CESSNA 337G — Wiring Diagram

The Vizion Installation Guide provides detailed instructions for installing the Vizion PMA Autopilot system in various aircraft models, including the Cessna 185. It covers mounting, wiring, and operational considerations necessary for a successful installation. The guide is intended for aircraft technicians and pilots who are involved in the installation and setup of the autopilot system. It includes specific wiring diagrams, installation procedures, and troubleshooting tips to ensure the autopilot functions correctly once installed. The document emphasizes safety and compliance with installation standards to prevent any interference with aircraft operations.

• Maximum recommended viewing angle for the controller is 20 degrees.
• Use AWG #20 wire for all power and ground connections.
• Ensure that the autopilot master switch is easily accessible to the pilot.
• Connections to the pitot and static systems are required for autopilot functionality.
• Follow proper installation standards to avoid interference with aircraft operations.