A50NM Dassault Aviation Falcon 2000
DASSAULT FALCON 2000 · Pilot's Operating Handbook
Overview
The document is the Type Certificate Data Sheet for the Dassault Falcon 2000, issued by the FAA. It outlines the airworthiness requirements, limitations, and specifications for the aircraft, including engine performance, weight limits, and operational guidelines.
- Type Certificate No. A50NM issued to Dassault Aviation.
- The Falcon 2000 is a transport category airplane approved on February 2, 1994.
- It features two CFE Company engines, Model CFE 738-1-1B.
- Maximum take-off weight is 36,500 lb with Option M57.
- Maximum operating altitude is 47,000 ft.
- Maximum passenger capacity is 19, limited by emergency exit requirements.
- Fuel capacity is approximately 1,814 US gallons.
- The aircraft must be operated in accordance with the DGAC approved Airplane Flight Manual.
Document
Source
Originally published by ceoxaviation.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Pilot's Operating Handbook
- Year ·
- 1995
- File size ·
- 24 KB
- Publisher ·
- ceoxaviation.com
- Language ·
- en
Specifications & performance
Extracted from this document.
Specifications
- Fuel capacity (gal) ·
- 1814
- Baggage capacity (lb) ·
- 1600
- Max landing weight (lb) ·
- 33000
- Max takeoff weight (lb) ·
- 36500
- Max zero fuel weight (lb) ·
- 28660
Performance
- Max speed (kt) ·
- 350
- Max operating altitude (ft) ·
- 47000
V-speeds
- VA_KTS ·
- 198
- VLO_KTS ·
- 190
- VMC_KTS ·
- 90
- VMO_KTS ·
- 350
- VFE_KTS_10 ·
- 200
- VFE_KTS_20 ·
- 160
- VFE_KTS_40 ·
- 160
Weight & balance
- Max ramp weight (lb) ·
- 36500
- Min flight weight (lb) ·
- 23075
- Max landing weight (lb) ·
- 33000
- Max takeoff weight (lb) ·
- 36500
- Max zero fuel weight (lb) ·
- 28660
What is the A50NM Dassault Aviation Falcon 2000?
The A50NM Dassault Aviation Falcon 2000 is a pilot's operating handbook for the DASSAULT FALCON 2000, dated 1995.
Where does the A50NM Dassault Aviation Falcon 2000 come from?
This copy of the A50NM Dassault Aviation Falcon 2000 was originally published by ceoxaviation.com and is hosted on Sprinkle as a free, searchable reference copy.
What year was the A50NM Dassault Aviation Falcon 2000 published?
The A50NM Dassault Aviation Falcon 2000 — the DASSAULT FALCON 2000 pilot's operating handbook on file — is dated 1995.
Most owners only have the POH. Here's the essential set for the DASSAULT FALCON 2000.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
More DASSAULT FALCON 2000manuals & documents
- TECHNICAL SPECIFICATIONS 2016 FALCON 2000LXS S/N 321Systems Description
- FALCON SERVICE BULLETINService Bulletins
- FALCON SERVICE BULLETINService Bulletins
- Airplane Flight Manual Supplement for Dassault Aviation Falcon 2000EX Series Equipped with Aviation Partners, Inc. Blended WingletsPilot's Operating Handbook
- Dassault Falcon 2000Maintenance Manual
In this document
Engine Limits
Details the static and continuous thrust limits for the engines, as well as turbine interstage temperature limits and oil pressure specifications.
Airspeed Limits
Specifies various airspeed limits including VMO, MMO, VA, and VFE for different configurations.
Weight Limitations
Outlines maximum ramp, take-off, landing weights, and zero fuel weight for configurations with and without Option M57.
CG Range
Describes the center of gravity limits for different weights and configurations, including the effect of gear retraction.
Fuel and Oil Specifications
Lists the fuel and oil specifications required for the aircraft and its engines.
Certification Basis
Details the regulatory framework under which the Falcon 2000 is certified, including applicable FAR parts and amendments.
Safety notes
- Thrust reverser use is not approved unless specific changes are incorporated.
- Operation of the APU with passengers in the cabin without crew monitoring is not authorized.
- The aircraft must be loaded in accordance with the FALCON 2000 Loading Manual.
- Airframe components that are life-limited must be replaced as indicated in the Maintenance Manual.
- Engine life limits for critical components are published in the Engine Light Maintenance Manual.
