HINGED DOOR FLOOR PROTECTION, KIT INSTRUCTIONS FOR CONTINUING AIRWORTHINESS
EUROCOPTER AS350BA · Maintenance Manual
Overview
This document provides maintenance instructions for the Hinged Door Floor Protection Kit designed for the Eurocopter AS350 aircraft. It includes installation and removal instructions, maintenance guidelines, and airworthiness limitations.
- The kit protects the aircraft floor from dents and punctures.
- Installation requires access to the cabin floor and removal of existing components.
- Scheduled inspections include daily and 150-hour/12-month checks.
- Repairs to the kit are not permitted; contact Alpine Aerotech for issues.
- The kit adds a total weight of 15.23 lbs to the aircraft.
- No airworthiness limitations are associated with this kit.
- Refer to the Eurocopter AS350 Master Service Manual for additional maintenance instructions.
- The document is revision C, dated August 6, 2024.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
Document
Source
Copy found at alpineaerotech.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Maintenance Manual
- Year ·
- 2024
- File size ·
- 1.3 MB
- Copy found at ·
- alpineaerotech.com
- Language ·
- en
Specifications & performance
Extracted from this document.
Specifications
- Weight (lb) ·
- 15.23
- Lateral arm (in) ·
- .061
- Longitudinal arm (in) ·
- 69.622
Weight & balance
- Lateral arm m ·
- .002
- Total weight (lb) ·
- 15.23
- Longitudinal arm m ·
- 1.768
What is the HINGED DOOR FLOOR PROTECTION, KIT INSTRUCTIONS FOR CONTINUING AIRWORTHINESS?
The HINGED DOOR FLOOR PROTECTION, KIT INSTRUCTIONS FOR CONTINUING AIRWORTHINESS is a maintenance manual for the EUROCOPTER AS350BA, dated 2024.
What year was the HINGED DOOR FLOOR PROTECTION, KIT INSTRUCTIONS FOR CONTINUING AIRWORTHINESS published?
The HINGED DOOR FLOOR PROTECTION, KIT INSTRUCTIONS FOR CONTINUING AIRWORTHINESS — the EUROCOPTER AS350BA maintenance manual on file — is dated 2024.
Common. More common than 99% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the EUROCOPTER AS350BA.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
EUROCOPTER AS350BA for sale now
Free — save the 350 to your watchlist and track it in one place.
More EUROCOPTER AS350BAmanuals & documents
Related documents
- LHS SLIDING DOOR FLOOR PROTECTION, KITEUROCOPTER AS350B-2 · Maintenance Manual
- 505 Crew Headset, Hanger Instructions for Continuing AirworthinessBELL 505 · Maintenance Manual
- PARTS MANUAL 4000 FLOATS ON CESSNA 185 & 206 SERIESCESSNA 185 · Avionics Manual
- Sportstar Plus SL and Max Parts CatalogueEVEKTOR EV-97 Eurostar SL · Parts Catalog
- RV-12iS PARTS INDEXVANS RV-12IS · Parts Catalog
If you fly the EUROCOPTER AS350BA, you may also be researching these.
In this document
Description
The Hinged Door Floor Protection Kit consists of rigid materials installed on the aircraft floor to prevent damage during loading and unloading operations.
Maintenance Manual Supplement
This section outlines the continuing airworthiness instructions, repair allowances, and airworthiness limitations for the kit.
Installation & Removal Instructions
Detailed steps for installing and removing the Hinged Door Floor Protection Kit, including necessary preparations and tools.
Inspection Procedures
Guidelines for conducting daily and periodic inspections to ensure the integrity and security of the installed kit.
Repair Procedures
Repairs to the kit are not allowed; users must contact Alpine Aerotech for further assistance.
Weight & Balance
The kit adds a weight of 15.23 lbs to the aircraft, with specified longitudinal and lateral arms.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Safety notes
- Perform daily inspections prior to flight operations.
- If damage is detected, conduct a 150-hour/12-month inspection.
- Ensure proper security and integrity of the kit during inspections.
