Weight & Balance for Cessna P337G

Oetiker 133 Stainless Steel MI-Clamp 13.3mm open position / 11.4mm pinched position 15-08417 --- Oetiker 145 Stainless Steel MI-Clamp 14.5mm open position / 12.6mm pinched position 15-08418 --- Oetiker 170 Stainless Steel MI-Clamp 17.0mmopen position / 15.1mm pinched position 15-08419 --- Oetiker 198 Stainless Steel MI-Clamp 19.8mm (3/4”) open position / 17.0mm pinched position 15-08420 --- 111 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. CLAMPS 200 HOSE CLAMPS Aero-Seal stainless steel clamps are for indus- trial & aircraft applications. This tangen tial worm- screw type clamp is for use on fuel, oil, air & coolant lines. The worm drive provides uni- form clamping pressure without distort ing hose. Tighten slotted head with screwdriver. QS200 Dash No. Dia. Range (In.) Price Each QS200 Dash No. Dia. Range (In) Price Each Min. Max. Min. Max. -06H 7/16 25/32 --- -44H 2-5/16 3-1/4 --- -08H 1/2 29/32 --- -48H 2-9/16 3-1/2 --- -10H 9/16 1-1/16 --- -52H 2-13/16 3-3/4 --- -12H 11/16 1-1/4 --- -56H 3-1/16 4 --- -16H 13/16 1-1/2 --- -60H 3-5/16 4-1/4 --- -20H 13/16 1-3/4 --- -64H 3-9/16 4-1/2 --- -24H 1-1/16 2 --- -72H 4-1/8 5 --- -28H 1-5/16 2-1/4 --- -80H 4-5/8 5-1/2 --- -32H 1-9/16 2-1/2 --- -88H 5-1/8 6 --- -36H 1-13/16 2-3/4 --- -96H 5-5/8 6-1/2 --- -40H 2-1/16 3 --- --- --- --- --- Less 15% in lots of 50. May be assorted. 200 WING HOSE CLAMPS Perforated Stainless Steel worm-drive clamp. Heavy-duty four-piece Quadra-Lock construction enables far more tightening torque to be deliv- ered to the band perforations. Use for aircraft and heavy-duty industrial applications. Conical Arched Perforated Slots: More steel between perforations for added strength and smoother worm-drive engagement. Made in the USA QS200 Dash No. Dia. Range (In.) Price Each QS200 Dash No. Dia. Range (In) Price Each Min. Max. Min. Max. -06W 7/16 25/32 --- -24W 1-1/16 2 --- -08W 1/2 29/32 --- -28W 1-9/16 2-1/4 --- -10W 9/16 1-1/16 --- -32W 1-9/16 2-1/2 --- -12W 11/16 1-1/4 --- -36W 1-13/16 2-3/4 --- -16W 13/16 1-1/2 --- -40W 2-1/16 3 --- BREEZE AERO-SEAL ® 300 SERIES CLAMPS The original perforated stainless steel worm- gear clamp. Heavy duty four-piece Quadra-Lock construction enables far more tightening torque to be delivered to the band perforations. Use for aircraft and heavy-duty industrial applications. • 9/16” (14.2 mm) band • 5/16” (7.9 mm) slotted hex screw • Per SAE standard J1508 Type “F” SAE Size Description Min Max Part Number Price 6 Breeze Clamp 300-06H 7/16” 25/32” 05-14905 --- 8 Breeze Clamp 300-08H 1/2” 29/32” 05-14906 --- 10 Breeze Clamp 300-10H 9/16” 1-1/16” 05-14907 --- 12 Breeze Clamp 300-12H 11/16” 1-1/4” 05-14908 --- 16 Breeze Clamp 300-16H 13/16” 1-1/2” 05-14909 --- 20 Breeze Clamp 300-20H 13/16” 1-3/4” 05-14910 --- 24 Breeze Clamp 300-24H 1-1/16” 2” 05-14911 --- 28 Breeze Clamp 300-28H 1-5/16” 2-1/4” 05-14912 --- 32 Breeze Clamp 300-32H 1-9/16” 2-1/2” 05-14913 --- 36 Breeze Clamp 300-36H 1-13/16” 2-3/4” 05-14914 --- 40 Breeze Clamp 300-40H 2-1/16” 3” 05-14915 --- 44 Breeze Clamp 300-44H 2-5/16” 3-1/4” 05-14916 --- 48 Breeze Clamp 300-48H 2-9/16” 3-1/2” 05-14917 --- 52 Breeze Clamp 300-52H 2-13/16” 3-3/4” 05-14918 --- 56 Breeze Clamp 300-56H 3-1/16” 4” 05-14919 --- 60 Breeze Clamp 300-60H 3-5/16” 4-1/4” 05-14920 --- 64 Breeze Clamp 300-64H 3-9/16” 4-1/2” 05-14921 --- 72 Breeze Clamp 300-72H 1-7/8” 5” 05-14922 --- 80 Breeze Clamp 300-80H 2-1/2” 5-1/2” 05-14923 --- 88 Breeze Clamp 300-88H 3-1/8” 6” 05-14924 --- 96 Breeze Clamp 300-96H 3-5/8” 6-1/2” 05-14925 --- 104 Breeze Clamp 300-104H 4-1/8” 7” 05-14926 --- 128 Breeze Clamp 300-128H 5-5/8” 8-1/2” 05-14927 --- 152 Breeze Clamp 300-152H 7-1/8” 10” 05-14928 --- 188 Breeze Clamp 300-188H 9-3/8” 12-1/4” 05-14929 --- BREEZE LINER CLAMPS An integral extension of the band as an inner liner protects soft-surface hose (silicone and others) from damage caused by extrusion or shearing through the band slots. Liner clamps afford maximum protection to soft hoses while providing a true concentric seal. Standard 1/2” (12.7mm) band 5/16” (7.9mm) slotted hex head screw Per SAE standard J1508 Type “F” SAE Size Description Min Max Part Number Price 6 Breeze Clamp 9406H 7/16" 25/32" 05-14930 --- 8 Breeze Clamp 9408H 1/2" 29/32" 05-04708 --- 10 Breeze Clamp 9410H 9/16" 1-1/16" 05-14931 --- 12 Breeze Clamp 9412H 11/16 1-1/4 05-04709 --- 16 Breeze Clamp 9416H 13/16 1-1/2 05-04711 --- 20 Breeze Clamp 9420H 13/16" 1-3/4" 05-14932 --- 24 Breeze Clamp 9424H 1-1/16" 2" 05-14933 --- 28 Breeze Clamp 9428H 1-5/16" 2-1/4" 05-14934 --- 32 Breeze Clamp 9432H 1-9/16" 2-1/2" 05-14935 --- 36 Breeze Clamp 9436H 1-13/16" 2-3/4" 05-14936 --- 40 Breeze Clamp 9440H 2-1/16" 3" 05-14937 --- 44 Breeze Clamp 9444H 2-5/16" 3-1/4" 05-14938 --- 48 Breeze Clamp 9448H 2-9/16" 3-1/2" 05-14939 --- 52 Breeze Clamp 9452H 2-13/16" 3-3/4" 05-14940 --- 52 Breeze Clamp 9452 2-13/16" 3-3/4" 05-15419 --- 56 Breeze Clamp 9456H 3-1/16" 4" 05-14941 --- 60 Breeze Clamp 9460H 3-5/16" 4-1/4" 05-14942 --- 64 Breeze Clamp 9464H 3-9/16" 4-1/2" 05-14943 --- 72 Breeze Clamp 9472H 1-7/8" 5" 05-14944 --- 80 Breeze Clamp 9480H 2-1/2" 5-1/2" 05-14945 --- BREEZE AERO-SEAL STAINLESS CLAMP KITS Perforated stainless steel worm-drive clamp. Heavy-duty four-piece Quadra-Lock construction enables far more tightening torque to be delivered to the band perforations. Use for aircraft and heavy-duty industrial applications. Conical Arched Perforated Slots: More steel between perforations for added strength and smoother worm- drive engagement. Made in the USA Aero-Seal Specs: • 9/16” (14.2mm) band • 5/16” (7.9mm) slotted hex screw • Per SAE standard J1508 Type “F” Pack A : Contains 2 each QS200 -52H, -64H, -72H and -80H P/N 05-00942 Pack B : Contains 2 each QS200 -8H, -12H, -24H, -32H, -40H, & -64H. P/N 05-01340 BREEZE AEROSPACE CLAMPS AN737TW SERIES Breeze offers a several products to meet vari- ous Aerospace and Military specifications includ- ing the NAS1922, NAS 1924, MS35842, and AN737TW clamps that meet Federal Supply Class 4730. Made in the USA Specifications: • 410 Stainless Steel Thumb Wing Screw • 9/16” Band in 300-Series SS • Meets Federal Supply Class 4730 Features: • Stainless Steel • Meets Federal Supply Class 4730 • Diameter Range 7/16” – 10 5/16” Part No. Min Max Price AN737TW30 11/16” 15/16” --- AN737TW44 61/64” 1 3/8” --- 112 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. LINE CLAMPS These line clamps are lightweight but tough enough for the most rugged applications. Feature single piece .030” thick alumi- num construction. No more messy bundles. Each clamp is shaped to hold braided line, tubing, or wiring securely, without pinching. Secured w/ standard tie wraps, these claps keep movement and wear to a minimum. Can be adjusted to mount on any tubing from 3/4”. AN742 PLAIN CLAMPS Plain loop-type line support clamps, made of aluminum alloy meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensile strength of 50,000 PSI. TYGON LP-1200 FUEL LINE TUBING Color: Opaque Clear This high-performance fuel tubing is intended for use with small engines. Tygon ® LP-1200 Low Permeation Fuel Tubing is specially designed to meet new EPA and CARB evaporative emission standards of 15g/m2/day. The patent- pending design and robust multi-layer construction offers superior fitting retention and resistance to swelling, hardening and cracking caused by hydrocarbon-based fluids. Features: • Transparent - Easy to diagnose fuel flow or leak problems • High purity fluoropolymer inner liner - Reduces the risk of fuel system fouling from extractable solids found in typical rubber products • Superior fuel resistance and compatible with ethanol-enhanced fuels - Worry-free operation • Excellent fitting retention - 100% seal for optimum safety • Superior flexibility - Easy assembly, routing and optimized fuel pick- up • Excellent elasticity - Prevents “necking” from over-stretching during installation • UV resistant: Meets ANSI B175.1 Annex D Standard UV testing • EPA and CARB approved I.D. (in.) O.D. (in.) Wall Thick- ness. (in.) Max. Working Pressure* (PSI) Part No. Price Per Foot 1/8 1/4 1/16 60 05-15261 --- 1/4 3/8 1/16 30 05-15262 --- SNAPPER CLAMPS A quick ratchet closure provides specific take- up, eliminating excessive tightening which may mutilate the hose. 3/8” for 1/4” fuel line ..P/N 05-00940 1”, for radiator hose ...P/N 05-00941 LOOM CLAMPS VINYL COATED Vinyl Hose Clamps. Vinyl coated galvanized steel. Temp. Range (F)-30 to +180 Clamp I.D. Part No. Price Clamp I.D. Part No. Price 1/4 15-04635 --- 5/8 15-04877 --- 3/16 15-04804 --- 1/2 15-06851 --- 3/8 15-04821 --- CLAMPS – TUBING Aluminum Dash No. For Tube O. D. (In.) Price Each Dash No. For Tube O. D. (In.) Price Each -D3 3/16 --- -D8 1/2 --- -D4 1/4 --- -D10 5/8 --- -D5 5/16 --- -D12 3/4 --- -D6 3/8 --- -D15 15/16 --- -D7 7/16 --- -D16 1 --- Less 15% in lots of 50. May be assorted. Size Part No. Price Size Part No. Price 1/4” 05-00004 --- 5/8” 05-00007 --- 3/8” 05-00005 --- 3/4” 05-00008 --- 1/2” 05-00006 --- 1” 05-00009 --- 30 piece assortment (includes 5 of each clamp) P/N 05-02205.......$33.00 Steel Dash No. For Tube O. D. (In.) Price Each Dash No. For Tube O. D. (In.) Price Each -3 3/16 --- -8 1/2 --- -4 1/4 --- -10 5/8 --- -5 5/16 --- -12 3/4 --- -6 3/8 --- -15 15/16 --- -7 7/16 --- -16 1 --- DOUBLE EAR CLAMPS • Robust, durable one-piece design offers positive, tamper resistant seal • For air and fluid media lines • One-piece design offers quick and easy installation • Smooth edges prevent damage to hose. 1/4”..........................P/N 15-04628 5/16”........................P/N 15-04870 3/8”..........................P/N 15-04816 BREEZE MINIATURE CLAMPS The best clamp for small diameter hose and tubing. Stainless steel band and hous- ing with plated carbon steel screw. Applies an even circumfer ential pressure with less torque. EAR CLAMP PINCERS WITH SIDE JAWS TOOL Side Jaw Pincer, Forged Steel, used to close ear clamps. P/N 12-03358 STANDARD EAR CLAMP TOOL Straight Jaw Pincer, Forged Steel, Normal Use of installation or removal of 5mm, 7mm, 9mm ear clamps .................P/N 12-03297 EXTRA GRIP STEEL CONDUIT CLAMPS These Extra Grip Conduit Clamps have an added feature other clamps just don’t. To help fight the susceptibility of the conduit slipping due to oil buildup in the clamp, this clamp features a groove for increased grip on coiled wire conduit. Description Part No. Price 6504 Mini Breeze Clamp .250” Thru .625” 6504 --- 6506 Mini Breeze Clamp .438” Thru .781” 6506 --- Size Material Quantity Part Number Price 3/16” Steel Single 05-13142 --- 1/4” Steel Single 05-13143 --- 3/16” Aluminum Pack of 4 05-16634-4 --- 1/4” Aluminum Pack of 4 05-16649-4 --- 113 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. NYLO-SEAL TUBING - POLY-FLO TUBING NYLO-SEAL NYLON TUBING Made of Nylon-II and is far superior to other types of Nylon tubing. It does not depend on moisture for flexibility and does not become brittle. It has excellent resistance to flexural fatigue and can be used where there is vibration or tube movement. Self-extinguishing under A.S.T.M. Test D635-44. N Tubing is rated to 