 and 340A (1972-1984) Service Manual. MEB-34-06: Stall Warning Horn Replacement NOTE: To make sure all publications used are complete and current. Refer to www.txtavsupport.com. PUBLICATIONS AFFECTED Cessna Model 335 Parts Catalog Cessna Model 340 Parts Catalog ACCOMPLISHMENT INSTRUCTIONS 1. Prepare the airplane for maintenance. A. Make sure that the airplane is electrically grounded. B. Make sure that all switches are in the OFF/NORM position. C. Disconnect electrical power from the airplane. (1) Disconnect external electrical power. (2) Disconnect the airplane battery. Multi-engine SERVICE BULLETIN MEB-32-02 D. Attach maintenance warning tags to the battery and external power receptacle that have "DO NOT CONNECT ELECTRICAL POWER - MAINTENANCE IN PROGRESS" written on them. NOTE: Use the references that follow for the removal and operational procedures. MODEL 335 • Model 335 Maintenance Manual Chapter 32, Position and Warning - Maintenance Practices. MODEL 340 and 340A • Model 340 Parts Catalog Section 2 Part 1 - Group Assembly Parts List - Airplane Assembly, Figure 164 - Electrical Equipment Installation. • Model 340 and 340A (1972-1984) Service Manual. 2. Gain access as required to get to the 9910080-1 Landing Gear Warning Horn. CONFIGURATION 1 3. (For Model 340 Refer to Figure 1, Sheet 1, and for Model 335/340A Figure 2, Sheet 1.) Remove the 9910080-1 Landing Gear Warning Horn as follows: A. Remove and discard the screw and lock washer from the 9910080-1 Landing Gear Warning Horn. B. Disconnect and label the electrical wiring from the 9910080-1 Landing Gear Warning Horn. C. Discard all electrical hardware from the 9910080-1 Landing Gear Warning Horn. D. Discard the 9910080-1 Landing Gear Warning Horn. E. Remove and discard the screw and lock washer from the 9910080-2 Stall Warning Horn. F. Disconnect and label the electrical wiring from the 9910080-2 Stall Warning Horn. G. Discard all electrical hardware from the 9910080-2 Stall Warning Horn. H. Discard the 9910080-2 Stall Warning Horn.
Show full textShow less
I. Remove and keep the mounting screws from the 5118331-X Channel. NOTE: The kept mounting screws will be used during installation. J. Discard the 5118331-X Channel. 4. (For Model 340 Refer to Figure 3, Sheet 1 and 2, and for Model 335/340A Figure 4, Sheet 1 and 2.) Install the 9910080-5 Landing Gear Warning Horn as follows: NOTE: To install the 9910080-6 Stall Warning Horn, reference CONFIGURATION 1 procedures and parts from MEB-34-06: Stall Warning Horn Replacement. A. (For Model 340 airplanes.) Match drill the two Number 24 (0.152 inch diameter) holes of the 5318100 Plate Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. (3) Install the 5290604-5 Bracket with the two kept mounting screws and the two NAS1149FN632P Washers into the 5318100 Plate Assembly. (4) Go to Step 4C. B. (For Model 335/340A airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 5318100 Plate Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. MEB-32-02 October 11, 2022 Page 3 MEB-32-02 Page 4 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 (3) Install the 5290604-5 Bracket with the two kept mounting screws and the two NAS1149FN832P Washers into the 5318100 Plate Assembly. C. Install the 9910080-5 Landing Gear Warning Horn into the 5290604-5 Bracket. D. Install the knurled nut onto the 9910080-5 Landing Gear Warning Horn. NOTE: The plastic knurled nut must be installed with the three indents toward the bracket and horn assembly. On the internal circumference, the smooth side without threads is installed first, towards the bracket and horn. This technique of installation will make sure the nut fully seats against the bracket and not bottom-out on the threads. If not installed correctly the knurled nut will bottom-out on the threads and the horn assembly will not be fully tightened in the bracket. E. Install the labeled electrical wiring, screws, and the two MS35333-37 Lock Washers into the 9910080-5 Landing Gear Warning Horn. NOTE: The screws are supplied with the 9910080-5 Landing Gear Warning Horn. 5. Install the 9910080-6 Stall Warning Horn. (Refer to MEB-34-06: Stall Warning Horn Replacement, CONFIGURATION 1.) 6. Do the operational check of the 9910080-5 Landing Gear Warning Horn as follows: A. Remove the maintenance warning tags and connect the airplane battery. B. Jack the airplane until all tires are off of the ground. C. Retract the landing gear to the up and locked position. D. Put the flap lever to the full down position. NOTE: The landing gear warning horn should produce and audible sound once the flaps are at the approach position. E. Put the flap lever to the full up position. F. Extend the landing gear to the down and locked position. G. Put the aircraft onto the ground and remove the aircraft jacks. 