505 Crew Headset, Hanger Instructions for Continuing Airworthiness

Full document text

www.alpineaerotech.com 1260 Industrial Road, West Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 sales@alpineaerotech.com Revision: A Date: 2022-08-05 Doc. No.: AAL-391-035-701 Page 1 of 10 505 CREW HEADSET, HANGER INSTRUCTIONS FOR CONTINUING AIRWORTHINESS MODELS: 505 Read all of the Instructions for Continuing Airworthiness thoroughly prior to performing any activities relating to this product www.alpineaerotech.com 1260 Industrial Road, West Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 sales@alpineaerotech.com Revision: A Date: 2022-08-05 Doc. No.: AAL-391-035-701 Page 2 of 10 Table of Contents Section Description Page 1 Introduction 2 Applicability 2 2 Description 3 3 Operation 3 4 Maintenance Instructions 4 5 Repair Procedures 6 6 Removal/Replacement 6 6.1 Removal Instructions 6 6.2 Replacement Instructions 7 7 General 7 8 Airworthiness Limitations 7 9 Illustrated Parts Breakdown 8 Notes 1. If changes to this document are required, Alpine Aerotech LP shall revise all pages and reissue the entire document. 2. Alpine Aerotech LP shall make any subsequent revisions of this document available free of charge upon request. Alpine Aerotech LP also recommends that the end user of this product periodically verify the revision level of this document. SECTION 1: INTRODUCTION This document comprises Instructions for Continuing Airworthiness that apply to the 505 Crew Headset, Hanger. Applicability The 505 Crew Headset, Hanger is applicable to all Bell 505. www.alpineaerotech.com 1260 Industrial Road, West Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 sales@alpineaerotech.com Revision: A Date: 2022-08-05 Doc. No.: AAL-391-035-701 Page 3 of 10 SECTION 2: DESCRIPTION The following information provides a functional description of the 505 Crew Headset, Hanger as defined in Alpine Aerotech LP datasets AAL-391-034-001. • The 505 Crew Headset, Hanger is designed to be mounted in a location easily accessible to crew and passengers sitting in the pilot and co-pilots position. • They allow for the stowage and organization of crew and passenger headset units. SECTION 3: OPERATION 1. If a headset is stowed during flight, the retention system should be engaged. www.alpineaerotech.com 1260 Industrial Road, West Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 sales@alpineaerotech.com Revision: A Date: 2022-08-05 Doc. No.: AAL-391-035-701 Page 4 of 10 SECTION 4: MAINTENANCE INSTRUCTIONS General Notes 1. The following information defines the instructions for continuing airworthiness, repair allowances and airworthiness limitations for the item(s) referenced within this document. 2. Refer to the current revisions of the Aircraft Maintenance Manual for Instructions for Maintenance/Inspection with respect to the item(s) referenced within this document. 3. Refer to the Section 6: Removal/Replacement Instructions and Section 9: Illustrated Parts Breakdown for the replacement and/or installation of the item(s) referenced within this document. 4. Scheduled inspections for the item(s) referenced within this document shall be accomplished in accordance with (IAW) the Inspection Procedures specified. 5. Repair allowances for the item(s) referenced within this document shall be accomplished IAW the Repair Procedures specified. 6. Limitations for the item(s) referenced within this document are IAW the Airworthiness Limitations specified. www.alpineaerotech.com 1260 Industrial Road, West Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 sales@alpineaerotech.com Revision: A Date: 2022-08-05 Doc. No.: AAL-391-035-701 Page 5 of 10 Inspection Procedures Supplement to applicable Maintenance Manual, Chapter 5, Inspection and Component Overhaul Schedule Notes 1. Refer to the applicable Maintenance Manual, Chapter 4, for general information on inspections, inspection definitions, inspection intervals, inspection methods and inspection schedules. 2. General Inspections, as indicated within this document, are defined as visual, non-thorough checks. 3. Detailed Inspections, as indicated within this document, are defined as visual and thorough, searching checks. 4. Perform 600 Hour/12 Month Inspections every 600 hours or every 12 months, whichever occurs first, prior to flight operation. If damage is detected, refer to the Repair Procedures section within this document. Scheduled Inspections 1. 600 Hour/12 Month Inspections Data Reference: Section 3: Installation and Removal Instructions Section 4: Illustrated Parts Breakdown I. Perform a Detailed Inspection on all items to ensure proper security. II. Perform a Detailed Inspection on all items/materials to ensure proper integrity. SECTION 5: Repair Procedures 1. Repairs to all other item(s) referenced within this document are not permitted. Contact Alpine Aerotech LP for further information if repairs are required to all other item(s) referenced within this document. www.alpineaerotech.com 1260 Industrial Road, West Kelowna, B.C., Canada V1Z 1G5 Phone: (250) 769-6344 Fax: (250) 769-6303 sales@alpineaerotech.com Revision: A Date: 2022-08-05 Doc. No.: AAL-391-035-701 Page 6 of 10 SECTION 6: REMOVAL/REPLACEMENT General Notes 1. All Installation Instructions shall be accomplished IAW standard aircraft practices. Refer to the current revision of the FAA publications AC 43.13-1B and AC 43.13-2B for details on standard aircraft practices. 2. All Dimensions are in imperial measures (inches/pounds). 3. Refer to Section 4: Maintenance Instructions for instructions on maintenance for the item(s) referenced within this section. 4. Refer to the Section 9: Illustrated Parts Breakdown for the part numbers of the item(s) referenced within this section. 6.1 REMOVAL INSTRUCTIONS 505 CREW HEADSET, HANGER 1. Gain access to the aircraft and make ready for maintenance. Gain access to the headset hanger.