LEARJET 31A CHECKLIST PROCEDURES FLASH CARDS

Full document text

LEARJET 31A CHECKLIST PROCEDURES FLASH CARDS Copyright © 2011, FlightSafety International, Inc. Unauthorized reproduction or distribution is prohibited. All rights reserved. Revision 0.1 INSERT LATEST REVISED CARDS, DESTROY SUPERSEDED CARDS LIST OF EFFECTIVE CARDS Dates of issue for original and changed cards are: Original ..........0 ......................... JULY 2011 Revision .........0.1 .............. JANUARY 2012 TOTAL NUMBER OF CARDS IN THIS SET IS 32 CONSISTING OF THE FOLLOWING: *Zero in this column indicates an original card. Card *Revision No. No. Title....................................................... 0.1 ii ............................................................ 0.1 CL-1—CL-10A...................................... 0.1 CL-11—CL-11A....................................... 0 CL-12—CL-15A.................................... 0.1 Revision 0.1 FOR TRAINING PURPOSES ONLY ii Card *Revision No. No. Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-1 Windshield Ice Detect Lights Check Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-1A Windshield Ice Detect Lights Check 1. Check illuminated by placing an object between the lights and wind- shield, use care to prevent scratching windshield when checking Ice Detect Lights. Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-2 Takeoff Warning System Check Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-2A Takeoff Warning System Check 1. Check horn. Advance R Thrust Lever and note that warning horn sounds. Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-3 Landing Gear Warning Lights Test Checklist Procedures Learjet 31A FOR TRAINING PURPOSES ONLY CL-3A Landing Gear Warning Lights Test 1. Check three (3) green DOWN lights illuminated 2. SYSTEM TEST Selector Switch................ Rotate to GEAR, depress and hold. Check horn sounds and amber MUTE and three (3) red UNSAFE lights illuminated. 3. TEST Button.......................................................................... Release Revision 0.1 Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-4 Fire Detect System Test Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-4A Fire Detect System Test 1. SYSTEM TEST Selector Switch ......................... Rotate to FIRE DET 2. TEST Button ......................................................................... Depress ENG FIRE PULL T-Handle shall illumi- nate and flash. This indicates continuity of the fire detect system. 3. TEST Button.......................................................................... Release Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-5 Air Data System Check Test Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-5A Air Data System Check Test 1. SYSTEM TEST Selector Switch ................................. Rotate to ADC 2. Momentarily depress TEST button. The pilot’s system will test and the overspeed warning will sound, then the copilot’s system will test and the overspeed warning will sound. Air data instruments (air speed/Mach, altimeter/vertical speed and SAT/TAS) will display 8’s. Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-6 Cabin Altitude Warning Check Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-6A Cabin Altitude Warning Check 1. SYSTEM TEST Selector Switch.............. Rotate to CABIN ALT, then depress and hold TEST button. Cabin altitude warning horn shall sound. 2. Thrust Lever MUTE Switch ............................... Momentarily engage 3. TEST Button.......................................................................... Release Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-7 Stall Warning System Check Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-7A Stall Warning System Check 1. SYSTEM TEST Selector Switch.............. Rotate to L STALL, then depress and hold TEST button. The pilot’s angle-of-attack indicator needle will begin to sweep from the green segment to the red segment. As the needle passes the green-yellow mar- gin, the shaker will actuate, the MSTR WARN lights will illuminate, and the red L STALL warning light shall flash. Shaker actuation is made evident by high- frequency vibration of the control column. Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-8 Mach Trim Test Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-8A Mach Trim Test 1. SYSTEM TEST Selector Switch .................... Rotate to MACH TRIM 2. Depress and hold TEST button. The stabilizer should trim slowly in the nose up direction for 1 to 3 seconds and then stop. The trim-in- motion audio clicker may or may not sound. The amber MACH TRIM light shall illuminate. 3. TEST Button.......................................................................... Release Amber MACH TRIM light shall go out. Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-9 Trim Monitor Check Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-9A Trim Monitor Check 1. SYSTEM TEST Selector Switch ...................... Rotate to TRIM MON 2. TEST Button ......................................................................... Depress Amber PITCH TRIM light shall illuminate. 3. TEST Button.......................................................................... Release Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-10 Trim Speed Check Checklist Procedures Learjet 31A Revision 0.1 FOR TRAINING PURPOSES ONLY CL-10A Trim Speed Check 1. SYSTEM TEST Selector Switch ................ Rotate to TRIM OVRSPD 2. While trimming NOSE UP or NOSE DN with either Control Wheel Trim