1000 lbs. and is excellent for instrument lines and other low pressure applications. Use NSR tubing (2500 lb. rating) for hydraulic brake lines after verifying it is appropriate tubing for your application. POLY-FLO POLYETHYLENE TUBING Poly-Flo tubing is a flexible, economical thermoplastic tubing fabricated from high molecular weight polyeth- ylene for improved strength. The base resin has the greatest resistance to environmental stress cracking of all the regular polyethylenes. It meets A.S.T.M. D-1248-60T, Type 1, Class A, Grade 4 and Federal Specification LP-590, Type 2, Grade 7. Used for instrument or pneumatic lines. Use Nylo-Seal fittings (259-N inserts are required), nylon or polyethylene hose fittings such as 0710-153. Color - natural. I.D. Wall Part No. Price/Ft 3/16” 1/16” 05-00200 --- 1/4” 1/16” 05-00300 --- 3/8” 1/16” 05-00400 --- Black Part No. Natural Part No. OD Inches Wall Thickness Burst Pressure Min Bend Radius Weight Price per Ft. 05-01228 05-12487 1/8 0.026 2120 5/16 0.004 $0.47 05-01230 05-12489 3/16 0.039 2120 7/16 0.008 $0.82 05-01229 05-12488 1/4 .050 2120 9/16 0.015 $1.03 05-01231 05-12490 3/8 0.075 2120 1 0.032 $2.10 Black Part No. Natural Part No. OD Inches Wall Thickness Burst Pressure Min Bend Radius Weight Price per Ft. N/A 05-01009 1/8 0.023 960 3/8 0.004 $0.41 N/A 05-01010 3/16 0.025 960 1/2 0.006 $0.35 N/A 05-01011 1/4 0.035 960 1-1/4 0.015 $0.50 N/A 05-01012 3/8 0.05 960 2 0.032 $0.93 POLYURETHANE TUBING Flexible polyurethane tubing has greater abrasion and tear resistance than any other type of plastic tub- ing. Won’t age or oxidize. Excellent low temperature flexibility - avoids brittleness. Tensile strength 5900 PSI. Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. Sold by the foot. NYLAFLOW NYLON TUBING Nylon Polypenco. pressure tubing is a super tough, low friction, high flexibility tubing that can be used for cable protectors or in short pieces, as small bushings and washers. Suitable for use in oil, air, vacuum, fuel and low pressure hydraulic lines. It resists abrasion and wears better than aluminum or steel tubing. Has an extremely smooth inner surface with a very low coef- ficient of friction. Used for brake lines, and also as a conduit for the rudder cables in the Rutan VariEze and Long-EZ. Rated 1000 psi. Use Poly-Flo fittings. Suggested Temp Range: -65 to +150 Fahrenheit Sold by the foot. Type OD ID PSI Part No. Price Standard Wall 1/8 .096 1000 05-00105 --- Standard Wall 3/16 .138 1000 05-00110 --- Standard Wall 1/4 .190 1000 05-00115 --- High Bursting Pressure 1/4 .150 2500 05-04349 --- High Bursting Pressure 3/16 .111 (appx.) 2500 05-04355 --- TYGON TUBING Tygon tubing is flexible, tough, abrasion-resistant and non-aging. Ideal or hookup of airspeed pitot and static lines (not recommended for pressurized applications). Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. 3/8” O.D. x 1/4” I.D...........P/N 05-00944 Ft 1/2” O.D. x 3/8” I.D...........P/N 05-00945 Ft BING ALCOHOL RESISTANT FUEL LINE This fuel line is blue in color and does not rot or deteriorate from the inside, clogging the carburetor or fuel system. It withstands 50 PSI and tensile strength is 8000 PSI. It is resistant to temperatures of -65° to 220°F without deteriora- tion, features exceptional resistance to gasoline, oil, oxygen, and ozone, and has high elastic memory allowing use of Delrin or nylon barbed fit- tings in low pressure applications without the need for external clamps. Description ID OD Part No. Price Bing Alcohol Resistant Fuel Line 1/4 3/8 05-00500 --- Bing Alcohol Resistant Fuel Line 1/8 1/4 05-00560 --- Part No. Tube OD Wall Bend Radius PSI at 75 F PSI at 150 F Price 44-P 1/4 0.040 1.250 190 75 --- 66-P 3/8 0.062 2.00 205 80 --- 88-P 1/2 0.062 2.500 150 60 --- N TUBING NSR TUBING NEOPRENE HOSE Neoprene tubing is used in instrument hookups and for battery drains. Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. Not for use as fuel or oil lines. PRESSURE RATINGS Mfg Part No. OD ID Our Part No. Price 0585-033 3/16 1/8 05-11169 --- 0585-071 3/8 1/4 0585-071 --- 0585-107 1/2 3/8 0585-107 --- 0585-165 7/8 5/8 0585-165 --- 0585-180 1 3/4 05-04246 --- PARKER SUPER-FLEX 397 SERIES FUEL LINE HOSE Parker’s fuel line hose includes a thermoplastic barrier that helps protect atmosphere from harmful hydrocarbons that escape through the carcass of ordinary fuel hose. This hose surpasses all of CARB’s stringent permeation requirements and is similar to SAE30R7 specifications. The Super-Flex FL hose also features an abrasion and weather resistant cover to help protect from external application abuse. Approved for biodiesel fuels that meet ASTM D 6751 requirements per UL guidelines for Biodiesel compatibility. 4:1 Design factor Tube: NBR with a thermoplastic barrier Cover: Black Hypalon Reinforcement: Braided Polyester Temperature Range: -30°F to +257°F (-34°C to +125°C) Part No. ID (in.) Reinf. Braids OD (in.) OD (mm) Approx. wt. per 100 ft. Min. Bend Rad. Max Rec. WP Price Per Ft. 05-03597 1/4 1 0.500 12.7 9.7 1.5” 100 --- 05-07223 5/16 1 0.0562 14.3 11.3 2.5” 100 --- 05-03598 3/8 1 0.625 15.9 1.30 2” 100 --- VINYL TUBING This clear Vinyl tubing is strong and light weight. Use flexible vinyl tubing to transport liquids, gases, and some solids. Chemically resistant to alkalies, alcohol, aliphate, hydrocarbons, oils, and some acids. Part No. OD ID Price 0500-071 3/8 1/4 --- 0500-165 7/8 5/8 --- 0500-180 1 3/4 --- SUPER HEAVY PULSE LINE Super heavy wall clear polyurethane pulse line has an extra thick 3/32” wall that will not dampen crankcase pulse even on longer runs. Clear one piece urethane construction is not affected by fuel. Will not harden, crack, or become brittle with age. Can also be used as clear fuel line. Sold by the foot. Outside Diameter: 7/16". Inside Diameter: 1/4". Wall Thickness: 3/32" ............P/N 15-06094 CLEAR BLUE FUEL LINE Polyether-based Polyurethane Tubing offers excellent resistance to chemicals, kinking, abrasion, hydrolysis, oxidation, and ozone exposure. Our Polyether-based Polyurethane tubing excels in maintaining exceptional flexibility, high- impact strength, and above average performance in cold temperature. O.D. Description Part Number Price 1/4” Clear Blue Polyurethane Fuel Line 15-04632 --- 5/16” Clear Blue Polyurethane Fuel Line 15-04874 --- 3/8” Clear Blue Polyurethane Fuel Line 15-04818 --- BLACK MAX NYLON BRAKE LINE This is the standard brake line used with Black Max Kits. It is nylon tubing with 1/8” OD x .078” ID and 1000PSI. Sold by the Foot. ..............................P/N 06-01006 Operating Temperature Poly-Flo (Polyethylene) Nylo-Seal NSR** (Nylon 11) Burst Pressure* PSI Max. Work Pressure* PSI Burst Pressure* PSI Max. Work Pressure* PSI Room Temp. 250-600 75-160 2500 625 140°F. 125-300 37-80 1800 425 230°F. UNUSABLE 1400 350 280°F. UNUSABLE UNUSABLE *Depends on tube size and wall thickness. Working pressure based on a safety factor of 4. **Satisfactory for continuous operation up to 180°F. Becomes embrittled above this point. 114 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. EATON 303 HOSE This standard hose is used in med- pressure a/c hydraulic fuel, oil and coolant systems. An inner tube of seamless synthet ic rubber is reinforced with a synthetic-impregnated single-wire braid over a single cotton braid and an outer cover of synthet- ic-impregnated oil-resistant cotton braid. Oper at ing temperature -65° to 250°F. Conforms to MILH-8794 (supersedes MIL-H-5511A). Used with Eaton 491 hose fittings. HOSE - HOSE FITTINGS * Corresponds to dash no. of Eaton 816 hose fittings. ** Safety factor of 4. MIL-DTL 6000D OIL AND COOLANT HOSE Inside and out, MIL-DTL 6000D is designed to handle the effects of oil, alcohol, coolant, and water. The tube is oil resistant with a black cover reinforced with high strength mildew resistant yarns. It withstands extreme temperature conditions from -40°F to +250°F. Meets or exceeds U.S. military specs. Lightweight, flexible and easy-to-handle, making it the perfect hose for hard-to-get-to spots in tight engine compartments. Not recommended for fuel lines. EATON AS SEM BLY MAN DRELS FOR AIRCRAFT HOSE AS SEM BLIES For use with Eaton 491 fittings. These tools are rec- om mended to avoid damage to the sealing surface and to properly support the inner tube. Note: These are Eaton Factory Mandrels, which are highly recom mended for best results. Part No. Hose Dimensions Burst Pressure (PSI) Wt./ Ft. (Lb.) Price Per Ft. I.D. (In.) O.D. (In.) 6000-4 1/4 5/8 1,000 .14 --- 6000-5 5/16 11/16 1,000 .16 --- 6000-6 3/8 3/4 1,000 .18 --- 6000-8 1/2 7/8 1,000 .22 --- 6000-10 5/8 1 1,000 .26 --- 6000-12 3/4 1-1/8 1,000 .27 --- 6000-14 7/8 1-1/4 1,000 .32 --- 6000-16 1 1-3/8 1,000 .38 --- 6000-20 1-1/4 1-3/4 1000 --- --- 6000-24 1-1/2 2 1000 --- --- 6000-28 1-3/4 2-1/8 1000 --- --- 6000-32 2 2-3/4 1000 --- --- EATON 306 HOSE (MIL-H-5593) A low-pressure hose for instrument air & vacuum lines. Consists of an inner tube of seamless synthetic rub- ber, reinforced with a single layer of cotton braid and a synthetic rubber cover. Used with slip-over hose fittings such as the AN840 series, or with Eaton 471 hose fittings when connecting to AN type fittings. Conforms to Specification MIL-H-5593. Specify hose I.D. when ordering. Part No. Hose Dimensions Burst Pressure (PSI) Wt./ Ft. (Lb.) Price Per Ft. I.D. (In.) O.D. (In.) 306-2 .125 .344 1,000 .056 --- 306-3 .188 .406 1,000 .056 --- 306-4 .250 .469 1,000 .072 --- 306-6 .375 .594 1,000 .096 --- 306-8 .500 .750 750 .144 --- 306-10 .625 .875 700 .168 --- EATON 471 HOSE FITTING USED WITH EATON 306 HOSE Eaton 471 hose fittings consist of an AN818 nut, an exter nally threaded 37° nipple and an internally threaded hose socket. All components are anod- ized aluminum. Fittings con form to MS27404. Part No. Tube Size (In.)* AN818 Nut Thread Size Price Ea. 471-2D 1/8” 5/6-24 --- 471-4D 1/4 7/16-20 --- 471-6D 3/8 9/16-18 --- 471-8D 1/2 3/4-16 --- *Corresponds to tube O.D. of AN-type flared tube fittings. Not an Eaton dimension. Hose Size #491 Fitting P/N Mandrel P/N Price Hose Size #491 Fitting P/N Mandrel P/N Price 3/16” 491-3 S-1051-3* --- 1/2” 491-8 S-1051-8 --- 1/4” 491-4 S-1051-4* --- 5/8” 491-10 S-1051-10 --- 5/16” 491-5 S-1051-5* --- 3/4” 491-12 S-1051-12 --- 3/8” 491-6 S-1051-6* --- *With Remov able mandrel. Eaton Qty. Discount: 15% for 20 ft.; 20% for 50 ft.; 25% for 100 ft. or more (Per Item) Hose P/N* For Tubing Size Hose I.D. Max. Oper. Pressure** (PSI) Wt. per Ft. (Lb.) Price Per Ft. 303-3 3/16 1/8 3,000 .120 --- 303-4 1/4 3/16 3,000 .132 --- 303-5 5/16 1/4 3,000 .156 --- 303-6 3/8 5/16 2,000 .228 --- 303-8 1/2 13/32 2,000 .264 --- 303-10 5/8 1/2 1,750 .372 --- 303-12 3/4 5/8 1,500 .456 --- * Corresponds to dash no. of Eaton 491 hose fittings. ** Safety factor of 4. EATON 666 HOSE Eaton 666 medium pressure Teflon hose is widely used in aircraft applications handling fuel, oils, and other fluids. It is unaffected by all fuels, oils, alcohols, coolants, or solvents commonly use in aircraft. Construction of Eaton 666 hose is of spiral extruded Teflon resin for the inner tube with a reinforcement and outer cover of Type 300 Series stainless steel wire braid. The result is a lightweight hose able to withstand prolonged flexing and vibration under all service conditions. Eaton 666 hose is also use in hydraulic and pneumatic applications at pressures up to 1500 psi. Hose Part No. Hose I.D. (inches) Hose O.D. (inches) Max. Oper. Pressure Wt. Per Ft. (lbs.) Price Per Ft. 666-4 .188 .312 1500 .08 --- 666-5 .250 .375 1500 .09 --- 666-6 .313 .466 1500 .11 --- 666-8 .406 .562 1500 .14 --- 666-10 .500 .656 1500 .19 --- 666-12 .625 .789 1000 .24 --- Sold in one foot increments. Max Length:10FT MIL-DTL-6000C was superseded by this MIL-DTL-6000D Note: This hose is not recommended for use as fuel lines. Use with Hose Size Part No. Price ea. 666-4 05-01320 --- 666-5 05-01321 --- 666-6 05-01322 --- Use with Hose Size Part No. Price ea. 666-8 05-01323 --- 666-10 05-01324 --- 666-12 05-01325 --- REUSABLE 37° FITTINGS FOR #666 HOSE 471-2D EATON 491 HOSE FITTINGS USED WITH EATON 303 HOSE Eaton 491 hose fittings consist of an AN818 style nut, an externally threaded 37° nipple and an internally threaded hose socket. Fittings of sizes 3 through 6 have nuts and nipples of cadmium plated steel. Nuts and nipples for size 8 and larger are of anodized aluminum. Fittings conform to MS24587. Part No. Tube Size (In.)