- Repairs to the kit are not permitted; contact Alpine Aerotech for issues.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Full document text
ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 1 of 23 HINGED DOOR FLOOR PROTECTION, KIT INSTRUCTIONS FOR CONTINUING AIRWORTHINESS MODELS: EUROCOPTER AS350* *With AFT LHS RHS hinged doors installed Read all of the Instructions for Continuing Airworthiness thoroughly prior to performing any activities relating to this product ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 2 of 23 Table of Contents Section Description Page 1 Description 2 2 Maintenance Manual Supplement 3 3 Installation & Removal Instructions 8 Installation Instructions 9 Removal Instructions 16 4 Illustrated Parts Breakdown 17 Notes 1. If changes to this document are required, Alpine Aerotech LP shall revise all pages and reissue the entire document. 2. Alpine Aerotech LP shall make any subsequent revisions of this document available free of charge upon request. Alpine Aerotech LP also recommends that the end user of this product periodically verify the revision level of this document. Section 1: Description Description The following information provides a functional description of the Hinged Door Floor Protection, Kit as defined in Alpine Aerotech LP authority dataset AAL-312-020-001. • The Floor Protection, Kits are rigid pieces of material that are installed atop the existing floor to protect it from dents and punctures associated with typical aircraft usage. This occurs most frequently during loading and unloading operations, but can also occur during small inflight shifts of said cargo. • The Hinged Door Floor Protection, Kit when installed, adds additional protection to the floor panels, as it is manufactured from a material specifically designed to spread and attenuate energy. ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 3 of 23 Section 2: Maintenance Manual Supplement General Notes 1. The following information defines the instructions for continuing airworthiness, repair allowances and airworthiness limitations for the item(s) referenced within this document. 2. Refer to the current revisions of the Eurocopter AS350 Master Service Manual for Instructions for Maintenance/Inspection with respect to the item(s) referenced within this document. 3. Refer to the Section 3: Installation & Removal Instructions and Section 4: Illustrated Parts Breakdown for the replacement and/or installation of the item(s) referenced within this section. 4. Scheduled inspection for the item(s) referenced within this document shall be accomplished in accordance with (IAW) the Inspection Procedures specified. 5. Repair allowances for the item(s) referenced within this document shall be accomplished IAW the Repair Procedures specified. 6. Limitations for the item(s) referenced within this document are IAW the Airworthiness Limitations specified. ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 4 of 23 The Airworthiness Limitations section is approved by the Minister and specifies maintenance required by any applicable airworthiness or operating rule unless an alternative program has been approved by the Minister. The Airworthiness Limitations section is FAA approved and specifies maintenance required under Sections 43.16 and 91.403 of the Federal Aviation Regulations unless an alternative program has been FAA approved. Airworthiness Limitations Supplement to applicable Maintenance Manual, Chapter 4, Airworthiness Limitations Schedule Notes 1. Refer to the applicable Master Service Manual, Chapters, for general information on airworthiness limitations and airworthiness limitation schedules. 2. Item(s) not listed in the Scheduled Airworthiness Limitations section within this document have an unlimited airworthiness life. Scheduled Airworthiness Limitations 1. There are no airworthiness limitations associated with the item(s) referenced within this document. ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 5 of 23 Inspection Procedures Supplement to applicable Maintenance Manual, Chapter 5, Inspection and Component Overhaul Schedule Notes 1. Refer to the applicable Master Service Manual, Breakdown of the MSM Section 7, for general information on inspections, inspection definitions, inspection intervals, inspection methods and inspection schedules. 