7. Go to Step 19. CONFIGURATION 2 8. (For Model 340 Refer to Figure 1, Sheet 1, and for Model 335/340A Figure 2, Sheet 1.) Remove the 9910080-1 Landing Gear Warning Horn as follows: A. Remove and discard the screw and lock washer from the 9910080-1 Landing Gear Warning Horn. B. Disconnect and label the electrical wiring from the 9910080-1 Landing Gear Warning Horn. C. Discard all electrical hardware from the 9910080-1 Landing Gear Warning Horn. D. Discard the 9910080-1 Landing Gear Warning Horn. E. Remove and keep the screw and lock washer from the 9910080-2 Stall Warning Horn. NOTE: The kept screw and lock washer will be used during installation. F. Keep the 9910080-2 Stall Warning Horn. NOTE: The kept 9910080-2 Stall Warning Horn will be used during installation . G. Remove and keep the mounting screws from the 5118331-X Channel. NOTE: The kept mounting screws will be used during installation. H. Discard the 5118331-X Channel. Multi-engine SERVICE BULLETIN MEB-32-02 9. (For Model 340 Refer to Figure 5, Sheet 1 and 2, and for Model 335/340A Figure 6, Sheet 1 and 2.) Install the 9910080-5 Landing Gear Warning Horn as follows: A. (For Model 340 airplanes.) Match drill the two Number 24 (0.152 inch diameter) holes of the 5318100 Plate Assembly to the 5290604-3 Bracket. (1) Debur the drilled holes from the 5290604-3 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. (3) Install the 5290604-3 Bracket with the two kept mounting screws and the two NAS1149FN632P Washers into the 5318100 Plate Assembly. (4) Go to Step 9C. B. (For 335/340A airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 5318100 Plate Assembly to the 5290604-3 Bracket. (1) Debur the drilled holes from the 5290604-3 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. (3) Install the 5290604-3 Bracket with the two kept mounting screws and the two NAS1149FN832P Washers into the 5318100 Plate Assembly. C. Install the 9910080-5 Landing Gear Warning Horn into the 5290604-3 Bracket. D. Install the knurled nut onto the 9910080-5 Landing Gear Warning Horn. NOTE: The plastic knurled nut must be installed with the three indents toward the bracket and horn assembly. On the internal circumference, the smooth side without threads is installed first, towards the bracket and horn. This technique of installation will make sure the nut fully seats against the bracket and not bottom-out on the threads. If not installed correctly the knurled nut will bottom-out on the threads and the horn assembly will not be fully tightened in the bracket. E. Install the labeled electrical wiring, screws, and the two MS35333-37 Lock Washers into the 9910080-5 Landing Gear Warning Horn. NOTE: The screws are supplied with the 9910080-5 Landing Gear Warning Horn. 10. Install the 9910080-2 Stall Warning Horn into the 5290604-3 Bracket with the kept screw and lock washer. 11. Do the operational check for the stall warning horn as follows: A. Remove the maintenance warning tags and connect the airplane battery. B. Put the avionics power switch to the ON position. C. On the left wing tip, activate the stall vane by pushing the tab up. NOTE: The stall warning horn should produce an audible sound. 12. Do the operational check of the 9910080-5 Landing Gear Warning Horn as follows: A. Jack the airplane until all tires are off of the ground. B. Retract the landing gear to the up and locked position. C. Put the flap lever to the full down position. NOTE: The landing gear warning horn should produce and audible sound once the flaps are at the approach position. D. Put the flap lever to the full up position. E. Extend the landing gear to the down and locked position. F. Put the aircraft onto the ground and remove the aircraft jacks. MEB-32-02 October 11, 2022 Page 5 MEB-32-02 Page 6 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 13. Go to Step 19. CONFIGURATION 3 NOTE: Make sure that CONFIGURATION 2 from MEB-34-06: Stall Warning Horn Replacement has been installed. 