* AN818 Nut Thread Size** Price Each 491-3 3/16 3/8-24 --- 491-4 1/4 7/16-20 --- 491-5 5/16 1/2-20 --- 491-6 3/8 9/16-18 --- 491-8D 1/2 3/4-16 --- 491-10D 5/8 1-1/16-12 --- 491-12D 3/4 1-1/16-12 --- STRAIGHT CRIMP FLARELESS FITTINGS FOR #666 HOSE Part Number Eaton Hose Size Price ea. AE21502-E 666-4 --- AE21502-F 666-5 --- AE21502-G 666-6 --- Part Number Eaton Hose Size Price ea. AE21502-H 666-8 --- AE21502-J 666-10 --- AE21502-K 666-12 --- Crimping tool and sleeve required for assembly. SILICONE HOSE Sold by the foot (not for fuel or oil) ID OD Wt/Ft/Lbs Part No. Price 1/4” 0.45” .064 05-00659 --- 3/8” 0.67” .144 05-00660 --- 1/2” 0.80” .175 05-06925 --- 5/8” 0.95” .220 05-00661 --- 3/4” 1.07” .276 05-00671 --- 115 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. HOSE - HOSE FITTINGS - ASSEMBLIES EATON 816 & 8891 HOSE FITTINGS USED WITH EATON 601 HOSE Eaton 816 straight hose fittings and 8891 90° hose fit- tings consist of a pre-assembled nut/nipple assem bly and an internally threaded hose socket. The size 4 fit- ting has a cadmi um plated steel nut and nipple. Sizes 6, 8 and 10 nuts and nipples, and all sizes of sockets, are anodized alumi num. Note: Eaton 816 fittings are not the same as AN816 fittings. Include the word “Eaton” with Part number when ordering. EATON FIRE SLEEVE Eaton Firesleeve was specially developed to meet the fire resis tance requirements of FAATSO - C53a OR TSO - C75. May be used for all fuel, oil, hydraulic, fire extinguisher & propeller feather ing lines. “Fire-proof” hose lines as defined by FAA must withstand a direct flame for fifteen minutes under specified flow conditions without failure. “Fire-resis tant” lines must with- stand a 5-minute exposure under these conditions. “Fire-proof” hose lines are obtained when the proper size Eaton Firesleeve is selected from the chart below and properly assembled. 900591B Clamps - used to secure firesleeve material on each end over the basic hose assembly. See chart for correct size. 900591B-1C ........... Clamp I.D.= 1” ............P/N 05-02653 900591B-2C ........... Clamp I.D.= 1.5” .........P/N 05-02652 900591B-3C ........... Clamp I.D.= 2” ............P/N 05-02654 EATON AE466 Integral silicone firesleeves on Teflon 666 hose assemblies. This hose/sleeve combination meets the test require- ments of TSO-C53A Type D and TSO-C75 Type IIIA and IIIB. The Silicone sleeve is applied directly onto the metal braid an fittings to form a smooth, tight bond. Hose flexibility is not impaired. Non-age sensitive for extra- long service life. Eliminates the use of band clamps. Temperature range -65°F to +450°F. Specify hose size and length of assembly in inches and eighths of an inch from sealing surface to sealing surface. Available in blue, brown, orange, or purple. Purple is lightweight. Call 877-4-SPRUCE (777823), or email info@aircraftspruce.com for pricing and availability. Size Aeroquip Part No. -3 AE3663161BXXXX -4 AE3663161EXXXX -5 AE3663161FXXXX -6 AE3663161GXXXX Size Aeroquip Part No. -8 AE3663161HXXXX -10 AE3663161JXXXX -12 AE3663161KXXXX Quantity Discounts Same As Eaton Hose Firesleeve Clamp Installation Tool - Band Width: 1/4 in - 3/8 in P/N 05-00447 Part No. Use with Hose # 900591B Clamp Dash # Price Per Ft. Part No. Use with Hose #/ 900591B Clamp Dash # Price Per Ft. 303 601 303 601 AE102-8 -3 -4 -1C --- AE102-16 -10 -10 -3C --- AE102-9 -4 -5 -2C --- AE102-18 -12 - -3C --- AE102-10 -5 - -2C --- AE102-20 - -12 -3C --- AE102-12 -6 -6 -2C --- AE102-22 -16 -16 -3C --- AE102-14 -8 -8 -2C --- AE102-24 - - -3C --- *Corresponds to tube O.D. of AN-type flared tube fittings. Not an Eaton dimen- sion. ** Same thread size as AN818 nut of same dash no. Less 10%, 6 - 11 Eaton fittings; Less 15%, 12 - 24 Eaton fittings; Less 20%, 25 or more Eaton Fittings May be assorted sizes and types. EATON 8846 HOSE FITTINGS Eaton 8846 45° Fitting. Swivel Flared UNJF Threads - Little Gem Reusable Fittings are noted for their out- standing performance as a result of a unique lipseal design concept. During assembly the nipple spur cuts a lip in the tube stock of the hose forming the fluid seal. Part No. Tube Size Thread Price 8846-6D 3/8 9/16-18 --- 8846-8D 1/2 3/4-16 --- 8846-10D 5/8 7/8-14 --- 8846-12D 3/4 1-1/16-12 --- 8846-16D 1 1-5/16-12 --- 8846-20D 1-1/4 1-5/8-12 --- Part No. Tube Size Thread Price 816-4 1/4 7/16-20 --- 816-6D 3/8 9/16-18 --- 816-8D 1/2 3/4-16 --- 816-10D 5/8 7/8-14 --- 816-12D 3/4 1-1/16 --- 816-16D 1 1-5/16-12 --- 816-20D 1-1/4 1-5/8-12 --- 816-32D 2 2-1/2 --- Part No. Tube Size Thread Price 8891-4 1/4 7/16-20 --- 8891-6D 3/8 9/16-18 --- 8891-8D 1/2 3/4-16 --- 8891-10D 5/8 7/8-14 --- 8891-12D 3/4 1-1/16 --- 8891-16D 1 1-5/16-12 --- 8891-20D 1-1/4 1-5/8-12 --- CUSTOM EATON 666 TEFLON HOSE ASSEMBLIES Eaton Teflon hose is constructed with a conductive, seamless smooth bore inner tube covered with a stain- less steel braid. Unattracted by fuel, oil, coolants and solvents used in aircraft systems. Service and shelf life of Eaton Teflon hose is unlimited for all practical purposes. They can be used in fuel, hydraulic and pneumatic applications at working pressures to 1500psi. Minimum burst pressures are 8000 psi sizes -3 to -8. Temperature range is -65° to +450° F. Hose assemblies prices are straight to straight. Call for 45° and 90° elbow pricing.Measurements are taken as follows: Fittings Measurement Straight to Straight End to end (overall length) Straight to 45° End of straight fitting to top of b-nut on 45° fitting Straight to 90° End of straight fitting to center of 90° fitting 45° to 45° Top of b-nut on 45° fitting to Top of b-nut on 45° fitting 45° to 90° Top of b-nut on 45° fitting to center of 90° fitting 90° to 90° Center of 90° fitting to Center of 90° fitting Call 877-4-SPRUCE (777823), or email at info@aircraftspruce.com for pricing and availability. Size Eaton Part No. -3 AE3660000BXXXX -4 AE3660000EXXXX -5 AE3660000FXXXX -6 AE3660000GXXXX Size Eaton Part No. -8 AE3660000HXXXX -10 AE3660000JXXXX -12 AE3660000KXXXX BLACK SILICONE FIRE SLEEVE This black silicone fire sleeve has a temperature range of -65°F to +2000°F. The 5/8” I.D. Fits all E185, E225 & 0-300 engine breather tubes. The 3/4” I.D. fits O-470 I IO470 breather tubes. Sold by the foot. 1/4”..........................P/N 05-06832 5/8”..........................P/N 05-00672 3/4”..........................P/N 05-04549 Hose Part Part No.* For Tubing Size Hose I.D. Max. Oper. Pressure** (PSI) Wt. per Ft. (Lb.) Price Per Ft. 601-4 1/4 7/32 1500 .114 --- 601-6 3/8 11/32 1500 .155 --- 601-8 1/2 7/16 1200 .170 --- 601-10 5/8 11/16 1200 .207 --- EATON 601/AE701 HOSE An inner tube of seamless, specially formulated synthetic rubber rein- forced with a stainless steel partial inner braid and full-coverage stain- less steel outer braid. Operating temperature -65 to 300F. Eaton 601 hose is widely used for aircraft fuel and oil lines where flexibility and light weight are prime considerations. Because of its lighter weight and lower operating pressure than type 303 hose, it is not recommended for hydraulic lines. Use with Eaton 816 hose fittings. Eaton 601/AE701 is a direct replacement for old 601 hose. AE701 hose has no shelf life and is the upgraded version of 601 hose. * Corresponds to dash no. of Eaton 816 hose fittings. ** Safety factor of 4. BLUE FIRE SLEEVE 1/2 ID size for wires or other sizes for wire insulation or firesleeve for aircraft hose assembly. Colors: Blue Size Part No. Price 1/2” 05-04712 --- 5/8” 05-04713 --- 3/4” 05-04714 --- CUSTOM CONDUCTIVE TEFLON HOSE ASSEMBLIES Stainless braid conductive Teflon hoses are among the highest quality aircraft hoses that exist. Not “Certified” but are similar in construction to high end certified aircraft hoses. Used extensively on Experimental Aircraft. To use these on a certified aircraft, please discuss with your mechanic and see AC 23-27. Rated continuous working pressure is between 2,000 and 3,000 PSI depending on dia. Rated Bursting pressure is between 8,000 and 12,000 PSI. ALL hoses are pressure tested prior to shipment. Stainless Steel Fittings are used on all hoses. Typical uses for Aircraft with 300hp and less. (Please make sure that hose diameter is suitable for your application) 3 (Primer and Brake lines) 4 (Brake Lines, Oil and Fuel Pressure lines, and certain fuel lines) 6 (Fuel Lines) 8 (Oil Lines). See these hose assemblies at www.aircraftspruce.com for price and availability. 