2. General Inspections, as indicated within this document, are defined as visual, non-thorough checks. 3. Detailed Inspections, as indicated within this document, are defined as visual and thorough, searching checks. 4. Perform Daily Inspections every day, prior to flight operation. If damage is detected, perform the 150 Hour/12 Month Inspections. 5. Perform 150 Hour/12 Month Inspections every 150 hours or every 12 months, whichever occurs first, prior to flight operation. If damage is detected, refer to the Repair Procedures section within this document. Scheduled Inspections 1. Daily Inspections Data Reference: Section 3: Installation and Removal Instructions Section 4: Illustrated Parts Breakdown i. Perform a General Inspection on the Hinged Door Floor Protection, Kit, Installation for general condition. ii. Perform a General Inspection on the Hinged Door Floor Protection, Kit, Installation for
Show full textShow less
proper security. ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 6 of 23 Scheduled Inspections 2. 150 Hour/12 Month Inspections Data Reference: Section 3: Installation and Removal Instructions Section 4: Illustrated Parts Breakdown I. Perform a Detailed Inspection on all items to ensure proper security. II. Perform a Detailed Inspection on all items/materials to ensure proper integrity. III. Perform a Detailed Inspection on the Hinged Door Floor Protection, Kit to ensure that it is not delaminating. IV. Perform a Detailed Inspection on all surfaces & locations with Velcro applied to ensure no damage has occurred to the aircraft floor. ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 7 of 23 Repair Procedures 1. Repairs to the item(s) referenced within this document are not permitted. Contact Alpine Aerotech LP for further information if repairs are required to the item(s) referenced within this document. ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 8 of 23 Section 3: Installation & Removal Instructions Weight & Balance Part Number Description Weight Long. Arm Lat. Arm AAL-312-020-001 Hinged Door Floor Protection, Kit 15.23* 69.622 .061 LBL 6.906 (Kg) 1.768 (m) .002 (m) * Total increase in weight to aircraft. General Notes 1. All Installation Instructions shall be accomplished IAW standard aircraft practices. Refer to the current revision of the FAA publications AC 43.13-1B and AC 43.13-2B for details on standard aircraft practices. 2. All Dimensions are in imperial measures (inches/pounds). 3. Refer to Section 2: Maintenance Manual Supplement for instructions on maintenance for the item(s) referenced within this section. 4. Refer to the Section 4: Illustrated Parts Breakdown for the part numbers of the item(s) referenced within this section. Alternate Part: DIN965-M4 x 16 Alternate Part: DIN7985-M4 x 18 1 2 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 9 of 23 Installation Instructions 1. Gain access to the cabin floor, temporarily remove all seats, LHS collective, & foot pedals. Remove any existing floor board protection kits, door sills and door sill fasteners. Reference Figure 1. Figure 1 Some Items Removed for Clarity CABIN FLOOR REF VIEW ORIENTATION INSTALLATION SHOWN OUTBD FWD UP ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 10 of 23 Installation Instructions 2. Pre-fit the FWD LHS Hinged Door Floor Protection, Assy (Item 1), FWD RHS Hinged Door Floor Protection, Assy (Item 13), & AFT Hinged Door Floor Protection, Assy (Item 23) by lining up the outboard edge of the panel, assy with the existing floor panel edge. Reference Figure 2. Note: Ensure clearance around cutout features, cyclic, collective, & pedals etc. 3. With the panel lined up use the pre-cut Ø.25 holes and a felt pen to mark out the locations for the Velcro, Details (Items 9, 10, 11, 12, 20, 21, 22, 29, & 30) and remove the panels (Items 1, 13, & 23). Reference Figure 2 & 3. Figure 2 Some Items Removed for Clarity 1 Ø.25 HOLES 8X Ø.25 HOLES 4X Ø.25 HOLES 4X 13 23 Ø.25 HOLES 4X Ø.25 HOLES 4X Ø.25 HOLES 4X Ø.25 HOLES 4X Ø.25 HOLES 8X Ø.25 HOLES 4X Ø.25 HOLES 4X VIEW ORIENTATION INSTALLATION SHOWN OUTBD FWD UP ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 11 of 23 Installation Instructions 4. Clean the areas between the felt pen marks with alcohol taking care not to wipe away the felt pen marks. 