14. (For Model 340 Refer to Figure 7, Sheet 1, and for Model 335/340A Figure 9, Sheet 1.) Remove the 9910080-1 Landing Gear Warning Horn as follows: A. Remove and discard the washer and lock screw from the 9910080-1 Landing Gear Warning Horn. B. Disconnect and label the electrical wiring from the 9910080-1 Landing Gear Warning Horn. C. Discard all electrical hardware from the 9910080-1 Landing Gear Warning Horn. D. Discard the 9910080-1 Landing Gear Warning Horn. E. Remove and keep the 9910080-6 Stall Warning Horn. NOTE: The kept 9910080-6 Stall Warning Horn will be used during installation. F. Remove and keep the two mounting screws and the two washers from the 5290604-3 Bracket. NOTE: The kept mounting screws and washers will be used during installation. G. Discard the 5290604-3 Bracket. 15. (For Model 340 Refer to Figure 8, Sheet 1 and 2, and for Model 335/340A Figure 10, Sheet 1 and 2.) Install the 9910080-5 Landing Gear Warning Horn as follows: A. (For Model 340 airplanes.) Match drill the two Number 24 (0.152 inch diameter) holes of the 5318100 Plate Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. (3) Install the 5290604-5 Bracket with the two kept mounting screws and the two kept washers into the 5318100 Plate Assembly. (4) Go to Step 15C. B. (For Model 335/340A airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 0818109 Support Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. (3) Install the 5290604-5 Bracket with the two kept mounting screws and the two kept washers into the 5318100 Plate Assembly. C. Install the 9910080-5 Landing Gear Warning Horn into the 5290604-5 Bracket. D. Install the knurled nut onto the 9910080-5 Landing Gear Warning Horn. NOTE: The plastic knurled nut must be installed with the three indents toward the bracket and horn assembly. On the internal circumference, the smooth side without threads is installed first, towards the bracket and horn. This technique of installation will make sure the nut fully seats against the bracket and not bottom-out on the threads. If not installed correctly the knurled nut will bottom-out on the threads and the horn assembly will not be fully tightened in the bracket. E. Install the labeled electrical wiring, screws, and the two MS35333-37 Lock Washers into the 9910080-5 Landing Gear Warning Horn. NOTE: The screws are supplied with the 9910080-5 Landing Gear Warning Horn. Multi-engine SERVICE BULLETIN MEB-32-02 16. Install the kept 9910080-6 Stall Warning Horn into the 5290604-5 Bracket. 17. Do the operational check for the stall warning horn as follows: A. Remove the maintenance warning tags and connect the airplane battery. B. Put the avionics power switch to the ON position. C. On the left wing tip, activate the stall vane by pushing the tab up. NOTE: The stall warning horn should produce an audible sound. 18. Do the operational check of the 9910080-5 Landing Gear Warning Horn as follows: A. Jack the airplane until all tires are off of the ground. B. Retract the landing gear to the up and locked position. C. Put the flap lever to the full down position. NOTE: The landing gear warning horn should produce and audible sound once the flaps are at the approach position. D. Put the flap lever to the full up position. E. Extend the landing gear to the down and locked position. F. Put the aircraft onto the ground and remove the aircraft jacks. 19. Put the avionics power switch to the OFF position. 20. Disconnect the airplane battery. 21. Install all access panels and interior that were removed during this bulletin. 22. Make an entry in the airplane logbook that states compliance and method of compliance with this service document. MEB-32-02 October 11, 2022 Page 7 MEB-32-02 Page 8 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 1. 340 Before Modification (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 2. 335/340A Before Modification (Sheet 1) MEB-32-02 October 11, 2022 Page 9 MEB-32-02 Page 10 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 3. 340 Configuration 1 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 3. 340 Configuration 1 (Sheet 2) MEB-32-02 October 11, 2022 Page 11 MEB-32-02 Page 12 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 4. 335/340A Configuration 1 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 4. 335/340A Configuration 1 (Sheet 2) MEB-32-02 October 11, 2022 Page 13 MEB-32-02 Page 14 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 5. 340 Configuration 2 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 5. 340 Configuration 2 (Sheet 2) MEB-32-02 October 11, 2022 Page 15 MEB-32-02 Page 16 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 6. 335/340A Configuration 2 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 6. 