116 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. STRATOFLEX 193 HOSE Specifications: Hose meets or exceeds the requirements of MIL-H-5593. Construction: Tube - Seamless Buna - N. Reinforcement - One braid of high tensile fiber cord. Cover - Synthetic rubber. Identification: LP-MIL-H- 5593-size, date of manufacture, manufac- turer’s code (CAGE) marked on one side of the hose. Stratoflex 193-size marked on other side of hose. Yellow markings are repeated every 12 inches. Application: Low pressure air and vacuum instrument sys- tems. Vacuum service 20”Hg sizes -2 thru -6; 10”Hg sizes -8and -10. Temperature range: -65 to +165°F / (-54 to +74°C). Part No Tube O.D. Hose ID. Max Press Weight per In. (l.b.) Price Per Ft. 193-2 .35 .125 300 .0038 --- 193-3 .41 .188 250 .0050 --- 193-4 .48 .250 200 .0058 --- 193-6 .60 .375 150 .0079 --- 193-8 .75 .500 150 .0015 --- 193-10 .87 .625 150 .0138 --- STRATOFLEX 311 STRAIGHT FLARED FITTING FOR 193 HOSE Part No. Tube O.D. Thread Price Ea. 311-2D .125 5/16-24 --- 311-3D .188 3/8-24 --- 311-4D .250 7/16-20 --- 311-6D .375 9/16-18 --- 311-8D .500 3/4-16 --- 311-10D .625 7/8-14 --- STRATOFLEX 111 HOSE STRATOFLEX HOSE & FITTINGS STRATOFLEX 300 STRAIGHT FLARED FITTINGS FOR 111 HOSE Part No. Tube O.D. Thread Price Ea. 300-3S .188 3/8-24 --- 300-4S .200 7/16-20 --- 300-5S .312 1/2-20 --- 300-6S .375 9/16-18 --- 300-8D .500 3/4-16 --- 300-10D .625 7/8-14 --- 300-12D .750 1-1/16-12 --- 300-16D 1.00 1-5/16-12 --- STRATOFLEX 646/640 45° ELBOW FLARED FITTINGS FOR 111 HOSE STRATOFLEX 649/643 90° ELBOW FLARED FITTINGS FOR 111 HOSE STRATOFLEX 676 STRAIGHT FLARED FITTINGS FOR 156 HOSE Part No. Tube O.D. Thread Price Ea. 676-3S .188 3/8-24 --- 676-4S .250 7/16-20 --- 676-5S .312 1/2-20 --- 676-6D .375 9/16-18 --- 676-8D .500 3/4-16 --- 676-10D .625 7/8-14 --- 676-12D .750 1-1/16-12 --- 676-16D 1.000 1-5/16-12 --- STRATOFLEX 680 90° ELBOW FLARED FITTINGS FOR 156 HOSE Part No. Tube O.D. Thread Price Ea. 680-3S .188 3/8-24 --- 680-4S .250 7/16-20 --- 680-5S .312 1/2-20 --- 680-6D .375 9/16-18 --- 680-8D .500 3/4-16 --- 680-10D .625 7/8-14 --- 680-12D .750 1 1/16-12 --- 680-16D 1.000 1 5/16-12 --- STRATOFLEX 156 MEDIUM PRESSURE HOSE Part No Tube O.D. Hose ID. Max Press Mini Blend Price/Ft. 156-3 .188 .156 1500 1.75 --- 156-4 .250 .219 1500 2.00 --- 156-5 .312 .281 1500 2.25 --- 156-6 .375 .344 1500 2.50 --- 156-8 .500 .438 1250 3.50 --- 156-10 .625 .562 1250 4.00 --- 156-12 .750 .688 1250 4.50 --- 156-16 1.000 .875 1000 5.50 --- STRATOFLEX 678 45° ELBOW FLARED FITTINGS FOR 156 HOSE Part No. Tube O.D. Thread Price Ea. 678-3S .188 3/8-24 --- 678-4S .250 7/16-20 --- 678-6D .375 9/16-18 --- 678-8D .500 3/4-16 --- 678-10D .625 7/8-14 --- 678-12D .750 1-1/16-12 --- Part No. Tube O.D. Thread Price Ea. 646-4S .250 7/16-20 --- 646-6S .375 9/16-18 --- 646-8D .500 3/4-16 --- 646-10D .625 7/8-14 --- 640-12D .750 1-1/16-12 --- 640-16D 1.00 1-5/16-12 --- STRATOFLEX 124 HOSE Description Part No. Price 124-3 Hose 124-3 --- 124-4 Hose 124-4 --- 124-6 Hose 124-6 --- 124-8 Hose 124-8 --- 124-10 Hose 124-10 --- STRATOFLEX 2650 FIRESLEEVE Part No. Use With Hose No. *10781-4 Clamp Price Per Ft. 124 193 111 156 2650-6 -4 - - - - - 2650-8 -6 -3 - -4 22CR --- 2650-9 - -4 - -5 22CR --- 2650-10 -8 - -4 -6 22CR --- 2650-11 - -6 - - - - 2650-12 -10 - -5,-6 -8 22CR --- 2650-13 - -8 -8 - - - 2650-14 -12 - - - 22CR --- 2650-16 - -10 -10 -10 32CR --- 2650-18 - - - -12 32CR --- 2650-20 -16 - -12 - 32CR --- 2650-22 - - -16 -16 32CR --- STRATOFLEX FIRESLEEVE END DIP Stratoflex 5027 Room temperature curing cement for Stratoflex Firesleeve. To use, dip each end of firesleeve in accordance with P-104-29 and applicable drawing. Always use current specifications. P/N 5027 Part No Tube O.D. Hose ID. Max Press Wt Per lb./In. Price Per Ft. 111-4 .250 .188 3000 .0120 --- 111-5 .312 .250 3000 .0130 --- 111-6 .375 .312 2000 .0190 --- 111-8 .500 .406 2000 .0220 --- 111-10 .625 .500 1750 .0310 --- 111-12 .750 .625 1500 .0380 --- 111-16 1.00 .875 800 .0368 --- Part No. Tube O.D. Thread Price Ea. 649-4S .250 7/16-20 --- 649-6S .375 9/16-18 --- 649-8D .500 3/4-16 --- 649-10D .625 7/8-14 --- 649-12D .750 1-1/16-12 --- 117 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. Varga Enterprises operated the Eaton hose shop at Chandler Airport for over 50 years until it was acquired in 2015 by Aero Performance, a sister company of Aircraft Spruce. The Chandler facility is an Eaton approved hose shop and an FAA approved repair station, with an experienced team of hose assembly fabricators shipping hundreds of high quality hose assemblies to customers worldwide each week. For best prices and fastest delivery of your hose assembly requirements call 877-4SPRUCE or order online at WWW.AIRCRAFTSPRUCE.COM. CUSTOM HOSE ASSEMBLIES Omaha Airplane Supply was a leading Eaton hose shop for over 50 years before being acquired in 2021 by Aero Performance, a sister company of Aircraft Spruce. The Omaha facility is a supplier of a wide variety of Eaton hose assemblies to a number of aircraft OEM’s and also furnishes custom hose assemblies aircraft repair shops and aircraft owners worldwide. For best prices and fastest delivery of your hose assembly requirements call 877-4SPRUCE or order online at WWW.AIRCRAFTSPRUCE.COM. TWO EATON HOSE SHOPS TO SERVE YOU! CHANDLER, ARIZONA OMAHA, NEBRASKA CUSTOM HOSE ASSEMBLIES! Use our simple online hose order form to select your hose options and easily order online! 1-877-477-7823 www.aircraftspruce.com 118 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. 2 INCH ALUMINUM SCAT TUBE INLET This 2” Scat Tube Inlet is fabricated from 6061 Aluminum with per-drilled 3/32 rivet holes, ready to rivet to baffling. P/N 05-12782 ALUMINUM FLANGES FOR DUCTING Simplify installation of cabin, carb. heat, cabin vent lines. Aluminum flange may be welded or riveted in place. Slip ducting over outlet and secure with clamp. Discount: 10% On 20; 15% On 50, 20% On 100 (Assorted) Ducting Size Part No. Price 1” 10350-4 --- 1-1/4” 10350-5 --- 1-1/2” 10350-6 --- Made in the USA Ducting Size Part No. Price 1-3/4” 10350-7 --- 2 10350-8 --- 2-1/4” 10350-9 --- Ducting Size Part No. Price 2-1/2” 10350-10 --- 2-3/4” 10350-11 --- 3” 10350-12 --- DUCTING AIRCRAFT FLEXIBLE DUCTING (SOLD IN PRE-CUT LENGTHS) “CAT” - “CAT” type flexible hot or cold air ducting is extremely lightweight and highly flexible. Short lengths can be joined together to form a continuous length. Made of a single ply black neoprene- impregnated fiberglass with a spiral copper coated steel wire inside and wrapped with fiberglass cord on the outside. Suitable for conveying fumes and air a temperatures from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications. “SCAT” - “SCAT” type ducting has the same type construction as “CAT” except with red silicone rubber impregnation. For use in conducting extremely cold or hot air with temperatures from -65° to over 550°F. Not recommended for negative pressure applications. “CEET” - “CEET” type ducting has two plies of neoprene-impregnated fiberglass, similar to CAT except wire between plies. For use in hot or cold air applications and for conveying fumes at tem- peratures ranging from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications. “SCEET” - “SCEET” type ducting has two plies of silicone rubber-impregnat ed fiberglass, simi lar to SCAT except wire between plies. Ideal for use in conducting extremely cold or hot air at tempera- tures from -80° to over 550°F, and for conveying fumes. Not reccomended for handling liquids or highly abrasive materials, or for negative pressure applications. CAT SCAT CEET SCEET Dash No. Inside Diameter CAT TYPE SCAT TYPE CEET TYPE SCEET TYPE Part No. Price/Foot Part No. Price/Foot Part No. Price/Foot Part No. Price/Foot -2A 5/8” 05-29801 --- 05-29901 --- 05-30501 --- 05-30601 --- -3 3/4” 05-29802 --- 05-29902 --- 05-30502 --- 05-30602 --- -3A 7/8” 05-29803 --- 05-29903 --- 05-30503 --- 05-30603 --- -4 1” 05-29804 --- 05-29904 --- 05-30504 --- 05-30604 --- -5 1-1/4” 05-29805 --- 05-29905 --- 05-30505 --- 05-30605 --- -6 1-1/2” 05-29806 --- 05-29906 --- 05-30506 --- 05-30606 --- -7 1-3/4” 05-29807 --- 05-29907 --- 05-30507 --- 05-30607 --- -8 2” 05-29808 --- 05-29908 --- 05-30508 --- 05-30608 --- -9 2-1/4” 05-29809 --- 05-29909 --- 05-30509 --- 05-30609 --- -10 2-1/2” 05-29810 --- 05-29910 --- 05-30510 --- 05-30610 --- -11 2-3/4” 05-29811 --- 05-29911 --- 05-30511 --- 05-30611 --- -12 3” 05-29812 --- 05-29912 --- 05-30512 --- 05-30612 --- -13 3-1/4” 05-29813 --- 05-29913 --- 05-30513 --- 05-30613 --- -14 3-1/2” 05-29814 --- 05-29914 --- 05-30514 --- 05-30614 --- -15 3-3/4” 05-29815 --- 05-29915 --- 05-30515 --- 05-30615 --- -16 4” 05-29816 --- 05-29916 --- 05-30516 --- 05-30616 --- -18 4-1/2” 05-29818 --- 05-29918 --- 05-30518 --- 05-30618 --- 20 5” 05-29820 --- 05-29920 --- 05-30520 --- 05-30620 --- 24 6” 05-29824 --- 05-29924 --- 05-30524 --- 05-30624 --- Available in 3’, 5’, 8’ and 13’ pre-cut lengths. Use basic p/n and add -3, -5, -8, or -13 to complete the part number. Example: A 3 ft. length of Cat-8 is p/n 05-29808-3. THERMOID AERODUCT DUCTING (SOLD IN FULL LENGTH) Dash No. Inside Diameter CAT SCAT CEET SCEET Part Number Price Per 10 Foot Part Number Price Per 11 Foot Part Num ber Price Per 10 Foot Part Number Price Per 11 Foot -2A 5/8 * 05-11867 --- * 05-11864 --- * 05-11888 --- * 05-11871 --- * -3 3/4 05-11878 --- 05-11869 --- 05-11879 --- 05-11874 --- -4 1 05-11862 --- 05-11851 --- 05-11875 --- 05-11855 --- -5 1-1/4 05-11863 --- 05-11856 --- 05-12455 --- 05-11861 --- -6 1-1/2 05-12437 --- 05-11852 --- 05-12443 --- 05-11857 --- -7 1-3/4 05-12447 --- 05-12439 --- 05-12441 --- --- --- -8 2 05-12433 --- 05-11848 --- 05-12436 --- 05-11853 --- -9 2-1/4 05-12449 --- 05-11859 --- 05-12445 --- 05-11876 --- -10 2-1/2 05-12434 --- 05-11850 --- 05-12446 --- 05-11858 --- -11 2-3/4 05-12450 --- 05-11865 --- 05-12452 --- 05-11877 --- -12 3 05-12438 --- 05-11849 --- 05-12435 --- 05-11854 --- -13 3-1/4 05-12459 --- 05-11868 --- 05-12453 --- 05-11881 --- -14 3-1/2 05-12458 --- 05-11872 --- 05-12456 --- 05-11880 --- -15 3-3/4 05-12463 --- 05-11887 --- 05-12462 --- 05-11889 --- -16 4 05-12442 --- 05-11860 --- 05-12440 --- 05-11866 --- -18 4-1/2 05-12457 --- 05-11882 --- 05-12451 --- 05-11886 --- -20 5 05-12448 --- 05-11873 --- 05-12461 --- 05-11883 --- -24 6 05-12454 --- 05-11885 --- 05-12460 --- 05-11884 --- * 5/8 DIAMETER PIECES ONLY COME IN 5 FOOT LENGTHS. 119 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. HOW TO SOUNDPROOF LIGHT AIRCRAFT Sound measurement indicates that sometimes the noise levels are so high in some aircraft that damage to hearing over time can result. This “How-To” manual discusses the advanced techniques to sound proofing the light aircraft and drastically reducing such noise. Information presented is applicable to all types of planes from “puddle-jumpers” to jets. P/N 09-42755 ............ FREE SUPER SOUNDPROOFING SHEET WITHOUT ADHESIVE This material is excellent for reducing noise levels in all types of certificated and homebuilt aircraft. It is a closed cell vinyl insulating material which will not absorb water or oil. Has fire retardant qualities and meets FAR 25.853a Appendix F, Pt1. It is smooth on one side for easy attachment to the inside cabin skins, sides, top and front firewall. Excellent for helicopters as well. Furnished in bulk 48” wide sheet, it is easily cut by scissors and attached with contact cement. Available in black only. **Note: this material is priced and sold per foot.** The Flammability Report (Burn Certs) are available on request. SOUNDPROOFING – INSULATION NOXUDOL SOUNDPROOFING LIQUID A paint-on soundproofing material that is applied to metal surfaces to reduce vibration and reverberant noise. Use to fill cracks and spaces where noise can enter. Buff color and can be painted. Paint engine mounts to increase fire resistance! Odorless and non- toxic when dry. Waterbased product. Non-Flammable. Shelf life: 1-year. Not FAA approved. Gallon ...............................P/N 09-00772 SUPER SOUNDPROOFING TAPE This is a 1/8” thick by 2” wide self adhesive tape that can be placed on metal panels and wrapped around ducts to reduce vibration and reverberant noise trans- fer. Not FAA approved. 30 ft. rolls. 1” wide..............................P/N 09-00381/ea. 2” wide..............................P/N 09-42745/ea. 4” wide..............................P/N 09-00433/roll SUPER SOUNDPROOFING FLOOR MAT This heavy duty, wear resistant vinyl mat with foam backing can be placed on aircraft floors to reduce noise & vibration. 