5. Individually separate each Velcro, Detail (Items 9, 10, 11, & 12) off of the FWD LHS Hinged Door Floor Protection, Assy (Item 1), Velcro, Detail (Items 20, 21, & 22) off of the FWD RHS Hinged Door Floor Protection, Assy (Item 13), & Velcro, Detail (Items 29 & 30) off the AFT Hinged Door Floor Protection, Assy (Item 23), peel adhesive backing from the Velcro, Details (Items 9, 10, 11, 12, 20, 21, 22, 29, & 30). 6. Using the felt pen marks as reference points, apply the Velcro, Details (Items 9, 10, 11, 12, 20, 21, 22, 29, & 30) to the floor protection panel in their respective locations. Reference Figure 3. Apply adequate pressure to ensure a secure bond. Figure 3 Some Items Removed for Clarity 9 21 20 22 21 30 29 10 11 12 VIEW ORIENTATION INSTALLATION SHOWN OUTBD FWD UP ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 12 of 23 Installation Instructions 7. Re-install the FWD LHS Hinged Door Floor Protection, Assy (Item 1), FWD RHS Hinged Door Floor Protection, Assy (Item 13), & AFT Hinged Door Floor Protection, Assy (Item 23) onto Velcro strips. Reference Figures 2 & 3. 8. If required, use a sharp utility knife to remove the knock-out rectangles for FWD seats to fit your pilot and co-pilot seat configuration. Be careful not to score the aircraft floor panel with the knife. Reference Figure 4. 9. If required, use a sharp utility knife to remove EITHER the FWD or AFT set of knock-out rectangles to allow the AFT seats to be properly fastened. Be careful not to score the aircraft floor panel with the knife. Reference Figure 4. Figure 4 Some Items Removed for Clarity VIEW ORIENTATION INSTALLATION SHOWN INBD FWD UP 13 23 1 KNOCK-OUT RECTANGLES FOR AFT SEATS REF KNOCK-OUT RECTANGLES FOR FWD SEATS REF ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 13 of 23 Installation Instructions 10. Install Door Sill, Details (Items 31 & 32) as shown. Reference Figure 5. Figure 5 LHS Shown RHS Opposite Some Items Removed for Clarity VIEW ORIENTATION INSTALLATION SHOWN INBD FWD UP 31 32 OPP ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 14 of 23 Installation Instructions 11. Install fasteners as shown. Reference Figure 6. Figure 6 LHS Shown RHS Opposite Some Items Removed for Clarity 33 34 31 23 VIEW ORIENTATION INSTALLATION SHOWN INBD FWD UP 2 1 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 15 of 23 Installation Instructions 12. Suggested Grip Tape (Item 35), installation shown. Figure 7 Suggested Grip Tape (Item 35) Installation Shown Some Items Removed for Clarity 13. Installation complete 14. Perform a General Inspection of all items to ensure proper installation. 15. Update the aircraft logbook for the installation of Hinged Door Floor Protection, Kit. VIEW ORIENTATION INSTALLATION SHOWN OUTBD FWD UP 35 35 35 35 35 35 35 35 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 16 of 23 Removal Instructions 1. For the removal the Hinged Door Floor Protection, Kit for either inspections, or mission configuration, the removal of the Hinged Door Floor Protection, Kit can be considered the opposite of installation for step 7, 8 & 9. For permanent removal, of Hinged Door Floor Protection, Kit remove all bonded Velcro, Details. 2. Perform a General Inspection of all items to ensure proper removal. 3. Update the aircraft logbook for the removal of the Hinged Door Floor Protection, Kit. ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 17 of 23 Section 4: Illustrated Parts Breakdown FWD LHS Hinged Door Floor Protection, Assy Shown Item 1 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 18 of 23 FWD RHS Hinged Door Floor Protection, Assy Shown Item 13 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 19 of 23 AFT Hinged Door Floor Protection, Assy Shown Item 23 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 20 of 23 Door Sill, Detail Shown Item 31 Door Sill, Detail Shown Item 32 Screw Machine Shown Item 33 Pan Head Phillips, Machine Screw Shown Item 34 Grip Tape Shown Item 35 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 21 of 23 ITEM QTY NUMBER DESCRIPTION MATERIAL REF STOCK SIZE SPEC FINISH