335/340A Configuration 2 (Sheet 2) MEB-32-02 October 11, 2022 Page 17 MEB-32-02 Page 18 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 7. 335 Before Configuration 3 Modification (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 8. 335 Configuration 3 (Sheet 1) MEB-32-02 October 11, 2022 Page 19 MEB-32-02 Page 20 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 8. 335 Configuration 3 (Sheet 2) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 9. 335/340A Before Configuration 3 Modification (Sheet 1) MEB-32-02 October 11, 2022 Page 21 MEB-32-02 Page 22 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 Figure 10. 335/340A Configuration 3 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-02 Figure 10. 335/340A Configuration 3 (Sheet 2) MEB-32-02 October 11, 2022 Page 23 MEB-32-02 Page 24 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-02 MATERIAL INFORMATION CONFIGURATION 1 order the kit below to install this modification. NOTE: To install the stall warning horn in conjunction with the 9910080-5 Landing Gear Warning Horn, order the kit from MEB-34-06: Stall Warning Horn Replacement. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION MEB-32-02-0 1 Kit, consisting of the following parts: MS35333-37 2 Lock Washer N/A Install NAS1149FN632P 2 Washer N/A For Model 340 airplanes. NAS1149FN832P 2 Washer N/A For Model 335/340A airplanes. 5290604-5 1 Bracket 5118331-X Discard 9910080-5 1 Landing Gear Warning Horn 9910080-1 Discard MEB-32-02 1 Instructions CONFIGURATION 2 order the kit below to install this modification. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION MEB-32-02-1 1 Kit, consisting of the following parts: MS35333-37 2 Lock Washer N/A Install NAS1149FN632P 2 Washer N/A For Model 340 airplanes. NAS1149FN832P 2 Washer N/A For Model 335/340A airplanes. 5290604-3 1 Bracket 5118331-X Discard 9910080-5 1 Landing Gear Warning Horn 9910080-1 Discard MEB-32-02 1 Instructions CONFIGURATION 3 order the kit below to install this modification. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION MEB-32-02-2 1 Kit, consisting of the following parts: MS35333-37 2 Lock Washer N/A Install Multi-engine SERVICE BULLETIN MEB-32-02 NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION 5290604-5 1 Bracket 5290604-3 Discard 9910080-5 1 Landing Gear Warning Horn 9910080-1 Discard MEB-32-02 1 Instructions Based on availability and lead times, parts may require advanced scheduling. * Please contact a Textron Aviation Authorized Service Facility for current cost and availability of parts listed in this service document. MEB-32-02 October 11, 2022 Page 25 Multi-engine OWNER ADVISORY MEB-32-02 TITLE LANDING GEAR - LANDING GEAR WARNING HORN REPLACEMENT TO: Cessna Model 335, 340, and 340A Aircraft Owners REASON The original landing gear warning horn is no longer available. If the landing gear warning horn needs to be replaced, a new landing gear warning horn is available and will require an additional bracket for installation. COMPLIANCE OPTIONAL. This service document can be accomplished at the discretion of the owner. LABOR HOURS For planning purposes only: WORK PHASE LABOR-HOURS Modification As Required Test and Inspection As Required MATERIAL AVAILABILITY PART NUMBER AVAILABILITY COST MEB-32-02-0 * * MEB-32-02-1 * * MEB-32-03-2 * * * Please contact a Textron Aviation Authorized Service Facility for current cost and availability of parts listed in this service document. Based on availability and lead times, parts may require advanced scheduling. WARRANTY None NOTE: As a convenience, service documents are now available online to all our customers through a simple, free-of-charge registration process. If you would like to sign up, please visit the Customer Access link at www.txtavsupport.com to register. MEB-32-02 October 11, 2022 Page 1 of 1 Textron Aviation Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800 This document contains technical data and is subject to U.S. export regulations. This information has been exported from the United States in accordance with export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991 COPYRIGHT © 2022
What's in the Cessna 335 TCDS
A Type Certificate Data Sheet (TCDS) is the FAA's record of what an aircraft type was approved as. It is the source of truth for weights, seating, fuel and the rules the design was certified against. Expand any line to see what it means.
38 Cessna 335 parts for sale
See all →
Parts listed for sale by vetted eBay sellers — confirmed on eBay at checkout.