48” width Without foam backing ......P/N 09-42751/lin.ft. Thickness Wt. / Lineal ft. Part Number Price 1/8” .25 lbs. 09-42719 --- 1/4” .60 lbs. 09-42720 --- 3/8” .80 lbs. 09-42723 --- 1/2” 1.0 lbs. 09-42725 --- 3/4” 1.4 lbs. 09-42727 --- 1-1/2” 3.0 lbs. 09-72731 --- 2” 4.0 lbs. 09-42760 --- E-A-R-COMPOSITE DAMPING FOAM ADC-224 is a mid-temperature skin damping com- posite of 0.25” thick damping foam fixed with 0.005” thick aluminum foil and backed with pressure sensi- tive adhesive. Used in aircraft for weight efficient damping and to reduce radiated noise. Meets FAR 25.853 (A) for fire resistance. Furnished in 27” x 48” sheets. P/N 09-00181 / sheet Less 10% discount on 10 or more sheets SEE THE ENGINE PARTS SECTION OF THE CATALOG FOR MORE INSULATION PRODUCTS! TEFLON ANTI-CHAFE TAPE ISD Chafe Tape is a durable Teflon material with a pressure sensitive adhesive which resists solvents, and oils. Designed specifically to prevent aluminum chafing between airframes and engine cowls. It helps prevent black streaking on aircraft exterior due to cowl chafing. Not FAA/PMA approved. Operable tempera- ture range: -100°F to +500°F. Width: 1”. Roll length: 6 yds. Tkns: .012” ...............P/N 09-31805/roll TEFLON COATED FIBERGLASS ANTI-CHAFE TAPE These 1’ wide rolls of Teflon on fiberglass anti-chafe tape are excellent for use on engine cowlings to keep cowl components from chafing. The tape is available in 5 mil thick and 10 mil thick and comes with a silicone adhesive on the tape. Just peel back liner and install. Rolls are 1” wide x 36 yds long. 5 Mil Anti-Chafe tape .......P/N 05-01024/roll 10 Mil Anti-Chafe tape .....P/N 05-01025/roll 3M™ SOUND & VIBRATION DAMPING PANELS Designed for damping resonant vibrations of thin sheet metal, these panels are pressure sensitive, spe cially com pounded poly ure thane damp ing foam with an aluminum foil backing. The adhesive on the foam is protected by a peel-off paper covering. It is an excel lent insulator for conducted heat and is an excellent heat re flec tor. Fire-resistant and self-ex tin guish ing per FAA test pro ce dure. Excellent moisture re sis tance. Resis tant to most solvents. Easily applied with only hand pressure for a perma nent bond even on rough, irregular surfaces. Used extensively in commercial aircraft and highly recom- mended for metal home builts. Apply to firewall, fuselage — anywhere a vibration problem exists. Wt.4 oz./sq. ft., 1/4” thick. Meets FAR 25.853 3M Sound Damp Panel 6” x 48”..................P/N 09-30206 ea. 3M Sound Damp Panel 12” x 48”................P/N 09-30212 ea. 3M Sound Damp Panel 18” x 48”................P/N 09-30218 ea. Less 15% on 12 or more pieces ALUMINUM FOIL TAPE A 2 Mil. (50 micron) high strength aluminum foil coat- ed with an aggressive, high temperature acrylic adhe- sive system. The foil conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal. The malleable foil also conforms well around corners and to irregular surfaces. Coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick at normal temperature with superior low temperature performance below freezing - this is the ultimate in cold weather tapes. Recommended for use at normal and elevated temperatures also. Applications: Primarily used for vapor sealing fiberglass ductboard and sheet metal ducts; can also be used on FSK systems.tape described above. 2” x 25 Yd. Roll. Description Part No. Price 2” x 50 Yards 09-06181 --- SUPER SOUND PROOF WITH ADHESIVE Super Soundproofing Foam Mat for noise control: A closed cell vinyl-nitride noise con- trol FOAM suitable for application to cars, boats, planes, home and office, anywhere a noise control mat is needed. Won’t absorb moisture or odor, long lasting and durable. An excellent thermal insulator! (FAA Approved for aircraft, too!) Just apply with vinyl or contact cement to reduce and absorb sound. There may be small variances in the width of this product. 1/8” w/adhesive ...........................................P/N 09-01243 1/4” w/adhesive ...........................................P/N 09-01244 3/8” w/adhesive ...........................................P/N 09-00443 1/2” w/adhesive ...........................................P/N 09-00444 3/4” w/adhesive ...........................................P/N 09-01245 1” w/adhesive ..............................................P/N 09-01246 2” w/adhesive ..............................................P/N 09-01247 UNI-WRAP SILICONE TAPE RUBBER SELF-BONDING TAPE UniWrap silicone rubber sealing tape bonds to itself per- manently to protect, repair, join, or insulate virtually any type of part on which ordinary tape can be used. But the big difference between UniWrap and ordinary tape is that it fuses to itself permanently to form a homogenous mass and provides unprecedented pro- tection and insulating characteristics. UniWrap uses no adhesives so it is non- tacky. It has a 12 month shelf life and after fusing is unaffected by moisture, cold, heat, ozone shock, or vibration. Meets MIL-I-46852 Type II as well as strict aerospace industry performance requirements. Available in red or black. Furnished in 10 yard rolls, UniWrap is 1” wide and 0.020” thick UniWrap. Red ..............................................................P/N 09-30450 Black ............................................................P/N 09-05692 TEFLON CHAFE TAPE The T-300 is a Milky/Clear Teflon Chafe Tape that has an adhesive backing on one side. It is sold in a 1” x10’ Package and is used between Aluminum Skins as a chafe tape ........................P/N 05-11196 120 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. SOUNDEX PREMIUM AIRCRAFT SOUNDPROOF AND MATERIALS PACKAGES SoundEx™ is a premium aircraft soundproofing / insulation that incorporates excellent vibration damping and noise absorption properties. SoundExTM is a superior product compared to other products on the market because of its thermal qualities, adds less weight to aircraft (6.11 oz. per sq. ft. for 1” thickness and 5.8 oz. per sq. ft. for 3/4” thickness), and affordability. Stop the yelling and make flying fatigue a thing of the past. Improve your quality of flight with SoundExTM. Decibel Reduction Data - Decibel reductions will vary depending upon how well your aircraft is currently insulated. Our latest data indicate that you should expect noise level reduction from 4-7 dB(a) and 10-15 dB(c). From singles and light twins to corporate jets, SoundEx™ is the noise reduction option of choice. Pilots and passengers can fly and communicate in comfort. Flammability Requirements - All materials are manufactured to meet requirements for FAR 23:856 / FAR 25:856 Part II. Aircraft specific testing may be required for return to service. SOUNDEX SOUNDPROOF & INSULATION No. Aircraft Model Basic Materials (sidewall above floor/roof) Deluxe Materials (basic + floor/belly) SX-250 Footage (black mat for under carpet) BEECHCRAFT SX-01 Bonanza 35-E35 05-04256 --- 05-04256-1 --- N/A SX-02 Bonanza F35-M35 05-10770 --- 05-10770-1 --- N/A SX-03 Bonanza N35- P35, C33-E33, and F33C (and older with long 3rd window added) 05-04312 --- 05-04312-1 --- N/A SX-04 Bonanza/Baron S35-V35/F33/A55- B55 (and older with large baggage and long 3rd window added) 05-04313 --- 05-04313-1 --- N/A SX-05 Bonanza/Baron F33-G33 and B55-E55 (with extended baggage) 05-04314 --- 05-04314-1 --- N/A SX-06 Bonanza/Baron 36-A36 and B58 (through 1978 05-04315 --- 05-04315-1 --- N/A SX-07 Bonanza/Baron A36-B36 and B58 (1978 and newer) (with extended baggage) 05-04316 --- 05-04316-1 --- N/A SX-08 Bonanza 33/35/36 Windsh/d set (without fac- tory speedslope) Includes upper material forward of instrument panel 05-04317 --- N/A N/A N/A SX-09 Bonanza 33/35/36 Windsh/d set (with factory speedslope) Includes upper material forward of instrument panel 05-04318 --- N/A N/A N/A SX-10 Duke 05-04319 --- N/A N/A 9 ft. CHEYENNE SX-42 Cheyenne I & II 05-07161 --- KING AIR 90 SX-44 King Air 90 05-07158 --- N/A N/A - KING AIR 300 COMING SOON *Ensure you order the correct Bonanza Materials by checking the following modi- fications: • Bonanza 35-E35 with tiny 3rd window modification, order Materials for F35-M35. • Bonanza 35-M35 (or A33-B33) with large third window and hat shelf modification, order Materials for N35-P35. • Bonanza 35-P35 (or A33-E33) with large third window and expanded baggage modification, order Materials for S35-V35B. PIPER SX-11 Comanche PA24/ PA30 (through 1963) (*Floor not drilled for access) 05-04320 --- 05-04320-1 --- N/A SX-12 Comanche PA24/PA30 (1964 and 1965) 05-04321 --- 05-04321-1 --- N/A SX-13 Comanche PA24/PA30 (1966 and newer) 05-04322 --- 05-04322-1 --- N/A SX-14 Early Arrow, Cherokee, Warrior PA28-160, 180, 235 05-04323 --- N/A N/A 9 ft. No. Aircraft Model Basic Materials (sidewall above floor/roof) Deluxe Materials (basic + floor/belly) SX-250 Footage (black mat for under carpet) PIPER CONT. SX-15 Arrow, Cherokee, Warrior PA28-160, 180, 235 05-04324 --- N/A N/A 9 ft. SX-16 Cherokee Six, Seneca, Lance, Saratoga PA32, PA34 05-04325 --- N/A N/A 11 ft. SX-18 Navajo 05-04327 --- N/A N/A 12 ft. SX-34 Aztec 05-04329 --- N/A N/A 13 ft. TOMAHAWK SX-29 Tomahawk 05-07159 --- N/A N/A - CESSNA SX-35 150 05-04330 --- N/A N/A 6 ft. SX-36 152 05-04331 --- N/A N/A 6 ft. SX-24 170 05-04332 --- N/A N/A 8 ft. SX-20 172 05-04333 --- N/A N/A 8 ft. SX-32 177, 177 RG 05-04334 --- N/A N/A 9 ft. SX-37 180/185 05-04335 --- N/A N/A 8 ft. SX-21 182 (except earliest without rear window) 05-04336 --- N/A N/A 8 ft. 206 Coming Soon! SX-22 210 (except earliest without rear window) 05-04337 --- N/A N/A 8 ft. SX-23 310 (without rear window) 05-04338 --- N/A N/A 10 ft. SX-24 310 05-04339 --- N/A N/A 10 ft. SX-26 337, 337P 05-04340 --- N/A N/A 8 ft. SX-25 340 05-04341 --- N/A N/A 12 ft. SX-33 414A 05-04342 --- N/A N/A 13 ft. COMMANDER SX-43 112/114 05-06834 --- N/A N/A 8 ft. MOONEY SX-27 M20 to M20E 05-04344 --- N/A N/A 6 ft. SX-28 M20F to M20K 05-04345 --- N/A N/A 7 ft. M20L to M20S Coming Soon! NAVION SX-31 A, B 05-04346 --- N/A N/A N/A VAN’S RV (EXPERIMENTAL) SX-30 RV-8 (Firewall, Sidewalls, Belly) N/A N/A 05-04349-1 --- N/A SX-40 RV-10 Firewall Sidewalls, Belly N/A N/A 05-04350-1 --- N/A BULK MATERIAL SX- 1000 1-1/8” x 36” x 48” SoundEx Sheet 05-04353 --- per sheet SX-750 7/8” x 36” x 48” SoundEx Sheet 05-04354 --- per sheet SX-600 3/4” x 36” x 48” Black Mat 05-04357 --- per sheet SX-500 1/2” x 48” Black Mat 05-04358 --- per roll ft. SX-250 1/4” x 48” Black Mat 05-04359 --- per roll ft. SX-125 1/8” x 36” x 48” Black Mat 05-04360 --- per sheet SXT- 200 2” Aluminum Foil Tape 05-04364 --- per roll ft SX- 1357 SoundEx Glue 05-04365 --- per 6oz. tub 121 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. INSULATION MATERIALS BLANKET IN-A-BOX Insulating your aircraft made easy! Blanket is ready to install as is or can be modified to fit special areas. Each box contains all the materials to insulate your aircraft including an Orcotek strip blanket, tape, cut- ting knife, instructions and built-in work surface with measuring grid. Furnished as follows: 1” blanket-in-a-box contains 1 roll (1”x20”x100’) Orcotek strip blanket, 2 rolls of Orcotape OT-16A (2”), utility knife, dispenser box-work platform. P/N 09-45005/box 2” blanket-in-a-box contains 1 roll (2”x20”x50’) Orcotek strip blanket 1 roll of Orcotape OT-16A (3”), utility knife, dispenser box/work platform. P/N 09-45010/box ORCOTEK STRIP BLANKET Aircraft insulation by the foot. This durable, state-of-the-art, light weight blanket meets the thermal and acoustic requirements of the major aircraft manufacturers and is now available for your airplane. The blanket consists of fiberglass enclosed in moisture barrier. It can be used as is or cut in special shapes. Use Orcotape OT-16A 2” or 3” tape to seal the open edge(s) of the blanket. Strip blanket available in 1” thick x 20” wide or 2” thick x 20” wide. Complete 50ft rolls available. 