Full document text
Page 1 2 3 4 5 6 7 Revision New New New New New New New DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION A50NM Dassault Aviation Falcon 2000 December 19, 1995 TYPE CERTIFICATE DATA SHEET No. A50NM This data sheet which is part of Type Certificate No. A50NM prescribes conditions and limitations under which the product for which the Type Certificate was issued meets the airworthiness requirements of the US Federal Aviation Regulations. Type Certificate Holder Dassault Aviation 9 rond Point des Champs Elysées 75008 PARIS FRANCE The U.S. airworthiness certification basis for aircraft type certificated under FAR Section 21.29 and exported by the country of manufacture is FAR Sections 21.183(c) or 21.185(c). The U.S. airworthiness certification basis for aircraft type certificated under FAR Section 21.29 exported from countries other than the country of manufacture (e.g. third party country) is FAR 21.183(d) or 21.185(b). Notwithstanding that the FAR referenced in the above paragraph does not specifically address or require a foreign civil airworthiness authority certification, such certification is the only practical way for an applicant to show, and the Federal Aviation Administration (FAA) to find conformity to the FAA-approved type design and conditions for safe operation. Additional guidance is contained in FAA Advisory Circular 21-23, Airworthiness Certification of Civil Aircraft, Engines, Propellers, and Related Products Imported into the United States. 1. Model FALCON 2000 (Transport Category Airplane) approved February 2, 1994 Engines 2 engines. CFE Company, Model CFE 738-1-1B (see NOTE 3b) Engine Limits Static, Standard, Sea Level Take-off (5 min) 5,725 lb (2,547 daN) Maximum Continuous 5,560 lb (2,474,daN) Maximum Steady State Rotor Speeds Low pressure rotor (N1) RPM 9,400 (96.7%) High pressure rotor (N2) 5 minutes RPM 28,000 (106%) Continuous RPM 27,709 (104.9%) A50NM 2 Engine Limits (cont’d) Turbine Interstage Temperature Limits Ground starting 815 °C Air starting 864 °C Maximum take-off (5 min) 877 °C Maximum take-off (2 min) 890 °C Maximum continuous 861 °C Airstart transient (10 sec) 890 °C Airstart transient (2 sec) 1000 °C Oil Temperature Maximum continuous 138 °C Minimum continuous 30 °C Maximum transient (3 min) 155 °C Fuel Pump Inlet Pressure Minimum 5 psi above true vapor pressure Maximum 50 psig Oil Pressure Idle 30-85 psig Normal operating range 60-85 psig Maximum transient (3 min) 100 psig (may be exceeded for 2.5 min. in case of a cold start (temp < 0 C)) Thrust Reversers Thrust reverser use is not approved, unless Dassault Aviation change M3B has been incorporated. APU Allied Signal Model GTCP36-150 (F2M) Limitation Maximum operating starting altitude 35,000 ft Maximum N1 (%) 110 Exhaust gas temperature, Steady 746 °C Exhaust gas temperature, Starting 974 °C Maximum oil temperature 163 °C Minimum oil pressure 35 psi Operation of the APU with passengers in the cabin and without crew member monitoring is not authorized. Airspeed Limits Unless otherwise stated, speeds are indicated airspeeds VMO (Maximum Operating) 350 kt at sea level, 370 kt at 10,000 ft with straight line variation between those points. 370 kt from 10,000 to 25,000 ft MMO (Maximum Operating) M = 0.862 from 25,000 to 38,000 ft 0.862 at 38,000 ft, 0.85 at 42,000 ft with straight line variation between those points 0.85 above 42,000 ft 3 A50NM Airspeed Limits (cont’d) VA (Maneuvering) 198 kt VFE (Slat and Flap Speeds) Slats + Flaps 10° 200 kt Slats + Flaps 20° 160 kt Slats + Flaps 40° 160 kt VLO (Landing Gear Operation) 190 kt MLO 0.70 VLE (Landing Gear Extended) 245 kt MLE 0.75 VMC (Minimum Control Speed) Flight 90 kt Windshield Wiper Operation 215 kt Direct Vision Window 215 kt CG Range (Gear Extended) a. Without Option M57 Weight (lb) Forward Limit (% MAC) Rearward Limit (% MAC) 36,000 16.7 26.2 33,000 14 - 28,660 or less 14 32.5 b. With Option M57 Weight (lb) Forward Limit (% MAC) Rearward Limit (% MAC) 36,500 17.2 25.8 33,000 14 - 28,660 or less 14 32.5 Straight line variation between points. Gear retraction has negligible effect on CG range. Datum Datum is 25% of mean aerodynamic