Skip to main content

Lake LA-4-200

LAKE LA 4/200 · Pilot's Operating Handbook

Free account — keep the POHs & checklists you reference in one place.

Overview

This document provides information about the advantages and specifications of the MTV-12-B/LD188-119a propeller for the Lake LA-4-200 aircraft. It includes details on the STC kit contents, propeller design, and performance characteristics.

  • Best vibration damping characteristics for propeller operations
  • Shorter take-off distance by approximately 5%
  • Unlimited blade life
  • Significant noise reductions
  • Includes a 3-blade constant speed propeller
  • Propeller weight is 63 lbs
  • Maximum diameter of the propeller is 74 inches
  • TBO is 1800 hours or 72 months

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

Document

Source

Copy found at mcfarlaneaviation.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

Report a problem or request removal

Document details

Type
·
Pilot's Operating Handbook
File size
·
282 KB
Copy found at
·
mcfarlaneaviation.com
Language
·
en

Specifications & performance

Extracted from this document.

Specifications

Maximum diameter (in)
·
74
Minimum diameter (in)
·
74
Installed propeller weight (lb)
·
63

Performance

Tbo hours
·
1800
Tbo months
·
72
How rare is it?
433LAKE LA 4/200 registered worldwide · 424 active

Common. More common than 91% of the aircraft models we track.

Documentation completeness
4/7

Most owners only have the POH. Here's the essential set for the LAKE LA 4/200.

More LAKE LA 4/200manuals & documents

In this document

Advantages

The propeller offers best vibration damping, erosion protection, reduced take-off distance, unchanged climb and cruise performance, unlimited blade life, and significant noise reductions.

STC Kit Contents

The kit includes a 3-blade constant speed propeller, a full composite spinner, an airplane flight manual supplement, installation instructions, and an operation and installation manual.

Propeller Specifications

The propeller is designated MTV-12-B/LD188-119a, features a milled single-piece aluminum hub, and has a blade design made of lightweight natural composite.

Engine Compatibility

The propeller is compatible with Lycoming IO-360-A1B and IO-360-A1B6 engines.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Full document text

Advantages: • Best vibration damping characteristics for almost vibration free propeller operations • Bonded on stainless steel leading edge for best erosion protection of the blades • Shorter take-off distance by approx. -5% (SL, ISA conditions) • Climb and cruise performance unchanged • Unlimited blade life • Significant inside and outside noise reductions STC Kit Contents: FAA STC: SA00156BO • One 3-Blade Constant Speed Propeller MTV-12-B/LD188-119a • One Full Composite Spinner (AFRP) P-501-2, P-501-3 • One Airplane Flight Manual Supplement Doc. No. E-957 • One Installation Instruction Doc. No. E-958 • One Operation and Installation Manual ATA 61-01-24 (E-124) Propeller Specifications: • Full Propeller Designation MTV-12-B/LD188-119a • Propeller Hub MTV-12-B Milled single-piece aluminum hub • Blade LD188-119a • Blade Design Light-weight natural composite • Installed Propeller & Spinner Weight 63 lbs • Maximum Diameter 74 in. • Minimum Diameter 74 in. • TBO (whichever occurs first) 1800 hrs / 72 month Replaces: 2-Blade Hartzell HC-C2YK-1BL/L7666-2 Lake LA-4-200 Engine: Lycoming IO-360-A1B, IO-360-A1B6 To learn more about this prop 866-717-1117 www.Flight-Resource.com A Division of World’s Largest MT-Propeller Distributor For other products 800-544-8594 www.McFarlaneAviation.com