2” thick x 20” wide .............................. P/N 09-45020/linear ft. THE INSULATOR AIRCRAFT INSULATOR MATERIAL The Insulator is one of the finest sound proofing and thermal insulation materi- als available, and will last the life of the aircraft. The dual sided Insulator panels are ideal for installation on interior skin, floor, engine covers, doors, headliners, and bulkheads. The Insulator uses multi - layered fiber plys bonded to reinforced high performance foil to provide optimum barrier to acoustics, radiant heat, thermal heat, and moisture. Insulator is available in 4’x 6’ panels or by the lineal foot (4’ wide). Install Insulator with Sticky Stuff spray adhesive (shown below) and Insul-Tape. Not FAA approved. INSULATOR PANELS Insulator – one ply 4’ x 6’ sheet. Single sided only. 3/8” thick ......................................................P/N 09-27400 ea Discount: less 15% on orders for 20 sheets (assorted) INSULATOR BY THE FOOT Single side foil, single layer #6014; 4 ft. wide. Max Temp: 200°F P/N 09-06014 /ft. Double side foil, single layer #6016; 4 ft wide. Max Temp: 200°F P/N 09-06016 /ft. Discount: less 15% for 100 ft. (per P/N) TICKY STUFF ADHESIVE Stick Stuff is one of the best performing spray adhesives available. It is ideal for installing the Insulator and has many other uses. One spray can will install two 4’ x 6’ panels. P/N 09-27415/ea. VALCO CINCINNATI MULTI-PURPOSE SEALANT Valco Cincinnati multi-purpose sealant is a paste-like, one component material that cures to a tough, rubbery solid upon exposure to moisture in the air. This sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping or running off. It adheres to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber, and painted and many plastic surfaces. Effective to -46°C (-50°F). Fully cured Valco multi-purpose sealant can be used for extended periods at temperatures up to 204°C (400°F), and for shorter periods as high as 218°C (425°F) 3 oz. tube ..................................P/N 09-00277 11.17 oz. tube ...........................P/N 09-00278 VHT FLAMEPROOF COATINGS Originally designed for NASA’s reentry spacecraft, VHT FlameProof is a scientifically formulated compound designed to withstand temps. up to 1500°F (816°C) VHT It survives where other paints can’t, shields & protects, maintains the finish, prevents rust & corrosion, and resists oils & solvents. For aircraft applications the typical use is on high tempera- ture steel components such as exhaust & turbocharging sys- tems. Excellent for use as a heat resistant & anti-corrosion coating on exhaust manifolds and turbine casings. Both Flat Aluminum and Flat Black are non-facing colors. Flat Aluminum 16 oz. aerosol spray............P/N 08-00713 Flat Black 16 oz. aerosol spray ...................P/N 08-00714 CONTEGO FIRE BARRIER LATEX PRIMER -THE FIRE STOPS HERE- Contego protects most building materials from the rav- ages of fire. Contego intumescent fire barrier products are all non-toxic, non-dermatic, and safe for pets. When exposed to fire, Contego fire retardant coatings expand to form a tough char barrier fire cannot pen- etrate. Deprived of fuel, the fire quickly dies. Contego not only helps prevent fires, it minimizes deadly smoke production, one of the leading causes of fatalities in residential and commercial fires. Intumescent fire bar- riers are nothing new, but Contego Passive Fire Barrier Latex represents a quantum leap forward in terms of quality, versatility, affordability and fire safety-all in one truly impressive fire proofing product. Size: Quart ..................................................P/N 05-02615 INSULATION REPAIR & FABRICATION TAPE Orcotape OT-16A is a lightweight, pressure sensitive, reinforced, metallized polyvinyl fluoride tape which is designed to be used in the fabrication, repair & instal- lation of thermal/acoustic blankets. It is the companion tape to be used with the Orcotek strip blanket to seal the edges. Furnished in 60yd rolls. 2” width .................... P/N 09-04565/ea. 3” width .................... P/N 09-04566/ea. 3M™ INTERAM CERAMIC BLANKET 49 INCHES BY 25 FEET 3M Interam Mat I-10A, 49 inches by 25 feet (one roll): Ceramic fiber based material that expands into low-density insulation blankets when exposed to high temperatures or flames. Outer foil layer is aluminum. P/N 03-00136 INSULATION TAPE Insulation Tape. This item is a commercial version of the government specification Mil-P-15280. It is an adhesive backed tape with a smooth upper surface. Size Part No. Price 1/8”X1”x30ROLL 05-11197 --- 1/8”X2”x30ROLL 05-11198 --- 1/8”X1/4”x10ROLL 05-11199 --- 1/8”X1/2”x30ROLL 05-11200 --- FIBERGLASS INSULATION BLANKET Ultra-light FAA compliant Thermal/Acoustic Insulation by the foot. The blanket consists of a covering film qualified to Boeing Material Spec. (BMS) BMS8-377 Ty I & II, Cl 1 and fiberglass qualified to BMS8-48 Ty III, Cl 2, Gr A. These materials meet the FAR25.856(a) flam- mability regulations as required per the BMS and are available in 1 “ or 2” thickness. The generic blanket can be cut to shape and edges sealed with BMS5-157 Ty 1, Cl 1 2 or 3, Gr A, Form 1 Tape. Complete 50ft. rolls available. 1” x 20” ........................................................P/N 09-04520 2” x 20” ........................................................P/N 09-04521 3M 361 GLASS CLOTH TAPE Constructed with a woven fiberglass backing, 3M™ Glass Cloth Tape 361 features a pressure sensitive silicone adhesive for applications requiring high- temperature resistance, high adhesion and clean removal. It is often used for high temperature applications such as sealing ducts and as a back-up strip for submerged arc welding. Colors: White. 60 yd. roll ..P/N 09-05773 122 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. FIBERFRAX HI TEMP COATING Used as a hi temp coating over Fiberfrax, or other porous materials. Can also be used as an adhesive to bond Fiberfrax or other porous material together. Coverage: 15 sq. ft. per pint & 120 sq. ft per gallon. Pint ...................................P/N 05-00800 Gallon ...............................P/N 05-00900 5 Gallon Pail.....................P/N 05-00910 NEOPRENE BAR Neoprene bar of proper Shore hardness for fabri ca tion of shock absorber donuts. Used in Osprey II nose gear. Available in 2 sizes: 1/2” Th x 2” W ..................P/N 05-02000/ft. RUBBER SHEET PACKING Will not deteriorate in petroleum products. Recom- mend ed for oil and solvent service. Wt. 6 oz. per sq. ft. 1 Size: 1/16” thick x 36” wide roll. Sold in 36” 1 width only. Price is per Lin. Ft ...P/N 05-01000 Discount: Less 15% On 20 Ft. 3M™ FIRE BARRIER 2000 A premium nonslump sealant bonds to most common con- struction material to form a flexible seal. Superior Adhesion. Remains elastomeric and is weather resistant. This product is great for through penetrations and may also be used for fire rated construction joints......P/N 05-00949 FIREWALL 2000 KIT Contains 24”x48” sheet of Firewall 2000 and one tube of firewall caulk .............................P/N 05-00950 BAFFLING MATERIAL FIBERFRAX A new material made from washed ceramic fibers with binders added to form a lightweight, flexible asbestos- free in su la tion. With stands tem pera tures to 2300° F. Ex cel lent for aircraft firewalls. Available in 24” wide rolls in 1/16” and 1/8” thicknesses. 1/16” Thick .......................P/N 05-02678 Lin ft. 1/8” Thick .........................P/N 05-02679 Lin ft. Discount Less 15% On 50 ft. Per Size HEAT-PROOF TAPE Heat-proof and fire resistant. Made of woven fiber- glass. Non-metallic, commercial grade. Withstands up to 1000°F. 2” wide x 1/16” thick. Wt. 4-1/2 lbs. per 100 ft. roll ................................P/N 09-31500/ft. Less 15% On 100 ft. NEOPRENE COATED PYROGLASS CLOTH This neoprene coated cloth is designed for applica tions where its superb heat and flame resis tance provide an extra margin of protection for people and equipment. Self-extinguishing, it is used as aircraft firewall bar- riers, protective sleeves and tadpole tape covers, flat seals, gaskets, mounts and door seals. It is ozone and weather resistant, and can be used against caustics, gasoline, oil, water and steam. It does not support combustion and will operate in continuous tempera tures from -40°F to +200°F. Thickness .070“. Sold in 60” Width only. P/N 05-00600 ft. INSPECTA-SHIELD FIRE RETARDANT PENETRANT Inspecta-Shield is a durable, non-toxic, fire retardant chem- i cal penetrant which when cured and dried, is odorless and color less. Will retard flame in mate ri als such as fabrics, poly foam, paper, and wood. Will gener ally last for the life of the product to which it has been applied. Inspecta-Shield is en vi ron men tal ly compatible and will protect sur fac es up to 2,200°. These surfaces will retain their color and resist sun rot up to 50% longer. A Class A rated flame retardant that meets F.A.R. 25.853 (a & b). 1qt. spray bottle will treat an area of 150 sq. ft. Can be applied with most garden and household sprayers. Note: Inspecta-Shield is corrosive to aluminum and other metals. If it comes in contact with metals be sure to wipe off metal and clean thoroughly. Quart ......................................................... P/N 09-05760 Gallon ..........................................................P/N 09-00274 PRE-CUT PYROGLASS CLOTH BAFFLE STRIP Cut from Pyroglass cloth above. 