chord (MAC) which coincides with fuselage station FS + 400.43 in (Fuselage station reference +0 is the foward end of the airplane nose cone). Mean Aerodynamic chord (MAC) Length 113.69 in Zero percent MAC is at FS +372.01 in Leveling Means Standard bubble type level to be installed on the passenger seat tracks A50NM 4 Weight Limitations Without Option M57 With Option M57 Maximum ramp 36,000 lb 36,500 lb Maximum take-off 35,800 lb 36,500 lb Maximum landing 33,000 lb 33,000 lb Maximum zero fuel 28,660 lb 28,660 lb Minimum flight at 14% CG 23,075 lb 23,075 lb at 32.5% CG 20,100 lb 20,100 lb Minimum Crew 2 - Pilot and copilot Maximum Passenger Seats 19 - limited by emergency exit requirements of Federal Aviation Regulations § 25.807(c) Maximum Baggage Baggage compartment 1,600 lb (not to exceed 61.4 lb per sq ft) Fuel Capacity Nominal - Refer to weight and balance report of each airplane for exact capacity Refer to NOTE 1(b) for data on unusable system fuel and oil Usable Fuel US Gallons Pounds Arm (in) LH outboard wing 348.4 2,334 22.64 LH inboard wing 213.7 1,432 -27.68 LH center wing box 216.9 1,453 -37.76 LH Feeder tank 127 851 -16.34 RH outboard 349.2 2,340 22.64 RH inboard wing 214.1 1,435 -27.68 RH center wing box 217.4 1,457 -37.76 RH feeder tank 127.3 853 -57.87 Total Usable 1,814.0 12,155 Total Fuel 1830.3 12,259 Pressure Fueling Maximum 50 psi Oil Capacity Refer to NOTE 1(b) for data on unusable system fuel and oil (each engine) Usable 0.55 US gallon Total 1.25 US gallon Maximum Operating Altitude 47,000 ft Control Surface Movements Elevator Down 16° Up 20° Rudder Right 29° Left 29° Aileron Up 25°20´ Down 24°50´ Flaps Down 40° Airbrakes Inboard up 68° Center up 50° Outboards up 37° Wing slats Down 30° Stabilizer Electrical stops AND 2° ANU 10° Mechanical stops AND Max 2°30´ ANU Max 10°30´
Show full textShow less
Structural stops AND Min 2°40´ ANU Min 11° Rigging tolerances are included in Maintenance Manual 5 A50NM Data Pertinent to all Models Fuels Fuels conforming to General Electric specification No. D50TF2, current revision See NOTE 4 The above mentioned fuels and additives are also suitable for the APU Oils Oil conforming to General Electric Specification No. D50TR1, or Allied Signal oil Specification EMS 53110, current revision See NOTE 5 Manufacturer Serial Number Eligible A French "Certificat de Navigabilité pour Exportation" endorsed as noted under "Import Requirements" must be submitted for each individual aircraft for which application for US certification is made. Import Requirements An FAA standard Airworthiness Certificate may be issued on the basis of a French "Certificat de Navigabilité pour Exportation" signed by representative of the Direction Générale de l'Aviation Civile (DGAC) of France, containing the following statement: "The airplane covered by this certificate has been examined, tested and found to conform to the type design approved under Type Certificate No. A50NM, and to be in a condition for safe operation." Certification Basis (FALCON 2000) 1. FAR, Part 25 as amended by Amendment 25-1 through 25-69. In addition, Dassault Aviation has elected to comply with amendments 25-71 for § 25.365(e), 25-72 for §§ 25.783(g) and 25.177; 25-75 for § 25.729(e); 25-79 for § 25.811(e)(2) and 25-80 for § 25.1316 2. FAR Part 34, original issue (Fuel Venting and Exhaust Emissions) 3. FAA, Part 36 as amended by amendment 36-1 through 36-20 4. FAA, Special Conditions: 25-ANM-90 - High Altitude Operation 25-ANM-91 - High -Intensity Radiated Fields 25-ANM-94 - Automatic Takeoff Thrust Control System 5. FAA Exemption No. 5991 (for side facing sofa) For precision approach and landings, the applicable technical requirements are complemented by FAA Advisory Circulars (AC) 120-29 and AC 120-28(c) For the automatic flight control system, the applicable technical requirements are complemented by AC 25.1329-1A for cruise. Equivalent safety findings exist with respect to the following requirements: • Design gust criteria, (refer to Issue Paper (IP) A-5) • Use of the 1-g stall speeds instead of minimum speed in the stall as a basis for determining compliance (refer to IP F-1) • Rejected