MANUFACTURER NCAGEC - - AAL-312-020-001 HINGED DOOR FLOOR PROTECTION, KIT C/O SHADED ITEMS ONLY 1 1 AAL-312-021-011 FWD LHS HINGED DOOR FLOOR PROTECTION, ASSY NA NA NA NA ALPINE AEROTECH LP L0171 2 1 AAL-312-021-001 FWD LHS HINGED DOOR FLOOR PROTECTION, ASSY NA NA NA NA ALPINE AEROTECH LP L0171 3 1 AAL-312-022-001 FWD LHS HINGED DOOR FLOOR PROTECTION, DETAIL P2C W/TUFFCOAT B/SIDES 0.1 SEE MFR SEE MFR ALPINE AEROTECH LP L0171 4 1 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 12.00 SEE MFR SEE MFR VELCRO USA INC. 11153 5 1 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 9.00 SEE MFR SEE MFR VELCRO USA INC. 11153 6 2 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 15.00 SEE MFR SEE MFR VELCRO USA INC. 11153 7 1 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 x 5.00 SEE MFR SEE MFR VELCRO USA INC. 11153 8 1 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 3.125 SEE MFR SEE MFR VELCRO USA INC. 11153 9 1 151405 VELCRO, DETAIL HOOK 88, BLACK 8289 PSA 2 x 12.00 SEE MFR SEE MFR VELCRO USA INC. 11153 10 1 151405 VELCRO, DETAIL HOOK 88, BLACK 8224 PSA 2 X 9.00 SEE MFR SEE MFR VELCRO USA INC. 11153 11 1 151405 VELCRO, DETAIL HOOK 88, BLACK 8289 PSA 2 x 5.00 SEE MFR SEE MFR VELCRO USA INC. 11153 12 1 151405 VELCRO, DETAIL HOOK 88, BLACK 8289 PSA 2 X 3.125 SEE MFR SEE MFR VELCRO USA INC. 11153 13 1 AAL-312-021-012 FWD RHS HINGED DOOR FLOOR PROTECTION, ASSY NA NA NA NA ALPINE AEROTECH LP L0171 14 1 AAL-312-021-002 FWD RHS HINGED DOOR FLOOR PROTECTION, ASSY NA NA NA NA ALPINE AEROTECH LP L0171 15 1 AAL-312-022-002 FWD RHS HINGED DOOR FLOOR PROTECTION, DETAIL P2C /TUFFCOAT B/SIDES 0.1 SEE MFR SEE MFR ALPINE AEROTECH LP L0171 16 2 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 15.00 SEE MFR SEE MFR VELCRO USA INC. 11153 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 22 of 23 ITEM QTY NUMBER DESCRIPTION MATERIAL REF STOCK SIZE SPEC FINISH MANUFACTURER NCAGEC 17 1 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 12.00 SEE MFR SEE MFR VELCRO USA INC. 11153 18 4 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 x 5.00 SEE MFR SEE MFR VELCRO USA INC. 11153 19 1 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 3.125 SEE MFR SEE MFR VELCRO USA INC. 11153 20 1 151405 VELCRO, DETAIL HOOK 88, BLACK 8289 PSA 2 x 12.00 SEE MFR SEE MFR VELCRO USA INC. 11153 21 4 151405 VELCRO, DETAIL HOOK 88, BLACK 8289 PSA 2 x 5.00 SEE MFR SEE MFR VELCRO USA INC. 11153 22 1 151405 VELCRO, DETAIL HOOK 88, BLACK 8289 PSA 2 X 3.125 SEE MFR SEE MFR VELCRO USA INC. 11153 23 1 AAL-312-021-017 AFT HINGED DOOR FLOOR PROTECTION, ASSY NA NA NA NA ALPINE AEROTECH LP L0171 24 1 AAL-312-021-003 AFT HINGED DOOR FLOOR PROTECTION, ASSY NA NA NA NA ALPINE AEROTECH LP L0171 25 1 AAL-312-022-003 AFT HINGED DOOR FLOOR PROTECTION, DETAIL P2C W/TUFFCOAT B/SIDES 0.1 SEE MFR SEE MFR ALPINE AEROTECH LP L0171 26 4 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 26.00 SEE MFR SEE MFR VELCRO USA INC. 11153 27 1 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 31.066 SEE MFR SEE MFR VELCRO USA INC. 11153 28 2 151394 VELCRO, DETAIL LOOP 1000, BLACK, 8224 PSA 2 X 9.00 SEE MFR SEE MFR VELCRO USA INC. 11153 29 2 151405 VELCRO, DETAIL HOOK 88, BLACK 8224 PSA 2 X 9.00 SEE MFR SEE MFR VELCRO USA INC. 11153 30 1 151405 VELCRO, DETAIL HOOK 88, BLACK 8289 PSA 2 X 31.066 SEE MFR SEE MFR VELCRO USA INC. 11153 31 1 AAL-312-022-011 DOOR SILL, DETAIL 301 1/4 HARD 0.025 AMS 5517 SEE SPEC ALPINE AEROTECH LP L0171 32 1 AAL-312-022-012 DOOR SILL, DETAIL 301 1/4 HARD 0.025 AMS 5517 SEE SPEC ALPINE AEROTECH LP L0171 ALPINE AEROTECH LP www.alpineaerotech.com 1260 Industrial Road, Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 admin@alpineaerotech.com Revision: C Date: 2024-08-06 Doc. No.: AAL-312-035-701 Page 23 of 23 ITEM QTY NUMBER DESCRIPTION MATERIAL REF STOCK SIZE SPEC FINISH MANUFACTURER NCAGEC 33 24 ISO 7046-1-M4 x 16 SCREW, MACHINE SEE SPEC SEE SPEC ISO 7046-1 SEE SPEC SOURCE AS REQUIRED NA 34 4 ISO 7045-M4 x 18 PAN HEAD PHILLIPS, MACHINE SCREW SEE SPEC SEE SPEC ISO 7045 SEE SPEC SOURCE AS REQUIRED NA 35 1 3M SAFETY-WALK SLIP-RESISTANT GENERAL PURPOSE TAPES AND TREADS 620, CLEAR 4in - 70070975621 SAFETY-WALK GENERAL PURPOSE GRIP TAPE POLY-URETHANE 208.00" NA NFSI SCOF < 0.60 3M NA 1 2