3”x 84 ...............................P/N 05-00700 FIREWALL BLANKET Firewall blanket is black in color. Note: This material is used for cosmetic purposes on the inside portion of a firewall to cover up an unsightly firewall. It is not fireproof and is not an actual firewall material. The maximum sheet size is 36” x 48” 36” x 48” sheet .................P/N 09-00276 24” x 48” sheet .................P/N 09-00276-2 12” x 48” sheet .................P/N 09-00276-1 FIREWALL 2000 CERAMIC BLANKET This blanket has been known to be flexible enough to cover compound curves. The heat side of the blanket is covered with stainless steel, the other side is aluminum It is easy to rivet or can be glued into position. Sold by the running foot. Temp. range up to 1000F. 24 inch wide. Note: There is a stainless steel sheet glued on to one side for extra protection. Tech Data Sheet does not include any info on this extra steel sheet. P/N 05-00948 Less 15% on 25ft. roll KOOLMAT HEAT BAR RI ER A .070 thick fiberglass textile cured to a 1/8” silicone substrate. The latter providing a good wear resistant sur face. Can be used on steel, alumi num, fi berglass, wood and plastic surfaces. It is good to tempera tures up to 1000° F and re duc es cockpit heat up to 75%. Contains no asbestos. Can be used to insulate cowl and firewall forward area. (Not used on exhaust) Color: gray on top side (silicone) and white woven cloth (fiberglass). Wt: .72 lbs. per sq. ft. Sold in 30” width by the lineal foot. Gray .................................................... P/N 09-24730 SEE THE ENGINE PARTS SECTION OF THE CATALOG FOR MORE INSULATION PRODUCTS! COWL SAVER BAFFLE SEAL MATERIAL Cowl Saver™ Baffle Seal Material has 10 times Less Friction! - One side is silicone and the other is the revolutionary friction free surface unique to the patent pending Cowl Saver™. Cowl Saver™ dramatically reduces the friction between your cowl and baffle seals. Low Friction Saves You Money! - Reduces transfer of damaging engine vibration to the en- gine cowl Minimizes cowl chaffing and erosion from baffle seals. Extends baffle seal life. Reduces expensive cowl and cowl fastener repairs. Reduces fatigue and cracking in aluminum baffles and cowl skins. The cowling even goes on easier! - Unbeatable Performance. Ideal balance of flexibility and stiffness to insure a proper seal. Fiberglass re- inforced. Meets industry standard AMS3320G specification. McFarlane quality you can count on! Not FAA-PMA approved. Part Number Thickness Size Color Spruce Price CS085X36X36G .085” 36” x 36” Gray 05-03403 $260.95 CS085X18X36G .085” 18” x 36” Gray 05-03404 $146.75 CS085X3X108G .085” 3” x 108 “ Gray 05-03405 $72.75 ACCESSORIES 6036 BAFFLE SEAL RETAINER STRIP - A baffle seal retainer strip used as a retainer for riveting baffle seals to baffles. 7/16 inch x 12 inch strips - Cut to desired length during installation. .......P/N 05-03399 RIVET KIT 2 - A baffle seal rivet kit containing soft Mil-Spec rivets that will not deform the baffles. Several sizes are included for various baffle thickness and hole sizes..............................P/N 05-03401 BAFFLE-KIT- 2 - This new baffle kit with more material. This kit is best for larger aircraft or curved baffle seals that cannot be cut from three inch strips. The new kit includes (1) 18x36 inch piece of Cowl Saver™ material, (2) Baffle Seal Rivet Kits and (10) Baffle Seal Re- taining Strips. ..............................................P/N 05-04108 ENGINE BAFFLE TEXTURED FINISH FAA approved replacement Engine Baffle. This material is easily identifiable by its textured finish. 32oz fiberglass reinforcement mat. Boasts a -60 to 550°F range. Color Size Part No. Price Size Part No. Price Black 1/8” x 3” x 9’ 05-04656 --- 1/8” x 36” x 40” 05-04657 --- Red 1/8” x 3” x 9’ 05-04658 --- 1/8” x 36” x 40” 05-04659 --- Blue 1/8” x 3” x 9 05-04660 --- 1/8” x 36” x 40” 05-04661 --- 05-03405 123 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. BAFFLE SEALS – CHAFE SEALS COWL SEAL HARDWARE & TOOLS GB4-4A: Baffle Seal Pop Rivet, Button Head. 1/8” Dia. x 3/16” Grip Requires a metal baffle strip or back-up washer to secure. Pkg. of 100 ..................................................P/N 05-56100 GB-A4: Back-up Washers Pkg of 150 ...................................................P/N 05-56130 GB-SF- 3/16: Baffle Seal Fastener (Post Type) for joining sides or overlap- ping of baffle material. Includes one male and one female piece. 1/8” NPT. Each ............................................................P/N 05-56140 GBL4-4A: Baffle Seal Pop Rivet, Large Flange, Silver. 1/8” Dia. x .187” - .250” grip range Qty. 100 .......................................................P/N 05-00134 GBL4-4AB: Black Pop Rivet, large flange for black baffle seal 1/8” x 3/16” grip. GBL4-4AB. Qty 100 ........................................................P/N 05-00483 SILICONE REVOLVING PUNCH TOOL: Makes various size holes in baffle material. Each ............................................................P/N 72 SILICONE BAFFLE SEALS Excellent for replacement of baffle seals. It exceeds asbestos type seals in dura bili ty and flexibility over its entire operating heat range of -80 F to +425 F.. Available in red, blue & black. IRON OXIDE RED: Meets Mil Spec ZZR765B. ISR3 meets Mil Spec AMS3320 (P/N 05-00770, 05-00771-3, 05-00771) AMS3303 for all others. 3/32” thick x 3” wide x 9’ long ....................P/N 05-00775 3/32” thick x 36” wide .................................P/N 05-00781/ft 3/32” thick x 3” wide ....................................P/N 05-00781-3/ft 1/8” thick x 2” wide x 9’ long .......................P/N 05-00795 1/8” thick x 3” wide x 9’ long .......................P/N 05-00755 1/8” thick x 4” wide x 9‘ long .......................P/N 05-00760 1/8” thick x 36”wide .....................................P/N 05-00772/ft 1/8” thick x 2” wide ......................................P/N 05-00772-2/ft 1/8” thick x 3” wide ......................................P/N 05-00772-3/ft 1/8” thick x 4” wide ......................................P/N 05-00772-4/ft 1/8” thick x 3”W x 9’ w/ fiberglass insert .....P/N 05-00770 1/8” thick x 36”W w/ fiberglass insert ..........P/N 05-00771/ft 1/8” thick x 3” wide w/ fiberglass insert .......P/N 05-00771-3/ft LIPSTICK RED: Meets Mil Spec ZZR765B. ISR3 meets Mil Spec AMS3303. 3/32” thick x 36” wide ..................................P/N 05-00786/ft 3/32” thick x 3” wide ....................................P/N 05-00786-3/ft DARK BLUE: Meets Mil Spec ZZR765B. ISR3 meets Mil Spec AMS3303. 3/32” think x 3” wide x 9’ long .....................P/N 05-03055 3/32” thick x 3” wide ....................................P/N 05-01831-3/ft 3/32” thick x 36” wide ..................................P/N 05-01831/ft BLUE: Meets Mil Spec ZZR765B. ISR3 meets Mil Spec AMS3303. 3/32” thick x 3” wide x 9’ long .....................P/N 05-00790 3/32” thick x 36” wide ..................................P/N 05-00806/ft 3/32” thick x 3” wide ....................................P/N 05-00806-3/ft 1/8” thick x 3”W x 9’ w/ fiberglass insert ....P/N 05-00792 1/8” thick x 36”W w/ fiberglass insert .........P/N 05-00791/ft 1/8” thick x 3” wide w/ fiberglass insert .......P/N 05-00791-3/ft BLACK: Meets Mil Spec ZZR765B. ISR3 meets Mil Spec AMS3303 (P/N 05-00810, 05-00811, 05-00811-3) AMS3320 for all others. 3/32” thick x 3” wide x 9’ long .....................P/N 05-00810 3/32” thick x 36” wide ..................................P/N 05-00811/ft 3/32” thick x 3” wide ....................................P/N 05-00811-3/ft 1/8” thick x 3”W x 9’ w/ fiberglass insert ....P/N 05-00826 1/8” thick x 36”W w/ fiberglass insert .........P/N 05-00825/ft 1/8” thick x 3” wide w/ fiberglass insert ......P/N 05-00825-3/ft ASSORTED SILICONE 50 FEET: This is a 50 foot assortment of silicone lengths, thicknesses and colors ..................P/N 05-04565 AIRCRAFT BAFFLE SEAL KITS These pre-cut baffle seal kits are cut to original specifications. Please spec- ify aircraft make, model, serial number, and color of seal. Kits are furnished with rivets, washers, drill bits, & silicone. P/N 00-00103 CALL FOR PRICE AND P/N OF KIT FOR YOUR AIRCRAFT or VISIT www.aircraftspruce.com FOR BAFFLE KIT INFORMATION. A-56-12 COWL CHAFE SEAL 3/4” Phenolic-cure Nigen Cotton Webbing used on engine cowls to protect where overlapping the airframe. Not affected by cold, heat or most solvent chemicals. 1/16” thick. P/N 05-11171 AEROSTAR ENGINE COWL ANTI-CHAFING LINER Marsh Brothers Aerostar Engine Cowl Anti- Chafing Liner kit (Chafe Protection) provides protection of the interior surface of the engine cowl where the engine airframe seals contact with the upper engine cowling assembly. By providing a tough abrasion resistant surface made from Marsh Brothers proprietary material AeroLas-White, wear on the aluminum upper engine cowl is eliminated. Unlike most other chafe protection material available our anti-chafing liners do not have an adhesive backing. Instead, they are bonded in place using 3M DP420 two-part epoxy (not included in the kit). This results in a significantly stronger bond ........P/N 05-27284 BLACK COWL SEAL 1/16” x 3” x 9’ Cowl & Engine Baffle Seal First quality woven fiberglass cloth heavily impreg- nated with neoprene for unsurpassed durabil- ity. -40° to 300°. Black. TA-8071. MIL-R-6855. 1/16” x 3” x 9’ Roll ... P/N 06-02461 1 Square Yard ......... P/N 04-02620 COWLING CHAFE CLOTH Off-white, 100% non-asbestos woven tape. Unaffected by most chemicals and tempera- tures. 1” x 15 ft. Roll ......P/N 09-31800 BAFFLE FASTENER KIT Screw Fastener (Post Type) for joining sides or overlapping of baffle material. Includes one male and one female piece. GB-SF-3/16 8-32 Threads...................P/N 05-01829 INDIVIDUAL FASTENERS Male 8-32 Thread .......................................P/N 05-01235 Female 8-32 Thread ...................................P/N 05-01236 FIBERGLASS CLOTH BAFFLE MATERIAL The same material used by several OEM aircraft manufacturers. Neoprene coated fiberglass cloth is heat & flame resistant, self-extinguishing, ozone & weather resistant, & will not support combustion. Temperature range -40F to +200F. AMS3783. Black 3” x 9” Roll .........................................P/N 05-12642 Black 36” x 36” Sheet ..................................P/N 05-12643 SILICONE CEMENT WITH CATALYST This silicone cement is the same cement that is included with some of the chafe seals and is excellent for attach- ment of any silicone seal. Note: GBSC-2 or GBSC-4 silicone cement to apply sili- cone seals requires silicone cement only for application. Storage & Shelf Life: • Best if refrigerated under 70° • 18 months shelf life when stored properly • Easier to fill 2.5 oz. ..................................P/N 05-13310 124 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. MOMENTIVE RTV157 SILICONE ADHESIVE SEALANT - 2.8 OZ TUBE - GRAY RTV157 ready-to-use, high strength silicone rubber adhesive sealants. They cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature. RTV157 sealant is a paste consistency products which can be applied to horizontal, vertical and overhead surfaces in applications requiring high strength and temperature performance. Features: • High strength • High temperature performance • Low temperature flexibility • One- component • Room temperature cure • General primerless adhesion • Excellent electrical insulation properties • Excellent weatherability, ozone, and chemical resistance .........P/N 09-05768 SERRATED POLYETHYLENE GROMSTRIP Gromstrip is a continuous length of extruded U-channel for use as a protective covering on sharp edges. It can be cut to desired length and inserted into any hole, regardless of configuration. Gromstrip requires minimum space, grips surfaces snugly, and won’t jar loose. Wherever wires pass through a metal piece, Gromstrip used on the sharp edges will protect against fraying and cutthrough of the wires. Sold in 100ft. Roll ........................................P/N 11-18312 PLIOBOND – BAFFLE SEAL – SEALANTS PLIOBOND Pliobond #20 is a viscous, quick setting highly ver- sa tile adhesive. Bonds metal; wood, plastics, fabrics; ce ram ics, glass, vulcanized rubber, paper, leather and concrete. Thin with MEK. 1/2 Pt. Brush Top Can .....P/N 09-28000 Pint Can ...........................P/N 09-28100 Quart Can.........................P/N 09-28200 PLIOBOND 25 LV Pliobond #25 LV is a viscous, quick setting highly ver- satile adhesive. Bonds metal; wood, plastics, fabrics; ceramics, glass, vulcanized rubber, paper, leather and concrete. Thin with MEK. 1/2 Pint .............................P/N 09-03812 Pint ...................................P/N 09-03813 Quart ................................P/N 09-03814 PLIOBOND 30 PLIOBOND 30 is a general purpose thermosetting adhe- sive, it provides tough, chip resistant bonds that remain flexible over a wide temperature range; excellent resistance to mechanical shock, oxidation, fungi, mold and bacteria. Typically used as a sealer, primer, water repellant, or coater. 