take-off and landing performance (refer to IP F-3) • N2 Digital Indication (refer to IP P-10) • Flight Critical Thrust Reverser Certification (refer to IP P-7) A50NM 6 Compliance has been shown to the following optional requirement: • Ditching, FAR § 25.801 • Ice Protection FAR § 25.1419 Type Certificate A50NM issued February 2, 1995 Reference date for type certification: November 30, 1989 Equipment The basic required equipment as prescribed in the applicable airworthiness regulations (see certification basis) must be installed on the aircraft for certification. The lists of all equipment as well as optional equipment approved by Direction Générale de l'Aviation Civile (DGAC) of France are contained in the documents: • DTM 38-2000/90 (01-940) - Equipment list of the basic airplane • DTM 38-0735/91 (01-941) - Equipment list of the standard option and other options In addition, the aircraft must be operated in accordance with the DGAC approved FALCON 2000 Airplane Flight Manual, document DTM 537 approved February 2, 1995 Service Information Service bulletins and repair instructions (bulletins, letters, etc), structural repair manuals, aircraft flight manuals, overhaul manuals and maintenance manuals, published in the English language, that indicate applicability to the U.S. approved Model Falcon 2000 type design and that contain a statement that the document is "Approved by DGAC.", are accepted by the FAA and are considered FAA approved. These approvals pertain to the type design only. All Mandatory Service bulletins will be have an authorized signature of the DGAC approval authority. Other available service documents include: Structural Repair Manual Illustrated Parts Catalog Wiring Diagram Manual Maintenance Manual NOTES NOTE 1 - Weight and Balance (a) Current weight and balance report including a list of equipment included in certificated empty weight, and loading instructions when necessary must be provided for each aircraft at its delivery. (b) The following must be included in the airplane empty weight: • The total unusable fuel, 109 lb, list as follows, plus • The unusable engine oil, 4.1 US gallons, 34 lb, (drainable and trapped oil) at arm + 150 in, and • The hydraulic fluid 83 lb at are + 127 in Unusable Fuel US Gallons Pounds Arm (in) Drainable 5.3 35 -37 Trapped (tanks and lines) 11 74 +14 Total unusable fuel 16.3 109 (c) The airplane must be loaded in accordance with the FALCON 20000 Loading Manual (DTM 541) and the CG must be within the specified limits at all times. 7 A50NM NOTE 2 - Reserved NOTE 3 - Service Life Limits and required Maintenance/Inspections (a) Airframe components which are life limited, and associated retirement times, are presented in DGAC approved chapter 5.40.00 of the FALCON 2000 Maintenance Manual, and must be replaced as indicated therein. (b) Engine life limits, established for critical rotating components, are published in the approved Engine Light Maintenance Manual, Report Number 72.08.03, Airworthiness Limitation Section. (c) Required maintenance and inspections to maintain airworthiness based on involving reliability are presented in DGAC approved chapter 5.40.00 of the FALCON 2000 Maintenance Manual. NOTE 4 - Fuel Specifications and Additives (a) For information concerning equivalent fuel specifications, see Airplane Flight Manual (b) Additives For the CFE 738 engines and GTCP 36-150 auxiliary power unit, the following additive limitations are approved. • Anti-icing additives, conforming to AIR 3652 of MIL-I 27686 D or E (JP-4/JP-8) or to MIL-I 85470 (JP-5) or equivalent are approved for use in the fuel in amounts up to 0.15 per cent by volume. • SOHIO BIOBOR JF biocide additive, or equivalent, is approved for use in fuel at a concentration not exceeding 270 PPM • Anti-static additive is approved for use in fuel at a concentration not exceeding 1 PPM for SHELL ASA 3 and 3 PPM for STADIS 450 NOTE 5 - Qualified Oils (a) Engine: See CFE 738 Engine Installation Manual IM 75 550 for specific oils approved per the subject specification. (b) APU: Brand names of oils approved for use in the APU are listed in the GTCP36-150 Maintenance Manual ......END.....