Beechcraft Baron 58P/58TC
Beechcraft 58TC Baron · Systems Description
Overview
This document is a service bulletin for the Beechcraft Baron 58P and 58TC models, specifically addressing the Continental TSIO-520-L engines with serial numbers ranging from 508000 to 508261. It outlines critical inspection procedures for the turbocharger system, including checks for cracks, wall thickness, and overall integrity of various components. The bulletin mandates inspections every 25 hours of operation until specific part numbers are installed, ensuring the safety and reliability of the aircraft's engine system. This document is essential for maintenance personnel and operators of the Baron 58P and 58TC to ensure compliance with airworthiness directives and to maintain optimal engine performance.
- Inspections of the turbocharger system are required every 25 hours of operation.
- Minimum wall thickness for the turbo adapter is .075 inches; replace if less.
- Inspect for cracks in elbows and turbo adapter; replace if found.
- Check joints for freedom of movement and distortion during inspections.
- Inspect tailpipe for thinning and internal corrosion.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
Document
Source
Copy found at www.acornwelding.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Systems Description
- Year ·
- 2010
- Pages ·
- 1
- File size ·
- 285 KB
- Copy found at ·
- www.acornwelding.com
What is the Beechcraft Baron 58P/58TC?
The Beechcraft Baron 58P/58TC is a systems description for the Beechcraft 58TC Baron, dated 2010.
How many pages is the Beechcraft Baron 58P/58TC?
The copy of the Beechcraft Baron 58P/58TC on file runs 1 pages.
What year was the Beechcraft Baron 58P/58TC published?
The Beechcraft Baron 58P/58TC — the Beechcraft 58TC Baron systems description on file — is dated 2010.
Common. More common than 99% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the Beechcraft 58TC Baron.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
Beechcraft 58TC Baron for sale now
Free — save the 58 to your watchlist and track it in one place.
More Beechcraft 58TC Baronmanuals & documents
- Beechcraft 58TC Baron Model GuideModel Guide
- Airworthiness Directive AD/BEECH 55/79 Amdt 7Maintenance Manual
- ATSB Transport Safety Report - Aviation Occurrence Investigation (Defined) AO-2022-026Other Documents
- Beechcraft Bonanza, Debonair, Travel Air, Baron Prebuy Examination—Scope and DetailChecklist
- AAIB Bulletin: 12/2013Other Documents
- ENGINE CONTROLS - THROTTLE WARNING/GEAR RETRACTION PREVENTION CAM INSPECTION/INSTALLATIONMaintenance Manual
- FUSELAGE – 5TH AND 6TH SEAT ATTACHMENT IMPROVEMENTParts Catalog
- Beechcraft Baron SSPSystems Description
- Baron & Bonanza StretcherWeight & Balance
- INSTALLATION GUIDE REPLACEMENT OF FUEL FILLER CAP WASHERMaintenance Manual
- Beechcraft 58TC Baron Pilot's Operating HandbookPilot's Operating Handbook
Related documents
- Beechcraft Baron 55/58 Systems DescriptionBeechcraft 55 Baron · Systems Description
- Beechcraft Baron 55/58 With 2.5” Attached TailpipeBeechcraft G58 Baron · Systems Description
- TCM SB10-1Cessna 400 Corvalis TT · Systems Description
- Beech Duke 60/A60 Systems DescriptionBeechcraft 60 Duke · Systems Description
- Beechcraft Duchess 76Beechcraft 76 Duchess · Systems Description
If you fly the Beechcraft 58TC Baron, you may also be researching these.
In this document
Inspection Requirements
The service bulletin specifies that inspections of the turbocharger system must be conducted every 25 hours of operation. This includes checking elbows and the turbo adapter for cracks, as well as verifying that the turbo adapter maintains a minimum wall thickness of .075 inches. Any components found to be below this specification must be replaced.
Component Inspection
Operators are instructed to inspect joints for freedom of movement and distortion, as well as to examine the tailpipe for thinning and internal corrosion. Additionally, the turbo header should be checked for internal pitting, warping, or cracking of the flow divider, and any thin sections should be noted.
Parts List
The document includes a detailed parts list for the exhaust system and engine mounts, providing part numbers and descriptions for various components such as risers, elbows, flanges, and gaskets. This list is crucial for maintenance personnel to ensure they have the correct parts for replacements.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Safety notes
- Failure to perform required inspections may lead to engine failure.
- Using components below specified thickness can compromise engine safety.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Full document text
Beechcraft Baron 58P/58TC AD 76-13-09 Applies to Continental TSIO-520-L engines S/N's 508000 thru 508164 and 508166 thru 508261. Inspect elbows and turbo adapter for cracks and replace if cracks found. Inspect turbo adapter for minimum .075” wall thickness, replace if less than .075”. Inspection required every 25 hrs of operation till P/N's 642067 and 642066 installed. 6 5 7 12 8 11 9 10 3 4 1 2 2 12 Inspect joints for freedom of movement and distortion. Inspect tailpipe for thinning and internal corrosion. Inspect turbo header for internal pitting, warped or cracked flow divider, and thin sections. Item Part Number Description 640705 RISER RIGHT HAND FWD CYL #5 640704 RISER RIGHT HAND CTR CYL #3 640704 RISER RIGHT HAND AFT CYL #1 640707 RISER LEFT HAND FWD CYL #6 640677 RISER LEFT HAND CTR CYL #4 640706 RISER LEFT HAND AFT CYL #2 640710 ELBOW RIGHT HAND 640711 FLANGE RIGHT HAND 642067 ELBOW LEFT HAND 642066 FLANGE LEFT HAND 640712 HEADER 102-950001-15 TAILPIPE 653832 CLAMP HEADER TO FLANGE 640877 GASKET HEADER TO FLANGE NH1000897-50 TAILPIPE CLAMP 628260 GASKET 102-910026-1 ENGINE MOUNT 102-910026-3 ENGINE MOUNT 102-910026-131 ENGINE MOUNT J-12453-12 SHOCK MOUNTS VARIOUS SEAT BASES 1 2 2 3 4 5 6 7 8 9 10 11 12 - - - - - - - - Exhaust Systems Engine Mounts Carb Air Boxes Shrouds Seats Piston Turbine Radial Vintage And More... L E L N E C C E X E (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com (toll free) 1-888-388-8803 1-780-447-5955 Fax: 1-780-447-5980 sales@acornwelding.com parts@acornwelding.com www.acornwelding.com ©2010 Acorn Welding Ltd.