Skip to main content

Simplified Electrical Diagram

Cirrus SR22T G6 · Wiring Diagrams

Free account — keep the POHs & checklists you reference in one place.

Overview

This document provides a simplified electrical diagram for the Cirrus SR22, specifically focusing on the wiring and circuit breaker configurations. It is intended for training purposes, helping pilots and technicians understand the electrical systems of the aircraft. The diagram includes details about the circuit breaker panel, battery specifications, and distribution buses, which are crucial for troubleshooting and maintenance. The information is presented in a clear format to assist in the learning process for those involved with the Cirrus SR22 series.

  • Alt 1: 100 Amp, 28 Volt
  • Alt 2: 70 Amp, 28.75 Volt
  • Bat 1: 10 Amp-Hour, 24 Volt
  • Bat 2: 7 Amp-Hour, 24 Volt
  • Includes Main Distribution Bus 1, Main Distribution Bus 2, and Essential Distribution Bus.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

Document

Source

Copy found at takeflightsandiego.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

Report a problem or request removal

Document details

Type
·
Wiring Diagrams
Pages
·
1
File size
·
355 KB
Copy found at
·
takeflightsandiego.com
About this document
What is the Simplified Electrical Diagram?

The Simplified Electrical Diagram is a wiring diagrams for the Cirrus SR22T G6.

How many pages is the Simplified Electrical Diagram?

The copy of the Simplified Electrical Diagram on file runs 1 pages.

How rare is it?
3,596Cirrus SR22T G6 registered worldwide · 3,566 active

Common. More common than 99% of the aircraft models we track.

Documentation completeness
6/7

Most owners only have the POH. Here's the essential set for the Cirrus SR22T G6.

More Cirrus SR22T G6manuals & documents

See all 25 →

In this document

Circuit Breaker Panel

The circuit breaker panel includes two alternators: Alt 1 rated at 100 Amps and 28 Volts, and Alt 2 rated at 70 Amps and 28.75 Volts. This section is essential for understanding the power management of the aircraft.

Battery Specifications

The document specifies two batteries: Bat 1 with a capacity of 10 Amp-Hours at 24 Volts, and Bat 2 with a capacity of 7 Amp-Hours at 24 Volts. These specifications are critical for ensuring adequate power supply during flight operations.

Distribution Buses

The electrical system includes Main Distribution Bus 1, Main Distribution Bus 2, and an Essential Distribution Bus. Understanding these buses is important for managing electrical loads and ensuring system reliability.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Full document text

Circuit Breaker Panel Alt 1 100 Amp 28 Volt Alt 2 70 Amp 28.75 Volt Main Distribution Bus 1 Main Distribution Bus 2 Essential Distribution Bus Bat 1 10 Amp-Hour 24 Volt Bat 2 7 Amp-Hour 24 Volt Landing Light Simplified Electrical Diagram SR22 – Cirrus Perspective Avionics Training Purposes Only