1/2 Pint Top Can.......................P/N 09-04669 PLIOBOND 35 For seaming, splicing and bonding of gaskets, rubber mat- ting, belts and hose to rubber, wood, metal, some plastics, glass and fabrics and to themselves. Provides permanent, flexible bonding. Can be brushed, spread or roller coated. Will not get hard or brittle with age and resists most acids, oil, gasoline, grease, water and salt. P/N 09-04670 DOW CORNING RTV-3145 ADHESIVE / SEALANT Sealing openings in modules and housings; adding mechanical stability to individual components; assembly of components on PWBs; sealing in and around wires and electrical leads; yoke assembly. Clear............................................ P/N 09-02041 Gray ............................................ P/N 09-02042 DOW CORNING ® 730 FS SOLVENT RESISTANT SEALANT Dow Corning ® 730 FS Solvent Resistant Sealant is a ready-to-use, sol- ventless, nonslumping fluorosilicone rubber paste that reacts with mois- ture in the air to form a tough, rubbery solid. It is a fluid-resistant material that is ideally suited for use in many applications where resistance to fumes, splash, and sometimes even total immersion in fuels, oils and solvents is needed. Dow Corning 730 FS Solvent Resistant Sealant features good resistance to weathering, vibration, moisture, ozone, and temperature extremes. It retains its flexibility over a wide temperature. 3 oz. tube.....................................................P/N 09-00383 DOW SILASTIC RTV General-purpose single-component silicone rubber. Adheres to metals, glass, paint, ceramics, most plas- tics, and wood. Cures to a firm silicone rubber in 24 hours at room temperature. Seals windshield glass, windows, repair worn rubber parts. #732 RTV (Clear), 3 Oz. Tube ....................P/N 09-04406 #732 RTV (Clear), 4.7 Oz. Tube .................P/N 09-27800 #732 RTV (Clear) 10.10 Oz. .......................P/N 09-05636 #732 RTV (White), 3 Oz. Tube ...................P/N 09-04407 #732 RTV (White), 4.7 Oz. Tube ................P/N 09-27810 #732 RTV (White), 10.10 Oz. Tube ............P/N 09-04366 #732 RTV (Black), 4.7 Oz. Tube .................P/N 09-27815 #732 RTV (Black), 3 Oz. Tube ....................P/N 09-04367 #732 RTV (Black) 10.10 Oz. .......................P/N 09-05611 #736 Red Silicone, 3 Oz. Tube ...................P/N 09-27900 #736 Neutral Cure Sealant (Clear)..............P/N 09-05339 CRC RTV SILICONE SEALANT For general-purpose sealing, bonding, protecting and water- roofing applications. Clear formulation forms a barely visible, water-tight seal. Sealing, bonding, protection & waterproofing in HVAC, electrical, construction, metal working, for filling gaps between mating parts, gearboxes, pumps, motors & for general gasket sealing. Clear 8oz. ..........................................P/N 09-04719 Clear 12oz. ........................................P/N 09-04677 Blue 8oz.............................................P/N 09-04720 DOW CORNING 706 RED SILICONE CARTRIDGE DOWSIL™ Hi-Temp Sealant is a onepart, acetoxy-cure silicone sealant that cures to a tough, rubbery solid at room temperature on exposure to water vapor in the air. It forms a longlasting, water-resistant seal with ±25% movement capability when properly temperature applied. 800 ml........................................P/N 09-06152 DOW CORNING 700 INDUSTRIAL SEALANT DOWSIL™ 700 Industrial Grade Silicone Sealant is a one-part, acetoxy cure, adhesive sealant suitable for general industrial sealing and adhesive applications. The sealant will adhere to clean metal, glass, silicone rubber and plastic surfaces. Black 10.1 oz .....................................P/N 09-06142 Clear 10.1 oz .....................................P/N 09-06143 DOWSIL SEALANTS Sealants are used to block the penetration of liquids, gases, dust, and other contaminants by creating an adhesive barrier. Ellsworth Adhesives supplies anaerobic, silicone, polyurethane, and UV curing sealants. Products are available with a wide range of properties including base chemistry, cure mechanisms, bond strength, elongation, viscosity, weatherability, and dispensing options. Sealants are widely used for transportation, defense, consumer products, battery, general industry, lighting, medical, and power applications. Refer to the Technical Data Sheet for activator and primer recommendations for specific products. DOWSIL™ 786 SEALANT M White ...........................................................P/N 09-06156 Clear ............................................................P/N 09-06155 DOWSIL™ 738 ELECTRICAL SEALANT White 90 ml..................................................P/N 09-06153 White 300 ml................................................P/N 09-06154 DOWSIL™ 736 HEAT RESISTANT SEALANT DOWSIL™ 736 Heat Resistant Sealant non-slumping sealant designed for sealing and bonding applications exposed to temperatures as high as 315°C (600°F) .............................................P/N 09-06151 DOWSIL™ 737 NEUTRAL CURE SEALANT Black 10 oz ..................................................P/N 09-06144 White 10 oz..................................................P/N 09-06146 DOWSIL™ 734 FLOWABLE ADHESIVE SEALANT White 3 oz....................................................P/N 09-06149 White 10 oz..................................................P/N 09-06150 Clear 3 oz ....................................................P/N 09-06147 Clear 10 oz ..................................................P/N 09-06148 DOWSIL™ 733 GLASS & METAL SEALANT Black 10.1 oz ...............................................P/N 09-06139 Clear 10.1 oz ...............................................P/N 09-06140 White 10.1 oz...............................................P/N 09-06141 DOWSIL™ 732 MULTI-PURPOSE SEALANT PAIL Black 10.1 oz ...............................................P/N 09-06136 Clear 10.1 oz ...............................................P/N 09-06138 White 10.1 oz...............................................P/N 09-06137 SILICONE SAVER The Silicone Saver is a sealant dispensing tool developed for RTV silicone sealant 3oz flexible tubes. The enhanced, patented design combines the separate cap and cone nozzle into a reusable one-piece-system and is paired with a useful rod tool. Together, they solve pain points that occur while using 3oz flexible tubes of RTV silicone sealant! .......P/N 12-06292 125 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. OPEN CENTER CHANNEL 1-1/4” wide with an 1/8” x 1/2” long groove, manufactured in 12ft lengths ...........................P/N 05-01500 Ft. Neoprene sponge rubber 1/4-round door seal. 1/2” Legs, 3/4” Curve, 3/8” Radius. Hollow core makes a better seal. Manufactured in 25 Ft. lengths... P/N 05-01700 Ft RUBBER CHANNEL - COWL SEAL ANTI-CHAFE MOLDING Anti-Chafe Molding for fuel tank straps. Neoprene channel accommodates metal straps 1” wide. P/N 05-01800 ft “V” STRIP “V” Strip Canopy Channel 20 Ft. required for Long-EZ. P/N 05-01900 ft HIGH QUALITY RUBBER CHANNEL Good-grade neoprene. Soft, flexible, oil-resisting. Full lengths are 15’ strips from manufacturer. Priced and sold above by the foot. Style B: 1/2” high - right, 3/8” high-left, 1/16” Groove ..P/N 05-00596 Style C: 3/8” high, 1/8” groove, 1/4” across bottom .....P/N 05-00597 Style D: 1/2” high - left, 3/16” - right 1/32” Groove .......P/N 05-00598 Style E: 1-1/8” high, 1/4” lip right side, 1/16” Groove ...P/N 05-00599 U CHANNEL BLACK 65 DURO EPOM U-CHANNEL. Use CRL Glass and Acrylic Setting Rubber Channels if you have acrylic or glass panels you need to protect. Our Glass Setting Rubber Channels will provide you with the product you need. Available in multiple sizes for most applications. Sold per foot Groove Height Complete Roll Length Part Number Price 1/16” 3/4” 12 feet 05-01300 --- 1/32” 3/8” 15 feet 05-01400 --- 1/16” 1/2” 25 feet 05-01600 --- 1/16” 3/8” 100 feet 05-02200 --- 1/8” 5/16” 50 feet 05-00951 --- 3/16” 1/2” 50 feet 05-00952 --- SILICONE P-SEAL 50 DURO Silicone P-seal 50 duro for battery box application/lighter wall thickness 1-1/2 x 5/8 bulb. Sold by foot. Use GBL4-4AB large flange (black) pop rivets to install (P/N 05-00483) .........................P/N 05-04704 QUARTER ROUND DOOR SEAL Hollow Quarter round door seal. Medium density sponge material. Use 1100-2 contact cement. BA-10012 ..................................P/N 05-11173 ft CESSSNA/PIPER QUARTER ROUND DOOR SEAL Constructed of a medium density solid sponge material that offers excellent compression ability and resiliency when installed correctly. Use 1100-2 contact cement. RB-5022 ...................................P/N 05-11193 ft T-897 NEOPRENE RUBBER TRIM AND FERRIN SEAL The T-897 is a Neoprene Rubber Seal that is used in various different applications on the aircraft. It is manufacture from a 60 Durometer Neoprene Rubber material. It is sold per Foot with a 10 Ft min. 1/16” opening. 1” Tall. 60 Duro Neoprene Rubber. P/N 05-11202 K-15 NEOPRENE RUBBER TRIM AND FERRIN SEAL The K-15 is a Neoprene Rubber Seal that is used in various different applications on the aircraft. It is manu- facture from a 60 Durometer Neoprene Rubber mate- rial. It is sold per foot. 1/16” opening. 1 1/8” Tall. 60 Duro Neoprene Rubber.......... P/N 05-11192 BA-200 VINYL U-CHANNEL 3/8 The ba-200 is vinyl U-Channel that is used as a trim seal in various applications throughout the aircraft. It is manufactured from a vinyl material that meets the requirements of the FAR 25.853 B burn test. It is available in a Black or White color and comes in a 25Ft package. Black ............................P/N 05-11174 White ............................P/N 05-11452 T-8301 1/2 INCH J-CHANNEL 25 FOOT PACKAGE The T-8301 is vinyl U-Channel that is used as a trim seal in various applications throughout the aircraft. It is manufactured from a vinyl material that meets the requirements of the FAR 25.853 B burn test. It is available in a Black or White color and comes in a 25Ft package. Black ............................P/N 05-11201 White ............................P/N 05-11456 3/4 INCH BULB FOOT TADPOLE TAPE The VC-150 is a tadpole tape that is silicone coated for added protection. It ha